diff options
Diffstat (limited to 'drivers/staging/iio/sysfs.h')
| -rw-r--r-- | drivers/staging/iio/sysfs.h | 114 |
1 files changed, 86 insertions, 28 deletions
diff --git a/drivers/staging/iio/sysfs.h b/drivers/staging/iio/sysfs.h index bfe4055c0ed..e501e1338e1 100644 --- a/drivers/staging/iio/sysfs.h +++ b/drivers/staging/iio/sysfs.h @@ -15,7 +15,7 @@ #include "iio.h" /** - * struct iio_event_attribute - event control attribute + * struct iio_event_attr - event control attribute * @dev_attr: underlying device attribute * @mask: mask for the event when detecting * @listel: list header to allow addition to list of event handlers @@ -54,6 +54,7 @@ __init_iio_chrdev_minor_attr(struct iio_chrdev_minor_attr *minor_attr, * struct iio_dev_attr - iio specific device attribute * @dev_attr: underlying device attribute * @address: associated register address + * @val2: secondary attribute value */ struct iio_dev_attr { struct device_attribute dev_attr; @@ -71,6 +72,8 @@ ssize_t iio_read_const_attr(struct device *dev, /** * struct iio_const_attr - constant device specific attribute * often used for things like available modes + * @string: attribute string + * @dev_attr: underlying device attribute */ struct iio_const_attr { const char *string; @@ -80,7 +83,7 @@ struct iio_const_attr { #define to_iio_const_attr(_dev_attr) \ container_of(_dev_attr, struct iio_const_attr, dev_attr) -/* Some attributes will be hard coded (device dependant) and not require an +/* Some attributes will be hard coded (device dependent) and not require an address, in these cases pass a negative */ #define IIO_ATTR(_name, _mode, _show, _store, _addr) \ { .dev_attr = __ATTR(_name, _mode, _show, _store), \ @@ -108,102 +111,130 @@ struct iio_const_attr { /* Generic attributes of onetype or another */ /** - * IIO_DEV_ATTR_REG: revision number for the device + * IIO_DEV_ATTR_REV - revision number for the device + * @_show: output method for the attribute * * Very much device dependent. **/ #define IIO_DEV_ATTR_REV(_show) \ IIO_DEVICE_ATTR(revision, S_IRUGO, _show, NULL, 0) + /** - * IIO_DEV_ATTR_NAME: chip type dependant identifier + * IIO_DEV_ATTR_NAME - chip type dependent identifier + * @_show: output method for the attribute **/ #define IIO_DEV_ATTR_NAME(_show) \ IIO_DEVICE_ATTR(name, S_IRUGO, _show, NULL, 0) /** - * IIO_DEV_ATTR_SAMP_FREQ: sets any internal clock frequency + * IIO_DEV_ATTR_SAMP_FREQ - sets any internal clock frequency + * @_mode: sysfs file mode/permissions + * @_show: output method for the attribute + * @_store: input method for the attribute **/ #define IIO_DEV_ATTR_SAMP_FREQ(_mode, _show, _store) \ IIO_DEVICE_ATTR(sampling_frequency, _mode, _show, _store, 0) /** - * IIO_DEV_ATTR_AVAIL_SAMP_FREQ: list available sampling frequencies. + * IIO_DEV_ATTR_AVAIL_SAMP_FREQ - list available sampling frequencies + * @_show: output method for the attribute * - * May be mode dependant on some devices + * May be mode dependent on some devices **/ #define IIO_DEV_ATTR_AVAIL_SAMP_FREQ(_show) \ IIO_DEVICE_ATTR(available_sampling_frequency, S_IRUGO, _show, NULL, 0) /** - * IIO_DEV_ATTR_CONST_AVAIL_SAMP_FREQ: list available sampling frequencies. + * IIO_CONST_ATTR_AVAIL_SAMP_FREQ - list available sampling frequencies + * @_string: frequency string for the attribute * * Constant version **/ #define