aboutsummaryrefslogtreecommitdiff
path: root/drivers/scsi/megaraid/megaraid_sas.c
diff options
context:
space:
mode:
Diffstat (limited to 'drivers/scsi/megaraid/megaraid_sas.c')
-rw-r--r--drivers/scsi/megaraid/megaraid_sas.c291
1 files changed, 141 insertions, 150 deletions
diff --git a/drivers/scsi/megaraid/megaraid_sas.c b/drivers/scsi/megaraid/megaraid_sas.c
index 511ed52a580..a487f414960 100644
--- a/drivers/scsi/megaraid/megaraid_sas.c
+++ b/drivers/scsi/megaraid/megaraid_sas.c
@@ -10,7 +10,7 @@
* 2 of the License, or (at your option) any later version.
*
* FILE : megaraid_sas.c
- * Version : v00.00.02.00-rc4
+ * Version : v00.00.02.02
*
* Authors:
* Sreenivas Bagalkote <Sreenivas.Bagalkote@lsil.com>
@@ -55,13 +55,13 @@ static struct pci_device_id megasas_pci_table[] = {
{
PCI_VENDOR_ID_LSI_LOGIC,
- PCI_DEVICE_ID_LSI_SAS1064R,
+ PCI_DEVICE_ID_LSI_SAS1064R, // xscale IOP
PCI_ANY_ID,
PCI_ANY_ID,
},
{
PCI_VENDOR_ID_DELL,
- PCI_DEVICE_ID_DELL_PERC5,
+ PCI_DEVICE_ID_DELL_PERC5, // xscale IOP
PCI_ANY_ID,
PCI_ANY_ID,
},
@@ -119,12 +119,18 @@ megasas_return_cmd(struct megasas_instance *instance, struct megasas_cmd *cmd)
spin_unlock_irqrestore(&instance->cmd_pool_lock, flags);
}
+
+/**
+* The following functions are defined for xscale
+* (deviceid : 1064R, PERC5) controllers
+*/
+
/**
- * megasas_enable_intr - Enables interrupts
+ * megasas_enable_intr_xscale - Enables interrupts
* @regs: MFI register set
*/
static inline void
-megasas_enable_intr(struct megasas_register_set __iomem * regs)
+megasas_enable_intr_xscale(struct megasas_register_set __iomem * regs)
{
writel(1, &(regs)->outbound_intr_mask);
@@ -133,13 +139,73 @@ megasas_enable_intr(struct megasas_register_set __iomem * regs)
}
/**
+ * megasas_read_fw_status_reg_xscale - returns the current FW status value
+ * @regs: MFI register set
+ */
+static u32
+megasas_read_fw_status_reg_xscale(struct megasas_register_set __iomem * regs)
+{
+ return readl(&(regs)->outbound_msg_0);
+}
+/**
+ * megasas_clear_interrupt_xscale - Check & clear interrupt
+ * @regs: MFI register set
+ */
+static int
+megasas_clear_intr_xscale(struct megasas_register_set __iomem * regs)
+{
+ u32 status;
+ /*
+ * Check if it is our interrupt
+ */
+ status = readl(&regs->outbound_intr_status);
+
+ if (!(status & MFI_OB_INTR_STATUS_MASK)) {
+ return 1;
+ }
+
+ /*
+ * Clear the interrupt by writing back the same value
+ */
+ writel(status, &regs->outbound_intr_status);
+
+ return 0;
+}
+
+/**
+ * megasas_fire_cmd_xscale - Sends command to the FW
+ * @frame_phys_addr : Physical address of cmd
+ * @frame_count : Number of frames for the command
+ * @regs : MFI register set
+ */
+static inline void
+megasas_fire_cmd_xscale(dma_addr_t frame_phys_addr,u32 frame_count, struct megasas_register_set __iomem *regs)
+{
+ writel((frame_phys_addr >> 3)|(frame_count),
+ &(regs)->inbound_queue_port);
+}
+
+static struct megasas_instance_template megasas_instance_template_xscale = {
+
+ .fire_cmd = megasas_fire_cmd_xscale,
+ .enable_intr = megasas_enable_intr_xscale,
+ .clear_intr = megasas_clear_intr_xscale,
+ .read_fw_status_reg = megasas_read_fw_status_reg_xscale,
+};
+
+/**
+* This is the end of set of functions & definitions specific
