aboutsummaryrefslogtreecommitdiff
path: root/drivers/serial/sh-sci.c
diff options
context:
space:
mode:
Diffstat (limited to 'drivers/serial/sh-sci.c')
-rw-r--r--drivers/serial/sh-sci.c92
1 files changed, 50 insertions, 42 deletions
diff --git a/drivers/serial/sh-sci.c b/drivers/serial/sh-sci.c
index 3df2aaec829..f0658d2c45b 100644
--- a/drivers/serial/sh-sci.c
+++ b/drivers/serial/sh-sci.c
@@ -3,7 +3,7 @@
*
* SuperH on-chip serial module support. (SCI with no FIFO / with FIFO)
*
- * Copyright (C) 2002 - 2006 Paul Mundt
+ * Copyright (C) 2002 - 2008 Paul Mundt
* Modified to support SH7720 SCIF. Markus Brunner, Mark Jonas (Jul 2007).
*
* based off of the old drivers/char/sh-sci.c by:
@@ -46,6 +46,7 @@
#include <linux/cpufreq.h>
#include <linux/clk.h>
#include <linux/ctype.h>
+#include <linux/err.h>
#ifdef CONFIG_SUPERH
#include <asm/clock.h>
@@ -78,7 +79,7 @@ struct sci_port {
struct timer_list break_timer;
int break_flag;
-#ifdef CONFIG_SUPERH
+#ifdef CONFIG_HAVE_CLK
/* Port clock */
struct clk *clk;
#endif
@@ -831,7 +832,7 @@ static irqreturn_t sci_mpxed_interrupt(int irq, void *ptr)
return IRQ_HANDLED;
}
-#ifdef CONFIG_CPU_FREQ
+#if defined(CONFIG_CPU_FREQ) && defined(CONFIG_HAVE_CLK)
/*
* Here we define a transistion notifier so that we can update all of our
* ports' baud rate when the peripheral clock changes.
@@ -860,7 +861,7 @@ static int sci_notifier(struct notifier_block *self,
* Clean this up later..
*/
clk = clk_get(NULL, "module_clk");
- port->uartclk = clk_get_rate(clk) * 16;
+ port->uartclk = clk_get_rate(clk);
clk_put(clk);
}
@@ -873,7 +874,7 @@ static int sci_notifier(struct notifier_block *self,
}
static struct notifier_block sci_nb = { &sci_notifier, NULL, 0 };
-#endif /* CONFIG_CPU_FREQ */
+#endif /* CONFIG_CPU_FREQ && CONFIG_HAVE_CLK */
static int sci_request_irq(struct sci_port *port)
{
@@ -1008,7 +1009,7 @@ static int sci_startup(struct uart_port *port)
if (s->enable)
s->enable(port);
-#if defined(CONFIG_SUPERH) && !defined(CONFIG_SUPERH64)
+#ifdef CONFIG_HAVE_CLK
s->clk = clk_get(NULL, "module_clk");
#endif
@@ -1030,7 +1031,7 @@ static void sci_shutdown(struct uart_port *port)
if (s->disable)
s->disable(port);
-#if defined(CONFIG_SUPERH) && !defined(CONFIG_SUPERH64)
+#ifdef CONFIG_HAVE_CLK
clk_put(s->clk);
s->clk = NULL;
#endif
@@ -1041,24 +1042,11 @@ static void sci_set_termios(struct uart_port *port, struct ktermios *termios,
{
struct sci_port *s = &sci_ports[port->line];
unsigned int status, baud, smr_val;
- int t;
+ int t = -1;
baud = uart_get_baud_rate(port, termios, old, 0, port->uartclk/16);
-
- switch (baud) {
- case 0:
- t = -1;
- break;
- default:
- {
-#if defined(CONFIG_SUPERH) && !defined(CONFIG_SUPERH64)
- t = SCBRR_VALUE(baud, clk_get_rate(s->clk));
-#else
- t = SCBRR_VALUE(baud);
-#endif
- break;
- }
- }
+ if (likely(baud))
+ t = SCBRR_VALUE(baud, port->uartclk);
do {
status = sci_in(port, SCxSR);
@@ -1113,7 +1101,7 @@ static const char *sci_type(struct uart_port *port)
case PORT_IRDA: return "irda";
}
- return 0;
+ return NULL;
}
static void sci_release_port(struct uart_port *port)
@@ -1145,19 +1133,23 @@ static void sci_config_port(struct uart_port *port, int flags)
break;
}
-#if defined(CONFIG_CPU_SUBTYPE_SH5_101) || defined(CONFIG_CPU_SUBTYPE_SH5_103)
- if (port->mapbase == 0)
+ if (port->flags & UPF_IOREMAP && !port->membase) {
