aboutsummaryrefslogtreecommitdiff
path: root/drivers/scsi/53c700.h
diff options
context:
space:
mode:
Diffstat (limited to 'drivers/scsi/53c700.h')
-rw-r--r--drivers/scsi/53c700.h649
1 files changed, 649 insertions, 0 deletions
diff --git a/drivers/scsi/53c700.h b/drivers/scsi/53c700.h
new file mode 100644
index 00000000000..df4aa30ae0a
--- /dev/null
+++ b/drivers/scsi/53c700.h
@@ -0,0 +1,649 @@
+/* -*- mode: c; c-basic-offset: 8 -*- */
+
+/* Driver for 53c700 and 53c700-66 chips from NCR and Symbios
+ *
+ * Copyright (C) 2001 by James.Bottomley@HansenPartnership.com
+ */
+
+#ifndef _53C700_H
+#define _53C700_H
+
+#include <linux/interrupt.h>
+#include <asm/io.h>
+
+#include <scsi/scsi_device.h>
+
+
+#if defined(CONFIG_53C700_MEM_MAPPED) && defined(CONFIG_53C700_IO_MAPPED)
+#define CONFIG_53C700_BOTH_MAPPED
+#endif
+
+/* Turn on for general debugging---too verbose for normal use */
+#undef NCR_700_DEBUG
+/* Debug the tag queues, checking hash queue allocation and deallocation
+ * and search for duplicate tags */
+#undef NCR_700_TAG_DEBUG
+
+#ifdef NCR_700_DEBUG
+#define DEBUG(x) printk x
+#else
+#define DEBUG(x)
+#endif
+
+/* The number of available command slots */
+#define NCR_700_COMMAND_SLOTS_PER_HOST 64
+/* The maximum number of Scatter Gathers we allow */
+#define NCR_700_SG_SEGMENTS 32
+/* The maximum number of luns (make this of the form 2^n) */
+#define NCR_700_MAX_LUNS 32
+#define NCR_700_LUN_MASK (NCR_700_MAX_LUNS - 1)
+/* Maximum number of tags the driver ever allows per device */
+#define NCR_700_MAX_TAGS 16
+/* Tag depth the driver starts out with (can be altered in sysfs) */
+#define NCR_700_DEFAULT_TAGS 4
+/* This is the default number of commands per LUN in the untagged case.
+ * two is a good value because it means we can have one command active and
+ * one command fully prepared and waiting
+ */
+#define NCR_700_CMD_PER_LUN 2
+/* magic byte identifying an internally generated REQUEST_SENSE command */
+#define NCR_700_INTERNAL_SENSE_MAGIC 0x42
+
+/* WARNING: Leave this in for now: the dependency preprocessor doesn't
+ * pick up file specific flags, so must define here if they are not
+ * set */
+#if !defined(CONFIG_53C700_IO_MAPPED) && !defined(CONFIG_53C700_MEM_MAPPED)
+#error "Config.in must define either CONFIG_53C700_IO_MAPPED or CONFIG_53C700_MEM_MAPPED to use this scsi core."