IIO_CONST_ATTR_AVAIL_SAMP_FREQ(_string) \ IIO_CONST_ATTR(available_sampling_frequency, _string) + /** - * IIO_DEV_ATTR_SCAN_MODE: select a scan mode + * IIO_DEV_ATTR_SCAN_MODE - select a scan mode + * @_mode: sysfs file mode/permissions + * @_show: output method for the attribute + * @_store: input method for the attribute * * This is used when only certain combinations of inputs may be read in one * scan. **/ #define IIO_DEV_ATTR_SCAN_MODE(_mode, _show, _store) \ IIO_DEVICE_ATTR(scan_mode, _mode, _show, _store, 0) + /** - * IIO_DEV_ATTR_AVAIL_SCAN_MODES: list available scan modes + * IIO_DEV_ATTR_AVAIL_SCAN_MODES - list available scan modes + * @_show: output method for the attribute **/ #define IIO_DEV_ATTR_AVAIL_SCAN_MODES(_show) \ IIO_DEVICE_ATTR(available_scan_modes, S_IRUGO, _show, NULL, 0) /** - * IIO_DEV_ATTR_SCAN: result of scan of multiple channels + * IIO_DEV_ATTR_SCAN - result of scan of multiple channels + * @_show: output method for the attribute **/ #define IIO_DEV_ATTR_SCAN(_show) \ IIO_DEVICE_ATTR(scan, S_IRUGO, _show, NULL, 0); /** - * IIO_DEV_ATTR_INPUT: direct read of a single input channel + * IIO_DEV_ATTR_INPUT - direct read of a single input channel + * @_number: input channel number + * @_show: output method for the attribute **/ #define IIO_DEV_ATTR_INPUT(_number, _show) \ IIO_DEVICE_ATTR(in##_number, S_IRUGO, _show, NULL, _number) - /** - * IIO_DEV_ATTR_SW_RING_ENABLE: enable software ring buffer + * IIO_DEV_ATTR_SW_RING_ENABLE - enable software ring buffer + * @_show: output method for the attribute + * @_store: input method for the attribute * - * Success may be dependant on attachment of trigger previously + * Success may be dependent on attachment of trigger previously. **/ #define IIO_DEV_ATTR_SW_RING_ENABLE(_show, _store) \ IIO_DEVICE_ATTR(sw_ring_enable, S_IRUGO | S_IWUSR, _show, _store, 0) /** - * IIO_DEV_ATTR_HW_RING_ENABLE: enable hardware ring buffer + * IIO_DEV_ATTR_HW_RING_ENABLE - enable hardware ring buffer + * @_show: output method for the attribute + * @_store: input method for the attribute * - * This is a different attribute from the software one as one can invision + * This is a different attribute from the software one as one can envision * schemes where a combination of the two may be used. **/ #define IIO_DEV_ATTR_HW_RING_ENABLE(_show, _store) \ IIO_DEVICE_ATTR(hw_ring_enable, S_IRUGO | S_IWUSR, _show, _store, 0) /** - * IIO_DEV_ATTR_BPSE: set number of bits per scan element + * IIO_DEV_ATTR_BPSE - set number of bits per scan element + * @_mode: sysfs file mode/permissions + * @_show: output method for the attribute + * @_store: input method for the attribute **/ #define IIO_DEV_ATTR_BPSE(_mode, _show, _store) \ IIO_DEVICE_ATTR(bpse, _mode, _show, _store, 0) /** - * IIO_DEV_ATTR_BPSE_AVAILABLE: no of bits per scan element supported + * IIO_DEV_ATTR_BPSE_AVAILABLE - number of bits per scan element supported + * @_show: output method for the attribute **/ #define IIO_DEV_ATTR_BPSE_AVAILABLE(_show) \ IIO_DEVICE_ATTR(bpse_available, S_IRUGO, _show, NULL, 0) /** - * IIO_DEV_ATTR_TEMP: many sensors have auxiliary temperature sensors + * IIO_DEV_ATTR_TEMP - many sensors have auxiliary temperature sensors + * @_show: output method for the attribute **/ #define IIO_DEV_ATTR_TEMP(_show) \ IIO_DEVICE_ATTR(temp, S_IRUGO, _show, NULL, 0) + /** - * IIO_EVENT_SH: generic shared event handler + * IIO_EVENT_SH - generic shared event handler + * @_name: event name + * @_handler: handler function to be called * * This is used in cases where more than one event may result from a single * handler. Often the case that some alarm register must be read and multiple @@ -221,8 +252,14 @@ struct iio_const_attr { .prev = &iio_event_##_name.list, \ }, \ }; + /** - * IIO_EVENT_ATTR_SH: generic shared event attribute + * IIO_EVENT_ATTR_SH - generic shared event attribute + * @_name: event name + * @_ev_list: event handler list + * @_show: output method for the attribute + * @_store: input method for the attribute + * @_mask: mask used when detecting the event * * An attribute with an associated IIO_EVENT_SH **/ @@ -235,7 +272,12 @@ struct iio_const_attr { .listel = &_ev_list }; /** - * IIO_EVENT_ATTR: non shared event attribute + * IIO_EVENT_ATTR - non-shared event attribute + * @_name: event name + * @_show: output method for the attribute + * @_store: input method for the attribute + * @_mask: mask used when detecting the event + * @_handler: handler function to be called **/ #define IIO_EVENT_ATTR(_name, _show, _store, _mask, _handler) \ static struct iio_event_handler_list \ @@ -251,10 +293,14 @@ struct iio_const_attr { .listel = &iio_event_##_name }; \ /** - * IIO_EVENT_ATTR_DATA_RDY: event driven by data ready signal + * IIO_EVENT_ATTR_DATA_RDY - event driven by data ready signal + * @_show: output method for the attribute + * @_store: input method for the attribute + * @_mask: mask used when detecting the event + * @_handler: handler function to be called * * Not typically implemented in devices where full triggering support - * has been implemented + * has been implemented. **/ #define IIO_EVENT_ATTR_DATA_RDY(_show, _store, _mask, _handler) \ IIO_EVENT_ATTR(data_rdy, _show, _store, _mask, _handler) @@ -269,19 +315,31 @@ struct iio_const_attr { #define IIO_EVENT_CODE_DEVICE_SPECIFIC 1000 /** - * IIO_EVENT_ATTR_RING_50_FULL: ring buffer event to indicate 50% full + * IIO_EVENT_ATTR_RING_50_FULL - ring buffer event to indicate 50% full + * @_show: output method for the attribute + * @_store: input method for the attribute + * @_mask: mask used when detecting the event + * @_handler: handler function to be called **/ #define IIO_EVENT_ATTR_RING_50_FULL(_show, _store, _mask, _handler) \ IIO_EVENT_ATTR(ring_50_full, _show, _store, _mask, _handler) /** - * IIO_EVENT_ATTR_RING_50_FULL_SH: shared ring event to indicate 50% full + * IIO_EVENT_ATTR_RING_50_FULL_SH - shared ring event to indicate 50% full + * @_evlist: event handler list + * @_show: output method for the attribute + * @_store: input method for the attribute + * @_mask: mask used when detecting the event **/ #define IIO_EVENT_ATTR_RING_50_FULL_SH(_evlist, _show, _store, _mask) \ IIO_EVENT_ATTR_SH(ring_50_full, _evlist, _show, _store, _mask) /** - * IIO_EVENT_ATTR_RING_75_FULL_SH: shared ring event to indicate 75% full + * IIO_EVENT_ATTR_RING_75_FULL_SH - shared ring event to indicate 75% full + * @_evlist: event handler list + * @_show: output method for the attribute + * @_store: input method for the attribute + * @_mask: mask used when detecting the event **/ #define IIO_EVENT_ATTR_RING_75_FULL_SH(_evlist, _show, _store, _mask) \ IIO_EVENT_ATTR_SH(ring_75_full, _evlist, _show, _store, _mask) |