diff options
Diffstat (limited to 'drivers/staging/winbond/wbhal_f.h')
| -rw-r--r-- | drivers/staging/winbond/wbhal_f.h | 122 |
1 files changed, 122 insertions, 0 deletions
diff --git a/drivers/staging/winbond/wbhal_f.h b/drivers/staging/winbond/wbhal_f.h new file mode 100644 index 00000000000..fe25f97af72 --- /dev/null +++ b/drivers/staging/winbond/wbhal_f.h @@ -0,0 +1,122 @@ +//===================================================================== +// Device related include +//===================================================================== +#ifdef WB_LINUX + #include "linux/wbusb_f.h" + #include "linux/wb35reg_f.h" + #include "linux/wb35tx_f.h" + #include "linux/wb35rx_f.h" +#else + #include "wbusb_f.h" + #include "wb35reg_f.h" + #include "wb35tx_f.h" + #include "wb35rx_f.h" +#endif + +//==================================================================================== +// Function declaration +//==================================================================================== +void hal_remove_mapping_key( phw_data_t pHwData, PUCHAR pmac_addr ); +void hal_remove_default_key( phw_data_t pHwData, u32 index ); +unsigned char hal_set_mapping_key( phw_data_t Adapter, PUCHAR pmac_addr, u8 null_key, u8 wep_on, PUCHAR ptx_tsc, PUCHAR prx_tsc, u8 key_type, u8 key_len, PUCHAR pkey_data ); +unsigned char hal_set_default_key( phw_data_t Adapter, u8 index, u8 null_key, u8 wep_on, PUCHAR ptx_tsc, PUCHAR prx_tsc, u8 key_type, u8 key_len, PUCHAR pkey_data ); +void hal_clear_all_default_key( phw_data_t pHwData ); +void hal_clear_all_group_key( phw_data_t pHwData ); +void hal_clear_all_mapping_key( phw_data_t pHwData ); +void hal_clear_all_key( phw_data_t pHwData ); +void hal_get_ethernet_address( phw_data_t pHwData, PUCHAR current_address ); +void hal_set_ethernet_address( phw_data_t pHwData, PUCHAR current_address ); +void hal_get_permanent_address( phw_data_t pHwData, PUCHAR pethernet_address ); +unsigned char hal_init_hardware( phw_data_t pHwData, PADAPTER Adapter ); +void hal_set_power_save_mode( phw_data_t pHwData, unsigned char power_save, unsigned char wakeup, unsigned char dtim ); +void hal_get_power_save_mode( phw_data_t pHwData, PBOOLEAN pin_pwr_save ); +void hal_set_slot_time( phw_data_t pHwData, u8 type ); +#define hal_set_atim_window( _A, _ATM ) +void hal_set_rates( phw_data_t pHwData, PUCHAR pbss_rates, u8 length, unsigned char basic_rate_set ); +#define hal_set_basic_rates( _A, _R, _L ) hal_set_rates( _A, _R, _L, TRUE ) +#define hal_set_op_rates( _A, _R, _L ) hal_set_rates( _A, _R, _L, FALSE ) +void hal_start_bss( phw_data_t pHwData, u8 mac_op_mode ); +void hal_join_request( phw_data_t pHwData, u8 bss_type ); // 0:BSS STA 1:IBSS STA// +void hal_stop_sync_bss( phw_data_t pHwData ); +void hal_resume_sync_bss( phw_data_t pHwData); +void hal_set_aid( phw_data_t pHwData, u16 aid ); +void hal_set_bssid( phw_data_t pHwData, PUCHAR pbssid ); +void hal_get_bssid( phw_data_t pHwData, PUCHAR pbssid ); +void hal_set_beacon_period( phw_data_t pHwData, u16 beacon_period ); +void hal_set_listen_interval( phw_data_t pHwData, u16 listen_interval ); +void hal_set_cap_info( phw_data_t pHwData, u16 capability_info ); +void hal_set_ssid( phw_data_t pHwData, PUCHAR pssid, u8 ssid_len ); +void hal_set_current_channel( phw_data_t pHwData, ChanInfo channel ); +void hal_set_current_channel_ex( phw_data_t pHwData, ChanInfo channel ); +void hal_get_current_channel( phw_data_t pHwData, ChanInfo *channel ); +void hal_set_accept_broadcast( phw_data_t pHwData, u8 enable ); +void hal_set_accept_multicast( phw_data_t pHwData, u8 enable ); +void hal_set_accept_beacon( phw_data_t pHwData, u8 enable ); +void