+* to xscale (deviceid : 1064R, PERC5) controllers
+*/
+
+/**
* megasas_disable_intr - Disables interrupts
* @regs: MFI register set
*/
static inline void
megasas_disable_intr(struct megasas_register_set __iomem * regs)
{
- u32 mask = readl(&regs->outbound_intr_mask) & (~0x00000001);
+ u32 mask = 0x1f;
writel(mask, &regs->outbound_intr_mask);
/* Dummy readl to force pci flush */
@@ -167,8 +233,7 @@ megasas_issue_polled(struct megasas_instance *instance, struct megasas_cmd *cmd)
/*
* Issue the frame using inbound queue port
*/
- writel(cmd->frame_phys_addr >> 3,
- &instance->reg_set->inbound_queue_port);
+ instance->instancet->fire_cmd(cmd->frame_phys_addr ,0,instance->reg_set);
/*
* Wait for cmd_status to change
@@ -198,8 +263,7 @@ megasas_issue_blocked_cmd(struct megasas_instance *instance,
{
cmd->cmd_status = ENODATA;
- writel(cmd->frame_phys_addr >> 3,
- &instance->reg_set->inbound_queue_port);
+ instance->instancet->fire_cmd(cmd->frame_phys_addr ,0,instance->reg_set);
wait_event(instance->int_cmd_wait_q, (cmd->cmd_status != ENODATA));
@@ -242,8 +306,7 @@ megasas_issue_blocked_abort_cmd(struct megasas_instance *instance,
cmd->sync_cmd = 1;
cmd->cmd_status = 0xFF;
- writel(cmd->frame_phys_addr >> 3,
- &instance->reg_set->inbound_queue_port);
+ instance->instancet->fire_cmd(cmd->frame_phys_addr ,0,instance->reg_set);
/*
* Wait for this cmd to complete
@@ -558,112 +621,29 @@ megasas_build_ldio(struct megasas_instance *instance, struct scsi_cmnd *scp,
}
/**
- * megasas_build_cmd - Prepares a command packet
- * @instance: Adapter soft state
- * @scp: SCSI command
- * @frame_count: [OUT] Number of frames used to prepare this command
+ * megasas_is_ldio - Checks if the cmd is for logical drive
+ * @scmd: SCSI command
+ *
+ * Called by megasas_queue_command to find out if the command to be queued
+ * is a logical drive command
*/
-static struct megasas_cmd *megasas_build_cmd(struct megasas_instance
- *instance,
- struct scsi_cmnd *scp,
- int *frame_count)
+static inline int megasas_is_ldio(struct scsi_cmnd *cmd)
{
- u32 logical_cmd;
- struct megasas_cmd *cmd;
-
- /*
- * Find out if this is logical or physical drive command.
- */
- logical_cmd = MEGASAS_IS_LOGICAL(scp);
-
- /*
- * Logical drive command
- */
- if (logical_cmd) {
-
- if (scp->device->id >= MEGASAS_MAX_LD) {
- scp->result = DID_BAD_TARGET << 16;
- return NULL;
- }
-
- switch (scp->cmnd[0]) {
-
- case READ_10:
- case WRITE_10:
- case READ_12:
- case WRITE_12:
- case READ_6:
- case WRITE_6:
- case READ_16:
- case WRITE_16:
- /*
- * Fail for LUN > 0
- */
- if (scp->device->lun) {
- scp->result = DID_BAD_TARGET << 16;
- return NULL;
- }
-
- cmd = megasas_get_cmd(instance);
-
- if (!cmd) {
- scp->result = DID_IMM_RETRY << 16;
- return NULL;
- }
-
- *frame_count = megasas_build_ldio(instance, scp, cmd);
-
- if (!(*frame_count)) {
- megasas_return_cmd(instance, cmd);
- return NULL;
- }
-
- return cmd;
-
- default:
- /*
- * Fail for LUN > 0
- */
- if (scp->device->lun) {
- scp->result = DID_BAD_TARGET << 16;
- return NULL;
- }
-
- cmd = megasas_get_cmd(instance);
-
- if (!cmd) {
- scp->result = DID_IMM_RETRY << 16;
- return NULL;
- }
-
- *frame_count = megasas_build_dcdb(instance, scp, cmd);
-
- if (!(*frame_count)) {