+#endif
+
+struct NCR_700_Host_Parameters;
+
+/* These are the externally used routines */
+struct Scsi_Host *NCR_700_detect(struct scsi_host_template *,
+ struct NCR_700_Host_Parameters *, struct device *);
+int NCR_700_release(struct Scsi_Host *host);
+irqreturn_t NCR_700_intr(int, void *, struct pt_regs *);
+
+
+enum NCR_700_Host_State {
+ NCR_700_HOST_BUSY,
+ NCR_700_HOST_FREE,
+};
+
+struct NCR_700_SG_List {
+ /* The following is a script fragment to move the buffer onto the
+ * bus and then link the next fragment or return */
+ #define SCRIPT_MOVE_DATA_IN 0x09000000
+ #define SCRIPT_MOVE_DATA_OUT 0x08000000
+ __u32 ins;
+ __u32 pAddr;
+ #define SCRIPT_NOP 0x80000000
+ #define SCRIPT_RETURN 0x90080000
+};
+
+/* We use device->hostdata to store negotiated parameters. This is
+ * supposed to be a pointer to a device private area, but we cannot
+ * really use it as such since it will never be freed, so just use the
+ * 32 bits to cram the information. The SYNC negotiation sequence looks
+ * like:
+ *
+ * If DEV_NEGOTIATED_SYNC not set, tack and SDTR message on to the
+ * initial identify for the device and set DEV_BEGIN_SYNC_NEGOTATION
+ * If we get an SDTR reply, work out the SXFER parameters, squirrel
+ * them away here, clear DEV_BEGIN_SYNC_NEGOTIATION and set
+ * DEV_NEGOTIATED_SYNC. If we get a REJECT msg, squirrel
+ *
+ *
+ * 0:7 SXFER_REG negotiated value for this device
+ * 8:15 Current queue depth
+ * 16 negotiated SYNC flag
+ * 17 begin SYNC negotiation flag
+ * 18 device supports tag queueing */
+#define NCR_700_DEV_NEGOTIATED_SYNC (1<<16)
+#define NCR_700_DEV_BEGIN_SYNC_NEGOTIATION (1<<17)
+#define NCR_700_DEV_PRINT_SYNC_NEGOTIATION (1<<19)
+
+static inline void
+NCR_700_set_depth(struct scsi_device *SDp, __u8 depth)
+{
+ long l = (long)SDp->hostdata;
+
+ l &= 0xffff00ff;
+ l |= 0xff00 & (depth << 8);
+ SDp->hostdata = (void *)l;
+}
+static inline __u8
+NCR_700_get_depth(struct scsi_device *SDp)
+{
+ return ((((unsigned long)SDp->hostdata) & 0xff00)>>8);
+}
+static inline int
+NCR_700_is_flag_set(struct scsi_device *SDp, __u32 flag)
+{
+ return (spi_flags(SDp->sdev_target) & flag) == flag;
+}
+static inline int
+NCR_700_is_flag_clear(struct scsi_device *SDp, __u32 flag)
+{
+ return (spi_flags(SDp->sdev_target) & flag) == 0;
+}
+static inline void
+NCR_700_set_flag(struct scsi_device *SDp, __u32 flag)
+{
+ spi_flags(SDp->sdev_target) |= flag;
+}
+static inline void
+NCR_700_clear_flag(struct scsi_device *SDp, __u32 flag)
+{
+ spi_flags(SDp->sdev_target) &= ~flag;
+}
+
+enum NCR_700_tag_neg_state {
+ NCR_700_START_TAG_NEGOTIATION = 0,
+ NCR_700_DURING_TAG_NEGOTIATION = 1,
+ NCR_700_FINISHED_TAG_NEGOTIATION = 2,
+};
+
+static inline enum NCR_700_tag_neg_state
+NCR_700_get_tag_neg_state(struct scsi_device *SDp)
+{
+ return (enum NCR_700_tag_neg_state)((spi_flags(SDp->sdev_target)>>20) & 0x3);
+}
+
+static inline void
+NCR_700_set_tag_neg_state(struct scsi_device *SDp,
+ enum NCR_700_tag_neg_state state)
+{
+ /* clear the slot */
+ spi_flags(SDp->sdev_target) &= ~(0x3 << 20);
+ spi_flags(SDp->sdev_target) |= ((__u32)state) << 20;
+}
+
+struct NCR_700_command_slot {
+ struct NCR_700_SG_List SG[NCR_700_SG_SEGMENTS+1];
+ struct NCR_700_SG_List *pSG;
+ #define NCR_700_SLOT_MASK 0xFC
+ #define NCR_700_SLOT_MAGIC 0xb8
+ #define NCR_700_SLOT_FREE (0|NCR_700_SLOT_MAGIC) /* slot may be used */