hal_set_multicast_address( phw_data_t pHwData, PUCHAR address, u8 number ); +u8 hal_get_accept_beacon( phw_data_t pHwData ); +void hal_stop( phw_data_t pHwData ); +void hal_halt( phw_data_t pHwData, void *ppa_data ); +void hal_start_tx0( phw_data_t pHwData ); +void hal_set_phy_type( phw_data_t pHwData, u8 PhyType ); +void hal_get_phy_type( phw_data_t pHwData, u8 *PhyType ); +unsigned char hal_reset_hardware( phw_data_t pHwData, void* ppa ); +void hal_set_cwmin( phw_data_t pHwData, u8 cwin_min ); +#define hal_get_cwmin( _A ) ( (_A)->cwmin ) +void hal_set_cwmax( phw_data_t pHwData, u16 cwin_max ); +#define hal_get_cwmax( _A ) ( (_A)->cwmax ) +void hal_set_rsn_wpa( phw_data_t pHwData, u32 * RSN_IE_Bitmap , u32 * RSN_OUI_type , unsigned char bDesiredAuthMode); +//s32 hal_get_rssi( phw_data_t pHwData, u32 HalRssi ); +s32 hal_get_rssi( phw_data_t pHwData, u32 *HalRssiArry, u8 Count ); +s32 hal_get_rssi_bss( phw_data_t pHwData, u16 idx, u8 Count ); +void hal_set_connect_info( phw_data_t pHwData, unsigned char boConnect ); +u8 hal_get_est_sq3( phw_data_t pHwData, u8 Count ); +void hal_led_control_1a( phw_data_t pHwData ); +void hal_led_control( void* S1, phw_data_t pHwData, void* S3, void* S4 ); +void hal_set_rf_power( phw_data_t pHwData, u8 PowerIndex ); // 20060621 Modify +void hal_reset_counter( phw_data_t pHwData ); +void hal_set_radio_mode( phw_data_t pHwData, unsigned char boValue); +void hal_descriptor_indicate( phw_data_t pHwData, PDESCRIPTOR pDes ); +u8 hal_get_antenna_number( phw_data_t pHwData ); +void hal_set_antenna_number( phw_data_t pHwData, u8 number ); +u32 hal_get_bss_pk_cnt( phw_data_t pHwData ); +#define hal_get_region_from_EEPROM( _A ) ( (_A)->Wb35Reg.EEPROMRegion ) +void hal_set_accept_promiscuous ( phw_data_t pHwData, u8 enable); +#define hal_get_tx_buffer( _A, _B ) Wb35Tx_get_tx_buffer( _A, _B ) +u8 hal_get_hw_radio_off ( phw_data_t pHwData ); +#define hal_software_set( _A ) (_A->SoftwareSet) +#define hal_driver_init_OK( _A ) (_A->IsInitOK) +#define hal_rssi_boundary_high( _A ) (_A->RSSI_high) +#define hal_rssi_boundary_low( _A ) (_A->RSSI_low) +#define hal_scan_interval( _A ) (_A->Scan_Interval) +void hal_scan_status_indicate( phw_data_t pHwData, u8 status); // 0: complete, 1: in progress +void hal_system_power_change( phw_data_t pHwData, u32 PowerState ); // 20051230 -=D0 1=D1 .. +void hal_surprise_remove( phw_data_t pHwData ); + +#define PHY_DEBUG( msg, args... ) + + + +void hal_rate_change( phw_data_t pHwData ); // Notify the HAL rate is changing 20060613.1 +unsigned char hal_get_dxx_reg( phw_data_t pHwData, u16 number, PULONG pValue ); +unsigned char hal_set_dxx_reg( phw_data_t pHwData, u16 number, u32 value ); +#define hal_get_time_count( _P ) (_P->time_count/10) // return 100ms count +#define hal_detect_error( _P ) (_P->WbUsb.DetectCount) +unsigned char hal_set_LED( phw_data_t pHwData, u32 Mode ); // 20061108 for WPS led control + +//------------------------------------------------------------------------- +// The follow function is unused for IS89C35 +//------------------------------------------------------------------------- +#define hal_disable_interrupt(_A) +#define hal_enable_interrupt(_A) +#define hal_get_interrupt_type( _A) +#define hal_get_clear_interrupt(_A) +#define hal_ibss_disconnect(_A) hal_stop_sync_bss(_A) +#define hal_join_request_stop(_A) +unsigned char hal_idle( phw_data_t pHwData ); +#define pa_stall_execution( _A ) //OS_SLEEP( 1 ) +#define hw_get_cxx_reg( _A, _B, _C ) +#define hw_set_cxx_reg( _A, _B, _C ) +#define hw_get_dxx_reg( _A, _B, _C ) hal_get_dxx_reg( _A, _B, (PULONG)_C ) +#define hw_set_dxx_reg( _A, _B, _C ) hal_set_dxx_reg( _A, _B, (u32)_C ) + + |