aboutsummaryrefslogtreecommitdiff
path: root/drivers/serial
diff options
context:
space:
mode:
Diffstat (limited to 'drivers/serial')
-rw-r--r--drivers/serial/8250_pci.c20
-rw-r--r--drivers/serial/8250_pnp.c22
-rw-r--r--drivers/serial/cpm_uart/cpm_uart_cpm1.c2
-rw-r--r--drivers/serial/jsm/jsm.h2
-rw-r--r--drivers/serial/jsm/jsm_driver.c3
-rw-r--r--drivers/serial/jsm/jsm_neo.c30
-rw-r--r--drivers/serial/serial_cs.c10
7 files changed, 62 insertions, 27 deletions
diff --git a/drivers/serial/8250_pci.c b/drivers/serial/8250_pci.c
index 356f5556759..07f05e9d095 100644
--- a/drivers/serial/8250_pci.c
+++ b/drivers/serial/8250_pci.c
@@ -1029,6 +1029,8 @@ enum pci_board_num_t {
pbn_b0_2_921600,
pbn_b0_4_921600,
+ pbn_b0_2_1130000,
+
pbn_b0_4_1152000,
pbn_b0_bt_1_115200,
@@ -1163,6 +1165,14 @@ static struct pci_board pci_boards[] __devinitdata = {
.base_baud = 921600,
.uart_offset = 8,
},
+
+ [pbn_b0_2_1130000] = {
+ .flags = FL_BASE0,
+ .num_ports = 2,
+ .base_baud = 1130000,
+ .uart_offset = 8,
+ },
+
[pbn_b0_4_1152000] = {
.flags = FL_BASE0,
.num_ports = 4,
@@ -1988,6 +1998,16 @@ static struct pci_device_id serial_pci_tbl[] = {
{ PCI_VENDOR_ID_OXSEMI, PCI_DEVICE_ID_OXSEMI_16PCI954,
PCI_SUBVENDOR_ID_SIIG, PCI_SUBDEVICE_ID_SIIG_QUARTET_SERIAL, 0, 0,
pbn_b0_4_1152000 },
+
+ /*
+ * The below card is a little controversial since it is the
+ * subject of a PCI vendor/device ID clash. (See
+ * www.ussg.iu.edu/hypermail/linux/kernel/0303.1/0516.html).
+ * For now just used the hex ID 0x950a.
+ */
+ { PCI_VENDOR_ID_OXSEMI, 0x950a,
+ PCI_ANY_ID, PCI_ANY_ID, 0, 0,
+ pbn_b0_2_1130000 },
{ PCI_VENDOR_ID_OXSEMI, PCI_DEVICE_ID_OXSEMI_16PCI954,
PCI_ANY_ID, PCI_ANY_ID, 0, 0,
pbn_b0_4_115200 },
diff --git a/drivers/serial/8250_pnp.c b/drivers/serial/8250_pnp.c
index 18c58fb7389..6b321e82caf 100644
--- a/drivers/serial/8250_pnp.c
+++ b/drivers/serial/8250_pnp.c
@@ -394,7 +394,7 @@ static int __devinit serial_pnp_guess_board(struct pnp_dev *dev, int *flags)
}
static int __devinit
-serial_pnp_probe(struct pnp_dev * dev, const struct pnp_device_id *dev_id)
+serial_pnp_probe(struct pnp_dev *dev, const struct pnp_device_id *dev_id)
{
struct uart_port port;
int ret, line, flags = dev_id->driver_data;
@@ -406,15 +406,23 @@ serial_pnp_probe(struct pnp_dev * dev, const struct pnp_device_id *dev_id)
}
memset(&port, 0, sizeof(struct uart_port));
- port.irq = pnp_irq(dev,0);
- port.iobase = pnp_port_start(dev, 0);
+ port.irq = pnp_irq(dev, 0);
+ if (pnp_port_valid(dev, 0)) {
+ port.iobase = pnp_port_start(dev, 0);
+ port.iotype = UPIO_PORT;
+ } else if (pnp_mem_valid(dev, 0)) {
+ port.mapbase = pnp_mem_start(dev, 0);
