diff options
Diffstat (limited to 'drivers/staging/serqt_usb2')
-rw-r--r-- | drivers/staging/serqt_usb2/Kconfig | 9 | ||||
-rw-r--r-- | drivers/staging/serqt_usb2/Makefile | 1 | ||||
-rw-r--r-- | drivers/staging/serqt_usb2/serqt_usb2.c | 1664 |
3 files changed, 1674 insertions, 0 deletions
diff --git a/drivers/staging/serqt_usb2/Kconfig b/drivers/staging/serqt_usb2/Kconfig new file mode 100644 index 00000000000..f4fed40e23d --- /dev/null +++ b/drivers/staging/serqt_usb2/Kconfig @@ -0,0 +1,9 @@ +config USB_SERIAL_QUATECH2 + tristate "USB Quatech ESU-100 8 Port Serial Driver" + depends on USB_SERIAL + help + Say Y here if you want to use the Quatech ESU-100 8 port usb to + serial adapter. + + To compile this driver as a module, choose M here: the + module will be called serqt_usb2. diff --git a/drivers/staging/serqt_usb2/Makefile b/drivers/staging/serqt_usb2/Makefile new file mode 100644 index 00000000000..21578617f7e --- /dev/null +++ b/drivers/staging/serqt_usb2/Makefile @@ -0,0 +1 @@ +obj-$(CONFIG_USB_SERIAL_QUATECH2) += serqt_usb2.o diff --git a/drivers/staging/serqt_usb2/serqt_usb2.c b/drivers/staging/serqt_usb2/serqt_usb2.c new file mode 100644 index 00000000000..581232b719f --- /dev/null +++ b/drivers/staging/serqt_usb2/serqt_usb2.c @@ -0,0 +1,1664 @@ +/* + * This code was developed for the Quatech USB line for linux, it used + * much of the code developed by Greg Kroah-Hartman for USB serial devices + * + */ + +#include <linux/errno.h> +#include <linux/init.h> +#include <linux/slab.h> +#include <linux/tty.h> +#include <linux/tty_driver.h> +#include <linux/tty_flip.h> +#include <linux/module.h> +#include <linux/serial.h> +#include <linux/usb.h> +#include <linux/usb/serial.h> +#include <linux/uaccess.h> + +static int debug; + +/* Version Information */ +#define DRIVER_VERSION "v2.14" +#define DRIVER_AUTHOR "Tim Gobeli, Quatech, Inc" +#define DRIVER_DESC "Quatech USB to Serial Driver" + +#define USB_VENDOR_ID_QUATECH 0x061d /* Quatech VID */ +#define QUATECH_SSU100 0xC020 /* SSU100 */ +#define QUATECH_SSU200 0xC030 /* SSU200 */ +#define QUATECH_DSU100 0xC040 /* DSU100 */ +#define QUATECH_DSU200 0xC050 /* DSU200 */ +#define QUATECH_QSU100 0xC060 /* QSU100 */ +#define QUATECH_QSU200 0xC070 /* QSU200 */ +#define QUATECH_ESU100A 0xC080 /* ESU100A */ +#define QUATECH_ESU100B 0xC081 /* ESU100B */ +#define QUATECH_ESU200A 0xC0A0 /* ESU200A */ +#define QUATECH_ESU200B 0xC0A1 /* ESU200B */ +#define QUATECH_HSU100A 0xC090 /* HSU100A */ +#define QUATECH_HSU100B 0xC091 /* HSU100B */ +#define QUATECH_HSU100C 0xC092 /* HSU100C */ +#define QUATECH_HSU100D 0xC093 /* HSU100D */ +#define QUATECH_HSU200A 0xC0B0 /* HSU200A */ +#define QUATECH_HSU200B 0xC0B1 /* HSU200B */ +#define QUATECH_HSU200C 0xC0B2 /* HSU200C */ +#define QUATECH_HSU200D 0xC0B3 /* HSU200D */ +#define QUATECH_SSU100_2 0xC120 /* SSU100_2 */ +#define QUATECH_DSU100_2 0xC140 /* DSU100_2 */ +#define QUATECH_DSU400_2 0xC150 /* DSU400_2 */ +#define QUATECH_QSU100_2 0xC160 /* QSU100_2 */ +#define QUATECH_QSU400_2 0xC170 /* QSU400_2 */ +#define QUATECH_ESU400_2 0xC180 /* ESU400_2 */ +#define QUATECH_ESU100_2 0xC1A0 /* ESU100_2 */ + +#define QT_SET_GET_DEVICE 0xc2 +#define QT_OPEN_CLOSE_CHANNEL 0xca +#define QT_GET_SET_PREBUF_TRIG_LVL 0xcc +#define QT_SET_ATF 0xcd +#define QT_GET_SET_REGISTER 0xc0 +#define QT_GET_SET_UART 0xc1 +#define QT_HW_FLOW_CONTROL_MASK 0xc5 +#define QT_SW_FLOW_CONTROL_MASK 0xc6 +#define QT_SW_FLOW_CONTROL_DISABLE 0xc7 +#define QT_BREAK_CONTROL 0xc8 + +#define USBD_TRANSFER_DIRECTION_IN 0xc0 +#define USBD_TRANSFER_DIRECTION_OUT 0x40 + +#define MAX_BAUD_RATE 460800 +#define MAX_BAUD_REMAINDER 4608 + +#define DIV_LATCH_LS 0x00 +#define XMT_HOLD_REGISTER 0x00 +#define XVR_BUFFER_REGISTER 0x00 +#define DIV_LATCH_MS 0x01 +#define FIFO_CONTROL_REGISTER 0x02 +#define LINE_CONTROL_REGISTER 0x03 +#define MODEM_CONTROL_REGISTER 0x04 +#define LINE_STATUS_REGISTER 0x05 +#define MODEM_STATUS_REGISTER 0x06 + +#define SERIAL_MCR_DTR 0x01 +#define SERIAL_MCR_RTS 0x02 +#define SERIAL_MCR_LOOP 0x10 + +#define SERIAL_MSR_CTS 0x10 +#define SERIAL_MSR_CD 0x80 +#define SERIAL_MSR_RI 0x40 +#define SERIAL_MSR_DSR 0x20 +#define SERIAL_MSR_MASK 0xf0 + +#define SERIAL_8_DATA 0x03 +#define SERIAL_7_DATA 0x02 +#define SERIAL_6_DATA 0x01 +#define SERIAL_5_DATA 0x00 + +#define SERIAL_ODD_PARITY 0X08 +#define SERIAL_EVEN_PARITY 0X18 +#define SERIAL_TWO_STOPB 0x04 +#define SERIAL_ONE_STOPB 0x00 + +#define DEFAULT_DIVISOR 0x30 /* gives 9600 baud rate */ +#define DEFAULT_LCR SERIAL_8_DATA /* 8, none , 1 */ + +#define FULLPWRBIT 0x00000080 +#define NEXT_BOARD_POWER_BIT 0x00000004 + +#define SERIAL_LSR_OE 0x02 +#define SERIAL_LSR_PE 0x04 +#define SERIAL_LSR_FE 0x08 +#define SERIAL_LSR_BI 0x10 + +#define SERIAL_MSR_CTS 0x10 +#define SERIAL_MSR_CD 0x80 +#define SERIAL_MSR_RI 0x40 +#define SERIAL_MSR_DSR 0x20 +#define SERIAL_MSR_MASK 0xf0 + +#define PREFUFF_LEVEL_CONSERVATIVE 128 +#define ATC_DISABLED 0x0 + +#define RR_BITS 0x03 /* for clearing clock bits */ +#define DUPMODE_BITS 0xc0 +#define CLKS_X4 0x02 + +#define LOOPMODE_BITS 0x41 /* LOOP1 = b6, LOOP0 = b0 (PORT B) */ +#define ALL_LOOPBACK 0x01 +#define MODEM_CTRL 0x40 +#define RS232_MODE 0x00 + +static struct usb_device_id