aboutsummaryrefslogtreecommitdiff
path: root/drivers/usb/gadget
diff options
context:
space:
mode:
Diffstat (limited to 'drivers/usb/gadget')
-rw-r--r--drivers/usb/gadget/Kconfig14
-rw-r--r--drivers/usb/gadget/Makefile13
-rw-r--r--drivers/usb/gadget/amd5536udc.c2
-rw-r--r--drivers/usb/gadget/at91_udc.c13
-rw-r--r--drivers/usb/gadget/cdc2.c246
-rw-r--r--drivers/usb/gadget/composite.c1041
-rw-r--r--drivers/usb/gadget/config.c76
-rw-r--r--drivers/usb/gadget/dummy_hcd.c4
-rw-r--r--drivers/usb/gadget/epautoconf.c1
-rw-r--r--drivers/usb/gadget/ether.c2631
-rw-r--r--drivers/usb/gadget/f_acm.c589
-rw-r--r--drivers/usb/gadget/f_ecm.c833
-rw-r--r--drivers/usb/gadget/f_loopback.c381
-rw-r--r--drivers/usb/gadget/f_rndis.c827
-rw-r--r--drivers/usb/gadget/f_serial.c296
-rw-r--r--drivers/usb/gadget/f_sourcesink.c587
-rw-r--r--drivers/usb/gadget/f_subset.c423
-rw-r--r--drivers/usb/gadget/file_storage.c4
-rw-r--r--drivers/usb/gadget/fsl_usb2_udc.c2
-rw-r--r--drivers/usb/gadget/g_zero.h25
-rw-r--r--drivers/usb/gadget/gadget_chips.h23
-rw-r--r--drivers/usb/gadget/goku_udc.c2
-rw-r--r--drivers/usb/gadget/inode.c23
-rw-r--r--drivers/usb/gadget/lh7a40x_udc.c2
-rw-r--r--drivers/usb/gadget/m66592-udc.c2
-rw-r--r--drivers/usb/gadget/ndis.h10
-rw-r--r--drivers/usb/gadget/net2280.c2
-rw-r--r--drivers/usb/gadget/omap_udc.c2
-rw-r--r--drivers/usb/gadget/printer.c7
-rw-r--r--drivers/usb/gadget/pxa25x_udc.c2
-rw-r--r--drivers/usb/gadget/pxa27x_udc.c1
-rw-r--r--drivers/usb/gadget/rndis.c421
-rw-r--r--drivers/usb/gadget/rndis.h9
-rw-r--r--drivers/usb/gadget/serial.c2315
-rw-r--r--drivers/usb/gadget/u_ether.c967
-rw-r--r--drivers/usb/gadget/u_ether.h127
-rw-r--r--drivers/usb/gadget/u_serial.c1246
-rw-r--r--drivers/usb/gadget/u_serial.h58
-rw-r--r--drivers/usb/gadget/zero.c1162
39 files changed, 8315 insertions, 6074 deletions
diff --git a/drivers/usb/gadget/Kconfig b/drivers/usb/gadget/Kconfig
index d6bab0d5f45..c6a8c6b1116 100644
--- a/drivers/usb/gadget/Kconfig
+++ b/drivers/usb/gadget/Kconfig
@@ -586,6 +586,20 @@ config USB_G_PRINTER
For more information, see Documentation/usb/gadget_printer.txt
which includes sample code for accessing the device file.
+config USB_CDC_COMPOSITE
+ tristate "CDC Composite Device (Ethernet and ACM)"
+ depends on NET
+ help
+ This driver provides two functions in one configuration:
+ a CDC Ethernet (ECM) link, and a CDC ACM (serial port) link.
+
+ This driver requires four bulk and two interrupt endpoints,
+ plus the ability to handle altsettings. Not all peripheral
+ controllers are that capable.
+
+ Say "y" to link the driver statically, or "m" to build a
+ dynamically linked module.
+
# put drivers that need isochronous transfer support (for audio
# or video class gadget drivers), or specific hardware, here.
diff --git a/drivers/usb/gadget/Makefile b/drivers/usb/gadget/Makefile
index e258afd25fa..fcb5cb9094d 100644
--- a/drivers/usb/gadget/Makefile
+++ b/drivers/usb/gadget/Makefile
@@ -22,18 +22,22 @@ obj-$(CONFIG_USB_M66592) += m66592-udc.o
#
# USB gadget drivers
#
-g_zero-objs := zero.o usbstring.o config.o epautoconf.o
-g_ether-objs := ether.o usbstring.o config.o epautoconf.o
-g_serial-objs := serial.o usbstring.o config.o epautoconf.o
+C_UTILS = composite.o usbstring.o config.o epautoconf.o
+
+g_zero-objs := zero.o f_sourcesink.o f_loopback.o $(C_UTILS)
+g_ether-objs := ether.o u_ether.o f_subset.o f_ecm.o $(C_UTILS)
+g_serial-objs := serial.o u_serial.o f_acm.o f_serial.o $(C_UTILS)
g_midi-objs := gmidi.o usbstring.o config.o epautoconf.o
gadgetfs-objs := inode.o
g_file_storage-objs := file_storage.o usbstring.o config.o \
epautoconf.o
g_printer-objs := printer.o usbstring.o config.o \
epautoconf.o
+g_cdc-objs := cdc2.o u_ether.o f_ecm.o \
+ u_serial.o f_acm.o $(C_UTILS)
ifeq ($(CONFIG_USB_ETH_RNDIS),y)
- g_ether-objs += rndis.o
+ g_ether-objs += f_rndis.o rndis.o
endif
obj-$(CONFIG_USB_ZERO) += g_zero.o
@@ -43,4 +47,5 @@ obj-$(CONFIG_USB_FILE_STORAGE) += g_file_storage.o
obj-$(CONFIG_USB_G_SERIAL) += g_serial.o
obj-$(CONFIG_USB_G_PRINTER) += g_printer.o
obj-$(CONFIG_USB_MIDI_GADGET) += g_midi.o
+obj-$(CONFIG_USB_CDC_COMPOSITE) += g_cdc.o
diff --git a/drivers/usb/gadget/amd5536udc.c b/drivers/usb/gadget/amd5536udc.c
index f261d2a9a5f..1500e1b3c30 100644
--- a/drivers/usb/gadget/amd5536udc.c
+++ b/drivers/usb/gadget/amd5536udc.c
@@ -3342,7 +3342,7 @@ static int udc_probe(struct udc *dev)
spin_lock_init(&dev->lock);
dev->gadget.ops = &udc_ops;
- strcpy(dev->gadget.dev.bus_id, "gadget");
+ dev_set_name(&dev->gadget.dev, "gadget");
dev->gadget.dev.release = gadget_release;
dev->gadget.name = name;
dev->gadget.name = name;
diff --git a/drivers/usb/gadget/at91_udc.c b/drivers/usb/gadget/at91_udc.c
index b6b2a0a5ba3..e2d8a5d86c4 100644
--- a/drivers/usb/gadget/at91_udc.c
+++ b/drivers/usb/gadget/at91_udc.c
@@ -1687,6 +1687,19 @@ static int __init at91udc_probe(struct platform_device *pdev)
udc->board.pullup_active_low);
}
+ /* newer chips have more FIFO memory than rm9200 */
+ if (cpu_is_at91sam9260()) {
+ udc->ep[0].maxpacket = 64;
+ udc->ep[3].maxpacket = 64;
+ udc->ep[4].maxpacket = 512;
+ udc->ep[5].maxpacket = 512;
+ } else if (cpu_is_at91sam9261()) {
+ udc->ep[3].maxpacket = 64;
+ } else if (cpu_is_at91sam9263()) {
+ udc->ep[0].maxpacket = 64;
+ udc->ep[3].maxpacket = 64;
+ }
+
udc->udp_baseaddr = ioremap(res->start, res->end - res->start + 1);
if (!udc->udp_baseaddr) {
retval = -ENOMEM;
diff --git a/drivers/usb/gadget/cdc2.c b/drivers/usb/gadget/cdc2.c
new file mode 100644
index 00000000000..d490d028950
--- /dev/null
+++ b/drivers/usb/gadget/cdc2.c
@@ -0,0 +1,246 @@
+/*
+ * cdc2.c -- CDC Composite driver, with ECM and ACM support
+ *
+ * Copyright (C) 2008 David Brownell
+ * Copyright (C) 2008 Nokia Corporation
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
+ */
+
+#include <linux/kernel.h>
+#include <linux/utsname.h>
+
+#include "u_ether.h"
+#include "u_serial.h"
+
+
+#define DRIVER_DESC "CDC Composite Gadget"
+#define DRIVER_VERSION "King Kamehameha Day 2008"
+
+/*-------------------------------------------------------------------------*/
+
+/* DO NOT REUSE THESE IDs with a protocol-incompatible driver!! Ever!!
+ * Instead: allocate your own, using normal USB-IF procedures.
+ */
+
+/* Thanks to NetChip Technologies for donating this product ID.
+ * It's for devices with only this composite CDC configuration.
+ */
+#define CDC_VENDOR_NUM 0x0525 /* NetChip */
+#define CDC_PRODUCT_NUM 0xa4aa /* CDC Composite: ECM + ACM */
+
+/*-------------------------------------------------------------------------*/
+
+static struct usb_device_descriptor device_desc = {
+ .bLength = sizeof device_desc,
+ .bDescriptorType = USB_DT_DEVICE,
+
+ .bcdUSB = __constant_cpu_to_le16(0x0200),
+
+ .bDeviceClass = USB_CLASS_COMM,
+ .bDeviceSubClass = 0,
+ .bDeviceProtocol = 0,
+ /* .bMaxPacketSize0 = f(hardware) */
+
+ /* Vendor and product id can be overridden by module parameters. */
+ .idVendor = __constant_cpu_to_le16(CDC_VENDOR_NUM),
+ .idProduct = __constant_cpu_to_le16(CDC_PRODUCT_NUM),
+ /* .bcdDevice = f(hardware) */
+ /* .iManufacturer = DYNAMIC */
+ /* .iProduct = DYNAMIC */
+ /* NO SERIAL NUMBER */
+ .bNumConfigurations = 1,
+};
+
+static struct usb_otg_descriptor otg_descriptor = {
+ .bLength = sizeof otg_descriptor,
+ .bDescriptorType = USB_DT_OTG,
+
+ /* REVISIT SRP-only hardware is possible, although
+ * it would not be called "OTG" ...
+ */
+ .bmAttributes = USB_OTG_SRP | USB_OTG_HNP,
+};
+
+static const struct usb_descriptor_header *otg_desc[] = {
+ (struct usb_descriptor_header *) &otg_descriptor,
+ NULL,
+};
+
+
+/* string IDs are assigned dynamically */
+
+#define STRING_MANUFACTURER_IDX 0
+#define STRING_PRODUCT_IDX 1
+
+static char manufacturer[50];
+
+static struct usb_string strings_dev[] = {
+ [STRING_MANUFACTURER_IDX].s = manufacturer,
+ [STRING_PRODUCT_IDX].s = DRIVER_DESC,
+ { } /* end of list */
+};
+
+static struct usb_gadget_strings stringtab_dev = {
+ .language = 0x0409, /* en-us */
+ .strings = strings_dev,
+};
+
+static struct usb_gadget_strings *dev_strings[] = {
+ &stringtab_dev,
+ NULL,
+};
+
+static u8 hostaddr[ETH_ALEN];
+
+/*-------------------------------------------------------------------------*/
+
+/*
+ * We _always_ have both CDC ECM and CDC ACM functions.
+ */
+static int __init cdc_do_config(struct usb_configuration *c)
+{
+ int status;
+
+ if (gadget_is_otg(c->cdev->gadget)) {
+ c->descriptors = otg_desc;
+ c->bmAttributes |= USB_CONFIG_ATT_WAKEUP;
+ }
+
+ status = ecm_bind_config(c, hostaddr);
+ if (status < 0)
+ return status;
+
+ status = acm_bind_config(c, 0);
+ if (status < 0)
+ return status;
+
+ return 0;
+}
+
+static struct usb_configuration cdc_config_driver = {
+ .label = "CDC Composite (ECM + ACM)",
+ .bind = cdc_do_config,
+ .bConfigurationValue = 1,
+ /* .iConfiguration = DYNAMIC */
+ .bmAttributes = USB_CONFIG_ATT_SELFPOWER,
+ .bMaxPower = 1, /* 2 mA, minimal */
+};
+
+/*-------------------------------------------------------------------------*/
+
+static int __init cdc_bind(struct usb_composite_dev *cdev)
+{
+ int gcnum;
+ struct usb_gadget *gadget = cdev->gadget;
+ int status;
+
+ if (!can_support_ecm(cdev->gadget)) {
+ ERROR(cdev, "controller '%s' not usable\n", gadget->name);
+ return -EINVAL;
+ }
+
+ /* set up network link layer */
+ status = gether_setup(cdev->gadget, hostaddr);
+ if (status < 0)
+ return status;
+
+ /* set up serial link layer */
+ status = gserial_setup(cdev->gadget, 1);
+ if (status < 0)
+ goto fail0;
+
+ gcnum = usb_gadget_controller_number(gadget);
+ if (gcnum >= 0)
+ device_desc.bcdDevice = cpu_to_le16(0x0300 | gcnum);
+ else {
+ /* We assume that can_support_ecm() tells the truth;
+ * but if the controller isn't recognized at all then
+ * that assumption is a bit more likely to be wrong.
+ */
+ WARN(cdev, "controller '%s' not recognized; trying %s\n",
+ gadget->name,
+ cdc_config_driver.label);
+ device_desc.bcdDevice =
+ __constant_cpu_to_le16(0x0300 | 0x0099);
+ }
+
+
+ /* Allocate string descriptor numbers ... note that string
+ * contents can be overridden by the composite_dev glue.
+ */
+
+ /* device descriptor strings: manufacturer, product */
+ snprintf(manufacturer, sizeof manufacturer, "%s %s with %s",
+ init_utsname()->sysname, init_utsname()->release,
+ gadget->name);
+ status = usb_string_id(cdev);
+ if (status < 0)
+ goto fail1;
+ strings_dev[STRING_MANUFACTURER_IDX].id = status;
+ device_desc.iManufacturer = status;
+
+ status = usb_string_id(cdev);
+ if (status < 0)
+ goto fail1;
+ strings_dev[STRING_PRODUCT_IDX].id = status;
+ device_desc.iProduct = status;
+
+ /* register our configuration */
+ status = usb_add_config(cdev, &cdc_config_driver);
+ if (status < 0)
+ goto fail1;
+
+ INFO(cdev, "%s, version: " DRIVER_VERSION "\n", DRIVER_DESC);
+
+ return 0;
+
+fail1:
+ gserial_cleanup();
+fail0:
+ gether_cleanup();
+ return status;
+}
+
+static int __exit cdc_unbind(struct usb_composite_dev *cdev)
+{
+ gserial_cleanup();
+ gether_cleanup();
+ return 0;
+}
+
+static struct usb_composite_driver cdc_driver = {
+ .name = "g_cdc",
+ .dev = &device_desc,
+ .strings = dev_strings,
+ .bind = cdc_bind,
+ .unbind = __exit_p(cdc_unbind),
+};
+
+MODULE_DESCRIPTION(DRIVER_DESC);
+MODULE_AUTHOR("David Brownell");
+MODULE_LICENSE("GPL");
+
+static int __init init(void)
+{
+ return usb_composite_register(&cdc_driver);
+}
+module_init(init);
+
+static void __exit cleanup(void)
+{
+ usb_composite_unregister(&cdc_driver);
+}
+module_exit(cleanup);
diff --git a/drivers/usb/gadget/composite.c b/drivers/usb/gadget/composite.c
new file mode 100644
index 00000000000..85c876c1f15
--- /dev/null
+++ b/drivers/usb/gadget/composite.c
@@ -0,0 +1,1041 @@
+/*
+ * composite.c - infrastructure for Composite USB Gadgets
+ *
+ * Copyright (C) 2006-2008 David Brownell
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
+ */
+
+/* #define VERBOSE_DEBUG */
+
+#include <linux/kallsyms.h>
+#include <linux/kernel.h>
+#include <linux/slab.h>
+#include <linux/device.h>
+
+#include <linux/usb/composite.h>
+
+
+/*
+ * The code in this file is utility code, used to build a gadget driver
+ * from one or more "function" drivers, one or more "configuration"
+ * objects, and a "usb_composite_driver" by gluing them together along
+ * with the relevant device-wide data.
+ */
+
+/* big enough to hold our biggest descriptor */
+#define USB_BUFSIZ 512
+
+static struct usb_composite_driver *composite;
+
+/* Some systems will need runtime overrides for the product identifers
+ * published in the device descriptor, either numbers or strings or both.
+ * String parameters are in UTF-8 (superset of ASCII's 7 bit characters).
+ */
+
+static ushort idVendor;
+module_param(idVendor, ushort, 0);
+MODULE_PARM_DESC(idVendor, "USB Vendor ID");
+
+static ushort idProduct;
+module_param(idProduct, ushort, 0);
+MODULE_PARM_DESC(idProduct, "USB Product ID");
+
+static ushort bcdDevice;
+module_param(bcdDevice, ushort, 0);
+MODULE_PARM_DESC(bcdDevice, "USB Device version (BCD)");
+
+static char *iManufacturer;
+module_param(iManufacturer, charp, 0);
+MODULE_PARM_DESC(iManufacturer, "USB Manufacturer string");
+
+static char *iProduct;
+module_param(iProduct, charp, 0);
+MODULE_PARM_DESC(iProduct, "USB Product string");
+
+static char *iSerialNumber;
+module_param(iSerialNumber, charp, 0);
+MODULE_PARM_DESC(iSerialNumber, "SerialNumber string");
+
+/*-------------------------------------------------------------------------*/
+
+/**
+ * usb_add_function() - add a function to a configuration
+ * @config: the configuration
+ * @function: the function being added
+ * Context: single threaded during gadget setup
+ *
+ * After initialization, each configuration must have one or more
+ * functions added to it. Adding a function involves calling its @bind()
+ * method to allocate resources such as interface and string identifiers
+ * and endpoints.
+ *
+ * This function returns the value of the function's bind(), which is
+ * zero for success else a negative errno value.
+ */
+int __init usb_add_function(struct usb_configuration *config,
+ struct usb_function *function)
+{
+ int value = -EINVAL;
+
+ DBG(config->cdev, "adding '%s'/%p to config '%s'/%p\n",
+ function->name, function,
+ config->label, config);
+
+ if (!function->set_alt || !function->disable)
+ goto done;
+
+ function->config = config;
+ list_add_tail(&function->list, &config->functions);
+
+ /* REVISIT *require* function->bind? */
+ if (function->bind) {
+ value = function->bind(config, function);
+ if (value < 0) {
+ list_del(&function->list);
+ function->config = NULL;
+ }
+ } else
+ value = 0;
+
+ /* We allow configurations that don't work at both speeds.
+ * If we run into a lowspeed Linux system, treat it the same
+ * as full speed ... it's the function drivers that will need
+ * to avoid bulk and ISO transfers.
+ */
+ if (!config->fullspeed && function->descriptors)
+ config->fullspeed = true;
+ if (!config->highspeed && function->hs_descriptors)
+ config->highspeed = true;
+
+done:
+ if (value)
+ DBG(config->cdev, "adding '%s'/%p --> %d\n",
+ function->name, function, value);
+ return value;
+}
+
+/**
+ * usb_interface_id() - allocate an unused interface ID
+ * @config: configuration associated with the interface
+ * @function: function handling the interface
+ * Context: single threaded during gadget setup
+ *
+ * usb_interface_id() is called from usb_function.bind() callbacks to
+ * allocate new interface IDs. The function driver will then store that
+ * ID in interface, association, CDC union, and other descriptors. It
+ * will also handle any control requests targetted at that interface,
+ * particularly changing its altsetting via set_alt(). There may
+ * also be class-specific or vendor-specific requests to handle.
+ *
+ * All interface identifier should be allocated using this routine, to
+ * ensure that for example different functions don't wrongly assign
+ * different meanings to the same identifier. Note that since interface
+ * identifers are configuration-specific, functions used in more than
+ * one configuration (or more than once in a given configuration) need
+ * multiple versions of the relevant descriptors.
+ *
+ * Returns the interface ID which was allocated; or -ENODEV if no
+ * more interface IDs can be allocated.
+ */
+int __init usb_interface_id(struct usb_configuration *config,
+ struct usb_function *function)
+{
+ unsigned id = config->next_interface_id;
+
+ if (id < MAX_CONFIG_INTERFACES) {
+ config->interface[id] = function;
+ config->next_interface_id = id + 1;
+ return id;
+ }
+ return -ENODEV;
+}
+
+static int config_buf(struct usb_configuration *config,
+ enum usb_device_speed speed, void *buf, u8 type)
+{
+ struct usb_config_descriptor *c = buf;
+ void *next = buf + USB_DT_CONFIG_SIZE;
+ int len = USB_BUFSIZ - USB_DT_CONFIG_SIZE;
+ struct usb_function *f;
+ int status;
+
+ /* write the config descriptor */
+ c = buf;
+ c->bLength = USB_DT_CONFIG_SIZE;
+ c->bDescriptorType = type;
+ /* wTotalLength is written later */
+ c->bNumInterfaces = config->next_interface_id;
+ c->bConfigurationValue = config->bConfigurationValue;
+ c->iConfiguration = config->iConfiguration;
+ c->bmAttributes = USB_CONFIG_ATT_ONE | config->bmAttributes;
+ c->bMaxPower = config->bMaxPower;
+
+ /* There may be e.g. OTG descriptors */
+ if (config->descriptors) {
+ status = usb_descriptor_fillbuf(next, len,
+ config->descriptors);
+ if (status < 0)
+ return status;
+ len -= status;
+ next += status;
+ }
+
+ /* add each function's descriptors */
+ list_for_each_entry(f, &config->functions, list) {
+ struct usb_descriptor_header **descriptors;
+
+ if (speed == USB_SPEED_HIGH)
+ descriptors = f->hs_descriptors;
+ else
+ descriptors = f->descriptors;
+ if (!descriptors)
+ continue;
+ status = usb_descriptor_fillbuf(next, len,
+ (const struct usb_descriptor_header **) descriptors);
+ if (status < 0)
+ return status;
+ len -= status;
+ next += status;
+ }
+
+ len = next - buf;
+ c->wTotalLength = cpu_to_le16(len);
+ return len;
+}
+
+static int config_desc(struct usb_composite_dev *cdev, unsigned w_value)
+{
+ struct usb_gadget *gadget = cdev->gadget;
+ struct usb_configuration *c;
+ u8 type = w_value >> 8;
+ enum usb_device_speed speed = USB_SPEED_UNKNOWN;
+
+ if (gadget_is_dualspeed(gadget)) {
+ int hs = 0;
+
+ if (gadget->speed == USB_SPEED_HIGH)
+ hs = 1;
+ if (type == USB_DT_OTHER_SPEED_CONFIG)
+ hs = !hs;
+ if (hs)
+ speed = USB_SPEED_HIGH;
+
+ }
+
+ /* This is a lookup by config *INDEX* */
+ w_value &= 0xff;
+ list_for_each_entry(c, &cdev->configs, list) {
+ /* ignore configs that won't work at this speed */
+ if (speed == USB_SPEED_HIGH) {
+ if (!c->highspeed)
+ continue;
+ } else {
+ if (!c->fullspeed)
+ continue;
+ }
+ if (w_value == 0)
+ return config_buf(c, speed, cdev->req->buf, type);
+ w_value--;
+ }
+ return -EINVAL;
+}
+
+static int count_configs(struct usb_composite_dev *cdev, unsigned type)
+{
+ struct usb_gadget *gadget = cdev->gadget;
+ struct usb_configuration *c;
+ unsigned count = 0;
+ int hs = 0;
+
+ if (gadget_is_dualspeed(gadget)) {
+ if (gadget->speed == USB_SPEED_HIGH)
+ hs = 1;
+ if (type == USB_DT_DEVICE_QUALIFIER)
+ hs = !hs;
+ }
+ list_for_each_entry(c, &cdev->configs, list) {
+ /* ignore configs that won't work at this speed */
+ if (hs) {
+ if (!c->highspeed)
+ continue;
+ } else {
+ if (!c->fullspeed)
+ continue;
+ }
+ count++;
+ }
+ return count;
+}
+
+static void device_qual(struct usb_composite_dev *cdev)
+{
+ struct usb_qualifier_descriptor *qual = cdev->req->buf;
+
+ qual->bLength = sizeof(*qual);
+ qual->bDescriptorType = USB_DT_DEVICE_QUALIFIER;
+ /* POLICY: same bcdUSB and device type info at both speeds */
+ qual->bcdUSB = cdev->desc.bcdUSB;
+ qual->bDeviceClass = cdev->desc.bDeviceClass;
+ qual->bDeviceSubClass = cdev->desc.bDeviceSubClass;
+ qual->bDeviceProtocol = cdev->desc.bDeviceProtocol;
+ /* ASSUME same EP0 fifo size at both speeds */
+ qual->bMaxPacketSize0 = cdev->desc.bMaxPacketSize0;
+ qual->bNumConfigurations = count_configs(cdev, USB_DT_DEVICE_QUALIFIER);
+ qual->bRESERVED = 0;
+}
+
+/*-------------------------------------------------------------------------*/
+
+static void reset_config(struct usb_composite_dev *cdev)
+{
+ struct usb_function *f;
+
+ DBG(cdev, "reset config\n");
+
+ list_for_each_entry(f, &cdev->config->functions, list) {
+ if (f->disable)
+ f->disable(f);
+ }
+ cdev->config = NULL;
+}
+
+static int set_config(struct usb_composite_dev *cdev,
+ const struct usb_ctrlrequest *ctrl, unsigned number)
+{
+ struct usb_gadget *gadget = cdev->gadget;
+ struct usb_configuration *c = NULL;
+ int result = -EINVAL;
+ unsigned power = gadget_is_otg(gadget) ? 8 : 100;
+ int tmp;
+
+ if (cdev->config)
+ reset_config(cdev);
+
+ if (number) {
+ list_for_each_entry(c, &cdev->configs, list) {
+ if (c->bConfigurationValue == number) {
+ result = 0;
+ break;
+ }
+ }
+ if (result < 0)
+ goto done;
+ } else
+ result = 0;
+
+ INFO(cdev, "%s speed config #%d: %s\n",
+ ({ char *speed;
+ switch (gadget->speed) {
+ case USB_SPEED_LOW: speed = "low"; break;
+ case USB_SPEED_FULL: speed = "full"; break;
+ case USB_SPEED_HIGH: speed = "high"; break;
+ default: speed = "?"; break;
+ } ; speed; }), number, c ? c->label : "unconfigured");
+
+ if (!c)
+ goto done;
+
+ cdev->config = c;
+
+ /* Initialize all interfaces by setting them to altsetting zero. */
+ for (tmp = 0; tmp < MAX_CONFIG_INTERFACES; tmp++) {
+ struct usb_function *f = c->interface[tmp];
+
+ if (!f)
+ break;
+
+ result = f->set_alt(f, tmp, 0);
+ if (result < 0) {
+ DBG(cdev, "interface %d (%s/%p) alt 0 --> %d\n",
+ tmp, f->name, f, result);
+
+ reset_config(cdev);
+ goto done;
+ }
+ }
+
+ /* when we return, be sure our power usage is valid */
+ power = 2 * c->bMaxPower;
+done:
+ usb_gadget_vbus_draw(gadget, power);
+ return result;
+}
+
+/**
+ * usb_add_config() - add a configuration to a device.
+ * @cdev: wraps the USB gadget
+ * @config: the configuration, with bConfigurationValue assigned
+ * Context: single threaded during gadget setup
+ *
+ * One of the main tasks of a composite driver's bind() routine is to
+ * add each of the configurations it supports, using this routine.
+ *
+ * This function returns the value of the configuration's bind(), which
+ * is zero for success else a negative errno value. Binding configurations
+ * assigns global resources including string IDs, and per-configuration
+ * resources such as interface IDs and endpoints.
+ */
+int __init usb_add_config(struct usb_composite_dev *cdev,
+ struct usb_configuration *config)
+{
+ int status = -EINVAL;
+ struct usb_configuration *c;
+
+ DBG(cdev, "adding config #%u '%s'/%p\n",
+ config->bConfigurationValue,
+ config->label, config);
+
+ if (!config->bConfigurationValue || !config->bind)
+ goto done;
+
+ /* Prevent duplicate configuration identifiers */
+ list_for_each_entry(c, &cdev->configs, list) {
+ if (c->bConfigurationValue == config->bConfigurationValue) {
+ status = -EBUSY;
+ goto done;
+ }
+ }
+
+ config->cdev = cdev;
+ list_add_tail(&config->list, &cdev->configs);
+
+ INIT_LIST_HEAD(&config->functions);
+ config->next_interface_id = 0;
+
+ status = config->bind(config);
+ if (status < 0) {
+ list_del(&config->list);
+ config->cdev = NULL;
+ } else {
+ unsigned i;
+
+ DBG(cdev, "cfg %d/%p speeds:%s%s\n",
+ config->bConfigurationValue, config,
+ config->highspeed ? " high" : "",
+ config->fullspeed
+ ? (gadget_is_dualspeed(cdev->gadget)
+ ? " full"
+ : " full/low")
+ : "");
+
+ for (i = 0; i < MAX_CONFIG_INTERFACES; i++) {
+ struct usb_function *f = config->interface[i];
+
+ if (!f)
+ continue;
+ DBG(cdev, " interface %d = %s/%p\n",
+ i, f->name, f);
+ }
+ }
+
+ /* set_alt(), or next config->bind(), sets up
+ * ep->driver_data as needed.
+ */
+ usb_ep_autoconfig_reset(cdev->gadget);
+
+done:
+ if (status)
+ DBG(cdev, "added config '%s'/%u --> %d\n", config->label,
+ config->bConfigurationValue, status);
+ return status;
+}
+
+/*-------------------------------------------------------------------------*/
+
+/* We support strings in multiple languages ... string descriptor zero
+ * says which languages are supported. The typical case will be that
+ * only one language (probably English) is used, with I18N handled on
+ * the host side.
+ */
+
+static void collect_langs(struct usb_gadget_strings **sp, __le16 *buf)
+{
+ const struct usb_gadget_strings *s;
+ u16 language;
+ __le16 *tmp;
+
+ while (*sp) {
+ s = *sp;
+ language = cpu_to_le16(s->language);
+ for (tmp = buf; *tmp && tmp < &buf[126]; tmp++) {
+ if (*tmp == language)
+ goto repeat;
+ }
+ *tmp++ = language;
+repeat:
+ sp++;
+ }
+}
+
+static int lookup_string(
+ struct usb_gadget_strings **sp,
+ void *buf,
+ u16 language,
+ int id
+)
+{
+ struct usb_gadget_strings *s;
+ int value;
+
+ while (*sp) {
+ s = *sp++;
+ if (s->language != language)
+ continue;
+ value = usb_gadget_get_string(s, id, buf);
+ if (value > 0)
+ return value;
+ }
+ return -EINVAL;
+}
+
+static int get_string(struct usb_composite_dev *cdev,
+ void *buf, u16 language, int id)
+{
+ struct usb_configuration *c;
+ struct usb_function *f;
+ int len;
+
+ /* Yes, not only is USB's I18N support probably more than most
+ * folk will ever care about ... also, it's all supported here.
+ * (Except for UTF8 support for Unicode's "Astral Planes".)
+ */
+
+ /* 0 == report all available language codes */
+ if (id == 0) {
+ struct usb_string_descriptor *s = buf;
+ struct usb_gadget_strings **sp;
+
+ memset(s, 0, 256);
+ s->bDescriptorType = USB_DT_STRING;
+
+ sp = composite->strings;
+ if (sp)
+ collect_langs(sp, s->wData);
+
+ list_for_each_entry(c, &cdev->configs, list) {
+ sp = c->strings;
+ if (sp)
+ collect_langs(sp, s->wData);
+
+ list_for_each_entry(f, &c->functions, list) {
+ sp = f->strings;
+ if (sp)
+ collect_langs(sp, s->wData);
+ }
+ }
+
+ for (len = 0; s->wData[len] && len <= 126; len++)
+ continue;
+ if (!len)
+ return -EINVAL;
+
+ s->bLength = 2 * (len + 1);
+ return s->bLength;
+ }
+
+ /* Otherwise, look up and return a specified string. String IDs
+ * are device-scoped, so we look up each string table we're told
+ * about. These lookups are infrequent; simpler-is-better here.
+ */
+ if (composite->strings) {
+ len = lookup_string(composite->strings, buf, language, id);
+ if (len > 0)
+ return len;
+ }
+ list_for_each_entry(c, &cdev->configs, list) {
+ if (c->strings) {
+ len = lookup_string(c->strings, buf, language, id);
+ if (len > 0)
+ return len;
+ }
+ list_for_each_entry(f, &c->functions, list) {
+ if (!f->strings)
+ continue;
+ len = lookup_string(f->strings, buf, language, id);
+ if (len > 0)
+ return len;
+ }
+ }
+ return -EINVAL;
+}
+
+/**
+ * usb_string_id() - allocate an unused string ID
+ * @cdev: the device whose string descriptor IDs are being allocated
+ * Context: single threaded during gadget setup
+ *
+ * @usb_string_id() is called from bind() callbacks to allocate
+ * string IDs. Drivers for functions, configurations, or gadgets will
+ * then store that ID in the appropriate descriptors and string table.
+ *
+ * All string identifier should be allocated using this routine, to
+ * ensure that for example different functions don't wrongly assign
+ * different meanings to the same identifier.
+ */
+int __init usb_string_id(struct usb_composite_dev *cdev)
+{
+ if (cdev->next_string_id < 254) {
+ /* string id 0 is reserved */
+ cdev->next_string_id++;
+ return cdev->next_string_id;
+ }
+ return -ENODEV;
+}
+
+/*-------------------------------------------------------------------------*/
+
+static void composite_setup_complete(struct usb_ep *ep, struct usb_request *req)
+{
+ if (req->status || req->actual != req->length)
+ DBG((struct usb_composite_dev *) ep->driver_data,
+ "setup complete --> %d, %d/%d\n",
+ req->status, req->actual, req->length);
+}
+
+/*
+ * The setup() callback implements all the ep0 functionality that's
+ * not handled lower down, in hardware or the hardware driver(like
+ * device and endpoint feature flags, and their status). It's all
+ * housekeeping for the gadget function we're implementing. Most of
+ * the work is in config and function specific setup.
+ */
+static int
+composite_setup(struct usb_gadget *gadget, const struct usb_ctrlrequest *ctrl)
+{
+ struct usb_composite_dev *cdev = get_gadget_data(gadget);
+ struct usb_request *req = cdev->req;
+ int value = -EOPNOTSUPP;
+ u16 w_index = le16_to_cpu(ctrl->wIndex);
+ u16 w_value = le16_to_cpu(ctrl->wValue);
+ u16 w_length = le16_to_cpu(ctrl->wLength);
+ struct usb_function *f = NULL;
+
+ /* partial re-init of the response message; the function or the
+ * gadget might need to intercept e.g. a control-OUT completion
+ * when we delegate to it.
+ */
+ req->zero = 0;
+ req->complete = composite_setup_complete;
+ req->length = USB_BUFSIZ;
+ gadget->ep0->driver_data = cdev;
+
+ switch (ctrl->bRequest) {
+
+ /* we handle all standard USB descriptors */
+ case USB_REQ_GET_DESCRIPTOR:
+ if (ctrl->bRequestType != USB_DIR_IN)
+ goto unknown;
+ switch (w_value >> 8) {
+
+ case USB_DT_DEVICE:
+ cdev->desc.bNumConfigurations =
+ count_configs(cdev, USB_DT_DEVICE);
+ value = min(w_length, (u16) sizeof cdev->desc);
+ memcpy(req->buf, &cdev->desc, value);
+ break;
+ case USB_DT_DEVICE_QUALIFIER:
+ if (!gadget_is_dualspeed(gadget))
+ break;
+ device_qual(cdev);
+ value = min_t(int, w_length,
+ sizeof(struct usb_qualifier_descriptor));
+ break;
+ case USB_DT_OTHER_SPEED_CONFIG:
+ if (!gadget_is_dualspeed(gadget))
+ break;
+ /* FALLTHROUGH */
+ case USB_DT_CONFIG:
+ value = config_desc(cdev, w_value);
+ if (value >= 0)
+ value = min(w_length, (u16) value);
+ break;
+ case USB_DT_STRING:
+ value = get_string(cdev, req->buf,
+ w_index, w_value & 0xff);
+ if (value >= 0)
+ value = min(w_length, (u16) value);
+ break;
+ }
+ break;
+
+ /* any number of configs can work */
+ case USB_REQ_SET_CONFIGURATION:
+ if (ctrl->bRequestType != 0)
+ goto unknown;
+ if (gadget_is_otg(gadget)) {
+ if (gadget->a_hnp_support)
+ DBG(cdev, "HNP available\n");
+ else if (gadget->a_alt_hnp_support)
+ DBG(cdev, "HNP on another port\n");
+ else
+ VDBG(cdev, "HNP inactive\n");
+ }
+ spin_lock(&cdev->lock);
+ value = set_config(cdev, ctrl, w_value);
+ spin_unlock(&cdev->lock);
+ break;
+ case USB_REQ_GET_CONFIGURATION:
+ if (ctrl->bRequestType != USB_DIR_IN)
+ goto unknown;
+ if (cdev->config)
+ *(u8 *)req->buf = cdev->config->bConfigurationValue;
+ else
+ *(u8 *)req->buf = 0;
+ value = min(w_length, (u16) 1);
+ break;
+
+ /* function drivers must handle get/set altsetting; if there's
+ * no get() method, we know only altsetting zero works.
+ */
+ case USB_REQ_SET_INTERFACE:
+ if (ctrl->bRequestType != USB_RECIP_INTERFACE)
+ goto unknown;
+ if (!cdev->config || w_index >= MAX_CONFIG_INTERFACES)
+ break;
+ f = cdev->config->interface[w_index];
+ if (!f)
+ break;
+ if (w_value && !f->get_alt)
+ break;
+ value = f->set_alt(f, w_index, w_value);
+ break;
+ case USB_REQ_GET_INTERFACE:
+ if (ctrl->bRequestType != (USB_DIR_IN|USB_RECIP_INTERFACE))
+ goto unknown;
+ if (!cdev->config || w_index >= MAX_CONFIG_INTERFACES)
+ break;
+ f = cdev->config->interface[w_index];
+ if (!f)
+ break;
+ /* lots of interfaces only need altsetting zero... */
+ value = f->get_alt ? f->get_alt(f, w_index) : 0;
+ if (value < 0)
+ break;
+ *((u8 *)req->buf) = value;
+ value = min(w_length, (u16) 1);
+ break;
+ default:
+unknown:
+ VDBG(cdev,
+ "non-core control req%02x.%02x v%04x i%04x l%d\n",
+ ctrl->bRequestType, ctrl->bRequest,
+ w_value, w_index, w_length);
+
+ /* functions always handle their interfaces ... punt other
+ * recipients (endpoint, other, WUSB, ...) to the current
+ * configuration code.
+ *
+ * REVISIT it could make sense to let the composite device
+ * take such requests too, if that's ever needed: to work
+ * in config 0, etc.
+ */
+ if ((ctrl->bRequestType & USB_RECIP_MASK)
+ == USB_RECIP_INTERFACE) {
+ f = cdev->config->interface[w_index];
+ if (f && f->setup)
+ value = f->setup(f, ctrl);
+ else
+ f = NULL;
+ }
+ if (value < 0 && !f) {
+ struct usb_configuration *c;
+
+ c = cdev->config;
+ if (c && c->setup)
+ value = c->setup(c, ctrl);
+ }
+
+ goto done;
+ }
+
+ /* respond with data transfer before status phase? */
+ if (value >= 0) {
+ req->length = value;
+ req->zero = value < w_length;
+ value = usb_ep_queue(gadget->ep0, req, GFP_ATOMIC);
+ if (value < 0) {
+ DBG(cdev, "ep_queue --> %d\n", value);
+ req->status = 0;
+ composite_setup_complete(gadget->ep0, req);
+ }
+ }
+
+done:
+ /* device either stalls (value < 0) or reports success */
+ return value;
+}
+
+static void composite_disconnect(struct usb_gadget *gadget)
+{
+ struct usb_composite_dev *cdev = get_gadget_data(gadget);
+ unsigned long flags;
+
+ /* REVISIT: should we have config and device level
+ * disconnect callbacks?
+ */
+ spin_lock_irqsave(&cdev->lock, flags);
+ if (cdev->config)
+ reset_config(cdev);
+ spin_unlock_irqrestore(&cdev->lock, flags);
+}
+
+/*-------------------------------------------------------------------------*/
+
+static void /* __init_or_exit */
+composite_unbind(struct usb_gadget *gadget)
+{
+ struct usb_composite_dev *cdev = get_gadget_data(gadget);
+
+ /* composite_disconnect() must already have been called
+ * by the underlying peripheral controller driver!
+ * so there's no i/o concurrency that could affect the
+ * state protected by cdev->lock.
+ */
+ WARN_ON(cdev->config);
+
+ while (!list_empty(&cdev->configs)) {
+ struct usb_configuration *c;
+
+ c = list_first_entry(&cdev->configs,
+ struct usb_configuration, list);
+ while (!list_empty(&c->functions)) {
+ struct usb_function *f;
+
+ f = list_first_entry(&c->functions,
+ struct usb_function, list);
+ list_del(&f->list);
+ if (f->unbind) {
+ DBG(cdev, "unbind function '%s'/%p\n",
+ f->name, f);
+ f->unbind(c, f);
+ /* may free memory for "f" */
+ }
+ }
+ list_del(&c->list);
+ if (c->unbind) {
+ DBG(cdev, "unbind config '%s'/%p\n", c->label, c);
+ c->unbind(c);
+ /* may free memory for "c" */
+ }
+ }
+ if (composite->unbind)
+ composite->unbind(cdev);
+
+ if (cdev->req) {
+ kfree(cdev->req->buf);
+ usb_ep_free_request(gadget->ep0, cdev->req);
+ }
+ kfree(cdev);
+ set_gadget_data(gadget, NULL);
+ composite = NULL;
+}
+
+static void __init
+string_override_one(struct usb_gadget_strings *tab, u8 id, const char *s)
+{
+ struct usb_string *str = tab->strings;
+
+ for (str = tab->strings; str->s; str++) {
+ if (str->id == id) {
+ str->s = s;
+ return;
+ }
+ }
+}
+
+static void __init
+string_override(struct usb_gadget_strings **tab, u8 id, const char *s)
+{
+ while (*tab) {
+ string_override_one(*tab, id, s);
+ tab++;
+ }
+}
+
+static int __init composite_bind(struct usb_gadget *gadget)
+{
+ struct usb_composite_dev *cdev;
+ int status = -ENOMEM;
+
+ cdev = kzalloc(sizeof *cdev, GFP_KERNEL);
+ if (!cdev)
+ return status;
+
+ spin_lock_init(&cdev->lock);
+ cdev->gadget = gadget;
+ set_gadget_data(gadget, cdev);
+ INIT_LIST_HEAD(&cdev->configs);
+
+ /* preallocate control response and buffer */
+ cdev->req = usb_ep_alloc_request(gadget->ep0, GFP_KERNEL);
+ if (!cdev->req)
+ goto fail;
+ cdev->req->buf = kmalloc(USB_BUFSIZ, GFP_KERNEL);
+ if (!cdev->req->buf)
+ goto fail;
+ cdev->req->complete = composite_setup_complete;
+ gadget->ep0->driver_data = cdev;
+
+ cdev->bufsiz = USB_BUFSIZ;
+ cdev->driver = composite;
+
+ usb_gadget_set_selfpowered(gadget);
+
+ /* interface and string IDs start at zero via kzalloc.
+ * we force endpoints to start unassigned; few controller
+ * drivers will zero ep->driver_data.
+ */
+ usb_ep_autoconfig_reset(cdev->gadget);
+
+ /* composite gadget needs to assign strings for whole device (like
+ * serial number), register function drivers, potentially update
+ * power state and consumption, etc
+ */
+ status = composite->bind(cdev);
+ if (status < 0)
+ goto fail;
+
+ cdev->desc = *composite->dev;
+ cdev->desc.bMaxPacketSize0 = gadget->ep0->maxpacket;
+
+ /* standardized runtime overrides for device ID data */
+ if (idVendor)
+ cdev->desc.idVendor = cpu_to_le16(idVendor);
+ if (idProduct)
+ cdev->desc.idProduct = cpu_to_le16(idProduct);
+ if (bcdDevice)
+ cdev->desc.bcdDevice = cpu_to_le16(bcdDevice);
+
+ /* strings can't be assigned before bind() allocates the
+ * releavnt identifiers
+ */
+ if (cdev->desc.iManufacturer && iManufacturer)
+ string_override(composite->strings,
+ cdev->desc.iManufacturer, iManufacturer);
+ if (cdev->desc.iProduct && iProduct)
+ string_override(composite->strings,
+ cdev->desc.iProduct, iProduct);
+ if (cdev->desc.iSerialNumber && iSerialNumber)
+ string_override(composite->strings,
+ cdev->desc.iSerialNumber, iSerialNumber);
+
+ INFO(cdev, "%s ready\n", composite->name);
+ return 0;
+
+fail:
+ composite_unbind(gadget);
+ return status;
+}
+
+/*-------------------------------------------------------------------------*/
+
+static void
+composite_suspend(struct usb_gadget *gadget)
+{
+ struct usb_composite_dev *cdev = get_gadget_data(gadget);
+ struct usb_function *f;
+
+ /* REVISIT: should we have config and device level
+ * suspend/resume callbacks?
+ */
+ DBG(cdev, "suspend\n");
+ if (cdev->config) {
+ list_for_each_entry(f, &cdev->config->functions, list) {
+ if (f->suspend)
+ f->suspend(f);
+ }
+ }
+}
+
+static void
+composite_resume(struct usb_gadget *gadget)
+{
+ struct usb_composite_dev *cdev = get_gadget_data(gadget);
+ struct usb_function *f;
+
+ /* REVISIT: should we have config and device level
+ * suspend/resume callbacks?
+ */
+ DBG(cdev, "resume\n");
+ if (cdev->config) {
+ list_for_each_entry(f, &cdev->config->functions, list) {
+ if (f->resume)
+ f->resume(f);
+ }
+ }
+}
+
+/*-------------------------------------------------------------------------*/
+
+static struct usb_gadget_driver composite_driver = {
+ .speed = USB_SPEED_HIGH,
+
+ .bind = composite_bind,
+ .unbind = __exit_p(composite_unbind),
+
+ .setup = composite_setup,
+ .disconnect = composite_disconnect,
+
+ .suspend = composite_suspend,
+ .resume = composite_resume,
+
+ .driver = {
+ .owner = THIS_MODULE,
+ },
+};
+
+/**
+ * usb_composite_register() - register a composite driver
+ * @driver: the driver to register
+ * Context: single threaded during gadget setup
+ *
+ * This function is used to register drivers using the composite driver
+ * framework. The return value is zero, or a negative errno value.
+ * Those values normally come from the driver's @bind method, which does
+ * all the work of setting up the driver to match the hardware.
+ *
+ * On successful return, the gadget is ready to respond to requests from
+ * the host, unless one of its components invokes usb_gadget_disconnect()
+ * while it was binding. That would usually be done in order to wait for
+ * some userspace participation.
+ */
+int __init usb_composite_register(struct usb_composite_driver *driver)
+{
+ if (!driver || !driver->dev || !driver->bind || composite)
+ return -EINVAL;
+
+ if (!driver->name)
+ driver->name = "composite";
+ composite_driver.function = (char *) driver->name;
+ composite_driver.driver.name = driver->name;
+ composite = driver;
+
+ return usb_gadget_register_driver(&composite_driver);
+}
+
+/**
+ * usb_composite_unregister() - unregister a composite driver
+ * @driver: the driver to unregister
+ *
+ * This function is used to unregister drivers using the composite
+ * driver framework.
+ */
+void __exit usb_composite_unregister(struct usb_composite_driver *driver)
+{
+ if (composite != driver)
+ return;
+ usb_gadget_unregister_driver(&composite_driver);
+}
diff --git a/drivers/usb/gadget/config.c b/drivers/usb/gadget/config.c
index a4e54b2743f..1ca1c326392 100644
--- a/drivers/usb/gadget/config.c
+++ b/drivers/usb/gadget/config.c
@@ -96,7 +96,7 @@ int usb_gadget_config_buf(
/* config descriptor first */
if (length < USB_DT_CONFIG_SIZE || !desc)
return -EINVAL;
- *cp = *config;
+ *cp = *config;
/* then interface/endpoint/class/vendor/... */
len = usb_descriptor_fillbuf(USB_DT_CONFIG_SIZE + (u8*)buf,
@@ -115,3 +115,77 @@ int usb_gadget_config_buf(
return len;
}
+/**
+ * usb_copy_descriptors - copy a vector of USB descriptors
+ * @src: null-terminated vector to copy
+ * Context: initialization code, which may sleep
+ *
+ * This makes a copy of a vector of USB descriptors. Its primary use
+ * is to support usb_function objects which can have multiple copies,
+ * each needing different descriptors. Functions may have static
+ * tables of descriptors, which are used as templates and customized
+ * with identifiers (for interfaces, strings, endpoints, and more)
+ * as needed by a given function instance.
+ */
+struct usb_descriptor_header **__init
+usb_copy_descriptors(struct usb_descriptor_header **src)
+{
+ struct usb_descriptor_header **tmp;
+ unsigned bytes;
+ unsigned n_desc;
+ void *mem;
+ struct usb_descriptor_header **ret;
+
+ /* count descriptors and their sizes; then add vector size */
+ for (bytes = 0, n_desc = 0, tmp = src; *tmp; tmp++, n_desc++)
+ bytes += (*tmp)->bLength;
+ bytes += (n_desc + 1) * sizeof(*tmp);
+
+ mem = kmalloc(bytes, GFP_KERNEL);
+ if (!mem)
+ return NULL;
+
+ /* fill in pointers starting at "tmp",
+ * to descriptors copied starting at "mem";
+ * and return "ret"
+ */
+ tmp = mem;
+ ret = mem;
+ mem += (n_desc + 1) * sizeof(*tmp);
+ while (*src) {
+ memcpy(mem, *src, (*src)->bLength);
+ *tmp = mem;
+ tmp++;
+ mem += (*src)->bLength;
+ src++;
+ }
+ *tmp = NULL;
+
+ return ret;
+}
+
+/**
+ * usb_find_endpoint - find a copy of an endpoint descriptor
+ * @src: original vector of descriptors
+ * @copy: copy of @src
+ * @ep: endpoint descriptor found in @src
+ *
+ * This returns the copy of the @match descriptor made for @copy. Its
+ * intended use is to help remembering the endpoint descriptor to use
+ * when enabling a given endpoint.