+ port.iotype = UPIO_MEM;
+ port.flags = UPF_IOREMAP;
+ } else
+ return -ENODEV;
#ifdef SERIAL_DEBUG_PNP
- printk("Setup PNP port: port %x, irq %d, type %d\n",
- port.iobase, port.irq, port.iotype);
+ printk("Setup PNP port: port %x, mem 0x%lx, irq %d, type %d\n",
+ port.iobase, port.mapbase, port.irq, port.iotype);
#endif
- port.flags = UPF_SKIP_TEST | UPF_BOOT_AUTOCONF;
+ port.flags |= UPF_SKIP_TEST | UPF_BOOT_AUTOCONF;
port.uartclk = 1843200;
port.dev = &dev->dev;
@@ -426,7 +434,7 @@ serial_pnp_probe(struct pnp_dev * dev, const struct pnp_device_id *dev_id)
}
-static void __devexit serial_pnp_remove(struct pnp_dev * dev)
+static void __devexit serial_pnp_remove(struct pnp_dev *dev)
{
long line = (long)pnp_get_drvdata(dev);
if (line)
diff --git a/drivers/serial/cpm_uart/cpm_uart_cpm1.c b/drivers/serial/cpm_uart/cpm_uart_cpm1.c
index 7911912f50c..8efbd6d1d6a 100644
--- a/drivers/serial/cpm_uart/cpm_uart_cpm1.c
+++ b/drivers/serial/cpm_uart/cpm_uart_cpm1.c
@@ -185,7 +185,7 @@ int cpm_uart_allocbuf(struct uart_cpm_port *pinfo, unsigned int is_con)
memsz = L1_CACHE_ALIGN(pinfo->rx_nrfifos * pinfo->rx_fifosize) +
L1_CACHE_ALIGN(pinfo->tx_nrfifos * pinfo->tx_fifosize);
if (is_con) {
- mem_addr = (u8 *) m8xx_cpm_hostalloc(memsz);
+ mem_addr = (u8 *) cpm_dpram_addr(cpm_dpalloc(memsz, 8));
dma_addr = 0;
} else
mem_addr = dma_alloc_coherent(NULL, memsz, &dma_addr,
diff --git a/drivers/serial/jsm/jsm.h b/drivers/serial/jsm/jsm.h
index 5bf3c45521f..18753193f59 100644
--- a/drivers/serial/jsm/jsm.h
+++ b/drivers/serial/jsm/jsm.h
@@ -89,7 +89,7 @@ enum {
#define WRITEBUFLEN ((4096) + 4)
#define MYFLIPLEN N_TTY_BUF_SIZE
-#define JSM_VERSION "jsm: 1.1-1-INKERNEL"
+#define JSM_VERSION "jsm: 1.2-1-INKERNEL"
#define JSM_PARTNUM "40002438_A-INKERNEL"
struct jsm_board;
diff --git a/drivers/serial/jsm/jsm_driver.c b/drivers/serial/jsm/jsm_driver.c
index cc5d21300ed..7e56c782419 100644
--- a/drivers/serial/jsm/jsm_driver.c
+++ b/drivers/serial/jsm/jsm_driver.c
@@ -22,6 +22,7 @@
* Scott H Kilau <Scott_Kilau@digi.com>
* Wendy Xiong <wendyx@us.ltcfwd.linux.ibm.com>
*
+ *
***********************************************************************/
#include <linux/moduleparam.h>
#include <linux/pci.h>
@@ -42,7 +43,7 @@ struct uart_driver jsm_uart_driver = {
.owner = THIS_MODULE,
.driver_name = JSM_DRIVER_NAME,
.dev_name = "ttyn",
- .major = 253,
+ .major = 0,
.minor = JSM_MINOR_START,
.nr = NR_PORTS,
};
diff --git a/drivers/serial/jsm/jsm_neo.c b/drivers/serial/jsm/jsm_neo.c
index 3a11a69feb4..6f22b42d933 100644
--- a/drivers/serial/jsm/jsm_neo.c
+++ b/drivers/serial/jsm/jsm_neo.c
