diff options
Diffstat (limited to 'drivers/uio/uio_pci_generic.c')
| -rw-r--r-- | drivers/uio/uio_pci_generic.c | 207 |
1 files changed, 207 insertions, 0 deletions
diff --git a/drivers/uio/uio_pci_generic.c b/drivers/uio/uio_pci_generic.c new file mode 100644 index 00000000000..313da35984a --- /dev/null +++ b/drivers/uio/uio_pci_generic.c @@ -0,0 +1,207 @@ +/* uio_pci_generic - generic UIO driver for PCI 2.3 devices + * + * Copyright (C) 2009 Red Hat, Inc. + * Author: Michael S. Tsirkin <mst@redhat.com> + * + * This work is licensed under the terms of the GNU GPL, version 2. + * + * Since the driver does not declare any device ids, you must allocate + * id and bind the device to the driver yourself. For example: + * + * # echo "8086 10f5" > /sys/bus/pci/drivers/uio_pci_generic/new_id + * # echo -n 0000:00:19.0 > /sys/bus/pci/drivers/e1000e/unbind + * # echo -n 0000:00:19.0 > /sys/bus/pci/drivers/uio_pci_generic/bind + * # ls -l /sys/bus/pci/devices/0000:00:19.0/driver + * .../0000:00:19.0/driver -> ../../../bus/pci/drivers/uio_pci_generic + * + * Driver won't bind to devices which do not support the Interrupt Disable Bit + * in the command register. All devices compliant to PCI 2.3 (circa 2002) and + * all compliant PCI Express devices should support this bit. + */ + +#include <linux/device.h> +#include <linux/module.h> +#include <linux/pci.h> +#include <linux/uio_driver.h> +#include <linux/spinlock.h> + +#define DRIVER_VERSION "0.01.0" +#define DRIVER_AUTHOR "Michael S. Tsirkin <mst@redhat.com>" +#define DRIVER_DESC "Generic UIO driver for PCI 2.3 devices" + +struct uio_pci_generic_dev { + struct uio_info info; + struct pci_dev *pdev; + spinlock_t lock; /* guards command register accesses */ +}; + +static inline struct uio_pci_generic_dev * +to_uio_pci_generic_dev(struct uio_info *info) +{ + return container_of(info, struct uio_pci_generic_dev, info); +} + +/* Interrupt handler. Read/modify/write the command register to disable + * the interrupt. */ +static irqreturn_t irqhandler(int irq, struct uio_info *info) +{ + struct uio_pci_generic_dev *gdev = to_uio_pci_generic_dev(info); + struct pci_dev *pdev = gdev->pdev; + irqreturn_t ret = IRQ_NONE; + u32 cmd_status_dword; + u16 origcmd, newcmd, status; + + /* We do a single dword read to retrieve both command and status. + * Document assumptions that make this possible. */ + BUILD_BUG_ON(PCI_COMMAND % 4); + BUILD_BUG_ON(PCI_COMMAND + 2 != PCI_STATUS); + + spin_lock_irq(&gdev->lock); + pci_block_user_cfg_access(pdev); + + /* Read both command and status registers in a single 32-bit operation. + * Note: we could cache the value for command and move the status read + * out of the lock if there was a way to get notified of user changes + * to command register through sysfs. Should be good for shared irqs. */ + pci_read_config_dword(pdev, PCI_COMMAND, &cmd_status_dword); + origcmd = cmd_status_dword; + status = cmd_status_dword >> 16; + + /* Check interrupt status register to see whether our device + * triggered the interrupt. */ + if (!