+ #define NCR_700_SLOT_BUSY (1|NCR_700_SLOT_MAGIC) /* slot has command active on HA */
+ #define NCR_700_SLOT_QUEUED (2|NCR_700_SLOT_MAGIC) /* slot has command to be made active on HA */
+ __u8 state;
+ int tag;
+ __u32 resume_offset;
+ struct scsi_cmnd *cmnd;
+ /* The pci_mapped address of the actual command in cmnd */
+ dma_addr_t pCmd;
+ __u32 temp;
+ /* if this command is a pci_single mapping, holds the dma address
+ * for later unmapping in the done routine */
+ dma_addr_t dma_handle;
+ /* historical remnant, now used to link free commands */
+ struct NCR_700_command_slot *ITL_forw;
+};
+
+struct NCR_700_Host_Parameters {
+ /* These must be filled in by the calling driver */
+ int clock; /* board clock speed in MHz */
+ unsigned long base; /* the base for the port (copied to host) */
+ struct device *dev;
+ __u32 dmode_extra; /* adjustable bus settings */
+ __u32 differential:1; /* if we are differential */
+#ifdef CONFIG_53C700_LE_ON_BE
+ /* This option is for HP only. Set it if your chip is wired for
+ * little endian on this platform (which is big endian) */
+ __u32 force_le_on_be:1;
+#endif
+ __u32 chip710:1; /* set if really a 710 not 700 */
+ __u32 burst_disable:1; /* set to 1 to disable 710 bursting */
+
+ /* NOTHING BELOW HERE NEEDS ALTERING */
+ __u32 fast:1; /* if we can alter the SCSI bus clock
+ speed (so can negiotiate sync) */
+#ifdef CONFIG_53C700_BOTH_MAPPED
+ __u32 mem_mapped; /* set if memory mapped */
+#endif
+ int sync_clock; /* The speed of the SYNC core */
+
+ __u32 *script; /* pointer to script location */
+ __u32 pScript; /* physical mem addr of script */
+
+ enum NCR_700_Host_State state; /* protected by state lock */
+ struct scsi_cmnd *cmd;
+ /* Note: pScript contains the single consistent block of
+ * memory. All the msgin, msgout and status are allocated in
+ * this memory too (at separate cache lines). TOTAL_MEM_SIZE
+ * represents the total size of this area */
+#define MSG_ARRAY_SIZE 8
+#define MSGOUT_OFFSET (L1_CACHE_ALIGN(sizeof(SCRIPT)))
+ __u8 *msgout;
+#define MSGIN_OFFSET (MSGOUT_OFFSET + L1_CACHE_ALIGN(MSG_ARRAY_SIZE))
+ __u8 *msgin;
+#define STATUS_OFFSET (MSGIN_OFFSET + L1_CACHE_ALIGN(MSG_ARRAY_SIZE))
+ __u8 *status;
+#define SLOTS_OFFSET (STATUS_OFFSET + L1_CACHE_ALIGN(MSG_ARRAY_SIZE))
+ struct NCR_700_command_slot *slots;
+#define TOTAL_MEM_SIZE (SLOTS_OFFSET + L1_CACHE_ALIGN(sizeof(struct NCR_700_command_slot) * NCR_700_COMMAND_SLOTS_PER_HOST))
+ int saved_slot_position;
+ int command_slot_count; /* protected by state lock */
+ __u8 tag_negotiated;
+ __u8 rev;
+ __u8 reselection_id;
+ __u8 min_period;
+
+ /* Free list, singly linked by ITL_forw elements */
+ struct NCR_700_command_slot *free_list;
+ /* Completion for waited for ops, like reset, abort or
+ * device reset.
+ *
+ * NOTE: relies on single threading in the error handler to
+ * have only one outstanding at once */
+ struct completion *eh_complete;
+};
+
+/*
+ * 53C700 Register Interface - the offset from the Selected base
+ * I/O address */
+#ifdef CONFIG_53C700_LE_ON_BE
+#define bE (hostdata->force_le_on_be ? 0 : 3)
+#define bSWAP (hostdata->force_le_on_be)
+#elif defined(__BIG_ENDIAN)
+#define bE 3
+#define bSWAP 0
+#elif defined(__LITTLE_ENDIAN)
+#define bE 0
+#define bSWAP 0
+#else
+#error "__BIG_ENDIAN or __LITTLE_ENDIAN must be defined, did you include byteorder.h?"