- megasas_return_cmd(instance, cmd);
- return NULL;
- }
-
- return cmd;
- }
- } else {
- cmd = megasas_get_cmd(instance);
-
- if (!cmd) {
- scp->result = DID_IMM_RETRY << 16;
- return NULL;
- }
-
- *frame_count = megasas_build_dcdb(instance, scp, cmd);
-
- if (!(*frame_count)) {
- megasas_return_cmd(instance, cmd);
- return NULL;
- }
-
- return cmd;
+ if (!MEGASAS_IS_LOGICAL(cmd))
+ return 0;
+ switch (cmd->cmnd[0]) {
+ case READ_10:
+ case WRITE_10:
+ case READ_12:
+ case WRITE_12:
+ case READ_6:
+ case WRITE_6:
+ case READ_16:
+ case WRITE_16:
+ return 1;
+ default:
+ return 0;
}
-
- return NULL;
}
/**
@@ -684,13 +664,27 @@ megasas_queue_command(struct scsi_cmnd *scmd, void (*done) (struct scsi_cmnd *))
scmd->scsi_done = done;
scmd->result = 0;
- cmd = megasas_build_cmd(instance, scmd, &frame_count);
-
- if (!cmd) {
- done(scmd);
- return 0;
+ if (MEGASAS_IS_LOGICAL(scmd) &&
+ (scmd->device->id >= MEGASAS_MAX_LD || scmd->device->lun)) {
+ scmd->result = DID_BAD_TARGET << 16;
+ goto out_done;
}
+ cmd = megasas_get_cmd(instance);
+ if (!cmd)
+ return SCSI_MLQUEUE_HOST_BUSY;
+
+ /*
+ * Logical drive command
+ */
+ if (megasas_is_ldio(scmd))
+ frame_count = megasas_build_ldio(instance, scmd, cmd);
+ else
+ frame_count = megasas_build_dcdb(instance, scmd, cmd);
+
+ if (!frame_count)
+ goto out_return_cmd;
+
cmd->scmd = scmd;
scmd->SCp.ptr = (char *)cmd;
scmd->SCp.sent_command = jiffies;
@@ -702,10 +696,15 @@ megasas_queue_command(struct scsi_cmnd *scmd, void (*done) (struct scsi_cmnd *))
instance->fw_outstanding++;
spin_unlock_irqrestore(&instance->instance_lock, flags);
- writel(((cmd->frame_phys_addr >> 3) | (cmd->frame_count - 1)),
- &instance->reg_set->inbound_queue_port);
+ instance->instancet->fire_cmd(cmd->frame_phys_addr ,cmd->frame_count-1,instance->reg_set);
return 0;
+
+ out_return_cmd:
+ megasas_return_cmd(instance, cmd);
+ out_done:
+ done(scmd);
+ return 0;
}
/**
@@ -1108,7 +1107,6 @@ megasas_complete_cmd(struct megasas_instance *instance, struct megasas_cmd *cmd,
static int
megasas_deplete_reply_queue(struct megasas_instance *instance, u8 alt_status)
{
- u32 status;
u32 producer;
u32 consumer;
u32 context;
@@ -1116,17 +1114,10 @@ megasas_deplete_reply_queue(struct megasas_instance *instance, u8 alt_status)
/*
* Check if it is our interrupt
+ * Clear the interrupt
*/
- status = readl(&instance->reg_set->outbound_intr_status);
-
- if (!(status & MFI_OB_INTR_STATUS_MASK)) {
+ if(instance->instancet->clear_intr(instance->reg_set))
return IRQ_NONE;
- }
-
- /*
- * Clear the interrupt by writing back the same value
- */
- writel(status, &instance->reg_set->outbound_intr_status);
producer = *instance->producer;
consumer = *instance->consumer;
@@ -1160,7 +1151,7 @@ static irqreturn_t megasas_isr(int irq, void *devp, struct pt_regs *regs)
/**
* megasas_transition_to_ready - Move the FW to READY state
- * @reg_set: MFI register set
+ * @instance: Adapter soft state
*
* During the initialization, FW passes can potentially be in any one of
* several possible states. If the FW in operational, waiting-for-handshake
@@ -1168,14 +1159,14 @@ static irqreturn_t megasas_isr(int irq, void *devp, struct pt_regs *regs)
* has to wait for the ready state.
