diff options
Diffstat (limited to 'drivers/net')
| -rw-r--r-- | drivers/net/skge.h | 150 |
1 files changed, 75 insertions, 75 deletions
diff --git a/drivers/net/skge.h b/drivers/net/skge.h index 23e5275d920..f6223c533c0 100644 --- a/drivers/net/skge.h +++ b/drivers/net/skge.h @@ -389,10 +389,10 @@ enum { /* Packet Arbiter Registers */ /* B3_PA_CTRL 16 bit Packet Arbiter Ctrl Register */ enum { - PA_CLR_TO_TX2 = 1<<13, /* Clear IRQ Packet Timeout TX2 */ - PA_CLR_TO_TX1 = 1<<12, /* Clear IRQ Packet Timeout TX1 */ - PA_CLR_TO_RX2 = 1<<11, /* Clear IRQ Packet Timeout RX2 */ - PA_CLR_TO_RX1 = 1<<10, /* Clear IRQ Packet Timeout RX1 */ + PA_CLR_TO_TX2 = 1<<13,/* Clear IRQ Packet Timeout TX2 */ + PA_CLR_TO_TX1 = 1<<12,/* Clear IRQ Packet Timeout TX1 */ + PA_CLR_TO_RX2 = 1<<11,/* Clear IRQ Packet Timeout RX2 */ + PA_CLR_TO_RX1 = 1<<10,/* Clear IRQ Packet Timeout RX1 */ PA_ENA_TO_TX2 = 1<<9, /* Enable Timeout Timer TX2 */ PA_DIS_TO_TX2 = 1<<8, /* Disable Timeout Timer TX2 */ PA_ENA_TO_TX1 = 1<<7, /* Enable Timeout Timer TX1 */ @@ -481,14 +481,14 @@ enum { /* RAM Buffer Register Offsets */ enum { - RB_START = 0x00,/* 32 bit RAM Buffer Start Address */ + RB_START= 0x00,/* 32 bit RAM Buffer Start Address */ RB_END = 0x04,/* 32 bit RAM Buffer End Address */ RB_WP = 0x08,/* 32 bit RAM Buffer Write Pointer */ RB_RP = 0x0c,/* 32 bit RAM Buffer Read Pointer */ - RB_RX_UTPP = 0x10,/* 32 bit Rx Upper Threshold, Pause Packet */ - RB_RX_LTPP = 0x14,/* 32 bit Rx Lower Threshold, Pause Packet */ - RB_RX_UTHP = 0x18,/* 32 bit Rx Upper Threshold, High Prio */ - RB_RX_LTHP = 0x1c,/* 32 bit Rx Lower Threshold, High Prio */ + RB_RX_UTPP= 0x10,/* 32 bit Rx Upper Threshold, Pause Packet */ + RB_RX_LTPP= 0x14,/* 32 bit Rx Lower Threshold, Pause Packet */ + RB_RX_UTHP= 0x18,/* 32 bit Rx Upper Threshold, High Prio */ + RB_RX_LTHP= 0x1c,/* 32 bit Rx Lower Threshold, High Prio */ /* 0x10 - 0x1f: reserved at Tx RAM Buffer Registers */ RB_PC = 0x20,/* 32 bit RAM Buffer Packet Counter */ RB_LEV = 0x24,/* 32 bit RAM Buffer Level Register */ @@ -532,7 +532,7 @@ enum { PHY_ADDR_MARV = 0, }; -#define RB_ADDR(offs, queue) (B16_RAM_REGS + (queue) + (offs)) +#define RB_ADDR(offs, queue) ((u16)B16_RAM_REGS + (u16)(queue) + (offs)) /* Receive MAC FIFO, Receive LED, and Link_Sync regs (GENESIS only) */ enum { @@ -578,15 +578,15 @@ enum { MFF_DIS_TIST = 1<<2, /* Disable Time Stamp Gener */ MFF_CLR_INTIST = 1<<1, /* Clear IRQ No Time Stamp */ MFF_CLR_INSTAT = 1<<0, /* Clear IRQ No Status */ -#define MFF_RX_CTRL_DEF MFF_ENA_TIM_PAT + MFF_RX_CTRL_DEF = MFF_ENA_TIM_PAT, }; /* TX_MFF_CTRL1 