aboutsummaryrefslogtreecommitdiff
path: root/drivers/scsi
diff options
context:
space:
mode:
Diffstat (limited to 'drivers/scsi')
-rw-r--r--drivers/scsi/aic7xxx/aic79xx.h3
-rw-r--r--drivers/scsi/aic7xxx/aic79xx_core.c21
-rw-r--r--drivers/scsi/aic7xxx/aic79xx_osm.c17
-rw-r--r--drivers/scsi/aic7xxx/aic79xx_pci.c11
4 files changed, 49 insertions, 3 deletions
diff --git a/drivers/scsi/aic7xxx/aic79xx.h b/drivers/scsi/aic7xxx/aic79xx.h
index 2cfdbef447d..1d11f7e7756 100644
--- a/drivers/scsi/aic7xxx/aic79xx.h
+++ b/drivers/scsi/aic7xxx/aic79xx.h
@@ -37,7 +37,7 @@
* IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
* POSSIBILITY OF SUCH DAMAGES.
*
- * $Id: //depot/aic7xxx/aic7xxx/aic79xx.h#108 $
+ * $Id: //depot/aic7xxx/aic7xxx/aic79xx.h#109 $
*
* $FreeBSD$
*/
@@ -222,6 +222,7 @@ typedef enum {
typedef enum {
AHD_FENONE = 0x00000,
AHD_WIDE = 0x00001,/* Wide Channel */
+ AHD_AIC79XXB_SLOWCRC = 0x00002,/* SLOWCRC bit should be set */
AHD_MULTI_FUNC = 0x00100,/* Multi-Function/Channel Device */
AHD_TARGETMODE = 0x01000,/* Has tested target mode support */
AHD_MULTIROLE = 0x02000,/* Space for two roles at a time */
diff --git a/drivers/scsi/aic7xxx/aic79xx_core.c b/drivers/scsi/aic7xxx/aic79xx_core.c
index dfd4cc93c05..6114b3e72ca 100644
--- a/drivers/scsi/aic7xxx/aic79xx_core.c
+++ b/drivers/scsi/aic7xxx/aic79xx_core.c
@@ -3332,6 +3332,15 @@ ahd_update_neg_table(struct ahd_softc *ahd, struct ahd_devinfo *devinfo,
con_opts |= WIDEXFER;
/*
+ * Slow down our CRC interval to be
+ * compatible with packetized U320 devices
+ * that can't handle a CRC at full speed
+ */
+ if (ahd->features & AHD_AIC79XXB_SLOWCRC) {
+ con_opts |= ENSLOWCRC;
+ }
+
+ /*
* During packetized transfers, the target will
* give us the oportunity to send command packets
* without us asserting attention.
@@ -6740,6 +6749,18 @@ ahd_chip_init(struct ahd_softc *ahd)
ahd_loadseq(ahd);
ahd_set_modes(ahd, AHD_MODE_SCSI, AHD_MODE_SCSI);
+
+ if (ahd->features & AHD_AIC79XXB_SLOWCRC) {
+ u_int negodat3 = ahd_inb(ahd, NEGCONOPTS);
+
+ negodat3 |= ENSLOWCRC;
+ ahd_outb(ahd, NEGCONOPTS, negodat3);
+ negodat3 = ahd_inb(ahd, NEGCONOPTS);
+ if (!(negodat3 & ENSLOWCRC))
+ printf("aic79xx: failed to set the SLOWCRC bit\n");
+ else
+ printf("aic79xx: SLOWCRC bit set\n");
+ }
}
/*
diff --git a/drivers/scsi/aic7xxx/aic79xx_osm.c b/drivers/scsi/aic7xxx/aic79xx_osm.c
index 2567e29960b..815c06312c8 100644
--- a/drivers/scsi/aic7xxx/aic79xx_osm.c
+++ b/drivers/scsi/aic7xxx/aic79xx_osm.c
@@ -314,6 +314,21 @@ static uint32_t aic79xx_seltime;
*/
uint32_t aic79xx_periodic_otag;
+/* Some storage boxes are using an LSI chip which has a bug making it
+ * impossible to use aic79xx Rev B chip in 320 speeds. The following
+ * storage boxes have been reported to be buggy:
+ * EonStor 3U 16-Bay: U16U-G3A3
+ * EonStor 2U 12-Bay: U12U-G3A3
+ * SentinelRAID: 2500F R5 / R6
+ * SentinelRAID: 2500F R1
+ * SentinelRAID: 2500F/1500F
+ * SentinelRAID: 150F
+ *
+ * To get around this LSI bug, you can set your board to 160 mode
+ * or you can enable the SLOWCRC bit.
+ */
+uint32_t aic79xx_slowcrc;
+
/*
* Module information and settable options.
*/
@@ -343,6 +358,7 @@ MODULE_PARM_DESC(aic79xx,
" amplitude:<int> Set the signal amplitude (0-7).\n"
" seltime:<int> Selection Timeout:\n"
" (0/256ms,1/128ms,2/64ms,3/32ms)\n"
+" slowcrc Turn on the SLOWCRC bit (Rev B only)\n"
"\n"
" Sample /etc/modprobe.conf line:\n"
" Enable verbose logging\n"
@@ -1003,6 +1019,7 @@ aic79xx_setup(char *s)
{ "slewrate", NULL },
{ "precomp", NULL },
{ "amplitude", NULL },
+ { "slowcrc", &aic79xx_slowcrc },
};
end = strchr(s, '\0');
diff --git a/drivers/scsi/aic7xxx/aic79xx_pci.c b/drivers/scsi/aic7xxx/aic79xx_pci.c
index 196a6344b03..757242e522c 100644
--- a/drivers/scsi/aic7xxx/aic79xx_pci.c
+++ b/drivers/scsi/aic7xxx/aic79xx_pci.c
@@ -38,7 +38,7 @@
* IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
* POSSIBILITY OF SUCH DAMAGES.
*
- * $Id: //depot/aic7xxx/aic7xxx/aic79xx_pci.c#89 $
+ * $Id: //depot/aic7xxx/aic7xxx/aic79xx_pci.c#92 $
*/
#ifdef __linux__
@@ -950,12 +950,19 @@ ahd_aic790X_setup(struct ahd_softc *ahd)
if ((ahd->flags & AHD_HP_BOARD) == 0)
AHD_SET_SLEWRATE(ahd, AHD_SLEWRATE_DEF_REVA);
} else {
+ /* This is revision B and newer. */
+ extern uint32_t aic79xx_slowcrc;
u_int devconfig1;
ahd->features |= AHD_RTI|AHD_NEW_IOCELL_OPTS
- | AHD_NEW_DFCNTRL_OPTS|AHD_FAST_CDB_DELIVERY;
+ | AHD_NEW_DFCNTRL_OPTS|AHD_FAST_CDB_DELIVERY
+ | AHD_BUSFREEREV_BUG;
ahd->bugs |= AHD_LQOOVERRUN_BUG|AHD_EARLY_REQ_BUG;
+ /* If the user requested the the SLOWCRC bit to be set. */
+ if (aic79xx_slowcrc)
+ ahd->features |= AHD_AIC79XXB_SLOWCRC;
+
/*
* Some issues have been resolved in the 7901B.
*/