+#if defined(CONFIG_SUPERH64)
port->mapbase = onchip_remap(SCIF_ADDR_SH5, 1024, "SCIF");
-
- port->membase = (void __iomem *)port->mapbase;
+ port->membase = (void __iomem *)port->mapbase;
+#else
+ port->membase = ioremap_nocache(port->mapbase, 0x40);
#endif
+
+ printk(KERN_ERR "sci: can't remap port#%d\n", port->line);
+ }
}
static int sci_verify_port(struct uart_port *port, struct serial_struct *ser)
{
struct sci_port *s = &sci_ports[port->line];
- if (ser->irq != s->irqs[SCIx_TXI_IRQ] || ser->irq > NR_IRQS)
+ if (ser->irq != s->irqs[SCIx_TXI_IRQ] || ser->irq > nr_irqs)
return -EINVAL;
if (ser->baud_base < 2400)
/* No paper tape reader for Mitch.. */
@@ -1207,17 +1199,17 @@ static void __init sci_init_ports(void)
sci_ports[i].disable = h8300_sci_disable;
#endif
sci_ports[i].port.uartclk = CONFIG_CPU_CLOCK;
-#elif defined(CONFIG_SUPERH64)
- sci_ports[i].port.uartclk = current_cpu_data.module_clock * 16;
-#else
+#elif defined(CONFIG_HAVE_CLK)
/*
* XXX: We should use a proper SCI/SCIF clock
*/
{
struct clk *clk = clk_get(NULL, "module_clk");
- sci_ports[i].port.uartclk = clk_get_rate(clk) * 16;
+ sci_ports[i].port.uartclk = clk_get_rate(clk);
clk_put(clk);
}
+#else
+#error "Need a valid uartclk"
#endif
sci_ports[i].break_timer.data = (unsigned long)&sci_ports[i];
@@ -1285,7 +1277,7 @@ static int __init serial_console_setup(struct console *co, char *options)
port->type = serial_console_port->type;
-#if defined(CONFIG_SUPERH) && !defined(CONFIG_SUPERH64)
+#ifdef CONFIG_HAVE_CLK
if (!serial_console_port->clk)
serial_console_port->clk = clk_get(NULL, "module_clk");
#endif
@@ -1436,7 +1428,7 @@ static struct uart_driver sci_uart_driver = {
static int __devinit sci_probe(struct platform_device *dev)
{
struct plat_sci_port *p = dev->dev.platform_data;
- int i;
+ int i, ret = -EINVAL;
for (i = 0; p && p->flags != 0; p++, i++) {
struct sci_port *sciport = &sci_ports[i];
@@ -1453,12 +1445,22 @@ static int __devinit sci_probe(struct platform_device *dev)
sciport->port.mapbase = p->mapbase;
- /*
- * For the simple (and majority of) cases where we don't need
- * to do any remapping, just cast the cookie directly.
- */
- if (p->mapbase && !p->membase && !(p->flags & UPF_IOREMAP))
- p->membase = (void __iomem *)p->mapbase;
+ if (p->mapbase && !p->membase) {
+ if (p->flags & UPF_IOREMAP) {
+ p->membase = ioremap_nocache(p->mapbase, 0x40);
+ if (IS_ERR(p->membase)) {
+ ret = PTR_ERR(p->membase);
+ goto err_unreg;
+ }
+ } else {
+ /*
+ * For the simple (and majority of) cases
+ * where we don't need to do any remapping,
+ * just cast the cookie directly.
+ */
+ p->membase = (void __iomem *)p->mapbase;
+ }
+ }
sciport->port.membase = p->membase;
@@ -1479,7 +1481,7 @@ static int __devinit sci_probe(struct platform_device *dev)
kgdb_putchar = kgdb_sci_putchar;
#endif
-#ifdef CONFIG_CPU_FREQ
+#if defined(CONFIG_CPU_FREQ) && defined(CONFIG_HAVE_CLK)
cpufreq_register_notifier(&sci_nb, CPUFREQ_TRANSITION_NOTIFIER);
dev_info(&dev->dev, "CPU frequency notifier registered\n");
#endif
@@ -1489,6 +1491,12 @@ static int __devinit sci_probe(struct platform_device *dev)
#endif
return 0;
+
+err_unreg:
+ for (i = i - 1; i >= 0; i--)
+ uart_remove_one_port(&sci_uart_driver, &sci_ports[i].port);
+
+ return ret;
}
static int __devexit sci_remove(struct platform_device *dev)