diff options
Diffstat (limited to 'drivers/staging/slicoss/slicdump.h')
-rw-r--r-- | drivers/staging/slicoss/slicdump.h | 278 |
1 files changed, 278 insertions, 0 deletions
diff --git a/drivers/staging/slicoss/slicdump.h b/drivers/staging/slicoss/slicdump.h new file mode 100644 index 00000000000..92a9b44bcad --- /dev/null +++ b/drivers/staging/slicoss/slicdump.h @@ -0,0 +1,278 @@ +/* + * + * Copyright (c) 2000-2002 Alacritech, Inc. All rights reserved. + * + * Redistribution and use in source and binary forms, with or without + * modification, are permitted provided that the following conditions + * are met: + * + * 1. Redistributions of source code must retain the above copyright + * notice, this list of conditions and the following disclaimer. + * 2. Redistributions in binary form must reproduce the above + * copyright notice, this list of conditions and the following + * disclaimer in the documentation and/or other materials provided + * with the distribution. + * + * THIS SOFTWARE IS PROVIDED BY ALACRITECH, INC. ``AS IS'' AND ANY + * EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE + * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR + * PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL ALACRITECH, INC. OR + * CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, + * SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT + * LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF + * USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND + * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, + * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT + * OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF + * SUCH DAMAGE. + * + * NO LICENSE TO ANY ALACRITECH PATENT CLAIM IS GRANTED BY ANY COPYRIGHT + * LICENSE TO THIS OR OTHER SOFTWARE. THIS SOFTWARE MAY BE COVERED BY + * ALACRITECH PATENTS INCLUDING BUT NOT LIMITED TO U.S. PATENT NOS. 6,226,680, + * 6,247,060, 6,334,153, 6,389,479, 6,393,487, 6,427,171, 6,427,173 + * and 6,434,620. + * THIS SOFTWARE IS NOT SUBJECT TO THE GNU GENERAL PUBLIC LICENSE (GPL). + * + * The views and conclusions contained in the software and + * documentation are those of the authors and should not be + * interpreted as representing official policies, either + * expressed or implied, of Alacritech, Inc. + */ +#ifndef _SLIC_DUMP_H_ +#define _SLIC_DUMP_H_ + +#define DEBUG_SUCCESS 0 + +/*********************************************************************** + * + * Utility processor register locations + * + **********************************************************************/ +#define UTILITY_RESET 0x0 +#define UTILITY_ISP_ADDR 0x4 /* Interrupt status Pointer */ +#define UTILITY_ISR_ADDR 0x8 /* Interrupt status Register */ +#define UTILITY_ICR_ADDR 0xc /* Interrupt Control Register */ +#define UTILITY_CPR_ADDR 0x10 /* Command Pointer Register */ +#define UTILITY_DPR_ADDR 0x14 /* Data Pointer Register */ +#define UTILITY_DMP_TRQ 0x18 /* Dump queue onto ALU for analyser */ +#define UTILITY_UPP_ADDR 0x1c /* Bits 63-32 of cmd/data pointer */ + +/*********************************************************************** + * + * INIC status register bits + * + ***********************************************************************/ +#define SLIC_ISR_CC 0x10000000 /* Command complete - synchronous */ +#define SLIC_ISR_ERR 0x01000000 /* Command Error - synchronous */ +#define SLIC_ISR_CMD_MASK 0x11000000 /* Command status mask */ +#define SLIC_ISR_TPH 0x00080000 /* Transmit processor halted - async */ +#define SLIC_ISR_RPH 0x00040000 /* Receive processor halted - async */ + +/*********************************************************************** + * + * INIC Control register values + * + ***********************************************************************/ +#define SLIC_ICR_OFF 0 /* Interrupts disabled */ +#define SLIC_ICR_ON 1 /* Interrupts enabled */ +#define SLIC_ICR_MASK 2 /* Interrupts masked */ + +#define WRITE_DREG(reg, value, flush) \ +{ \ + writel((value), (reg)); \ + if ((flush)) { \ + mb(); \ + } \ +} + +/************************************************************************ + * + * Command Format + * + * Each command contains a command byte which is defined as follows: + * + * bits: 7-3 2 1-0 + * ---------------------------------------------- + * command Alt. Proc Processor + * + ************************************************************************/ + +/* + * Macro to create the command byte given the command, Alt. Proc, and + * Processor values. Note that the macro assumes that the values are + * preshifted. That is, the values for alt. proc are 0 for transmit and + * 4 for receive. + */ +#define COMMAND_BYTE(command, alt_proc, proc) ((command) | (alt_proc) | (proc)) + +/* + * Command values + */ +#define CMD_HALT 0x0 /* Send a halt to the INIC */ +#define CMD_RUN 0x8 /* Start the halted INIC */ +#define CMD_STEP 0x10 /* Single step the inic */ +#define CMD_BREAK 0x18 /* Set a breakpoint - 8 byte command */ +#define CMD_RESET_BREAK 0x20 /* Reset a breakpoint - 8 byte cmd */ +#define CMD_DUMP 0x28 /* Dump INIC