serqt_id_table[] = { + {USB_DEVICE(USB_VENDOR_ID_QUATECH, QUATECH_SSU100)}, + {USB_DEVICE(USB_VENDOR_ID_QUATECH, QUATECH_SSU200)}, + {USB_DEVICE(USB_VENDOR_ID_QUATECH, QUATECH_DSU100)}, + {USB_DEVICE(USB_VENDOR_ID_QUATECH, QUATECH_DSU200)}, + {USB_DEVICE(USB_VENDOR_ID_QUATECH, QUATECH_QSU100)}, + {USB_DEVICE(USB_VENDOR_ID_QUATECH, QUATECH_QSU200)}, + {USB_DEVICE(USB_VENDOR_ID_QUATECH, QUATECH_ESU100A)}, + {USB_DEVICE(USB_VENDOR_ID_QUATECH, QUATECH_ESU100B)}, + {USB_DEVICE(USB_VENDOR_ID_QUATECH, QUATECH_ESU200A)}, + {USB_DEVICE(USB_VENDOR_ID_QUATECH, QUATECH_ESU200B)}, + {USB_DEVICE(USB_VENDOR_ID_QUATECH, QUATECH_HSU100A)}, + {USB_DEVICE(USB_VENDOR_ID_QUATECH, QUATECH_HSU100B)}, + {USB_DEVICE(USB_VENDOR_ID_QUATECH, QUATECH_HSU100C)}, + {USB_DEVICE(USB_VENDOR_ID_QUATECH, QUATECH_HSU100D)}, + {USB_DEVICE(USB_VENDOR_ID_QUATECH, QUATECH_HSU200A)}, + {USB_DEVICE(USB_VENDOR_ID_QUATECH, QUATECH_HSU200B)}, + {USB_DEVICE(USB_VENDOR_ID_QUATECH, QUATECH_HSU200C)}, + {USB_DEVICE(USB_VENDOR_ID_QUATECH, QUATECH_HSU200D)}, + {USB_DEVICE(USB_VENDOR_ID_QUATECH, QUATECH_SSU100_2)}, + {USB_DEVICE(USB_VENDOR_ID_QUATECH, QUATECH_DSU100_2)}, + {USB_DEVICE(USB_VENDOR_ID_QUATECH, QUATECH_DSU400_2)}, + {USB_DEVICE(USB_VENDOR_ID_QUATECH, QUATECH_QSU100_2)}, + {USB_DEVICE(USB_VENDOR_ID_QUATECH, QUATECH_QSU400_2)}, + {USB_DEVICE(USB_VENDOR_ID_QUATECH, QUATECH_ESU400_2)}, + {USB_DEVICE(USB_VENDOR_ID_QUATECH, QUATECH_ESU100_2)}, + {} /* Terminating entry */ +}; + +MODULE_DEVICE_TABLE(usb, serqt_id_table); + +struct qt_get_device_data { + __u8 porta; + __u8 portb; + __u8 portc; +}; + +struct qt_open_channel_data { + __u8 line_status; + __u8 modem_status; +}; + +struct quatech_port { + int port_num; /* number of the port */ + struct urb *write_urb; /* write URB for this port */ + struct urb *read_urb; /* read URB for this port */ + struct urb *int_urb; + + __u8 shadowLCR; /* last LCR value received */ + __u8 shadowMCR; /* last MCR value received */ + __u8 shadowMSR; /* last MSR value received */ + __u8 shadowLSR; /* last LSR value received */ + char open_ports; + + /* Used for TIOCMIWAIT */ + wait_queue_head_t msr_wait; + char prev_status, diff_status; + + wait_queue_head_t wait; + + struct async_icount icount; + + struct usb_serial_port *port; /* owner of this object */ + struct qt_get_device_data DeviceData; + spinlock_t lock; + bool read_urb_busy; + int RxHolding; + int ReadBulkStopped; + char closePending; +}; + +static struct usb_driver serqt_usb_driver = { + .name = "quatech-usb-serial", + .probe = usb_serial_probe, + .disconnect = usb_serial_disconnect, + .id_table = serqt_id_table, + .no_dynamic_id = 1, +}; + +static int port_paranoia_check(struct usb_serial_port *port, + const char *function) +{ + if (!port) { + dbg("%s - port == NULL", function); + return -1; + } + if (!port->serial) { + dbg("%s - port->serial == NULL\n", function); + return -1; + } + + return 0; +} + +static int serial_paranoia_check(struct usb_serial *serial, + const char *function) +{ + if (!serial) { + dbg("%s - serial == NULL\n", function); + return -1; + } + + if (!serial->type) { + dbg("%s - serial->type == NULL!", function); + return -1; + } + + return 0; +} + +static inline struct quatech_port *qt_get_port_private(struct usb_serial_port + *port) +{ + return (struct quatech_port *)usb_get_serial_port_data(port); +} + +static inline void qt_set_port_private(struct usb_serial_port *port, + struct quatech_port *data) +{ + usb_set_serial_port_data(port, (void *)data); +} + +static struct usb_serial *get_usb_serial(struct usb_serial_port *port, + const char *function) +{ + /* if no port was specified, or it fails a paranoia check */ + if (!port || + port_paranoia_check(port, function) || + serial_paranoia_check(port->serial, function)) { + /* + * then say that we dont have a valid usb_serial thing, + * which will end up genrating -ENODEV return values + */ + return NULL; + } + + return port->serial; +} + +static void ProcessLineStatus(struct quatech_port *qt_port, + unsigned char line_status) +{ + + qt_port->shadowLSR = + line_status & (SERIAL_LSR_OE | SERIAL_LSR_PE | SERIAL_LSR_FE | + SERIAL_LSR_BI); + return; +} + +static void ProcessModemStatus(struct quatech_port *qt_port, + unsigned char modem_status) +{ + + qt_port->shadowMSR = modem_status; + wake_up_interruptible(&qt_port->wait); + return; +} + +static void ProcessRxChar(struct usb_serial_port *port, unsigned char Data) +{ + struct tty_struct *tty; + struct urb *urb = port->read_urb; + tty = tty_port_tty_get(&port->port); + + /* if we insert more than TTY_FLIPBUF_SIZE characters, we drop them. */ + + if (tty && urb->actual_length) { + tty_buffer_request_room(tty, 1); + tty_insert_flip_string(tty, &Data, 1); + /* tty_flip_buffer_push(tty); */ + } + + return; +} + +static void qt_write_bulk_callback(struct urb *urb) +{ + struct tty_struct *tty; + int status; + struct quatech_port *quatech_port; + + status = urb->status; + + if (status) { + dbg("nonzero write bulk status received:%d\n", status); + return; + } + + quatech_port = urb->context; + + dbg("%s - port %d\n", __func__, quatech_port->port_num); + + tty = tty_port_tty_get(&quatech_port->port->port); + + if (tty) + tty_wakeup(tty); + tty_kref_put(tty); +} + +static void qt_interrupt_callback(struct urb *urb) +{ + /* FIXME */ +} + +static void qt_read_bulk_callback(struct urb *urb) +{ + + struct usb_serial_port *port = urb->context; + struct usb_serial *serial = get_usb_serial(port, __func__); + struct quatech_port *qt_port = qt_get_port_private(port); + unsigned char *data; + struct tty_struct *tty; + unsigned int index; + unsigned int RxCount; + int i, result; + int flag, flag_data; + + if (urb->status) { + qt_port->ReadBulkStopped = 1; + dbg("%s - nonzero