+ */
+struct usb_endpoint_descriptor *__init
+usb_find_endpoint(
+ struct usb_descriptor_header **src,
+ struct usb_descriptor_header **copy,
+ struct usb_endpoint_descriptor *match
+)
+{
+ while (*src) {
+ if (*src == (void *) match)
+ return (void *)*copy;
+ src++;
+ copy++;
+ }
+ return NULL;
+}
diff --git a/drivers/usb/gadget/dummy_hcd.c b/drivers/usb/gadget/dummy_hcd.c
index 42036192a03..21d1406af9e 100644
--- a/drivers/usb/gadget/dummy_hcd.c
+++ b/drivers/usb/gadget/dummy_hcd.c
@@ -862,7 +862,7 @@ static int dummy_udc_probe (struct platform_device *pdev)
/* maybe claim OTG support, though we won't complete HNP */
dum->gadget.is_otg = (dummy_to_hcd(dum)->self.otg_port != 0);
- strcpy (dum->gadget.dev.bus_id, "gadget");
+ dev_set_name(&dum->gadget.dev, "gadget");
dum->gadget.dev.parent = &pdev->dev;
dum->gadget.dev.release = dummy_gadget_release;
rc = device_register (&dum->gadget.dev);
@@ -1865,7 +1865,7 @@ static int dummy_hcd_probe(struct platform_device *pdev)
dev_info(&pdev->dev, "%s, driver " DRIVER_VERSION "\n", driver_desc);
- hcd = usb_create_hcd(&dummy_hcd, &pdev->dev, pdev->dev.bus_id);
+ hcd = usb_create_hcd(&dummy_hcd, &pdev->dev, dev_name(&pdev->dev));
if (!hcd)
return -ENOMEM;
the_controller = hcd_to_dummy (hcd);
diff --git a/drivers/usb/gadget/epautoconf.c b/drivers/usb/gadget/epautoconf.c
index 8bdad221fa9..9462e30192d 100644
--- a/drivers/usb/gadget/epautoconf.c
+++ b/drivers/usb/gadget/epautoconf.c
@@ -159,6 +159,7 @@ ep_matches (
/* MATCH!! */
/* report address */
+ desc->bEndpointAddress &= USB_DIR_IN;
if (isdigit (ep->name [2])) {
u8 num = simple_strtol (&ep->name [2], NULL, 10);
desc->bEndpointAddress |= num;
diff --git a/drivers/usb/gadget/ether.c b/drivers/usb/gadget/ether.c
index 4ce3950b997..d7aaaa29b1e 100644
--- a/drivers/usb/gadget/ether.c
+++ b/drivers/usb/gadget/ether.c
@@ -1,8 +1,9 @@
/*
* ether.c -- Ethernet gadget driver, with CDC and non-CDC options
*
- * Copyright (C) 2003-2005 David Brownell
+ * Copyright (C) 2003-2005,2008 David Brownell
* Copyright (C) 2003-2004 Robert Schwebel, Benedikt Spranger
+ * Copyright (C) 2008 Nokia Corporation
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
@@ -23,18 +24,9 @@
#include <linux/kernel.h>
#include <linux/utsname.h>
-#include <linux/device.h>
-#include <linux/ctype.h>
-#include <linux/etherdevice.h>
-#include <linux/ethtool.h>
-#include <linux/usb/ch9.h>
-#include <linux/usb/cdc.h>
-#include <linux/usb/gadget.h>
+#include "u_ether.h"
-#include "gadget_chips.h"
-
-/*-------------------------------------------------------------------------*/
/*
* Ethernet gadget driver -- with CDC and non-CDC options
@@ -46,7 +38,11 @@
* this USB-IF standard as its open-systems interoperability solution;
* most host side USB stacks (except from Microsoft) support it.
*
- * There's some hardware that can't talk CDC. We make that hardware
+ * This is sometimes called "CDC ECM" (Ethernet Control Model) to support
+ * TLA-soup. "CDC ACM" (Abstract Control Model) is for modems, and a new
+ * "CDC EEM" (Ethernet Emulation Model) is starting to spread.
+ *
+ * There's some hardware that can't talk CDC ECM. We make that hardware
* implement a "minimalist" vendor-agnostic CDC core: same framing, but
* link-level setup only requires activating the configuration. Only the
* endpoint descriptors, and product/vendor IDs, are relevant; no control
@@ -64,70 +60,40 @@
* A third option is also in use. Rather than CDC Ethernet, or something
* simpler, Microsoft pushes their own approach: RNDIS. The published
* RNDIS specs are ambiguous and appear to be incomplete, and are also
- * needlessly complex.
+ * needlessly complex. They borrow more from CDC ACM than CDC ECM.
*/
#define DRIVER_DESC "Ethernet Gadget"
-#define DRIVER_VERSION "May Day 2005"
-
-static const char shortname [] = "ether";
-static const char driver_desc [] = DRIVER_DESC;
-
-#define RX_EXTRA 20 /* guard against rx overflows */
-
-#include "rndis.h"
+#define DRIVER_VERSION "Memorial Day 2008"
-#ifndef CONFIG_USB_ETH_RNDIS
-#define rndis_uninit(x) do{}while(0)
-#define rndis_deregister(c) do{}while(0)
-#define rndis_exit() do{}while(0)
+#ifdef CONFIG_USB_ETH_RNDIS
+#define PREFIX "RNDIS/"
+#else
+#define PREFIX ""
#endif
-/* CDC and RNDIS support the same host-chosen outgoing packet filters. */
-#define DEFAULT_FILTER (USB_CDC_PACKET_TYPE_BROADCAST \
- |USB_CDC_PACKET_TYPE_ALL_MULTICAST \
- |USB_CDC_PACKET_TYPE_PROMISCUOUS \
- |USB_CDC_PACKET_TYPE_DIRECTED)
-
-
-/*-------------------------------------------------------------------------*/
-
-struct eth_dev {
- spinlock_t lock;
- struct usb_gadget *gadget;
- struct usb_request *req; /* for control responses */
- struct usb_request *stat_req; /* for cdc & rndis status */
-
- u8 config;
- struct usb_ep *in_ep, *out_ep, *status_ep;
- const struct usb_endpoint_descriptor
- *in, *out, *status;
-
- spinlock_t req_lock;
- struct list_head tx_reqs, rx_reqs;
-
- struct net_device *net;
- struct net_device_stats stats;
- atomic_t tx_qlen;
-
- struct work_struct work;
- unsigned zlp:1;
- unsigned cdc:1;
- unsigned rndis:1;
- unsigned suspended:1;
- u16 cdc_filter;
- unsigned long todo;
-#define WORK_RX_MEMORY 0
- int rndis_config;
- u8 host_mac [ETH_ALEN];
-};
-
-/* This version autoconfigures as much as possible at run-time.
+/*
+ * This driver aims for interoperability by using CDC ECM unless
+ *
+ * can_support_ecm()
+ *
+ * returns false, in which case it supports the CDC Subset. By default,
+ * that returns true; most hardware has no problems with CDC ECM, that's
+ * a good default. Previous versions of this driver had no default; this
+ * version changes that, removing overhead for new controller support.
*
- * It also ASSUMES a self-powered device, without remote wakeup,
- * although remote wakeup support would make sense.
+ * IF YOUR HARDWARE CAN'T SUPPORT CDC ECM, UPDATE THAT ROUTINE!
*/
+static inline bool has_rndis(void)
+{
+#ifdef CONFIG_USB_ETH_RNDIS
+ return true;
+#else
+ return false;
+#endif
+}
+
/*-------------------------------------------------------------------------*/
/* DO NOT REUSE THESE IDs with a protocol-incompatible driver!! Ever!!
@@ -137,8 +103,8 @@ struct eth_dev {
/* Thanks to NetChip Technologies for donating this product ID.
* It's for devices with only CDC Ethernet configurations.
*/
-#define CDC_VENDOR_NUM 0x0525 /* NetChip */
-#define CDC_PRODUCT_NUM 0xa4a1 /* Linux-USB Ethernet Gadget */
+#define CDC_VENDOR_NUM 0x0525 /* NetChip */
+#define CDC_PRODUCT_NUM 0xa4a1 /* Linux-USB Ethernet Gadget */
/* For hardware that can't talk CDC, we use the same vendor ID that
* ARM Linux has used for ethernet-over-usb, both with sa1100 and
@@ -162,274 +128,9 @@ struct eth_dev {
#define RNDIS_VENDOR_NUM 0x0525 /* NetChip */
#define RNDIS_PRODUCT_NUM 0xa4a2 /* Ethernet/RNDIS Gadget */
-
-/* Some systems will want different product identifers published in the
- * device descriptor, either numbers or strings or both. These string
- * parameters are in UTF-8 (superset of ASCII's 7 bit characters).
- */
-
-static ushort idVendor;
-module_param(idVendor, ushort, S_IRUGO);
-MODULE_PARM_DESC(idVendor, "USB Vendor ID");
-
-static ushort idProduct;
-module_param(idProduct, ushort, S_IRUGO);
-MODULE_PARM_DESC(idProduct, "USB Product ID");
-
-static ushort bcdDevice;
-module_param(bcdDevice, ushort, S_IRUGO);
-MODULE_PARM_DESC(bcdDevice, "USB Device version (BCD)");
-
-static char *iManufacturer;
-module_param(iManufacturer, charp, S_IRUGO);
-MODULE_PARM_DESC(iManufacturer, "USB Manufacturer string");
-
-static char *iProduct;
-module_param(iProduct, charp, S_IRUGO);
-MODULE_PARM_DESC(iProduct, "USB Product string");
-
-static char *iSerialNumber;
-module_param(iSerialNumber, charp, S_IRUGO);
-MODULE_PARM_DESC(iSerialNumber, "SerialNumber");
-
-/* initial value, changed by "ifconfig usb0 hw ether xx:xx:xx:xx:xx:xx" */
-static char *dev_addr;
-module_param(dev_addr, charp, S_IRUGO);
-MODULE_PARM_DESC(dev_addr, "Device Ethernet Address");
-
-/* this address is invisible to ifconfig */
-static char *host_addr;
-module_param(host_addr, charp, S_IRUGO);
-MODULE_PARM_DESC(host_addr, "Host Ethernet Address");
-
-
-/*-------------------------------------------------------------------------*/
-
-/* Include CDC support if we could run on CDC-capable hardware. */
-
-#ifdef CONFIG_USB_GADGET_NET2280
-#define DEV_CONFIG_CDC
-#endif
-
-#ifdef CONFIG_USB_GADGET_DUMMY_HCD
-#define DEV_CONFIG_CDC
-#endif
-
-#ifdef CONFIG_USB_GADGET_GOKU
-#define DEV_CONFIG_CDC
-#endif
-
-#ifdef CONFIG_USB_GADGET_LH7A40X
-#define DEV_CONFIG_CDC
-#endif
-
-#ifdef CONFIG_USB_GADGET_MQ11XX
-#define DEV_CONFIG_CDC
-#endif
-
-#ifdef CONFIG_USB_GADGET_OMAP
-#define DEV_CONFIG_CDC
-#endif
-
-#ifdef CONFIG_USB_GADGET_N9604
-#define DEV_CONFIG_CDC
-#endif
-
-#ifdef CONFIG_USB_GADGET_S3C2410
-#define DEV_CONFIG_CDC
-#endif
-
-#ifdef CONFIG_USB_GADGET_AT91
-#define DEV_CONFIG_CDC
-#endif
-
-#ifdef CONFIG_USB_GADGET_MUSBHSFC
-#define DEV_CONFIG_CDC
-#endif
-
-#ifdef CONFIG_USB_GADGET_MUSB_HDRC
-#define DEV_CONFIG_CDC
-#endif
-
-#ifdef CONFIG_USB_GADGET_ATMEL_USBA
-#define DEV_CONFIG_CDC
-#endif
-
-#ifdef CONFIG_USB_GADGET_FSL_USB2
-#define DEV_CONFIG_CDC
-#endif
-
-/* For CDC-incapable hardware, choose the simple cdc subset.
- * Anything that talks bulk (without notable bugs) can do this.
- */
-#ifdef CONFIG_USB_GADGET_PXA25X
-#define DEV_CONFIG_SUBSET
-#endif
-
-#ifdef CONFIG_USB_GADGET_PXA27X
-#define DEV_CONFIG_SUBSET
-#endif
-
-#ifdef CONFIG_USB_GADGET_SUPERH
-#define DEV_CONFIG_SUBSET
-#endif
-
-#ifdef CONFIG_USB_GADGET_SA1100
-/* use non-CDC for backwards compatibility */
-#define DEV_CONFIG_SUBSET
-#endif
-
-#ifdef CONFIG_USB_GADGET_M66592
-#define DEV_CONFIG_CDC
-#endif
-
-#ifdef CONFIG_USB_GADGET_AMD5536UDC
-#define DEV_CONFIG_CDC
-#endif
-
-
-/*-------------------------------------------------------------------------*/
-
-/* "main" config is either CDC, or its simple subset */
-static inline int is_cdc(struct eth_dev *dev)
-{
-#if !defined(DEV_CONFIG_SUBSET)
- return 1; /* only cdc possible */
-#elif !defined (DEV_CONFIG_CDC)
- return 0; /* only subset possible */
-#else
- return dev->cdc; /* depends on what hardware we found */
-#endif
-}
-
-/* "secondary" RNDIS config may sometimes be activated */
-static inline int rndis_active(struct eth_dev *dev)
-{
-#ifdef CONFIG_USB_ETH_RNDIS
- return dev->rndis;
-#else
- return 0;
-#endif
-}
-
-#define subset_active(dev) (!is_cdc(dev) && !rndis_active(dev))
-#define cdc_active(dev) ( is_cdc(dev) && !rndis_active(dev))
-
-
-
-#define DEFAULT_QLEN 2 /* double buffering by default */
-
-/* peak bulk transfer bits-per-second */
-#define HS_BPS (13 * 512 * 8 * 1000 * 8)
-#define FS_BPS (19 * 64 * 1 * 1000 * 8)
-
-#ifdef CONFIG_USB_GADGET_DUALSPEED
-#define DEVSPEED USB_SPEED_HIGH
-
-static unsigned qmult = 5;
-module_param (qmult, uint, S_IRUGO|S_IWUSR);
-
-
-/* for dual-speed hardware, use deeper queues at highspeed */
-#define qlen(gadget) \
- (DEFAULT_QLEN*((gadget->speed == USB_SPEED_HIGH) ? qmult : 1))
-
-static inline int BITRATE(struct usb_gadget *g)
-{
- return (g->speed == USB_SPEED_HIGH) ? HS_BPS : FS_BPS;
-}
-
-#else /* full speed (low speed doesn't do bulk) */
-
-#define qmult 1
-
-#define DEVSPEED USB_SPEED_FULL
-
-#define qlen(gadget) DEFAULT_QLEN
-
-static inline int BITRATE(struct usb_gadget *g)
-{
- return FS_BPS;
-}
-#endif
-
-
-/*-------------------------------------------------------------------------*/
-
-#define xprintk(d,level,fmt,args...) \
- printk(level "%s: " fmt , (d)->net->name , ## args)
-
-#ifdef DEBUG
-#undef DEBUG
-#define DEBUG(dev,fmt,args...) \
- xprintk(dev , KERN_DEBUG , fmt , ## args)
-#else
-#define DEBUG(dev,fmt,args...) \
- do { } while (0)
-#endif /* DEBUG */
-
-#ifdef VERBOSE_DEBUG
-#define VDEBUG DEBUG
-#else
-#define VDEBUG(dev,fmt,args...) \
- do { } while (0)
-#endif /* DEBUG */
-
-#define ERROR(dev,fmt,args...) \
- xprintk(dev , KERN_ERR , fmt , ## args)
-#define WARN(dev,fmt,args...) \
- xprintk(dev , KERN_WARNING , fmt , ## args)
-#define INFO(dev,fmt,args...) \
- xprintk(dev , KERN_INFO , fmt , ## args)
-
/*-------------------------------------------------------------------------*/
-/* USB DRIVER HOOKUP (to the hardware driver, below us), mostly
- * ep0 implementation: descriptors, config management, setup().
- * also optional class-specific notification interrupt transfer.
- */
-
-/*
- * DESCRIPTORS ... most are static, but strings and (full) configuration
- * descriptors are built on demand. For now we do either full CDC, or
- * our simple subset, with RNDIS as an optional second configuration.
- *
- * RNDIS includes some CDC ACM descriptors ... like CDC Ethernet. But
- * the class descriptors match a modem (they're ignored; it's really just
- * Ethernet functionality), they don't need the NOP altsetting, and the
- * status transfer endpoint isn't optional.
- */
-
-#define STRING_MANUFACTURER 1
-#define STRING_PRODUCT 2
-#define STRING_ETHADDR 3
-#define STRING_DATA 4
-#define STRING_CONTROL 5
-#define STRING_RNDIS_CONTROL 6
-#define STRING_CDC 7
-#define STRING_SUBSET 8
-#define STRING_RNDIS 9
-#define STRING_SERIALNUMBER 10
-
-/* holds our biggest descriptor (or RNDIS response) */
-#define USB_BUFSIZ 256
-
-/*
- * This device advertises one configuration, eth_config, unless RNDIS
- * is enabled (rndis_config) on hardware supporting at least two configs.
- *
- * NOTE: Controllers like superh_udc should probably be able to use
- * an RNDIS-only configuration.
- *
- * FIXME define some higher-powered configurations to make it easier
- * to recharge batteries ...
- */
-
-#define DEV_CONFIG_VALUE 1 /* cdc or subset */
-#define DEV_RNDIS_CONFIG_VALUE 2 /* rndis; optional */
-
-static struct usb_device_descriptor
-device_desc = {
+static struct usb_device_descriptor device_desc = {
.bLength = sizeof device_desc,
.bDescriptorType = USB_DT_DEVICE,
@@ -438,2220 +139,234 @@ device_desc = {
.bDeviceClass = USB_CLASS_COMM,
.bDeviceSubClass = 0,
.bDeviceProtocol = 0,
+ /* .bMaxPacketSize0 = f(hardware) */
+ /* Vendor and product id defaults change according to what configs
+ * we support. (As does bNumConfigurations.) These values can
+ * also be overridden by module parameters.
+ */
.idVendor = __constant_cpu_to_le16 (CDC_VENDOR_NUM),
.idProduct = __constant_cpu_to_le16 (CDC_PRODUCT_NUM),
- .iManufacturer = STRING_MANUFACTURER,
- .iProduct = STRING_PRODUCT,
+ /* .bcdDevice = f(hardware) */
+ /* .iManufacturer = DYNAMIC */
+ /* .iProduct = DYNAMIC */
+ /* NO SERIAL NUMBER */
.bNumConfigurations = 1,
};
-static struct usb_otg_descriptor
-otg_descriptor = {
+static struct usb_otg_descriptor otg_descriptor = {
.bLength = sizeof otg_descriptor,
.bDescriptorType = USB_DT_OTG,
- .bmAttributes = USB_OTG_SRP,
-};
-
-static struct usb_config_descriptor
-eth_config = {
- .bLength = sizeof eth_config,
- .bDescriptorType = USB_DT_CONFIG,
-
- /* compute wTotalLength on the fly */
- .bNumInterfaces = 2,
- .bConfigurationValue = DEV_CONFIG_VALUE,
- .iConfiguration = STRING_CDC,
- .bmAttributes = USB_CONFIG_ATT_ONE | USB_CONFIG_ATT_SELFPOWER,
- .bMaxPower = 50,
-};
-
-#ifdef CONFIG_USB_ETH_RNDIS
-static struct usb_config_descriptor
-rndis_config = {
- .bLength = sizeof rndis_config,
- .bDescriptorType = USB_DT_CONFIG,
-
- /* compute wTotalLength on the fly */
- .bNumInterfaces = 2,
- .bConfigurationValue = DEV_RNDIS_CONFIG_VALUE,
- .iConfiguration = STRING_RNDIS,
- .bmAttributes = USB_CONFIG_ATT_ONE | USB_CONFIG_ATT_SELFPOWER,
- .bMaxPower = 50,
-};
-#endif
-
-/*
- * Compared to the simple CDC subset, the full CDC Ethernet model adds
- * three class descriptors, two interface descriptors, optional status
- * endpoint. Both have a "data" interface and two bulk endpoints.
- * There are also differences in how control requests are handled.
- *
- * RNDIS shares a lot with CDC-Ethernet, since it's a variant of the
- * CDC-ACM (modem) spec. Unfortunately MSFT's RNDIS driver is buggy; it
- * may hang or oops. Since bugfixes (or accurate specs, letting Linux
- * work around those bugs) are unlikely to ever come from MSFT, you may
- * wish to avoid using RNDIS.
- *
- * MCCI offers an alternative to RNDIS if you need to connect to Windows
- * but have hardware that can't support CDC Ethernet. We add descriptors
- * to present the CDC Subset as a (nonconformant) CDC MDLM variant called
- * "SAFE". That borrows from both CDC Ethernet and CDC MDLM. You can
- * get those drivers from MCCI, or bundled with various products.
- */
-
-#ifdef DEV_CONFIG_CDC
-static struct usb_interface_descriptor
-control_intf = {
- .bLength = sizeof control_intf,
- .bDescriptorType = USB_DT_INTERFACE,
-
- .bInterfaceNumber = 0,
- /* status endpoint is optional; this may be patched later */
- .bNumEndpoints = 1,
- .bInterfaceClass = USB_CLASS_COMM,
- .bInterfaceSubClass = USB_CDC_SUBCLASS_ETHERNET,
- .bInterfaceProtocol = USB_CDC_PROTO_NONE,
- .iInterface = STRING_CONTROL,
-};
-#endif
-
-#ifdef CONFIG_USB_ETH_RNDIS
-static const struct usb_interface_descriptor
-rndis_control_intf = {
- .bLength = sizeof rndis_control_intf,
- .bDescriptorType = USB_DT_INTERFACE,
-
- .bInterfaceNumber = 0,
- .bNumEndpoints = 1,
- .bInterfaceClass = USB_CLASS_COMM,
- .bInterfaceSubClass = USB_CDC_SUBCLASS_ACM,
- .bInterfaceProtocol = USB_CDC_ACM_PROTO_VENDOR,
- .iInterface = STRING_RNDIS_CONTROL,
-};
-#endif
-
-static const struct usb_cdc_header_desc header_desc = {
- .bLength = sizeof header_desc,
- .bDescriptorType = USB_DT_CS_INTERFACE,
- .bDescriptorSubType = USB_CDC_HEADER_TYPE,
-
- .bcdCDC = __constant_cpu_to_le16 (0x0110),
-};
-
-#if defined(DEV_CONFIG_CDC) || defined(CONFIG_USB_ETH_RNDIS)
-
-static const struct usb_cdc_union_desc union_desc = {
- .bLength = sizeof union_desc,
- .bDescriptorType = USB_DT_CS_INTERFACE,
- .bDescriptorSubType = USB_CDC_UNION_TYPE,
-
- .bMasterInterface0 = 0, /* index of control interface */
- .bSlaveInterface0 = 1, /* index of DATA interface */
-};
-
-#endif /* CDC || RNDIS */
-
-#ifdef CONFIG_USB_ETH_RNDIS
-
-static const struct usb_cdc_call_mgmt_descriptor call_mgmt_descriptor = {
- .bLength = sizeof call_mgmt_descriptor,
- .bDescriptorType = USB_DT_CS_INTERFACE,
- .bDescriptorSubType = USB_CDC_CALL_MANAGEMENT_TYPE,
-
- .bmCapabilities = 0x00,
- .bDataInterface = 0x01,
-};
-
-static const struct usb_cdc_acm_descriptor acm_descriptor = {
- .bLength = sizeof acm_descriptor,
- .bDescriptorType = USB_DT_CS_INTERFACE,
- .bDescriptorSubType = USB_CDC_ACM_TYPE,
-
- .bmCapabilities = 0x00,
-};
-
-#endif
-
-#ifndef DEV_CONFIG_CDC
-
-/* "SAFE" loosely follows CDC WMC MDLM, violating the spec in various
- * ways: data endpoints live in the control interface, there's no data
- * interface, and it's not used to talk to a cell phone radio.
- */
-
-static const struct usb_cdc_mdlm_desc mdlm_desc = {
- .bLength = sizeof mdlm_desc,
- .bDescriptorType = USB_DT_CS_INTERFACE,
- .bDescriptorSubType = USB_CDC_MDLM_TYPE,
-
- .bcdVersion = __constant_cpu_to_le16(0x0100),
- .bGUID = {
- 0x5d, 0x34, 0xcf, 0x66, 0x11, 0x18, 0x11, 0xd6,
- 0xa2, 0x1a, 0x00, 0x01, 0x02, 0xca, 0x9a, 0x7f,
- },
-};
-
-/* since "usb_cdc_mdlm_detail_desc" is a variable length structure, we
- * can't really use its struct. All we do here is say that we're using
- * the submode of "SAFE" which directly matches the CDC Subset.
- */
-static const u8 mdlm_detail_desc[] = {
- 6,
- USB_DT_CS_INTERFACE,
- USB_CDC_MDLM_DETAIL_TYPE,
-
- 0, /* "SAFE" */
- 0, /* network control capabilities (none) */
- 0, /* network data capabilities ("raw" encapsulation) */
-};
-
-#endif
-
-static const struct usb_cdc_ether_desc ether_desc = {
- .bLength = sizeof ether_desc,
- .bDescriptorType = USB_DT_CS_INTERFACE,
- .bDescriptorSubType = USB_CDC_ETHERNET_TYPE,
-
- /* this descriptor actually adds value, surprise! */
- .iMACAddress = STRING_ETHADDR,
- .bmEthernetStatistics = __constant_cpu_to_le32 (0), /* no statistics */
- .wMaxSegmentSize = __constant_cpu_to_le16 (ETH_FRAME_LEN),
- .wNumberMCFilters = __constant_cpu_to_le16 (0),
- .bNumberPowerFilters = 0,
-};
-
-
-#if defined(DEV_CONFIG_CDC) || defined(CONFIG_USB_ETH_RNDIS)
-
-/* include the status endpoint if we can, even where it's optional.
- * use wMaxPacketSize big enough to fit CDC_NOTIFY_SPEED_CHANGE in one
- * packet, to simplify cancellation; and a big transfer interval, to
- * waste less bandwidth.
- *
- * some drivers (like Linux 2.4 cdc-ether!) "need" it to exist even
- * if they ignore the connect/disconnect notifications that real aether
- * can provide. more advanced cdc configurations might want to support
- * encapsulated commands (vendor-specific, using control-OUT).
- *
- * RNDIS requires the status endpoint, since it uses that encapsulation
- * mechanism for its funky RPC scheme.
- */
-
-#define LOG2_STATUS_INTERVAL_MSEC 5 /* 1 << 5 == 32 msec */
-#define STATUS_BYTECOUNT 16 /* 8 byte header + data */
-
-static struct usb_endpoint_descriptor
-fs_status_desc = {
- .bLength = USB_DT_ENDPOINT_SIZE,
- .bDescriptorType = USB_DT_ENDPOINT,
-
- .bEndpointAddress = USB_DIR_IN,
- .bmAttributes = USB_ENDPOINT_XFER_INT,
- .wMaxPacketSize = __constant_cpu_to_le16 (STATUS_BYTECOUNT),
- .bInterval = 1 << LOG2_STATUS_INTERVAL_MSEC,
-};
-#endif
-
-#ifdef DEV_CONFIG_CDC
-
-/* the default data interface has no endpoints ... */
-
-static const struct usb_interface_descriptor
-data_nop_intf = {
- .bLength = sizeof data_nop_intf,
- .bDescriptorType = USB_DT_INTERFACE,
-
- .bInterfaceNumber = 1,
- .bAlternateSetting = 0,
- .bNumEndpoints = 0,
- .bInterfaceClass = USB_CLASS_CDC_DATA,
- .bInterfaceSubClass = 0,
- .bInterfaceProtocol = 0,
-};
-
-/* ... but the "real" data interface has two bulk endpoints */
-
-static const struct usb_interface_descriptor
-data_intf = {
- .bLength = sizeof data_intf,
- .bDescriptorType = USB_DT_INTERFACE,
-
- .bInterfaceNumber = 1,
- .bAlternateSetting = 1,
- .bNumEndpoints = 2,
- .bInterfaceClass = USB_CLASS_CDC_DATA,
- .bInterfaceSubClass = 0,
- .bInterfaceProtocol = 0,
- .iInterface = STRING_DATA,
-};
-
-#endif
-
-#ifdef CONFIG_USB_ETH_RNDIS
-
-/* RNDIS doesn't activate by changing to the "real" altsetting */
-
-static const struct usb_interface_descriptor
-rndis_data_intf = {
- .bLength = sizeof rndis_data_intf,
- .bDescriptorType = USB_DT_INTERFACE,
-
- .bInterfaceNumber = 1,
- .bAlternateSetting = 0,
- .bNumEndpoints = 2,
- .bInterfaceClass = USB_CLASS_CDC_DATA,
- .bInterfaceSubClass = 0,
- .bInterfaceProtocol = 0,
- .iInterface = STRING_DATA,
-};
-
-#endif
-
-#ifdef DEV_CONFIG_SUBSET
-
-/*
- * "Simple" CDC-subset option is a simple vendor-neutral model that most
- * full speed controllers can handle: one interface, two bulk endpoints.
- *
- * To assist host side drivers, we fancy it up a bit, and add descriptors
- * so some host side drivers will understand it as a "SAFE" variant.
- */
-
-static const struct usb_interface_descriptor
-subset_data_intf = {
- .bLength = sizeof subset_data_intf,
- .bDescriptorType = USB_DT_INTERFACE,
-
- .bInterfaceNumber = 0,
- .bAlternateSetting = 0,
- .bNumEndpoints = 2,
- .bInterfaceClass = USB_CLASS_COMM,
- .bInterfaceSubClass = USB_CDC_SUBCLASS_MDLM,
- .bInterfaceProtocol = 0,
- .iInterface = STRING_DATA,
-};
-
-#endif /* SUBSET */
-
-
-static struct usb_endpoint_descriptor
-fs_source_desc = {
- .bLength = USB_DT_ENDPOINT_SIZE,
- .bDescriptorType = USB_DT_ENDPOINT,
-
- .bEndpointAddress = USB_DIR_IN,
- .bmAttributes = USB_ENDPOINT_XFER_BULK,
-};
-
-static struct usb_endpoint_descriptor
-fs_sink_desc = {
- .bLength = USB_DT_ENDPOINT_SIZE,
- .bDescriptorType = USB_DT_ENDPOINT,
-
- .bEndpointAddress = USB_DIR_OUT,
- .bmAttributes = USB_ENDPOINT_XFER_BULK,
+ /* REVISIT SRP-only hardware is possible, although
+ * it would not be called "OTG" ...
+ */
+ .bmAttributes = USB_OTG_SRP | USB_OTG_HNP,
};
-static const struct usb_descriptor_header *fs_eth_function [11] = {
+static const struct usb_descriptor_header *otg_desc[] = {
(struct usb_descriptor_header *) &otg_descriptor,
-#ifdef DEV_CONFIG_CDC
- /* "cdc" mode descriptors */
- (struct usb_descriptor_header *) &control_intf,
- (struct usb_descriptor_header *) &header_desc,
- (struct usb_descriptor_header *) &union_desc,
- (struct usb_descriptor_header *) &ether_desc,
- /* NOTE: status endpoint may need to be removed */
- (struct usb_descriptor_header *) &fs_status_desc,
- /* data interface, with altsetting */
- (struct usb_descriptor_header *) &data_nop_intf,
- (struct usb_descriptor_header *) &data_intf,
- (struct usb_descriptor_header *) &fs_source_desc,
- (struct usb_descriptor_header *) &fs_sink_desc,
NULL,
-#endif /* DEV_CONFIG_CDC */
};
-static inline void __init fs_subset_descriptors(void)
-{
-#ifdef DEV_CONFIG_SUBSET
- /* behavior is "CDC Subset"; extra descriptors say "SAFE" */
- fs_eth_function[1] = (struct usb_descriptor_header *) &subset_data_intf;
- fs_eth_function[2] = (struct usb_descriptor_header *) &header_desc;
- fs_eth_function[3] = (struct usb_descriptor_header *) &mdlm_desc;
- fs_eth_function[4] = (struct usb_descriptor_header *) &mdlm_detail_desc;
- fs_eth_function[5] = (struct usb_descriptor_header *) &ether_desc;
- fs_eth_function[6] = (struct usb_descriptor_header *) &fs_source_desc;
- fs_eth_function[7] = (struct usb_descriptor_header *) &fs_sink_desc;
- fs_eth_function[8] = NULL;
-#else
- fs_eth_function[1] = NULL;
-#endif
-}
-#ifdef CONFIG_USB_ETH_RNDIS
-static const struct usb_descriptor_header *fs_rndis_function [] = {
- (struct usb_descriptor_header *) &otg_descriptor,
- /* control interface matches ACM, not Ethernet */
- (struct usb_descriptor_header *) &rndis_control_intf,
- (struct usb_descriptor_header *) &header_desc,
- (struct usb_descriptor_header *) &call_mgmt_descriptor,
- (struct usb_descriptor_header *) &acm_descriptor,
- (struct usb_descriptor_header *) &union_desc,
- (struct usb_descriptor_header *) &fs_status_desc,
- /* data interface has no altsetting */
- (struct usb_descriptor_header *) &rndis_data_intf,
- (struct usb_descriptor_header *) &fs_source_desc,
- (struct usb_descriptor_header *) &fs_sink_desc,
- NULL,
-};
-#endif
-
-/*
- * usb 2.0 devices need to expose both high speed and full speed
- * descriptors, unless they only run at full speed.
- */
-
-#if defined(DEV_CONFIG_CDC) || defined(CONFIG_USB_ETH_RNDIS)
-static struct usb_endpoint_descriptor
-hs_status_desc = {
- .bLength = USB_DT_ENDPOINT_SIZE,
- .bDescriptorType = USB_DT_ENDPOINT,
-
- .bmAttributes = USB_ENDPOINT_XFER_INT,
- .wMaxPacketSize = __constant_cpu_to_le16 (STATUS_BYTECOUNT),
- .bInterval = LOG2_STATUS_INTERVAL_MSEC + 4,
-};
-#endif /* DEV_CONFIG_CDC */
-
-static struct usb_endpoint_descriptor
-hs_source_desc = {
- .bLength = USB_DT_ENDPOINT_SIZE,
- .bDescriptorType = USB_DT_ENDPOINT,
-
- .bmAttributes = USB_ENDPOINT_XFER_BULK,
- .wMaxPacketSize = __constant_cpu_to_le16 (512),
-};
-
-static struct usb_endpoint_descriptor
-hs_sink_desc = {
- .bLength = USB_DT_ENDPOINT_SIZE,
- .bDescriptorType = USB_DT_ENDPOINT,
-
- .bmAttributes = USB_ENDPOINT_XFER_BULK,
- .wMaxPacketSize = __constant_cpu_to_le16 (512),
-};
+/* string IDs are assigned dynamically */
-static struct usb_qualifier_descriptor
-dev_qualifier = {
- .bLength = sizeof dev_qualifier,
- .bDescriptorType = USB_DT_DEVICE_QUALIFIER,
+#define STRING_MANUFACTURER_IDX 0
+#define STRING_PRODUCT_IDX 1
- .bcdUSB = __constant_cpu_to_le16 (0x0200),
- .bDeviceClass = USB_CLASS_COMM,
+static char manufacturer[50];
- .bNumConfigurations = 1,
+static struct usb_string strings_dev[] = {
+ [STRING_MANUFACTURER_IDX].s = manufacturer,
+ [STRING_PRODUCT_IDX].s = PREFIX DRIVER_DESC,
+ { } /* end of list */
};
-static const struct usb_descriptor_header *hs_eth_function [11] = {
- (struct usb_descriptor_header *) &otg_descriptor,
-#ifdef DEV_CONFIG_CDC
- /* "cdc" mode descriptors */
- (struct usb_descriptor_header *) &control_intf,
- (struct usb_descriptor_header *) &header_desc,
- (struct usb_descriptor_header *) &union_desc,
- (struct usb_descriptor_header *) &ether_desc,
- /* NOTE: status endpoint may need to be removed */
- (struct usb_descriptor_header *) &hs_status_desc,
- /* data interface, with altsetting */
- (struct usb_descriptor_header *) &data_nop_intf,
- (struct usb_descriptor_header *) &data_intf,
- (struct usb_descriptor_header *) &hs_source_desc,
- (struct usb_descriptor_header *) &hs_sink_desc,
- NULL,
-#endif /* DEV_CONFIG_CDC */
+static struct usb_gadget_strings stringtab_dev = {
+ .language = 0x0409, /* en-us */
+ .strings = strings_dev,
};
-static inline void __init hs_subset_descriptors(void)
-{
-#ifdef DEV_CONFIG_SUBSET
- /* behavior is "CDC Subset"; extra descriptors say "SAFE" */
- hs_eth_function[1] = (struct usb_descriptor_header *) &subset_data_intf;
- hs_eth_function[2] = (struct usb_descriptor_header *) &header_desc;
- hs_eth_function[3] = (struct usb_descriptor_header *) &mdlm_desc;
- hs_eth_function[4] = (struct usb_descriptor_header *) &mdlm_detail_desc;
- hs_eth_function[5] = (struct usb_descriptor_header *) &ether_desc;
- hs_eth_function[6] = (struct usb_descriptor_header *) &hs_source_desc;
- hs_eth_function[7] = (struct usb_descriptor_header *) &hs_sink_desc;
- hs_eth_function[8] = NULL;
-#else
- hs_eth_function[1] = NULL;
-#endif
-}
-
-#ifdef CONFIG_USB_ETH_RNDIS
-static const struct usb_descriptor_header *hs_rndis_function [] = {
- (struct usb_descriptor_header *) &otg_descriptor,
- /* control interface matches ACM, not Ethernet */
- (struct usb_descriptor_header *) &rndis_control_intf,
- (struct usb_descriptor_header *) &header_desc,
- (struct usb_descriptor_header *) &call_mgmt_descriptor,
- (struct usb_descriptor_header *) &acm_descriptor,
- (struct usb_descriptor_header *) &union_desc,
- (struct usb_descriptor_header *) &hs_status_desc,
- /* data interface has no altsetting */
- (struct usb_descriptor_header *) &rndis_data_intf,
- (struct usb_descriptor_header *) &hs_source_desc,
- (struct usb_descriptor_header *) &hs_sink_desc,
+static struct usb_gadget_strings *dev_strings[] = {
+ &stringtab_dev,
NULL,
};
-#endif
-
-
-/* maxpacket and other transfer characteristics vary by speed. */
-static inline struct usb_endpoint_descriptor *
-ep_desc(struct usb_gadget *g, struct usb_endpoint_descriptor *hs,
- struct usb_endpoint_descriptor *fs)
-{
- if (gadget_is_dualspeed(g) && g->speed == USB_SPEED_HIGH)
- return hs;
- return fs;
-}
+static u8 hostaddr[ETH_ALEN];
/*-------------------------------------------------------------------------*/
-/* descriptors that are built on-demand */
-
-static char manufacturer [50];
-static char product_desc [40] = DRIVER_DESC;
-static char serial_number [20];
-
-/* address that the host will use ... usually assigned at random */
-static char ethaddr [2 * ETH_ALEN + 1];
-
-/* static strings, in UTF-8 */
-static struct usb_string strings [] = {
- { STRING_MANUFACTURER, manufacturer, },
- { STRING_PRODUCT, product_desc, },
- { STRING_SERIALNUMBER, serial_number, },
- { STRING_DATA, "Ethernet Data", },
- { STRING_ETHADDR, ethaddr, },
-#ifdef DEV_CONFIG_CDC
- { STRING_CDC, "CDC Ethernet", },
- { STRING_CONTROL, "CDC Communications Control", },
-#endif
-#ifdef DEV_CONFIG_SUBSET
- { STRING_SUBSET, "CDC Ethernet Subset", },
-#endif
-#ifdef CONFIG_USB_ETH_RNDIS
- { STRING_RNDIS, "RNDIS", },
- { STRING_RNDIS_CONTROL, "RNDIS Communications Control", },
-#endif
- { } /* end of list */
-};
-
-static struct usb_gadget_strings stringtab = {
- .language = 0x0409, /* en-us */
- .strings = strings,
-};
-
/*
- * one config, two interfaces: control, data.
- * complications: class descriptors, and an altsetting.
- */
-static int
-config_buf(struct usb_gadget *g, u8 *buf, u8 type, unsigned index, int is_otg)
-{
- int len;
- const struct usb_config_descriptor *config;
- const struct usb_descriptor_header **function;
- int hs = 0;
-
- if (gadget_is_dualspeed(g)) {
- hs = (g->speed == USB_SPEED_HIGH);
- if (type == USB_DT_OTHER_SPEED_CONFIG)
- hs = !hs;
- }
-#define which_fn(t) (hs ? hs_ ## t ## _function : fs_ ## t ## _function)
-
- if (index >= device_desc.bNumConfigurations)
- return -EINVAL;
-
-#ifdef CONFIG_USB_ETH_RNDIS
- /* list the RNDIS config first, to make Microsoft's drivers
- * happy. DOCSIS 1.0 needs this too.
- */
- if (device_desc.bNumConfigurations == 2 && index == 0) {
- config = &rndis_config;
- function = which_fn (rndis);
- } else
-#endif
- {
- config = &eth_config;
- function = which_fn (eth);
- }
-
- /* for now, don't advertise srp-only devices */
- if (!is_otg)
- function++;
-
- len = usb_gadget_config_buf (config, buf, USB_BUFSIZ, function);
- if (len < 0)
- return len;
- ((struct usb_config_descriptor *) buf)->bDescriptorType = type;
- return len;
-}
-
-/*-------------------------------------------------------------------------*/
-
-static void eth_start (struct eth_dev *dev, gfp_t gfp_flags);
-static int alloc_requests (struct eth_dev *dev, unsigned n, gfp_t gfp_flags);
-
-static int
-set_ether_config (struct eth_dev *dev, gfp_t gfp_flags)
-{
- int result = 0;
- struct usb_gadget *gadget = dev->gadget;
-
-#if defined(DEV_CONFIG_CDC) || defined(CONFIG_USB_ETH_RNDIS)
- /* status endpoint used for RNDIS and (optionally) CDC */
- if (!subset_active(dev) && dev->status_ep) {
- dev->status = ep_desc (gadget, &hs_status_desc,
- &fs_status_desc);
- dev->status_ep->driver_data = dev;
-
- result = usb_ep_enable (dev->status_ep, dev->status);
- if (result != 0) {
- DEBUG (dev, "enable %s --> %d\n",
- dev->status_ep->name, result);
- goto done;
- }
- }
-#endif
-
- dev->in = ep_desc(gadget, &hs_source_desc, &fs_source_desc);
- dev->in_ep->driver_data = dev;
-
- dev->out = ep_desc(gadget, &hs_sink_desc, &fs_sink_desc);
- dev->out_ep->driver_data = dev;
-
- /* With CDC, the host isn't allowed to use these two data
- * endpoints in the default altsetting for the interface.
- * so we don't activate them yet. Reset from SET_INTERFACE.
- *
- * Strictly speaking RNDIS should work the same: activation is
- * a side effect of setting a packet filter. Deactivation is
- * from REMOTE_NDIS_HALT_MSG, reset from REMOTE_NDIS_RESET_MSG.
- */
- if (!cdc_active(dev)) {
- result = usb_ep_enable (dev->in_ep, dev->in);
- if (result != 0) {
- DEBUG(dev, "enable %s --> %d\n",
- dev->in_ep->name, result);
- goto done;
- }
-
- result = usb_ep_enable (dev->out_ep, dev->out);
- if (result != 0) {
- DEBUG (dev, "enable %s --> %d\n",
- dev->out_ep->name, result);
- goto done;
- }
- }
-
-done:
- if (result == 0)
- result = alloc_requests (dev, qlen (gadget), gfp_flags);
-
- /* on error, disable any endpoints */
- if (result < 0) {
- if (!subset_active(dev) && dev->status_ep)
- (void) usb_ep_disable (dev->status_ep);
- dev->status = NULL;
- (void) usb_ep_disable (dev->in_ep);
- (void) usb_ep_disable (dev->out_ep);
- dev->in = NULL;
- dev->out = NULL;
- }
-
- /* activate non-CDC configs right away
- * this isn't strictly according to the RNDIS spec
- */
- else if (!cdc_active (dev)) {
- netif_carrier_on (dev->net);
- if (netif_running (dev->net)) {
- spin_unlock (&dev->lock);
- eth_start (dev, GFP_ATOMIC);
- spin_lock (&dev->lock);
- }
- }
-
- if (result == 0)
- DEBUG (dev, "qlen %d\n", qlen (gadget));
-
- /* caller is responsible for cleanup on error */
- return result;
-}
-
-static void eth_reset_config (struct eth_dev *dev)
-{
- struct usb_request *req;
-
- if (dev->config == 0)
- return;
-
- DEBUG (dev, "%s\n", __func__);
-
- netif_stop_queue (dev->net);
- netif_carrier_off (dev->net);
- rndis_uninit(dev->rndis_config);
-
- /* disable endpoints, forcing (synchronous) completion of
- * pending i/o. then free the requests.
- */
- if (dev->in) {
- usb_ep_disable (dev->in_ep);
- spin_lock(&dev->req_lock);
- while (likely (!list_empty (&dev->tx_reqs))) {
- req = container_of (dev->tx_reqs.next,
- struct usb_request, list);
- list_del (&req->list);
-
- spin_unlock(&dev->req_lock);
- usb_ep_free_request (dev->in_ep, req);
- spin_lock(&dev->req_lock);
- }
- spin_unlock(&dev->req_lock);
- }
- if (dev->out) {
- usb_ep_disable (dev->out_ep);
- spin_lock(&dev->req_lock);
- while (likely (!list_empty (&dev->rx_reqs))) {
- req = container_of (dev->rx_reqs.next,
- struct usb_request, list);
- list_del (&req->list);
-
- spin_unlock(&dev->req_lock);
- usb_ep_free_request (dev->out_ep, req);
- spin_lock(&dev->req_lock);
- }
- spin_unlock(&dev->req_lock);
- }
-
- if (dev->status) {
- usb_ep_disable (dev->status_ep);
- }
- dev->rndis = 0;
- dev->cdc_filter = 0;
- dev->config = 0;
-}
-
-/* change our operational config. must agree with the code
- * that returns config descriptors, and altsetting code.
+ * We may not have an RNDIS configuration, but if we do it needs to be
+ * the first one present. That's to make Microsoft's drivers happy,
+ * and to follow DOCSIS 1.0 (cable modem standard).
*/
-static int
-eth_set_config (struct eth_dev *dev, unsigned number, gfp_t gfp_flags)
+static int __init rndis_do_config(struct usb_configuration *c)
{
- int result = 0;
- struct usb_gadget *gadget = dev->gadget;
-
- if (gadget_is_sa1100 (gadget)
- && dev->config
- && atomic_read (&dev->tx_qlen) != 0) {
- /* tx fifo is full, but we can't clear it...*/
- INFO (dev, "can't change configurations\n");
- return -ESPIPE;
- }
- eth_reset_config (dev);
-
- switch (number) {
- case DEV_CONFIG_VALUE:
- result = set_ether_config (dev, gfp_flags);
- break;
-#ifdef CONFIG_USB_ETH_RNDIS
- case DEV_RNDIS_CONFIG_VALUE:
- dev->rndis = 1;
- result = set_ether_config (dev, gfp_flags);
- break;
-#endif
- default:
- result = -EINVAL;
- /* FALL THROUGH */
- case 0:
- break;
- }
-
- if (result) {
- if (number)
- eth_reset_config (dev);
- usb_gadget_vbus_draw(dev->gadget,
- gadget_is_otg(dev->gadget) ? 8 : 100);
- } else {
- char *speed;
- unsigned power;
-
- power = 2 * eth_config.bMaxPower;
- usb_gadget_vbus_draw(dev->gadget, power);
+ /* FIXME alloc iConfiguration string, set it in c->strings */
- switch (gadget->speed) {
- case USB_SPEED_FULL: speed = "full"; break;
-#ifdef CONFIG_USB_GADGET_DUALSPEED
- case USB_SPEED_HIGH: speed = "high"; break;
-#endif
- default: speed = "?"; break;
- }
-
- dev->config = number;
- INFO (dev, "%s speed config #%d: %d mA, %s, using %s\n",
- speed, number, power, driver_desc,
- rndis_active(dev)
- ? "RNDIS"
- : (cdc_active(dev)
- ? "CDC Ethernet"
- : "CDC Ethernet Subset"));
+ if (gadget_is_otg(c->cdev->gadget)) {
+ c->descriptors = otg_desc;
+ c->bmAttributes |= USB_CONFIG_ATT_WAKEUP;
}
- return result;
-}
-
-/*-------------------------------------------------------------------------*/
-
-#ifdef DEV_CONFIG_CDC
-/* The interrupt endpoint is used in CDC networking models (Ethernet, ATM)
- * only to notify the host about link status changes (which we support) or
- * report completion of some encapsulated command (as used in RNDIS). Since
- * we want this CDC Ethernet code to be vendor-neutral, we don't use that
- * command mechanism; and only one status request is ever queued.
- */
-
-static void eth_status_complete (struct usb_ep *ep, struct usb_request *req)
-{
- struct usb_cdc_notification *event = req->buf;
- int value = req->status;
- struct eth_dev *dev = ep->driver_data;
-
- /* issue the second notification if host reads the first */
- if (event->bNotificationType == USB_CDC_NOTIFY_NETWORK_CONNECTION
- && value == 0) {
- __le32 *data = req->buf + sizeof *event;
-
- event->bmRequestType = 0xA1;
- event->bNotificationType = USB_CDC_NOTIFY_SPEED_CHANGE;
- event->wValue = __constant_cpu_to_le16 (0);
- event->wIndex = __constant_cpu_to_le16 (1);
- event->wLength = __constant_cpu_to_le16 (8);
-
- /* SPEED_CHANGE data is up/down speeds in bits/sec */
- data [0] = data [1] = cpu_to_le32 (BITRATE (dev->gadget));
-
- req->length = STATUS_BYTECOUNT;
- value = usb_ep_queue (ep, req, GFP_ATOMIC);
- DEBUG (dev, "send SPEED_CHANGE --> %d\n", value);
- if (value == 0)
- return;
- } else if (value != -ECONNRESET)
- DEBUG (dev, "event %02x --> %d\n",
- event->bNotificationType, value);
- req->context = NULL;
+ return rndis_bind_config(c, hostaddr);
}
-static void issue_start_status (struct eth_dev *dev)
-{
- struct usb_request *req = dev->stat_req;
- struct usb_cdc_notification *event;
- int value;
-
- DEBUG (dev, "%s, flush old status first\n", __func__);
-
- /* flush old status
- *
- * FIXME ugly idiom, maybe we'd be better with just
- * a "cancel the whole queue" primitive since any
- * unlink-one primitive has way too many error modes.
- * here, we "know" toggle is already clear...
- *
- * FIXME iff req->context != null just dequeue it
- */
- usb_ep_disable (dev->status_ep);
- usb_ep_enable (dev->status_ep, dev->status);
-
- /* 3.8.1 says to issue first NETWORK_CONNECTION, then
- * a SPEED_CHANGE. could be useful in some configs.
- */
- event = req->buf;
- event->bmRequestType = 0xA1;
- event->bNotificationType = USB_CDC_NOTIFY_NETWORK_CONNECTION;
- event->wValue = __constant_cpu_to_le16 (1); /* connected */
- event->wIndex = __constant_cpu_to_le16 (1);
- event->wLength = 0;
-
- req->length = sizeof *event;
- req->complete = eth_status_complete;
- req->context = dev;
-
- value = usb_ep_queue (dev->status_ep, req, GFP_ATOMIC);
- if (value < 0)
- DEBUG (dev, "status buf queue --> %d\n", value);
-}
-
-#endif
+static struct usb_configuration rndis_config_driver = {
+ .label = "RNDIS",
+ .bind = rndis_do_config,
+ .bConfigurationValue = 2,
+ /* .iConfiguration = DYNAMIC */
+ .bmAttributes = USB_CONFIG_ATT_SELFPOWER,
+ .bMaxPower = 1, /* 2 mA, minimal */
+};
/*-------------------------------------------------------------------------*/
-static void eth_setup_complete (struct usb_ep *ep, struct usb_request *req)
-{
- if (req->status || req->actual != req->length)
- DEBUG ((struct eth_dev *) ep->driver_data,
- "setup complete --> %d, %d/%d\n",
- req->status, req->actual, req->length);
-}
-
-#ifdef CONFIG_USB_ETH_RNDIS
-
-static void rndis_response_complete (struct usb_ep *ep, struct usb_request *req)
-{
- if (req->status || req->actual != req->length)
- DEBUG ((struct eth_dev *) ep->driver_data,
- "rndis response complete --> %d, %d/%d\n",
- req->status, req->actual, req->length);
-
- /* done sending after USB_CDC_GET_ENCAPSULATED_RESPONSE */
-}
-
-static void rndis_command_complete (struct usb_ep *ep, struct usb_request *req)
-{
- struct eth_dev *dev = ep->driver_data;
- int status;
-
- /* received RNDIS command from USB_CDC_SEND_ENCAPSULATED_COMMAND */
- spin_lock(&dev->lock);
- status = rndis_msg_parser (dev->rndis_config, (u8 *) req->buf);
- if (status < 0)
- ERROR(dev, "%s: rndis parse error %d\n", __func__, status);
- spin_unlock(&dev->lock);
-}
-
-#endif /* RNDIS */
-
/*
- * The setup() callback implements all the ep0 functionality that's not
- * handled lower down. CDC has a number of less-common features:
- *
- * - two interfaces: control, and ethernet data
- * - Ethernet data interface has two altsettings: default, and active
- * - class-specific descriptors for the control interface
- * - class-specific control requests
+ * We _always_ have an ECM or CDC Subset configuration.