@@ -48,8 +48,9 @@ static inline void neo_pci_posting_flush(struct jsm_board *bd)
static void neo_set_cts_flow_control(struct jsm_channel *ch)
{
- u8 ier = readb(&ch->ch_neo_uart->ier);
- u8 efr = readb(&ch->ch_neo_uart->efr);
+ u8 ier, efr;
+ ier = readb(&ch->ch_neo_uart->ier);
+ efr = readb(&ch->ch_neo_uart->efr);
jsm_printk(PARAM, INFO, &ch->ch_bd->pci_dev, "Setting CTSFLOW\n");
@@ -78,8 +79,9 @@ static void neo_set_cts_flow_control(struct jsm_channel *ch)
static void neo_set_rts_flow_control(struct jsm_channel *ch)
{
- u8 ier = readb(&ch->ch_neo_uart->ier);
- u8 efr = readb(&ch->ch_neo_uart->efr);
+ u8 ier, efr;
+ ier = readb(&ch->ch_neo_uart->ier);
+ efr = readb(&ch->ch_neo_uart->efr);
jsm_printk(PARAM, INFO, &ch->ch_bd->pci_dev, "Setting RTSFLOW\n");
@@ -117,8 +119,9 @@ static void neo_set_rts_flow_control(struct jsm_channel *ch)
static void neo_set_ixon_flow_control(struct jsm_channel *ch)
{
- u8 ier = readb(&ch->ch_neo_uart->ier);
- u8 efr = readb(&ch->ch_neo_uart->efr);
+ u8 ier, efr;
+ ier = readb(&ch->ch_neo_uart->ier);
+ efr = readb(&ch->ch_neo_uart->efr);
jsm_printk(PARAM, INFO, &ch->ch_bd->pci_dev, "Setting IXON FLOW\n");
@@ -153,8 +156,9 @@ static void neo_set_ixon_flow_control(struct jsm_channel *ch)
static void neo_set_ixoff_flow_control(struct jsm_channel *ch)
{
- u8 ier = readb(&ch->ch_neo_uart->ier);
- u8 efr = readb(&ch->ch_neo_uart->efr);
+ u8 ier, efr;
+ ier = readb(&ch->ch_neo_uart->ier);
+ efr = readb(&ch->ch_neo_uart->efr);
jsm_printk(PARAM, INFO, &ch->ch_bd->pci_dev, "Setting IXOFF FLOW\n");
@@ -190,8 +194,9 @@ static void neo_set_ixoff_flow_control(struct jsm_channel *ch)
static void neo_set_no_input_flow_control(struct jsm_channel *ch)
{
- u8 ier = readb(&ch->ch_neo_uart->ier);
- u8 efr = readb(&ch->ch_neo_uart->efr);
+ u8 ier, efr;
+ ier = readb(&ch->ch_neo_uart->ier);
+ efr = readb(&ch->ch_neo_uart->efr);
jsm_printk(PARAM, INFO, &ch->ch_bd->pci_dev, "Unsetting Input FLOW\n");
@@ -228,8 +233,9 @@ static void neo_set_no_input_flow_control(struct jsm_channel *ch)
static void neo_set_no_output_flow_control(struct jsm_channel *ch)
{
- u8 ier = readb(&ch->ch_neo_uart->ier);
- u8 efr = readb(&ch->ch_neo_uart->efr);
+ u8 ier, efr;
+ ier = readb(&ch->ch_neo_uart->ier);
+ efr = readb(&ch->ch_neo_uart->efr);
jsm_printk(PARAM, INFO, &ch->ch_bd->pci_dev, "Unsetting Output FLOW\n");
diff --git a/drivers/serial/serial_cs.c b/drivers/serial/serial_cs.c
index de0136cc593..1ae0b381c16 100644
--- a/drivers/serial/serial_cs.c
+++ b/drivers/serial/serial_cs.c
@@ -790,19 +790,19 @@ static struct pcmcia_device_id serial_ids[] = {
PCMCIA_PFC_DEVICE_PROD_ID13(1, "Xircom", "CEM56", 0x2e3ee845, 0xa650c32a),