write bulk status received: %d\n", + __func__, urb->status); + return; + } + + tty = tty_port_tty_get(&port->port); + if (!tty) { + dbg("%s - bad tty pointer - exiting", __func__); + return; + } + + data = urb->transfer_buffer; + + RxCount = urb->actual_length; + + /* index = MINOR(port->tty->device) - serial->minor; */ + index = tty->index - serial->minor; + + dbg("%s - port %d\n", __func__, port->number); + dbg("%s - port->RxHolding = %d\n", __func__, qt_port->RxHolding); + + if (port_paranoia_check(port, __func__) != 0) { + dbg("%s - port_paranoia_check, exiting\n", __func__); + qt_port->ReadBulkStopped = 1; + return; + } + + if (!serial) { + dbg("%s - bad serial pointer, exiting\n", __func__); + return; + } + if (qt_port->closePending == 1) { + /* Were closing , stop reading */ + dbg("%s - (qt_port->closepending == 1\n", __func__); + qt_port->ReadBulkStopped = 1; + return; + } + + /* + * RxHolding is asserted by throttle, if we assert it, we're not + * receiving any more characters and let the box handle the flow + * control + */ + if (qt_port->RxHolding == 1) { + qt_port->ReadBulkStopped = 1; + return; + } + + if (urb->status) { + qt_port->ReadBulkStopped = 1; + + dbg("%s - nonzero read bulk status received: %d\n", + __func__, urb->status); + return; + } + + if (tty && RxCount) { + flag_data = 0; + for (i = 0; i < RxCount; ++i) { + /* Look ahead code here */ + if ((i <= (RxCount - 3)) && (data[i] == 0x1b) + && (data[i + 1] == 0x1b)) { + flag = 0; + switch (data[i + 2]) { + case 0x00: + /* line status change 4th byte must follow */ + if (i > (RxCount - 4)) { + dbg("Illegal escape seuences in received data\n"); + break; + } + ProcessLineStatus(qt_port, data[i + 3]); + i += 3; + flag = 1; + break; + + case 0x01: + /* Modem status status change 4th byte must follow */ + dbg("Modem status status. \n"); + if (i > (RxCount - 4)) { + dbg("Illegal escape sequences in received data\n"); + break; + } + ProcessModemStatus(qt_port, + data[i + 3]); + i += 3; + flag = 1; + break; + case 0xff: + dbg("No status sequence. \n"); + + ProcessRxChar(port, data[i]); + ProcessRxChar(port, data[i + 1]); + i += 2; + break; + } + if (flag == 1) + continue; + } + + if (tty && urb->actual_length) { + tty_buffer_request_room(tty, 1); + tty_insert_flip_string(tty, (data + i), 1); + } + + } + tty_flip_buffer_push(tty); + } + + /* Continue trying to always read */ + usb_fill_bulk_urb(port->read_urb, serial->dev, + usb_rcvbulkpipe(serial->dev, + port->bulk_in_endpointAddress), + port->read_urb->transfer_buffer, + port->read_urb->transfer_buffer_length, + qt_read_bulk_callback, port); + result = usb_submit_urb(port->read_urb, GFP_ATOMIC); + if (result) + dbg("%s - failed resubmitting read urb, error %d", + __func__, result); + else { + if (tty && RxCount) { + tty_flip_buffer_push(tty); + tty_schedule_flip(tty); + } + } + + schedule_work(&port->work); +} + +/* + * qt_get_device + * Issue a GET_DEVICE vendor-specific request on the default control pipe If + * successful, fills in the qt_get_device_data structure pointed to by + * device_data, otherwise return a negative error number of the problem. + */ + +static int qt_get_device(struct usb_serial *serial, + struct qt_get_device_data *device_data) +{ + int result; + unsigned char *transfer_buffer; + + transfer_buffer = + kmalloc(sizeof(struct qt_get_device_data), GFP_KERNEL); + if (!transfer_buffer) + return -ENOMEM; + + result = usb_control_msg(serial->dev, usb_rcvctrlpipe(serial->dev, 0), + QT_SET_GET_DEVICE, 0xc0, 0, 0, + transfer_buffer, + sizeof(struct qt_get_device_data), 300); + if (result > 0) + memcpy(device_data, transfer_buffer, + sizeof(struct qt_get_device_data)); + kfree(transfer_buffer); + + return result; +} + +/**************************************************************************** + * BoxSetPrebufferLevel + TELLS BOX WHEN TO ASSERT FLOW CONTROL + ****************************************************************************/ +static int BoxSetPrebufferLevel(struct usb_serial *serial) +{ + int result; + __u16 buffer_length; + + buffer_length = PREFUFF_LEVEL_CONSERVATIVE; + result = usb_control_msg(serial->dev, usb_sndctrlpipe(serial->dev, 0), + QT_GET_SET_PREBUF_TRIG_LVL, 0x40, + buffer_length, 0, NULL, 0, 300); + return result; +} + +/**************************************************************************** + * BoxSetATC + TELLS BOX WHEN TO ASSERT automatic transmitter control + ****************************************************************************/ +static int BoxSetATC(struct usb_serial *serial, __u16 n_Mode) +{ + int result; + __u16 buffer_length; + + buffer_length = PREFUFF_LEVEL_CONSERVATIVE; + + result = + usb_control_msg(serial->dev, usb_sndctrlpipe(serial->dev, 0), + QT_SET_ATF, 0x40, n_Mode, 0, NULL, 0, 300); + + return result; +} + +/** + * qt_set_device + * Issue a SET_DEVICE vendor-specific request on the default control pipe If + * successful returns the number of bytes written, otherwise it returns a + * negative error number of the problem. + */ +static int qt_set_device(struct usb_serial *serial, + struct qt_get_device_data *device_data) +{ + int result; + __u16 length; + __u16 PortSettings; + + PortSettings = ((__u16) (device_data->portb)); + PortSettings = (PortSettings << 8); + PortSettings += ((__u16) (device_data->porta)); + + length = sizeof(struct qt_get_device_data); + dbg("%s - PortSettings = 0x%x\n", __func__, PortSettings); + + result = usb_control_msg(serial->dev, usb_sndctrlpipe(serial->dev, 