*/
-static int
-eth_setup (struct usb_gadget *gadget, const struct usb_ctrlrequest *ctrl)
+static int __init eth_do_config(struct usb_configuration *c)
{
- struct eth_dev *dev = get_gadget_data (gadget);
- struct usb_request *req = dev->req;
- int value = -EOPNOTSUPP;
- u16 wIndex = le16_to_cpu(ctrl->wIndex);
- u16 wValue = le16_to_cpu(ctrl->wValue);
- u16 wLength = le16_to_cpu(ctrl->wLength);
-
- /* descriptors just go into the pre-allocated ep0 buffer,
- * while config change events may enable network traffic.
- */
- req->complete = eth_setup_complete;
- switch (ctrl->bRequest) {
-
- case USB_REQ_GET_DESCRIPTOR:
- if (ctrl->bRequestType != USB_DIR_IN)
- break;
- switch (wValue >> 8) {
-
- case USB_DT_DEVICE:
- value = min (wLength, (u16) sizeof device_desc);
- memcpy (req->buf, &device_desc, value);
- break;
- case USB_DT_DEVICE_QUALIFIER:
- if (!gadget_is_dualspeed(gadget))
- break;
- value = min (wLength, (u16) sizeof dev_qualifier);
- memcpy (req->buf, &dev_qualifier, value);
- break;
-
- case USB_DT_OTHER_SPEED_CONFIG:
- if (!gadget_is_dualspeed(gadget))
- break;
- // FALLTHROUGH
- case USB_DT_CONFIG:
- value = config_buf(gadget, req->buf,
- wValue >> 8,
- wValue & 0xff,
- gadget_is_otg(gadget));
- if (value >= 0)
- value = min (wLength, (u16) value);
- break;
-
- case USB_DT_STRING:
- value = usb_gadget_get_string (&stringtab,
- wValue & 0xff, req->buf);
- if (value >= 0)
- value = min (wLength, (u16) value);
- break;
- }
- break;
-
- case USB_REQ_SET_CONFIGURATION:
- if (ctrl->bRequestType != 0)
- break;
- if (gadget->a_hnp_support)
- DEBUG (dev, "HNP available\n");
- else if (gadget->a_alt_hnp_support)
- DEBUG (dev, "HNP needs a different root port\n");
- spin_lock (&dev->lock);
- value = eth_set_config (dev, wValue, GFP_ATOMIC);
- spin_unlock (&dev->lock);
- break;
- case USB_REQ_GET_CONFIGURATION:
- if (ctrl->bRequestType != USB_DIR_IN)
- break;
- *(u8 *)req->buf = dev->config;
- value = min (wLength, (u16) 1);
- break;
-
- case USB_REQ_SET_INTERFACE:
- if (ctrl->bRequestType != USB_RECIP_INTERFACE
- || !dev->config
- || wIndex > 1)
- break;
- if (!cdc_active(dev) && wIndex != 0)
- break;
- spin_lock (&dev->lock);
-
- /* PXA hardware partially handles SET_INTERFACE;
- * we need to kluge around that interference.
- */
- if (gadget_is_pxa (gadget)) {
- value = eth_set_config (dev, DEV_CONFIG_VALUE,
- GFP_ATOMIC);
- goto done_set_intf;
- }
-
-#ifdef DEV_CONFIG_CDC
- switch (wIndex) {
- case 0: /* control/master intf */
- if (wValue != 0)
- break;
- if (dev->status) {
- usb_ep_disable (dev->status_ep);
- usb_ep_enable (dev->status_ep, dev->status);
- }
- value = 0;
- break;
- case 1: /* data intf */
- if (wValue > 1)
- break;
- usb_ep_disable (dev->in_ep);
- usb_ep_disable (dev->out_ep);
-
- /* CDC requires the data transfers not be done from
- * the default interface setting ... also, setting
- * the non-default interface resets filters etc.
- */
- if (wValue == 1) {
- if (!cdc_active (dev))
- break;
- usb_ep_enable (dev->in_ep, dev->in);
- usb_ep_enable (dev->out_ep, dev->out);
- dev->cdc_filter = DEFAULT_FILTER;
- netif_carrier_on (dev->net);
- if (dev->status)
- issue_start_status (dev);
- if (netif_running (dev->net)) {
- spin_unlock (&dev->lock);
- eth_start (dev, GFP_ATOMIC);
- spin_lock (&dev->lock);
- }
- } else {
- netif_stop_queue (dev->net);
- netif_carrier_off (dev->net);
- }
- value = 0;
- break;
- }
-#else
- /* FIXME this is wrong, as is the assumption that
- * all non-PXA hardware talks real CDC ...
- */
- dev_warn (&gadget->dev, "set_interface ignored!\n");
-#endif /* DEV_CONFIG_CDC */
-
-done_set_intf:
- spin_unlock (&dev->lock);
- break;
- case USB_REQ_GET_INTERFACE:
- if (ctrl->bRequestType != (USB_DIR_IN|USB_RECIP_INTERFACE)
- || !dev->config
- || wIndex > 1)
- break;
- if (!(cdc_active(dev) || rndis_active(dev)) && wIndex != 0)
- break;
-
- /* for CDC, iff carrier is on, data interface is active. */
- if (rndis_active(dev) || wIndex != 1)
- *(u8 *)req->buf = 0;
- else
- *(u8 *)req->buf = netif_carrier_ok (dev->net) ? 1 : 0;
- value = min (wLength, (u16) 1);
- break;
-
-#ifdef DEV_CONFIG_CDC
- case USB_CDC_SET_ETHERNET_PACKET_FILTER:
- /* see 6.2.30: no data, wIndex = interface,
- * wValue = packet filter bitmap
- */
- if (ctrl->bRequestType != (USB_TYPE_CLASS|USB_RECIP_INTERFACE)
- || !cdc_active(dev)
- || wLength != 0
- || wIndex > 1)
- break;
- DEBUG (dev, "packet filter %02x\n", wValue);
- dev->cdc_filter = wValue;
- value = 0;
- break;
-
- /* and potentially:
- * case USB_CDC_SET_ETHERNET_MULTICAST_FILTERS:
- * case USB_CDC_SET_ETHERNET_PM_PATTERN_FILTER:
- * case USB_CDC_GET_ETHERNET_PM_PATTERN_FILTER:
- * case USB_CDC_GET_ETHERNET_STATISTIC:
- */
-
-#endif /* DEV_CONFIG_CDC */
+ /* FIXME alloc iConfiguration string, set it in c->strings */
-#ifdef CONFIG_USB_ETH_RNDIS
- /* RNDIS uses the CDC command encapsulation mechanism to implement
- * an RPC scheme, with much getting/setting of attributes by OID.
- */
- case USB_CDC_SEND_ENCAPSULATED_COMMAND:
- if (ctrl->bRequestType != (USB_TYPE_CLASS|USB_RECIP_INTERFACE)
- || !rndis_active(dev)
- || wLength > USB_BUFSIZ
- || wValue
- || rndis_control_intf.bInterfaceNumber
- != wIndex)
- break;
- /* read the request, then process it */
- value = wLength;
- req->complete = rndis_command_complete;
- /* later, rndis_control_ack () sends a notification */
- break;
-
- case USB_CDC_GET_ENCAPSULATED_RESPONSE:
- if ((USB_DIR_IN|USB_TYPE_CLASS|USB_RECIP_INTERFACE)
- == ctrl->bRequestType
- && rndis_active(dev)
- // && wLength >= 0x0400
- && !wValue
- && rndis_control_intf.bInterfaceNumber
- == wIndex) {
- u8 *buf;
- u32 n;
-
- /* return the result */
- buf = rndis_get_next_response(dev->rndis_config, &n);
- if (buf) {
- memcpy(req->buf, buf, n);
- req->complete = rndis_response_complete;
- rndis_free_response(dev->rndis_config, buf);
- value = n;
- }
- /* else stalls ... spec says to avoid that */
- }
- break;
-#endif /* RNDIS */
-
- default:
- VDEBUG (dev,
- "unknown control req%02x.%02x v%04x i%04x l%d\n",
- ctrl->bRequestType, ctrl->bRequest,
- wValue, wIndex, wLength);
+ if (gadget_is_otg(c->cdev->gadget)) {
+ c->descriptors = otg_desc;
+ c->bmAttributes |= USB_CONFIG_ATT_WAKEUP;
}
- /* respond with data transfer before status phase? */
- if (value >= 0) {
- req->length = value;
- req->zero = value < wLength
- && (value % gadget->ep0->maxpacket) == 0;
- value = usb_ep_queue (gadget->ep0, req, GFP_ATOMIC);
- if (value < 0) {
- DEBUG (dev, "ep_queue --> %d\n", value);
- req->status = 0;
- eth_setup_complete (gadget->ep0, req);
- }
- }
-
- /* host either stalls (value < 0) or reports success */
- return value;
-}
-
-static void
-eth_disconnect (struct usb_gadget *gadget)
-{
- struct eth_dev *dev = get_gadget_data (gadget);
- unsigned long flags;
-
- spin_lock_irqsave (&dev->lock, flags);
- netif_stop_queue (dev->net);
- netif_carrier_off (dev->net);
- eth_reset_config (dev);
- spin_unlock_irqrestore (&dev->lock, flags);
-
- /* FIXME RNDIS should enter RNDIS_UNINITIALIZED */
-
- /* next we may get setup() calls to enumerate new connections;
- * or an unbind() during shutdown (including removing module).
- */
-}
-
-/*-------------------------------------------------------------------------*/
-
-/* NETWORK DRIVER HOOKUP (to the layer above this driver) */
-
-static int eth_change_mtu (struct net_device *net, int new_mtu)
-{
- struct eth_dev *dev = netdev_priv(net);
-
- if (dev->rndis)
- return -EBUSY;
-
- if (new_mtu <= ETH_HLEN || new_mtu > ETH_FRAME_LEN)
- return -ERANGE;
- /* no zero-length packet read wanted after mtu-sized packets */
- if (((new_mtu + sizeof (struct ethhdr)) % dev->in_ep->maxpacket) == 0)
- return -EDOM;
- net->mtu = new_mtu;
- return 0;
-}
-
-static struct net_device_stats *eth_get_stats (struct net_device *net)
-{
- return &((struct eth_dev *)netdev_priv(net))->stats;
-}
-
-static void eth_get_drvinfo(struct net_device *net, struct ethtool_drvinfo *p)
-{
- struct eth_dev *dev = netdev_priv(net);
- strlcpy(p->driver, shortname, sizeof p->driver);
- strlcpy(p->version, DRIVER_VERSION, sizeof p->version);
- strlcpy(p->fw_version, dev->gadget->name, sizeof p->fw_version);
- strlcpy (p->bus_info, dev->gadget->dev.bus_id, sizeof p->bus_info);
-}
-
-static u32 eth_get_link(struct net_device *net)
-{
- struct eth_dev *dev = netdev_priv(net);
- return dev->gadget->speed != USB_SPEED_UNKNOWN;
-}
-
-static struct ethtool_ops ops = {
- .get_drvinfo = eth_get_drvinfo,
- .get_link = eth_get_link
-};
-
-static void defer_kevent (struct eth_dev *dev, int flag)
-{
- if (test_and_set_bit (flag, &dev->todo))
- return;
- if (!schedule_work (&dev->work))
- ERROR (dev, "kevent %d may have been dropped\n", flag);
+ if (can_support_ecm(c->cdev->gadget))
+ return ecm_bind_config(c, hostaddr);
else
- DEBUG (dev, "kevent %d scheduled\n", flag);
-}
-
-static void rx_complete (struct usb_ep *ep, struct usb_request *req);
-
-static int
-rx_submit (struct eth_dev *dev, struct usb_request *req, gfp_t gfp_flags)
-{
- struct sk_buff *skb;
- int retval = -ENOMEM;
- size_t size;
-
- /* Padding up to RX_EXTRA handles minor disagreements with host.
- * Normally we use the USB "terminate on short read" convention;
- * so allow up to (N*maxpacket), since that memory is normally
- * already allocated. Some hardware doesn't deal well with short
- * reads (e.g. DMA must be N*maxpacket), so for now don't trim a
- * byte off the end (to force hardware errors on overflow).
- *
- * RNDIS uses internal framing, and explicitly allows senders to
- * pad to end-of-packet. That's potentially nice for speed,
- * but means receivers can't recover synch on their own.
- */
- size = (sizeof (struct ethhdr) + dev->net->mtu + RX_EXTRA);
- size += dev->out_ep->maxpacket - 1;
- if (rndis_active(dev))
- size += sizeof (struct rndis_packet_msg_type);
- size -= size % dev->out_ep->maxpacket;
-
- skb = alloc_skb(size + NET_IP_ALIGN, gfp_flags);
- if (skb == NULL) {
- DEBUG (dev, "no rx skb\n");
- goto enomem;
- }
-
- /* Some platforms perform better when IP packets are aligned,
- * but on at least one, checksumming fails otherwise. Note:
- * RNDIS headers involve variable numbers of LE32 values.
- */
- skb_reserve(skb, NET_IP_ALIGN);
-
- req->buf = skb->data;
- req->length = size;
- req->complete = rx_complete;
- req->context = skb;
-
- retval = usb_ep_queue (dev->out_ep, req, gfp_flags);
- if (retval == -ENOMEM)
-enomem:
- defer_kevent (dev, WORK_RX_MEMORY);
- if (retval) {
- DEBUG (dev, "rx submit --> %d\n", retval);
- if (skb)
- dev_kfree_skb_any(skb);
- spin_lock(&dev->req_lock);
- list_add (&req->list, &dev->rx_reqs);
- spin_unlock(&dev->req_lock);
- }
- return retval;
-}
-
-static void rx_complete (struct usb_ep *ep, struct usb_request *req)
-{
- struct sk_buff *skb = req->context;
- struct eth_dev *dev = ep->driver_data;
- int status = req->status;
-
- switch (status) {
-
- /* normal completion */
- case 0:
- skb_put (skb, req->actual);
- /* we know MaxPacketsPerTransfer == 1 here */
- if (rndis_active(dev))
- status = rndis_rm_hdr (skb);
- if (status < 0
- || ETH_HLEN > skb->len
- || skb->len > ETH_FRAME_LEN) {
- dev->stats.rx_errors++;
- dev->stats.rx_length_errors++;
- DEBUG (dev, "rx length %d\n", skb->len);
- break;
- }
-
- skb->protocol = eth_type_trans (skb, dev->net);
- dev->stats.rx_packets++;
- dev->stats.rx_bytes += skb->len;
-
- /* no buffer copies needed, unless hardware can't
- * use skb buffers.
- */
- status = netif_rx (skb);
- skb = NULL;
- break;
-
- /* software-driven interface shutdown */
- case -ECONNRESET: // unlink
- case -ESHUTDOWN: // disconnect etc
- VDEBUG (dev, "rx shutdown, code %d\n", status);
- goto quiesce;
-
- /* for hardware automagic (such as pxa) */
- case -ECONNABORTED: // endpoint reset
- DEBUG (dev, "rx %s reset\n", ep->name);
- defer_kevent (dev, WORK_RX_MEMORY);
-quiesce:
- dev_kfree_skb_any (skb);
- goto clean;
-
- /* data overrun */
- case -EOVERFLOW:
- dev->stats.rx_over_errors++;
- // FALLTHROUGH
-
- default:
- dev->stats.rx_errors++;
- DEBUG (dev, "rx status %d\n", status);
- break;
- }
-
- if (skb)
- dev_kfree_skb_any (skb);
- if (!netif_running (dev->net)) {
-clean:
- spin_lock(&dev->req_lock);
- list_add (&req->list, &dev->rx_reqs);
- spin_unlock(&dev->req_lock);
- req = NULL;
- }
- if (req)
- rx_submit (dev, req, GFP_ATOMIC);
-}
-
-static int prealloc (struct list_head *list, struct usb_ep *ep,
- unsigned n, gfp_t gfp_flags)
-{
- unsigned i;
- struct usb_request *req;
-
- if (!n)
- return -ENOMEM;
-
- /* queue/recycle up to N requests */
- i = n;
- list_for_each_entry (req, list, list) {
- if (i-- == 0)
- goto extra;
- }
- while (i--) {
- req = usb_ep_alloc_request (ep, gfp_flags);
- if (!req)
- return list_empty (list) ? -ENOMEM : 0;
- list_add (&req->list, list);
- }
- return 0;
-
-extra:
- /* free extras */
- for (;;) {
- struct list_head *next;
-
- next = req->list.next;
- list_del (&req->list);
- usb_ep_free_request (ep, req);
-
- if (next == list)
- break;
-
- req = container_of (next, struct usb_request, list);
- }
- return 0;
-}
-
-static int alloc_requests (struct eth_dev *dev, unsigned n, gfp_t gfp_flags)
-{
- int status;
-
- spin_lock(&dev->req_lock);
- status = prealloc (&dev->tx_reqs, dev->in_ep, n, gfp_flags);
- if (status < 0)
- goto fail;
- status = prealloc (&dev->rx_reqs, dev->out_ep, n, gfp_flags);
- if (status < 0)
- goto fail;
- goto done;
-fail:
- DEBUG (dev, "can't alloc requests\n");
-done:
- spin_unlock(&dev->req_lock);
- return status;
-}
-
-static void rx_fill (struct eth_dev *dev, gfp_t gfp_flags)
-{
- struct usb_request *req;
- unsigned long flags;
-
- /* fill unused rxq slots with some skb */
- spin_lock_irqsave(&dev->req_lock, flags);
- while (!list_empty (&dev->rx_reqs)) {
- req = container_of (dev->rx_reqs.next,
- struct usb_request, list);
- list_del_init (&req->list);
- spin_unlock_irqrestore(&dev->req_lock, flags);
-
- if (rx_submit (dev, req, gfp_flags) < 0) {
- defer_kevent (dev, WORK_RX_MEMORY);
- return;
- }
-
- spin_lock_irqsave(&dev->req_lock, flags);
- }
- spin_unlock_irqrestore(&dev->req_lock, flags);
-}
-
-static void eth_work (struct work_struct *work)
-{
- struct eth_dev *dev = container_of(work, struct eth_dev, work);
-
- if (test_and_clear_bit (WORK_RX_MEMORY, &dev->todo)) {
- if (netif_running (dev->net))
- rx_fill (dev, GFP_KERNEL);
- }
-
- if (dev->todo)
- DEBUG (dev, "work done, flags = 0x%lx\n", dev->todo);
-}
-
-static void tx_complete (struct usb_ep *ep, struct usb_request *req)
-{
- struct sk_buff *skb = req->context;
- struct eth_dev *dev = ep->driver_data;
-
- switch (req->status) {
- default:
- dev->stats.tx_errors++;
- VDEBUG (dev, "tx err %d\n", req->status);
- /* FALLTHROUGH */
- case -ECONNRESET: // unlink
- case -ESHUTDOWN: // disconnect etc
- break;
- case 0:
- dev->stats.tx_bytes += skb->len;
- }
- dev->stats.tx_packets++;
-
- spin_lock(&dev->req_lock);
- list_add (&req->list, &dev->tx_reqs);
- spin_unlock(&dev->req_lock);
- dev_kfree_skb_any (skb);
-
- atomic_dec (&dev->tx_qlen);
- if (netif_carrier_ok (dev->net))
- netif_wake_queue (dev->net);
-}
-
-static inline int eth_is_promisc (struct eth_dev *dev)
-{
- /* no filters for the CDC subset; always promisc */
- if (subset_active (dev))
- return 1;
- return dev->cdc_filter & USB_CDC_PACKET_TYPE_PROMISCUOUS;
-}
-
-static int eth_start_xmit (struct sk_buff *skb, struct net_device *net)
-{
- struct eth_dev *dev = netdev_priv(net);
- int length = skb->len;
- int retval;
- struct usb_request *req = NULL;
- unsigned long flags;
-
- /* apply outgoing CDC or RNDIS filters */
- if (!eth_is_promisc (dev)) {
- u8 *dest = skb->data;
-
- if (is_multicast_ether_addr(dest)) {
- u16 type;
-
- /* ignores USB_CDC_PACKET_TYPE_MULTICAST and host
- * SET_ETHERNET_MULTICAST_FILTERS requests
- */
- if (is_broadcast_ether_addr(dest))
- type = USB_CDC_PACKET_TYPE_BROADCAST;
- else
- type = USB_CDC_PACKET_TYPE_ALL_MULTICAST;
- if (!(dev->cdc_filter & type)) {
- dev_kfree_skb_any (skb);
- return 0;
- }
- }
- /* ignores USB_CDC_PACKET_TYPE_DIRECTED */
- }
-
- spin_lock_irqsave(&dev->req_lock, flags);
- /*
- * this freelist can be empty if an interrupt triggered disconnect()
- * and reconfigured the gadget (shutting down this queue) after the
- * network stack decided to xmit but before we got the spinlock.
- */
- if (list_empty(&dev->tx_reqs)) {
- spin_unlock_irqrestore(&dev->req_lock, flags);
- return 1;
- }
-
- req = container_of (dev->tx_reqs.next, struct usb_request, list);
- list_del (&req->list);
-
- /* temporarily stop TX queue when the freelist empties */
- if (list_empty (&dev->tx_reqs))
- netif_stop_queue (net);
- spin_unlock_irqrestore(&dev->req_lock, flags);
-
- /* no buffer copies needed, unless the network stack did it
- * or the hardware can't use skb buffers.
- * or there's not enough space for any RNDIS headers we need
- */
- if (rndis_active(dev)) {
- struct sk_buff *skb_rndis;
-
- skb_rndis = skb_realloc_headroom (skb,
- sizeof (struct rndis_packet_msg_type));
- if (!skb_rndis)
- goto drop;
-
- dev_kfree_skb_any (skb);
- skb = skb_rndis;
- rndis_add_hdr (skb);
- length = skb->len;
- }
- req->buf = skb->data;
- req->context = skb;
- req->complete = tx_complete;
-
- /* use zlp framing on tx for strict CDC-Ether conformance,
- * though any robust network rx path ignores extra padding.
- * and some hardware doesn't like to write zlps.
- */
- req->zero = 1;
- if (!dev->zlp && (length % dev->in_ep->maxpacket) == 0)
- length++;
-
- req->length = length;
-
- /* throttle highspeed IRQ rate back slightly */
- if (gadget_is_dualspeed(dev->gadget))
- req->no_interrupt = (dev->gadget->speed == USB_SPEED_HIGH)
- ? ((atomic_read(&dev->tx_qlen) % qmult) != 0)
- : 0;
-
- retval = usb_ep_queue (dev->in_ep, req, GFP_ATOMIC);
- switch (retval) {
- default:
- DEBUG (dev, "tx queue err %d\n", retval);
- break;
- case 0:
- net->trans_start = jiffies;
- atomic_inc (&dev->tx_qlen);
- }
-
- if (retval) {
-drop:
- dev->stats.tx_dropped++;
- dev_kfree_skb_any (skb);
- spin_lock_irqsave(&dev->req_lock, flags);
- if (list_empty (&dev->tx_reqs))
- netif_start_queue (net);
- list_add (&req->list, &dev->tx_reqs);
- spin_unlock_irqrestore(&dev->req_lock, flags);
- }
- return 0;
-}
-
-/*-------------------------------------------------------------------------*/
-
-#ifdef CONFIG_USB_ETH_RNDIS
-
-/* The interrupt endpoint is used in RNDIS to notify the host when messages
- * other than data packets are available ... notably the REMOTE_NDIS_*_CMPLT
- * messages, but also REMOTE_NDIS_INDICATE_STATUS_MSG and potentially even
- * REMOTE_NDIS_KEEPALIVE_MSG.
- *
- * The RNDIS control queue is processed by GET_ENCAPSULATED_RESPONSE, and
- * normally just one notification will be queued.
- */
-
-static struct usb_request *eth_req_alloc (struct usb_ep *, unsigned, gfp_t);
-static void eth_req_free (struct usb_ep *ep, struct usb_request *req);
-
-static void
-rndis_control_ack_complete (struct usb_ep *ep, struct usb_request *req)
-{
- struct eth_dev *dev = ep->driver_data;
-
- if (req->status || req->actual != req->length)
- DEBUG (dev,
- "rndis control ack complete --> %d, %d/%d\n",
- req->status, req->actual, req->length);
- req->context = NULL;
-
- if (req != dev->stat_req)
- eth_req_free(ep, req);
-}
-
-static int rndis_control_ack (struct net_device *net)
-{
- struct eth_dev *dev = netdev_priv(net);
- int length;
- struct usb_request *resp = dev->stat_req;
-
- /* in case RNDIS calls this after disconnect */
- if (!dev->status) {
- DEBUG (dev, "status ENODEV\n");
- return -ENODEV;
- }
-
- /* in case queue length > 1 */
- if (resp->context) {
- resp = eth_req_alloc (dev->status_ep, 8, GFP_ATOMIC);
- if (!resp)
- return -ENOMEM;
- }
-
- /* Send RNDIS RESPONSE_AVAILABLE notification;
- * USB_CDC_NOTIFY_RESPONSE_AVAILABLE should work too
- */
- resp->length = 8;
- resp->complete = rndis_control_ack_complete;
- resp->context = dev;
-
- *((__le32 *) resp->buf) = __constant_cpu_to_le32 (1);
- *((__le32 *) resp->buf + 1) = __constant_cpu_to_le32 (0);
-
- length = usb_ep_queue (dev->status_ep, resp, GFP_ATOMIC);
- if (length < 0) {
- resp->status = 0;
- rndis_control_ack_complete (dev->status_ep, resp);
- }
-
- return 0;
-}
-
-#else
-
-#define rndis_control_ack NULL
-
-#endif /* RNDIS */
-
-static void eth_start (struct eth_dev *dev, gfp_t gfp_flags)
-{
- DEBUG (dev, "%s\n", __func__);
-
- /* fill the rx queue */
- rx_fill (dev, gfp_flags);
-
- /* and open the tx floodgates */
- atomic_set (&dev->tx_qlen, 0);
- netif_wake_queue (dev->net);
- if (rndis_active(dev)) {
- rndis_set_param_medium (dev->rndis_config,
- NDIS_MEDIUM_802_3,
- BITRATE(dev->gadget)/100);
- (void) rndis_signal_connect (dev->rndis_config);
- }
-}
-
-static int eth_open (struct net_device *net)
-{
- struct eth_dev *dev = netdev_priv(net);
-
- DEBUG (dev, "%s\n", __func__);
- if (netif_carrier_ok (dev->net))
- eth_start (dev, GFP_KERNEL);
- return 0;
+ return geth_bind_config(c, hostaddr);
}
-static int eth_stop (struct net_device *net)
-{
- struct eth_dev *dev = netdev_priv(net);
-
- VDEBUG (dev, "%s\n", __func__);
- netif_stop_queue (net);
-
- DEBUG (dev, "stop stats: rx/tx %ld/%ld, errs %ld/%ld\n",
- dev->stats.rx_packets, dev->stats.tx_packets,
- dev->stats.rx_errors, dev->stats.tx_errors
- );
-
- /* ensure there are no more active requests */
- if (dev->config) {
- usb_ep_disable (dev->in_ep);
- usb_ep_disable (dev->out_ep);
- if (netif_carrier_ok (dev->net)) {
- DEBUG (dev, "host still using in/out endpoints\n");
- // FIXME idiom may leave toggle wrong here
- usb_ep_enable (dev->in_ep, dev->in);
- usb_ep_enable (dev->out_ep, dev->out);
- }
- if (dev->status_ep) {
- usb_ep_disable (dev->status_ep);
- usb_ep_enable (dev->status_ep, dev->status);
- }
- }
-
- if (rndis_active(dev)) {
- rndis_set_param_medium(dev->rndis_config, NDIS_MEDIUM_802_3, 0);
- (void) rndis_signal_disconnect (dev->rndis_config);
- }
-
- return 0;
-}
+static struct usb_configuration eth_config_driver = {
+ /* .label = f(hardware) */
+ .bind = eth_do_config,
+ .bConfigurationValue = 1,
+ /* .iConfiguration = DYNAMIC */
+ .bmAttributes = USB_CONFIG_ATT_SELFPOWER,
+ .bMaxPower = 1, /* 2 mA, minimal */
+};
/*-------------------------------------------------------------------------*/
-static struct usb_request *
-eth_req_alloc (struct usb_ep *ep, unsigned size, gfp_t gfp_flags)
+static int __init eth_bind(struct usb_composite_dev *cdev)
{
- struct usb_request *req;
-
- req = usb_ep_alloc_request (ep, gfp_flags);
- if (!req)
- return NULL;
-
- req->buf = kmalloc (size, gfp_flags);
- if (!req->buf) {
- usb_ep_free_request (ep, req);
- req = NULL;
- }
- return req;
-}
-
-static void
-eth_req_free (struct usb_ep *ep, struct usb_request *req)
-{
- kfree (req->buf);
- usb_ep_free_request (ep, req);
-}
-
-
-static void /* __init_or_exit */
-eth_unbind (struct usb_gadget *gadget)
-{
- struct eth_dev *dev = get_gadget_data (gadget);
-
- DEBUG (dev, "unbind\n");
- rndis_deregister (dev->rndis_config);
- rndis_exit ();
-
- /* we've already been disconnected ... no i/o is active */
- if (dev->req) {
- eth_req_free (gadget->ep0, dev->req);
- dev->req = NULL;
- }
- if (dev->stat_req) {
- eth_req_free (dev->status_ep, dev->stat_req);
- dev->stat_req = NULL;
- }
-
- unregister_netdev (dev->net);
- free_netdev(dev->net);
-
- /* assuming we used keventd, it must quiesce too */
- flush_scheduled_work ();
- set_gadget_data (gadget, NULL);
-}
-
-static u8 __init nibble (unsigned char c)
-{
- if (likely (isdigit (c)))
- return c - '0';
- c = toupper (c);
- if (likely (isxdigit (c)))
- return 10 + c - 'A';
- return 0;
-}
+ int gcnum;
+ struct usb_gadget *gadget = cdev->gadget;
+ int status;
-static int __init get_ether_addr(const char *str, u8 *dev_addr)
-{
- if (str) {
- unsigned i;
+ /* set up network link layer */
+ status = gether_setup(cdev->gadget, hostaddr);
+ if (status < 0)
+ return status;
- for (i = 0; i < 6; i++) {
- unsigned char num;
+ /* set up main config label and device descriptor */
+ if (can_support_ecm(cdev->gadget)) {
+ /* ECM */
+ eth_config_driver.label = "CDC Ethernet (ECM)";
+ } else {
+ /* CDC Subset */
+ eth_config_driver.label = "CDC Subset/SAFE";
- if((*str == '.') || (*str == ':'))
- str++;
- num = nibble(*str++) << 4;
- num |= (nibble(*str++));
- dev_addr [i] = num;
- }
- if (is_valid_ether_addr (dev_addr))
- return 0;
+ device_desc.idVendor = cpu_to_le16(SIMPLE_VENDOR_NUM),
+ device_desc.idProduct = cpu_to_le16(SIMPLE_PRODUCT_NUM),
+ device_desc.bDeviceClass = USB_CLASS_VENDOR_SPEC;
}
- random_ether_addr(dev_addr);
- return 1;
-}
-
-static int __init
-eth_bind (struct usb_gadget *gadget)
-{
- struct eth_dev *dev;
- struct net_device *net;
- u8 cdc = 1, zlp = 1, rndis = 1;
- struct usb_ep *in_ep, *out_ep, *status_ep = NULL;
- int status = -ENOMEM;
- int gcnum;
-
- /* these flags are only ever cleared; compiler take note */
-#ifndef DEV_CONFIG_CDC
- cdc = 0;
-#endif
-#ifndef CONFIG_USB_ETH_RNDIS
- rndis = 0;
-#endif
- /* Because most host side USB stacks handle CDC Ethernet, that
- * standard protocol is _strongly_ preferred for interop purposes.
- * (By everyone except Microsoft.)
- */
- if (gadget_is_pxa (gadget)) {
- /* pxa doesn't support altsettings */
- cdc = 0;
- } else if (gadget_is_musbhdrc(gadget)) {
- /* reduce tx dma overhead by avoiding special cases */
- zlp = 0;
- } else if (gadget_is_sh(gadget)) {
- /* sh doesn't support multiple interfaces or configs */
- cdc = 0;
- rndis = 0;
- } else if (gadget_is_sa1100 (gadget)) {
- /* hardware can't write zlps */
- zlp = 0;
- /* sa1100 CAN do CDC, without status endpoint ... we use
- * non-CDC to be compatible with ARM Linux-2.4 "usb-eth".
- */
- cdc = 0;
+ if (has_rndis()) {
+ /* RNDIS plus ECM-or-Subset */
+ device_desc.idVendor = cpu_to_le16(RNDIS_VENDOR_NUM),
+ device_desc.idProduct = cpu_to_le16(RNDIS_PRODUCT_NUM),
+ device_desc.bNumConfigurations = 2;
}
- gcnum = usb_gadget_controller_number (gadget);
+ gcnum = usb_gadget_controller_number(gadget);
if (gcnum >= 0)
- device_desc.bcdDevice = cpu_to_le16 (0x0200 + gcnum);
+ device_desc.bcdDevice = cpu_to_le16(0x0300 | gcnum);
else {
- /* can't assume CDC works. don't want to default to
- * anything less functional on CDC-capable hardware,
- * so we fail in this case.
+ /* We assume that can_support_ecm() tells the truth;
+ * but if the controller isn't recognized at all then
+ * that assumption is a bit more likely to be wrong.
*/
- dev_err (&gadget->dev,
- "controller '%s' not recognized\n",
- gadget->name);
- return -ENODEV;
- }
- snprintf (manufacturer, sizeof manufacturer, "%s %s/%s",
- init_utsname()->sysname, init_utsname()->release,
- gadget->name);
-
- /* If there's an RNDIS configuration, that's what Windows wants to
- * be using ... so use these product IDs here and in the "linux.inf"
- * needed to install MSFT drivers. Current Linux kernels will use
- * the second configuration if it's CDC Ethernet, and need some help
- * to choose the right configuration otherwise.
- */
- if (rndis) {
- device_desc.idVendor =
- __constant_cpu_to_le16(RNDIS_VENDOR_NUM);
- device_desc.idProduct =
- __constant_cpu_to_le16(RNDIS_PRODUCT_NUM);
- snprintf (product_desc, sizeof product_desc,
- "RNDIS/%s", driver_desc);
-
- /* CDC subset ... recognized by Linux since 2.4.10, but Windows
- * drivers aren't widely available. (That may be improved by
- * supporting one submode of the "SAFE" variant of MDLM.)
- */
- } else if (!cdc) {
- device_desc.idVendor =
- __constant_cpu_to_le16(SIMPLE_VENDOR_NUM);
- device_desc.idProduct =
- __constant_cpu_to_le16(SIMPLE_PRODUCT_NUM);
- }
-
- /* support optional vendor/distro customization */
- if (idVendor) {
- if (!idProduct) {
- dev_err (&gadget->dev, "idVendor needs idProduct!\n");
- return -ENODEV;
- }
- device_desc.idVendor = cpu_to_le16(idVendor);
- device_desc.idProduct = cpu_to_le16(idProduct);
- if (bcdDevice)
- device_desc.bcdDevice = cpu_to_le16(bcdDevice);
- }
- if (iManufacturer)
- strlcpy (manufacturer, iManufacturer, sizeof manufacturer);
- if (iProduct)
- strlcpy (product_desc, iProduct, sizeof product_desc);
- if (iSerialNumber) {
- device_desc.iSerialNumber = STRING_SERIALNUMBER,
- strlcpy(serial_number, iSerialNumber, sizeof serial_number);
- }
-
- /* all we really need is bulk IN/OUT */
- usb_ep_autoconfig_reset (gadget);
- in_ep = usb_ep_autoconfig (gadget, &fs_source_desc);
- if (!in_ep) {
-autoconf_fail:
- dev_err (&gadget->dev,
- "can't autoconfigure on %s\n",
- gadget->name);
- return -ENODEV;
- }
- in_ep->driver_data = in_ep; /* claim */
-
- out_ep = usb_ep_autoconfig (gadget, &fs_sink_desc);
- if (!out_ep)
- goto autoconf_fail;
- out_ep->driver_data = out_ep; /* claim */
-
-#if defined(DEV_CONFIG_CDC) || defined(CONFIG_USB_ETH_RNDIS)
- /* CDC Ethernet control interface doesn't require a status endpoint.
- * Since some hosts expect one, try to allocate one anyway.
- */
- if (cdc || rndis) {
- status_ep = usb_ep_autoconfig (gadget, &fs_status_desc);
- if (status_ep) {
- status_ep->driver_data = status_ep; /* claim */
- } else if (rndis) {
- dev_err (&gadget->dev,
- "can't run RNDIS on %s\n",
- gadget->name);
- return -ENODEV;
-#ifdef DEV_CONFIG_CDC
- /* pxa25x only does CDC subset; often used with RNDIS */
- } else if (cdc) {
- control_intf.bNumEndpoints = 0;
- /* FIXME remove endpoint from descriptor list */
-#endif
- }
- }
-#endif
-
- /* one config: cdc, else minimal subset */
- if (!cdc) {
- eth_config.bNumInterfaces = 1;
- eth_config.iConfiguration = STRING_SUBSET;
-
- /* use functions to set these up, in case we're built to work
- * with multiple controllers and must override CDC Ethernet.
- */
- fs_subset_descriptors();
- hs_subset_descriptors();
- }
-
- device_desc.bMaxPacketSize0 = gadget->ep0->maxpacket;
- usb_gadget_set_selfpowered (gadget);
-
- /* For now RNDIS is always a second config */
- if (rndis)
- device_desc.bNumConfigurations = 2;
-
- if (gadget_is_dualspeed(gadget)) {
- if (rndis)
- dev_qualifier.bNumConfigurations = 2;
- else if (!cdc)
- dev_qualifier.bDeviceClass = USB_CLASS_VENDOR_SPEC;
-
- /* assumes ep0 uses the same value for both speeds ... */
- dev_qualifier.bMaxPacketSize0 = device_desc.bMaxPacketSize0;
-
- /* and that all endpoints are dual-speed */
- hs_source_desc.bEndpointAddress =
- fs_source_desc.bEndpointAddress;
- hs_sink_desc.bEndpointAddress =
- fs_sink_desc.bEndpointAddress;
-#if defined(DEV_CONFIG_CDC) || defined(CONFIG_USB_ETH_RNDIS)
- if (status_ep)
- hs_status_desc.bEndpointAddress =
- fs_status_desc.bEndpointAddress;
-#endif
+ WARN(cdev, "controller '%s' not recognized; trying %s\n",
+ gadget->name,
+ eth_config_driver.label);
+ device_desc.bcdDevice =
+ __constant_cpu_to_le16(0x0300 | 0x0099);
}
- if (gadget_is_otg(gadget)) {
- otg_descriptor.bmAttributes |= USB_OTG_HNP,
- eth_config.bmAttributes |= USB_CONFIG_ATT_WAKEUP;
- eth_config.bMaxPower = 4;
-#ifdef CONFIG_USB_ETH_RNDIS
- rndis_config.bmAttributes |= USB_CONFIG_ATT_WAKEUP;
- rndis_config.bMaxPower = 4;
-#endif
- }
-
- net = alloc_etherdev (sizeof *dev);
- if (!net)
- return status;
- dev = netdev_priv(net);
- spin_lock_init (&dev->lock);
- spin_lock_init (&dev->req_lock);
- INIT_WORK (&dev->work, eth_work);
- INIT_LIST_HEAD (&dev->tx_reqs);
- INIT_LIST_HEAD (&dev->rx_reqs);
-
- /* network device setup */
- dev->net = net;
- strcpy (net->name, "usb%d");
- dev->cdc = cdc;
- dev->zlp = zlp;
- dev->in_ep = in_ep;
- dev->out_ep = out_ep;
- dev->status_ep = status_ep;
-
- /* Module params for these addresses should come from ID proms.
- * The host side address is used with CDC and RNDIS, and commonly
- * ends up in a persistent config database. It's not clear if
- * host side code for the SAFE thing cares -- its original BLAN
- * thing didn't, Sharp never assigned those addresses on Zaurii.
+ /* Allocate string descriptor numbers ... note that string
+ * contents can be overridden by the composite_dev glue.
*/
- if (get_ether_addr(dev_addr, net->dev_addr))
- dev_warn(&gadget->dev,
- "using random %s ethernet address\n", "self");
- if (get_ether_addr(host_addr, dev->host_mac))
- dev_warn(&gadget->dev,
- "using random %s ethernet address\n", "host");
- snprintf (ethaddr, sizeof ethaddr, "%02X%02X%02X%02X%02X%02X",
- dev->host_mac [0], dev->host_mac [1],
- dev->host_mac [2], dev->host_mac [3],
- dev->host_mac [4], dev->host_mac [5]);
-
- if (rndis) {
- status = rndis_init();
- if (status < 0) {
- dev_err (&gadget->dev, "can't init RNDIS, %d\n",
- status);
- goto fail;
- }
- }
- net->change_mtu = eth_change_mtu;
- net->get_stats = eth_get_stats;
- net->hard_start_xmit = eth_start_xmit;
- net->open = eth_open;
- net->stop = eth_stop;
- // watchdog_timeo, tx_timeout ...
- // set_multicast_list
- SET_ETHTOOL_OPS(net, &ops);
+ /* device descriptor strings: manufacturer, product */
+ snprintf(manufacturer, sizeof manufacturer, "%s %s with %s",
+ init_utsname()->sysname, init_utsname()->release,
+ gadget->name);
+ status = usb_string_id(cdev);
+ if (status < 0)
+ goto fail;
+ strings_dev[STRING_MANUFACTURER_IDX].id = status;
+ device_desc.iManufacturer = status;
- /* preallocate control message data and buffer */
- dev->req = eth_req_alloc (gadget->ep0, USB_BUFSIZ, GFP_KERNEL);
- if (!dev->req)
+ status = usb_string_id(cdev);
+ if (status < 0)
goto fail;
- dev->req->complete = eth_setup_complete;
+ strings_dev[STRING_PRODUCT_IDX].id = status;
+ device_desc.iProduct = status;
- /* ... and maybe likewise for status transfer */
-#if defined(DEV_CONFIG_CDC) || defined(CONFIG_USB_ETH_RNDIS)
- if (dev->status_ep) {
- dev->stat_req = eth_req_alloc (dev->status_ep,
- STATUS_BYTECOUNT, GFP_KERNEL);
- if (!dev->stat_req) {
- eth_req_free (gadget->ep0, dev->req);
+ /* register our configuration(s); RNDIS first, if it's used */
+ if (has_rndis()) {
+ status = usb_add_config(cdev, &rndis_config_driver);
+ if (status < 0)
goto fail;
- }
- dev->stat_req->context = NULL;
}
-#endif
-
- /* finish hookup to lower layer ... */
- dev->gadget = gadget;
- set_gadget_data (gadget, dev);
- gadget->ep0->driver_data = dev;
- /* two kinds of host-initiated state changes:
- * - iff DATA transfer is active, carrier is "on"
- * - tx queueing enabled if open *and* carrier is "on"
- */
- netif_stop_queue (dev->net);
- netif_carrier_off (dev->net);
-
- SET_NETDEV_DEV (dev->net, &gadget->dev);
- status = register_netdev (dev->net);
+ status = usb_add_config(cdev, &eth_config_driver);
if (status < 0)
- goto fail1;
-
- INFO (dev, "%s, version: " DRIVER_VERSION "\n", driver_desc);
- INFO (dev, "using %s, OUT %s IN %s%s%s\n", gadget->name,
- out_ep->name, in_ep->name,
- status_ep ? " STATUS " : "",
- status_ep ? status_ep->name : ""
- );
- INFO (dev, "MAC %02x:%02x:%02x:%02x:%02x:%02x\n",
- net->dev_addr [0], net->dev_addr [1],
- net->dev_addr [2], net->dev_addr [3],
- net->dev_addr [4], net->dev_addr [5]);
-
- if (cdc || rndis)
- INFO (dev, "HOST MAC %02x:%02x:%02x:%02x:%02x:%02x\n",
- dev->host_mac [0], dev->host_mac [1],
- dev->host_mac [2], dev->host_mac [3],
- dev->host_mac [4], dev->host_mac [5]);
-
- if (rndis) {
- u32 vendorID = 0;
-
- /* FIXME RNDIS vendor id == "vendor NIC code" == ? */
-
- dev->rndis_config = rndis_register (rndis_control_ack);
- if (dev->rndis_config < 0) {
-fail0:
- unregister_netdev (dev->net);
- status = -ENODEV;
- goto fail;
- }
+ goto fail;
- /* these set up a lot of the OIDs that RNDIS needs */
- rndis_set_host_mac (dev->rndis_config, dev->host_mac);
- if (rndis_set_param_dev (dev->rndis_config, dev->net,
- &dev->stats, &dev->cdc_filter))
- goto fail0;
- if (rndis_set_param_vendor(dev->rndis_config, vendorID,
- manufacturer))
- goto fail0;
- if (rndis_set_param_medium(dev->rndis_config,
- NDIS_MEDIUM_802_3, 0))
- goto fail0;
- INFO (dev, "RNDIS ready\n");
- }
+ INFO(cdev, "%s, version: " DRIVER_VERSION "\n", DRIVER_DESC);
- return status;
+ return 0;
-fail1:
- dev_dbg(&gadget->dev, "register_netdev failed, %d\n", status);
fail:
- eth_unbind (gadget);
+ gether_cleanup();
return status;
}
-/*-------------------------------------------------------------------------*/
-
-static void
-eth_suspend (struct usb_gadget *gadget)
-{
- struct eth_dev *dev = get_gadget_data (gadget);
-
- DEBUG (dev, "suspend\n");
- dev->suspended = 1;
-}
-
-static void
-eth_resume (struct usb_gadget *gadget)
+static int __exit eth_unbind(struct usb_composite_dev *cdev)
{
- struct eth_dev *dev = get_gadget_data (gadget);
-
- DEBUG (dev, "resume\n");
- dev->suspended = 0;
+ gether_cleanup();
+ return 0;
}
-/*-------------------------------------------------------------------------*/
-
-static struct usb_gadget_driver eth_driver = {
- .speed = DEVSPEED,
-
- .function = (char *) driver_desc,
+static struct usb_composite_driver eth_driver = {
+ .name = "g_ether",
+ .dev = &device_desc,
+ .strings = dev_strings,
.bind = eth_bind,
- .unbind = eth_unbind,
-
- .setup = eth_setup,
- .disconnect = eth_disconnect,
-
- .suspend = eth_suspend,
- .resume = eth_resume,
-
- .driver = {
- .name = (char *) shortname,
- .owner = THIS_MODULE,
- },
+ .unbind = __exit_p(eth_unbind),
};
-MODULE_DESCRIPTION (DRIVER_DESC);
-MODULE_AUTHOR ("David Brownell, Benedikt Spanger");
-MODULE_LICENSE ("GPL");
+MODULE_DESCRIPTION(PREFIX DRIVER_DESC);
+MODULE_AUTHOR("David Brownell, Benedikt Spanger");
+MODULE_LICENSE("GPL");
-
-static int __init init (void)
+static int __init init(void)
{
- return usb_gadget_register_driver (&eth_driver);
+ return usb_composite_register(&eth_driver);
}
-module_init (init);
+module_init(init);
-static void __exit cleanup (void)
+static void __exit cleanup(void)
{
- usb_gadget_unregister_driver (&eth_driver);
+ usb_composite_unregister(&eth_driver);
}
-module_exit (cleanup);
-
+module_exit(cleanup);
diff --git a/drivers/usb/gadget/f_acm.c b/drivers/usb/gadget/f_acm.c
new file mode 100644
index 00000000000..d8faccf2789
--- /dev/null
+++ b/drivers/usb/gadget/f_acm.c
@@ -0,0 +1,589 @@
+/*
+ * f_acm.c -- USB CDC serial (ACM) function driver
+ *
+ * Copyright (C) 2003 Al Borchers (alborchers@steinerpoint.com)
+ * Copyright (C) 2008 by David Brownell
+ * Copyright (C) 2008 by Nokia Corporation
+ *
+ * This software is distributed under the terms of the GNU General
+ * Public License ("GPL") as published by the Free Software Foundation,
+ * either version 2 of that License or (at your option) any later version.
+ */
+
+/* #define VERBOSE_DEBUG */
+
+#include <linux/kernel.h>
+#include <linux/device.h>
+
+#include "u_serial.h"
+#include "gadget_chips.h"
+
+
+/*
+ * This CDC ACM function support just wraps control functions and
+ * notifications around the generic serial-over-usb code.
+ *
+ * Because CDC ACM is standardized by the USB-IF, many host operating
+ * systems have drivers for it. Accordingly, ACM is the preferred
+ * interop solution for serial-port type connections. The control
+ * models are often not necessary, and in any case don't do much in
+ * this bare-bones implementation.
+ *
+ * Note that even MS-Windows has some support for ACM. However, that
+ * support is somewhat broken because when you use ACM in a composite
+ * device, having multiple interfaces confuses the poor OS. It doesn't
+ * seem to understand CDC Union descriptors. The new "association"
+ * descriptors (roughly equivalent to CDC Unions) may sometimes help.