+#endif
+#define bS_to_cpu(x) (bSWAP ? le32_to_cpu(x) : (x))
+#define bS_to_host(x) (bSWAP ? cpu_to_le32(x) : (x))
+
+/* NOTE: These registers are in the LE register space only, the required byte
+ * swapping is done by the NCR_700_{read|write}[b] functions */
+#define SCNTL0_REG 0x00
+#define FULL_ARBITRATION 0xc0
+#define PARITY 0x08
+#define ENABLE_PARITY 0x04
+#define AUTO_ATN 0x02
+#define SCNTL1_REG 0x01
+#define SLOW_BUS 0x80
+#define ENABLE_SELECT 0x20
+#define ASSERT_RST 0x08
+#define ASSERT_EVEN_PARITY 0x04
+#define SDID_REG 0x02
+#define SIEN_REG 0x03
+#define PHASE_MM_INT 0x80
+#define FUNC_COMP_INT 0x40
+#define SEL_TIMEOUT_INT 0x20
+#define SELECT_INT 0x10
+#define GROSS_ERR_INT 0x08
+#define UX_DISC_INT 0x04
+#define RST_INT 0x02
+#define PAR_ERR_INT 0x01
+#define SCID_REG 0x04
+#define SXFER_REG 0x05
+#define ASYNC_OPERATION 0x00
+#define SODL_REG 0x06
+#define SOCL_REG 0x07
+#define SFBR_REG 0x08
+#define SIDL_REG 0x09
+#define SBDL_REG 0x0A
+#define SBCL_REG 0x0B
+/* read bits */
+#define SBCL_IO 0x01
+/*write bits */
+#define SYNC_DIV_AS_ASYNC 0x00
+#define SYNC_DIV_1_0 0x01
+#define SYNC_DIV_1_5 0x02
+#define SYNC_DIV_2_0 0x03
+#define DSTAT_REG 0x0C
+#define ILGL_INST_DETECTED 0x01
+#define WATCH_DOG_INTERRUPT 0x02
+#define SCRIPT_INT_RECEIVED 0x04
+#define ABORTED 0x10
+#define SSTAT0_REG 0x0D
+#define PARITY_ERROR 0x01
+#define SCSI_RESET_DETECTED 0x02
+#define UNEXPECTED_DISCONNECT 0x04
+#define SCSI_GROSS_ERROR 0x08
+#define SELECTED 0x10
+#define SELECTION_TIMEOUT 0x20
+#define FUNCTION_COMPLETE 0x40
+#define PHASE_MISMATCH 0x80
+#define SSTAT1_REG 0x0E
+#define SIDL_REG_FULL 0x80
+#define SODR_REG_FULL 0x40
+#define SODL_REG_FULL 0x20
+#define SSTAT2_REG 0x0F
+#define CTEST0_REG 0x14
+#define BTB_TIMER_DISABLE 0x40
+#define CTEST1_REG 0x15
+#define CTEST2_REG 0x16
+#define CTEST3_REG 0x17
+#define CTEST4_REG 0x18
+#define DISABLE_FIFO 0x00
+#define SLBE 0x10
+#define SFWR 0x08
+#define BYTE_LANE0 0x04
+#define BYTE_LANE1 0x05
+#define BYTE_LANE2 0x06
+#define BYTE_LANE3 0x07
+#define SCSI_ZMODE 0x20
+#define ZMODE 0x40
+#define CTEST5_REG 0x19
+#define MASTER_CONTROL 0x10
+#define DMA_DIRECTION 0x08
+#define CTEST7_REG 0x1B
+#define BURST_DISABLE 0x80 /* 710 only */
+#define SEL_TIMEOUT_DISABLE 0x10 /* 710 only */
+#define DFP 0x08
+#define EVP 0x04
+#define DIFF 0x01
+#define CTEST6_REG 0x1A
+#define TEMP_REG 0x1C
+#define DFIFO_REG 0x20
+#define FLUSH_DMA_FIFO 0x80
+#define CLR_FIFO 0x40
+#define ISTAT_REG 0x21
+#define ABORT_OPERATION 0x80
+#define SOFTWARE_RESET_710 0x40
+#define DMA_INT_PENDING 0x01
+#define SCSI_INT_PENDING 0x02
+#define CONNECTED 0x08
+#define CTEST8_REG 0x22
+#define LAST_DIS_ENBL 0x01