*/
static int
-megasas_transition_to_ready(struct megasas_register_set __iomem * reg_set)
+megasas_transition_to_ready(struct megasas_instance* instance)
{
int i;
u8 max_wait;
u32 fw_state;
u32 cur_state;
- fw_state = readl(&reg_set->outbound_msg_0) & MFI_STATE_MASK;
+ fw_state = instance->instancet->read_fw_status_reg(instance->reg_set) & MFI_STATE_MASK;
while (fw_state != MFI_STATE_READY) {
@@ -1193,7 +1184,7 @@ megasas_transition_to_ready(struct megasas_register_set __iomem * reg_set)
* Set the CLR bit in inbound doorbell
*/
writel(MFI_INIT_CLEAR_HANDSHAKE,
- &reg_set->inbound_doorbell);
+ &instance->reg_set->inbound_doorbell);
max_wait = 2;
cur_state = MFI_STATE_WAIT_HANDSHAKE;
@@ -1203,8 +1194,8 @@ megasas_transition_to_ready(struct megasas_register_set __iomem * reg_set)
/*
* Bring it to READY state; assuming max wait 2 secs
*/
- megasas_disable_intr(reg_set);
- writel(MFI_INIT_READY, &reg_set->inbound_doorbell);
+ megasas_disable_intr(instance->reg_set);
+ writel(MFI_INIT_READY, &instance->reg_set->inbound_doorbell);
max_wait = 10;
cur_state = MFI_STATE_OPERATIONAL;
@@ -1253,8 +1244,8 @@ megasas_transition_to_ready(struct megasas_register_set __iomem * reg_set)
* The cur_state should not last for more than max_wait secs
*/
for (i = 0; i < (max_wait * 1000); i++) {
- fw_state = MFI_STATE_MASK &
- readl(&reg_set->outbound_msg_0);
+ fw_state = instance->instancet->read_fw_status_reg(instance->reg_set) &
+ MFI_STATE_MASK ;
if (fw_state == cur_state) {
msleep(1);
@@ -1616,18 +1607,20 @@ static int megasas_init_mfi(struct megasas_instance *instance)
reg_set = instance->reg_set;
+ instance->instancet = &megasas_instance_template_xscale;
+
/*
* We expect the FW state to be READY
*/
- if (megasas_transition_to_ready(instance->reg_set))
+ if (megasas_transition_to_ready(instance))
goto fail_ready_state;
/*
* Get various operational parameters from status register
*/
- instance->max_fw_cmds = readl(&reg_set->outbound_msg_0) & 0x00FFFF;
- instance->max_num_sge = (readl(&reg_set->outbound_msg_0) & 0xFF0000) >>
- 0x10;
+ instance->max_fw_cmds = instance->instancet->read_fw_status_reg(reg_set) & 0x00FFFF;
+ instance->max_num_sge = (instance->instancet->read_fw_status_reg(reg_set) & 0xFF0000) >>
+ 0x10;
/*
* Create a pool of commands
*/
@@ -1936,8 +1929,7 @@ megasas_register_aen(struct megasas_instance *instance, u32 seq_num,
/*
* Issue the aen registration frame
*/
- writel(cmd->frame_phys_addr >> 3,
- &instance->reg_set->inbound_queue_port);
+ instance->instancet->fire_cmd(cmd->frame_phys_addr ,0,instance->reg_set);
return 0;
}
@@ -2126,7 +2118,7 @@ megasas_probe_one(struct pci_dev *pdev, const struct pci_device_id *id)
goto fail_irq;
}
- megasas_enable_intr(instance->reg_set);
+ instance->instancet->enable_intr(instance->reg_set);
/*
* Store instance in PCI softstate
@@ -2681,9 +2673,8 @@ megasas_mgmt_compat_ioctl(struct file *file, unsigned int cmd,
unsigned long arg)
{
switch (cmd) {
- case MEGASAS_IOC_FIRMWARE:{
- return megasas_mgmt_compat_ioctl_fw(file, arg);
- }
+ case MEGASAS_IOC_FIRMWARE32:
+ return megasas_mgmt_compat_ioctl_fw(file, arg);
case MEGASAS_IOC_GET_AEN:
return megasas_mgmt_ioctl_aen(file, arg);
}