+ */
+
+struct acm_ep_descs {
+ struct usb_endpoint_descriptor *in;
+ struct usb_endpoint_descriptor *out;
+ struct usb_endpoint_descriptor *notify;
+};
+
+struct f_acm {
+ struct gserial port;
+ u8 ctrl_id, data_id;
+ u8 port_num;
+
+ struct usb_descriptor_header **fs_function;
+ struct acm_ep_descs fs;
+ struct usb_descriptor_header **hs_function;
+ struct acm_ep_descs hs;
+
+ struct usb_ep *notify;
+ struct usb_endpoint_descriptor *notify_desc;
+
+ struct usb_cdc_line_coding port_line_coding; /* 8-N-1 etc */
+ u16 port_handshake_bits;
+#define RS232_RTS (1 << 1) /* unused with full duplex */
+#define RS232_DTR (1 << 0) /* host is ready for data r/w */
+};
+
+static inline struct f_acm *func_to_acm(struct usb_function *f)
+{
+ return container_of(f, struct f_acm, port.func);
+}
+
+/*-------------------------------------------------------------------------*/
+
+/* notification endpoint uses smallish and infrequent fixed-size messages */
+
+#define GS_LOG2_NOTIFY_INTERVAL 5 /* 1 << 5 == 32 msec */
+#define GS_NOTIFY_MAXPACKET 8
+
+/* interface and class descriptors: */
+
+static struct usb_interface_descriptor acm_control_interface_desc __initdata = {
+ .bLength = USB_DT_INTERFACE_SIZE,
+ .bDescriptorType = USB_DT_INTERFACE,
+ /* .bInterfaceNumber = DYNAMIC */
+ .bNumEndpoints = 1,
+ .bInterfaceClass = USB_CLASS_COMM,
+ .bInterfaceSubClass = USB_CDC_SUBCLASS_ACM,
+ .bInterfaceProtocol = USB_CDC_ACM_PROTO_AT_V25TER,
+ /* .iInterface = DYNAMIC */
+};
+
+static struct usb_interface_descriptor acm_data_interface_desc __initdata = {
+ .bLength = USB_DT_INTERFACE_SIZE,
+ .bDescriptorType = USB_DT_INTERFACE,
+ /* .bInterfaceNumber = DYNAMIC */
+ .bNumEndpoints = 2,
+ .bInterfaceClass = USB_CLASS_CDC_DATA,
+ .bInterfaceSubClass = 0,
+ .bInterfaceProtocol = 0,
+ /* .iInterface = DYNAMIC */
+};
+
+static struct usb_cdc_header_desc acm_header_desc __initdata = {
+ .bLength = sizeof(acm_header_desc),
+ .bDescriptorType = USB_DT_CS_INTERFACE,
+ .bDescriptorSubType = USB_CDC_HEADER_TYPE,
+ .bcdCDC = __constant_cpu_to_le16(0x0110),
+};
+
+static struct usb_cdc_call_mgmt_descriptor
+acm_call_mgmt_descriptor __initdata = {
+ .bLength = sizeof(acm_call_mgmt_descriptor),
+ .bDescriptorType = USB_DT_CS_INTERFACE,
+ .bDescriptorSubType = USB_CDC_CALL_MANAGEMENT_TYPE,
+ .bmCapabilities = 0,
+ /* .bDataInterface = DYNAMIC */
+};
+
+static struct usb_cdc_acm_descriptor acm_descriptor __initdata = {
+ .bLength = sizeof(acm_descriptor),
+ .bDescriptorType = USB_DT_CS_INTERFACE,
+ .bDescriptorSubType = USB_CDC_ACM_TYPE,
+ .bmCapabilities = (1 << 1),
+};
+
+static struct usb_cdc_union_desc acm_union_desc __initdata = {
+ .bLength = sizeof(acm_union_desc),
+ .bDescriptorType = USB_DT_CS_INTERFACE,
+ .bDescriptorSubType = USB_CDC_UNION_TYPE,
+ /* .bMasterInterface0 = DYNAMIC */
+ /* .bSlaveInterface0 = DYNAMIC */
+};
+
+/* full speed support: */
+
+static struct usb_endpoint_descriptor acm_fs_notify_desc __initdata = {
+ .bLength = USB_DT_ENDPOINT_SIZE,
+ .bDescriptorType = USB_DT_ENDPOINT,
+ .bEndpointAddress = USB_DIR_IN,
+ .bmAttributes = USB_ENDPOINT_XFER_INT,
+ .wMaxPacketSize = __constant_cpu_to_le16(GS_NOTIFY_MAXPACKET),
+ .bInterval = 1 << GS_LOG2_NOTIFY_INTERVAL,
+};
+
+static struct usb_endpoint_descriptor acm_fs_in_desc __initdata = {
+ .bLength = USB_DT_ENDPOINT_SIZE,
+ .bDescriptorType = USB_DT_ENDPOINT,
+ .bEndpointAddress = USB_DIR_IN,
+ .bmAttributes = USB_ENDPOINT_XFER_BULK,
+};
+
+static struct usb_endpoint_descriptor acm_fs_out_desc __initdata = {
+ .bLength = USB_DT_ENDPOINT_SIZE,
+ .bDescriptorType = USB_DT_ENDPOINT,
+ .bEndpointAddress = USB_DIR_OUT,
+ .bmAttributes = USB_ENDPOINT_XFER_BULK,
+};
+
+static struct usb_descriptor_header *acm_fs_function[] __initdata = {
+ (struct usb_descriptor_header *) &acm_control_interface_desc,
+ (struct usb_descriptor_header *) &acm_header_desc,
+ (struct usb_descriptor_header *) &acm_call_mgmt_descriptor,
+ (struct usb_descriptor_header *) &acm_descriptor,
+ (struct usb_descriptor_header *) &acm_union_desc,
+ (struct usb_descriptor_header *) &acm_fs_notify_desc,
+ (struct usb_descriptor_header *) &acm_data_interface_desc,
+ (struct usb_descriptor_header *) &acm_fs_in_desc,
+ (struct usb_descriptor_header *) &acm_fs_out_desc,
+ NULL,
+};
+
+/* high speed support: */
+
+static struct usb_endpoint_descriptor acm_hs_notify_desc __initdata = {
+ .bLength = USB_DT_ENDPOINT_SIZE,
+ .bDescriptorType = USB_DT_ENDPOINT,
+ .bEndpointAddress = USB_DIR_IN,
+ .bmAttributes = USB_ENDPOINT_XFER_INT,
+ .wMaxPacketSize = __constant_cpu_to_le16(GS_NOTIFY_MAXPACKET),
+ .bInterval = GS_LOG2_NOTIFY_INTERVAL+4,
+};
+
+static struct usb_endpoint_descriptor acm_hs_in_desc __initdata = {
+ .bLength = USB_DT_ENDPOINT_SIZE,
+ .bDescriptorType = USB_DT_ENDPOINT,
+ .bmAttributes = USB_ENDPOINT_XFER_BULK,
+ .wMaxPacketSize = __constant_cpu_to_le16(512),
+};
+
+static struct usb_endpoint_descriptor acm_hs_out_desc __initdata = {
+ .bLength = USB_DT_ENDPOINT_SIZE,
+ .bDescriptorType = USB_DT_ENDPOINT,
+ .bmAttributes = USB_ENDPOINT_XFER_BULK,
+ .wMaxPacketSize = __constant_cpu_to_le16(512),
+};
+
+static struct usb_descriptor_header *acm_hs_function[] __initdata = {
+ (struct usb_descriptor_header *) &acm_control_interface_desc,
+ (struct usb_descriptor_header *) &acm_header_desc,
+ (struct usb_descriptor_header *) &acm_call_mgmt_descriptor,
+ (struct usb_descriptor_header *) &acm_descriptor,
+ (struct usb_descriptor_header *) &acm_union_desc,
+ (struct usb_descriptor_header *) &acm_hs_notify_desc,
+ (struct usb_descriptor_header *) &acm_data_interface_desc,
+ (struct usb_descriptor_header *) &acm_hs_in_desc,
+ (struct usb_descriptor_header *) &acm_hs_out_desc,
+ NULL,
+};
+
+/* string descriptors: */
+
+#define ACM_CTRL_IDX 0
+#define ACM_DATA_IDX 1
+
+/* static strings, in UTF-8 */
+static struct usb_string acm_string_defs[] = {
+ [ACM_CTRL_IDX].s = "CDC Abstract Control Model (ACM)",
+ [ACM_DATA_IDX].s = "CDC ACM Data",
+ { /* ZEROES END LIST */ },
+};
+
+static struct usb_gadget_strings acm_string_table = {
+ .language = 0x0409, /* en-us */
+ .strings = acm_string_defs,
+};
+
+static struct usb_gadget_strings *acm_strings[] = {
+ &acm_string_table,
+ NULL,
+};
+
+/*-------------------------------------------------------------------------*/
+
+/* ACM control ... data handling is delegated to tty library code.
+ * The main task of this function is to activate and deactivate
+ * that code based on device state; track parameters like line
+ * speed, handshake state, and so on; and issue notifications.
+ */
+
+static void acm_complete_set_line_coding(struct usb_ep *ep,
+ struct usb_request *req)
+{
+ struct f_acm *acm = ep->driver_data;
+ struct usb_composite_dev *cdev = acm->port.func.config->cdev;
+
+ if (req->status != 0) {
+ DBG(cdev, "acm ttyGS%d completion, err %d\n",
+ acm->port_num, req->status);
+ return;
+ }
+
+ /* normal completion */
+ if (req->actual != sizeof(acm->port_line_coding)) {
+ DBG(cdev, "acm ttyGS%d short resp, len %d\n",
+ acm->port_num, req->actual);
+ usb_ep_set_halt(ep);
+ } else {
+ struct usb_cdc_line_coding *value = req->buf;
+
+ /* REVISIT: we currently just remember this data.
+ * If we change that, (a) validate it first, then
+ * (b) update whatever hardware needs updating,
+ * (c) worry about locking. This is information on
+ * the order of 9600-8-N-1 ... most of which means
+ * nothing unless we control a real RS232 line.
+ */
+ acm->port_line_coding = *value;
+ }
+}
+
+static int acm_setup(struct usb_function *f, const struct usb_ctrlrequest *ctrl)
+{
+ struct f_acm *acm = func_to_acm(f);
+ struct usb_composite_dev *cdev = f->config->cdev;
+ struct usb_request *req = cdev->req;
+ int value = -EOPNOTSUPP;
+ u16 w_index = le16_to_cpu(ctrl->wIndex);
+ u16 w_value = le16_to_cpu(ctrl->wValue);
+ u16 w_length = le16_to_cpu(ctrl->wLength);
+
+ /* composite driver infrastructure handles everything except
+ * CDC class messages; interface activation uses set_alt().
+ */
+ switch ((ctrl->bRequestType << 8) | ctrl->bRequest) {
+
+ /* SET_LINE_CODING ... just read and save what the host sends */
+ case ((USB_DIR_OUT | USB_TYPE_CLASS | USB_RECIP_INTERFACE) << 8)
+ | USB_CDC_REQ_SET_LINE_CODING:
+ if (w_length != sizeof(struct usb_cdc_line_coding)
+ || w_index != acm->ctrl_id)
+ goto invalid;
+
+ value = w_length;
+ cdev->gadget->ep0->driver_data = acm;
+ req->complete = acm_complete_set_line_coding;
+ break;
+
+ /* GET_LINE_CODING ... return what host sent, or initial value */
+ case ((USB_DIR_IN | USB_TYPE_CLASS | USB_RECIP_INTERFACE) << 8)
+ | USB_CDC_REQ_GET_LINE_CODING:
+ if (w_index != acm->ctrl_id)
+ goto invalid;
+
+ value = min_t(unsigned, w_length,
+ sizeof(struct usb_cdc_line_coding));
+ memcpy(req->buf, &acm->port_line_coding, value);
+ break;
+
+ /* SET_CONTROL_LINE_STATE ... save what the host sent */
+ case ((USB_DIR_OUT | USB_TYPE_CLASS | USB_RECIP_INTERFACE) << 8)
+ | USB_CDC_REQ_SET_CONTROL_LINE_STATE:
+ if (w_index != acm->ctrl_id)
+ goto invalid;
+
+ value = 0;
+
+ /* FIXME we should not allow data to flow until the
+ * host sets the RS232_DTR bit; and when it clears
+ * that bit, we should return to that no-flow state.
+ */
+ acm->port_handshake_bits = w_value;
+ break;
+
+ default:
+invalid:
+ VDBG(cdev, "invalid control req%02x.%02x v%04x i%04x l%d\n",
+ ctrl->bRequestType, ctrl->bRequest,
+ w_value, w_index, w_length);
+ }
+
+ /* respond with data transfer or status phase? */
+ if (value >= 0) {
+ DBG(cdev, "acm ttyGS%d req%02x.%02x v%04x i%04x l%d\n",
+ acm->port_num, ctrl->bRequestType, ctrl->bRequest,
+ w_value, w_index, w_length);
+ req->zero = 0;
+ req->length = value;
+ value = usb_ep_queue(cdev->gadget->ep0, req, GFP_ATOMIC);
+ if (value < 0)
+ ERROR(cdev, "acm response on ttyGS%d, err %d\n",
+ acm->port_num, value);
+ }
+
+ /* device either stalls (value < 0) or reports success */
+ return value;
+}
+
+static int acm_set_alt(struct usb_function *f, unsigned intf, unsigned alt)
+{
+ struct f_acm *acm = func_to_acm(f);
+ struct usb_composite_dev *cdev = f->config->cdev;
+
+ /* we know alt == 0, so this is an activation or a reset */
+
+ if (intf == acm->ctrl_id) {
+ /* REVISIT this may need more work when we start to
+ * send notifications ...
+ */
+ if (acm->notify->driver_data) {
+ VDBG(cdev, "reset acm control interface %d\n", intf);
+ usb_ep_disable(acm->notify);
+ } else {
+ VDBG(cdev, "init acm ctrl interface %d\n", intf);
+ acm->notify_desc = ep_choose(cdev->gadget,
+ acm->hs.notify,
+ acm->fs.notify);
+ }
+ usb_ep_enable(acm->notify, acm->notify_desc);
+ acm->notify->driver_data = acm;
+
+ } else if (intf == acm->data_id) {
+ if (acm->port.in->driver_data) {
+ DBG(cdev, "reset acm ttyGS%d\n", acm->port_num);
+ gserial_disconnect(&acm->port);
+ } else {
+ DBG(cdev, "activate acm ttyGS%d\n", acm->port_num);
+ acm->port.in_desc = ep_choose(cdev->gadget,
+ acm->hs.in, acm->fs.in);
+ acm->port.out_desc = ep_choose(cdev->gadget,
+ acm->hs.out, acm->fs.out);
+ }
+ gserial_connect(&acm->port, acm->port_num);
+
+ } else
+ return -EINVAL;
+
+ return 0;
+}
+
+static void acm_disable(struct usb_function *f)
+{
+ struct f_acm *acm = func_to_acm(f);
+ struct usb_composite_dev *cdev = f->config->cdev;
+
+ DBG(cdev, "acm ttyGS%d deactivated\n", acm->port_num);
+ gserial_disconnect(&acm->port);
+ usb_ep_disable(acm->notify);
+ acm->notify->driver_data = NULL;
+}
+
+/*-------------------------------------------------------------------------*/
+
+/* ACM function driver setup/binding */
+static int __init
+acm_bind(struct usb_configuration *c, struct usb_function *f)
+{
+ struct usb_composite_dev *cdev = c->cdev;
+ struct f_acm *acm = func_to_acm(f);
+ int status;
+ struct usb_ep *ep;
+
+ /* allocate instance-specific interface IDs, and patch descriptors */
+ status = usb_interface_id(c, f);
+ if (status < 0)
+ goto fail;
+ acm->ctrl_id = status;
+
+ acm_control_interface_desc.bInterfaceNumber = status;
+ acm_union_desc .bMasterInterface0 = status;
+
+ status = usb_interface_id(c, f);
+ if (status < 0)
+ goto fail;
+ acm->data_id = status;
+
+ acm_data_interface_desc.bInterfaceNumber = status;
+ acm_union_desc.bSlaveInterface0 = status;
+ acm_call_mgmt_descriptor.bDataInterface = status;
+
+ status = -ENODEV;
+
+ /* allocate instance-specific endpoints */
+ ep = usb_ep_autoconfig(cdev->gadget, &acm_fs_in_desc);
+ if (!ep)
+ goto fail;
+ acm->port.in = ep;
+ ep->driver_data = cdev; /* claim */
+
+ ep = usb_ep_autoconfig(cdev->gadget, &acm_fs_out_desc);
+ if (!ep)
+ goto fail;
+ acm->port.out = ep;
+ ep->driver_data = cdev; /* claim */
+
+ ep = usb_ep_autoconfig(cdev->gadget, &acm_fs_notify_desc);
+ if (!ep)
+ goto fail;
+ acm->notify = ep;
+ ep->driver_data = cdev; /* claim */
+
+ /* copy descriptors, and track endpoint copies */
+ f->descriptors = usb_copy_descriptors(acm_fs_function);
+
+ acm->fs.in = usb_find_endpoint(acm_fs_function,
+ f->descriptors, &acm_fs_in_desc);
+ acm->fs.out = usb_find_endpoint(acm_fs_function,
+ f->descriptors, &acm_fs_out_desc);
+ acm->fs.notify = usb_find_endpoint(acm_fs_function,
+ f->descriptors, &acm_fs_notify_desc);
+
+ /* support all relevant hardware speeds... we expect that when
+ * hardware is dual speed, all bulk-capable endpoints work at
+ * both speeds
+ */
+ if (gadget_is_dualspeed(c->cdev->gadget)) {
+ acm_hs_in_desc.bEndpointAddress =
+ acm_fs_in_desc.bEndpointAddress;
+ acm_hs_out_desc.bEndpointAddress =
+ acm_fs_out_desc.bEndpointAddress;
+ acm_hs_notify_desc.bEndpointAddress =
+ acm_fs_notify_desc.bEndpointAddress;
+
+ /* copy descriptors, and track endpoint copies */
+ f->hs_descriptors = usb_copy_descriptors(acm_hs_function);
+
+ acm->hs.in = usb_find_endpoint(acm_hs_function,
+ f->hs_descriptors, &acm_hs_in_desc);
+ acm->hs.out = usb_find_endpoint(acm_hs_function,
+ f->hs_descriptors, &acm_hs_out_desc);
+ acm->hs.notify = usb_find_endpoint(acm_hs_function,
+ f->hs_descriptors, &acm_hs_notify_desc);
+ }
+
+ /* FIXME provide a callback for triggering notifications */
+
+ DBG(cdev, "acm ttyGS%d: %s speed IN/%s OUT/%s NOTIFY/%s\n",
+ acm->port_num,
+ gadget_is_dualspeed(c->cdev->gadget) ? "dual" : "full",
+ acm->port.in->name, acm->port.out->name,
+ acm->notify->name);
+ return 0;
+
+fail:
+ /* we might as well release our claims on endpoints */
+ if (acm->notify)
+ acm->notify->driver_data = NULL;
+ if (acm->port.out)
+ acm->port.out->driver_data = NULL;
+ if (acm->port.in)
+ acm->port.in->driver_data = NULL;
+
+ ERROR(cdev, "%s/%p: can't bind, err %d\n", f->name, f, status);
+
+ return status;
+}
+
+static void
+acm_unbind(struct usb_configuration *c, struct usb_function *f)
+{
+ if (gadget_is_dualspeed(c->cdev->gadget))
+ usb_free_descriptors(f->hs_descriptors);
+ usb_free_descriptors(f->descriptors);
+ kfree(func_to_acm(f));
+}
+
+/* Some controllers can't support CDC ACM ... */
+static inline bool can_support_cdc(struct usb_configuration *c)
+{
+ /* SH3 doesn't support multiple interfaces */
+ if (gadget_is_sh(c->cdev->gadget))
+ return false;
+
+ /* sa1100 doesn't have a third interrupt endpoint */
+ if (gadget_is_sa1100(c->cdev->gadget))
+ return false;
+
+ /* everything else is *probably* fine ... */
+ return true;
+}
+
+/**
+ * acm_bind_config - add a CDC ACM function to a configuration
+ * @c: the configuration to support the CDC ACM instance
+ * @port_num: /dev/ttyGS* port this interface will use
+ * Context: single threaded during gadget setup
+ *
+ * Returns zero on success, else negative errno.
+ *
+ * Caller must have called @gserial_setup() with enough ports to
+ * handle all the ones it binds. Caller is also responsible
+ * for calling @gserial_cleanup() before module unload.
+ */
+int __init acm_bind_config(struct usb_configuration *c, u8 port_num)
+{
+ struct f_acm *acm;
+ int status;
+
+ if (!can_support_cdc(c))
+ return -EINVAL;
+
+ /* REVISIT might want instance-specific strings to help
+ * distinguish instances ...
+ */
+
+ /* maybe allocate device-global string IDs, and patch descriptors */
+ if (acm_string_defs[ACM_CTRL_IDX].id == 0) {
+ status = usb_string_id(c->cdev);
+ if (status < 0)
+ return status;
+ acm_string_defs[ACM_CTRL_IDX].id = status;
+
+ acm_control_interface_desc.iInterface = status;
+
+ status = usb_string_id(c->cdev);
+ if (status < 0)
+ return status;
+ acm_string_defs[ACM_DATA_IDX].id = status;
+
+ acm_data_interface_desc.iInterface = status;
+ }
+
+ /* allocate and initialize one new instance */
+ acm = kzalloc(sizeof *acm, GFP_KERNEL);
+ if (!acm)
+ return -ENOMEM;
+
+ acm->port_num = port_num;
+
+ acm->port.func.name = "acm";
+ acm->port.func.strings = acm_strings;
+ /* descriptors are per-instance copies */
+ acm->port.func.bind = acm_bind;
+ acm->port.func.unbind = acm_unbind;
+ acm->port.func.set_alt = acm_set_alt;
+ acm->port.func.setup = acm_setup;
+ acm->port.func.disable = acm_disable;
+
+ status = usb_add_function(c, &acm->port.func);
+ if (status)
+ kfree(acm);
+ return status;
+}
diff --git a/drivers/usb/gadget/f_ecm.c b/drivers/usb/gadget/f_ecm.c
new file mode 100644
index 00000000000..0822e9d7693
--- /dev/null
+++ b/drivers/usb/gadget/f_ecm.c
@@ -0,0 +1,833 @@
+/*
+ * f_ecm.c -- USB CDC Ethernet (ECM) link function driver
+ *
+ * Copyright (C) 2003-2005,2008 David Brownell
+ * Copyright (C) 2008 Nokia Corporation
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
+ */
+
+/* #define VERBOSE_DEBUG */
+
+#include <linux/kernel.h>
+#include <linux/device.h>
+#include <linux/etherdevice.h>
+
+#include "u_ether.h"
+
+
+/*
+ * This function is a "CDC Ethernet Networking Control Model" (CDC ECM)
+ * Ethernet link. The data transfer model is simple (packets sent and
+ * received over bulk endpoints using normal short packet termination),
+ * and the control model exposes various data and optional notifications.
+ *
+ * ECM is well standardized and (except for Microsoft) supported by most
+ * operating systems with USB host support. It's the preferred interop
+ * solution for Ethernet over USB, at least for firmware based solutions.
+ * (Hardware solutions tend to be more minimalist.) A newer and simpler
+ * "Ethernet Emulation Model" (CDC EEM) hasn't yet caught on.
+ *
+ * Note that ECM requires the use of "alternate settings" for its data
+ * interface. This means that the set_alt() method has real work to do,
+ * and also means that a get_alt() method is required.
+ */
+
+struct ecm_ep_descs {
+ struct usb_endpoint_descriptor *in;
+ struct usb_endpoint_descriptor *out;
+ struct usb_endpoint_descriptor *notify;
+};
+
+enum ecm_notify_state {
+ ECM_NOTIFY_NONE, /* don't notify */
+ ECM_NOTIFY_CONNECT, /* issue CONNECT next */
+ ECM_NOTIFY_SPEED, /* issue SPEED_CHANGE next */
+};
+
+struct f_ecm {
+ struct gether port;
+ u8 ctrl_id, data_id;
+
+ char ethaddr[14];
+
+ struct usb_descriptor_header **fs_function;
+ struct ecm_ep_descs fs;
+ struct usb_descriptor_header **hs_function;
+ struct ecm_ep_descs hs;
+
+ struct usb_ep *notify;
+ struct usb_endpoint_descriptor *notify_desc;
+ struct usb_request *notify_req;
+ u8 notify_state;
+ bool is_open;
+
+ /* FIXME is_open needs some irq-ish locking
+ * ... possibly the same as port.ioport
+ */
+};
+
+static inline struct f_ecm *func_to_ecm(struct usb_function *f)
+{
+ return container_of(f, struct f_ecm, port.func);
+}
+
+/* peak (theoretical) bulk transfer rate in bits-per-second */
+static inline unsigned bitrate(struct usb_gadget *g)
+{
+ if (gadget_is_dualspeed(g) && g->speed == USB_SPEED_HIGH)
+ return 13 * 512 * 8 * 1000 * 8;
+ else
+ return 19 * 64 * 1 * 1000 * 8;
+}
+
+/*-------------------------------------------------------------------------*/
+
+/*
+ * Include the status endpoint if we can, even though it's optional.
+ *
+ * Use wMaxPacketSize big enough to fit CDC_NOTIFY_SPEED_CHANGE in one
+ * packet, to simplify cancellation; and a big transfer interval, to
+ * waste less bandwidth.
+ *
+ * Some drivers (like Linux 2.4 cdc-ether!) "need" it to exist even
+ * if they ignore the connect/disconnect notifications that real aether
+ * can provide. More advanced cdc configurations might want to support
+ * encapsulated commands (vendor-specific, using control-OUT).
+ */
+
+#define LOG2_STATUS_INTERVAL_MSEC 5 /* 1 << 5 == 32 msec */
+#define STATUS_BYTECOUNT 16 /* 8 byte header + data */
+
+
+/* interface descriptor: */
+
+static struct usb_interface_descriptor ecm_control_intf __initdata = {
+ .bLength = sizeof ecm_control_intf,
+ .bDescriptorType = USB_DT_INTERFACE,
+
+ /* .bInterfaceNumber = DYNAMIC */
+ /* status endpoint is optional; this could be patched later */
+ .bNumEndpoints = 1,
+ .bInterfaceClass = USB_CLASS_COMM,
+ .bInterfaceSubClass = USB_CDC_SUBCLASS_ETHERNET,
+ .bInterfaceProtocol = USB_CDC_PROTO_NONE,
+ /* .iInterface = DYNAMIC */
+};
+
+static struct usb_cdc_header_desc header_desc __initdata = {
+ .bLength = sizeof header_desc,
+ .bDescriptorType = USB_DT_CS_INTERFACE,
+ .bDescriptorSubType = USB_CDC_HEADER_TYPE,
+
+ .bcdCDC = __constant_cpu_to_le16(0x0110),
+};
+
+static struct usb_cdc_union_desc ecm_union_desc __initdata = {
+ .bLength = sizeof(ecm_union_desc),
+ .bDescriptorType = USB_DT_CS_INTERFACE,
+ .bDescriptorSubType = USB_CDC_UNION_TYPE,
+ /* .bMasterInterface0 = DYNAMIC */
+ /* .bSlaveInterface0 = DYNAMIC */
+};
+
+static struct usb_cdc_ether_desc ether_desc __initdata = {
+ .bLength = sizeof ether_desc,
+ .bDescriptorType = USB_DT_CS_INTERFACE,
+ .bDescriptorSubType = USB_CDC_ETHERNET_TYPE,
+
+ /* this descriptor actually adds value, surprise! */
+ /* .iMACAddress = DYNAMIC */
+ .bmEthernetStatistics = __constant_cpu_to_le32(0), /* no statistics */
+ .wMaxSegmentSize = __constant_cpu_to_le16(ETH_FRAME_LEN),
+ .wNumberMCFilters = __constant_cpu_to_le16(0),
+ .bNumberPowerFilters = 0,
+};
+
+/* the default data interface has no endpoints ... */
+
+static struct usb_interface_descriptor ecm_data_nop_intf __initdata = {
+ .bLength = sizeof ecm_data_nop_intf,
+ .bDescriptorType = USB_DT_INTERFACE,
+
+ .bInterfaceNumber = 1,
+ .bAlternateSetting = 0,
+ .bNumEndpoints = 0,
+ .bInterfaceClass = USB_CLASS_CDC_DATA,
+ .bInterfaceSubClass = 0,
+ .bInterfaceProtocol = 0,
+ /* .iInterface = DYNAMIC */
+};
+
+/* ... but the "real" data interface has two bulk endpoints */
+
+static struct usb_interface_descriptor ecm_data_intf __initdata = {
+ .bLength = sizeof ecm_data_intf,
+ .bDescriptorType = USB_DT_INTERFACE,
+
+ .bInterfaceNumber = 1,
+ .bAlternateSetting = 1,
+ .bNumEndpoints = 2,
+ .bInterfaceClass = USB_CLASS_CDC_DATA,
+ .bInterfaceSubClass = 0,
+ .bInterfaceProtocol = 0,
+ /* .iInterface = DYNAMIC */
+};
+
+/* full speed support: */
+
+static struct usb_endpoint_descriptor fs_notify_desc __initdata = {
+ .bLength = USB_DT_ENDPOINT_SIZE,
+ .bDescriptorType = USB_DT_ENDPOINT,
+
+ .bEndpointAddress = USB_DIR_IN,
+ .bmAttributes = USB_ENDPOINT_XFER_INT,
+ .wMaxPacketSize = __constant_cpu_to_le16(STATUS_BYTECOUNT),
+ .bInterval = 1 << LOG2_STATUS_INTERVAL_MSEC,
+};
+
+static struct usb_endpoint_descriptor fs_in_desc __initdata = {
+ .bLength = USB_DT_ENDPOINT_SIZE,
+ .bDescriptorType = USB_DT_ENDPOINT,
+
+ .bEndpointAddress = USB_DIR_IN,
+ .bmAttributes = USB_ENDPOINT_XFER_BULK,
+};
+
+static struct usb_endpoint_descriptor fs_out_desc __initdata = {
+ .bLength = USB_DT_ENDPOINT_SIZE,
+ .bDescriptorType = USB_DT_ENDPOINT,
+
+ .bEndpointAddress = USB_DIR_OUT,
+ .bmAttributes = USB_ENDPOINT_XFER_BULK,
+};
+
+static struct usb_descriptor_header *eth_fs_function[] __initdata = {
+ /* CDC ECM control descriptors */
+ (struct usb_descriptor_header *) &ecm_control_intf,
+ (struct usb_descriptor_header *) &header_desc,
+ (struct usb_descriptor_header *) &ecm_union_desc,
+ (struct usb_descriptor_header *) &ether_desc,
+ /* NOTE: status endpoint might need to be removed */
+ (struct usb_descriptor_header *) &fs_notify_desc,
+ /* data interface, altsettings 0 and 1 */
+ (struct usb_descriptor_header *) &ecm_data_nop_intf,
+ (struct usb_descriptor_header *) &ecm_data_intf,
+ (struct usb_descriptor_header *) &fs_in_desc,
+ (struct usb_descriptor_header *) &fs_out_desc,
+ NULL,
+};
+
+/* high speed support: */
+
+static struct usb_endpoint_descriptor hs_notify_desc __initdata = {
+ .bLength = USB_DT_ENDPOINT_SIZE,
+ .bDescriptorType = USB_DT_ENDPOINT,
+
+ .bEndpointAddress = USB_DIR_IN,
+ .bmAttributes = USB_ENDPOINT_XFER_INT,
+ .wMaxPacketSize = __constant_cpu_to_le16(STATUS_BYTECOUNT),
+ .bInterval = LOG2_STATUS_INTERVAL_MSEC + 4,
+};
+static struct usb_endpoint_descriptor hs_in_desc __initdata = {
+ .bLength = USB_DT_ENDPOINT_SIZE,
+ .bDescriptorType = USB_DT_ENDPOINT,
+
+ .bEndpointAddress = USB_DIR_IN,
+ .bmAttributes = USB_ENDPOINT_XFER_BULK,
+ .wMaxPacketSize = __constant_cpu_to_le16(512),
+};
+
+static struct usb_endpoint_descriptor hs_out_desc __initdata = {
+ .bLength = USB_DT_ENDPOINT_SIZE,
+ .bDescriptorType = USB_DT_ENDPOINT,
+
+ .bEndpointAddress = USB_DIR_OUT,
+ .bmAttributes = USB_ENDPOINT_XFER_BULK,
+ .wMaxPacketSize = __constant_cpu_to_le16(512),
+};
+
+static struct usb_descriptor_header *eth_hs_function[] __initdata = {
+ /* CDC ECM control descriptors */
+ (struct usb_descriptor_header *) &ecm_control_intf,
+ (struct usb_descriptor_header *) &header_desc,
+ (struct usb_descriptor_header *) &ecm_union_desc,
+ (struct usb_descriptor_header *) &ether_desc,
+ /* NOTE: status endpoint might need to be removed */
+ (struct usb_descriptor_header *) &hs_notify_desc,
+ /* data interface, altsettings 0 and 1 */
+ (struct usb_descriptor_header *) &ecm_data_nop_intf,
+ (struct usb_descriptor_header *) &ecm_data_intf,
+ (struct usb_descriptor_header *) &hs_in_desc,
+ (struct usb_descriptor_header *) &hs_out_desc,
+ NULL,
+};
+
+/* string descriptors: */
+
+static struct usb_string ecm_string_defs[] = {
+ [0].s = "CDC Ethernet Control Model (ECM)",
+ [1].s = NULL /* DYNAMIC */,
+ [2].s = "CDC Ethernet Data",
+ { } /* end of list */
+};
+
+static struct usb_gadget_strings ecm_string_table = {
+ .language = 0x0409, /* en-us */
+ .strings = ecm_string_defs,
+};
+
+static struct usb_gadget_strings *ecm_strings[] = {
+ &ecm_string_table,
+ NULL,
+};
+
+/*-------------------------------------------------------------------------*/
+
+static void ecm_do_notify(struct f_ecm *ecm)
+{
+ struct usb_request *req = ecm->notify_req;
+ struct usb_cdc_notification *event;
+ struct usb_composite_dev *cdev = ecm->port.func.config->cdev;
+ __le32 *data;
+ int status;
+
+ /* notification already in flight? */
+ if (!req)
+ return;
+
+ event = req->buf;
+ switch (ecm->notify_state) {
+ case ECM_NOTIFY_NONE:
+ return;
+
+ case ECM_NOTIFY_CONNECT:
+ event->bNotificationType = USB_CDC_NOTIFY_NETWORK_CONNECTION;
+ if (ecm->is_open)
+ event->wValue = cpu_to_le16(1);
+ else
+ event->wValue = cpu_to_le16(0);
+ event->wLength = 0;
+ req->length = sizeof *event;
+
+ DBG(cdev, "notify connect %s\n",
+ ecm->is_open ? "true" : "false");
+ ecm->notify_state = ECM_NOTIFY_SPEED;
+ break;
+
+ case ECM_NOTIFY_SPEED:
+ event->bNotificationType = USB_CDC_NOTIFY_SPEED_CHANGE;
+ event->wValue = cpu_to_le16(0);
+ event->wLength = cpu_to_le16(8);
+ req->length = STATUS_BYTECOUNT;
+
+ /* SPEED_CHANGE data is up/down speeds in bits/sec */
+ data = req->buf + sizeof *event;
+ data[0] = cpu_to_le32(bitrate(cdev->gadget));
+ data[1] = data[0];
+
+ DBG(cdev, "notify speed %d\n", bitrate(cdev->gadget));
+ ecm->notify_state = ECM_NOTIFY_NONE;
+ break;
+ }
+ event->bmRequestType = 0xA1;
+ event->wIndex = cpu_to_le16(ecm->ctrl_id);
+
+ ecm->notify_req = NULL;
+ status = usb_ep_queue(ecm->notify, req, GFP_ATOMIC);
+ if (status < 0) {
+ ecm->notify_req = req;
+ DBG(cdev, "notify --> %d\n", status);
+ }
+}
+
+static void ecm_notify(struct f_ecm *ecm)
+{
+ /* NOTE on most versions of Linux, host side cdc-ethernet
+ * won't listen for notifications until its netdevice opens.
+ * The first notification then sits in the FIFO for a long
+ * time, and the second one is queued.
+ */
+ ecm->notify_state = ECM_NOTIFY_CONNECT;
+ ecm_do_notify(ecm);
+}
+
+static void ecm_notify_complete(struct usb_ep *ep, struct usb_request *req)
+{
+ struct f_ecm *ecm = req->context;
+ struct usb_composite_dev *cdev = ecm->port.func.config->cdev;
+ struct usb_cdc_notification *event = req->buf;
+
+ switch (req->status) {
+ case 0:
+ /* no fault */
+ break;
+ case -ECONNRESET:
+ case -ESHUTDOWN:
+ ecm->notify_state = ECM_NOTIFY_NONE;
+ break;
+ default:
+ DBG(cdev, "event %02x --> %d\n",
+ event->bNotificationType, req->status);
+ break;
+ }
+ ecm->notify_req = req;
+ ecm_do_notify(ecm);
+}
+
+static int ecm_setup(struct usb_function *f, const struct usb_ctrlrequest *ctrl)
+{
+ struct f_ecm *ecm = func_to_ecm(f);
+ struct usb_composite_dev *cdev = f->config->cdev;
+ struct usb_request *req = cdev->req;
+ int value = -EOPNOTSUPP;
+ u16 w_index = le16_to_cpu(ctrl->wIndex);
+ u16 w_value = le16_to_cpu(ctrl->wValue);
+ u16 w_length = le16_to_cpu(ctrl->wLength);
+
+ /* composite driver infrastructure handles everything except
+ * CDC class messages; interface activation uses set_alt().
+ */
+ switch ((ctrl->bRequestType << 8) | ctrl->bRequest) {
+ case ((USB_DIR_OUT | USB_TYPE_CLASS | USB_RECIP_INTERFACE) << 8)
+ | USB_CDC_SET_ETHERNET_PACKET_FILTER:
+ /* see 6.2.30: no data, wIndex = interface,
+ * wValue = packet filter bitmap
+ */
+ if (w_length != 0 || w_index != ecm->ctrl_id)
+ goto invalid;
+ DBG(cdev, "packet filter %02x\n", w_value);
+ /* REVISIT locking of cdc_filter. This assumes the UDC
+ * driver won't have a concurrent packet TX irq running on
+ * another CPU; or that if it does, this write is atomic...
+ */
+ ecm->port.cdc_filter = w_value;
+ value = 0;
+ break;
+
+ /* and optionally:
+ * case USB_CDC_SEND_ENCAPSULATED_COMMAND:
+ * case USB_CDC_GET_ENCAPSULATED_RESPONSE:
+ * case USB_CDC_SET_ETHERNET_MULTICAST_FILTERS:
+ * case USB_CDC_SET_ETHERNET_PM_PATTERN_FILTER:
+ * case USB_CDC_GET_ETHERNET_PM_PATTERN_FILTER:
+ * case USB_CDC_GET_ETHERNET_STATISTIC:
+ */
+
+ default:
+invalid:
+ DBG(cdev, "invalid control req%02x.%02x v%04x i%04x l%d\n",
+ ctrl->bRequestType, ctrl->bRequest,
+ w_value, w_index, w_length);
+ }
+
+ /* respond with data transfer or status phase? */
+ if (value >= 0) {
+ DBG(cdev, "ecm req%02x.%02x v%04x i%04x l%d\n",
+ ctrl->bRequestType, ctrl->bRequest,
+ w_value, w_index, w_length);
+ req->zero = 0;
+ req->length = value;
+ value = usb_ep_queue(cdev->gadget->ep0, req, GFP_ATOMIC);
+ if (value < 0)
+ ERROR(cdev, "ecm req %02x.%02x response err %d\n",
+ ctrl->bRequestType, ctrl->bRequest,
+ value);
+ }
+
+ /* device either stalls (value < 0) or reports success */
+ return value;
+}
+
+
+static int ecm_set_alt(struct usb_function *f, unsigned intf, unsigned alt)
+{
+ struct f_ecm *ecm = func_to_ecm(f);
+ struct usb_composite_dev *cdev = f->config->cdev;
+
+ /* Control interface has only altsetting 0 */
+ if (intf == ecm->ctrl_id) {
+ if (alt != 0)
+ goto fail;
+
+ if (ecm->notify->driver_data) {
+ VDBG(cdev, "reset ecm control %d\n", intf);
+ usb_ep_disable(ecm->notify);
+ } else {
+ VDBG(cdev, "init ecm ctrl %d\n", intf);
+ ecm->notify_desc = ep_choose(cdev->gadget,
+ ecm->hs.notify,
+ ecm->fs.notify);
+ }
+ usb_ep_enable(ecm->notify, ecm->notify_desc);
+ ecm->notify->driver_data = ecm;
+
+ /* Data interface has two altsettings, 0 and 1 */
+ } else if (intf == ecm->data_id) {
+ if (alt > 1)
+ goto fail;
+
+ if (ecm->port.in_ep->driver_data) {
+ DBG(cdev, "reset ecm\n");
+ gether_disconnect(&ecm->port);
+ }
+
+ if (!ecm->port.in) {
+ DBG(cdev, "init ecm\n");
+ ecm->port.in = ep_choose(cdev->gadget,
+ ecm->hs.in, ecm->fs.in);
+ ecm->port.out = ep_choose(cdev->gadget,
+ ecm->hs.out, ecm->fs.out);
+ }
+
+ /* CDC Ethernet only sends data in non-default altsettings.
+ * Changing altsettings resets filters, statistics, etc.
+ */
+ if (alt == 1) {
+ struct net_device *net;
+
+ /* Enable zlps by default for ECM conformance;
+ * override for musb_hdrc (avoids txdma ovhead)
+ * and sa1100 (can't).
+ */
+ ecm->port.is_zlp_ok = !(
+ gadget_is_sa1100(cdev->gadget)
+ || gadget_is_musbhdrc(cdev->gadget)
+ );
+ ecm->port.cdc_filter = DEFAULT_FILTER;
+ DBG(cdev, "activate ecm\n");
+ net = gether_connect(&ecm->port);
+ if (IS_ERR(net))
+ return PTR_ERR(net);
+ }
+
+ /* NOTE this can be a minor disagreement with the ECM spec,
+ * which says speed notifications will "always" follow
+ * connection notifications. But we allow one connect to
+ * follow another (if the first is in flight), and instead
+ * just guarantee that a speed notification is always sent.
+ */
+ ecm_notify(ecm);
+ } else
+ goto fail;
+
+ return 0;
+fail:
+ return -EINVAL;
+}
+
+/* Because the data interface supports multiple altsettings,
+ * this ECM function *MUST* implement a get_alt() method.
+ */
+static int ecm_get_alt(struct usb_function *f, unsigned intf)
+{
+ struct f_ecm *ecm = func_to_ecm(f);
+
+ if (intf == ecm->ctrl_id)
+ return 0;
+ return ecm->port.in_ep->driver_data ? 1 : 0;
+}
+
+static void ecm_disable(struct usb_function *f)
+{
+ struct f_ecm *ecm = func_to_ecm(f);
+ struct usb_composite_dev *cdev = f->config->cdev;
+
+ DBG(cdev, "ecm deactivated\n");
+
+ if (ecm->port.in_ep->driver_data)
+ gether_disconnect(&ecm->port);
+
+ if (ecm->notify->driver_data) {
+ usb_ep_disable(ecm->notify);
+ ecm->notify->driver_data = NULL;
+ ecm->notify_desc = NULL;
+ }
+}
+
+/*-------------------------------------------------------------------------*/
+
+/*
+ * Callbacks let us notify the host about connect/disconnect when the
+ * net device is opened or closed.
+ *
+ * For testing, note that link states on this side include both opened
+ * and closed variants of:
+ *
+ * - disconnected/unconfigured
+ * - configured but inactive (data alt 0)
+ * - configured and active (data alt 1)
+ *
+ * Each needs to be tested with unplug, rmmod, SET_CONFIGURATION, and
+ * SET_INTERFACE (altsetting). Remember also that "configured" doesn't
+ * imply the host is actually polling the notification endpoint, and
+ * likewise that "active" doesn't imply it's actually using the data
+ * endpoints for traffic.
+ */
+
+static void ecm_open(struct gether *geth)
+{
+ struct f_ecm *ecm = func_to_ecm(&geth->func);
+
+ DBG(ecm->port.func.config->cdev, "%s\n", __func__);
+
+ ecm->is_open = true;
+ ecm_notify(ecm);
+}
+
+static void ecm_close(struct gether *geth)
+{
+ struct f_ecm *ecm = func_to_ecm(&geth->func);
+
+ DBG(ecm->port.func.config->cdev, "%s\n", __func__);
+
+ ecm->is_open = false;
+ ecm_notify(ecm);
+}
+
+/*-------------------------------------------------------------------------*/
+
+/* ethernet function driver setup/binding */
+
+static int __init
+ecm_bind(struct usb_configuration *c, struct usb_function *f)
+{
+ struct usb_composite_dev *cdev = c->cdev;
+ struct f_ecm *ecm = func_to_ecm(f);
+ int status;
+ struct usb_ep *ep;
+
+ /* allocate instance-specific interface IDs */
+ status = usb_interface_id(c, f);
+ if (status < 0)
+ goto fail;
+ ecm->ctrl_id = status;
+
+ ecm_control_intf.bInterfaceNumber = status;
+ ecm_union_desc.bMasterInterface0 = status;
+
+ status = usb_interface_id(c, f);
+ if (status < 0)
+ goto fail;
+ ecm->data_id = status;
+
+ ecm_data_nop_intf.bInterfaceNumber = status;
+ ecm_data_intf.bInterfaceNumber = status;
+ ecm_union_desc.bSlaveInterface0 = status;
+
+ status = -ENODEV;
+
+ /* allocate instance-specific endpoints */
+ ep = usb_ep_autoconfig(cdev->gadget, &fs_in_desc);
+ if (!ep)
+ goto fail;
+ ecm->port.in_ep = ep;
+ ep->driver_data = cdev; /* claim */
+
+ ep = usb_ep_autoconfig(cdev->gadget, &fs_out_desc);
+ if (!ep)
+ goto fail;
+ ecm->port.out_ep = ep;
+ ep->driver_data = cdev; /* claim */
+
+ /* NOTE: a status/notification endpoint is *OPTIONAL* but we
+ * don't treat it that way. It's simpler, and some newer CDC
+ * profiles (wireless handsets) no longer treat it as optional.
+ */
+ ep = usb_ep_autoconfig(cdev->gadget, &fs_notify_desc);
+ if (!ep)
+ goto fail;
+ ecm->notify = ep;
+ ep->driver_data = cdev; /* claim */
+
+ status = -ENOMEM;
+
+ /* allocate notification request and buffer */
+ ecm->notify_req = usb_ep_alloc_request(ep, GFP_KERNEL);
+ if (!ecm->notify_req)
+ goto fail;
+ ecm->notify_req->buf = kmalloc(STATUS_BYTECOUNT, GFP_KERNEL);
+ if (!ecm->notify_req->buf)
+ goto fail;
+ ecm->notify_req->context = ecm;
+ ecm->notify_req->complete = ecm_notify_complete;
+
+ /* copy descriptors, and track endpoint copies */
+ f->descriptors = usb_copy_descriptors(eth_fs_function);
+ if (!f->descriptors)
+ goto fail;
+
+ ecm->fs.in = usb_find_endpoint(eth_fs_function,
+ f->descriptors, &fs_in_desc);
+ ecm->fs.out = usb_find_endpoint(eth_fs_function,
+ f->descriptors, &fs_out_desc);
+ ecm->fs.notify = usb_find_endpoint(eth_fs_function,
+ f->descriptors, &fs_notify_desc);
+
+ /* support all relevant hardware speeds... we expect that when
+ * hardware is dual speed, all bulk-capable endpoints work at
+ * both speeds
+ */
+ if (gadget_is_dualspeed(c->cdev->gadget)) {
+ hs_in_desc.bEndpointAddress =
+ fs_in_desc.bEndpointAddress;
+ hs_out_desc.bEndpointAddress =
+ fs_out_desc.bEndpointAddress;
+ hs_notify_desc.bEndpointAddress =
+ fs_notify_desc.bEndpointAddress;
+
+ /* copy descriptors, and track endpoint copies */
+ f->hs_descriptors = usb_copy_descriptors(eth_hs_function);
+ if (!f->hs_descriptors)
+ goto fail;
+
+ ecm->hs.in = usb_find_endpoint(eth_hs_function,
+ f->hs_descriptors, &hs_in_desc);
+ ecm->hs.out = usb_find_endpoint(eth_hs_function,
+ f->hs_descriptors, &hs_out_desc);
+ ecm->hs.notify = usb_find_endpoint(eth_hs_function,
+ f->hs_descriptors, &hs_notify_desc);
+ }
+
+ /* NOTE: all that is done without knowing or caring about
+ * the network link ... which is unavailable to this code
+ * until we're activated via set_alt().
+ */
+
+ ecm->port.open = ecm_open;
+ ecm->port.close = ecm_close;
+
+ DBG(cdev, "CDC Ethernet: %s speed IN/%s OUT/%s NOTIFY/%s\n",
+ gadget_is_dualspeed(c->cdev->gadget) ? "dual" : "full",
+ ecm->port.in_ep->name, ecm->port.out_ep->name,
+ ecm->notify->name);
+ return 0;
+
+fail:
+ if (f->descriptors)
+ usb_free_descriptors(f->descriptors);
+
+ if (ecm->notify_req) {
+ kfree(ecm->notify_req->buf);
+ usb_ep_free_request(ecm->notify, ecm->notify_req);
+ }
+
+ /* we might as well release our claims on endpoints */
+ if (ecm->notify)
+ ecm->notify->driver_data = NULL;
+ if (ecm->port.out)
+ ecm->port.out_ep->driver_data = NULL;
+ if (ecm->port.in)
+ ecm->port.in_ep->driver_data = NULL;
+
+ ERROR(cdev, "%s: can't bind, err %d\n", f->name, status);
+
+ return status;
+}
+
+static void
+ecm_unbind(struct usb_configuration *c, struct usb_function *f)
+{
+ struct f_ecm *ecm = func_to_ecm(f);
+
+ DBG(c->cdev, "ecm unbind\n");
+
+ if (gadget_is_dualspeed(c->cdev->gadget))
+ usb_free_descriptors(f->hs_descriptors);
+ usb_free_descriptors(f->descriptors);
+
+ kfree(ecm->notify_req->buf);
+ usb_ep_free_request(ecm->notify, ecm->notify_req);
+
+ ecm_string_defs[1].s = NULL;
+ kfree(ecm);
+}
+
+/**
+ * ecm_bind_config - add CDC Ethernet network link to a configuration
+ * @c: the configuration to support the network link
+ * @ethaddr: a buffer in which the ethernet address of the host side
+ * side of the link was recorded
+ * Context: single threaded during gadget setup
+ *
+ * Returns zero on success, else negative errno.
+ *
+ * Caller must have called @gether_setup(). Caller is also responsible
+ * for calling @gether_cleanup() before module unload.
+ */
+int __init ecm_bind_config(struct usb_configuration *c, u8 ethaddr[ETH_ALEN])
+{
+ struct f_ecm *ecm;
+ int status;
+
+ if (!can_support_ecm(c->cdev->gadget) || !ethaddr)
+ return -EINVAL;
+
+ /* maybe allocate device-global string IDs */
+ if (ecm_string_defs[0].id == 0) {
+
+ /* control interface label */
+ status = usb_string_id(c->cdev);
+ if (status < 0)
+ return status;
+ ecm_string_defs[0].id = status;
+ ecm_control_intf.iInterface = status;
+
+ /* data interface label */
+ status = usb_string_id(c->cdev);
+ if (status < 0)
+ return status;
+ ecm_string_defs[2].id = status;
+ ecm_data_intf.iInterface = status;
+
+ /* MAC address */
+ status = usb_string_id(c->cdev);
+ if (status < 0)
+ return status;
+ ecm_string_defs[1].id = status;
+ ether_desc.iMACAddress = status;
+ }
+
+ /* allocate and initialize one new instance */
+ ecm = kzalloc(sizeof *ecm, GFP_KERNEL);
+ if (!ecm)
+ return -ENOMEM;
+
+ /* export host's Ethernet address in CDC format */
+ snprintf(ecm->ethaddr, sizeof ecm->ethaddr,
+ "%02X%02X%02X%02X%02X%02X",
+ ethaddr[0], ethaddr[1], ethaddr[2],
+ ethaddr[3], ethaddr[4], ethaddr[5]);
+ ecm_string_defs[1].s = ecm->ethaddr;
+
+ ecm->port.cdc_filter = DEFAULT_FILTER;
+
+ ecm->port.func.name = "cdc_ethernet";
+ ecm->port.func.strings = ecm_strings;
+ /* descriptors are per-instance copies */
+ ecm->port.func.bind = ecm_bind;
+ ecm->port.func.unbind = ecm_unbind;
+ ecm->port.func.set_alt = ecm_set_alt;
+ ecm->port.func.get_alt = ecm_get_alt;
+ ecm->port.func.setup = ecm_setup;
+ ecm->port.func.disable = ecm_disable;
+
+ status = usb_add_function(c, &ecm->port.func);
+ if (status) {
+ ecm_string_defs[1].s = NULL;
+ kfree(ecm);
+ }
+ return status;
+}
diff --git a/drivers/usb/gadget/f_loopback.c b/drivers/usb/gadget/f_loopback.c
new file mode 100644
index 00000000000..eda4cde72c8
--- /dev/null
+++ b/drivers/usb/gadget/f_loopback.c
@@ -0,0 +1,381 @@
+/*
+ * f_loopback.c - USB peripheral loopback configuration driver
+ *
+ * Copyright (C) 2003-2008 David Brownell
+ * Copyright (C) 2008 by Nokia Corporation
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
+ */
+
+/* #define VERBOSE_DEBUG */
+
+#include <linux/kernel.h>
+#include <linux/utsname.h>
+#include <linux/device.h>
+
+#include "g_zero.h"
+#include "gadget_chips.h"
+
+
+/*
+ * LOOPBACK FUNCTION ... a testing vehicle for USB peripherals,
+ *
+ * This takes messages of various sizes written OUT to a device, and loops
+ * them back so they can be read IN from it. It has been used by certain
+ * test applications. It supports limited testing of data queueing logic.