+#define SHORTEN_FILTERING 0x04
+#define ENABLE_ACTIVE_NEGATION 0x10
+#define GENERATE_RECEIVE_PARITY 0x20
+#define CLR_FIFO_710 0x04
+#define FLUSH_DMA_FIFO_710 0x08
+#define CTEST9_REG 0x23
+#define DBC_REG 0x24
+#define DCMD_REG 0x27
+#define DNAD_REG 0x28
+#define DIEN_REG 0x39
+#define BUS_FAULT 0x20
+#define ABORT_INT 0x10
+#define INT_INST_INT 0x04
+#define WD_INT 0x02
+#define ILGL_INST_INT 0x01
+#define DCNTL_REG 0x3B
+#define SOFTWARE_RESET 0x01
+#define COMPAT_700_MODE 0x01
+#define SCRPTS_16BITS 0x20
+#define ASYNC_DIV_2_0 0x00
+#define ASYNC_DIV_1_5 0x40
+#define ASYNC_DIV_1_0 0x80
+#define ASYNC_DIV_3_0 0xc0
+#define DMODE_710_REG 0x38
+#define DMODE_700_REG 0x34
+#define BURST_LENGTH_1 0x00
+#define BURST_LENGTH_2 0x40
+#define BURST_LENGTH_4 0x80
+#define BURST_LENGTH_8 0xC0
+#define DMODE_FC1 0x10
+#define DMODE_FC2 0x20
+#define BW16 32
+#define MODE_286 16
+#define IO_XFER 8
+#define FIXED_ADDR 4
+
+#define DSP_REG 0x2C
+#define DSPS_REG 0x30
+
+/* Parameters to begin SDTR negotiations. Empirically, I find that
+ * the 53c700-66 cannot handle an offset >8, so don't change this */
+#define NCR_700_MAX_OFFSET 8
+/* Was hoping the max offset would be greater for the 710, but
+ * empirically it seems to be 8 also */
+#define NCR_710_MAX_OFFSET 8
+#define NCR_700_MIN_XFERP 1
+#define NCR_710_MIN_XFERP 0
+#define NCR_700_MIN_PERIOD 25 /* for SDTR message, 100ns */
+
+#define script_patch_32(script, symbol, value) \
+{ \
+ int i; \
+ for(i=0; i< (sizeof(A_##symbol##_used) / sizeof(__u32)); i++) { \
+ __u32 val = bS_to_cpu((script)[A_##symbol##_used[i]]) + value; \
+ (script)[A_##symbol##_used[i]] = bS_to_host(val); \
+ dma_cache_sync(&(script)[A_##symbol##_used[i]], 4, DMA_TO_DEVICE); \
+ DEBUG((" script, patching %s at %d to 0x%lx\n", \
+ #symbol, A_##symbol##_used[i], (value))); \
+ } \
+}
+
+#define script_patch_32_abs(script, symbol, value) \
+{ \
+ int i; \
+ for(i=0; i< (sizeof(A_##symbol##_used) / sizeof(__u32)); i++) { \
+ (script)[A_##symbol##_used[i]] = bS_to_host(value); \
+ dma_cache_sync(&(script)[A_##symbol##_used[i]], 4, DMA_TO_DEVICE); \
+ DEBUG((" script, patching %s at %d to 0x%lx\n", \
+ #symbol, A_##symbol##_used[i], (value))); \
+ } \
+}
+
+/* Used for patching the SCSI ID in the SELECT instruction */
+#define script_patch_ID(script, symbol, value) \
+{ \
+ int i; \
+ for(i=0; i< (sizeof(A_##symbol##_used) / sizeof(__u32)); i++) { \
+ __u32 val = bS_to_cpu((script)[A_##symbol##_used[i]]); \
+ val &= 0xff00ffff; \
+ val |= ((value) & 0xff) << 16; \
+ (script)[A_##symbol##_used[i]] = bS_to_host(val); \
+ dma_cache_sync(&(script)[A_##symbol##_used[i]], 4, DMA_TO_DEVICE); \
+ DEBUG((" script, patching ID field %s at %d to 0x%x\n", \