0), + QT_SET_GET_DEVICE, 0x40, PortSettings, + 0, NULL, 0, 300); + return result; +} + +static int qt_open_channel(struct usb_serial *serial, __u16 Uart_Number, + struct qt_open_channel_data *pDeviceData) +{ + int result; + + result = usb_control_msg(serial->dev, usb_rcvctrlpipe(serial->dev, 0), + QT_OPEN_CLOSE_CHANNEL, + USBD_TRANSFER_DIRECTION_IN, 1, Uart_Number, + pDeviceData, + sizeof(struct qt_open_channel_data), 300); + + return result; + +} + +static int qt_close_channel(struct usb_serial *serial, __u16 Uart_Number) +{ + int result; + + result = usb_control_msg(serial->dev, usb_rcvctrlpipe(serial->dev, 0), + QT_OPEN_CLOSE_CHANNEL, + USBD_TRANSFER_DIRECTION_OUT, 0, Uart_Number, + NULL, 0, 300); + + return result; + +} + +/**************************************************************************** +* BoxGetRegister +* issuse a GET_REGISTER vendor-spcific request on the default control pipe +* If successful, fills in the pValue with the register value asked for +****************************************************************************/ +static int BoxGetRegister(struct usb_serial *serial, unsigned short Uart_Number, + unsigned short Register_Num, __u8 *pValue) +{ + int result; + __u16 current_length; + + current_length = sizeof(struct qt_get_device_data); + + result = + usb_control_msg(serial->dev, usb_rcvctrlpipe(serial->dev, 0), + QT_GET_SET_REGISTER, 0xC0, Register_Num, + Uart_Number, (void *)pValue, sizeof(*pValue), 300); + + return result; +} + +/**************************************************************************** +* BoxSetRegister +* issuse a GET_REGISTER vendor-spcific request on the default control pipe +* If successful, fills in the pValue with the register value asked for +****************************************************************************/ +static int BoxSetRegister(struct usb_serial *serial, unsigned short Uart_Number, + unsigned short Register_Num, unsigned short Value) +{ + int result; + unsigned short RegAndByte; + + RegAndByte = Value; + RegAndByte = RegAndByte << 8; + RegAndByte = RegAndByte + Register_Num; + +/* + result = usb_control_msg(serial->dev, usb_sndctrlpipe(serial->dev, 0), + QT_GET_SET_REGISTER, 0xC0, Register_Num, + Uart_Number, NULL, 0, 300); +*/ + + result = + usb_control_msg(serial->dev, usb_sndctrlpipe(serial->dev, 0), + QT_GET_SET_REGISTER, 0x40, RegAndByte, Uart_Number, + NULL, 0, 300); + + return result; +} + +/* + * qt_setuart + * issuse a SET_UART vendor-spcific request on the default control pipe + * If successful sets baud rate divisor and LCR value + */ +static int qt_setuart(struct usb_serial *serial, unsigned short Uart_Number, + unsigned short default_divisor, unsigned char default_LCR) +{ + int result; + unsigned short UartNumandLCR; + + UartNumandLCR = (default_LCR << 8) + Uart_Number; + + result = + usb_control_msg(serial->dev, usb_sndctrlpipe(serial->dev, 0), + QT_GET_SET_UART, 0x40, default_divisor, + UartNumandLCR, NULL, 0, 300); + + return result; +} + +static int BoxSetHW_FlowCtrl(struct usb_serial *serial, unsigned int index, + int bSet) +{ + __u8 mcr = 0; + __u8 msr = 0, MOUT_Value = 0; + unsigned int status; + + if (bSet == 1) { + /* flow control, box will clear RTS line to prevent remote */ + mcr = SERIAL_MCR_RTS; + } /* device from xmitting more chars */ + else { + /* no flow control to remote device */ + mcr = 0; + + } + MOUT_Value = mcr << 8; + + if (bSet == 1) { + /* flow control, box will inhibit xmit data if CTS line is + * asserted */ + msr = SERIAL_MSR_CTS; + } else { + /* Box will not inhimbe xmit data due to CTS line */ + msr = 0; + } + MOUT_Value |= msr; + + status = + usb_control_msg(serial->dev, usb_sndctrlpipe(serial->dev, 0), + QT_HW_FLOW_CONTROL_MASK, 0x40, MOUT_Value, + index, NULL, 0, 300); + return status; + +} + +static int BoxSetSW_FlowCtrl(struct usb_serial *serial, __u16 index, + unsigned char stop_char, unsigned char start_char) +{ + __u16 nSWflowout; + int result; + + nSWflowout = start_char << 8; + nSWflowout = (unsigned short)stop_char; + + result = + usb_control_msg(serial->dev, usb_sndctrlpipe(serial->dev, 0), + QT_SW_FLOW_CONTROL_MASK, 0x40, nSWflowout, + index, NULL, 0, 300); + return result; + +} + +static int BoxDisable_SW_FlowCtrl(struct usb_serial *serial, __u16 index) +{ + int result; + + result = + usb_control_msg(serial->dev, usb_sndctrlpipe(serial->dev, 0), + QT_SW_FLOW_CONTROL_DISABLE, 0x40, 0, index, + NULL, 0, 300); + return result; + +} + +static int qt_startup(struct usb_serial *serial) +{ + struct usb_serial_port *port; + struct quatech_port *qt_port; + struct qt_get_device_data DeviceData; + int i; + int status; + + dbg("enterting %s", __func__); + + /* Now setup per port private data */ + for (i = 0; i < serial->num_ports; i++) { + port = serial->port[i]; + qt_port = kzalloc(sizeof(*qt_port), GFP_KERNEL); + if (!qt_port) { + dbg("%s: kmalloc for quatech_port (%d) failed!.", + __func__, i); + return -ENOMEM; + } + spin_lock_init(&qt_port->lock); + + usb_set_serial_port_data(port, qt_port); + + } + + status = qt_get_device(serial, &DeviceData); + if (status < 0) { + dbg(__FILE__ "box_get_device failed"); + goto startup_error; + } + + dbg(__FILE__ "DeviceData.portb = 0x%x", DeviceData.portb); + + DeviceData.portb &= ~FULLPWRBIT; + dbg(__FILE__ "Changing DeviceData.portb to 0x%x", DeviceData.portb); + + status = qt_set_device(serial, &DeviceData); + if (status < 0) { + dbg(__FILE__ "qt_set_device failed\n"); + goto