+ *
+ *
+ * This is currently packaged as a configuration driver, which can't be
+ * combined with other functions to make composite devices. However, it
+ * can be combined with other independent configurations.
+ */
+struct f_loopback {
+ struct usb_function function;
+
+ struct usb_ep *in_ep;
+ struct usb_ep *out_ep;
+};
+
+static inline struct f_loopback *func_to_loop(struct usb_function *f)
+{
+ return container_of(f, struct f_loopback, function);
+}
+
+static unsigned qlen = 32;
+module_param(qlen, uint, 0);
+MODULE_PARM_DESC(qlenn, "depth of loopback queue");
+
+/*-------------------------------------------------------------------------*/
+
+static struct usb_interface_descriptor loopback_intf = {
+ .bLength = sizeof loopback_intf,
+ .bDescriptorType = USB_DT_INTERFACE,
+
+ .bNumEndpoints = 2,
+ .bInterfaceClass = USB_CLASS_VENDOR_SPEC,
+ /* .iInterface = DYNAMIC */
+};
+
+/* full speed support: */
+
+static struct usb_endpoint_descriptor fs_source_desc = {
+ .bLength = USB_DT_ENDPOINT_SIZE,
+ .bDescriptorType = USB_DT_ENDPOINT,
+
+ .bEndpointAddress = USB_DIR_IN,
+ .bmAttributes = USB_ENDPOINT_XFER_BULK,
+};
+
+static struct usb_endpoint_descriptor fs_sink_desc = {
+ .bLength = USB_DT_ENDPOINT_SIZE,
+ .bDescriptorType = USB_DT_ENDPOINT,
+
+ .bEndpointAddress = USB_DIR_OUT,
+ .bmAttributes = USB_ENDPOINT_XFER_BULK,
+};
+
+static struct usb_descriptor_header *fs_loopback_descs[] = {
+ (struct usb_descriptor_header *) &loopback_intf,
+ (struct usb_descriptor_header *) &fs_sink_desc,
+ (struct usb_descriptor_header *) &fs_source_desc,
+ NULL,
+};
+
+/* high speed support: */
+
+static struct usb_endpoint_descriptor hs_source_desc = {
+ .bLength = USB_DT_ENDPOINT_SIZE,
+ .bDescriptorType = USB_DT_ENDPOINT,
+
+ .bmAttributes = USB_ENDPOINT_XFER_BULK,
+ .wMaxPacketSize = __constant_cpu_to_le16(512),
+};
+
+static struct usb_endpoint_descriptor hs_sink_desc = {
+ .bLength = USB_DT_ENDPOINT_SIZE,
+ .bDescriptorType = USB_DT_ENDPOINT,
+
+ .bmAttributes = USB_ENDPOINT_XFER_BULK,
+ .wMaxPacketSize = __constant_cpu_to_le16(512),
+};
+
+static struct usb_descriptor_header *hs_loopback_descs[] = {
+ (struct usb_descriptor_header *) &loopback_intf,
+ (struct usb_descriptor_header *) &hs_source_desc,
+ (struct usb_descriptor_header *) &hs_sink_desc,
+ NULL,
+};
+
+/* function-specific strings: */
+
+static struct usb_string strings_loopback[] = {
+ [0].s = "loop input to output",
+ { } /* end of list */
+};
+
+static struct usb_gadget_strings stringtab_loop = {
+ .language = 0x0409, /* en-us */
+ .strings = strings_loopback,
+};
+
+static struct usb_gadget_strings *loopback_strings[] = {
+ &stringtab_loop,
+ NULL,
+};
+
+/*-------------------------------------------------------------------------*/
+
+static int __init
+loopback_bind(struct usb_configuration *c, struct usb_function *f)
+{
+ struct usb_composite_dev *cdev = c->cdev;
+ struct f_loopback *loop = func_to_loop(f);
+ int id;
+
+ /* allocate interface ID(s) */
+ id = usb_interface_id(c, f);
+ if (id < 0)
+ return id;
+ loopback_intf.bInterfaceNumber = id;
+
+ /* allocate endpoints */
+
+ loop->in_ep = usb_ep_autoconfig(cdev->gadget, &fs_source_desc);
+ if (!loop->in_ep) {
+autoconf_fail:
+ ERROR(cdev, "%s: can't autoconfigure on %s\n",
+ f->name, cdev->gadget->name);
+ return -ENODEV;
+ }
+ loop->in_ep->driver_data = cdev; /* claim */
+
+ loop->out_ep = usb_ep_autoconfig(cdev->gadget, &fs_sink_desc);
+ if (!loop->out_ep)
+ goto autoconf_fail;
+ loop->out_ep->driver_data = cdev; /* claim */
+
+ /* support high speed hardware */
+ if (gadget_is_dualspeed(c->cdev->gadget)) {
+ hs_source_desc.bEndpointAddress =
+ fs_source_desc.bEndpointAddress;
+ hs_sink_desc.bEndpointAddress =
+ fs_sink_desc.bEndpointAddress;
+ f->hs_descriptors = hs_loopback_descs;
+ }
+
+ DBG(cdev, "%s speed %s: IN/%s, OUT/%s\n",
+ gadget_is_dualspeed(c->cdev->gadget) ? "dual" : "full",
+ f->name, loop->in_ep->name, loop->out_ep->name);
+ return 0;
+}
+
+static void
+loopback_unbind(struct usb_configuration *c, struct usb_function *f)
+{
+ kfree(func_to_loop(f));
+}
+
+static void loopback_complete(struct usb_ep *ep, struct usb_request *req)
+{
+ struct f_loopback *loop = ep->driver_data;
+ struct usb_composite_dev *cdev = loop->function.config->cdev;
+ int status = req->status;
+
+ switch (status) {
+
+ case 0: /* normal completion? */
+ if (ep == loop->out_ep) {
+ /* loop this OUT packet back IN to the host */
+ req->zero = (req->actual < req->length);
+ req->length = req->actual;
+ status = usb_ep_queue(loop->in_ep, req, GFP_ATOMIC);
+ if (status == 0)
+ return;
+
+ /* "should never get here" */
+ ERROR(cdev, "can't loop %s to %s: %d\n",
+ ep->name, loop->in_ep->name,
+ status);
+ }
+
+ /* queue the buffer for some later OUT packet */
+ req->length = buflen;
+ status = usb_ep_queue(loop->out_ep, req, GFP_ATOMIC);
+ if (status == 0)
+ return;
+
+ /* "should never get here" */
+ /* FALLTHROUGH */
+
+ default:
+ ERROR(cdev, "%s loop complete --> %d, %d/%d\n", ep->name,
+ status, req->actual, req->length);
+ /* FALLTHROUGH */
+
+ /* NOTE: since this driver doesn't maintain an explicit record
+ * of requests it submitted (just maintains qlen count), we
+ * rely on the hardware driver to clean up on disconnect or
+ * endpoint disable.
+ */
+ case -ECONNABORTED: /* hardware forced ep reset */
+ case -ECONNRESET: /* request dequeued */
+ case -ESHUTDOWN: /* disconnect from host */
+ free_ep_req(ep, req);
+ return;
+ }
+}
+
+static void disable_loopback(struct f_loopback *loop)
+{
+ struct usb_composite_dev *cdev;
+
+ cdev = loop->function.config->cdev;
+ disable_endpoints(cdev, loop->in_ep, loop->out_ep);
+ VDBG(cdev, "%s disabled\n", loop->function.name);
+}
+
+static int
+enable_loopback(struct usb_composite_dev *cdev, struct f_loopback *loop)
+{
+ int result = 0;
+ const struct usb_endpoint_descriptor *src, *sink;
+ struct usb_ep *ep;
+ struct usb_request *req;
+ unsigned i;
+
+ src = ep_choose(cdev->gadget, &hs_source_desc, &fs_source_desc);
+ sink = ep_choose(cdev->gadget, &hs_sink_desc, &fs_sink_desc);
+
+ /* one endpoint writes data back IN to the host */
+ ep = loop->in_ep;
+ result = usb_ep_enable(ep, src);
+ if (result < 0)
+ return result;
+ ep->driver_data = loop;
+
+ /* one endpoint just reads OUT packets */
+ ep = loop->out_ep;
+ result = usb_ep_enable(ep, sink);
+ if (result < 0) {
+fail0:
+ ep = loop->in_ep;
+ usb_ep_disable(ep);
+ ep->driver_data = NULL;
+ return result;
+ }
+ ep->driver_data = loop;
+
+ /* allocate a bunch of read buffers and queue them all at once.
+ * we buffer at most 'qlen' transfers; fewer if any need more
+ * than 'buflen' bytes each.
+ */
+ for (i = 0; i < qlen && result == 0; i++) {
+ req = alloc_ep_req(ep);
+ if (req) {
+ req->complete = loopback_complete;
+ result = usb_ep_queue(ep, req, GFP_ATOMIC);
+ if (result)
+ ERROR(cdev, "%s queue req --> %d\n",
+ ep->name, result);
+ } else {
+ usb_ep_disable(ep);
+ ep->driver_data = NULL;
+ result = -ENOMEM;
+ goto fail0;
+ }
+ }
+
+ DBG(cdev, "%s enabled\n", loop->function.name);
+ return result;
+}
+
+static int loopback_set_alt(struct usb_function *f,
+ unsigned intf, unsigned alt)
+{
+ struct f_loopback *loop = func_to_loop(f);
+ struct usb_composite_dev *cdev = f->config->cdev;
+
+ /* we know alt is zero */
+ if (loop->in_ep->driver_data)
+ disable_loopback(loop);
+ return enable_loopback(cdev, loop);
+}
+
+static void loopback_disable(struct usb_function *f)
+{
+ struct f_loopback *loop = func_to_loop(f);
+
+ disable_loopback(loop);
+}
+
+/*-------------------------------------------------------------------------*/
+
+static int __init loopback_bind_config(struct usb_configuration *c)
+{
+ struct f_loopback *loop;
+ int status;
+
+ loop = kzalloc(sizeof *loop, GFP_KERNEL);
+ if (!loop)
+ return -ENOMEM;
+
+ loop->function.name = "loopback";
+ loop->function.descriptors = fs_loopback_descs;
+ loop->function.bind = loopback_bind;
+ loop->function.unbind = loopback_unbind;
+ loop->function.set_alt = loopback_set_alt;
+ loop->function.disable = loopback_disable;
+
+ status = usb_add_function(c, &loop->function);
+ if (status)
+ kfree(loop);
+ return status;
+}
+
+static struct usb_configuration loopback_driver = {
+ .label = "loopback",
+ .strings = loopback_strings,
+ .bind = loopback_bind_config,
+ .bConfigurationValue = 2,
+ .bmAttributes = USB_CONFIG_ATT_SELFPOWER,
+ .bMaxPower = 1, /* 2 mA, minimal */
+ /* .iConfiguration = DYNAMIC */
+};
+
+/**
+ * loopback_add - add a loopback testing configuration to a device
+ * @cdev: the device to support the loopback configuration
+ */
+int __init loopback_add(struct usb_composite_dev *cdev)
+{
+ int id;
+
+ /* allocate string ID(s) */
+ id = usb_string_id(cdev);
+ if (id < 0)
+ return id;
+ strings_loopback[0].id = id;
+
+ loopback_intf.iInterface = id;
+ loopback_driver.iConfiguration = id;
+
+ /* support OTG systems */
+ if (gadget_is_otg(cdev->gadget)) {
+ loopback_driver.descriptors = otg_desc;
+ loopback_driver.bmAttributes |= USB_CONFIG_ATT_WAKEUP;
+ }
+
+ return usb_add_config(cdev, &loopback_driver);
+}
diff --git a/drivers/usb/gadget/f_rndis.c b/drivers/usb/gadget/f_rndis.c
new file mode 100644
index 00000000000..61652f0f13f
--- /dev/null
+++ b/drivers/usb/gadget/f_rndis.c
@@ -0,0 +1,827 @@
+/*
+ * f_rndis.c -- RNDIS link function driver
+ *
+ * Copyright (C) 2003-2005,2008 David Brownell
+ * Copyright (C) 2003-2004 Robert Schwebel, Benedikt Spranger
+ * Copyright (C) 2008 Nokia Corporation
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
+ */
+
+/* #define VERBOSE_DEBUG */
+
+#include <linux/kernel.h>
+#include <linux/device.h>
+#include <linux/etherdevice.h>
+
+#include <asm/atomic.h>
+
+#include "u_ether.h"
+#include "rndis.h"
+
+
+/*
+ * This function is an RNDIS Ethernet port -- a Microsoft protocol that's
+ * been promoted instead of the standard CDC Ethernet. The published RNDIS
+ * spec is ambiguous, incomplete, and needlessly complex. Variants such as
+ * ActiveSync have even worse status in terms of specification.
+ *
+ * In short: it's a protocol controlled by (and for) Microsoft, not for an
+ * Open ecosystem or markets. Linux supports it *only* because Microsoft
+ * doesn't support the CDC Ethernet standard.
+ *
+ * The RNDIS data transfer model is complex, with multiple Ethernet packets
+ * per USB message, and out of band data. The control model is built around
+ * what's essentially an "RNDIS RPC" protocol. It's all wrapped in a CDC ACM
+ * (modem, not Ethernet) veneer, with those ACM descriptors being entirely
+ * useless (they're ignored). RNDIS expects to be the only function in its
+ * configuration, so it's no real help if you need composite devices; and
+ * it expects to be the first configuration too.
+ *
+ * There is a single technical advantage of RNDIS over CDC Ethernet, if you
+ * discount the fluff that its RPC can be made to deliver: it doesn't need
+ * a NOP altsetting for the data interface. That lets it work on some of the
+ * "so smart it's stupid" hardware which takes over configuration changes
+ * from the software, and adds restrictions like "no altsettings".
+ *
+ * Unfortunately MSFT's RNDIS drivers are buggy. They hang or oops, and
+ * have all sorts of contrary-to-specification oddities that can prevent
+ * them from working sanely. Since bugfixes (or accurate specs, letting
+ * Linux work around those bugs) are unlikely to ever come from MSFT, you
+ * may want to avoid using RNDIS on purely operational grounds.
+ *
+ * Omissions from the RNDIS 1.0 specification include:
+ *
+ * - Power management ... references data that's scattered around lots
+ * of other documentation, which is incorrect/incomplete there too.
+ *
+ * - There are various undocumented protocol requirements, like the need
+ * to send garbage in some control-OUT messages.
+ *
+ * - MS-Windows drivers sometimes emit undocumented requests.
+ */
+
+struct rndis_ep_descs {
+ struct usb_endpoint_descriptor *in;
+ struct usb_endpoint_descriptor *out;
+ struct usb_endpoint_descriptor *notify;
+};
+
+struct f_rndis {
+ struct gether port;
+ u8 ctrl_id, data_id;
+ u8 ethaddr[ETH_ALEN];
+ int config;
+
+ struct usb_descriptor_header **fs_function;
+ struct rndis_ep_descs fs;
+ struct usb_descriptor_header **hs_function;
+ struct rndis_ep_descs hs;
+
+ struct usb_ep *notify;
+ struct usb_endpoint_descriptor *notify_desc;
+ struct usb_request *notify_req;
+ atomic_t notify_count;
+};
+
+static inline struct f_rndis *func_to_rndis(struct usb_function *f)
+{
+ return container_of(f, struct f_rndis, port.func);
+}
+
+/* peak (theoretical) bulk transfer rate in bits-per-second */
+static unsigned int bitrate(struct usb_gadget *g)
+{
+ if (gadget_is_dualspeed(g) && g->speed == USB_SPEED_HIGH)
+ return 13 * 512 * 8 * 1000 * 8;
+ else
+ return 19 * 64 * 1 * 1000 * 8;
+}
+
+/*-------------------------------------------------------------------------*/
+
+/*
+ */
+
+#define LOG2_STATUS_INTERVAL_MSEC 5 /* 1 << 5 == 32 msec */
+#define STATUS_BYTECOUNT 8 /* 8 bytes data */
+
+
+/* interface descriptor: */
+
+static struct usb_interface_descriptor rndis_control_intf __initdata = {
+ .bLength = sizeof rndis_control_intf,
+ .bDescriptorType = USB_DT_INTERFACE,
+
+ /* .bInterfaceNumber = DYNAMIC */
+ /* status endpoint is optional; this could be patched later */
+ .bNumEndpoints = 1,
+ .bInterfaceClass = USB_CLASS_COMM,
+ .bInterfaceSubClass = USB_CDC_SUBCLASS_ACM,
+ .bInterfaceProtocol = USB_CDC_ACM_PROTO_VENDOR,
+ /* .iInterface = DYNAMIC */
+};
+
+static struct usb_cdc_header_desc header_desc __initdata = {
+ .bLength = sizeof header_desc,
+ .bDescriptorType = USB_DT_CS_INTERFACE,
+ .bDescriptorSubType = USB_CDC_HEADER_TYPE,
+
+ .bcdCDC = __constant_cpu_to_le16(0x0110),
+};
+
+static struct usb_cdc_call_mgmt_descriptor call_mgmt_descriptor __initdata = {
+ .bLength = sizeof call_mgmt_descriptor,
+ .bDescriptorType = USB_DT_CS_INTERFACE,
+ .bDescriptorSubType = USB_CDC_CALL_MANAGEMENT_TYPE,
+
+ .bmCapabilities = 0x00,
+ .bDataInterface = 0x01,
+};
+
+static struct usb_cdc_acm_descriptor acm_descriptor __initdata = {
+ .bLength = sizeof acm_descriptor,
+ .bDescriptorType = USB_DT_CS_INTERFACE,
+ .bDescriptorSubType = USB_CDC_ACM_TYPE,
+
+ .bmCapabilities = 0x00,
+};
+
+static struct usb_cdc_union_desc rndis_union_desc __initdata = {
+ .bLength = sizeof(rndis_union_desc),
+ .bDescriptorType = USB_DT_CS_INTERFACE,
+ .bDescriptorSubType = USB_CDC_UNION_TYPE,
+ /* .bMasterInterface0 = DYNAMIC */
+ /* .bSlaveInterface0 = DYNAMIC */
+};
+
+/* the data interface has two bulk endpoints */
+
+static struct usb_interface_descriptor rndis_data_intf __initdata = {
+ .bLength = sizeof rndis_data_intf,
+ .bDescriptorType = USB_DT_INTERFACE,
+
+ /* .bInterfaceNumber = DYNAMIC */
+ .bAlternateSetting = 1,
+ .bNumEndpoints = 2,
+ .bInterfaceClass = USB_CLASS_CDC_DATA,
+ .bInterfaceSubClass = 0,
+ .bInterfaceProtocol = 0,
+ /* .iInterface = DYNAMIC */
+};
+
+/* full speed support: */
+
+static struct usb_endpoint_descriptor fs_notify_desc __initdata = {
+ .bLength = USB_DT_ENDPOINT_SIZE,
+ .bDescriptorType = USB_DT_ENDPOINT,
+
+ .bEndpointAddress = USB_DIR_IN,
+ .bmAttributes = USB_ENDPOINT_XFER_INT,
+ .wMaxPacketSize = __constant_cpu_to_le16(STATUS_BYTECOUNT),
+ .bInterval = 1 << LOG2_STATUS_INTERVAL_MSEC,
+};
+
+static struct usb_endpoint_descriptor fs_in_desc __initdata = {
+ .bLength = USB_DT_ENDPOINT_SIZE,
+ .bDescriptorType = USB_DT_ENDPOINT,
+
+ .bEndpointAddress = USB_DIR_IN,
+ .bmAttributes = USB_ENDPOINT_XFER_BULK,
+};
+
+static struct usb_endpoint_descriptor fs_out_desc __initdata = {
+ .bLength = USB_DT_ENDPOINT_SIZE,
+ .bDescriptorType = USB_DT_ENDPOINT,
+
+ .bEndpointAddress = USB_DIR_OUT,
+ .bmAttributes = USB_ENDPOINT_XFER_BULK,
+};
+
+static struct usb_descriptor_header *eth_fs_function[] __initdata = {
+ /* control interface matches ACM, not Ethernet */
+ (struct usb_descriptor_header *) &rndis_control_intf,
+ (struct usb_descriptor_header *) &header_desc,
+ (struct usb_descriptor_header *) &call_mgmt_descriptor,
+ (struct usb_descriptor_header *) &acm_descriptor,
+ (struct usb_descriptor_header *) &rndis_union_desc,
+ (struct usb_descriptor_header *) &fs_notify_desc,
+ /* data interface has no altsetting */
+ (struct usb_descriptor_header *) &rndis_data_intf,
+ (struct usb_descriptor_header *) &fs_in_desc,
+ (struct usb_descriptor_header *) &fs_out_desc,
+ NULL,
+};
+
+/* high speed support: */
+
+static struct usb_endpoint_descriptor hs_notify_desc __initdata = {
+ .bLength = USB_DT_ENDPOINT_SIZE,
+ .bDescriptorType = USB_DT_ENDPOINT,
+
+ .bEndpointAddress = USB_DIR_IN,
+ .bmAttributes = USB_ENDPOINT_XFER_INT,
+ .wMaxPacketSize = __constant_cpu_to_le16(STATUS_BYTECOUNT),
+ .bInterval = LOG2_STATUS_INTERVAL_MSEC + 4,
+};
+static struct usb_endpoint_descriptor hs_in_desc __initdata = {
+ .bLength = USB_DT_ENDPOINT_SIZE,
+ .bDescriptorType = USB_DT_ENDPOINT,
+
+ .bEndpointAddress = USB_DIR_IN,
+ .bmAttributes = USB_ENDPOINT_XFER_BULK,
+ .wMaxPacketSize = __constant_cpu_to_le16(512),
+};
+
+static struct usb_endpoint_descriptor hs_out_desc __initdata = {
+ .bLength = USB_DT_ENDPOINT_SIZE,
+ .bDescriptorType = USB_DT_ENDPOINT,
+
+ .bEndpointAddress = USB_DIR_OUT,
+ .bmAttributes = USB_ENDPOINT_XFER_BULK,
+ .wMaxPacketSize = __constant_cpu_to_le16(512),
+};
+
+static struct usb_descriptor_header *eth_hs_function[] __initdata = {
+ /* control interface matches ACM, not Ethernet */
+ (struct usb_descriptor_header *) &rndis_control_intf,
+ (struct usb_descriptor_header *) &header_desc,
+ (struct usb_descriptor_header *) &call_mgmt_descriptor,
+ (struct usb_descriptor_header *) &acm_descriptor,
+ (struct usb_descriptor_header *) &rndis_union_desc,
+ (struct usb_descriptor_header *) &hs_notify_desc,
+ /* data interface has no altsetting */
+ (struct usb_descriptor_header *) &rndis_data_intf,
+ (struct usb_descriptor_header *) &hs_in_desc,
+ (struct usb_descriptor_header *) &hs_out_desc,
+ NULL,
+};
+
+/* string descriptors: */
+
+static struct usb_string rndis_string_defs[] = {
+ [0].s = "RNDIS Communications Control",
+ [1].s = "RNDIS Ethernet Data",
+ { } /* end of list */
+};
+
+static struct usb_gadget_strings rndis_string_table = {
+ .language = 0x0409, /* en-us */
+ .strings = rndis_string_defs,
+};
+
+static struct usb_gadget_strings *rndis_strings[] = {
+ &rndis_string_table,
+ NULL,
+};
+
+/*-------------------------------------------------------------------------*/
+
+static struct sk_buff *rndis_add_header(struct sk_buff *skb)
+{
+ skb = skb_realloc_headroom(skb, sizeof(struct rndis_packet_msg_type));
+ if (skb)
+ rndis_add_hdr(skb);
+ return skb;
+}
+
+static void rndis_response_available(void *_rndis)
+{
+ struct f_rndis *rndis = _rndis;
+ struct usb_request *req = rndis->notify_req;
+ struct usb_composite_dev *cdev = rndis->port.func.config->cdev;
+ __le32 *data = req->buf;
+ int status;
+
+ if (atomic_inc_return(&rndis->notify_count))
+ return;
+
+ /* Send RNDIS RESPONSE_AVAILABLE notification; a
+ * USB_CDC_NOTIFY_RESPONSE_AVAILABLE "should" work too
+ *
+ * This is the only notification defined by RNDIS.
+ */
+ data[0] = cpu_to_le32(1);
+ data[1] = cpu_to_le32(0);
+
+ status = usb_ep_queue(rndis->notify, req, GFP_ATOMIC);
+ if (status) {
+ atomic_dec(&rndis->notify_count);
+ DBG(cdev, "notify/0 --> %d\n", status);
+ }
+}
+
+static void rndis_response_complete(struct usb_ep *ep, struct usb_request *req)
+{
+ struct f_rndis *rndis = req->context;
+ struct usb_composite_dev *cdev = rndis->port.func.config->cdev;
+ int status = req->status;
+
+ /* after TX:
+ * - USB_CDC_GET_ENCAPSULATED_RESPONSE (ep0/control)
+ * - RNDIS_RESPONSE_AVAILABLE (status/irq)
+ */
+ switch (status) {
+ case -ECONNRESET:
+ case -ESHUTDOWN:
+ /* connection gone */
+ atomic_set(&rndis->notify_count, 0);
+ break;
+ default:
+ DBG(cdev, "RNDIS %s response error %d, %d/%d\n",
+ ep->name, status,
+ req->actual, req->length);
+ /* FALLTHROUGH */
+ case 0:
+ if (ep != rndis->notify)
+ break;
+
+ /* handle multiple pending RNDIS_RESPONSE_AVAILABLE
+ * notifications by resending until we're done
+ */
+ if (atomic_dec_and_test(&rndis->notify_count))
+ break;
+ status = usb_ep_queue(rndis->notify, req, GFP_ATOMIC);
+ if (status) {
+ atomic_dec(&rndis->notify_count);
+ DBG(cdev, "notify/1 --> %d\n", status);
+ }
+ break;
+ }
+}
+
+static void rndis_command_complete(struct usb_ep *ep, struct usb_request *req)
+{
+ struct f_rndis *rndis = req->context;
+ struct usb_composite_dev *cdev = rndis->port.func.config->cdev;
+ int status;
+
+ /* received RNDIS command from USB_CDC_SEND_ENCAPSULATED_COMMAND */
+// spin_lock(&dev->lock);
+ status = rndis_msg_parser(rndis->config, (u8 *) req->buf);
+ if (status < 0)
+ ERROR(cdev, "RNDIS command error %d, %d/%d\n",
+ status, req->actual, req->length);
+// spin_unlock(&dev->lock);
+}
+
+static int
+rndis_setup(struct usb_function *f, const struct usb_ctrlrequest *ctrl)
+{
+ struct f_rndis *rndis = func_to_rndis(f);
+ struct usb_composite_dev *cdev = f->config->cdev;
+ struct usb_request *req = cdev->req;
+ int value = -EOPNOTSUPP;
+ u16 w_index = le16_to_cpu(ctrl->wIndex);
+ u16 w_value = le16_to_cpu(ctrl->wValue);
+ u16 w_length = le16_to_cpu(ctrl->wLength);
+
+ /* composite driver infrastructure handles everything except
+ * CDC class messages; interface activation uses set_alt().
+ */
+ switch ((ctrl->bRequestType << 8) | ctrl->bRequest) {
+
+ /* RNDIS uses the CDC command encapsulation mechanism to implement
+ * an RPC scheme, with much getting/setting of attributes by OID.
+ */
+ case ((USB_DIR_OUT | USB_TYPE_CLASS | USB_RECIP_INTERFACE) << 8)
+ | USB_CDC_SEND_ENCAPSULATED_COMMAND:
+ if (w_length > req->length || w_value
+ || w_index != rndis->ctrl_id)
+ goto invalid;
+ /* read the request; process it later */
+ value = w_length;
+ req->complete = rndis_command_complete;
+ req->context = rndis;
+ /* later, rndis_response_available() sends a notification */
+ break;
+
+ case ((USB_DIR_IN | USB_TYPE_CLASS | USB_RECIP_INTERFACE) << 8)
+ | USB_CDC_GET_ENCAPSULATED_RESPONSE:
+ if (w_value || w_index != rndis->ctrl_id)
+ goto invalid;
+ else {
+ u8 *buf;
+ u32 n;
+
+ /* return the result */
+ buf = rndis_get_next_response(rndis->config, &n);
+ if (buf) {
+ memcpy(req->buf, buf, n);
+ req->complete = rndis_response_complete;
+ rndis_free_response(rndis->config, buf);
+ value = n;
+ }
+ /* else stalls ... spec says to avoid that */
+ }
+ break;
+
+ default:
+invalid:
+ VDBG(cdev, "invalid control req%02x.%02x v%04x i%04x l%d\n",
+ ctrl->bRequestType, ctrl->bRequest,
+ w_value, w_index, w_length);
+ }
+
+ /* respond with data transfer or status phase? */
+ if (value >= 0) {
+ DBG(cdev, "rndis req%02x.%02x v%04x i%04x l%d\n",
+ ctrl->bRequestType, ctrl->bRequest,
+ w_value, w_index, w_length);
+ req->zero = 0;
+ req->length = value;
+ value = usb_ep_queue(cdev->gadget->ep0, req, GFP_ATOMIC);
+ if (value < 0)
+ ERROR(cdev, "rndis response on err %d\n", value);
+ }
+
+ /* device either stalls (value < 0) or reports success */
+ return value;
+}
+
+
+static int rndis_set_alt(struct usb_function *f, unsigned intf, unsigned alt)
+{
+ struct f_rndis *rndis = func_to_rndis(f);
+ struct usb_composite_dev *cdev = f->config->cdev;
+
+ /* we know alt == 0 */
+
+ if (intf == rndis->ctrl_id) {
+ if (rndis->notify->driver_data) {
+ VDBG(cdev, "reset rndis control %d\n", intf);
+ usb_ep_disable(rndis->notify);
+ } else {
+ VDBG(cdev, "init rndis ctrl %d\n", intf);
+ rndis->notify_desc = ep_choose(cdev->gadget,
+ rndis->hs.notify,
+ rndis->fs.notify);
+ }
+ usb_ep_enable(rndis->notify, rndis->notify_desc);
+ rndis->notify->driver_data = rndis;
+
+ } else if (intf == rndis->data_id) {
+ struct net_device *net;
+
+ if (rndis->port.in_ep->driver_data) {
+ DBG(cdev, "reset rndis\n");
+ gether_disconnect(&rndis->port);
+ } else {
+ DBG(cdev, "init rndis\n");
+ rndis->port.in = ep_choose(cdev->gadget,
+ rndis->hs.in, rndis->fs.in);
+ rndis->port.out = ep_choose(cdev->gadget,
+ rndis->hs.out, rndis->fs.out);
+ }
+
+ /* Avoid ZLPs; they can be troublesome. */
+ rndis->port.is_zlp_ok = false;
+
+ /* RNDIS should be in the "RNDIS uninitialized" state,
+ * either never activated or after rndis_uninit().
+ *
+ * We don't want data to flow here until a nonzero packet
+ * filter is set, at which point it enters "RNDIS data
+ * initialized" state ... but we do want the endpoints
+ * to be activated. It's a strange little state.
+ *
+ * REVISIT the RNDIS gadget code has done this wrong for a
+ * very long time. We need another call to the link layer
+ * code -- gether_updown(...bool) maybe -- to do it right.
+ */
+ rndis->port.cdc_filter = 0;
+
+ DBG(cdev, "RNDIS RX/TX early activation ... \n");
+ net = gether_connect(&rndis->port);
+ if (IS_ERR(net))
+ return PTR_ERR(net);
+
+ rndis_set_param_dev(rndis->config, net,
+ &rndis->port.cdc_filter);
+ } else
+ goto fail;
+
+ return 0;
+fail:
+ return -EINVAL;
+}
+
+static void rndis_disable(struct usb_function *f)
+{
+ struct f_rndis *rndis = func_to_rndis(f);
+ struct usb_composite_dev *cdev = f->config->cdev;
+
+ if (!rndis->notify->driver_data)
+ return;
+
+ DBG(cdev, "rndis deactivated\n");
+
+ rndis_uninit(rndis->config);
+ gether_disconnect(&rndis->port);
+
+ usb_ep_disable(rndis->notify);
+ rndis->notify->driver_data = NULL;
+}
+
+/*-------------------------------------------------------------------------*/
+
+/*
+ * This isn't quite the same mechanism as CDC Ethernet, since the
+ * notification scheme passes less data, but the same set of link
+ * states must be tested. A key difference is that altsettings are
+ * not used to tell whether the link should send packets or not.
+ */
+
+static void rndis_open(struct gether *geth)
+{
+ struct f_rndis *rndis = func_to_rndis(&geth->func);
+ struct usb_composite_dev *cdev = geth->func.config->cdev;
+
+ DBG(cdev, "%s\n", __func__);
+
+ rndis_set_param_medium(rndis->config, NDIS_MEDIUM_802_3,
+ bitrate(cdev->gadget) / 100);
+ rndis_signal_connect(rndis->config);
+}
+
+static void rndis_close(struct gether *geth)
+{
+ struct f_rndis *rndis = func_to_rndis(&geth->func);
+
+ DBG(geth->func.config->cdev, "%s\n", __func__);
+
+ rndis_set_param_medium(rndis->config, NDIS_MEDIUM_802_3, 0);
+ rndis_signal_disconnect(rndis->config);
+}
+
+/*-------------------------------------------------------------------------*/
+
+/* ethernet function driver setup/binding */
+
+static int __init
+rndis_bind(struct usb_configuration *c, struct usb_function *f)
+{
+ struct usb_composite_dev *cdev = c->cdev;
+ struct f_rndis *rndis = func_to_rndis(f);
+ int status;
+ struct usb_ep *ep;
+
+ /* allocate instance-specific interface IDs */
+ status = usb_interface_id(c, f);
+ if (status < 0)
+ goto fail;
+ rndis->ctrl_id = status;
+
+ rndis_control_intf.bInterfaceNumber = status;
+ rndis_union_desc.bMasterInterface0 = status;
+
+ status = usb_interface_id(c, f);
+ if (status < 0)
+ goto fail;
+ rndis->data_id = status;
+
+ rndis_data_intf.bInterfaceNumber = status;
+ rndis_union_desc.bSlaveInterface0 = status;
+
+ status = -ENODEV;
+
+ /* allocate instance-specific endpoints */
+ ep = usb_ep_autoconfig(cdev->gadget, &fs_in_desc);
+ if (!ep)
+ goto fail;
+ rndis->port.in_ep = ep;
+ ep->driver_data = cdev; /* claim */
+
+ ep = usb_ep_autoconfig(cdev->gadget, &fs_out_desc);
+ if (!ep)
+ goto fail;
+ rndis->port.out_ep = ep;
+ ep->driver_data = cdev; /* claim */
+
+ /* NOTE: a status/notification endpoint is, strictly speaking,
+ * optional. We don't treat it that way though! It's simpler,
+ * and some newer profiles don't treat it as optional.
+ */
+ ep = usb_ep_autoconfig(cdev->gadget, &fs_notify_desc);
+ if (!ep)
+ goto fail;
+ rndis->notify = ep;
+ ep->driver_data = cdev; /* claim */
+
+ status = -ENOMEM;
+
+ /* allocate notification request and buffer */
+ rndis->notify_req = usb_ep_alloc_request(ep, GFP_KERNEL);
+ if (!rndis->notify_req)
+ goto fail;
+ rndis->notify_req->buf = kmalloc(STATUS_BYTECOUNT, GFP_KERNEL);
+ if (!rndis->notify_req->buf)
+ goto fail;
+ rndis->notify_req->length = STATUS_BYTECOUNT;
+ rndis->notify_req->context = rndis;
+ rndis->notify_req->complete = rndis_response_complete;
+
+ /* copy descriptors, and track endpoint copies */
+ f->descriptors = usb_copy_descriptors(eth_fs_function);
+ if (!f->descriptors)
+ goto fail;
+
+ rndis->fs.in = usb_find_endpoint(eth_fs_function,
+ f->descriptors, &fs_in_desc);
+ rndis->fs.out = usb_find_endpoint(eth_fs_function,
+ f->descriptors, &fs_out_desc);
+ rndis->fs.notify = usb_find_endpoint(eth_fs_function,
+ f->descriptors, &fs_notify_desc);
+
+ /* support all relevant hardware speeds... we expect that when
+ * hardware is dual speed, all bulk-capable endpoints work at
+ * both speeds
+ */
+ if (gadget_is_dualspeed(c->cdev->gadget)) {
+ hs_in_desc.bEndpointAddress =
+ fs_in_desc.bEndpointAddress;
+ hs_out_desc.bEndpointAddress =
+ fs_out_desc.bEndpointAddress;
+
+ /* copy descriptors, and track endpoint copies */
+ f->hs_descriptors = usb_copy_descriptors(eth_hs_function);
+
+ if (!f->hs_descriptors)
+ goto fail;
+
+ rndis->hs.in = usb_find_endpoint(eth_hs_function,
+ f->hs_descriptors, &hs_in_desc);
+ rndis->hs.out = usb_find_endpoint(eth_hs_function,
+ f->hs_descriptors, &hs_out_desc);
+ }
+
+ rndis->port.open = rndis_open;
+ rndis->port.close = rndis_close;
+
+ status = rndis_register(rndis_response_available, rndis);
+ if (status < 0)
+ goto fail;
+ rndis->config = status;
+
+ rndis_set_param_medium(rndis->config, NDIS_MEDIUM_802_3, 0);
+ rndis_set_host_mac(rndis->config, rndis->ethaddr);
+
+#if 0
+// FIXME
+ if (rndis_set_param_vendor(rndis->config, vendorID,
+ manufacturer))
+ goto fail0;
+#endif
+
+ /* NOTE: all that is done without knowing or caring about
+ * the network link ... which is unavailable to this code
+ * until we're activated via set_alt().
+ */
+
+ DBG(cdev, "RNDIS: %s speed IN/%s OUT/%s NOTIFY/%s\n",
+ gadget_is_dualspeed(c->cdev->gadget) ? "dual" : "full",
+ rndis->port.in_ep->name, rndis->port.out_ep->name,
+ rndis->notify->name);
+ return 0;
+
+fail:
+ if (gadget_is_dualspeed(c->cdev->gadget) && f->hs_descriptors)
+ usb_free_descriptors(f->hs_descriptors);
+ if (f->descriptors)
+ usb_free_descriptors(f->descriptors);
+
+ if (rndis->notify_req) {
+ kfree(rndis->notify_req->buf);
+ usb_ep_free_request(rndis->notify, rndis->notify_req);
+ }
+
+ /* we might as well release our claims on endpoints */
+ if (rndis->notify)
+ rndis->notify->driver_data = NULL;
+ if (rndis->port.out)
+ rndis->port.out_ep->driver_data = NULL;
+ if (rndis->port.in)
+ rndis->port.in_ep->driver_data = NULL;
+
+ ERROR(cdev, "%s: can't bind, err %d\n", f->name, status);
+
+ return status;
+}
+
+static void
+rndis_unbind(struct usb_configuration *c, struct usb_function *f)
+{
+ struct f_rndis *rndis = func_to_rndis(f);
+
+ rndis_deregister(rndis->config);
+ rndis_exit();
+
+ if (gadget_is_dualspeed(c->cdev->gadget))
+ usb_free_descriptors(f->hs_descriptors);
+ usb_free_descriptors(f->descriptors);
+
+ kfree(rndis->notify_req->buf);
+ usb_ep_free_request(rndis->notify, rndis->notify_req);
+
+ kfree(rndis);
+}
+
+/* Some controllers can't support RNDIS ... */
+static inline bool can_support_rndis(struct usb_configuration *c)
+{
+ /* only two endpoints on sa1100 */
+ if (gadget_is_sa1100(c->cdev->gadget))
+ return false;
+
+ /* everything else is *presumably* fine */
+ return true;
+}
+
+/**
+ * rndis_bind_config - add RNDIS network link to a configuration
+ * @c: the configuration to support the network link
+ * @ethaddr: a buffer in which the ethernet address of the host side
+ * side of the link was recorded
+ * Context: single threaded during gadget setup
+ *
+ * Returns zero on success, else negative errno.
+ *
+ * Caller must have called @gether_setup(). Caller is also responsible
+ * for calling @gether_cleanup() before module unload.
+ */
+int __init rndis_bind_config(struct usb_configuration *c, u8 ethaddr[ETH_ALEN])
+{
+ struct f_rndis *rndis;
+ int status;
+
+ if (!can_support_rndis(c) || !ethaddr)
+ return -EINVAL;
+
+ /* maybe allocate device-global string IDs */
+ if (rndis_string_defs[0].id == 0) {
+
+ /* ... and setup RNDIS itself */
+ status = rndis_init();
+ if (status < 0)
+ return status;
+
+ /* control interface label */
+ status = usb_string_id(c->cdev);
+ if (status < 0)
+ return status;
+ rndis_string_defs[0].id = status;
+ rndis_control_intf.iInterface = status;
+
+ /* data interface label */
+ status = usb_string_id(c->cdev);
+ if (status < 0)
+ return status;
+ rndis_string_defs[1].id = status;
+ rndis_data_intf.iInterface = status;
+ }
+
+ /* allocate and initialize one new instance */
+ status = -ENOMEM;
+ rndis = kzalloc(sizeof *rndis, GFP_KERNEL);
+ if (!rndis)
+ goto fail;
+
+ memcpy(rndis->ethaddr, ethaddr, ETH_ALEN);
+
+ /* RNDIS activates when the host changes this filter */
+ rndis->port.cdc_filter = 0;
+
+ /* RNDIS has special (and complex) framing */
+ rndis->port.header_len = sizeof(struct rndis_packet_msg_type);
+ rndis->port.wrap = rndis_add_header;
+ rndis->port.unwrap = rndis_rm_hdr;
+
+ rndis->port.func.name = "rndis";
+ rndis->port.func.strings = rndis_strings;
+ /* descriptors are per-instance copies */
+ rndis->port.func.bind = rndis_bind;
+ rndis->port.func.unbind = rndis_unbind;
+ rndis->port.func.set_alt = rndis_set_alt;
+ rndis->port.func.setup = rndis_setup;
+ rndis->port.func.disable = rndis_disable;
+
+ status = usb_add_function(c, &rndis->port.func);
+ if (status) {
+ kfree(rndis);
+fail:
+ rndis_exit();
+ }
+ return status;
+}
diff --git a/drivers/usb/gadget/f_serial.c b/drivers/usb/gadget/f_serial.c
new file mode 100644
index 00000000000..1b6bde9aaed
--- /dev/null
+++ b/drivers/usb/gadget/f_serial.c
@@ -0,0 +1,296 @@
+/*
+ * f_serial.c - generic USB serial function driver
+ *
+ * Copyright (C) 2003 Al Borchers (alborchers@steinerpoint.com)
+ * Copyright (C) 2008 by David Brownell
+ * Copyright (C) 2008 by Nokia Corporation
+ *
+ * This software is distributed under the terms of the GNU General
+ * Public License ("GPL") as published by the Free Software Foundation,
+ * either version 2 of that License or (at your option) any later version.
+ */
+
+#include <linux/kernel.h>
+#include <linux/device.h>
+
+#include "u_serial.h"
+#include "gadget_chips.h"
+
+
+/*
+ * This function packages a simple "generic serial" port with no real
+ * control mechanisms, just raw data transfer over two bulk endpoints.
+ *
+ * Because it's not standardized, this isn't as interoperable as the
+ * CDC ACM driver. However, for many purposes it's just as functional
+ * if you can arrange appropriate host side drivers.
+ */
+
+struct gser_descs {
+ struct usb_endpoint_descriptor *in;
+ struct usb_endpoint_descriptor *out;
+};
+
+struct f_gser {
+ struct gserial port;
+ u8 data_id;
+ u8 port_num;
+
+ struct usb_descriptor_header **fs_function;
+ struct gser_descs fs;
+ struct usb_descriptor_header **hs_function;
+ struct gser_descs hs;
+};
+
+static inline struct f_gser *func_to_gser(struct usb_function *f)
+{
+ return container_of(f, struct f_gser, port.func);
+}
+
+/*-------------------------------------------------------------------------*/
+
+/* interface descriptor: */
+
+static struct usb_interface_descriptor gser_interface_desc __initdata = {
+ .bLength = USB_DT_INTERFACE_SIZE,
+ .bDescriptorType = USB_DT_INTERFACE,
+ /* .bInterfaceNumber = DYNAMIC */
+ .bNumEndpoints = 2,
+ .bInterfaceClass = USB_CLASS_VENDOR_SPEC,
+ .bInterfaceSubClass = 0,
+ .bInterfaceProtocol = 0,
+ /* .iInterface = DYNAMIC */
+};
+
+/* full speed support: */
+
+static struct usb_endpoint_descriptor gser_fs_in_desc __initdata = {
+ .bLength = USB_DT_ENDPOINT_SIZE,
+ .bDescriptorType = USB_DT_ENDPOINT,
+ .bEndpointAddress = USB_DIR_IN,
+ .bmAttributes = USB_ENDPOINT_XFER_BULK,
+};
+
+static struct usb_endpoint_descriptor gser_fs_out_desc __initdata = {
+ .bLength = USB_DT_ENDPOINT_SIZE,
+ .bDescriptorType = USB_DT_ENDPOINT,
+ .bEndpointAddress = USB_DIR_OUT,
+ .bmAttributes = USB_ENDPOINT_XFER_BULK,
+};
+
+static struct usb_descriptor_header *gser_fs_function[] __initdata = {
+ (struct usb_descriptor_header *) &gser_interface_desc,
+ (struct usb_descriptor_header *) &gser_fs_in_desc,
+ (struct usb_descriptor_header *) &gser_fs_out_desc,
+ NULL,
+};
+
+/* high speed support: */
+
+static struct usb_endpoint_descriptor gser_hs_in_desc __initdata = {
+ .bLength = USB_DT_ENDPOINT_SIZE,
+ .bDescriptorType = USB_DT_ENDPOINT,
+ .bmAttributes = USB_ENDPOINT_XFER_BULK,
+ .wMaxPacketSize = __constant_cpu_to_le16(512),
+};
+
+static struct usb_endpoint_descriptor gser_hs_out_desc __initdata = {
+ .bLength = USB_DT_ENDPOINT_SIZE,
+ .bDescriptorType = USB_DT_ENDPOINT,
+ .bmAttributes = USB_ENDPOINT_XFER_BULK,
+ .wMaxPacketSize = __constant_cpu_to_le16(512),
+};
+
+static struct usb_descriptor_header *gser_hs_function[] __initdata = {
+ (struct usb_descriptor_header *) &gser_interface_desc,
+ (struct usb_descriptor_header *) &gser_hs_in_desc,
+ (struct usb_descriptor_header *) &gser_hs_out_desc,
+ NULL,
+};
+
+/* string descriptors: */
+
+static struct usb_string gser_string_defs[] = {
+ [0].s = "Generic Serial",
+ { } /* end of list */
+};
+
+static struct usb_gadget_strings gser_string_table = {
+ .language = 0x0409, /* en-us */
+ .strings = gser_string_defs,
+};
+
+static struct usb_gadget_strings *gser_strings[] = {
+ &gser_string_table,
+ NULL,
+};
+
+/*-------------------------------------------------------------------------*/
+
+static int gser_set_alt(struct usb_function *f, unsigned intf, unsigned alt)
+{
+ struct f_gser *gser = func_to_gser(f);
+ struct usb_composite_dev *cdev = f->config->cdev;
+
+ /* we know alt == 0, so this is an activation or a reset */
+
+ if (gser->port.in->driver_data) {
+ DBG(cdev, "reset generic ttyGS%d\n", gser->port_num);
+ gserial_disconnect(&gser->port);
+ } else {
+ DBG(cdev, "activate generic ttyGS%d\n", gser->port_num);
+ gser->port.in_desc = ep_choose(cdev->gadget,
+ gser->hs.in, gser->fs.in);
+ gser->port.out_desc = ep_choose(cdev->gadget,
+ gser->hs.out, gser->fs.out);
+ }
+ gserial_connect(&gser->port, gser->port_num);
+ return 0;
+}
+
+static void gser_disable(struct usb_function *f)
+{
+ struct f_gser *gser = func_to_gser(f);
+ struct usb_composite_dev *cdev = f->config->cdev;
+
+ DBG(cdev, "generic ttyGS%d deactivated\n", gser->port_num);
+ gserial_disconnect(&gser->port);
+}
+
+/*-------------------------------------------------------------------------*/
+
+/* serial function driver setup/binding */
+
+static int __init
+gser_bind(struct usb_configuration *c, struct usb_function *f)
+{
+ struct usb_composite_dev *cdev = c->cdev;
+ struct f_gser *gser = func_to_gser(f);
+ int status;
+ struct usb_ep *ep;
+
+ /* allocate instance-specific interface IDs */
+ status = usb_interface_id(c, f);
+ if (status < 0)
+ goto fail;
+ gser->data_id = status;
+ gser_interface_desc.bInterfaceNumber = status;
+
+ status = -ENODEV;
+
+ /* allocate instance-specific endpoints */
+ ep = usb_ep_autoconfig(cdev->gadget, &gser_fs_in_desc);
+ if (!ep)
+ goto fail;
+ gser->port.in = ep;
+ ep->driver_data = cdev; /* claim */
+
+ ep = usb_ep_autoconfig(cdev->gadget, &gser_fs_out_desc);
+ if (!ep)
+ goto fail;
+ gser->port.out = ep;
+ ep->driver_data = cdev; /* claim */
+
+ /* copy descriptors, and track endpoint copies */
+ f->descriptors = usb_copy_descriptors(gser_fs_function);
+
+ gser->fs.in = usb_find_endpoint(gser_fs_function,
+ f->descriptors, &gser_fs_in_desc);
+ gser->fs.out = usb_find_endpoint(gser_fs_function,
+ f->descriptors, &gser_fs_out_desc);
+
+
+ /* support all relevant hardware speeds... we expect that when
+ * hardware is dual speed, all bulk-capable endpoints work at
+ * both speeds
+ */
+ if (gadget_is_dualspeed(c->cdev->gadget)) {
+ gser_hs_in_desc.bEndpointAddress =
+ gser_fs_in_desc.bEndpointAddress;
+ gser_hs_out_desc.bEndpointAddress =
+ gser_fs_out_desc.bEndpointAddress;
+
+ /* copy descriptors, and track endpoint copies */
+ f->hs_descriptors = usb_copy_descriptors(gser_hs_function);
+
+ gser->hs.in = usb_find_endpoint(gser_hs_function,
+ f->hs_descriptors, &gser_hs_in_desc);
+ gser->hs.out = usb_find_endpoint(gser_hs_function,
+ f->hs_descriptors, &gser_hs_out_desc);
+ }
+
+ DBG(cdev, "generic ttyGS%d: %s speed IN/%s OUT/%s\n",
+ gser->port_num,
+ gadget_is_dualspeed(c->cdev->gadget) ? "dual" : "full",
+ gser->port.in->name, gser->port.out->name);
+ return 0;
+
+fail:
+ /* we might as well release our claims on endpoints */
+ if (gser->port.out)
+ gser->port.out->driver_data = NULL;
+ if (gser->port.in)
+ gser->port.in->driver_data = NULL;
+
+ ERROR(cdev, "%s: can't bind, err %d\n", f->name, status);
+
+ return status;
+}
+
+static void
+gser_unbind(struct usb_configuration *c, struct usb_function *f)
+{
+ if (gadget_is_dualspeed(c->cdev->gadget))
+ usb_free_descriptors(f->hs_descriptors);
+ usb_free_descriptors(f->descriptors);
+ kfree(func_to_gser(f));
+}
+
+/**
+ * gser_bind_config - add a generic serial function to a configuration
+ * @c: the configuration to support the serial instance
+ * @port_num: /dev/ttyGS* port this interface will use
+ * Context: single threaded during gadget setup
+ *
+ * Returns zero on success, else negative errno.