+ #symbol, A_##symbol##_used[i], val)); \
+ } \
+}
+
+#define script_patch_16(script, symbol, value) \
+{ \
+ int i; \
+ for(i=0; i< (sizeof(A_##symbol##_used) / sizeof(__u32)); i++) { \
+ __u32 val = bS_to_cpu((script)[A_##symbol##_used[i]]); \
+ val &= 0xffff0000; \
+ val |= ((value) & 0xffff); \
+ (script)[A_##symbol##_used[i]] = bS_to_host(val); \
+ dma_cache_sync(&(script)[A_##symbol##_used[i]], 4, DMA_TO_DEVICE); \
+ DEBUG((" script, patching short field %s at %d to 0x%x\n", \
+ #symbol, A_##symbol##_used[i], val)); \
+ } \
+}
+
+
+static inline __u8
+NCR_700_mem_readb(struct Scsi_Host *host, __u32 reg)
+{
+ const struct NCR_700_Host_Parameters *hostdata __attribute__((unused))
+ = (struct NCR_700_Host_Parameters *)host->hostdata[0];
+
+ return readb(host->base + (reg^bE));
+}
+
+static inline __u32
+NCR_700_mem_readl(struct Scsi_Host *host, __u32 reg)
+{
+ __u32 value = __raw_readl(host->base + reg);
+ const struct NCR_700_Host_Parameters *hostdata __attribute__((unused))
+ = (struct NCR_700_Host_Parameters *)host->hostdata[0];
+#if 1
+ /* sanity check the register */
+ if((reg & 0x3) != 0)
+ BUG();
+#endif
+
+ return bS_to_cpu(value);
+}
+
+static inline void
+NCR_700_mem_writeb(__u8 value, struct Scsi_Host *host, __u32 reg)
+{
+ const struct NCR_700_Host_Parameters *hostdata __attribute__((unused))
+ = (struct NCR_700_Host_Parameters *)host->hostdata[0];
+
+ writeb(value, host->base + (reg^bE));
+}
+
+static inline void
+NCR_700_mem_writel(__u32 value, struct Scsi_Host *host, __u32 reg)
+{
+ const struct NCR_700_Host_Parameters *hostdata __attribute__((unused))
+ = (struct NCR_700_Host_Parameters *)host->hostdata[0];
+
+#if 1
+ /* sanity check the register */
+ if((reg & 0x3) != 0)
+ BUG();
+#endif
+
+ __raw_writel(bS_to_host(value), host->base + reg);
+}
+
+static inline __u8
+NCR_700_io_readb(struct Scsi_Host *host, __u32 reg)
+{
+ const struct NCR_700_Host_Parameters *hostdata __attribute__((unused))
+ = (struct NCR_700_Host_Parameters *)host->hostdata[0];
+
+ return inb(host->base + (reg^bE));
+}
+
+static inline __u32
+NCR_700_io_readl(struct Scsi_Host *host, __u32 reg)
+{
+ __u32 value = inl(host->base + reg);
+ const struct NCR_700_Host_Parameters *hostdata __attribute__((unused))
+ = (struct NCR_700_Host_Parameters *)host->hostdata[0];
+
+#if 1
+ /* sanity check the register */
+ if((reg & 0x3) != 0)
+ BUG();
+#endif
+
+ return bS_to_cpu(value);
+}
+
+static inline void
+NCR_700_io_writeb(__u8 value, struct Scsi_Host *host, __u32 reg)
+{
+ const struct NCR_700_Host_Parameters *hostdata __attribute__((unused))
+ = (struct NCR_700_Host_Parameters *)host->hostdata[0];
+
+ outb(value, host->base + (reg^bE));
+}
+
+static inline void