16 bit Transmit MAC FIFO Control Reg 1 */ enum { - MFF_CLR_PERR = 1<<15, /* Clear Parity Error IRQ */ - /* Bit 14: reserved */ - MFF_ENA_PKT_REC = 1<<13, /* Enable Packet Recovery */ - MFF_DIS_PKT_REC = 1<<12, /* Disable Packet Recovery */ + MFF_CLR_PERR = 1<<15, /* Clear Parity Error IRQ */ + + MFF_ENA_PKT_REC = 1<<13, /* Enable Packet Recovery */ + MFF_DIS_PKT_REC = 1<<12, /* Disable Packet Recovery */ MFF_ENA_W4E = 1<<7, /* Enable Wait for Empty */ MFF_DIS_W4E = 1<<6, /* Disable Wait for Empty */ @@ -595,9 +595,10 @@ enum { MFF_DIS_LOOPB = 1<<2, /* Disable Loopback */ MFF_CLR_MAC_RST = 1<<1, /* Clear XMAC Reset */ MFF_SET_MAC_RST = 1<<0, /* Set XMAC Reset */ + + MFF_TX_CTRL_DEF = MFF_ENA_PKT_REC | (u16) MFF_ENA_TIM_PAT | MFF_ENA_FLUSH, }; -#define MFF_TX_CTRL_DEF (MFF_ENA_PKT_REC | MFF_ENA_TIM_PAT | MFF_ENA_FLUSH) /* RX_MFF_TST2 8 bit Receive MAC FIFO Test Register 2 */ /* TX_MFF_TST2 8 bit Transmit MAC FIFO Test Register 2 */ @@ -1304,8 +1305,8 @@ enum { /* special defines for FIBER (88E1011S only) */ enum { - PHY_M_AN_ASP_X = 1<<8, /* Asymmetric Pause */ - PHY_M_AN_PC_X = 1<<7, /* MAC Pause implemented */ + PHY_M_AN_ASP_X = 1<<8, /* Asymmetric Pause */ + PHY_M_AN_PC_X = 1<<7, /* MAC Pause implemented */ PHY_M_AN_1000X_AHD = 1<<6, /* Advertise 10000Base-X Half Duplex */ PHY_M_AN_1000X_AFD = 1<<5, /* Advertise 10000Base-X Full Duplex */ }; @@ -1320,7 +1321,7 @@ enum { /***** PHY_MARV_1000T_CTRL 16 bit r/w 1000Base-T Control Reg *****/ enum { - PHY_M_1000C_TEST = 7<<13,/* Bit 15..13: Test Modes */ + PHY_M_1000C_TEST= 7<<13,/* Bit 15..13: Test Modes */ PHY_M_1000C_MSE = 1<<12, /* Manual Master/Slave Enable */ PHY_M_1000C_MSC = 1<<11, /* M/S Configuration (1=Master) */ PHY_M_1000C_MPD = 1<<10, /* Multi-Port Device */ @@ -1349,7 +1350,7 @@ enum { PHY_M_PC_EN_DET_PLUS = 3<<8, /* Energy Detect Plus (Mode 2) */ }; -#define PHY_M_PC_MDI_XMODE(x) (((x)<<5) & PHY_M_PC_MDIX_MSK) +#define PHY_M_PC_MDI_XMODE(x) ((((u16)(x)<<5) & PHY_M_PC_MDIX_MSK) enum { PHY_M_PC_MAN_MDI = 0, /* 00 = Manual MDI configuration */ @@ -1432,24 +1433,24 @@ enum { PHY_M_EC_DIS_LINK_P = 1<<12, /* Disable Link Pulses (88E1111 only) */ PHY_M_EC_M_DSC_MSK = 3<<10, /* Bit 11..10: Master Downshift Counter */ /* (88E1011 only) */ - PHY_M_EC_S_DSC_MSK = 3<<8,/* Bit 9.. 8: Slave Downshift Counter */ + PHY_M_EC_S_DSC_MSK = 3<<8, /* Bit 9.. 8: Slave Downshift Counter */ /* (88E1011 only) */ - PHY_M_EC_M_DSC_MSK2 = 7<<9,/* Bit 11.. 9: Master Downshift Counter */ + PHY_M_EC_M_DSC_MSK2 = 7<<9, /* Bit 11.. 