PCMCIA_PFC_DEVICE_PROD_ID13(1, "Xircom", "REM10", 0x2e3ee845, 0x76df1d29),
PCMCIA_PFC_DEVICE_PROD_ID13(1, "Xircom", "XEM5600", 0x2e3ee845, 0xf1403719),
- PCMCIA_PFC_DEVICE_PROD_ID12(1, "AnyCom", "Fast Ethernet ", 0x578ba6e7, 0x02d92d1e),
+ PCMCIA_PFC_DEVICE_PROD_ID12(1, "AnyCom", "Fast Ethernet + 56K COMBO", 0x578ba6e7, 0xb0ac62c4),
PCMCIA_PFC_DEVICE_PROD_ID12(1, "D-Link", "DME336T", 0x1a424a1c, 0xb23897ff),
PCMCIA_PFC_DEVICE_PROD_ID12(1, "Gateway 2000", "XJEM3336", 0xdd9989be, 0x662c394c),
PCMCIA_PFC_DEVICE_PROD_ID12(1, "Grey Cell", "GCS3000", 0x2a151fac, 0x48b932ae),
PCMCIA_PFC_DEVICE_PROD_ID12(1, "Linksys", "EtherFast 10&100 + 56K PC Card (PCMLM56)", 0x0733cc81, 0xb3765033),
PCMCIA_PFC_DEVICE_PROD_ID12(1, "LINKSYS", "PCMLM336", 0xf7cb0b07, 0x7a821b58),
PCMCIA_PFC_DEVICE_PROD_ID12(1, "MEGAHERTZ", "XJEM1144/CCEM1144", 0xf510db04, 0x52d21e1e),
- PCMCIA_PFC_DEVICE_PROD_ID12(1, "Ositech", "Trumpcard", 0x0c2f80cd, 0x0573c29f),
- PCMCIA_PFC_DEVICE_PROD_ID12(1, "Ositech", "Trumpcard", 0x0c2f80cd, 0x0573c29f),
+ PCMCIA_PFC_DEVICE_PROD_ID12(1, "Ositech", "Trumpcard:Jack of Diamonds Modem+Ethernet", 0xc2f80cd, 0x656947b9),
+ PCMCIA_PFC_DEVICE_PROD_ID12(1, "Ositech", "Trumpcard:Jack of Hearts Modem+Ethernet", 0xc2f80cd, 0xdc9ba5ed),
PCMCIA_PFC_DEVICE_PROD_ID12(1, "PCMCIAs", "ComboCard", 0xdcfe12d3, 0xcd8906cc),
PCMCIA_PFC_DEVICE_PROD_ID12(1, "PCMCIAs", "LanModem", 0xdcfe12d3, 0xc67c648f),
PCMCIA_PFC_DEVICE_PROD_ID12(1, "TDK", "GlobalNetworker 3410/3412", 0x1eae9475, 0xd9a93bed),
- PCMCIA_PFC_DEVICE_PROD_ID12(1, "Xircom", "CreditCard Ethernet", 0x2e3ee845, 0xc0e778c2),
+ PCMCIA_PFC_DEVICE_PROD_ID12(1, "Xircom", "CreditCard Ethernet+Modem II", 0x2e3ee845, 0xeca401bf),
PCMCIA_MFC_DEVICE_MANF_CARD(0, 0x0104, 0x0070),
PCMCIA_MFC_DEVICE_MANF_CARD(1, 0x0101, 0x0562),
PCMCIA_MFC_DEVICE_MANF_CARD(1, 0x0104, 0x0070),
@@ -840,7 +840,7 @@ static struct pcmcia_device_id serial_ids[] = {
PCMCIA_DEVICE_PROD_ID12("Computerboards, Inc.", "PCM-COM422", 0xd0b78f51, 0x7e2d49ed),
PCMCIA_DEVICE_PROD_ID12("Dr. Neuhaus", "FURY CARD 14K4", 0x76942813, 0x8b96ce65),
PCMCIA_DEVICE_PROD_ID12("Intelligent", "ANGIA FAX/MODEM", 0xb496e65e, 0xf31602a6),
- PCMCIA_DEVICE_PROD_ID12("Intel", "MODEM 2400", 0x816cc815, 0x23539b80),
+ PCMCIA_DEVICE_PROD_ID12("Intel", "MODEM 2400+", 0x816cc815, 0x412729fb),
PCMCIA_DEVICE_PROD_ID12("IOTech Inc ", "PCMCIA Dual RS-232 Serial Port Card", 0x3bd2d898, 0x92abc92f),
PCMCIA_DEVICE_PROD_ID12("MACRONIX", "FAX/MODEM", 0x668388b3, 0x3f9bdf2f),
PCMCIA_DEVICE_PROD_ID12("Multi-Tech", "MT1432LT", 0x5f73be51, 0x0b3e2383),
generated by cgit v1.2.3 (git 2.25.1) at 2024-06-30 08:43:29 +0000