startup_error; + } + + status = qt_get_device(serial, &DeviceData); + if (status < 0) { + dbg(__FILE__ "qt_get_device failed"); + goto startup_error; + } + + switch (serial->dev->descriptor.idProduct) { + case QUATECH_SSU100: + case QUATECH_DSU100: + case QUATECH_QSU100: + case QUATECH_ESU100A: + case QUATECH_ESU100B: + case QUATECH_HSU100A: + case QUATECH_HSU100B: + case QUATECH_HSU100C: + case QUATECH_HSU100D: + DeviceData.porta &= ~(RR_BITS | DUPMODE_BITS); + DeviceData.porta |= CLKS_X4; + DeviceData.portb &= ~(LOOPMODE_BITS); + DeviceData.portb |= RS232_MODE; + break; + + case QUATECH_SSU200: + case QUATECH_DSU200: + case QUATECH_QSU200: + case QUATECH_ESU200A: + case QUATECH_ESU200B: + case QUATECH_HSU200A: + case QUATECH_HSU200B: + case QUATECH_HSU200C: + case QUATECH_HSU200D: + DeviceData.porta &= ~(RR_BITS | DUPMODE_BITS); + DeviceData.porta |= CLKS_X4; + DeviceData.portb &= ~(LOOPMODE_BITS); + DeviceData.portb |= ALL_LOOPBACK; + break; + default: + DeviceData.porta &= ~(RR_BITS | DUPMODE_BITS); + DeviceData.porta |= CLKS_X4; + DeviceData.portb &= ~(LOOPMODE_BITS); + DeviceData.portb |= RS232_MODE; + break; + + } + + status = BoxSetPrebufferLevel(serial); /* sets to default value */ + if (status < 0) { + dbg(__FILE__ "BoxSetPrebufferLevel failed\n"); + goto startup_error; + } + + status = BoxSetATC(serial, ATC_DISABLED); + if (status < 0) { + dbg(__FILE__ "BoxSetATC failed\n"); + goto startup_error; + } + + dbg(__FILE__ "DeviceData.portb = 0x%x", DeviceData.portb); + + DeviceData.portb |= NEXT_BOARD_POWER_BIT; + dbg(__FILE__ "Changing DeviceData.portb to 0x%x", DeviceData.portb); + + status = qt_set_device(serial, &DeviceData); + if (status < 0) { + dbg(__FILE__ "qt_set_device failed\n"); + goto startup_error; + } + + dbg("Exit Success %s\n", __func__); + + return 0; + +startup_error: + for (i = 0; i < serial->num_ports; i++) { + port = serial->port[i]; + qt_port = qt_get_port_private(port); + kfree(qt_port); + usb_set_serial_port_data(port, NULL); + } + + dbg("Exit fail %s\n", __func__); + + return -EIO; +} + +static void qt_release(struct usb_serial *serial) +{ + struct usb_serial_port *port; + struct quatech_port *qt_port; + int i; + + dbg("enterting %s", __func__); + + for (i = 0; i < serial->num_ports; i++) { + port = serial->port[i]; + if (!port) + continue; + + qt_port = usb_get_serial_port_data(port); + kfree(qt_port); + usb_set_serial_port_data(port, NULL); + } + +} + +int qt_open(struct tty_struct *tty, + struct usb_serial_port *port, struct file *filp) +{ + struct usb_serial *serial; + struct quatech_port *quatech_port; + struct quatech_port *port0; + struct qt_open_channel_data ChannelData; + + int result; + + if (port_paranoia_check(port, __func__)) + return -ENODEV; + + dbg("%s - port %d\n", __func__, port->number); + + serial = port->serial; + + if (serial_paranoia_check(serial, __func__)) + return -ENODEV; + + quatech_port = qt_get_port_private(port); + port0 = qt_get_port_private(serial->port[0]); + + if (quatech_port == NULL || port0 == NULL) + return -ENODEV; + + usb_clear_halt(serial->dev, port->write_urb->pipe); + usb_clear_halt(serial->dev, port->read_urb->pipe); + port0->open_ports++; + + result = qt_get_device(serial, &port0->DeviceData); + + /* Port specific setups */ + result = qt_open_channel(serial, port->number, &ChannelData); + if (result < 0) { + dbg(__FILE__ "qt_open_channel failed\n"); + return result; + } + dbg(__FILE__ "qt_open_channel completed.\n"); + +/* FIXME: are these needed? Does it even do anything useful? */ + quatech_port->shadowLSR = ChannelData.line_status & + (SERIAL_LSR_OE | SERIAL_LSR_PE | SERIAL_LSR_FE | SERIAL_LSR_BI); + + quatech_port->shadowMSR = ChannelData.modem_status & + (SERIAL_MSR_CTS | SERIAL_MSR_DSR | SERIAL_MSR_RI | SERIAL_MSR_CD); + + /* Set Baud rate to default and turn off (default)flow control here */ + result = qt_setuart(serial, port->number, DEFAULT_DIVISOR, DEFAULT_LCR); + if (result < 0) { + dbg(__FILE__ "qt_setuart failed\n"); + return result; + } + dbg(__FILE__ "qt_setuart completed.\n"); + + /* + * Put this here to make it responsive to stty and defauls set by + * the tty layer + */ + /* FIXME: is this needed? */ + /* qt_set_termios(tty, port, NULL); */ + + /* Check to see if we've set up our endpoint info yet */ + if (port0->open_ports == 1) { + if (serial->port[0]->interrupt_in_buffer == NULL) { + /* set up interrupt urb */ + usb_fill_int_urb(serial->port[0]->interrupt_in_urb, + serial->dev, + usb_rcvintpipe(serial->dev, + serial->port[0]->interrupt_in_endpointAddress), + serial->port[0]->interrupt_in_buffer, + serial->port[0]-> + interrupt_in_urb->transfer_buffer_length, + qt_interrupt_callback, serial, + serial->port[0]-> + interrupt_in_urb->interval); + + result = + usb_submit_urb(serial->port[0]->interrupt_in_urb, + GFP_KERNEL); + if (result) { + dev_err(&port->dev, + "%s - Error %d submitting " + "interrupt urb\n", __func__, result); + } + + } + + } + + dbg("port number is %d \n", port->number); + dbg("serial number is %d \n", port->serial->minor); + dbg("Bulkin endpoint is %d \n", port->bulk_in_endpointAddress); + dbg("BulkOut endpoint is %d \n", port->bulk_out_endpointAddress); + dbg("Interrupt endpoint is %d \n", port->interrupt_in_endpointAddress); + dbg("port's number in the device is %d\n", quatech_port->port_num); + quatech_port->read_urb = port->read_urb; + + /* set up our bulk in urb */ + + usb_fill_bulk_urb(quatech_port->read_urb, + serial->dev, + usb_rcvbulkpipe(serial->dev, + port->bulk_in_endpointAddress), + port->bulk_in_buffer, + quatech_port->read_urb->transfer_buffer_length, + qt_read_bulk_callback, quatech_port); + + dbg("qt_open: bulkin endpoint is %d\n", port->bulk_in_endpointAddress); + quatech_port->read_urb_busy = true; + result = usb_submit_urb(quatech_port->read_urb, GFP_KERNEL); + if (result) { + dev_err(&port->dev, + "%s - Error %d submitting control urb\n", + __func__, result); + quatech_port->read_urb_busy = false; + } + + /* initialize our wait queues */ + init_waitqueue_head(&quatech_port->wait); + init_waitqueue_head(&quatech_port->msr_wait); + + /* initialize our icount structure */ + memset(&(quatech_port->icount), 0x00, sizeof(quatech_port->icount)); + + return 0; + +} + +static int qt_chars_in_buffer(struct tty_struct *tty) +{ + struct usb_serial_port *port = tty->driver_data; + struct usb_serial *serial; + int chars = 0; + + serial = get_usb_serial(port, __func__); + + dbg("%s - port %d\n", __func__, port->number); + + if (serial->num_bulk_out) { + if (port->write_urb->status == -EINPROGRESS) + chars = port->write_urb->transfer_buffer_length; + } + + dbg("%s - returns %d\n", __func__, chars); + + return chars; +} + +static void qt_block_until_empty(struct tty_struct *tty, + struct quatech_port *qt_port) +{ + int timeout = HZ / 10; + int wait = 30; + int count; + + while (1) { + + count = qt_chars_in_buffer(tty); + + if (count <= 0) + return; + + interruptible_sleep_on_timeout(&qt_port->wait, timeout); + + wait--; + if (wait == 0) { + dbg("%s - TIMEOUT", __func__); + return; + } else { + wait = 30; + } + } +} + +static void qt_close(struct tty_struct *tty, struct usb_serial_port *port, + struct file *filp) +{ + struct usb_serial *serial = port->serial; + struct quatech_port *qt_port; + struct quatech_port *port0; + int status; + unsigned int index; + status = 0; + + dbg("%s - port %d\n", __func__, port->number); + index = tty->index - serial->minor; + + qt_port = qt_get_port_private(port); + port0 = qt_get_port_private(serial->port[0]); + + /* shutdown any bulk reads that might be going on */ + if (serial->num_bulk_out) + usb_unlink_urb(port->write_urb); + if (serial->num_bulk_in) + usb_unlink_urb(port->read_urb); + + /* wait up to for transmitter to empty */ + if (serial->dev) + qt_block_until_empty(tty, qt_port); + + /* Close uart channel */ + status = qt_close_channel(serial, index); + if (status < 0) + dbg("%s - port %d qt_close_channel failed.\n", + __func__, port->number); + + port0->open_ports--; + + dbg("qt_num_open_ports in close%d:in port%d\n", + port0->open_ports, port->number); + + if (port0->open_ports == 0) { + if (serial->port[0]->interrupt_in_urb) { + dbg("%s", "Shutdown interrupt_in_urb\n"); + usb_kill_urb(serial->port[0]->interrupt_in_urb); + } + + } + + if (qt_port->write_urb) { + /* if this urb had a transfer buffer already (old tx) free it */ + if (qt_port->write_urb->transfer_buffer != NULL) + kfree(qt_port->write_urb->transfer_buffer); + usb_free_urb(qt_port->write_urb); + } + +} + +static int qt_write(struct tty_struct *tty, struct usb_serial_port *port, + const unsigned char *buf, int count) +{ + int result; + struct usb_serial *serial = get_usb_serial(port, __func__); + + if (serial == NULL) + return -ENODEV; + + dbg("%s - port %d\n", __func__, port->number); + + if (count == 0) { + dbg("%s - write request of 0 bytes\n", __func__); + return 0; + } + + /* only do something if we have a bulk out endpoint */ + if (serial->num_bulk_out) { + if (port->write_urb->status == -EINPROGRESS) { + dbg("%s - already writing\n", __func__); + return 0; + } + + count = + (count > port->bulk_out_size) ? port->bulk_out_size : count; + memcpy(port->write_urb->transfer_buffer, buf, count); + + /* set up our urb */ + + usb_fill_bulk_urb(port->write_urb, serial->dev, + usb_sndbulkpipe(serial->dev, + port-> + bulk_out_endpointAddress), + port->write_urb->transfer_buffer, count, + qt_write_bulk_callback, port); + + /* send the data out the bulk port */ + result = usb_submit_urb(port->write_urb, GFP_ATOMIC); + if (result) + dbg("%s - failed submitting write urb, error %d\n", + __func__, result); + else + result = count; + + return result; + } + + /* no bulk out, so return 0 bytes written */ + return 0; +} + +static int qt_write_room(struct tty_struct *tty) +{ + struct usb_serial_port *port = tty->driver_data; + struct usb_serial *serial; + struct quatech_port *qt_port; + unsigned long flags; + + int retval = -EINVAL; + + if (port_paranoia_check(port, __func__)) { + dbg("%s", "Invalid port\n"); + return -1; + } + + serial = get_usb_serial(port, __func__); + + if (!serial) + return -ENODEV; + + qt_port = qt_get_port_private(port); + + spin_lock_irqsave(&qt_port->lock, flags); + + dbg("%s - port %d\n", __func__, port->number); + + if (serial->num_bulk_out) { + if (port->write_urb->status != -EINPROGRESS) + retval = port->bulk_out_size; + } + + spin_unlock_irqrestore(&qt_port->lock, flags); + return retval; + +} + +static int qt_ioctl(struct tty_struct *tty, struct file *file, + unsigned int cmd, unsigned long arg) +{ + struct usb_serial_port *port = tty->driver_data; + struct quatech_port *qt_port = qt_get_port_private(port); + struct usb_serial *serial = get_usb_serial(port, __func__); + unsigned int index; + + dbg("%s cmd 0x%04x", __func__, cmd); + + index = tty->index - serial->minor; + + if (cmd == TIOCMIWAIT) { + while (qt_port != NULL) { + interruptible_sleep_on(&qt_port->msr_wait); + if (signal_pending(current)) + return -ERESTARTSYS; + else { + char diff = qt_port->diff_status; + + if (diff == 0) + return -EIO; /* no change => error */ + + /* Consume all events */ + qt_port->diff_status = 0; + + if (((arg & TIOCM_RNG) + && (diff & SERIAL_MSR_RI)) + || ((arg & TIOCM_DSR) + && (diff & SERIAL_MSR_DSR)) + || ((arg & TIOCM_CD) + && (diff & SERIAL_MSR_CD)) + || ((arg & TIOCM_CTS) + && (diff & SERIAL_MSR_CTS))) { + return 0; + } + } + } + return 0; + } + + dbg("%s -No ioctl for that one. port = %d\n", __func__, port->number); + return -ENOIOCTLCMD; +} + +static void qt_set_termios(struct tty_struct *tty, + struct usb_serial_port *port, + struct ktermios *old_termios) +{ + struct ktermios *termios = tty->termios; + unsigned char new_LCR = 0; + unsigned int cflag = termios->c_cflag; + unsigned int index; + int baud, divisor, remainder; + int status; + + dbg("%s", __func__); + + index = tty->index - port->serial->minor; + + switch (cflag) { + case CS5: + new_LCR |= SERIAL_5_DATA; + break; + case CS6: + new_LCR |= SERIAL_6_DATA; + break; + case CS7: + new_LCR |= SERIAL_7_DATA; + break; + default: + case CS8: + new_LCR |= SERIAL_8_DATA; + break; + } + + /* Parity stuff */ + if (cflag & PARENB) { + if (cflag & PARODD) + new_LCR |= SERIAL_ODD_PARITY; + else + new_LCR |= SERIAL_EVEN_PARITY; + } + if (cflag & CSTOPB) + new_LCR |= SERIAL_TWO_STOPB; + else + new_LCR |= SERIAL_TWO_STOPB; + + dbg("%s - 4\n", __func__); + + /* Thats the LCR stuff, go ahead and set it */ + baud = tty_get_baud_rate(tty); + if (!baud) + /* pick a default, any default... */ + baud = 9600; + + dbg("%s - got baud = %d\n", __func__, baud); + + divisor = MAX_BAUD_RATE / baud; + remainder = MAX_BAUD_RATE % baud; + /* Round to nearest divisor */ + if (((remainder * 2) >= baud) && (baud != 110)) + divisor++; + + /* + * Set Baud rate to default and turn off (default)flow control here + */ + status = + qt_setuart(port->serial, index, (unsigned short)divisor, new_LCR); + if (status < 0) { + dbg(__FILE__ "qt_setuart failed\n"); + return; + } + + /* Now determine flow control */ + if (cflag & CRTSCTS) { + dbg("%s - Enabling HW flow control port %d\n", __func__, + port->number); + + /* Enable RTS/CTS flow control */ + status = BoxSetHW_FlowCtrl(port->serial, index, 1); + + if (status < 0) { + dbg(__FILE__ "BoxSetHW_FlowCtrl failed\n"); + return; + } + } else { + /* Disable RTS/CTS flow control */ + dbg("%s - disabling HW flow control port %d\n", __func__, + port->number); + + status = BoxSetHW_FlowCtrl(port->serial, index, 0); + if (status < 0) { + dbg(__FILE__ "BoxSetHW_FlowCtrl failed\n"); + return; + } + + } + + /* if we are implementing XON/XOFF, set the start and stop character in + * the device */ + if (I_IXOFF(tty) || I_IXON(tty)) { + unsigned char stop_char = STOP_CHAR(tty); + unsigned char start_char = START_CHAR(tty); + status = + BoxSetSW_FlowCtrl(port->serial, index, stop_char, + start_char); + if (status < 0) + dbg(__FILE__ "BoxSetSW_FlowCtrl (enabled) failed\n"); + + } else { + /* disable SW flow control */ + status = BoxDisable_SW_FlowCtrl(port->serial, index); + if (status < 0) + dbg(__FILE__ "BoxSetSW_FlowCtrl (diabling) failed\n"); + + } + tty->termios->c_cflag &= ~CMSPAR; + /* FIXME: Error cases should be returning the actual bits changed only */ +} + +static void qt_break(struct tty_struct *tty, int break_state) +{ + struct usb_serial_port *port = tty->driver_data; + struct usb_serial *serial = get_usb_serial(port, __func__); + struct quatech_port *qt_port; + u16 index, onoff; + unsigned int result; + unsigned long flags; + + index = tty->index - serial->minor; + + qt_port = qt_get_port_private(port); + + if (break_state == -1) + onoff = 1; + else + onoff = 0; + + spin_lock_irqsave(&qt_port->lock, flags); + + dbg("%s - port %d\n", __func__, port->number); + + result = + usb_control_msg(serial->dev, usb_sndctrlpipe(serial->dev, 0), + QT_BREAK_CONTROL, 0x40, onoff, index, NULL, 0, 300); + + spin_unlock_irqrestore(&qt_port->lock, flags); +} + +static inline int qt_real_tiocmget(struct tty_struct *tty, + struct usb_serial_port *port, + struct file *file, struct usb_serial *serial) +{ + + u8 mcr; + u8 msr; + unsigned int result = 0; + int status; + unsigned int index; + + dbg("%s - port %d, tty =0x%p\n", __func__, port->number, tty); + + index = tty->index - serial->minor; + status = + BoxGetRegister(port->serial, index, MODEM_CONTROL_REGISTER, &mcr); + if (status >= 0) { + status = + BoxGetRegister(port->serial, index, + MODEM_STATUS_REGISTER, &msr); + + } + + if (status >= 0) { + result = ((mcr & SERIAL_MCR_DTR) ? TIOCM_DTR : 0) + /* DTR IS SET */ + | ((mcr & SERIAL_MCR_RTS) ? TIOCM_RTS : 0) + /* RTS IS SET */ + | ((msr & SERIAL_MSR_CTS) ? TIOCM_CTS : 0) + /* CTS is set */ + | ((msr & SERIAL_MSR_CD) ? TIOCM_CAR : 0) + /* Carrier detect is set */ + | ((msr & SERIAL_MSR_RI) ? TIOCM_RI : 0) + /* Ring indicator set */ + | ((msr & SERIAL_MSR_DSR) ? TIOCM_DSR : 0); + /* DSR is set */ + return result; + + } else + return -ESPIPE; +} + +static inline int qt_real_tiocmset(struct tty_struct *tty, + struct usb_serial_port *port, + struct file *file, + struct usb_serial *serial, + unsigned int value) +{ + + u8 mcr; + int status; + unsigned int index; + + dbg("%s - port %d\n", __func__, port->number); + + index = tty->index - serial->minor; + status = + BoxGetRegister(port->serial, index, MODEM_CONTROL_REGISTER, &mcr); + if (status < 0) + return -ESPIPE; + + /* + * Turn off the RTS and DTR and loopbcck