memory - 8 byte command */ +#define CMD_LOAD 0x30 /* Load INIC memory - 8 byte command */ +#define CMD_MAP 0x38 /* Map out a ROM instruction - 8 BC */ +#define CMD_CAM_OPS 0x38 /* perform ops on specific CAM */ +#define CMD_XMT 0x40 /* Transmit frame */ +#define CMD_RCV 0x48 /* Receive frame */ + +/* + * Alt. Proc values + * + * When the proc value is set to the utility processor, the Alt. Proc + * specifies which processor handles the debugging. + */ +#define ALT_PROC_TRANSMIT 0x0 +#define ALT_PROC_RECEIVE 0x4 + +/* + * Proc values + */ +#define PROC_INVALID 0x0 +#define PROC_NONE 0x0 /* Gigabit use */ +#define PROC_TRANSMIT 0x1 +#define PROC_RECEIVE 0x2 +#define PROC_UTILITY 0x3 + +/****************************************************************** + * + * 8 byte command structure definitions + * + ******************************************************************/ + +/* + * Break and Reset Break command structure + */ +struct BREAK { + unsigned char command; /* Command word defined above */ + unsigned char resvd; + ushort count; /* Number of executions before break */ + u32 addr; /* Address of break point */ +}; + +/* + * Dump and Load command structure + */ +struct dump_cmd { + unsigned char cmd; /* Command word defined above */ + unsigned char desc; /* Descriptor values - defined below */ + ushort count; /* number of 4 byte words to be transferred */ + u32 addr; /* start address of dump or load */ +}; + +/* + * Receive or Transmit a frame. + */ +struct RCV_OR_XMT_FRAME { + unsigned char command; /* Command word defined above */ + unsigned char MacId; /* Mac ID of interface - transmit only */ + ushort count; /* Length of frame in bytes */ + u32 pad; /* not used */ +}; + +/* + * Values of desc field in DUMP_OR_LOAD structure + */ +#define DESC_RFILE 0x0 /* Register file */ +#define DESC_SRAM 0x1 /* SRAM */ +#define DESC_DRAM 0x2 /* DRAM */ +#define DESC_QUEUE 0x3 /* queues */ +#define DESC_REG 0x4 /* General registers (pc, status, etc) */ +#define DESC_SENSE 0x5 /* Sense register */ + +/* Descriptor field definitions for CMD_DUMP_CAM */ +#define DUMP_CAM_A 0 +#define DUMP_CAM_B 1 /* unused at present */ +#define DUMP_CAM_C 2 +#define DUMP_CAM_D 3 +#define SEARCH_CAM_A 4 +#define SEARCH_CAM_C 5 + +/* + * Map command to replace a command in ROM with a command in WCS + */ +struct MAP { + unsigned char command; /* Command word defined above */ + unsigned char not_used[3]; + ushort map_to; /* Instruction address in WCS */ + ushort map_out; /* Instruction address in ROM */ +}; + +/* + * Misc definitions + */ +#define SLIC_MAX_QUEUE 32 /* Total # of queues on the INIC (0-31)*/ +#define SLIC_4MAX_REG 512 /* Total # of 4-port file-registers */ +#define SLIC_1MAX_REG 384 /* Total # of file-registers */ +#define SLIC_GBMAX_REG 1024 /* Total # of Gbit file-registers */ +#define SLIC_NUM_REG 32 /* non-file-registers = NUM_REG in tm-simba.h */ +#define SLIC_GB_CAMA_SZE 32 +#define SLIC_GB_CAMB_SZE 16 +#define SLIC_GB_CAMAB_SZE 32 +#define SLIC_GB_CAMC_SZE 16 +#define SLIC_GB_CAMD_SZE 16 +#define SLIC_GB_CAMCD_SZE 32 + +/* + * Coredump header structure + */ +struct CORE_Q { + u32 queueOff; /* Offset of queue */ + u32 queuesize; /* size of queue */ +}; + +#define DRIVER_NAME_SIZE 32 + +struct sliccore_hdr { + unsigned char driver_version[DRIVER_NAME_SIZE]; /* Driver version string */ + u32 RcvRegOff; /* Offset of receive registers */ + u32 RcvRegsize; /* size of receive registers */ + u32 XmtRegOff; /* Offset of transmit registers */ + u32 XmtRegsize; /* size of transmit registers */ + u32 FileRegOff; /* Offset of register file */ + u32 FileRegsize; /* size of register file */ + u32 SramOff; /* Offset of Sram */ + u32 Sramsize; /* size of Sram */ + u32 DramOff; /* Offset of Dram */ + u32 Dramsize; /* size of Dram */ + CORE_Q queues[SLIC_MAX_QUEUE]; /* size and offsets of queues */ + u32 CamAMOff; /* Offset of CAM A contents */ + u32 CamASize; /* Size of Cam A */ + u32 CamBMOff; /* Offset of CAM B contents */ + u32 CamBSize; /* Size of Cam B */ + u32 CamCMOff; /* Offset of CAM C contents */ + u32 CamCSize; /* Size of Cam C */ + u32 CamDMOff; /* Offset of CAM D contents */ + u32 CamDSize; /* Size of Cam D */ +}; + +/* + * definitions needed for our kernel-mode gdb stub. + */ +/*********************************************************************** + * + * Definitions & Typedefs + * + **********************************************************************/ +#define BUFMAX 0x20000 /* 128k - size of input/output buffer */ +#define BUFMAXP2 5 /* 2**5 (32) 4K pages */ + +#define IOCTL_SIMBA_BREAK _IOW('s', 0, unsigned long) +/* #define IOCTL_SIMBA_INIT _IOW('s', 1, unsigned long) */ +#define IOCTL_SIMBA_KILL_TGT_PROC _IOW('s', 2, unsigned long) + +/*********************************************************************** + * + * Global variables + * + ***********************************************************************/ + +#define THREADRECEIVE 1 /* bit 0 of StoppedThreads */ +#define THREADTRANSMIT 2 /* bit 1 of StoppedThreads */ +#define THREADBOTH 3 /* bit 0 and 1.. */ + +#endif /* _SLIC_DUMP_H */ |