+ *
+ * Caller must have called @gserial_setup() with enough ports to
+ * handle all the ones it binds. Caller is also responsible
+ * for calling @gserial_cleanup() before module unload.
+ */
+int __init gser_bind_config(struct usb_configuration *c, u8 port_num)
+{
+ struct f_gser *gser;
+ int status;
+
+ /* REVISIT might want instance-specific strings to help
+ * distinguish instances ...
+ */
+
+ /* maybe allocate device-global string ID */
+ if (gser_string_defs[0].id == 0) {
+ status = usb_string_id(c->cdev);
+ if (status < 0)
+ return status;
+ gser_string_defs[0].id = status;
+ }
+
+ /* allocate and initialize one new instance */
+ gser = kzalloc(sizeof *gser, GFP_KERNEL);
+ if (!gser)
+ return -ENOMEM;
+
+ gser->port_num = port_num;
+
+ gser->port.func.name = "gser";
+ gser->port.func.strings = gser_strings;
+ gser->port.func.bind = gser_bind;
+ gser->port.func.unbind = gser_unbind;
+ gser->port.func.set_alt = gser_set_alt;
+ gser->port.func.disable = gser_disable;
+
+ status = usb_add_function(c, &gser->port.func);
+ if (status)
+ kfree(gser);
+ return status;
+}
diff --git a/drivers/usb/gadget/f_sourcesink.c b/drivers/usb/gadget/f_sourcesink.c
new file mode 100644
index 00000000000..f18c3a14d72
--- /dev/null
+++ b/drivers/usb/gadget/f_sourcesink.c
@@ -0,0 +1,587 @@
+/*
+ * f_sourcesink.c - USB peripheral source/sink configuration driver
+ *
+ * Copyright (C) 2003-2008 David Brownell
+ * Copyright (C) 2008 by Nokia Corporation
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
+ */
+
+/* #define VERBOSE_DEBUG */
+
+#include <linux/kernel.h>
+#include <linux/utsname.h>
+#include <linux/device.h>
+
+#include "g_zero.h"
+#include "gadget_chips.h"
+
+
+/*
+ * SOURCE/SINK FUNCTION ... a primary testing vehicle for USB peripheral
+ * controller drivers.
+ *
+ * This just sinks bulk packets OUT to the peripheral and sources them IN
+ * to the host, optionally with specific data patterns for integrity tests.
+ * As such it supports basic functionality and load tests.
+ *
+ * In terms of control messaging, this supports all the standard requests
+ * plus two that support control-OUT tests. If the optional "autoresume"
+ * mode is enabled, it provides good functional coverage for the "USBCV"
+ * test harness from USB-IF.
+ *
+ * Note that because this doesn't queue more than one request at a time,
+ * some other function must be used to test queueing logic. The network
+ * link (g_ether) is the best overall option for that, since its TX and RX
+ * queues are relatively independent, will receive a range of packet sizes,
+ * and can often be made to run out completely. Those issues are important
+ * when stress testing peripheral controller drivers.
+ *
+ *
+ * This is currently packaged as a configuration driver, which can't be
+ * combined with other functions to make composite devices. However, it
+ * can be combined with other independent configurations.
+ */
+struct f_sourcesink {
+ struct usb_function function;
+
+ struct usb_ep *in_ep;
+ struct usb_ep *out_ep;
+ struct timer_list resume;
+};
+
+static inline struct f_sourcesink *func_to_ss(struct usb_function *f)
+{
+ return container_of(f, struct f_sourcesink, function);
+}
+
+static unsigned autoresume;
+module_param(autoresume, uint, 0);
+MODULE_PARM_DESC(autoresume, "zero, or seconds before remote wakeup");
+
+static unsigned pattern;
+module_param(pattern, uint, 0);
+MODULE_PARM_DESC(pattern, "0 = all zeroes, 1 = mod63 ");
+
+/*-------------------------------------------------------------------------*/
+
+static struct usb_interface_descriptor source_sink_intf = {
+ .bLength = sizeof source_sink_intf,
+ .bDescriptorType = USB_DT_INTERFACE,
+
+ .bNumEndpoints = 2,
+ .bInterfaceClass = USB_CLASS_VENDOR_SPEC,
+ /* .iInterface = DYNAMIC */
+};
+
+/* full speed support: */
+
+static struct usb_endpoint_descriptor fs_source_desc = {
+ .bLength = USB_DT_ENDPOINT_SIZE,
+ .bDescriptorType = USB_DT_ENDPOINT,
+
+ .bEndpointAddress = USB_DIR_IN,
+ .bmAttributes = USB_ENDPOINT_XFER_BULK,
+};
+
+static struct usb_endpoint_descriptor fs_sink_desc = {
+ .bLength = USB_DT_ENDPOINT_SIZE,
+ .bDescriptorType = USB_DT_ENDPOINT,
+
+ .bEndpointAddress = USB_DIR_OUT,
+ .bmAttributes = USB_ENDPOINT_XFER_BULK,
+};
+
+static struct usb_descriptor_header *fs_source_sink_descs[] = {
+ (struct usb_descriptor_header *) &source_sink_intf,
+ (struct usb_descriptor_header *) &fs_sink_desc,
+ (struct usb_descriptor_header *) &fs_source_desc,
+ NULL,
+};
+
+/* high speed support: */
+
+static struct usb_endpoint_descriptor hs_source_desc = {
+ .bLength = USB_DT_ENDPOINT_SIZE,
+ .bDescriptorType = USB_DT_ENDPOINT,
+
+ .bmAttributes = USB_ENDPOINT_XFER_BULK,
+ .wMaxPacketSize = __constant_cpu_to_le16(512),
+};
+
+static struct usb_endpoint_descriptor hs_sink_desc = {
+ .bLength = USB_DT_ENDPOINT_SIZE,
+ .bDescriptorType = USB_DT_ENDPOINT,
+
+ .bmAttributes = USB_ENDPOINT_XFER_BULK,
+ .wMaxPacketSize = __constant_cpu_to_le16(512),
+};
+
+static struct usb_descriptor_header *hs_source_sink_descs[] = {
+ (struct usb_descriptor_header *) &source_sink_intf,
+ (struct usb_descriptor_header *) &hs_source_desc,
+ (struct usb_descriptor_header *) &hs_sink_desc,
+ NULL,
+};
+
+/* function-specific strings: */
+
+static struct usb_string strings_sourcesink[] = {
+ [0].s = "source and sink data",
+ { } /* end of list */
+};
+
+static struct usb_gadget_strings stringtab_sourcesink = {
+ .language = 0x0409, /* en-us */
+ .strings = strings_sourcesink,
+};
+
+static struct usb_gadget_strings *sourcesink_strings[] = {
+ &stringtab_sourcesink,
+ NULL,
+};
+
+/*-------------------------------------------------------------------------*/
+
+static void sourcesink_autoresume(unsigned long _c)
+{
+ struct usb_composite_dev *cdev = (void *)_c;
+ struct usb_gadget *g = cdev->gadget;
+
+ /* Normally the host would be woken up for something
+ * more significant than just a timer firing; likely
+ * because of some direct user request.
+ */
+ if (g->speed != USB_SPEED_UNKNOWN) {
+ int status = usb_gadget_wakeup(g);
+ DBG(cdev, "%s --> %d\n", __func__, status);
+ }
+}
+
+static int __init
+sourcesink_bind(struct usb_configuration *c, struct usb_function *f)
+{
+ struct usb_composite_dev *cdev = c->cdev;
+ struct f_sourcesink *ss = func_to_ss(f);
+ int id;
+
+ /* allocate interface ID(s) */
+ id = usb_interface_id(c, f);
+ if (id < 0)
+ return id;
+ source_sink_intf.bInterfaceNumber = id;
+
+ /* allocate endpoints */
+ ss->in_ep = usb_ep_autoconfig(cdev->gadget, &fs_source_desc);
+ if (!ss->in_ep) {
+autoconf_fail:
+ ERROR(cdev, "%s: can't autoconfigure on %s\n",
+ f->name, cdev->gadget->name);
+ return -ENODEV;
+ }
+ ss->in_ep->driver_data = cdev; /* claim */
+
+ ss->out_ep = usb_ep_autoconfig(cdev->gadget, &fs_sink_desc);
+ if (!ss->out_ep)
+ goto autoconf_fail;
+ ss->out_ep->driver_data = cdev; /* claim */
+
+ setup_timer(&ss->resume, sourcesink_autoresume,
+ (unsigned long) c->cdev);
+
+ /* support high speed hardware */
+ if (gadget_is_dualspeed(c->cdev->gadget)) {
+ hs_source_desc.bEndpointAddress =
+ fs_source_desc.bEndpointAddress;
+ hs_sink_desc.bEndpointAddress =
+ fs_sink_desc.bEndpointAddress;
+ f->hs_descriptors = hs_source_sink_descs;
+ }
+
+ DBG(cdev, "%s speed %s: IN/%s, OUT/%s\n",
+ gadget_is_dualspeed(c->cdev->gadget) ? "dual" : "full",
+ f->name, ss->in_ep->name, ss->out_ep->name);
+ return 0;
+}
+
+static void
+sourcesink_unbind(struct usb_configuration *c, struct usb_function *f)
+{
+ kfree(func_to_ss(f));
+}
+
+/* optionally require specific source/sink data patterns */
+static int check_read_data(struct f_sourcesink *ss, struct usb_request *req)
+{
+ unsigned i;
+ u8 *buf = req->buf;
+ struct usb_composite_dev *cdev = ss->function.config->cdev;
+
+ for (i = 0; i < req->actual; i++, buf++) {
+ switch (pattern) {
+
+ /* all-zeroes has no synchronization issues */
+ case 0:
+ if (*buf == 0)
+ continue;
+ break;
+
+ /* "mod63" stays in sync with short-terminated transfers,
+ * OR otherwise when host and gadget agree on how large
+ * each usb transfer request should be. Resync is done
+ * with set_interface or set_config. (We *WANT* it to
+ * get quickly out of sync if controllers or their drivers
+ * stutter for any reason, including buffer duplcation...)
+ */
+ case 1:
+ if (*buf == (u8)(i % 63))
+ continue;
+ break;
+ }
+ ERROR(cdev, "bad OUT byte, buf[%d] = %d\n", i, *buf);
+ usb_ep_set_halt(ss->out_ep);
+ return -EINVAL;
+ }
+ return 0;
+}
+
+static void reinit_write_data(struct usb_ep *ep, struct usb_request *req)
+{
+ unsigned i;
+ u8 *buf = req->buf;
+
+ switch (pattern) {
+ case 0:
+ memset(req->buf, 0, req->length);
+ break;
+ case 1:
+ for (i = 0; i < req->length; i++)
+ *buf++ = (u8) (i % 63);
+ break;
+ }
+}
+
+static void source_sink_complete(struct usb_ep *ep, struct usb_request *req)
+{
+ struct f_sourcesink *ss = ep->driver_data;
+ struct usb_composite_dev *cdev = ss->function.config->cdev;
+ int status = req->status;
+
+ switch (status) {
+
+ case 0: /* normal completion? */
+ if (ep == ss->out_ep) {
+ check_read_data(ss, req);
+ memset(req->buf, 0x55, req->length);
+ } else
+ reinit_write_data(ep, req);
+ break;
+
+ /* this endpoint is normally active while we're configured */
+ case -ECONNABORTED: /* hardware forced ep reset */
+ case -ECONNRESET: /* request dequeued */
+ case -ESHUTDOWN: /* disconnect from host */
+ VDBG(cdev, "%s gone (%d), %d/%d\n", ep->name, status,
+ req->actual, req->length);
+ if (ep == ss->out_ep)
+ check_read_data(ss, req);
+ free_ep_req(ep, req);
+ return;
+
+ case -EOVERFLOW: /* buffer overrun on read means that
+ * we didn't provide a big enough
+ * buffer.
+ */
+ default:
+#if 1
+ DBG(cdev, "%s complete --> %d, %d/%d\n", ep->name,
+ status, req->actual, req->length);
+#endif
+ case -EREMOTEIO: /* short read */
+ break;
+ }
+
+ status = usb_ep_queue(ep, req, GFP_ATOMIC);
+ if (status) {
+ ERROR(cdev, "kill %s: resubmit %d bytes --> %d\n",
+ ep->name, req->length, status);
+ usb_ep_set_halt(ep);
+ /* FIXME recover later ... somehow */
+ }
+}
+
+static int source_sink_start_ep(struct f_sourcesink *ss, bool is_in)
+{
+ struct usb_ep *ep;
+ struct usb_request *req;
+ int status;
+
+ ep = is_in ? ss->in_ep : ss->out_ep;
+ req = alloc_ep_req(ep);
+ if (!req)
+ return -ENOMEM;
+
+ req->complete = source_sink_complete;
+ if (is_in)
+ reinit_write_data(ep, req);
+ else
+ memset(req->buf, 0x55, req->length);
+
+ status = usb_ep_queue(ep, req, GFP_ATOMIC);
+ if (status) {
+ struct usb_composite_dev *cdev;
+
+ cdev = ss->function.config->cdev;
+ ERROR(cdev, "start %s %s --> %d\n",
+ is_in ? "IN" : "OUT",
+ ep->name, status);
+ free_ep_req(ep, req);
+ }
+
+ return status;
+}
+
+static void disable_source_sink(struct f_sourcesink *ss)
+{
+ struct usb_composite_dev *cdev;
+
+ cdev = ss->function.config->cdev;
+ disable_endpoints(cdev, ss->in_ep, ss->out_ep);
+ del_timer(&ss->resume);
+ VDBG(cdev, "%s disabled\n", ss->function.name);
+}
+
+static int
+enable_source_sink(struct usb_composite_dev *cdev, struct f_sourcesink *ss)
+{
+ int result = 0;
+ const struct usb_endpoint_descriptor *src, *sink;
+ struct usb_ep *ep;
+
+ src = ep_choose(cdev->gadget, &hs_source_desc, &fs_source_desc);
+ sink = ep_choose(cdev->gadget, &hs_sink_desc, &fs_sink_desc);
+
+ /* one endpoint writes (sources) zeroes IN (to the host) */
+ ep = ss->in_ep;
+ result = usb_ep_enable(ep, src);
+ if (result < 0)
+ return result;
+ ep->driver_data = ss;
+
+ result = source_sink_start_ep(ss, true);
+ if (result < 0) {
+fail:
+ ep = ss->in_ep;
+ usb_ep_disable(ep);
+ ep->driver_data = NULL;
+ return result;
+ }
+
+ /* one endpoint reads (sinks) anything OUT (from the host) */
+ ep = ss->out_ep;
+ result = usb_ep_enable(ep, sink);
+ if (result < 0)
+ goto fail;
+ ep->driver_data = ss;
+
+ result = source_sink_start_ep(ss, false);
+ if (result < 0) {
+ usb_ep_disable(ep);
+ ep->driver_data = NULL;
+ goto fail;
+ }
+
+ DBG(cdev, "%s enabled\n", ss->function.name);
+ return result;
+}
+
+static int sourcesink_set_alt(struct usb_function *f,
+ unsigned intf, unsigned alt)
+{
+ struct f_sourcesink *ss = func_to_ss(f);
+ struct usb_composite_dev *cdev = f->config->cdev;
+
+ /* we know alt is zero */
+ if (ss->in_ep->driver_data)
+ disable_source_sink(ss);
+ return enable_source_sink(cdev, ss);
+}
+
+static void sourcesink_disable(struct usb_function *f)
+{
+ struct f_sourcesink *ss = func_to_ss(f);
+
+ disable_source_sink(ss);
+}
+
+static void sourcesink_suspend(struct usb_function *f)
+{
+ struct f_sourcesink *ss = func_to_ss(f);
+ struct usb_composite_dev *cdev = f->config->cdev;
+
+ if (cdev->gadget->speed == USB_SPEED_UNKNOWN)
+ return;
+
+ if (autoresume) {
+ mod_timer(&ss->resume, jiffies + (HZ * autoresume));
+ DBG(cdev, "suspend, wakeup in %d seconds\n", autoresume);
+ } else
+ DBG(cdev, "%s\n", __func__);
+}
+
+static void sourcesink_resume(struct usb_function *f)
+{
+ struct f_sourcesink *ss = func_to_ss(f);
+ struct usb_composite_dev *cdev = f->config->cdev;
+
+ DBG(cdev, "%s\n", __func__);
+ del_timer(&ss->resume);
+}
+
+/*-------------------------------------------------------------------------*/
+
+static int __init sourcesink_bind_config(struct usb_configuration *c)
+{
+ struct f_sourcesink *ss;
+ int status;
+
+ ss = kzalloc(sizeof *ss, GFP_KERNEL);
+ if (!ss)
+ return -ENOMEM;
+
+ ss->function.name = "source/sink";
+ ss->function.descriptors = fs_source_sink_descs;
+ ss->function.bind = sourcesink_bind;
+ ss->function.unbind = sourcesink_unbind;
+ ss->function.set_alt = sourcesink_set_alt;
+ ss->function.disable = sourcesink_disable;
+ ss->function.suspend = sourcesink_suspend;
+ ss->function.resume = sourcesink_resume;
+
+ status = usb_add_function(c, &ss->function);
+ if (status)
+ kfree(ss);
+ return status;
+}
+
+static int sourcesink_setup(struct usb_configuration *c,
+ const struct usb_ctrlrequest *ctrl)
+{
+ struct usb_request *req = c->cdev->req;
+ int value = -EOPNOTSUPP;
+ u16 w_index = le16_to_cpu(ctrl->wIndex);
+ u16 w_value = le16_to_cpu(ctrl->wValue);
+ u16 w_length = le16_to_cpu(ctrl->wLength);
+
+ /* composite driver infrastructure handles everything except
+ * the two control test requests.
+ */
+ switch (ctrl->bRequest) {
+
+ /*
+ * These are the same vendor-specific requests supported by
+ * Intel's USB 2.0 compliance test devices. We exceed that
+ * device spec by allowing multiple-packet requests.
+ *
+ * NOTE: the Control-OUT data stays in req->buf ... better
+ * would be copying it into a scratch buffer, so that other
+ * requests may safely intervene.
+ */
+ case 0x5b: /* control WRITE test -- fill the buffer */
+ if (ctrl->bRequestType != (USB_DIR_OUT|USB_TYPE_VENDOR))
+ goto unknown;
+ if (w_value || w_index)
+ break;
+ /* just read that many bytes into the buffer */
+ if (w_length > req->length)
+ break;
+ value = w_length;
+ break;
+ case 0x5c: /* control READ test -- return the buffer */
+ if (ctrl->bRequestType != (USB_DIR_IN|USB_TYPE_VENDOR))
+ goto unknown;
+ if (w_value || w_index)
+ break;
+ /* expect those bytes are still in the buffer; send back */
+ if (w_length > req->length)
+ break;
+ value = w_length;
+ break;
+
+ default:
+unknown:
+ VDBG(c->cdev,
+ "unknown control req%02x.%02x v%04x i%04x l%d\n",
+ ctrl->bRequestType, ctrl->bRequest,
+ w_value, w_index, w_length);
+ }
+
+ /* respond with data transfer or status phase? */
+ if (value >= 0) {
+ VDBG(c->cdev, "source/sink req%02x.%02x v%04x i%04x l%d\n",
+ ctrl->bRequestType, ctrl->bRequest,
+ w_value, w_index, w_length);
+ req->zero = 0;
+ req->length = value;
+ value = usb_ep_queue(c->cdev->gadget->ep0, req, GFP_ATOMIC);
+ if (value < 0)
+ ERROR(c->cdev, "source/sinkc response, err %d\n",
+ value);
+ }
+
+ /* device either stalls (value < 0) or reports success */
+ return value;
+}
+
+static struct usb_configuration sourcesink_driver = {
+ .label = "source/sink",
+ .strings = sourcesink_strings,
+ .bind = sourcesink_bind_config,
+ .setup = sourcesink_setup,
+ .bConfigurationValue = 3,
+ .bmAttributes = USB_CONFIG_ATT_SELFPOWER,
+ .bMaxPower = 1, /* 2 mA, minimal */
+ /* .iConfiguration = DYNAMIC */
+};
+
+/**
+ * sourcesink_add - add a source/sink testing configuration to a device
+ * @cdev: the device to support the configuration
+ */
+int __init sourcesink_add(struct usb_composite_dev *cdev)
+{
+ int id;
+
+ /* allocate string ID(s) */
+ id = usb_string_id(cdev);
+ if (id < 0)
+ return id;
+ strings_sourcesink[0].id = id;
+
+ source_sink_intf.iInterface = id;
+ sourcesink_driver.iConfiguration = id;
+
+ /* support autoresume for remote wakeup testing */
+ if (autoresume)
+ sourcesink_driver.bmAttributes |= USB_CONFIG_ATT_WAKEUP;
+
+ /* support OTG systems */
+ if (gadget_is_otg(cdev->gadget)) {
+ sourcesink_driver.descriptors = otg_desc;
+ sourcesink_driver.bmAttributes |= USB_CONFIG_ATT_WAKEUP;
+ }
+
+ return usb_add_config(cdev, &sourcesink_driver);
+}
diff --git a/drivers/usb/gadget/f_subset.c b/drivers/usb/gadget/f_subset.c
new file mode 100644
index 00000000000..afeab9a0523
--- /dev/null
+++ b/drivers/usb/gadget/f_subset.c
@@ -0,0 +1,423 @@
+/*
+ * f_subset.c -- "CDC Subset" Ethernet link function driver
+ *
+ * Copyright (C) 2003-2005,2008 David Brownell
+ * Copyright (C) 2008 Nokia Corporation
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
+ */
+
+#include <linux/kernel.h>
+#include <linux/device.h>
+#include <linux/etherdevice.h>
+
+#include "u_ether.h"
+
+
+/*
+ * This function packages a simple "CDC Subset" Ethernet port with no real
+ * control mechanisms; just raw data transfer over two bulk endpoints.
+ * The data transfer model is exactly that of CDC Ethernet, which is
+ * why we call it the "CDC Subset".
+ *
+ * Because it's not standardized, this has some interoperability issues.
+ * They mostly relate to driver binding, since the data transfer model is
+ * so simple (CDC Ethernet). The original versions of this protocol used
+ * specific product/vendor IDs: byteswapped IDs for Digital Equipment's
+ * SA-1100 "Itsy" board, which could run Linux 2.4 kernels and supported
+ * daughtercards with USB peripheral connectors. (It was used more often
+ * with other boards, using the Itsy identifiers.) Linux hosts recognized
+ * this with CONFIG_USB_ARMLINUX; these devices have only one configuration
+ * and one interface.
+ *
+ * At some point, MCCI defined a (nonconformant) CDC MDLM variant called
+ * "SAFE", which happens to have a mode which is identical to the "CDC
+ * Subset" in terms of data transfer and lack of control model. This was
+ * adopted by later Sharp Zaurus models, and by some other software which
+ * Linux hosts recognize with CONFIG_USB_NET_ZAURUS.
+ *
+ * Because Microsoft's RNDIS drivers are far from robust, we added a few
+ * descriptors to the CDC Subset code, making this code look like a SAFE
+ * implementation. This lets you use MCCI's host side MS-Windows drivers
+ * if you get fed up with RNDIS. It also makes it easier for composite
+ * drivers to work, since they can use class based binding instead of
+ * caring about specific product and vendor IDs.
+ */
+
+struct geth_descs {
+ struct usb_endpoint_descriptor *in;
+ struct usb_endpoint_descriptor *out;
+};
+
+struct f_gether {
+ struct gether port;
+
+ char ethaddr[14];
+
+ struct usb_descriptor_header **fs_function;
+ struct geth_descs fs;
+ struct usb_descriptor_header **hs_function;
+ struct geth_descs hs;
+};
+
+static inline struct f_gether *func_to_geth(struct usb_function *f)
+{
+ return container_of(f, struct f_gether, port.func);
+}
+
+/*-------------------------------------------------------------------------*/
+
+/*
+ * "Simple" CDC-subset option is a simple vendor-neutral model that most
+ * full speed controllers can handle: one interface, two bulk endpoints.
+ * To assist host side drivers, we fancy it up a bit, and add descriptors so
+ * some host side drivers will understand it as a "SAFE" variant.
+ *
+ * "SAFE" loosely follows CDC WMC MDLM, violating the spec in various ways.
+ * Data endpoints live in the control interface, there's no data interface.
+ * And it's not used to talk to a cell phone radio.
+ */
+
+/* interface descriptor: */
+
+static struct usb_interface_descriptor subset_data_intf __initdata = {
+ .bLength = sizeof subset_data_intf,
+ .bDescriptorType = USB_DT_INTERFACE,
+
+ /* .bInterfaceNumber = DYNAMIC */
+ .bAlternateSetting = 0,
+ .bNumEndpoints = 2,
+ .bInterfaceClass = USB_CLASS_COMM,
+ .bInterfaceSubClass = USB_CDC_SUBCLASS_MDLM,
+ .bInterfaceProtocol = 0,
+ /* .iInterface = DYNAMIC */
+};
+
+static struct usb_cdc_header_desc header_desc __initdata = {
+ .bLength = sizeof header_desc,
+ .bDescriptorType = USB_DT_CS_INTERFACE,
+ .bDescriptorSubType = USB_CDC_HEADER_TYPE,
+
+ .bcdCDC = __constant_cpu_to_le16(0x0110),
+};
+
+static struct usb_cdc_mdlm_desc mdlm_desc __initdata = {
+ .bLength = sizeof mdlm_desc,
+ .bDescriptorType = USB_DT_CS_INTERFACE,
+ .bDescriptorSubType = USB_CDC_MDLM_TYPE,
+
+ .bcdVersion = __constant_cpu_to_le16(0x0100),
+ .bGUID = {
+ 0x5d, 0x34, 0xcf, 0x66, 0x11, 0x18, 0x11, 0xd6,
+ 0xa2, 0x1a, 0x00, 0x01, 0x02, 0xca, 0x9a, 0x7f,
+ },
+};
+
+/* since "usb_cdc_mdlm_detail_desc" is a variable length structure, we
+ * can't really use its struct. All we do here is say that we're using
+ * the submode of "SAFE" which directly matches the CDC Subset.
+ */
+static u8 mdlm_detail_desc[] __initdata = {
+ 6,
+ USB_DT_CS_INTERFACE,
+ USB_CDC_MDLM_DETAIL_TYPE,
+
+ 0, /* "SAFE" */
+ 0, /* network control capabilities (none) */
+ 0, /* network data capabilities ("raw" encapsulation) */
+};
+
+static struct usb_cdc_ether_desc ether_desc __initdata = {
+ .bLength = sizeof ether_desc,
+ .bDescriptorType = USB_DT_CS_INTERFACE,
+ .bDescriptorSubType = USB_CDC_ETHERNET_TYPE,
+
+ /* this descriptor actually adds value, surprise! */
+ /* .iMACAddress = DYNAMIC */
+ .bmEthernetStatistics = __constant_cpu_to_le32(0), /* no statistics */
+ .wMaxSegmentSize = __constant_cpu_to_le16(ETH_FRAME_LEN),
+ .wNumberMCFilters = __constant_cpu_to_le16(0),
+ .bNumberPowerFilters = 0,
+};
+
+/* full speed support: */
+
+static struct usb_endpoint_descriptor fs_in_desc __initdata = {
+ .bLength = USB_DT_ENDPOINT_SIZE,
+ .bDescriptorType = USB_DT_ENDPOINT,
+
+ .bEndpointAddress = USB_DIR_IN,
+ .bmAttributes = USB_ENDPOINT_XFER_BULK,
+};
+
+static struct usb_endpoint_descriptor fs_out_desc __initdata = {
+ .bLength = USB_DT_ENDPOINT_SIZE,
+ .bDescriptorType = USB_DT_ENDPOINT,
+
+ .bEndpointAddress = USB_DIR_OUT,
+ .bmAttributes = USB_ENDPOINT_XFER_BULK,
+};
+
+static struct usb_descriptor_header *fs_eth_function[] __initdata = {
+ (struct usb_descriptor_header *) &subset_data_intf,
+ (struct usb_descriptor_header *) &header_desc,
+ (struct usb_descriptor_header *) &mdlm_desc,
+ (struct usb_descriptor_header *) &mdlm_detail_desc,
+ (struct usb_descriptor_header *) &ether_desc,
+ (struct usb_descriptor_header *) &fs_in_desc,
+ (struct usb_descriptor_header *) &fs_out_desc,
+ NULL,
+};
+
+/* high speed support: */
+
+static struct usb_endpoint_descriptor hs_in_desc __initdata = {
+ .bLength = USB_DT_ENDPOINT_SIZE,
+ .bDescriptorType = USB_DT_ENDPOINT,
+
+ .bmAttributes = USB_ENDPOINT_XFER_BULK,
+ .wMaxPacketSize = __constant_cpu_to_le16(512),
+};
+
+static struct usb_endpoint_descriptor hs_out_desc __initdata = {
+ .bLength = USB_DT_ENDPOINT_SIZE,
+ .bDescriptorType = USB_DT_ENDPOINT,
+
+ .bmAttributes = USB_ENDPOINT_XFER_BULK,
+ .wMaxPacketSize = __constant_cpu_to_le16(512),
+};
+
+static struct usb_descriptor_header *hs_eth_function[] __initdata = {
+ (struct usb_descriptor_header *) &subset_data_intf,
+ (struct usb_descriptor_header *) &header_desc,
+ (struct usb_descriptor_header *) &mdlm_desc,
+ (struct usb_descriptor_header *) &mdlm_detail_desc,
+ (struct usb_descriptor_header *) &ether_desc,
+ (struct usb_descriptor_header *) &hs_in_desc,
+ (struct usb_descriptor_header *) &hs_out_desc,
+ NULL,
+};
+
+/* string descriptors: */
+
+static struct usb_string geth_string_defs[] = {
+ [0].s = "CDC Ethernet Subset/SAFE",
+ [1].s = NULL /* DYNAMIC */,
+ { } /* end of list */
+};
+
+static struct usb_gadget_strings geth_string_table = {
+ .language = 0x0409, /* en-us */
+ .strings = geth_string_defs,
+};
+
+static struct usb_gadget_strings *geth_strings[] = {
+ &geth_string_table,
+ NULL,
+};
+
+/*-------------------------------------------------------------------------*/
+
+static int geth_set_alt(struct usb_function *f, unsigned intf, unsigned alt)
+{
+ struct f_gether *geth = func_to_geth(f);
+ struct usb_composite_dev *cdev = f->config->cdev;
+ struct net_device *net;
+
+ /* we know alt == 0, so this is an activation or a reset */
+
+ if (geth->port.in_ep->driver_data) {
+ DBG(cdev, "reset cdc subset\n");
+ gether_disconnect(&geth->port);
+ }
+
+ DBG(cdev, "init + activate cdc subset\n");
+ geth->port.in = ep_choose(cdev->gadget,
+ geth->hs.in, geth->fs.in);
+ geth->port.out = ep_choose(cdev->gadget,
+ geth->hs.out, geth->fs.out);
+
+ net = gether_connect(&geth->port);
+ return IS_ERR(net) ? PTR_ERR(net) : 0;
+}
+
+static void geth_disable(struct usb_function *f)
+{
+ struct f_gether *geth = func_to_geth(f);
+ struct usb_composite_dev *cdev = f->config->cdev;
+
+ DBG(cdev, "net deactivated\n");
+ gether_disconnect(&geth->port);
+}
+
+/*-------------------------------------------------------------------------*/
+
+/* serial function driver setup/binding */
+
+static int __init
+geth_bind(struct usb_configuration *c, struct usb_function *f)
+{
+ struct usb_composite_dev *cdev = c->cdev;
+ struct f_gether *geth = func_to_geth(f);
+ int status;
+ struct usb_ep *ep;
+
+ /* allocate instance-specific interface IDs */
+ status = usb_interface_id(c, f);
+ if (status < 0)
+ goto fail;
+ subset_data_intf.bInterfaceNumber = status;
+
+ status = -ENODEV;
+
+ /* allocate instance-specific endpoints */
+ ep = usb_ep_autoconfig(cdev->gadget, &fs_in_desc);
+ if (!ep)
+ goto fail;
+ geth->port.in_ep = ep;
+ ep->driver_data = cdev; /* claim */
+
+ ep = usb_ep_autoconfig(cdev->gadget, &fs_out_desc);
+ if (!ep)
+ goto fail;
+ geth->port.out_ep = ep;
+ ep->driver_data = cdev; /* claim */
+
+ /* copy descriptors, and track endpoint copies */
+ f->descriptors = usb_copy_descriptors(fs_eth_function);
+
+ geth->fs.in = usb_find_endpoint(fs_eth_function,
+ f->descriptors, &fs_in_desc);
+ geth->fs.out = usb_find_endpoint(fs_eth_function,
+ f->descriptors, &fs_out_desc);
+
+
+ /* support all relevant hardware speeds... we expect that when
+ * hardware is dual speed, all bulk-capable endpoints work at
+ * both speeds
+ */
+ if (gadget_is_dualspeed(c->cdev->gadget)) {
+ hs_in_desc.bEndpointAddress =
+ fs_in_desc.bEndpointAddress;
+ hs_out_desc.bEndpointAddress =
+ fs_out_desc.bEndpointAddress;
+
+ /* copy descriptors, and track endpoint copies */
+ f->hs_descriptors = usb_copy_descriptors(hs_eth_function);
+
+ geth->hs.in = usb_find_endpoint(hs_eth_function,
+ f->hs_descriptors, &hs_in_desc);
+ geth->hs.out = usb_find_endpoint(hs_eth_function,
+ f->hs_descriptors, &hs_out_desc);
+ }
+
+ /* NOTE: all that is done without knowing or caring about
+ * the network link ... which is unavailable to this code
+ * until we're activated via set_alt().
+ */
+
+ DBG(cdev, "CDC Subset: %s speed IN/%s OUT/%s\n",
+ gadget_is_dualspeed(c->cdev->gadget) ? "dual" : "full",
+ geth->port.in_ep->name, geth->port.out_ep->name);
+ return 0;
+
+fail:
+ /* we might as well release our claims on endpoints */
+ if (geth->port.out)
+ geth->port.out_ep->driver_data = NULL;
+ if (geth->port.in)
+ geth->port.in_ep->driver_data = NULL;
+
+ ERROR(cdev, "%s: can't bind, err %d\n", f->name, status);
+
+ return status;
+}
+
+static void
+geth_unbind(struct usb_configuration *c, struct usb_function *f)
+{
+ if (gadget_is_dualspeed(c->cdev->gadget))
+ usb_free_descriptors(f->hs_descriptors);
+ usb_free_descriptors(f->descriptors);
+ geth_string_defs[1].s = NULL;
+ kfree(func_to_geth(f));
+}
+
+/**
+ * geth_bind_config - add CDC Subset network link to a configuration
+ * @c: the configuration to support the network link
+ * @ethaddr: a buffer in which the ethernet address of the host side
+ * side of the link was recorded
+ * Context: single threaded during gadget setup
+ *
+ * Returns zero on success, else negative errno.
+ *
+ * Caller must have called @gether_setup(). Caller is also responsible
+ * for calling @gether_cleanup() before module unload.
+ */
+int __init geth_bind_config(struct usb_configuration *c, u8 ethaddr[ETH_ALEN])
+{
+ struct f_gether *geth;
+ int status;
+
+ if (!ethaddr)
+ return -EINVAL;
+
+ /* maybe allocate device-global string IDs */
+ if (geth_string_defs[0].id == 0) {
+
+ /* interface label */
+ status = usb_string_id(c->cdev);
+ if (status < 0)
+ return status;
+ geth_string_defs[0].id = status;
+ subset_data_intf.iInterface = status;
+
+ /* MAC address */
+ status = usb_string_id(c->cdev);
+ if (status < 0)
+ return status;
+ geth_string_defs[1].id = status;
+ ether_desc.iMACAddress = status;
+ }
+
+ /* allocate and initialize one new instance */
+ geth = kzalloc(sizeof *geth, GFP_KERNEL);
+ if (!geth)
+ return -ENOMEM;
+
+ /* export host's Ethernet address in CDC format */
+ snprintf(geth->ethaddr, sizeof geth->ethaddr,
+ "%02X%02X%02X%02X%02X%02X",
+ ethaddr[0], ethaddr[1], ethaddr[2],
+ ethaddr[3], ethaddr[4], ethaddr[5]);
+ geth_string_defs[1].s = geth->ethaddr;
+
+ geth->port.cdc_filter = DEFAULT_FILTER;
+
+ geth->port.func.name = "cdc_subset";
+ geth->port.func.strings = geth_strings;
+ geth->port.func.bind = geth_bind;
+ geth->port.func.unbind = geth_unbind;
+ geth->port.func.set_alt = geth_set_alt;
+ geth->port.func.disable = geth_disable;
+
+ status = usb_add_function(c, &geth->port.func);
+ if (status) {
+ geth_string_defs[1].s = NULL;
+ kfree(geth);
+ }
+ return status;
+}
diff --git a/drivers/usb/gadget/file_storage.c b/drivers/usb/gadget/file_storage.c
index 47bb9f09a1a..15c24edbb61 100644
--- a/drivers/usb/gadget/file_storage.c
+++ b/drivers/usb/gadget/file_storage.c
@@ -3867,8 +3867,8 @@ static int __init fsg_bind(struct usb_gadget *gadget)
curlun->dev.parent = &gadget->dev;
curlun->dev.driver = &fsg_driver.driver;
dev_set_drvdata(&curlun->dev, fsg);
- snprintf(curlun->dev.bus_id, BUS_ID_SIZE,
- "%s-lun%d", gadget->dev.bus_id, i);
+ dev_set_name(&curlun->dev,"%s-lun%d",
+ dev_name(&gadget->dev), i);
if ((rc = device_register(&curlun->dev)) != 0) {
INFO(fsg, "failed to register LUN%d: %d\n", i, rc);
diff --git a/drivers/usb/gadget/fsl_usb2_udc.c b/drivers/usb/gadget/fsl_usb2_udc.c
index 18687543d7f..1695382f30f 100644
--- a/drivers/usb/gadget/fsl_usb2_udc.c
+++ b/drivers/usb/gadget/fsl_usb2_udc.c
@@ -2331,7 +2331,7 @@ static int __init fsl_udc_probe(struct platform_device *pdev)
udc_controller->gadget.name = driver_name;
/* Setup gadget.dev and register with kernel */
- strcpy(udc_controller->gadget.dev.bus_id, "gadget");
+ dev_set_name(&udc_controller->gadget.dev, "gadget");
udc_controller->gadget.dev.release = fsl_udc_release;
udc_controller->gadget.dev.parent = &pdev->dev;
ret = device_register(&udc_controller->gadget.dev);
diff --git a/drivers/usb/gadget/g_zero.h b/drivers/usb/gadget/g_zero.h
new file mode 100644
index 00000000000..dd2f16ad5a8
--- /dev/null
+++ b/drivers/usb/gadget/g_zero.h
@@ -0,0 +1,25 @@
+/*
+ * This header declares the utility functions used by "Gadget Zero", plus
+ * interfaces to its two single-configuration function drivers.
+ */
+
+#ifndef __G_ZERO_H
+#define __G_ZERO_H
+
+#include <linux/usb/composite.h>
+
+/* global state */
+extern unsigned buflen;
+extern const struct usb_descriptor_header *otg_desc[];
+
+/* common utilities */
+struct usb_request *alloc_ep_req(struct usb_ep *ep);
+void free_ep_req(struct usb_ep *ep, struct usb_request *req);
+void disable_endpoints(struct usb_composite_dev *cdev,
+ struct usb_ep *in, struct usb_ep *out);
+
+/* configuration-specific linkup */
+int sourcesink_add(struct usb_composite_dev *cdev);
+int loopback_add(struct usb_composite_dev *cdev);
+
+#endif /* __G_ZERO_H */
diff --git a/drivers/usb/gadget/gadget_chips.h b/drivers/usb/gadget/gadget_chips.h
index ca5149ea731..5246e8fef2b 100644
--- a/drivers/usb/gadget/gadget_chips.h
+++ b/drivers/usb/gadget/gadget_chips.h
@@ -214,3 +214,26 @@ static inline int usb_gadget_controller_number(struct usb_gadget *gadget)
return 0x21;
return -ENOENT;
}
+
+
+/**
+ * gadget_supports_altsettings - return true if altsettings work
+ * @gadget: the gadget in question
+ */
+static inline bool gadget_supports_altsettings(struct usb_gadget *gadget)
+{
+ /* PXA 21x/25x/26x has no altsettings at all */
+ if (gadget_is_pxa(gadget))
+ return false;
+
+ /* PXA 27x and 3xx have *broken* altsetting support */
+ if (gadget_is_pxa27x(gadget))
+ return false;
+
+ /* SH3 hardware just doesn't do altsettings */
+ if (gadget_is_sh(gadget))
+ return false;
+
+ /* Everything else is *presumably* fine ... */
+ return true;
+}
diff --git a/drivers/usb/gadget/goku_udc.c b/drivers/usb/gadget/goku_udc.c
index be6613afedb..48f1c63b701 100644
--- a/drivers/usb/gadget/goku_udc.c
+++ b/drivers/usb/gadget/goku_udc.c
@@ -1790,7 +1790,7 @@ static int goku_probe(struct pci_dev *pdev, const struct pci_device_id *id)
dev->gadget.ops = &goku_ops;
/* the "gadget" abstracts/virtualizes the controller */
- strcpy(dev->gadget.dev.bus_id, "gadget");
+ dev_set_name(&dev->gadget.dev, "gadget");
dev->gadget.dev.parent = &pdev->dev;
dev->gadget.dev.dma_mask = pdev->dev.dma_mask;
dev->gadget.dev.release = gadget_release;
diff --git a/drivers/usb/gadget/inode.c b/drivers/usb/gadget/inode.c
index f132a9219e1..04692d59fc1 100644
--- a/drivers/usb/gadget/inode.c
+++ b/drivers/usb/gadget/inode.c
@@ -32,6 +32,7 @@
#include <asm/uaccess.h>
#include <linux/slab.h>
#include <linux/poll.h>
+#include <linux/smp_lock.h>
#include <linux/device.h>
#include <linux/moduleparam.h>
@@ -483,8 +484,7 @@ ep_release (struct inode *inode, struct file *fd)
return 0;
}
-static int ep_ioctl (struct inode *inode, struct file *fd,
- unsigned code, unsigned long value)
+static long ep_ioctl(struct file *fd, unsigned code, unsigned long value)
{
struct ep_data *data = fd->private_data;
int status;
@@ -740,7 +740,7 @@ static const struct file_operations ep_io_operations = {
.read = ep_read,
.write = ep_write,
- .ioctl = ep_ioctl,
+ .unlocked_ioctl = ep_ioctl,
.release = ep_release,
.aio_read = ep_aio_read,
@@ -1294,15 +1294,18 @@ out:
return mask;
}
-static int dev_ioctl (struct inode *inode, struct file *fd,
- unsigned code, unsigned long value)
+static long dev_ioctl (struct file *fd, unsigned code, unsigned long value)
{
struct dev_data *dev = fd->private_data;
struct usb_gadget *gadget = dev->gadget;
+ long ret = -ENOTTY;
- if (gadget->ops->ioctl)
- return gadget->ops->ioctl (gadget, code, value);
- return -ENOTTY;
+ if (gadget->ops->ioctl) {
+ lock_kernel();
+ ret = gadget->ops->ioctl (gadget, code, value);
+ unlock_kernel();
+ }
+ return ret;
}
/* used after device configuration */
@@ -1314,7 +1317,7 @@ static const struct file_operations ep0_io_operations = {
.write = ep0_write,
.fasync = ep0_fasync,
.poll = ep0_poll,
- .ioctl = dev_ioctl,
+ .unlocked_ioctl = dev_ioctl,
.release = dev_release,
};
@@ -1964,7 +1967,7 @@ static const struct file_operations dev_init_operations = {
.open = dev_open,
.write = dev_config,
.fasync = ep0_fasync,
- .ioctl = dev_ioctl,
+ .unlocked_ioctl = dev_ioctl,
.release = dev_release,
};
diff --git a/drivers/usb/gadget/lh7a40x_udc.c b/drivers/usb/gadget/lh7a40x_udc.c
index 825abd2621b..c6e7df04c69 100644
--- a/drivers/usb/gadget/lh7a40x_udc.c
+++ b/drivers/usb/gadget/lh7a40x_udc.c
@@ -1970,7 +1970,7 @@ static const struct usb_gadget_ops lh7a40x_udc_ops = {
static void nop_release(struct device *dev)
{
- DEBUG("%s %s\n", __func__, dev->bus_id);
+ DEBUG("%s %s\n", __func__, dev_name(dev));
}
static struct lh7a40x_udc memory = {
diff --git a/drivers/usb/gadget/m66592-udc.c b/drivers/usb/gadget/m66592-udc.c
index ee6b35fa870..8da7535c0c7 100644
--- a/drivers/usb/gadget/m66592-udc.c
+++ b/drivers/usb/gadget/m66592-udc.c
@@ -1593,7 +1593,7 @@ static int __init m66592_probe(struct platform_device *pdev)
m66592->gadget.ops = &m66592_gadget_ops;
device_initialize(&m66592->gadget.dev);
- strcpy(m66592->gadget.dev.bus_id, "gadget");
+ dev_set_name(&m66592->gadget, "gadget");
m66592->gadget.is_dualspeed = 1;
m66592->gadget.dev.parent = &pdev->dev;
m66592->gadget.dev.dma_mask = pdev->dev.dma_mask;
diff --git a/drivers/usb/gadget/ndis.h b/drivers/usb/gadget/ndis.h
index 09e3ee4eeae..df886cec5ef 100644
--- a/drivers/usb/gadget/ndis.h
+++ b/drivers/usb/gadget/ndis.h
@@ -1,11 +1,11 @@
/*
- * ndis.h
- *
+ * ndis.h
+ *
* ntddndis.h modified by Benedikt Spranger <b.spranger@pengutronix.de>
- *
- * Thanks to the cygwin development team,
+ *
+ * Thanks to the cygwin development team,
* espacially to Casper S. Hornstrup <chorns@users.sourceforge.net>
- *
+ *
* THIS SOFTWARE IS NOT COPYRIGHTED
*
* This source code is offered for use in the public domain. You may
diff --git a/drivers/usb/gadget/net2280.c b/drivers/usb/gadget/net2280.c
index e0186230016..b67ab677af7 100644
--- a/drivers/usb/gadget/net2280.c
+++ b/drivers/usb/gadget/net2280.c
@@ -2768,7 +2768,7 @@ static int net2280_probe (struct pci_dev *pdev, const struct pci_device_id *id)
dev->gadget.is_dualspeed = 1;
/* the "gadget" abstracts/virtualizes the controller */
- strcpy (dev->gadget.dev.bus_id, "gadget");
+ dev_set_name(&dev->gadget.dev, "gadget");
dev->gadget.dev.parent = &pdev->dev;
dev->gadget.dev.dma_mask = pdev->dev.dma_mask;
dev->gadget.dev.release = gadget_release;
diff --git a/drivers/usb/gadget/omap_udc.c b/drivers/usb/gadget/omap_udc.c
index 03a7f49d207..4b79a8509e8 100644
--- a/drivers/usb/gadget/omap_udc.c
+++ b/drivers/usb/gadget/omap_udc.c
@@ -2686,7 +2686,7 @@ omap_udc_setup(struct platform_device *odev, struct otg_transceiver *xceiv)
udc->gadget.name = driver_name;
device_initialize(&udc->gadget.dev);
- strcpy (udc->gadget.dev.bus_id, "gadget");
+ dev_set_name(&udc->gadget.dev, "gadget");
udc->gadget.dev.release = omap_udc_release;
udc->gadget.dev.parent = &odev->dev;
if (use_dma)
diff --git a/drivers/usb/gadget/printer.c b/drivers/usb/gadget/printer.c
index ec8f2eb041c..9caaec3ae9a 100644
--- a/drivers/usb/gadget/printer.c
+++ b/drivers/usb/gadget/printer.c
@@ -828,9 +828,8 @@ printer_poll(struct file *fd, poll_table *wait)
return status;
}
-static int
-printer_ioctl(struct inode *inode, struct file *fd, unsigned int code,
- unsigned long arg)
+static long
+printer_ioctl(struct file *fd, unsigned int code, unsigned long arg)
{
struct printer_dev *dev = fd->private_data;
unsigned long flags;
@@ -869,7 +868,7 @@ static struct file_operations printer_io_operations = {
.write = printer_write,
.fsync = printer_fsync,
.poll = printer_poll,
- .ioctl = printer_ioctl,
+ .unlocked_ioctl = printer_ioctl,
.release = printer_close
};
diff --git a/drivers/usb/gadget/pxa25x_udc.c b/drivers/usb/gadget/pxa25x_udc.c
index 031dceb9302..fbd6289977c 100644
--- a/drivers/usb/gadget/pxa25x_udc.c
+++ b/drivers/usb/gadget/pxa25x_udc.c
@@ -1818,7 +1818,7 @@ pxa25x_udc_irq(int irq, void *_dev)
static void nop_release (struct device *dev)
{
- DMSG("%s %s\n", __func__, dev->bus_id);
+ DMSG("%s %s\n", __func__, dev_name(dev));
}
/* this uses load-time allocation and initialization (instead of
diff --git a/drivers/usb/gadget/pxa27x_udc.c b/drivers/usb/gadget/pxa27x_udc.c
index 9c0e82ec5c4..9d447d8cfc0 100644
--- a/drivers/usb/gadget/pxa27x_udc.c
+++ b/drivers/usb/gadget/pxa27x_udc.c
@@ -1575,7 +1575,6 @@ static void udc_enable(struct pxa_udc *udc)
{
udc_writel(udc, UDCICR0, 0);
udc_writel(udc, UDCICR1, 0);
- udc_writel(udc, UP2OCR, UP2OCR_HXOE);
udc_clear_mask_UDCCR(udc, UDCCR_UDE);
clk_enable(udc->clk);
diff --git a/drivers/usb/gadget/rndis.c b/drivers/usb/gadget/rndis.c
index d0677f5d3cd..7228e856223 100644
--- a/drivers/usb/gadget/rndis.c
+++ b/drivers/usb/gadget/rndis.c
@@ -1,8 +1,6 @@
/*
* RNDIS MSG parser
*
- * Version: $Id: rndis.c,v 1.19 2004/03/25 21:33:46 robert Exp $
- *
* Authors: Benedikt Spranger, Pengutronix
* Robert Schwebel, Pengutronix
*
@@ -30,6 +28,7 @@
#include <linux/init.h>
#include <linux/list.h>
#include <linux/proc_fs.h>
+#include <linux/seq_file.h>
#include <linux/netdevice.h>
#include <asm/io.h>
@@ -38,9 +37,7 @@
#include <asm/unaligned.h>
-#undef RNDIS_PM
-#undef RNDIS_WAKEUP
-#undef VERBOSE
+#undef VERBOSE_DEBUG
#include "rndis.h"
@@ -96,9 +93,6 @@ static const u32 oid_supported_list [] =
OID_GEN_MAXIMUM_TOTAL_SIZE,
OID_GEN_MEDIA_CONNECT_STATUS,
OID_GEN_PHYSICAL_MEDIUM,
-#if 0
- OID_GEN_RNDIS_CONFIG_PARAMETER,
-#endif
/* the statistical stuff */
OID_GEN_XMIT_OK,
@@ -146,7 +140,14 @@ static const u32 oid_supported_list [] =
#endif /* RNDIS_OPTIONAL_STATS */
#ifdef RNDIS_PM
- /* PM and wakeup are mandatory for USB: */
+ /* PM and wakeup are "mandatory" for USB, but the RNDIS specs
+ * don't say what they mean ... and the NDIS specs are often
+ * confusing and/or ambiguous in this context. (That is, more
+ * so than their specs for the other OIDs.)
+ *
+ * FIXME someone who knows what these should do, please
+ * implement them!