and then only turn on what was + * asked for + */ + mcr &= ~(SERIAL_MCR_RTS | SERIAL_MCR_DTR | SERIAL_MCR_LOOP); + if (value & TIOCM_RTS) + mcr |= SERIAL_MCR_RTS; + if (value & TIOCM_DTR) + mcr |= SERIAL_MCR_DTR; + if (value & TIOCM_LOOP) + mcr |= SERIAL_MCR_LOOP; + + status = + BoxSetRegister(port->serial, index, MODEM_CONTROL_REGISTER, mcr); + if (status < 0) + return -ESPIPE; + else + return 0; +} + +static int qt_tiocmget(struct tty_struct *tty, struct file *file) +{ + struct usb_serial_port *port = tty->driver_data; + struct usb_serial *serial = get_usb_serial(port, __func__); + struct quatech_port *qt_port = qt_get_port_private(port); + int retval = -ENODEV; + unsigned long flags; + + dbg("In %s \n", __func__); + + if (!serial) + return -ENODEV; + + spin_lock_irqsave(&qt_port->lock, flags); + + dbg("%s - port %d\n", __func__, port->number); + dbg("%s - port->RxHolding = %d\n", __func__, qt_port->RxHolding); + + retval = qt_real_tiocmget(tty, port, file, serial); + + spin_unlock_irqrestore(&qt_port->lock, flags); + return retval; +} + +static int qt_tiocmset(struct tty_struct *tty, struct file *file, + unsigned int set, unsigned int clear) +{ + + struct usb_serial_port *port = tty->driver_data; + struct usb_serial *serial = get_usb_serial(port, __func__); + struct quatech_port *qt_port = qt_get_port_private(port); + unsigned long flags; + int retval = -ENODEV; + + dbg("In %s \n", __func__); + + if (!serial) + return -ENODEV; + + spin_lock_irqsave(&qt_port->lock, flags); + + dbg("%s - port %d \n", __func__, port->number); + dbg("%s - qt_port->RxHolding = %d\n", __func__, qt_port->RxHolding); + + retval = qt_real_tiocmset(tty, port, file, serial, set); + + spin_unlock_irqrestore(&qt_port->lock, flags); + return retval; +} + +static void qt_throttle(struct tty_struct *tty) +{ + struct usb_serial_port *port = tty->driver_data; + struct usb_serial *serial = get_usb_serial(port, __func__); + struct quatech_port *qt_port; + unsigned long flags; + + dbg("%s - port %d\n", __func__, port->number); + + if (!serial) + return; + + qt_port = qt_get_port_private(port); + + spin_lock_irqsave(&qt_port->lock, flags); + + /* pass on to the driver specific version of this function */ + qt_port->RxHolding = 1; + dbg("%s - port->RxHolding = 1\n", __func__); + + spin_unlock_irqrestore(&qt_port->lock, flags); + return; +} + +static void qt_unthrottle(struct tty_struct *tty) +{ + struct usb_serial_port *port = tty->driver_data; + struct usb_serial *serial = get_usb_serial(port, __func__); + struct quatech_port *qt_port; + unsigned long flags; + unsigned int result; + + if (!serial) + return; + + qt_port = qt_get_port_private(port); + + spin_lock_irqsave(&qt_port->lock, flags); + + dbg("%s - port %d\n", __func__, port->number); + + if (qt_port->RxHolding == 1) { + dbg("%s -qt_port->RxHolding == 1\n", __func__); + + qt_port->RxHolding = 0; + dbg("%s - qt_port->RxHolding = 0\n", __func__); + + /* if we have a bulk endpoint, start it up */ + if ((serial->num_bulk_in) && (qt_port->ReadBulkStopped == 1)) { + /* Start reading from the device */ + usb_fill_bulk_urb(port->read_urb, serial->dev, + usb_rcvbulkpipe(serial->dev, + port->bulk_in_endpointAddress), + port->read_urb->transfer_buffer, + port->read_urb-> + transfer_buffer_length, + qt_read_bulk_callback, port); + result = usb_submit_urb(port->read_urb, GFP_ATOMIC); + if (result) + err("%s - failed restarting read urb, error %d", + __func__, result); + } + } + spin_unlock_irqrestore(&qt_port->lock, flags); + return; + +} + +static int qt_calc_num_ports(struct usb_serial *serial) +{ + int num_ports; + + dbg("numberofendpoints: %d \n", + (int)serial->interface->cur_altsetting->desc.bNumEndpoints); + dbg("numberofendpoints: %d \n", + (int)serial->interface->altsetting->desc.bNumEndpoints); + + num_ports = + (serial->interface->cur_altsetting->desc.bNumEndpoints - 1) / 2; + + return num_ports; +} + +static struct usb_serial_driver quatech_device = { + .driver = { + .owner = THIS_MODULE, + .name = "serqt", + }, + .description = DRIVER_DESC, + .usb_driver = &serqt_usb_driver, + .id_table = serqt_id_table, + .num_ports = 8, + .open = qt_open, + .close = qt_close, + .write = qt_write, + .write_room = qt_write_room, + .chars_in_buffer = qt_chars_in_buffer, + .throttle = qt_throttle, + .unthrottle = qt_unthrottle, + .calc_num_ports = qt_calc_num_ports, + .ioctl = qt_ioctl, + .set_termios = qt_set_termios, + .break_ctl = qt_break, + .tiocmget = qt_tiocmget, + .tiocmset = qt_tiocmset, + .attach = qt_startup, + .release = qt_release, +}; + +static int __init serqt_usb_init(void) +{ + int retval; + + dbg("%s\n", __func__); + + /* register with usb-serial */ + retval = usb_serial_register(&quatech_device); + + if (retval) + goto failed_usb_serial_register; + + printk(KERN_INFO KBUILD_MODNAME ": " DRIVER_VERSION ":" + DRIVER_DESC "\n"); + + /* register with usb */ + + retval = usb_register(&serqt_usb_driver); + if (retval == 0) + return 0; + + /* if we're here, usb_register() failed */ + usb_serial_deregister(&quatech_device); +failed_usb_serial_register: + return retval; +} + +static void __exit serqt_usb_exit(void) +{ + usb_deregister(&serqt_usb_driver); + usb_serial_deregister(&quatech_device); +} + +module_init(serqt_usb_init); +module_exit(serqt_usb_exit); + +MODULE_AUTHOR(DRIVER_AUTHOR); +MODULE_DESCRIPTION(DRIVER_DESC); +MODULE_LICENSE("GPL"); + +module_param(debug, bool, S_IRUGO | S_IWUSR); +MODULE_PARM_DESC(debug, "Debug enabled or not"); |