9: Master Downshift Counter */ /* (88E1111 only) */ - PHY_M_EC_DOWN_S_ENA = 1<<8, /* Downshift Enable (88E1111 only) */ + PHY_M_EC_DOWN_S_ENA = 1<<8, /* Downshift Enable (88E1111 only) */ /* !!! Errata in spec. (1 = disable) */ - PHY_M_EC_RX_TIM_CT = 1<<7, /* RGMII Rx Timing Control*/ - PHY_M_EC_MAC_S_MSK = 7<<4,/* Bit 6.. 4: Def. MAC interface speed */ - PHY_M_EC_FIB_AN_ENA = 1<<3, /* Fiber Auto-Neg. Enable (88E1011S only) */ - PHY_M_EC_DTE_D_ENA = 1<<2, /* DTE Detect Enable (88E1111 only) */ - PHY_M_EC_TX_TIM_CT = 1<<1, /* RGMII Tx Timing Control */ - PHY_M_EC_TRANS_DIS = 1<<0, /* Transmitter Disable (88E1111 only) */}; - -#define PHY_M_EC_M_DSC(x) ((x)<<10) /* 00=1x; 01=2x; 10=3x; 11=4x */ -#define PHY_M_EC_S_DSC(x) ((x)<<8) /* 00=dis; 01=1x; 10=2x; 11=3x */ -#define PHY_M_EC_MAC_S(x) ((x)<<4) /* 01X=0; 110=2.5; 111=25 (MHz) */ - -#define PHY_M_EC_M_DSC_2(x) ((x)<<9) /* 000=1x; 001=2x; 010=3x; 011=4x */ + PHY_M_EC_RX_TIM_CT = 1<<7, /* RGMII Rx Timing Control*/ + PHY_M_EC_MAC_S_MSK = 7<<4, /* Bit 6.. 4: Def. MAC interface speed */ + PHY_M_EC_FIB_AN_ENA = 1<<3, /* Fiber Auto-Neg. Enable (88E1011S only) */ + PHY_M_EC_DTE_D_ENA = 1<<2, /* DTE Detect Enable (88E1111 only) */ + PHY_M_EC_TX_TIM_CT = 1<<1, /* RGMII Tx Timing Control */ + PHY_M_EC_TRANS_DIS = 1<<0, /* Transmitter Disable (88E1111 only) */}; + +#define PHY_M_EC_M_DSC(x) ((u16)(x)<<10) /* 00=1x; 01=2x; 10=3x; 11=4x */ +#define PHY_M_EC_S_DSC(x) ((u16)(x)<<8) /* 00=dis; 01=1x; 10=2x; 11=3x */ +#define PHY_M_EC_MAC_S(x) ((u16)(x)<<4) /* 01X=0; 110=2.5; 111=25 (MHz) */ + +#define PHY_M_EC_M_DSC_2(x) ((u16)(x)<<9) /* 000=1x; 001=2x; 010=3x; 011=4x */ /* 100=5x; 101=6x; 110=7x; 111=8x */ enum { MAC_TX_CLK_0_MHZ = 2, @@ -1468,10 +1469,12 @@ enum { PHY_M_LEDC_LK_C_MSK = 7<<3,/* Bit 5.. 3: Link Control Mask */ /* (88E1111 only) */ }; +#define PHY_M_LED_PULS_DUR(x) (((u16)(x)<<12) & PHY_M_LEDC_PULS_MSK) +#define PHY_M_LED_BLINK_RT(x) (((u16)(x)<<8) & PHY_M_LEDC_BL_R_MSK) enum { - PHY_M_LEDC_LINK_MSK = 3<<3,/* Bit 4.. 3: Link Control Mask */ - /* (88E1011 only) */ + PHY_M_LEDC_LINK_MSK = 3<<3, /* Bit 4.. 3: Link Control Mask */ + /* (88E1011 only) */ PHY_M_LEDC_DP_CTRL = 1<<2, /* Duplex Control */ PHY_M_LEDC_DP_C_MSB = 1<<2, /* Duplex Control (MSB, 88E1111 only) */ PHY_M_LEDC_RX_CTRL = 1<<1, /* Rx Activity / Link */ @@ -1479,27 +1482,24 @@ enum { PHY_M_LEDC_TX_C_MSB = 1<<0, /* Tx Control (MSB, 88E1111 only) */ }; -#define PHY_M_LED_PULS_DUR(x) (((x)<<12) & PHY_M_LEDC_PULS_MSK) - enum { - PULS_NO_STR = 0,/* no pulse stretching */ - PULS_21MS = 1,/* 21 ms to 42 ms */ - PULS_42MS = 2,/* 42 ms to 84 ms */ - PULS_84MS = 3,/* 84 ms to 170 ms */ - PULS_170MS = 4,/* 170 ms to 340 ms */ - PULS_340MS = 5,/* 340 ms to 670 ms */ - PULS_670MS = 6,/* 670 ms to 1.3 s */ - PULS_1300MS = 7,/* 1.3 s to 2.7 s */ + PULS_NO_STR = 0, /* no pulse stretching */ + PULS_21MS = 1, /* 21 ms to 42 ms */ + PULS_42MS = 2, /* 42 ms to 84 ms */ + PULS_84MS = 3, /* 84 ms to 170 ms */ + PULS_170MS = 4, /* 170 ms to 340 ms */ + PULS_340MS = 5, /* 340 ms to 670 ms */ + PULS_670MS = 6, /* 670 ms to 1.3 s */ + PULS_1300MS = 7, /* 1.3 s to 2.7 s */ }; -#define PHY_M_LED_BLINK_RT(x) (((x)<<8) & PHY_M_LEDC_BL_R_MSK) enum { - BLINK_42MS = 0,/* 42 ms */ - BLINK_84MS = 1,/* 84 ms */ - BLINK_170MS = 2,/* 170 ms */ - BLINK_340MS = 3,/* 340 ms */ - BLINK_670MS = 4,/* 670 ms */ + BLINK_42MS = 0, /* 42 ms */ + BLINK_84MS = 1, /* 84 ms */ + BLINK_170MS = 2, /* 170 ms */ + BLINK_340MS = 3, /* 340 ms */ + BLINK_670MS = 4, /* 670 ms */ }; /***** PHY_MARV_LED_OVER 16 bit r/w Manual LED Override Reg *****/ @@ -1525,7 +1525,7 @@ enum { PHY_M_EC2_FO_IMPED = 1<<5, /* Fiber Output Impedance */ PHY_M_EC2_FO_M_CLK = 1<<4, /* Fiber Mode Clock Enable */ PHY_M_EC2_FO_BOOST = 1<<3, /* Fiber Output Boost */ - PHY_M_EC2_FO_AM_MSK = 7,/* Bit 2.. 0: Fiber Output Amplitude */ + PHY_M_EC2_FO_AM_MSK = 7, /* Bit 2.. 0: Fiber Output Amplitude */ }; /***** PHY_MARV_EXT_P_STAT 16 bit r/w Ext. PHY Specific Status *****/ @@ -1550,7 +1550,7 @@ enum { PHY_M_CABD_DIS_WAIT = 1<<15, /* Disable Waiting Period (Page 1) */ /* (88E1111 only) */ PHY_M_CABD_STAT_MSK = 3<<13, /* Bit 14..13: Status Mask */ - PHY_M_CABD_AMPL_MSK = 0x1f<<8,/* Bit 12.. 8: Amplitude Mask */ + PHY_M_CABD_AMPL_MSK = 0x1f<<8, /* Bit 12.. 8: Amplitude Mask */ /* (88E1111 only) */ PHY_M_CABD_DIST_MSK = 0xff, /* Bit 7.. 0: Distance Mask */ }; @@ -1605,9 +1605,9 @@ enum { /***** PHY_MARV_PHY_CTRL (page 3) 16 bit r/w LED Control Reg. *****/ enum { - PHY_M_LEDC_LOS_MSK = 0xf<<12,/* Bit 15..12: LOS LED Ctrl. Mask */ + PHY_M_LEDC_LOS_MSK = 0xf<<12, /* Bit 15..12: LOS LED Ctrl. Mask */ PHY_M_LEDC_INIT_MSK = 0xf<<8, /* Bit 11.. 8: INIT LED Ctrl. Mask */ - PHY_M_LEDC_STA1_MSK = 0xf<<4,/* Bit 7.. 4: STAT1 LED Ctrl. Mask */ + PHY_M_LEDC_STA1_MSK = 0xf<<4, /* Bit 7.. 4: STAT1 LED Ctrl. Mask */ PHY_M_LEDC_STA0_MSK = 0xf, /* Bit 3.. 0: STAT0 LED Ctrl. Mask */ }; @@ -1804,8 +1804,8 @@ enum { /* GM_SMI_CTRL 16 bit r/w SMI Control Register */ enum { - GM_SMI_CT_PHY_A_MSK = 0x1f<<11,/* Bit 15..11: PHY Device Address */ - GM_SMI_CT_REG_A_MSK = 0x1f<<6,/* Bit 10.. 6: PHY Register Address */ + GM_SMI_CT_PHY_A_MSK = 0x1f<<11, /* Bit 15..11: PHY Device Address */ + GM_SMI_CT_REG_A_MSK = 0x1f<<6, /* Bit 10.. 