+ */
/* power management */
OID_PNP_CAPABILITIES,
@@ -173,6 +174,8 @@ gen_ndis_query_resp (int configNr, u32 OID, u8 *buf, unsigned buf_len,
__le32 *outbuf;
int i, count;
rndis_query_cmplt_type *resp;
+ struct net_device *net;
+ struct net_device_stats *stats;
if (!r) return -ENOMEM;
resp = (rndis_query_cmplt_type *) r->buf;
@@ -194,6 +197,12 @@ gen_ndis_query_resp (int configNr, u32 OID, u8 *buf, unsigned buf_len,
outbuf = (__le32 *) &resp[1];
resp->InformationBufferOffset = __constant_cpu_to_le32 (16);
+ net = rndis_per_dev_params[configNr].dev;
+ if (net->get_stats)
+ stats = net->get_stats(net);
+ else
+ stats = NULL;
+
switch (OID) {
/* general oids (table 4-1) */
@@ -350,11 +359,9 @@ gen_ndis_query_resp (int configNr, u32 OID, u8 *buf, unsigned buf_len,
case OID_GEN_XMIT_OK:
if (rndis_debug > 1)
DBG("%s: OID_GEN_XMIT_OK\n", __func__);
- if (rndis_per_dev_params [configNr].stats) {
- *outbuf = cpu_to_le32 (
- rndis_per_dev_params [configNr].stats->tx_packets -
- rndis_per_dev_params [configNr].stats->tx_errors -
- rndis_per_dev_params [configNr].stats->tx_dropped);
+ if (stats) {
+ *outbuf = cpu_to_le32(stats->tx_packets
+ - stats->tx_errors - stats->tx_dropped);
retval = 0;
}
break;
@@ -363,11 +370,9 @@ gen_ndis_query_resp (int configNr, u32 OID, u8 *buf, unsigned buf_len,
case OID_GEN_RCV_OK:
if (rndis_debug > 1)
DBG("%s: OID_GEN_RCV_OK\n", __func__);
- if (rndis_per_dev_params [configNr].stats) {
- *outbuf = cpu_to_le32 (
- rndis_per_dev_params [configNr].stats->rx_packets -
- rndis_per_dev_params [configNr].stats->rx_errors -
- rndis_per_dev_params [configNr].stats->rx_dropped);
+ if (stats) {
+ *outbuf = cpu_to_le32(stats->rx_packets
+ - stats->rx_errors - stats->rx_dropped);
retval = 0;
}
break;
@@ -376,9 +381,8 @@ gen_ndis_query_resp (int configNr, u32 OID, u8 *buf, unsigned buf_len,
case OID_GEN_XMIT_ERROR:
if (rndis_debug > 1)
DBG("%s: OID_GEN_XMIT_ERROR\n", __func__);
- if (rndis_per_dev_params [configNr].stats) {
- *outbuf = cpu_to_le32 (rndis_per_dev_params [configNr]
- .stats->tx_errors);
+ if (stats) {
+ *outbuf = cpu_to_le32(stats->tx_errors);
retval = 0;
}
break;
@@ -387,9 +391,8 @@ gen_ndis_query_resp (int configNr, u32 OID, u8 *buf, unsigned buf_len,
case OID_GEN_RCV_ERROR:
if (rndis_debug > 1)
DBG("%s: OID_GEN_RCV_ERROR\n", __func__);
- if (rndis_per_dev_params [configNr].stats) {
- *outbuf = cpu_to_le32 (rndis_per_dev_params [configNr]
- .stats->rx_errors);
+ if (stats) {
+ *outbuf = cpu_to_le32(stats->rx_errors);
retval = 0;
}
break;
@@ -397,150 +400,12 @@ gen_ndis_query_resp (int configNr, u32 OID, u8 *buf, unsigned buf_len,
/* mandatory */
case OID_GEN_RCV_NO_BUFFER:
DBG("%s: OID_GEN_RCV_NO_BUFFER\n", __func__);
- if (rndis_per_dev_params [configNr].stats) {
- *outbuf = cpu_to_le32 (rndis_per_dev_params [configNr]
- .stats->rx_dropped);
- retval = 0;
- }
- break;
-
-#ifdef RNDIS_OPTIONAL_STATS
- case OID_GEN_DIRECTED_BYTES_XMIT:
- DBG("%s: OID_GEN_DIRECTED_BYTES_XMIT\n", __func__);
- /*
- * Aunt Tilly's size of shoes
- * minus antarctica count of penguins
- * divided by weight of Alpha Centauri
- */
- if (rndis_per_dev_params [configNr].stats) {
- *outbuf = cpu_to_le32 (
- (rndis_per_dev_params [configNr]
- .stats->tx_packets -
- rndis_per_dev_params [configNr]
- .stats->tx_errors -
- rndis_per_dev_params [configNr]
- .stats->tx_dropped)
- * 123);
- retval = 0;
- }
- break;
-
- case OID_GEN_DIRECTED_FRAMES_XMIT:
- DBG("%s: OID_GEN_DIRECTED_FRAMES_XMIT\n", __func__);
- /* dito */
- if (rndis_per_dev_params [configNr].stats) {
- *outbuf = cpu_to_le32 (
- (rndis_per_dev_params [configNr]
- .stats->tx_packets -
- rndis_per_dev_params [configNr]
- .stats->tx_errors -
- rndis_per_dev_params [configNr]
- .stats->tx_dropped)
- / 123);
- retval = 0;
- }
- break;
-
- case OID_GEN_MULTICAST_BYTES_XMIT:
- DBG("%s: OID_GEN_MULTICAST_BYTES_XMIT\n", __func__);
- if (rndis_per_dev_params [configNr].stats) {
- *outbuf = cpu_to_le32 (rndis_per_dev_params [configNr]
- .stats->multicast*1234);
- retval = 0;
- }
- break;
-
- case OID_GEN_MULTICAST_FRAMES_XMIT:
- DBG("%s: OID_GEN_MULTICAST_FRAMES_XMIT\n", __func__);
- if (rndis_per_dev_params [configNr].stats) {
- *outbuf = cpu_to_le32 (rndis_per_dev_params [configNr]
- .stats->multicast);
- retval = 0;
- }
- break;
-
- case OID_GEN_BROADCAST_BYTES_XMIT:
- DBG("%s: OID_GEN_BROADCAST_BYTES_XMIT\n", __func__);
- if (rndis_per_dev_params [configNr].stats) {
- *outbuf = cpu_to_le32 (rndis_per_dev_params [configNr]
- .stats->tx_packets/42*255);
- retval = 0;
- }
- break;
-
- case OID_GEN_BROADCAST_FRAMES_XMIT:
- DBG("%s: OID_GEN_BROADCAST_FRAMES_XMIT\n", __func__);
- if (rndis_per_dev_params [configNr].stats) {
- *outbuf = cpu_to_le32 (rndis_per_dev_params [configNr]
- .stats->tx_packets/42);
- retval = 0;
- }
- break;
-
- case OID_GEN_DIRECTED_BYTES_RCV:
- DBG("%s: OID_GEN_DIRECTED_BYTES_RCV\n", __func__);
- *outbuf = __constant_cpu_to_le32 (0);
- retval = 0;
- break;
-
- case OID_GEN_DIRECTED_FRAMES_RCV:
- DBG("%s: OID_GEN_DIRECTED_FRAMES_RCV\n", __func__);
- *outbuf = __constant_cpu_to_le32 (0);
- retval = 0;
- break;
-
- case OID_GEN_MULTICAST_BYTES_RCV:
- DBG("%s: OID_GEN_MULTICAST_BYTES_RCV\n", __func__);
- if (rndis_per_dev_params [configNr].stats) {
- *outbuf = cpu_to_le32 (rndis_per_dev_params [configNr]
- .stats->multicast * 1111);
- retval = 0;
- }
- break;
-
- case OID_GEN_MULTICAST_FRAMES_RCV:
- DBG("%s: OID_GEN_MULTICAST_FRAMES_RCV\n", __func__);
- if (rndis_per_dev_params [configNr].stats) {
- *outbuf = cpu_to_le32 (rndis_per_dev_params [configNr]
- .stats->multicast);
- retval = 0;
- }
- break;
-
- case OID_GEN_BROADCAST_BYTES_RCV:
- DBG("%s: OID_GEN_BROADCAST_BYTES_RCV\n", __func__);
- if (rndis_per_dev_params [configNr].stats) {
- *outbuf = cpu_to_le32 (rndis_per_dev_params [configNr]
- .stats->rx_packets/42*255);
- retval = 0;
- }
- break;
-
- case OID_GEN_BROADCAST_FRAMES_RCV:
- DBG("%s: OID_GEN_BROADCAST_FRAMES_RCV\n", __func__);
- if (rndis_per_dev_params [configNr].stats) {
- *outbuf = cpu_to_le32 (rndis_per_dev_params [configNr]
- .stats->rx_packets/42);
+ if (stats) {
+ *outbuf = cpu_to_le32(stats->rx_dropped);
retval = 0;
}
break;
- case OID_GEN_RCV_CRC_ERROR:
- DBG("%s: OID_GEN_RCV_CRC_ERROR\n", __func__);
- if (rndis_per_dev_params [configNr].stats) {
- *outbuf = cpu_to_le32 (rndis_per_dev_params [configNr]
- .stats->rx_crc_errors);
- retval = 0;
- }
- break;
-
- case OID_GEN_TRANSMIT_QUEUE_LENGTH:
- DBG("%s: OID_GEN_TRANSMIT_QUEUE_LENGTH\n", __func__);
- *outbuf = __constant_cpu_to_le32 (0);
- retval = 0;
- break;
-#endif /* RNDIS_OPTIONAL_STATS */
-
/* ieee802.3 OIDs (table 4-3) */
/* mandatory */
@@ -592,9 +457,8 @@ gen_ndis_query_resp (int configNr, u32 OID, u8 *buf, unsigned buf_len,
/* mandatory */
case OID_802_3_RCV_ERROR_ALIGNMENT:
DBG("%s: OID_802_3_RCV_ERROR_ALIGNMENT\n", __func__);
- if (rndis_per_dev_params [configNr].stats) {
- *outbuf = cpu_to_le32 (rndis_per_dev_params [configNr]
- .stats->rx_frame_errors);
+ if (stats) {
+ *outbuf = cpu_to_le32(stats->rx_frame_errors);
retval = 0;
}
break;
@@ -613,64 +477,6 @@ gen_ndis_query_resp (int configNr, u32 OID, u8 *buf, unsigned buf_len,
retval = 0;
break;
-#ifdef RNDIS_OPTIONAL_STATS
- case OID_802_3_XMIT_DEFERRED:
- DBG("%s: OID_802_3_XMIT_DEFERRED\n", __func__);
- /* TODO */
- break;
-
- case OID_802_3_XMIT_MAX_COLLISIONS:
- DBG("%s: OID_802_3_XMIT_MAX_COLLISIONS\n", __func__);
- /* TODO */
- break;
-
- case OID_802_3_RCV_OVERRUN:
- DBG("%s: OID_802_3_RCV_OVERRUN\n", __func__);
- /* TODO */
- break;
-
- case OID_802_3_XMIT_UNDERRUN:
- DBG("%s: OID_802_3_XMIT_UNDERRUN\n", __func__);
- /* TODO */
- break;
-
- case OID_802_3_XMIT_HEARTBEAT_FAILURE:
- DBG("%s: OID_802_3_XMIT_HEARTBEAT_FAILURE\n", __func__);
- /* TODO */
- break;
-
- case OID_802_3_XMIT_TIMES_CRS_LOST:
- DBG("%s: OID_802_3_XMIT_TIMES_CRS_LOST\n", __func__);
- /* TODO */
- break;
-
- case OID_802_3_XMIT_LATE_COLLISIONS:
- DBG("%s: OID_802_3_XMIT_LATE_COLLISIONS\n", __func__);
- /* TODO */
- break;
-#endif /* RNDIS_OPTIONAL_STATS */
-
-#ifdef RNDIS_PM
- /* power management OIDs (table 4-5) */
- case OID_PNP_CAPABILITIES:
- DBG("%s: OID_PNP_CAPABILITIES\n", __func__);
-
- /* for now, no wakeup capabilities */
- length = sizeof (struct NDIS_PNP_CAPABILITIES);
- memset(outbuf, 0, length);
- retval = 0;
- break;
- case OID_PNP_QUERY_POWER:
- DBG("%s: OID_PNP_QUERY_POWER D%d\n", __func__,
- get_unaligned_le32(buf) - 1);
- /* only suspend is a real power state, and
- * it can't be entered by OID_PNP_SET_POWER...
- */
- length = 0;
- retval = 0;
- break;
-#endif
-
default:
pr_warning("%s: query unknown OID 0x%08X\n",
__func__, OID);
@@ -726,9 +532,6 @@ static int gen_ndis_set_resp (u8 configNr, u32 OID, u8 *buf, u32 buf_len,
* what makes the packet flow start and stop, like
* activating the CDC Ethernet altsetting.
*/
-#ifdef RNDIS_PM
-update_linkstate:
-#endif
retval = 0;
if (*params->filter) {
params->state = RNDIS_DATA_INITIALIZED;
@@ -747,49 +550,6 @@ update_linkstate:
DBG("%s: OID_802_3_MULTICAST_LIST\n", __func__);
retval = 0;
break;
-#if 0
- case OID_GEN_RNDIS_CONFIG_PARAMETER:
- {
- struct rndis_config_parameter *param;
- param = (struct rndis_config_parameter *) buf;
- DBG("%s: OID_GEN_RNDIS_CONFIG_PARAMETER '%*s'\n",
- __func__,
- min(cpu_to_le32(param->ParameterNameLength),80),
- buf + param->ParameterNameOffset);
- retval = 0;
- }
- break;
-#endif
-
-#ifdef RNDIS_PM
- case OID_PNP_SET_POWER:
- /* The only real power state is USB suspend, and RNDIS requests
- * can't enter it; this one isn't really about power. After
- * resuming, Windows forces a reset, and then SET_POWER D0.
- * FIXME ... then things go batty; Windows wedges itself.
- */
- i = get_unaligned_le32(buf);
- DBG("%s: OID_PNP_SET_POWER D%d\n", __func__, i - 1);
- switch (i) {
- case NdisDeviceStateD0:
- *params->filter = params->saved_filter;
- goto update_linkstate;
- case NdisDeviceStateD3:
- case NdisDeviceStateD2:
- case NdisDeviceStateD1:
- params->saved_filter = *params->filter;
- retval = 0;
- break;
- }
- break;
-
-#ifdef RNDIS_WAKEUP
- // no wakeup support advertised, so wakeup OIDs always fail:
- // - OID_PNP_ENABLE_WAKE_UP
- // - OID_PNP_{ADD,REMOVE}_WAKE_UP_PATTERN
-#endif
-
-#endif /* RNDIS_PM */
default:
pr_warning("%s: set unknown OID 0x%08X, size %d\n",
@@ -807,8 +567,10 @@ static int rndis_init_response (int configNr, rndis_init_msg_type *buf)
{
rndis_init_cmplt_type *resp;
rndis_resp_t *r;
+ struct rndis_params *params = rndis_per_dev_params + configNr;
- if (!rndis_per_dev_params [configNr].dev) return -ENOTSUPP;
+ if (!params->dev)
+ return -ENOTSUPP;
r = rndis_add_response (configNr, sizeof (rndis_init_cmplt_type));
if (!r)
@@ -826,7 +588,7 @@ static int rndis_init_response (int configNr, rndis_init_msg_type *buf)
resp->Medium = __constant_cpu_to_le32 (RNDIS_MEDIUM_802_3);
resp->MaxPacketsPerTransfer = __constant_cpu_to_le32 (1);
resp->MaxTransferSize = cpu_to_le32 (
- rndis_per_dev_params [configNr].dev->mtu
+ params->dev->mtu
+ sizeof (struct ethhdr)
+ sizeof (struct rndis_packet_msg_type)
+ 22);
@@ -834,10 +596,7 @@ static int rndis_init_response (int configNr, rndis_init_msg_type *buf)
resp->AFListOffset = __constant_cpu_to_le32 (0);
resp->AFListSize = __constant_cpu_to_le32 (0);
- if (rndis_per_dev_params [configNr].ack)
- rndis_per_dev_params [configNr].ack (
- rndis_per_dev_params [configNr].dev);
-
+ params->resp_avail(params->v);
return 0;
}
@@ -845,9 +604,11 @@ static int rndis_query_response (int configNr, rndis_query_msg_type *buf)
{
rndis_query_cmplt_type *resp;
rndis_resp_t *r;
+ struct rndis_params *params = rndis_per_dev_params + configNr;
// DBG("%s: OID = %08X\n", __func__, cpu_to_le32(buf->OID));
- if (!rndis_per_dev_params [configNr].dev) return -ENOTSUPP;
+ if (!params->dev)
+ return -ENOTSUPP;
/*
* we need more memory:
@@ -878,9 +639,7 @@ static int rndis_query_response (int configNr, rndis_query_msg_type *buf)
} else
resp->Status = __constant_cpu_to_le32 (RNDIS_STATUS_SUCCESS);
- if (rndis_per_dev_params [configNr].ack)
- rndis_per_dev_params [configNr].ack (
- rndis_per_dev_params [configNr].dev);
+ params->resp_avail(params->v);
return 0;
}
@@ -889,6 +648,7 @@ static int rndis_set_response (int configNr, rndis_set_msg_type *buf)
u32 BufLength, BufOffset;
rndis_set_cmplt_type *resp;
rndis_resp_t *r;
+ struct rndis_params *params = rndis_per_dev_params + configNr;
r = rndis_add_response (configNr, sizeof (rndis_set_cmplt_type));
if (!r)
@@ -898,7 +658,7 @@ static int rndis_set_response (int configNr, rndis_set_msg_type *buf)
BufLength = le32_to_cpu (buf->InformationBufferLength);
BufOffset = le32_to_cpu (buf->InformationBufferOffset);
-#ifdef VERBOSE
+#ifdef VERBOSE_DEBUG
DBG("%s: Length: %d\n", __func__, BufLength);
DBG("%s: Offset: %d\n", __func__, BufOffset);
DBG("%s: InfoBuffer: ", __func__);
@@ -919,10 +679,7 @@ static int rndis_set_response (int configNr, rndis_set_msg_type *buf)
else
resp->Status = __constant_cpu_to_le32 (RNDIS_STATUS_SUCCESS);
- if (rndis_per_dev_params [configNr].ack)
- rndis_per_dev_params [configNr].ack (
- rndis_per_dev_params [configNr].dev);
-
+ params->resp_avail(params->v);
return 0;
}
@@ -930,6 +687,7 @@ static int rndis_reset_response (int configNr, rndis_reset_msg_type *buf)
{
rndis_reset_cmplt_type *resp;
rndis_resp_t *r;
+ struct rndis_params *params = rndis_per_dev_params + configNr;
r = rndis_add_response (configNr, sizeof (rndis_reset_cmplt_type));
if (!r)
@@ -942,10 +700,7 @@ static int rndis_reset_response (int configNr, rndis_reset_msg_type *buf)
/* resent information */
resp->AddressingReset = __constant_cpu_to_le32 (1);
- if (rndis_per_dev_params [configNr].ack)
- rndis_per_dev_params [configNr].ack (
- rndis_per_dev_params [configNr].dev);
-
+ params->resp_avail(params->v);
return 0;
}
@@ -954,6 +709,7 @@ static int rndis_keepalive_response (int configNr,
{
rndis_keepalive_cmplt_type *resp;
rndis_resp_t *r;
+ struct rndis_params *params = rndis_per_dev_params + configNr;
/* host "should" check only in RNDIS_DATA_INITIALIZED state */
@@ -968,10 +724,7 @@ static int rndis_keepalive_response (int configNr,
resp->RequestID = buf->RequestID; /* Still LE in msg buffer */
resp->Status = __constant_cpu_to_le32 (RNDIS_STATUS_SUCCESS);
- if (rndis_per_dev_params [configNr].ack)
- rndis_per_dev_params [configNr].ack (
- rndis_per_dev_params [configNr].dev);
-
+ params->resp_avail(params->v);
return 0;
}
@@ -983,8 +736,9 @@ static int rndis_indicate_status_msg (int configNr, u32 status)
{
rndis_indicate_status_msg_type *resp;
rndis_resp_t *r;
+ struct rndis_params *params = rndis_per_dev_params + configNr;
- if (rndis_per_dev_params [configNr].state == RNDIS_UNINITIALIZED)
+ if (params->state == RNDIS_UNINITIALIZED)
return -ENOTSUPP;
r = rndis_add_response (configNr,
@@ -1000,9 +754,7 @@ static int rndis_indicate_status_msg (int configNr, u32 status)
resp->StatusBufferLength = __constant_cpu_to_le32 (0);
resp->StatusBufferOffset = __constant_cpu_to_le32 (0);
- if (rndis_per_dev_params [configNr].ack)
- rndis_per_dev_params [configNr].ack (
- rndis_per_dev_params [configNr].dev);
+ params->resp_avail(params->v);
return 0;
}
@@ -1029,7 +781,6 @@ void rndis_uninit (int configNr)
if (configNr >= RNDIS_MAX_CONFIGS)
return;
- rndis_per_dev_params [configNr].used = 0;
rndis_per_dev_params [configNr].state = RNDIS_UNINITIALIZED;
/* drain the response queue */
@@ -1142,21 +893,25 @@ int rndis_msg_parser (u8 configNr, u8 *buf)
return -ENOTSUPP;
}
-int rndis_register (int (* rndis_control_ack) (struct net_device *))
+int rndis_register(void (*resp_avail)(void *v), void *v)
{
u8 i;
+ if (!resp_avail)
+ return -EINVAL;
+
for (i = 0; i < RNDIS_MAX_CONFIGS; i++) {
if (!rndis_per_dev_params [i].used) {
rndis_per_dev_params [i].used = 1;
- rndis_per_dev_params [i].ack = rndis_control_ack;
+ rndis_per_dev_params [i].resp_avail = resp_avail;
+ rndis_per_dev_params [i].v = v;
DBG("%s: configNr = %d\n", __func__, i);
return i;
}
}
DBG("failed\n");
- return -1;
+ return -ENODEV;
}
void rndis_deregister (int configNr)
@@ -1169,16 +924,14 @@ void rndis_deregister (int configNr)
return;
}
-int rndis_set_param_dev (u8 configNr, struct net_device *dev,
- struct net_device_stats *stats,
- u16 *cdc_filter)
+int rndis_set_param_dev(u8 configNr, struct net_device *dev, u16 *cdc_filter)
{
DBG("%s:\n", __func__ );
- if (!dev || !stats) return -1;
+ if (!dev)
+ return -EINVAL;
if (configNr >= RNDIS_MAX_CONFIGS) return -1;
rndis_per_dev_params [configNr].dev = dev;
- rndis_per_dev_params [configNr].stats = stats;
rndis_per_dev_params [configNr].filter = cdc_filter;
return 0;
@@ -1296,14 +1049,11 @@ int rndis_rm_hdr(struct sk_buff *skb)
#ifdef CONFIG_USB_GADGET_DEBUG_FILES
-static int rndis_proc_read (char *page, char **start, off_t off, int count, int *eof,
- void *data)
+static int rndis_proc_show(struct seq_file *m, void *v)
{
- char *out = page;
- int len;
- rndis_params *param = (rndis_params *) data;
+ rndis_params *param = m->private;
- out += snprintf (out, count,
+ seq_printf(m,
"Config Nr. %d\n"
"used : %s\n"
"state : %s\n"
@@ -1326,25 +1076,13 @@ static int rndis_proc_read (char *page, char **start, off_t off, int count, int
(param->media_state) ? 0 : param->speed*100,
(param->media_state) ? "disconnected" : "connected",
param->vendorID, param->vendorDescr);
-
- len = out - page;
- len -= off;
-
- if (len < count) {
- *eof = 1;
- if (len <= 0)
- return 0;
- } else
- len = count;
-
- *start = page + off;
- return len;
+ return 0;
}
-static int rndis_proc_write (struct file *file, const char __user *buffer,
- unsigned long count, void *data)
+static ssize_t rndis_proc_write(struct file *file, const char __user *buffer,
+ size_t count, loff_t *ppos)
{
- rndis_params *p = data;
+ rndis_params *p = PDE(file->f_path.dentry->d_inode)->data;
u32 speed = 0;
int i, fl_speed = 0;
@@ -1386,6 +1124,20 @@ static int rndis_proc_write (struct file *file, const char __user *buffer,
return count;
}
+static int rndis_proc_open(struct inode *inode, struct file *file)
+{
+ return single_open(file, rndis_proc_show, PDE(inode)->data);
+}
+
+static const struct file_operations rndis_proc_fops = {
+ .owner = THIS_MODULE,
+ .open = rndis_proc_open,
+ .read = seq_read,
+ .llseek = seq_lseek,
+ .release = single_release,
+ .write = rndis_proc_write,
+};
+
#define NAME_TEMPLATE "driver/rndis-%03d"
static struct proc_dir_entry *rndis_connect_state [RNDIS_MAX_CONFIGS];
@@ -1403,7 +1155,9 @@ int __init rndis_init (void)
sprintf (name, NAME_TEMPLATE, i);
if (!(rndis_connect_state [i]
- = create_proc_entry (name, 0660, NULL)))
+ = proc_create_data(name, 0660, NULL,
+ &rndis_proc_fops,
+ (void *)(rndis_per_dev_params + i))))
{
DBG("%s :remove entries", __func__);
while (i) {
@@ -1413,11 +1167,6 @@ int __init rndis_init (void)
DBG("\n");
return -EIO;
}
-
- rndis_connect_state [i]->write_proc = rndis_proc_write;
- rndis_connect_state [i]->read_proc = rndis_proc_read;
- rndis_connect_state [i]->data = (void *)
- (rndis_per_dev_params + i);
#endif
rndis_per_dev_params [i].confignr = i;
rndis_per_dev_params [i].used = 0;
diff --git a/drivers/usb/gadget/rndis.h b/drivers/usb/gadget/rndis.h
index 397b149f3ca..aac61dfe0f0 100644
--- a/drivers/usb/gadget/rndis.h
+++ b/drivers/usb/gadget/rndis.h
@@ -1,8 +1,6 @@
/*
* RNDIS Definitions for Remote NDIS
*
- * Version: $Id: rndis.h,v 1.15 2004/03/25 21:33:46 robert Exp $
- *
* Authors: Benedikt Spranger, Pengutronix
* Robert Schwebel, Pengutronix
*
@@ -235,20 +233,19 @@ typedef struct rndis_params
const u8 *host_mac;
u16 *filter;
struct net_device *dev;
- struct net_device_stats *stats;
u32 vendorID;
const char *vendorDescr;
- int (*ack) (struct net_device *);
+ void (*resp_avail)(void *v);
+ void *v;
struct list_head resp_queue;
} rndis_params;
/* RNDIS Message parser and other useless functions */
int rndis_msg_parser (u8 configNr, u8 *buf);
-int rndis_register (int (*rndis_control_ack) (struct net_device *));
+int rndis_register(void (*resp_avail)(void *v), void *v);
void rndis_deregister (int configNr);
int rndis_set_param_dev (u8 configNr, struct net_device *dev,
- struct net_device_stats *stats,
u16 *cdc_filter);
int rndis_set_param_vendor (u8 configNr, u32 vendorID,
const char *vendorDescr);
diff --git a/drivers/usb/gadget/serial.c b/drivers/usb/gadget/serial.c
index fa019fa7333..b3699afff00 100644
--- a/drivers/usb/gadget/serial.c
+++ b/drivers/usb/gadget/serial.c
@@ -1,15 +1,9 @@
/*
- * g_serial.c -- USB gadget serial driver
+ * serial.c -- USB gadget serial driver
*
- * Copyright 2003 (C) Al Borchers (alborchers@steinerpoint.com)
- *
- * This code is based in part on the Gadget Zero driver, which
- * is Copyright (C) 2003 by David Brownell, all rights reserved.
- *
- * This code also borrows from usbserial.c, which is
- * Copyright (C) 1999 - 2002 Greg Kroah-Hartman (greg@kroah.com)
- * Copyright (C) 2000 Peter Berger (pberger@brimson.com)
- * Copyright (C) 2000 Al Borchers (alborchers@steinerpoint.com)
+ * Copyright (C) 2003 Al Borchers (alborchers@steinerpoint.com)
+ * Copyright (C) 2008 by David Brownell
+ * Copyright (C) 2008 by Nokia Corporation
*
* This software is distributed under the terms of the GNU General
* Public License ("GPL") as published by the Free Software Foundation,
@@ -22,2254 +16,237 @@
#include <linux/tty.h>
#include <linux/tty_flip.h>
-#include <linux/usb/ch9.h>
-#include <linux/usb/cdc.h>
-#include <linux/usb/gadget.h>
-
+#include "u_serial.h"
#include "gadget_chips.h"
/* Defines */
-#define GS_VERSION_STR "v2.2"
-#define GS_VERSION_NUM 0x2200
+#define GS_VERSION_STR "v2.4"
+#define GS_VERSION_NUM 0x2400
#define GS_LONG_NAME "Gadget Serial"
-#define GS_SHORT_NAME "g_serial"
-
-#define GS_MAJOR 127
-#define GS_MINOR_START 0
-
-/* REVISIT only one port is supported for now;
- * see gs_{send,recv}_packet() ... no multiplexing,
- * and no support for multiple ACM devices.
- */
-#define GS_NUM_PORTS 1
-
-#define GS_NUM_CONFIGS 1
-#define GS_NO_CONFIG_ID 0
-#define GS_BULK_CONFIG_ID 1
-#define GS_ACM_CONFIG_ID 2
-
-#define GS_MAX_NUM_INTERFACES 2
-#define GS_BULK_INTERFACE_ID 0
-#define GS_CONTROL_INTERFACE_ID 0
-#define GS_DATA_INTERFACE_ID 1
-
-#define GS_MAX_DESC_LEN 256
-
-#define GS_DEFAULT_READ_Q_SIZE 32
-#define GS_DEFAULT_WRITE_Q_SIZE 32
-
-#define GS_DEFAULT_WRITE_BUF_SIZE 8192
-#define GS_TMP_BUF_SIZE 8192
-
-#define GS_CLOSE_TIMEOUT 15
-
-#define GS_DEFAULT_USE_ACM 0
-
-/* 9600-8-N-1 ... matches init_termios.c_cflag and defaults
- * expected by "usbser.sys" on MS-Windows.
- */
-#define GS_DEFAULT_DTE_RATE 9600
-#define GS_DEFAULT_DATA_BITS 8
-#define GS_DEFAULT_PARITY USB_CDC_NO_PARITY
-#define GS_DEFAULT_CHAR_FORMAT USB_CDC_1_STOP_BITS
-
-/* maxpacket and other transfer characteristics vary by speed. */
-static inline struct usb_endpoint_descriptor *
-choose_ep_desc(struct usb_gadget *g, struct usb_endpoint_descriptor *hs,
- struct usb_endpoint_descriptor *fs)
-{
- if (gadget_is_dualspeed(g) && g->speed == USB_SPEED_HIGH)
- return hs;
- return fs;
-}
-
-
-/* debug settings */
-#ifdef DEBUG
-static int debug = 1;
-#else
-#define debug 0
-#endif
-
-#define gs_debug(format, arg...) \
- do { if (debug) pr_debug(format, ## arg); } while (0)
-#define gs_debug_level(level, format, arg...) \
- do { if (debug >= level) pr_debug(format, ## arg); } while (0)
+#define GS_VERSION_NAME GS_LONG_NAME " " GS_VERSION_STR
+/*-------------------------------------------------------------------------*/
/* Thanks to NetChip Technologies for donating this product ID.
- *
- * DO NOT REUSE THESE IDs with a protocol-incompatible driver!! Ever!!
- * Instead: allocate your own, using normal USB-IF procedures.
- */
+*
+* DO NOT REUSE THESE IDs with a protocol-incompatible driver!! Ever!!
+* Instead: allocate your own, using normal USB-IF procedures.
+*/
#define GS_VENDOR_ID 0x0525 /* NetChip */
#define GS_PRODUCT_ID 0xa4a6 /* Linux-USB Serial Gadget */
#define GS_CDC_PRODUCT_ID 0xa4a7 /* ... as CDC-ACM */
-#define GS_LOG2_NOTIFY_INTERVAL 5 /* 1 << 5 == 32 msec */
-#define GS_NOTIFY_MAXPACKET 8
+/* string IDs are assigned dynamically */
+#define STRING_MANUFACTURER_IDX 0
+#define STRING_PRODUCT_IDX 1
+#define STRING_DESCRIPTION_IDX 2
-/* circular buffer */
-struct gs_buf {
- unsigned int buf_size;
- char *buf_buf;
- char *buf_get;
- char *buf_put;
-};
+static char manufacturer[50];
-/* the port structure holds info for each port, one for each minor number */
-struct gs_port {
- struct gs_dev *port_dev; /* pointer to device struct */
- struct tty_struct *port_tty; /* pointer to tty struct */
- spinlock_t port_lock;
- int port_num;
- int port_open_count;
- int port_in_use; /* open/close in progress */
- wait_queue_head_t port_write_wait;/* waiting to write */
- struct gs_buf *port_write_buf;
- struct usb_cdc_line_coding port_line_coding; /* 8-N-1 etc */
- u16 port_handshake_bits;
-#define RS232_RTS (1 << 1)
-#define RS232_DTE (1 << 0)
+static struct usb_string strings_dev[] = {
+ [STRING_MANUFACTURER_IDX].s = manufacturer,
+ [STRING_PRODUCT_IDX].s = GS_VERSION_NAME,
+ [STRING_DESCRIPTION_IDX].s = NULL /* updated; f(use_acm) */,
+ { } /* end of list */
};
-/* the device structure holds info for the USB device */
-struct gs_dev {
- struct usb_gadget *dev_gadget; /* gadget device pointer */
- spinlock_t dev_lock; /* lock for set/reset config */
- int dev_config; /* configuration number */
- struct usb_ep *dev_notify_ep; /* address of notify endpoint */
- struct usb_ep *dev_in_ep; /* address of in endpoint */
- struct usb_ep *dev_out_ep; /* address of out endpoint */
- struct usb_endpoint_descriptor /* descriptor of notify ep */
- *dev_notify_ep_desc;
- struct usb_endpoint_descriptor /* descriptor of in endpoint */
- *dev_in_ep_desc;
- struct usb_endpoint_descriptor /* descriptor of out endpoint */
- *dev_out_ep_desc;
- struct usb_request *dev_ctrl_req; /* control request */
- struct list_head dev_req_list; /* list of write requests */
- int dev_sched_port; /* round robin port scheduled */
- struct gs_port *dev_port[GS_NUM_PORTS]; /* the ports */
+static struct usb_gadget_strings stringtab_dev = {
+ .language = 0x0409, /* en-us */
+ .strings = strings_dev,
};
-
-/* Functions */
-
-/* tty driver internals */
-static int gs_send(struct gs_dev *dev);
-static int gs_send_packet(struct gs_dev *dev, char *packet,
- unsigned int size);
-static int gs_recv_packet(struct gs_dev *dev, char *packet,
- unsigned int size);
-static void gs_read_complete(struct usb_ep *ep, struct usb_request *req);
-static void gs_write_complete(struct usb_ep *ep, struct usb_request *req);
-
-/* gadget driver internals */
-static int gs_set_config(struct gs_dev *dev, unsigned config);
-static void gs_reset_config(struct gs_dev *dev);
-static int gs_build_config_buf(u8 *buf, struct usb_gadget *g,
- u8 type, unsigned int index, int is_otg);
-
-static struct usb_request *gs_alloc_req(struct usb_ep *ep, unsigned int len,
- gfp_t kmalloc_flags);
-static void gs_free_req(struct usb_ep *ep, struct usb_request *req);
-
-static int gs_alloc_ports(struct gs_dev *dev, gfp_t kmalloc_flags);
-static void gs_free_ports(struct gs_dev *dev);
-
-/* circular buffer */
-static struct gs_buf *gs_buf_alloc(unsigned int size, gfp_t kmalloc_flags);
-static void gs_buf_free(struct gs_buf *gb);
-static void gs_buf_clear(struct gs_buf *gb);
-static unsigned int gs_buf_data_avail(struct gs_buf *gb);
-static unsigned int gs_buf_space_avail(struct gs_buf *gb);
-static unsigned int gs_buf_put(struct gs_buf *gb, const char *buf,
- unsigned int count);
-static unsigned int gs_buf_get(struct gs_buf *gb, char *buf,
- unsigned int count);
-
-
-/* Globals */
-
-static struct gs_dev *gs_device;
-
-static struct mutex gs_open_close_lock[GS_NUM_PORTS];
-
-
-/*-------------------------------------------------------------------------*/
-
-/* USB descriptors */
-
-#define GS_MANUFACTURER_STR_ID 1
-#define GS_PRODUCT_STR_ID 2
-#define GS_SERIAL_STR_ID 3
-#define GS_BULK_CONFIG_STR_ID 4
-#define GS_ACM_CONFIG_STR_ID 5
-#define GS_CONTROL_STR_ID 6
-#define GS_DATA_STR_ID 7
-
-/* static strings, in UTF-8 */
-static char manufacturer[50];
-static struct usb_string gs_strings[] = {
- { GS_MANUFACTURER_STR_ID, manufacturer },
- { GS_PRODUCT_STR_ID, GS_LONG_NAME },
- { GS_BULK_CONFIG_STR_ID, "Gadget Serial Bulk" },
- { GS_ACM_CONFIG_STR_ID, "Gadget Serial CDC ACM" },
- { GS_CONTROL_STR_ID, "Gadget Serial Control" },
- { GS_DATA_STR_ID, "Gadget Serial Data" },
- { } /* end of list */
-};
-
-static struct usb_gadget_strings gs_string_table = {
- .language = 0x0409, /* en-us */
- .strings = gs_strings,
+static struct usb_gadget_strings *dev_strings[] = {
+ &stringtab_dev,
+ NULL,
};
-static struct usb_device_descriptor gs_device_desc = {
+static struct usb_device_descriptor device_desc = {
.bLength = USB_DT_DEVICE_SIZE,
.bDescriptorType = USB_DT_DEVICE,
.bcdUSB = __constant_cpu_to_le16(0x0200),
+ /* .bDeviceClass = f(use_acm) */
.bDeviceSubClass = 0,
.bDeviceProtocol = 0,
+ /* .bMaxPacketSize0 = f(hardware) */
.idVendor = __constant_cpu_to_le16(GS_VENDOR_ID),
- .idProduct = __constant_cpu_to_le16(GS_PRODUCT_ID),
- .iManufacturer = GS_MANUFACTURER_STR_ID,
- .iProduct = GS_PRODUCT_STR_ID,
- .bNumConfigurations = GS_NUM_CONFIGS,
+ /* .idProduct = f(use_acm) */
+ /* .bcdDevice = f(hardware) */
+ /* .iManufacturer = DYNAMIC */
+ /* .iProduct = DYNAMIC */
+ .bNumConfigurations = 1,
};
-static struct usb_otg_descriptor gs_otg_descriptor = {
- .bLength = sizeof(gs_otg_descriptor),
+static struct usb_otg_descriptor otg_descriptor = {
+ .bLength = sizeof otg_descriptor,
.bDescriptorType = USB_DT_OTG,
- .bmAttributes = USB_OTG_SRP,
-};
-
-static struct usb_config_descriptor gs_bulk_config_desc = {
- .bLength = USB_DT_CONFIG_SIZE,
- .bDescriptorType = USB_DT_CONFIG,
- /* .wTotalLength computed dynamically */
- .bNumInterfaces = 1,
- .bConfigurationValue = GS_BULK_CONFIG_ID,
- .iConfiguration = GS_BULK_CONFIG_STR_ID,
- .bmAttributes = USB_CONFIG_ATT_ONE | USB_CONFIG_ATT_SELFPOWER,
- .bMaxPower = 1,
-};
-
-static struct usb_config_descriptor gs_acm_config_desc = {
- .bLength = USB_DT_CONFIG_SIZE,
- .bDescriptorType = USB_DT_CONFIG,
- /* .wTotalLength computed dynamically */
- .bNumInterfaces = 2,
- .bConfigurationValue = GS_ACM_CONFIG_ID,
- .iConfiguration = GS_ACM_CONFIG_STR_ID,
- .bmAttributes = USB_CONFIG_ATT_ONE | USB_CONFIG_ATT_SELFPOWER,
- .bMaxPower = 1,
-};
-
-static const struct usb_interface_descriptor gs_bulk_interface_desc = {
- .bLength = USB_DT_INTERFACE_SIZE,
- .bDescriptorType = USB_DT_INTERFACE,
- .bInterfaceNumber = GS_BULK_INTERFACE_ID,
- .bNumEndpoints = 2,
- .bInterfaceClass = USB_CLASS_VENDOR_SPEC,
- .bInterfaceSubClass = 0,
- .bInterfaceProtocol = 0,
- .iInterface = GS_DATA_STR_ID,
-};
-
-static const struct usb_interface_descriptor gs_control_interface_desc = {
- .bLength = USB_DT_INTERFACE_SIZE,
- .bDescriptorType = USB_DT_INTERFACE,
- .bInterfaceNumber = GS_CONTROL_INTERFACE_ID,
- .bNumEndpoints = 1,
- .bInterfaceClass = USB_CLASS_COMM,
- .bInterfaceSubClass = USB_CDC_SUBCLASS_ACM,
- .bInterfaceProtocol = USB_CDC_ACM_PROTO_AT_V25TER,
- .iInterface = GS_CONTROL_STR_ID,
-};
-
-static const struct usb_interface_descriptor gs_data_interface_desc = {
- .bLength = USB_DT_INTERFACE_SIZE,
- .bDescriptorType = USB_DT_INTERFACE,
- .bInterfaceNumber = GS_DATA_INTERFACE_ID,
- .bNumEndpoints = 2,
- .bInterfaceClass = USB_CLASS_CDC_DATA,
- .bInterfaceSubClass = 0,
- .bInterfaceProtocol = 0,
- .iInterface = GS_DATA_STR_ID,
-};
-
-static const struct usb_cdc_header_desc gs_header_desc = {
- .bLength = sizeof(gs_header_desc),
- .bDescriptorType = USB_DT_CS_INTERFACE,
- .bDescriptorSubType = USB_CDC_HEADER_TYPE,
- .bcdCDC = __constant_cpu_to_le16(0x0110),
-};
-
-static const struct usb_cdc_call_mgmt_descriptor gs_call_mgmt_descriptor = {
- .bLength = sizeof(gs_call_mgmt_descriptor),
- .bDescriptorType = USB_DT_CS_INTERFACE,
- .bDescriptorSubType = USB_CDC_CALL_MANAGEMENT_TYPE,
- .bmCapabilities = 0,
- .bDataInterface = 1, /* index of data interface */
-};
-
-static struct usb_cdc_acm_descriptor gs_acm_descriptor = {
- .bLength = sizeof(gs_acm_descriptor),
- .bDescriptorType = USB_DT_CS_INTERFACE,
- .bDescriptorSubType = USB_CDC_ACM_TYPE,
- .bmCapabilities = (1 << 1),
-};
-
-static const struct usb_cdc_union_desc gs_union_desc = {
- .bLength = sizeof(gs_union_desc),
- .bDescriptorType = USB_DT_CS_INTERFACE,
- .bDescriptorSubType = USB_CDC_UNION_TYPE,
- .bMasterInterface0 = 0, /* index of control interface */
- .bSlaveInterface0 = 1, /* index of data interface */
-};
-
-static struct usb_endpoint_descriptor gs_fullspeed_notify_desc = {
- .bLength = USB_DT_ENDPOINT_SIZE,
- .bDescriptorType = USB_DT_ENDPOINT,
- .bEndpointAddress = USB_DIR_IN,
- .bmAttributes = USB_ENDPOINT_XFER_INT,
- .wMaxPacketSize = __constant_cpu_to_le16(GS_NOTIFY_MAXPACKET),
- .bInterval = 1 << GS_LOG2_NOTIFY_INTERVAL,
-};
-
-static struct usb_endpoint_descriptor gs_fullspeed_in_desc = {
- .bLength = USB_DT_ENDPOINT_SIZE,
- .bDescriptorType = USB_DT_ENDPOINT,
- .bEndpointAddress = USB_DIR_IN,
- .bmAttributes = USB_ENDPOINT_XFER_BULK,
-};
-
-static struct usb_endpoint_descriptor gs_fullspeed_out_desc = {
- .bLength = USB_DT_ENDPOINT_SIZE,
- .bDescriptorType = USB_DT_ENDPOINT,
- .bEndpointAddress = USB_DIR_OUT,
- .bmAttributes = USB_ENDPOINT_XFER_BULK,
-};
-
-static const struct usb_descriptor_header *gs_bulk_fullspeed_function[] = {
- (struct usb_descriptor_header *) &gs_otg_descriptor,
- (struct usb_descriptor_header *) &gs_bulk_interface_desc,
- (struct usb_descriptor_header *) &gs_fullspeed_in_desc,
- (struct usb_descriptor_header *) &gs_fullspeed_out_desc,
- NULL,
-};
-
-static const struct usb_descriptor_header *gs_acm_fullspeed_function[] = {
- (struct usb_descriptor_header *) &gs_otg_descriptor,
- (struct usb_descriptor_header *) &gs_control_interface_desc,
- (struct usb_descriptor_header *) &gs_header_desc,
- (struct usb_descriptor_header *) &gs_call_mgmt_descriptor,
- (struct usb_descriptor_header *) &gs_acm_descriptor,
- (struct usb_descriptor_header *) &gs_union_desc,
- (struct usb_descriptor_header *) &gs_fullspeed_notify_desc,
- (struct usb_descriptor_header *) &gs_data_interface_desc,
- (struct usb_descriptor_header *) &gs_fullspeed_in_desc,
- (struct usb_descriptor_header *) &gs_fullspeed_out_desc,
- NULL,
-};
-static struct usb_endpoint_descriptor gs_highspeed_notify_desc = {
- .bLength = USB_DT_ENDPOINT_SIZE,
- .bDescriptorType = USB_DT_ENDPOINT,
- .bEndpointAddress = USB_DIR_IN,
- .bmAttributes = USB_ENDPOINT_XFER_INT,
- .wMaxPacketSize = __constant_cpu_to_le16(GS_NOTIFY_MAXPACKET),
- .bInterval = GS_LOG2_NOTIFY_INTERVAL+4,
-};
-
-static struct usb_endpoint_descriptor gs_highspeed_in_desc = {
- .bLength = USB_DT_ENDPOINT_SIZE,
- .bDescriptorType = USB_DT_ENDPOINT,
- .bmAttributes = USB_ENDPOINT_XFER_BULK,
- .wMaxPacketSize = __constant_cpu_to_le16(512),
-};
-
-static struct usb_endpoint_descriptor gs_highspeed_out_desc = {
- .bLength = USB_DT_ENDPOINT_SIZE,
- .bDescriptorType = USB_DT_ENDPOINT,
- .bmAttributes = USB_ENDPOINT_XFER_BULK,
- .wMaxPacketSize = __constant_cpu_to_le16(512),
-};
-
-static struct usb_qualifier_descriptor gs_qualifier_desc = {
- .bLength = sizeof(struct usb_qualifier_descriptor),
- .bDescriptorType = USB_DT_DEVICE_QUALIFIER,
- .bcdUSB = __constant_cpu_to_le16 (0x0200),
- /* assumes ep0 uses the same value for both speeds ... */
- .bNumConfigurations = GS_NUM_CONFIGS,
-};
-
-static const struct usb_descriptor_header *gs_bulk_highspeed_function[] = {
- (struct usb_descriptor_header *) &gs_otg_descriptor,
- (struct usb_descriptor_header *) &gs_bulk_interface_desc,
- (struct usb_descriptor_header *) &gs_highspeed_in_desc,
- (struct usb_descriptor_header *) &gs_highspeed_out_desc,
- NULL,
+ /* REVISIT SRP-only hardware is possible, although
+ * it would not be called "OTG" ...