(status & PCI_STATUS_INTERRUPT)) + goto done; + + /* We triggered the interrupt, disable it. */ + newcmd = origcmd | PCI_COMMAND_INTX_DISABLE; + if (newcmd != origcmd) + pci_write_config_word(pdev, PCI_COMMAND, newcmd); + + /* UIO core will signal the user process. */ + ret = IRQ_HANDLED; +done: + + pci_unblock_user_cfg_access(pdev); + spin_unlock_irq(&gdev->lock); + return ret; +} + +/* Verify that the device supports Interrupt Disable bit in command register, + * per PCI 2.3, by flipping this bit and reading it back: this bit was readonly + * in PCI 2.2. */ +static int __devinit verify_pci_2_3(struct pci_dev *pdev) +{ + u16 orig, new; + int err = 0; + + pci_block_user_cfg_access(pdev); + pci_read_config_word(pdev, PCI_COMMAND, &orig); + pci_write_config_word(pdev, PCI_COMMAND, + orig ^ PCI_COMMAND_INTX_DISABLE); + pci_read_config_word(pdev, PCI_COMMAND, &new); + /* There's no way to protect against + * hardware bugs or detect them reliably, but as long as we know + * what the value should be, let's go ahead and check it. */ + if ((new ^ orig) & ~PCI_COMMAND_INTX_DISABLE) { + err = -EBUSY; + dev_err(&pdev->dev, "Command changed from 0x%x to 0x%x: " + "driver or HW bug?\n", orig, new); + goto err; + } + if (!((new ^ orig) & PCI_COMMAND_INTX_DISABLE)) { + dev_warn(&pdev->dev, "Device does not support " + "disabling interrupts: unable to bind.\n"); + err = -ENODEV; + goto err; + } + /* Now restore the original value. */ + pci_write_config_word(pdev, PCI_COMMAND, orig); +err: + pci_unblock_user_cfg_access(pdev); + return err; +} + +static int __devinit probe(struct pci_dev *pdev, + const struct pci_device_id *id) +{ + struct uio_pci_generic_dev *gdev; + int err; + + if (!pdev->irq) { + dev_warn(&pdev->dev, "No IRQ assigned to device: " + "no support for interrupts?\n"); + return -ENODEV; + } + + err = pci_enable_device(pdev); + if (err) { + dev_err(&pdev->dev, "%s: pci_enable_device failed: %d\n", + __func__, err); + return err; + } + + err = verify_pci_2_3(pdev); + if (err) + goto err_verify; + + gdev = kzalloc(sizeof(struct uio_pci_generic_dev), GFP_KERNEL); + if (!gdev) { + err = -ENOMEM; + goto err_alloc; + } + + gdev->info.name = "uio_pci_generic"; + gdev->info.version = DRIVER_VERSION; + gdev->info.irq = pdev->irq; + gdev->info.irq_flags = IRQF_SHARED; + gdev->info.handler = irqhandler; + gdev->pdev = pdev; + spin_lock_init(&gdev->lock); + + if (uio_register_device(&pdev->dev, &gdev->info)) + goto err_register; + pci_set_drvdata(pdev, gdev); + + return 0; +err_register: + kfree(gdev); +err_alloc: +err_verify: + pci_disable_device(pdev); + return err; +} + +static void remove(struct pci_dev *pdev) +{ + struct uio_pci_generic_dev *gdev = pci_get_drvdata(pdev); + + uio_unregister_device(&gdev->info); + pci_disable_device(pdev); + kfree(gdev); +} + +static struct pci_driver driver = { + .name = "uio_pci_generic", + .id_table = NULL, /* only dynamic id's */ + .probe = probe, + .remove = remove, +}; + +static int __init init(void) +{ + pr_info(DRIVER_DESC " version: " DRIVER_VERSION "\n"); + return pci_register_driver(&driver); +} + +static void __exit cleanup(void) +{ + pci_unregister_driver(&driver); +} + +module_init(init); +module_exit(cleanup); + +MODULE_VERSION(DRIVER_VERSION); +MODULE_LICENSE("GPL v2"); +MODULE_AUTHOR(DRIVER_AUTHOR); +MODULE_DESCRIPTION(DRIVER_DESC); |