6: PHY Register Address */ GM_SMI_CT_OP_RD = 1<<5, /* Bit 5: OpCode Read (0=Write)*/ GM_SMI_CT_RD_VAL = 1<<4, /* Bit 4: Read Valid (Read completed) */ GM_SMI_CT_BUSY = 1<<3, /* Bit 3: Busy (Operation in progress) */ @@ -1875,9 +1875,9 @@ enum { /* TX_GMF_CTRL_T 32 bit Tx GMAC FIFO Control/Test */ enum { - GMF_WSP_TST_ON = 1<<18,/* Write Shadow Pointer Test On */ - GMF_WSP_TST_OFF = 1<<17,/* Write Shadow Pointer Test Off */ - GMF_WSP_STEP = 1<<16,/* Write Shadow Pointer Step/Increment */ + GMF_WSP_TST_ON = 1<<18, /* Write Shadow Pointer Test On */ + GMF_WSP_TST_OFF = 1<<17, /* Write Shadow Pointer Test Off */ + GMF_WSP_STEP = 1<<16, /* Write Shadow Pointer Step/Increment */ GMF_CLI_TX_FU = 1<<6, /* Clear IRQ Tx FIFO Underrun */ GMF_CLI_TX_FC = 1<<5, /* Clear IRQ Tx Frame Complete */ @@ -2111,18 +2111,18 @@ enum { /* XM_MMU_CMD 16 bit r/w MMU Command Register */ enum { - XM_MMU_PHY_RDY = 1<<12,/* Bit 12: PHY Read Ready */ - XM_MMU_PHY_BUSY = 1<<11,/* Bit 11: PHY Busy */ - XM_MMU_IGN_PF = 1<<10,/* Bit 10: Ignore Pause Frame */ - XM_MMU_MAC_LB = 1<<9, /* Bit 9: Enable MAC Loopback */ - XM_MMU_FRC_COL = 1<<7, /* Bit 7: Force Collision */ - XM_MMU_SIM_COL = 1<<6, /* Bit 6: Simulate Collision */ - XM_MMU_NO_PRE = 1<<5, /* Bit 5: No MDIO Preamble */ - XM_MMU_GMII_FD = 1<<4, /* Bit 4: GMII uses Full Duplex */ - XM_MMU_RAT_CTRL = 1<<3, /* Bit 3: Enable Rate Control */ - XM_MMU_GMII_LOOP= 1<<2, /* Bit 2: PHY is in Loopback Mode */ - XM_MMU_ENA_RX = 1<<1, /* Bit 1: Enable Receiver */ - XM_MMU_ENA_TX = 1<<0, /* Bit 0: Enable Transmitter */ + XM_MMU_PHY_RDY = 1<<12, /* Bit 12: PHY Read Ready */ + XM_MMU_PHY_BUSY = 1<<11, /* Bit 11: PHY Busy */ + XM_MMU_IGN_PF = 1<<10, /* Bit 10: Ignore Pause Frame */ + XM_MMU_MAC_LB = 1<<9, /* Bit 9: Enable MAC Loopback */ + XM_MMU_FRC_COL = 1<<7, /* Bit 7: Force Collision */ + XM_MMU_SIM_COL = 1<<6, /* Bit 6: Simulate Collision */ + XM_MMU_NO_PRE = 1<<5, /* Bit 5: No MDIO Preamble */ + XM_MMU_GMII_FD = 1<<4, /* Bit 4: GMII uses Full Duplex */ + XM_MMU_RAT_CTRL = 1<<3, /* Bit 3: Enable Rate Control */ + XM_MMU_GMII_LOOP= 1<<2, /* Bit 2: PHY is in Loopback Mode */ + XM_MMU_ENA_RX = 1<<1, /* Bit 1: Enable Receiver */ + XM_MMU_ENA_TX = 1<<0, /* Bit 0: Enable Transmitter */ }; @@ -2506,7 +2506,7 @@ static inline void skge_write8(const struct skge_hw *hw, int reg, u8 val) } /* MAC Related Registers inside the device. */ -#define SK_REG(port,reg) (((port)<<7)+(reg)) +#define SK_REG(port,reg) (((port)<<7)+(u16)(reg)) #define SK_XMAC_REG(port, reg) \ ((BASE_XMAC_1 + (port) * (BASE_XMAC_2 - BASE_XMAC_1)) | (reg) << 1) |