+NCR_700_io_writel(__u32 value, struct Scsi_Host *host, __u32 reg)
+{
+ const struct NCR_700_Host_Parameters *hostdata __attribute__((unused))
+ = (struct NCR_700_Host_Parameters *)host->hostdata[0];
+
+#if 1
+ /* sanity check the register */
+ if((reg & 0x3) != 0)
+ BUG();
+#endif
+
+ outl(bS_to_host(value), host->base + reg);
+}
+
+#ifdef CONFIG_53C700_BOTH_MAPPED
+
+static inline __u8
+NCR_700_readb(struct Scsi_Host *host, __u32 reg)
+{
+ __u8 val;
+
+ const struct NCR_700_Host_Parameters *hostdata __attribute__((unused))
+ = (struct NCR_700_Host_Parameters *)host->hostdata[0];
+
+ if(hostdata->mem_mapped)
+ val = NCR_700_mem_readb(host, reg);
+ else
+ val = NCR_700_io_readb(host, reg);
+
+ return val;
+}
+
+static inline __u32
+NCR_700_readl(struct Scsi_Host *host, __u32 reg)
+{
+ __u32 val;
+
+ const struct NCR_700_Host_Parameters *hostdata __attribute__((unused))
+ = (struct NCR_700_Host_Parameters *)host->hostdata[0];
+
+ if(hostdata->mem_mapped)
+ val = NCR_700_mem_readl(host, reg);
+ else
+ val = NCR_700_io_readl(host, reg);
+
+ return val;
+}
+
+static inline void
+NCR_700_writeb(__u8 value, struct Scsi_Host *host, __u32 reg)
+{
+ const struct NCR_700_Host_Parameters *hostdata __attribute__((unused))
+ = (struct NCR_700_Host_Parameters *)host->hostdata[0];
+
+ if(hostdata->mem_mapped)
+ NCR_700_mem_writeb(value, host, reg);
+ else
+ NCR_700_io_writeb(value, host, reg);
+}
+
+static inline void
+NCR_700_writel(__u32 value, struct Scsi_Host *host, __u32 reg)
+{
+ const struct NCR_700_Host_Parameters *hostdata __attribute__((unused))
+ = (struct NCR_700_Host_Parameters *)host->hostdata[0];
+
+ if(hostdata->mem_mapped)
+ NCR_700_mem_writel(value, host, reg);
+ else
+ NCR_700_io_writel(value, host, reg);
+}
+
+static inline void
+NCR_700_set_mem_mapped(struct NCR_700_Host_Parameters *hostdata)
+{
+ hostdata->mem_mapped = 1;
+}
+
+static inline void
+NCR_700_set_io_mapped(struct NCR_700_Host_Parameters *hostdata)
+{
+ hostdata->mem_mapped = 0;
+}
+
+
+#elif defined(CONFIG_53C700_IO_MAPPED)
+
+#define NCR_700_readb NCR_700_io_readb
+#define NCR_700_readl NCR_700_io_readl
+#define NCR_700_writeb NCR_700_io_writeb
+#define NCR_700_writel NCR_700_io_writel
+
+#define NCR_700_set_io_mapped(x)
+#define NCR_700_set_mem_mapped(x) error I/O mapped only
+
+#elif defined(CONFIG_53C700_MEM_MAPPED)
+
+#define NCR_700_readb NCR_700_mem_readb
+#define NCR_700_readl NCR_700_mem_readl
+#define NCR_700_writeb NCR_700_mem_writeb
+#define NCR_700_writel NCR_700_mem_writel
+
+#define NCR_700_set_io_mapped(x) error MEM mapped only
+#define NCR_700_set_mem_mapped(x)
+
+#else
+#error neither CONFIG_53C700_MEM_MAPPED nor CONFIG_53C700_IO_MAPPED is set
+#endif
+
+#endif