diff options
Diffstat (limited to 'drivers/scsi/lpfc/lpfc_mbox.c')
| -rw-r--r-- | drivers/scsi/lpfc/lpfc_mbox.c | 75 |
1 files changed, 38 insertions, 37 deletions
diff --git a/drivers/scsi/lpfc/lpfc_mbox.c b/drivers/scsi/lpfc/lpfc_mbox.c index 7413bfdf89a..ca358355ec9 100644 --- a/drivers/scsi/lpfc/lpfc_mbox.c +++ b/drivers/scsi/lpfc/lpfc_mbox.c @@ -671,7 +671,7 @@ lpfc_config_pcb_setup(struct lpfc_hba * phba) { struct lpfc_sli *psli = &phba->sli; struct lpfc_sli_ring *pring; - PCB_t *pcbp = &phba->slim2p->pcb; + PCB_t *pcbp = phba->pcb; dma_addr_t pdma_addr; uint32_t offset; uint32_t iocbCnt = 0; @@ -700,23 +700,23 @@ lpfc_config_pcb_setup(struct lpfc_hba * phba) continue; } /* Command ring setup for ring */ - pring->cmdringaddr = (void *) &phba->slim2p->IOCBs[iocbCnt]; + pring->cmdringaddr = (void *)&phba->IOCBs[iocbCnt]; pcbp->rdsc[i].cmdEntries = pring->numCiocb; - offset = (uint8_t *) &phba->slim2p->IOCBs[iocbCnt] - - (uint8_t *) phba->slim2p; - pdma_addr = phba->slim2p_mapping + offset; + offset = (uint8_t *) &phba->IOCBs[iocbCnt] - + (uint8_t *) phba->slim2p.virt; + pdma_addr = phba->slim2p.phys + offset; pcbp->rdsc[i].cmdAddrHigh = putPaddrHigh(pdma_addr); pcbp->rdsc[i].cmdAddrLow = putPaddrLow(pdma_addr); iocbCnt += pring->numCiocb; /* Response ring setup for ring */ - pring->rspringaddr = (void *) &phba->slim2p->IOCBs[iocbCnt]; + pring->rspringaddr = (void *) &phba->IOCBs[iocbCnt]; pcbp->rdsc[i].rspEntries = pring->numRiocb; - offset = (uint8_t *)&phba->slim2p->IOCBs[iocbCnt] - - (uint8_t *)phba->slim2p; - pdma_addr = phba->slim2p_mapping + offset; + offset = (uint8_t *)&phba->IOCBs[iocbCnt] - + (uint8_t *)phba->slim2p.virt; + pdma_addr = phba->slim2p.phys + offset; pcbp->rdsc[i].rspAddrHigh = putPaddrHigh(pdma_addr); pcbp->rdsc[i].rspAddrLow = putPaddrLow(pdma_addr); iocbCnt += pring->numRiocb; @@ -977,8 +977,8 @@ lpfc_config_port(struct lpfc_hba *phba, LPFC_MBOXQ_t *pmb) mb->un.varCfgPort.pcbLen = sizeof(PCB_t); - offset = (uint8_t *)&phba->slim2p->pcb - (uint8_t *)phba->slim2p; - pdma_addr = phba->slim2p_mapping + offset; + offset = (uint8_t *)phba->pcb - (uint8_t *)phba->slim2p.virt; + pdma_addr = phba->slim2p.phys + offset; mb->un.varCfgPort.pcbLow = putPaddrLow(pdma_addr); mb->un.varCfgPort.pcbHigh = putPaddrHigh(pdma_addr); @@ -986,12 +986,13 @@ lpfc_config_port(struct lpfc_hba *phba, LPFC_MBOXQ_t *pmb) if (phba->sli_rev == 3 && phba->vpd.sli3Feat.cerbm) { mb->un.varCfgPort.cerbm = 1; /* Request HBQs */ + mb->un.varCfgPort.ccrp = 1; /* Command Ring Polling */ + mb->un.varCfgPort.cinb = 1; /* Interrupt Notification Block */ mb->un.varCfgPort.max_hbq = lpfc_sli_hbq_count(); if (phba->max_vpi && phba->cfg_enable_npiv && phba->vpd.sli3Feat.cmv) { mb->un.varCfgPort.max_vpi = phba->max_vpi; mb->un.varCfgPort.cmv = 1; - phba->sli3_options |= LPFC_SLI3_NPIV_ENABLED; } else mb->un.varCfgPort.max_vpi = phba->max_vpi = 0; } else @@ -999,16 +1000,15 @@ lpfc_config_port(struct lpfc_hba *phba, LPFC_MBOXQ_t *pmb) mb->un.varCfgPort.sli_mode = phba->sli_rev; /* Now setup pcb */ - phba->slim2p->pcb.type = TYPE_NATIVE_SLI2; - phba->slim2p->pcb.feature = FEATURE_INITIAL_SLI2; + phba->pcb->type = TYPE_NATIVE_SLI2; + phba->pcb->feature = FEATURE_INITIAL_SLI2; /* Setup Mailbox pointers */ - phba->slim2p->pcb.mailBoxSize = offsetof(MAILBOX_t, us) + - sizeof(struct sli2_desc); - offset = (uint8_t *)&phba->slim2p->mbx - (uint8_t *)phba->slim2p; - pdma_addr = phba->slim2p_mapping + offset; - phba->slim2p->pcb.mbAddrHigh = putPaddrHigh(pdma_addr); - phba->slim2p->pcb.mbAddrLow = putPaddrLow(pdma_addr); + phba->pcb->mailBoxSize = sizeof(MAILBOX_t); + offset = (uint8_t *)phba->mbox - (uint8_t *)phba->slim2p.virt; + pdma_addr = phba->slim2p.phys + offset; + phba->pcb->mbAddrHigh = putPaddrHigh(pdma_addr); + phba->pcb->mbAddrLow = putPaddrLow(pdma_addr); /* * Setup Host Group ring pointer. @@ -1069,13 +1069,13 @@ lpfc_config_port(struct lpfc_hba *phba, LPFC_MBOXQ_t *pmb) } /* mask off BAR0's flag bits 0 - 3 */ - phba->slim2p->pcb.hgpAddrLow = (bar_low & PCI_BASE_ADDRESS_MEM_MASK) + - (void __iomem *) phba->host_gp - + phba->pcb->hgpAddrLow = (bar_low & PCI_BASE_ADDRESS_MEM_MASK) + + (void __iomem *)phba->host_gp - (void __iomem *)phba->MBslimaddr; if (bar_low & PCI_BASE_ADDRESS_MEM_TYPE_64) - phba->slim2p->pcb.hgpAddrHigh = bar_high; + phba->pcb->hgpAddrHigh = bar_high; else - phba->slim2p->pcb.hgpAddrHigh = 0; + phba->pcb->hgpAddrHigh = 0; /* write HGP data to SLIM at the required longword offset */ memset(&hgp, 0, sizeof(struct lpfc_hgp)); @@ -1085,17 +1085,19 @@ lpfc_config_port(struct lpfc_hba *phba, LPFC_MBOXQ_t *pmb) } /* Setup Port Group ring pointer */ - if (phba->sli_rev == 3) - pgp_offset = (uint8_t *)&phba->slim2p->mbx.us.s3_pgp.port - - (uint8_t *)phba->slim2p; - else - pgp_offset = (uint8_t *)&phba->slim2p->mbx.us.s2.port - - (uint8_t *)phba->slim2p; - - pdma_addr = phba->slim2p_mapping + pgp_offset; - phba->slim2p->pcb.pgpAddrHigh = putPaddrHigh(pdma_addr); - phba->slim2p->pcb.pgpAddrLow = putPaddrLow(pdma_addr); - phba->hbq_get = &phba->slim2p->mbx.us.s3_pgp.hbq_get[0]; + if (phba->sli3_options & LPFC_SLI3_INB_ENABLED) { + pgp_offset = offsetof(struct lpfc_sli2_slim, + mbx.us.s3_inb_pgp.port); + phba->hbq_get = phba->mbox->us.s3_inb_pgp.hbq_get; + } else if (phba->sli_rev == 3) { + pgp_offset = offsetof(struct lpfc_sli2_slim, + mbx.us.s3_pgp.port); + phba->hbq_get = phba->mbox->us.s3_pgp.hbq_get; + } else + pgp_offset = offsetof(struct lpfc_sli2_slim, mbx.us.s2.port); + pdma_addr = phba->slim2p.phys + pgp_offset; + phba->pcb->pgpAddrHigh = putPaddrHigh(pdma_addr); + phba->pcb->pgpAddrLow = putPaddrLow(pdma_addr); /* Use callback routine to setp rings in the pcb */ lpfc_config_pcb_setup(phba); @@ -1110,8 +1112,7 @@ lpfc_config_port(struct lpfc_hba *phba, LPFC_MBOXQ_t *pmb) } /* Swap PCB if needed */ - lpfc_sli_pcimem_bcopy(&phba->slim2p->pcb, &phba->slim2p->pcb, - sizeof(PCB_t)); + lpfc_sli_pcimem_bcopy(phba->pcb, phba->pcb, sizeof(PCB_t)); } /** |