+ */
+ .bmAttributes = USB_OTG_SRP | USB_OTG_HNP,
};
-static const struct usb_descriptor_header *gs_acm_highspeed_function[] = {
- (struct usb_descriptor_header *) &gs_otg_descriptor,
- (struct usb_descriptor_header *) &gs_control_interface_desc,
- (struct usb_descriptor_header *) &gs_header_desc,
- (struct usb_descriptor_header *) &gs_call_mgmt_descriptor,
- (struct usb_descriptor_header *) &gs_acm_descriptor,
- (struct usb_descriptor_header *) &gs_union_desc,
- (struct usb_descriptor_header *) &gs_highspeed_notify_desc,
- (struct usb_descriptor_header *) &gs_data_interface_desc,
- (struct usb_descriptor_header *) &gs_highspeed_in_desc,
- (struct usb_descriptor_header *) &gs_highspeed_out_desc,
+static const struct usb_descriptor_header *otg_desc[] = {
+ (struct usb_descriptor_header *) &otg_descriptor,
NULL,
};
-
/*-------------------------------------------------------------------------*/
/* Module */
-MODULE_DESCRIPTION(GS_LONG_NAME);
+MODULE_DESCRIPTION(GS_VERSION_NAME);
MODULE_AUTHOR("Al Borchers");
+MODULE_AUTHOR("David Brownell");
MODULE_LICENSE("GPL");
-#ifdef DEBUG
-module_param(debug, int, S_IRUGO|S_IWUSR);
-MODULE_PARM_DESC(debug, "Enable debugging, 0=off, 1=on");
-#endif
-
-static unsigned int read_q_size = GS_DEFAULT_READ_Q_SIZE;
-module_param(read_q_size, uint, S_IRUGO);
-MODULE_PARM_DESC(read_q_size, "Read request queue size, default=32");
-
-static unsigned int write_q_size = GS_DEFAULT_WRITE_Q_SIZE;
-module_param(write_q_size, uint, S_IRUGO);
-MODULE_PARM_DESC(write_q_size, "Write request queue size, default=32");
+static int use_acm = true;
+module_param(use_acm, bool, 0);
+MODULE_PARM_DESC(use_acm, "Use CDC ACM, default=yes");
-static unsigned int write_buf_size = GS_DEFAULT_WRITE_BUF_SIZE;
-module_param(write_buf_size, uint, S_IRUGO);
-MODULE_PARM_DESC(write_buf_size, "Write buffer size, default=8192");
-
-static unsigned int use_acm = GS_DEFAULT_USE_ACM;
-module_param(use_acm, uint, S_IRUGO);
-MODULE_PARM_DESC(use_acm, "Use CDC ACM, 0=no, 1=yes, default=no");
+static unsigned n_ports = 1;
+module_param(n_ports, uint, 0);
+MODULE_PARM_DESC(n_ports, "number of ports to create, default=1");
/*-------------------------------------------------------------------------*/
-/* TTY Driver */
-
-/*
- * gs_open
- */
-static int gs_open(struct tty_struct *tty, struct file *file)
-{
- int port_num;
- unsigned long flags;
- struct gs_port *port;
- struct gs_dev *dev;
- struct gs_buf *buf;
- struct mutex *mtx;
- int ret;
-
- port_num = tty->index;
-
- gs_debug("gs_open: (%d,%p,%p)\n", port_num, tty, file);
-
- if (port_num < 0 || port_num >= GS_NUM_PORTS) {
- pr_err("gs_open: (%d,%p,%p) invalid port number\n",
- port_num, tty, file);
- return -ENODEV;
- }
-
- dev = gs_device;
-
- if (dev == NULL) {
- pr_err("gs_open: (%d,%p,%p) NULL device pointer\n",
- port_num, tty, file);
- return -ENODEV;
- }
-
- mtx = &gs_open_close_lock[port_num];
- if (mutex_lock_interruptible(mtx)) {
- pr_err("gs_open: (%d,%p,%p) interrupted waiting for mutex\n",
- port_num, tty, file);
- return -ERESTARTSYS;
- }
-
- spin_lock_irqsave(&dev->dev_lock, flags);
-
- if (dev->dev_config == GS_NO_CONFIG_ID) {
- pr_err("gs_open: (%d,%p,%p) device is not connected\n",
- port_num, tty, file);
- ret = -ENODEV;
- goto exit_unlock_dev;
- }
-
- port = dev->dev_port[port_num];
-
- if (port == NULL) {
- pr_err("gs_open: (%d,%p,%p) NULL port pointer\n",
- port_num, tty, file);
- ret = -ENODEV;
- goto exit_unlock_dev;
- }
-
- spin_lock(&port->port_lock);
- spin_unlock(&dev->dev_lock);
-
- if (port->port_dev == NULL) {
- pr_err("gs_open: (%d,%p,%p) port disconnected (1)\n",
- port_num, tty, file);
- ret = -EIO;
- goto exit_unlock_port;
- }
-
- if (port->port_open_count > 0) {
- ++port->port_open_count;
- gs_debug("gs_open: (%d,%p,%p) already open\n",
- port_num, tty, file);
- ret = 0;
- goto exit_unlock_port;
- }
-
- tty->driver_data = NULL;
-
- /* mark port as in use, we can drop port lock and sleep if necessary */
- port->port_in_use = 1;
-
- /* allocate write buffer on first open */
- if (port->port_write_buf == NULL) {
- spin_unlock_irqrestore(&port->port_lock, flags);
- buf = gs_buf_alloc(write_buf_size, GFP_KERNEL);
- spin_lock_irqsave(&port->port_lock, flags);
-
- /* might have been disconnected while asleep, check */
- if (port->port_dev == NULL) {
- pr_err("gs_open: (%d,%p,%p) port disconnected (2)\n",
- port_num, tty, file);
- port->port_in_use = 0;
- ret = -EIO;
- goto exit_unlock_port;
- }
-
- if ((port->port_write_buf=buf) == NULL) {
- pr_err("gs_open: (%d,%p,%p) cannot allocate "
- "port write buffer\n",
- port_num, tty, file);
- port->port_in_use = 0;
- ret = -ENOMEM;
- goto exit_unlock_port;
- }
-
- }
-
- /* wait for carrier detect (not implemented) */
-
- /* might have been disconnected while asleep, check */
- if (port->port_dev == NULL) {
- pr_err("gs_open: (%d,%p,%p) port disconnected (3)\n",
- port_num, tty, file);
- port->port_in_use = 0;
- ret = -EIO;
- goto exit_unlock_port;
- }
-
- tty->driver_data = port;
- port->port_tty = tty;
- port->port_open_count = 1;
- port->port_in_use = 0;
-
- gs_debug("gs_open: (%d,%p,%p) completed\n", port_num, tty, file);
-
- ret = 0;
-
-exit_unlock_port:
- spin_unlock_irqrestore(&port->port_lock, flags);
- mutex_unlock(mtx);
- return ret;
-
-exit_unlock_dev:
- spin_unlock_irqrestore(&dev->dev_lock, flags);
- mutex_unlock(mtx);
- return ret;
-
-}
-
-/*
- * gs_close
- */
-
-static int gs_write_finished_event_safely(struct gs_port *p)
-{
- int cond;
-
- spin_lock_irq(&(p)->port_lock);
- cond = !(p)->port_dev || !gs_buf_data_avail((p)->port_write_buf);
- spin_unlock_irq(&(p)->port_lock);
- return cond;
-}
-
-static void gs_close(struct tty_struct *tty, struct file *file)
-{
- struct gs_port *port = tty->driver_data;
- struct mutex *mtx;
-
- if (port == NULL) {
- pr_err("gs_close: NULL port pointer\n");
- return;
- }
-
- gs_debug("gs_close: (%d,%p,%p)\n", port->port_num, tty, file);
-
- mtx = &gs_open_close_lock[port->port_num];
- mutex_lock(mtx);
-
- spin_lock_irq(&port->port_lock);
-
- if (port->port_open_count == 0) {
- pr_err("gs_close: (%d,%p,%p) port is already closed\n",
- port->port_num, tty, file);
- goto exit;
- }
-
- if (port->port_open_count > 1) {
- --port->port_open_count;
- goto exit;
- }
-
- /* free disconnected port on final close */
- if (port->port_dev == NULL) {
- kfree(port);
- goto exit;
- }
-
- /* mark port as closed but in use, we can drop port lock */
- /* and sleep if necessary */
- port->port_in_use = 1;
- port->port_open_count = 0;
-
- /* wait for write buffer to drain, or */
- /* at most GS_CLOSE_TIMEOUT seconds */
- if (gs_buf_data_avail(port->port_write_buf) > 0) {
- spin_unlock_irq(&port->port_lock);
- wait_event_interruptible_timeout(port->port_write_wait,
- gs_write_finished_event_safely(port),
- GS_CLOSE_TIMEOUT * HZ);
- spin_lock_irq(&port->port_lock);
- }
-
- /* free disconnected port on final close */
- /* (might have happened during the above sleep) */
- if (port->port_dev == NULL) {
- kfree(port);
- goto exit;
- }
-
- gs_buf_clear(port->port_write_buf);
-
- tty->driver_data = NULL;
- port->port_tty = NULL;
- port->port_in_use = 0;
-
- gs_debug("gs_close: (%d,%p,%p) completed\n",
- port->port_num, tty, file);
-
-exit:
- spin_unlock_irq(&port->port_lock);
- mutex_unlock(mtx);
-}
-
-/*
- * gs_write
- */
-static int gs_write(struct tty_struct *tty, const unsigned char *buf, int count)
+static int __init serial_bind_config(struct usb_configuration *c)
{
- unsigned long flags;
- struct gs_port *port = tty->driver_data;
- int ret;
-
- if (port == NULL) {
- pr_err("gs_write: NULL port pointer\n");
- return -EIO;
- }
-
- gs_debug("gs_write: (%d,%p) writing %d bytes\n", port->port_num, tty,
- count);
-
- if (count == 0)
- return 0;
-
- spin_lock_irqsave(&port->port_lock, flags);
-
- if (port->port_dev == NULL) {
- pr_err("gs_write: (%d,%p) port is not connected\n",
- port->port_num, tty);
- ret = -EIO;
- goto exit;
- }
-
- if (port->port_open_count == 0) {
- pr_err("gs_write: (%d,%p) port is closed\n",
- port->port_num, tty);
- ret = -EBADF;
- goto exit;
- }
-
- count = gs_buf_put(port->port_write_buf, buf, count);
-
- spin_unlock_irqrestore(&port->port_lock, flags);
-
- gs_send(gs_device);
-
- gs_debug("gs_write: (%d,%p) wrote %d bytes\n", port->port_num, tty,
- count);
+ unsigned i;
+ int status = 0;
- return count;
-
-exit:
- spin_unlock_irqrestore(&port->port_lock, flags);
- return ret;
-}
-
-/*
- * gs_put_char
- */
-static int gs_put_char(struct tty_struct *tty, unsigned char ch)
-{
- unsigned long flags;
- struct gs_port *port = tty->driver_data;
- int ret = 0;
-
- if (port == NULL) {
- pr_err("gs_put_char: NULL port pointer\n");
- return 0;
- }
-
- gs_debug("gs_put_char: (%d,%p) char=0x%x, called from %p\n",
- port->port_num, tty, ch, __builtin_return_address(0));
-
- spin_lock_irqsave(&port->port_lock, flags);
-
- if (port->port_dev == NULL) {
- pr_err("gs_put_char: (%d,%p) port is not connected\n",
- port->port_num, tty);
- goto exit;
- }
-
- if (port->port_open_count == 0) {
- pr_err("gs_put_char: (%d,%p) port is closed\n",
- port->port_num, tty);
- goto exit;
- }
-
- ret = gs_buf_put(port->port_write_buf, &ch, 1);
-
-exit:
- spin_unlock_irqrestore(&port->port_lock, flags);
- return ret;
-}
-
-/*
- * gs_flush_chars
- */
-static void gs_flush_chars(struct tty_struct *tty)
-{
- unsigned long flags;
- struct gs_port *port = tty->driver_data;
-
- if (port == NULL) {
- pr_err("gs_flush_chars: NULL port pointer\n");
- return;
- }
-
- gs_debug("gs_flush_chars: (%d,%p)\n", port->port_num, tty);
-
- spin_lock_irqsave(&port->port_lock, flags);
-
- if (port->port_dev == NULL) {
- pr_err("gs_flush_chars: (%d,%p) port is not connected\n",
- port->port_num, tty);
- goto exit;
- }
-
- if (port->port_open_count == 0) {
- pr_err("gs_flush_chars: (%d,%p) port is closed\n",
- port->port_num, tty);
- goto exit;
- }
-
- spin_unlock_irqrestore(&port->port_lock, flags);
-
- gs_send(gs_device);
-
- return;
-
-exit:
- spin_unlock_irqrestore(&port->port_lock, flags);
-}
-
-/*
- * gs_write_room
- */
-static int gs_write_room(struct tty_struct *tty)
-{
-
- int room = 0;
- unsigned long flags;
- struct gs_port *port = tty->driver_data;
-
-
- if (port == NULL)
- return 0;
-
- spin_lock_irqsave(&port->port_lock, flags);
-
- if (port->port_dev != NULL && port->port_open_count > 0
- && port->port_write_buf != NULL)
- room = gs_buf_space_avail(port->port_write_buf);
-
- spin_unlock_irqrestore(&port->port_lock, flags);
-
- gs_debug("gs_write_room: (%d,%p) room=%d\n",
- port->port_num, tty, room);
-
- return room;
-}
-
-/*
- * gs_chars_in_buffer
- */
-static int gs_chars_in_buffer(struct tty_struct *tty)
-{
- int chars = 0;
- unsigned long flags;
- struct gs_port *port = tty->driver_data;
-
- if (port == NULL)
- return 0;
-
- spin_lock_irqsave(&port->port_lock, flags);
-
- if (port->port_dev != NULL && port->port_open_count > 0
- && port->port_write_buf != NULL)
- chars = gs_buf_data_avail(port->port_write_buf);
-
- spin_unlock_irqrestore(&port->port_lock, flags);
-
- gs_debug("gs_chars_in_buffer: (%d,%p) chars=%d\n",
- port->port_num, tty, chars);
-
- return chars;
-}
-
-/*
- * gs_throttle
- */
-static void gs_throttle(struct tty_struct *tty)
-{
-}
-
-/*
- * gs_unthrottle
- */
-static void gs_unthrottle(struct tty_struct *tty)
-{
-}
-
-/*
- * gs_break
- */
-static void gs_break(struct tty_struct *tty, int break_state)
-{
-}
-
-/*
- * gs_ioctl
- */
-static int gs_ioctl(struct tty_struct *tty, struct file *file, unsigned int cmd, unsigned long arg)
-{
- struct gs_port *port = tty->driver_data;
-
- if (port == NULL) {
- pr_err("gs_ioctl: NULL port pointer\n");
- return -EIO;
+ for (i = 0; i < n_ports && status == 0; i++) {
+ if (use_acm)
+ status = acm_bind_config(c, i);
+ else
+ status = gser_bind_config(c, i);
}
-
- gs_debug("gs_ioctl: (%d,%p,%p) cmd=0x%4.4x, arg=%lu\n",
- port->port_num, tty, file, cmd, arg);
-
- /* handle ioctls */
-
- /* could not handle ioctl */
- return -ENOIOCTLCMD;
-}
-
-/*
- * gs_set_termios
- */
-static void gs_set_termios(struct tty_struct *tty, struct ktermios *old)
-{
+ return status;
}
-static const struct tty_operations gs_tty_ops = {
- .open = gs_open,
- .close = gs_close,
- .write = gs_write,
- .put_char = gs_put_char,
- .flush_chars = gs_flush_chars,
- .write_room = gs_write_room,
- .ioctl = gs_ioctl,
- .set_termios = gs_set_termios,
- .throttle = gs_throttle,
- .unthrottle = gs_unthrottle,
- .break_ctl = gs_break,
- .chars_in_buffer = gs_chars_in_buffer,
+static struct usb_configuration serial_config_driver = {
+ /* .label = f(use_acm) */
+ .bind = serial_bind_config,
+ /* .bConfigurationValue = f(use_acm) */
+ /* .iConfiguration = DYNAMIC */
+ .bmAttributes = USB_CONFIG_ATT_SELFPOWER,
+ .bMaxPower = 1, /* 2 mA, minimal */
};
-/*-------------------------------------------------------------------------*/
-
-/*
-* gs_send
-*
-* This function finds available write requests, calls
-* gs_send_packet to fill these packets with data, and
-* continues until either there are no more write requests
-* available or no more data to send. This function is
-* run whenever data arrives or write requests are available.
-*/
-static int gs_send(struct gs_dev *dev)
-{
- int ret,len;
- unsigned long flags;
- struct usb_ep *ep;
- struct usb_request *req;
-
- if (dev == NULL) {
- pr_err("gs_send: NULL device pointer\n");
- return -ENODEV;
- }
-
- spin_lock_irqsave(&dev->dev_lock, flags);
-
- ep = dev->dev_in_ep;
-
- while(!list_empty(&dev->dev_req_list)) {
-
- req = list_entry(dev->dev_req_list.next,
- struct usb_request, list);
-
- len = gs_send_packet(dev, req->buf, ep->maxpacket);
-
- if (len > 0) {
- gs_debug_level(3, "gs_send: len=%d, 0x%2.2x "
- "0x%2.2x 0x%2.2x ...\n", len,
- *((unsigned char *)req->buf),
- *((unsigned char *)req->buf+1),
- *((unsigned char *)req->buf+2));
- list_del(&req->list);
- req->length = len;
- spin_unlock_irqrestore(&dev->dev_lock, flags);
- if ((ret=usb_ep_queue(ep, req, GFP_ATOMIC))) {
- pr_err(
- "gs_send: cannot queue read request, ret=%d\n",
- ret);
- spin_lock_irqsave(&dev->dev_lock, flags);
- break;
- }
- spin_lock_irqsave(&dev->dev_lock, flags);
- } else {
- break;
- }
-
- }
-
- spin_unlock_irqrestore(&dev->dev_lock, flags);
-
- return 0;
-}
-
-/*
- * gs_send_packet
- *
- * If there is data to send, a packet is built in the given
- * buffer and the size is returned. If there is no data to
- * send, 0 is returned. If there is any error a negative
- * error number is returned.
- *
- * Called during USB completion routine, on interrupt time.
- *
- * We assume that disconnect will not happen until all completion
- * routines have completed, so we can assume that the dev_port
- * array does not change during the lifetime of this function.
- */
-static int gs_send_packet(struct gs_dev *dev, char *packet, unsigned int size)
-{
- unsigned int len;
- struct gs_port *port;
-
- /* TEMPORARY -- only port 0 is supported right now */
- port = dev->dev_port[0];
-
- if (port == NULL) {
- pr_err("gs_send_packet: port=%d, NULL port pointer\n", 0);
- return -EIO;
- }
-
- spin_lock(&port->port_lock);
-
- len = gs_buf_data_avail(port->port_write_buf);
- if (len < size)
- size = len;
-
- if (size == 0)
- goto exit;
-
- size = gs_buf_get(port->port_write_buf, packet, size);
-
- if (port->port_tty)
- wake_up_interruptible(&port->port_tty->write_wait);
-
-exit:
- spin_unlock(&port->port_lock);
- return size;
-}
-
-/*
- * gs_recv_packet
- *
- * Called for each USB packet received. Reads the packet
- * header and stuffs the data in the appropriate tty buffer.
- * Returns 0 if successful, or a negative error number.
- *
- * Called during USB completion routine, on interrupt time.
- *
- * We assume that disconnect will not happen until all completion
- * routines have completed, so we can assume that the dev_port
- * array does not change during the lifetime of this function.
- */
-static int gs_recv_packet(struct gs_dev *dev, char *packet, unsigned int size)
-{
- unsigned int len;
- struct gs_port *port;
- int ret;
- struct tty_struct *tty;
-
- /* TEMPORARY -- only port 0 is supported right now */
- port = dev->dev_port[0];
-
- if (port == NULL) {
- pr_err("gs_recv_packet: port=%d, NULL port pointer\n",
- port->port_num);
- return -EIO;
- }
-
- spin_lock(&port->port_lock);
-
- if (port->port_open_count == 0) {
- pr_err("gs_recv_packet: port=%d, port is closed\n",
- port->port_num);
- ret = -EIO;
- goto exit;
- }
-
-
- tty = port->port_tty;
-
- if (tty == NULL) {
- pr_err("gs_recv_packet: port=%d, NULL tty pointer\n",
- port->port_num);
- ret = -EIO;
- goto exit;
- }
-
- if (port->port_tty->magic != TTY_MAGIC) {
- pr_err("gs_recv_packet: port=%d, bad tty magic\n",
- port->port_num);
- ret = -EIO;
- goto exit;
- }
-
- len = tty_buffer_request_room(tty, size);
- if (len > 0) {
- tty_insert_flip_string(tty, packet, len);
- tty_flip_buffer_push(port->port_tty);
- wake_up_interruptible(&port->port_tty->read_wait);
- }
- ret = 0;
-exit:
- spin_unlock(&port->port_lock);
- return ret;
-}
-
-/*
-* gs_read_complete
-*/
-static void gs_read_complete(struct usb_ep *ep, struct usb_request *req)
+static int __init gs_bind(struct usb_composite_dev *cdev)
{
- int ret;
- struct gs_dev *dev = ep->driver_data;
-
- if (dev == NULL) {
- pr_err("gs_read_complete: NULL device pointer\n");
- return;
- }
+ int gcnum;
+ struct usb_gadget *gadget = cdev->gadget;
+ int status;
- switch(req->status) {
- case 0:
- /* normal completion */
- gs_recv_packet(dev, req->buf, req->actual);
-requeue:
- req->length = ep->maxpacket;
- if ((ret=usb_ep_queue(ep, req, GFP_ATOMIC))) {
- pr_err(
- "gs_read_complete: cannot queue read request, ret=%d\n",
- ret);
- }
- break;
-
- case -ESHUTDOWN:
- /* disconnect */
- gs_debug("gs_read_complete: shutdown\n");
- gs_free_req(ep, req);
- break;
-
- default:
- /* unexpected */
- pr_err(
- "gs_read_complete: unexpected status error, status=%d\n",
- req->status);
- goto requeue;
- break;
- }
-}
-
-/*
-* gs_write_complete
-*/
-static void gs_write_complete(struct usb_ep *ep, struct usb_request *req)
-{
- struct gs_dev *dev = ep->driver_data;
-
- if (dev == NULL) {
- pr_err("gs_write_complete: NULL device pointer\n");
- return;
- }
+ status = gserial_setup(cdev->gadget, n_ports);
+ if (status < 0)
+ return status;
- switch(req->status) {
- case 0:
- /* normal completion */
-requeue:
- spin_lock(&dev->dev_lock);
- list_add(&req->list, &dev->dev_req_list);
- spin_unlock(&dev->dev_lock);
-
- gs_send(dev);
-
- break;
-
- case -ESHUTDOWN:
- /* disconnect */
- gs_debug("gs_write_complete: shutdown\n");
- gs_free_req(ep, req);
- break;
-
- default:
- pr_err(
- "gs_write_complete: unexpected status error, status=%d\n",
- req->status);
- goto requeue;
- break;
- }
-}
+ /* Allocate string descriptor numbers ... note that string
+ * contents can be overridden by the composite_dev glue.
+ */
-/*-------------------------------------------------------------------------*/
+ /* device description: manufacturer, product */
+ snprintf(manufacturer, sizeof manufacturer, "%s %s with %s",
+ init_utsname()->sysname, init_utsname()->release,
+ gadget->name);
+ status = usb_string_id(cdev);
+ if (status < 0)
+ goto fail;
+ strings_dev[STRING_MANUFACTURER_IDX].id = status;
-/* Gadget Driver */
+ device_desc.iManufacturer = status;
-/*
- * gs_unbind
- *
- * Called on module unload. Frees the control request and device
- * structure.
- */
-static void /* __init_or_exit */ gs_unbind(struct usb_gadget *gadget)
-{
- struct gs_dev *dev = get_gadget_data(gadget);
+ status = usb_string_id(cdev);
+ if (status < 0)
+ goto fail;
+ strings_dev[STRING_PRODUCT_IDX].id = status;
- gs_device = NULL;
+ device_desc.iProduct = status;
- /* read/write requests already freed, only control request remains */
- if (dev != NULL) {
- if (dev->dev_ctrl_req != NULL) {
- gs_free_req(gadget->ep0, dev->dev_ctrl_req);
- dev->dev_ctrl_req = NULL;
- }
- gs_reset_config(dev);
- gs_free_ports(dev);
- kfree(dev);
- set_gadget_data(gadget, NULL);
- }
+ /* config description */
+ status = usb_string_id(cdev);
+ if (status < 0)
+ goto fail;
+ strings_dev[STRING_DESCRIPTION_IDX].id = status;
- pr_info("gs_unbind: %s %s unbound\n", GS_LONG_NAME,
- GS_VERSION_STR);
-}
-
-/*
- * gs_bind
- *
- * Called on module load. Allocates and initializes the device
- * structure and a control request.
- */
-static int __init gs_bind(struct usb_gadget *gadget)
-{
- int ret;
- struct usb_ep *ep;
- struct gs_dev *dev;
- int gcnum;
-
- /* Some controllers can't support CDC ACM:
- * - sh doesn't support multiple interfaces or configs;
- * - sa1100 doesn't have a third interrupt endpoint
- */
- if (gadget_is_sh(gadget) || gadget_is_sa1100(gadget))
- use_acm = 0;
+ serial_config_driver.iConfiguration = status;
+ /* set up other descriptors */
gcnum = usb_gadget_controller_number(gadget);
if (gcnum >= 0)
- gs_device_desc.bcdDevice =
- cpu_to_le16(GS_VERSION_NUM | gcnum);
+ device_desc.bcdDevice = cpu_to_le16(GS_VERSION_NUM | gcnum);
else {
+ /* this is so simple (for now, no altsettings) that it
+ * SHOULD NOT have problems with bulk-capable hardware.
+ * so warn about unrcognized controllers -- don't panic.
+ *
+ * things like configuration and altsetting numbering
+ * can need hardware-specific attention though.
+ */
pr_warning("gs_bind: controller '%s' not recognized\n",
gadget->name);
- /* unrecognized, but safe unless bulk is REALLY quirky */
- gs_device_desc.bcdDevice =
- __constant_cpu_to_le16(GS_VERSION_NUM|0x0099);
- }
-
- dev = kzalloc(sizeof(struct gs_dev), GFP_KERNEL);
- if (dev == NULL)
- return -ENOMEM;
-
- usb_ep_autoconfig_reset(gadget);
-
- ep = usb_ep_autoconfig(gadget, &gs_fullspeed_in_desc);
- if (!ep)
- goto autoconf_fail;
- dev->dev_in_ep = ep;
- ep->driver_data = dev; /* claim the endpoint */
-
- ep = usb_ep_autoconfig(gadget, &gs_fullspeed_out_desc);
- if (!ep)
- goto autoconf_fail;
- dev->dev_out_ep = ep;
- ep->driver_data = dev; /* claim the endpoint */
-
- if (use_acm) {
- ep = usb_ep_autoconfig(gadget, &gs_fullspeed_notify_desc);
- if (!ep) {
- pr_err("gs_bind: cannot run ACM on %s\n", gadget->name);
- goto autoconf_fail;
- }
- gs_device_desc.idProduct = __constant_cpu_to_le16(
- GS_CDC_PRODUCT_ID),
- dev->dev_notify_ep = ep;
- ep->driver_data = dev; /* claim the endpoint */
- }
-
- gs_device_desc.bDeviceClass = use_acm
- ? USB_CLASS_COMM : USB_CLASS_VENDOR_SPEC;
- gs_device_desc.bMaxPacketSize0 = gadget->ep0->maxpacket;
-
- if (gadget_is_dualspeed(gadget)) {
- gs_qualifier_desc.bDeviceClass = use_acm
- ? USB_CLASS_COMM : USB_CLASS_VENDOR_SPEC;
- /* assume ep0 uses the same packet size for both speeds */
- gs_qualifier_desc.bMaxPacketSize0 =
- gs_device_desc.bMaxPacketSize0;
- /* assume endpoints are dual-speed */
- gs_highspeed_notify_desc.bEndpointAddress =
- gs_fullspeed_notify_desc.bEndpointAddress;
- gs_highspeed_in_desc.bEndpointAddress =
- gs_fullspeed_in_desc.bEndpointAddress;
- gs_highspeed_out_desc.bEndpointAddress =
- gs_fullspeed_out_desc.bEndpointAddress;
- }
-
- usb_gadget_set_selfpowered(gadget);
-
- if (gadget_is_otg(gadget)) {
- gs_otg_descriptor.bmAttributes |= USB_OTG_HNP,
- gs_bulk_config_desc.bmAttributes |= USB_CONFIG_ATT_WAKEUP;
- gs_acm_config_desc.bmAttributes |= USB_CONFIG_ATT_WAKEUP;
+ device_desc.bcdDevice =
+ __constant_cpu_to_le16(GS_VERSION_NUM | 0x0099);
}
- gs_device = dev;
-
- snprintf(manufacturer, sizeof(manufacturer), "%s %s with %s",
- init_utsname()->sysname, init_utsname()->release,
- gadget->name);
-
- dev->dev_gadget = gadget;
- spin_lock_init(&dev->dev_lock);
- INIT_LIST_HEAD(&dev->dev_req_list);
- set_gadget_data(gadget, dev);
-
- if ((ret=gs_alloc_ports(dev, GFP_KERNEL)) != 0) {
- pr_err("gs_bind: cannot allocate ports\n");
- gs_unbind(gadget);
- return ret;
+ if (gadget_is_otg(cdev->gadget)) {
+ serial_config_driver.descriptors = otg_desc;
+ serial_config_driver.bmAttributes |= USB_CONFIG_ATT_WAKEUP;
}
- /* preallocate control response and buffer */
- dev->dev_ctrl_req = gs_alloc_req(gadget->ep0, GS_MAX_DESC_LEN,
- GFP_KERNEL);
- if (dev->dev_ctrl_req == NULL) {
- gs_unbind(gadget);
- return -ENOMEM;
- }
- gadget->ep0->driver_data = dev;
+ /* register our configuration */
+ status = usb_add_config(cdev, &serial_config_driver);
+ if (status < 0)
+ goto fail;
- pr_info("gs_bind: %s %s bound\n",
- GS_LONG_NAME, GS_VERSION_STR);
+ INFO(cdev, "%s\n", GS_VERSION_NAME);
return 0;
-autoconf_fail:
- kfree(dev);
- pr_err("gs_bind: cannot autoconfigure on %s\n", gadget->name);
- return -ENODEV;
-}
-
-static int gs_setup_standard(struct usb_gadget *gadget,
- const struct usb_ctrlrequest *ctrl)
-{
- int ret = -EOPNOTSUPP;
- struct gs_dev *dev = get_gadget_data(gadget);
- struct usb_request *req = dev->dev_ctrl_req;
- u16 wIndex = le16_to_cpu(ctrl->wIndex);
- u16 wValue = le16_to_cpu(ctrl->wValue);
- u16 wLength = le16_to_cpu(ctrl->wLength);
-
- switch (ctrl->bRequest) {
- case USB_REQ_GET_DESCRIPTOR:
- if (ctrl->bRequestType != USB_DIR_IN)
- break;
-
- switch (wValue >> 8) {
- case USB_DT_DEVICE:
- ret = min(wLength,
- (u16)sizeof(struct usb_device_descriptor));
- memcpy(req->buf, &gs_device_desc, ret);
- break;
-
- case USB_DT_DEVICE_QUALIFIER:
- if (!gadget_is_dualspeed(gadget))
- break;
- ret = min(wLength,
- (u16)sizeof(struct usb_qualifier_descriptor));
- memcpy(req->buf, &gs_qualifier_desc, ret);
- break;
-
- case USB_DT_OTHER_SPEED_CONFIG:
- if (!gadget_is_dualspeed(gadget))
- break;
- /* fall through */
- case USB_DT_CONFIG:
- ret = gs_build_config_buf(req->buf, gadget,
- wValue >> 8, wValue & 0xff,
- gadget_is_otg(gadget));
- if (ret >= 0)
- ret = min(wLength, (u16)ret);
- break;
-
- case USB_DT_STRING:
- /* wIndex == language code. */
- ret = usb_gadget_get_string(&gs_string_table,
- wValue & 0xff, req->buf);
- if (ret >= 0)
- ret = min(wLength, (u16)ret);
- break;
- }
- break;
-
- case USB_REQ_SET_CONFIGURATION:
- if (ctrl->bRequestType != 0)
- break;
- spin_lock(&dev->dev_lock);
- ret = gs_set_config(dev, wValue);
- spin_unlock(&dev->dev_lock);
- break;
-
- case USB_REQ_GET_CONFIGURATION:
- if (ctrl->bRequestType != USB_DIR_IN)
- break;
- *(u8 *)req->buf = dev->dev_config;
- ret = min(wLength, (u16)1);
- break;
-
- case USB_REQ_SET_INTERFACE:
- if (ctrl->bRequestType != USB_RECIP_INTERFACE
- || !dev->dev_config
- || wIndex >= GS_MAX_NUM_INTERFACES)
- break;
- if (dev->dev_config == GS_BULK_CONFIG_ID
- && wIndex != GS_BULK_INTERFACE_ID)
- break;
- /* no alternate interface settings */
- if (wValue != 0)
- break;
- spin_lock(&dev->dev_lock);
- /* PXA hardware partially handles SET_INTERFACE;
- * we need to kluge around that interference. */
- if (gadget_is_pxa(gadget)) {
- ret = gs_set_config(dev, use_acm ?
- GS_ACM_CONFIG_ID : GS_BULK_CONFIG_ID);
- goto set_interface_done;
- }
- if (dev->dev_config != GS_BULK_CONFIG_ID
- && wIndex == GS_CONTROL_INTERFACE_ID) {
- if (dev->dev_notify_ep) {
- usb_ep_disable(dev->dev_notify_ep);
- usb_ep_enable(dev->dev_notify_ep, dev->dev_notify_ep_desc);
- }
- } else {
- usb_ep_disable(dev->dev_in_ep);
- usb_ep_disable(dev->dev_out_ep);
- usb_ep_enable(dev->dev_in_ep, dev->dev_in_ep_desc);
- usb_ep_enable(dev->dev_out_ep, dev->dev_out_ep_desc);
- }
- ret = 0;
-set_interface_done:
- spin_unlock(&dev->dev_lock);
- break;
-
- case USB_REQ_GET_INTERFACE:
- if (ctrl->bRequestType != (USB_DIR_IN|USB_RECIP_INTERFACE)
- || dev->dev_config == GS_NO_CONFIG_ID)
- break;
- if (wIndex >= GS_MAX_NUM_INTERFACES
- || (dev->dev_config == GS_BULK_CONFIG_ID
- && wIndex != GS_BULK_INTERFACE_ID)) {
- ret = -EDOM;
- break;
- }
- /* no alternate interface settings */
- *(u8 *)req->buf = 0;
- ret = min(wLength, (u16)1);
- break;
-
- default:
- pr_err("gs_setup: unknown standard request, type=%02x, "
- "request=%02x, value=%04x, index=%04x, length=%d\n",
- ctrl->bRequestType, ctrl->bRequest,
- wValue, wIndex, wLength);
- break;
- }
-
- return ret;
+fail:
+ gserial_cleanup();
+ return status;
}
-static void gs_setup_complete_set_line_coding(struct usb_ep *ep,
- struct usb_request *req)
-{
- struct gs_dev *dev = ep->driver_data;
- struct gs_port *port = dev->dev_port[0]; /* ACM only has one port */
-
- switch (req->status) {
- case 0:
- /* normal completion */
- if (req->actual != sizeof(port->port_line_coding))
- usb_ep_set_halt(ep);
- else if (port) {
- struct usb_cdc_line_coding *value = req->buf;
-
- /* REVISIT: we currently just remember this data.
- * If we change that, (a) validate it first, then
- * (b) update whatever hardware needs updating.
- */
- spin_lock(&port->port_lock);
- port->port_line_coding = *value;
- spin_unlock(&port->port_lock);
- }
- break;
-
- case -ESHUTDOWN:
- /* disconnect */
- gs_free_req(ep, req);
- break;
-
- default:
- /* unexpected */
- break;
- }
- return;
-}
-
-static int gs_setup_class(struct usb_gadget *gadget,
- const struct usb_ctrlrequest *ctrl)
-{
- int ret = -EOPNOTSUPP;
- struct gs_dev *dev = get_gadget_data(gadget);
- struct gs_port *port = dev->dev_port[0]; /* ACM only has one port */
- struct usb_request *req = dev->dev_ctrl_req;
- u16 wIndex = le16_to_cpu(ctrl->wIndex);
- u16 wValue = le16_to_cpu(ctrl->wValue);
- u16 wLength = le16_to_cpu(ctrl->wLength);
-
- switch (ctrl->bRequest) {
- case USB_CDC_REQ_SET_LINE_CODING:
- if (wLength != sizeof(struct usb_cdc_line_coding))
- break;
- ret = wLength;
- req->complete = gs_setup_complete_set_line_coding;
- break;
-
- case USB_CDC_REQ_GET_LINE_CODING:
- ret = min_t(int, wLength, sizeof(struct usb_cdc_line_coding));
- if (port) {
- spin_lock(&port->port_lock);
- memcpy(req->buf, &port->port_line_coding, ret);
- spin_unlock(&port->port_lock);
- }
- break;
-
- case USB_CDC_REQ_SET_CONTROL_LINE_STATE:
- if (wLength != 0)
- break;
- ret = 0;
- if (port) {
- /* REVISIT: we currently just remember this data.
- * If we change that, update whatever hardware needs
- * updating.
- */
- spin_lock(&port->port_lock);
- port->port_handshake_bits = wValue;
- spin_unlock(&port->port_lock);
- }
- break;
-
- default:
- /* NOTE: strictly speaking, we should accept AT-commands
- * using SEND_ENCPSULATED_COMMAND/GET_ENCAPSULATED_RESPONSE.
- * But our call management descriptor says we don't handle
- * call management, so we should be able to get by without
- * handling those "required" commands (except by stalling).
- */
- pr_err("gs_setup: unknown class request, "
- "type=%02x, request=%02x, value=%04x, "
- "index=%04x, length=%d\n",
- ctrl->bRequestType, ctrl->bRequest,
- wValue, wIndex, wLength);
- break;
- }
-
- return ret;
-}
-
-/*
- * gs_setup_complete
- */
-static void gs_setup_complete(struct usb_ep *ep, struct usb_request *req)
-{
- if (req->status || req->actual != req->length) {
- pr_err("gs_setup_complete: status error, status=%d, "
- "actual=%d, length=%d\n",
- req->status, req->actual, req->length);
- }
-}
-
-/*
- * gs_setup
- *
- * Implements all the control endpoint functionality that's not
- * handled in hardware or the hardware driver.
- *
- * Returns the size of the data sent to the host, or a negative
- * error number.
- */
-static int gs_setup(struct usb_gadget *gadget,
- const struct usb_ctrlrequest *ctrl)
-{
- int ret = -EOPNOTSUPP;
- struct gs_dev *dev = get_gadget_data(gadget);
- struct usb_request *req = dev->dev_ctrl_req;
- u16 wIndex = le16_to_cpu(ctrl->wIndex);
- u16 wValue = le16_to_cpu(ctrl->wValue);
- u16 wLength = le16_to_cpu(ctrl->wLength);
-
- req->complete = gs_setup_complete;
-
- switch (ctrl->bRequestType & USB_TYPE_MASK) {
- case USB_TYPE_STANDARD:
- ret = gs_setup_standard(gadget, ctrl);
- break;
-
- case USB_TYPE_CLASS:
- ret = gs_setup_class(gadget, ctrl);
- break;
-
- default:
- pr_err("gs_setup: unknown request, type=%02x, request=%02x, "
- "value=%04x, index=%04x, length=%d\n",
- ctrl->bRequestType, ctrl->bRequest,
- wValue, wIndex, wLength);
- break;
- }
-
- /* respond with data transfer before status phase? */
- if (ret >= 0) {
- req->length = ret;
- req->zero = ret < wLength
- && (ret % gadget->ep0->maxpacket) == 0;
- ret = usb_ep_queue(gadget->ep0, req, GFP_ATOMIC);
- if (ret < 0) {
- pr_err("gs_setup: cannot queue response, ret=%d\n",
- ret);
- req->status = 0;
- gs_setup_complete(gadget->ep0, req);
- }
- }
-
- /* device either stalls (ret < 0) or reports success */
- return ret;
-}
-
-/*
- * gs_disconnect
- *
- * Called when the device is disconnected. Frees the closed
- * ports and disconnects open ports. Open ports will be freed
- * on close. Then reallocates the ports for the next connection.
- */
-static void gs_disconnect(struct usb_gadget *gadget)
-{
- unsigned long flags;
- struct gs_dev *dev = get_gadget_data(gadget);
-
- spin_lock_irqsave(&dev->dev_lock, flags);
-
- gs_reset_config(dev);
-
- /* free closed ports and disconnect open ports */
- /* (open ports will be freed when closed) */
- gs_free_ports(dev);
-
- /* re-allocate ports for the next connection */
- if (gs_alloc_ports(dev, GFP_ATOMIC) != 0)
- pr_err("gs_disconnect: cannot re-allocate ports\n");
-
- spin_unlock_irqrestore(&dev->dev_lock, flags);
-
- pr_info("gs_disconnect: %s disconnected\n", GS_LONG_NAME);
-}
-
-static struct usb_gadget_driver gs_gadget_driver = {
-#ifdef CONFIG_USB_GADGET_DUALSPEED
- .speed = USB_SPEED_HIGH,
-#else
- .speed = USB_SPEED_FULL,
-#endif /* CONFIG_USB_GADGET_DUALSPEED */
- .function = GS_LONG_NAME,
- .bind = gs_bind,
- .unbind = gs_unbind,
- .setup = gs_setup,
- .disconnect = gs_disconnect,
- .driver = {
- .name = GS_SHORT_NAME,
- .owner = THIS_MODULE,
- },
+static struct usb_composite_driver gserial_driver = {
+ .name = "g_serial",
+ .dev = &device_desc,
+ .strings = dev_strings,
+ .bind = gs_bind,
};
-/*
- * gs_set_config
- *
- * Configures the device by enabling device specific
- * optimizations, setting up the endpoints, allocating
- * read and write requests and queuing read requests.
- *
- * The device lock must be held when calling this function.
- */
-static int gs_set_config(struct gs_dev *dev, unsigned config)
+static int __init init(void)
{
- int i;
- int ret = 0;
- struct usb_gadget *gadget = dev->dev_gadget;
- struct usb_ep *ep;
- struct usb_endpoint_descriptor *out, *in, *notify;
- struct usb_request *req;
-
- if (dev == NULL) {
- pr_err("gs_set_config: NULL device pointer\n");
- return 0;
- }
-
- if (config == dev->dev_config)
- return 0;
-
- gs_reset_config(dev);
-
- switch (config) {
- case GS_NO_CONFIG_ID:
- return 0;
- case GS_BULK_CONFIG_ID:
- if (use_acm)
- return -EINVAL;
- break;
- case GS_ACM_CONFIG_ID:
- if (!use_acm)
- return -EINVAL;
- break;
- default:
- return -EINVAL;
- }
-
- in = choose_ep_desc(gadget,
- &gs_highspeed_in_desc,
- &gs_fullspeed_in_desc);
- out = choose_ep_desc(gadget,
- &gs_highspeed_out_desc,
- &gs_fullspeed_out_desc);
- notify = dev->dev_notify_ep
- ? choose_ep_desc(gadget,
- &gs_highspeed_notify_desc,
- &gs_fullspeed_notify_desc)
- : NULL;
-
- ret = usb_ep_enable(dev->dev_in_ep, in);
- if (ret == 0) {
- dev->dev_in_ep_desc = in;
- } else {
- pr_debug("%s: cannot enable %s %s, ret=%d\n",
- __func__, "IN", dev->dev_in_ep->name, ret);
- return ret;
- }
-
- ret = usb_ep_enable(dev->dev_out_ep, out);
- if (ret == 0) {
- dev->dev_out_ep_desc = out;
- } else {
- pr_debug("%s: cannot enable %s %s, ret=%d\n",
- __func__, "OUT", dev->dev_out_ep->name, ret);
-fail0:
- usb_ep_disable(dev->dev_in_ep);
- return ret;
- }
-
- if (notify) {
- ret = usb_ep_enable(dev->dev_notify_ep, notify);
- if (ret == 0) {
- dev->dev_notify_ep_desc = notify;
- } else {
- pr_debug("%s: cannot enable %s %s, ret=%d\n",
- __func__, "NOTIFY",
- dev->dev_notify_ep->name, ret);
- usb_ep_disable(dev->dev_out_ep);
- goto fail0;
- }
- }
-
- dev->dev_config = config;
-
- /* allocate and queue read requests */
- ep = dev->dev_out_ep;
- for (i=0; i<read_q_size && ret == 0; i++) {
- if ((req=gs_alloc_req(ep, ep->maxpacket, GFP_ATOMIC))) {
- req->complete = gs_read_complete;
- if ((ret=usb_ep_queue(ep, req, GFP_ATOMIC))) {
- pr_err("gs_set_config: cannot queue read "
- "request, ret=%d\n", ret);
- }
- } else {
- pr_err("gs_set_config: cannot allocate "
- "read requests\n");
- ret = -ENOMEM;
- goto exit_reset_config;
- }
- }
-
- /* allocate write requests, and put on free list */
- ep = dev->dev_in_ep;
- for (i=0; i<write_q_size; i++) {
- req = gs_alloc_req(ep, ep->maxpacket, GFP_ATOMIC);
- if (req) {
- req->complete = gs_write_complete;
- list_add(&req->list, &dev->dev_req_list);
- } else {
- pr_err("gs_set_config: cannot allocate "
- "write requests\n");
- ret = -ENOMEM;
- goto exit_reset_config;
- }
- }
-
- /* REVISIT the ACM mode should be able to actually *issue* some
- * notifications, for at least serial state change events if
- * not also for network connection; say so in bmCapabilities.
+ /* We *could* export two configs; that'd be much cleaner...
+ * but neither of these product IDs was defined that way.
*/
-
- pr_info("gs_set_config: %s configured, %s speed %s config\n",
- GS_LONG_NAME,
- gadget->speed == USB_SPEED_HIGH ? "high" : "full",
- config == GS_BULK_CONFIG_ID ? "BULK" : "CDC-ACM");
-
- return 0;
-
-exit_reset_config:
- gs_reset_config(dev);
- return ret;
-}
-
-/*
- * gs_reset_config
- *
- * Mark the device as not configured, disable all endpoints,
- * which forces completion of pending I/O and frees queued
- * requests, and free the remaining write requests on the
- * free list.
- *
- * The device lock must be held when calling this function.
- */
-static void gs_reset_config(struct gs_dev *dev)
-{
- struct usb_request *req;
-
- if (dev == NULL) {
- pr_err("gs_reset_config: NULL device pointer\n");
- return;
- }
-
- if (dev->dev_config == GS_NO_CONFIG_ID)
- return;
-
- dev->dev_config = GS_NO_CONFIG_ID;
-
- /* free write requests on the free list */
- while(!list_empty(&dev->dev_req_list)) {
- req = list_entry(dev->dev_req_list.next,
- struct usb_request, list);
- list_del(&req->list);
- gs_free_req(dev->dev_in_ep, req);
- }
-
- /* disable endpoints, forcing completion of pending i/o; */
- /* completion handlers free their requests in this case */
- if (dev->dev_notify_ep)
- usb_ep_disable(dev->dev_notify_ep);
- usb_ep_disable(dev->dev_in_ep);
- usb_ep_disable(dev->dev_out_ep);
-}
-
-/*
- * gs_build_config_buf
- *
- * Builds the config descriptors in the given buffer and returns the
- * length, or a negative error number.
- */
-static int gs_build_config_buf(u8 *buf, struct usb_gadget *g,
- u8 type, unsigned int index, int is_otg)
-{
- int len;
- int high_speed = 0;
- const struct usb_config_descriptor *config_desc;
- const struct usb_descriptor_header **function;
-
- if (index >= gs_device_desc.bNumConfigurations)
- return -EINVAL;
-
- /* other speed switches high and full speed */
- if (gadget_is_dualspeed(g)) {
- high_speed = (g->speed == USB_SPEED_HIGH);
- if (type == USB_DT_OTHER_SPEED_CONFIG)
- high_speed = !high_speed;
- }
-
if (use_acm) {
- config_desc = &gs_acm_config_desc;
- function = high_speed
- ? gs_acm_highspeed_function
- : gs_acm_fullspeed_function;
+ serial_config_driver.label = "CDC ACM config";
+ serial_config_driver.bConfigurationValue = 2;
+ device_desc.bDeviceClass = USB_CLASS_COMM;
+ device_desc.idProduct =
+ __constant_cpu_to_le16(GS_CDC_PRODUCT_ID);
} else {
- config_desc = &gs_bulk_config_desc;
- function = high_speed
- ? gs_bulk_highspeed_function
- : gs_bulk_fullspeed_function;
- }
-
- /* for now, don't advertise srp-only devices */
- if (!is_otg)
- function++;
-
- len = usb_gadget_config_buf(config_desc, buf, GS_MAX_DESC_LEN, function);
- if (len < 0)
- return len;
-
- ((struct usb_config_descriptor *)buf)->bDescriptorType = type;
-
- return len;
-}
-
-/*
- * gs_alloc_req
- *
- * Allocate a usb_request and its buffer. Returns a pointer to the
- * usb_request or NULL if there is an error.
- */
-static struct usb_request *
-gs_alloc_req(struct usb_ep *ep, unsigned int len, gfp_t kmalloc_flags)
-{
- struct usb_request *req;
-
- if (ep == NULL)
- return NULL;
-
- req = usb_ep_alloc_request(ep, kmalloc_flags);
-
- if (req != NULL) {
- req->length = len;
- req->buf = kmalloc(len, kmalloc_flags);
- if (req->buf == NULL) {
- usb_ep_free_request(ep, req);
- return NULL;
- }
+ serial_config_driver.label = "Generic Serial config";
+ serial_config_driver.bConfigurationValue = 1;
+ device_desc.bDeviceClass = USB_CLASS_VENDOR_SPEC;
+ device_desc.idProduct =
+ __constant_cpu_to_le16(GS_PRODUCT_ID);
}
+ strings_dev[STRING_DESCRIPTION_IDX].s = serial_config_driver.label;
- return req;
+ return usb_composite_register(&gserial_driver);
}
+module_init(init);
-/*
- * gs_free_req
- *
- * Free a usb_request and its buffer.
- */
-static void gs_free_req(struct usb_ep *ep, struct usb_request *req)
+static void __exit cleanup(void)
{
- if (ep != NULL && req != NULL) {
- kfree(req->buf);
- usb_ep_free_request(ep, req);
- }
-}
-
-/*
- * gs_alloc_ports
- *
- * Allocate all ports and set the gs_dev struct to point to them.
- * Return 0 if successful, or a negative error number.
- *
- * The device lock is normally held when calling this function.
- */
-static int gs_alloc_ports(struct gs_dev *dev, gfp_t kmalloc_flags)
-{
- int i;
- struct gs_port *port;
-
- if (dev == NULL)
- return -EIO;
-
- for (i=0; i<GS_NUM_PORTS; i++) {
- if ((port=kzalloc(sizeof(struct gs_port), kmalloc_flags)) == NULL)
- return -ENOMEM;
-
- port->port_dev = dev;
- port->port_num = i;
- port->port_line_coding.dwDTERate = cpu_to_le32(GS_DEFAULT_DTE_RATE);
- port->port_line_coding.bCharFormat = GS_DEFAULT_CHAR_FORMAT;
- port->port_line_coding.bParityType = GS_DEFAULT_PARITY;
- port->port_line_coding.bDataBits = GS_DEFAULT_DATA_BITS;
- spin_lock_init(&port->port_lock);
- init_waitqueue_head(&port->port_write_wait);
-
- dev->dev_port[i] = port;
- }
-
- return 0;
-}
-
-/*
- * gs_free_ports
- *
- * Free all closed ports. Open ports are disconnected by
- * freeing their write buffers, setting their device pointers
- * and the pointers to them in the device to NULL. These
- * ports will be freed when closed.
- *
- * The device lock is normally held when calling this function.
- */
-static void gs_free_ports(struct gs_dev *dev)
-{
- int i;
- unsigned long flags;
- struct gs_port *port;
-
- if (dev == NULL)
- return;
-
- for (i=0; i<GS_NUM_PORTS; i++) {
- if ((port=dev->dev_port[i]) != NULL) {
- dev->dev_port[i] = NULL;
-
- spin_lock_irqsave(&port->port_lock, flags);
-
- if (port->port_write_buf != NULL) {
- gs_buf_free(port->port_write_buf);
- port->port_write_buf = NULL;
- }
-
- if (port->port_open_count > 0 || port->port_in_use) {
- port->port_dev = NULL;
- wake_up_interruptible(&port->port_write_wait);
- if (port->port_tty) {
- tty_hangup(port->port_tty);
- }
- spin_unlock_irqrestore(&port->port_lock, flags);
- } else {
- spin_unlock_irqrestore(&port->port_lock, flags);
- kfree(port);
- }
-
- }
- }
-}
-
-/*-------------------------------------------------------------------------*/
-
-/* Circular Buffer */
-
-/*
- * gs_buf_alloc
- *
- * Allocate a circular buffer and all associated memory.
- */
-static struct gs_buf *gs_buf_alloc(unsigned int size, gfp_t kmalloc_flags)
-{
- struct gs_buf *gb;
-
- if (size == 0)
- return NULL;
-
- gb = kmalloc(sizeof(struct gs_buf), kmalloc_flags);
- if (gb == NULL)
- return NULL;
-
- gb->buf_buf = kmalloc(size, kmalloc_flags);
- if (gb->buf_buf == NULL) {
- kfree(gb);
- return NULL;
- }
-
- gb->buf_size = size;
- gb->buf_get = gb->buf_put = gb->buf_buf;
-
- return gb;
-}
-
-/*
- * gs_buf_free
- *
- * Free the buffer and all associated memory.
- */
-static void gs_buf_free(struct gs_buf *gb)
-{
- if (gb) {
- kfree(gb->buf_buf);
- kfree(gb);
- }
-}
-
-/*
- * gs_buf_clear
- *
- * Clear out all data in the circular buffer.
- */
-static void gs_buf_clear(struct gs_buf *gb)
-{
- if (gb != NULL)
- gb->buf_get = gb->buf_put;
- /* equivalent to a get of all data available */
-}
-
-/*
- * gs_buf_data_avail
- *
- * Return the number of bytes of data available in the circular
- * buffer.
- */
-static unsigned int gs_buf_data_avail(struct gs_buf *gb)
-{
- if (gb != NULL)
- return (gb->buf_size + gb->buf_put - gb->buf_get) % gb->buf_size;
- else
- return 0;
-}
-
-/*
- * gs_buf_space_avail
- *
- * Return the number of bytes of space available in the circular
- * buffer.
- */
-static unsigned int gs_buf_space_avail(struct gs_buf *gb)
-{
- if (gb != NULL)
- return (gb->buf_size + gb->buf_get - gb->buf_put - 1) % gb->buf_size;
- else
- return 0;
-}
-
-/*
- * gs_buf_put
- *
- * Copy data data from a user buffer and put it into the circular buffer.
- * Restrict to the amount of space available.
- *
- * Return the number of bytes copied.
- */
-static unsigned int
-gs_buf_put(struct gs_buf *gb, const char *buf, unsigned int count)
-{
- unsigned int len;
-
- if (gb == NULL)
- return 0;
-
- len = gs_buf_space_avail(gb);
- if (count > len)
- count = len;
-
- if (count == 0)
- return 0;
-
- len = gb->buf_buf + gb->buf_size - gb->buf_put;
- if (count > len) {
- memcpy(gb->buf_put, buf, len);
- memcpy(gb->buf_buf, buf+len, count - len);
- gb->buf_put = gb->buf_buf + count - len;
- } else {
- memcpy(gb->buf_put, buf, count);
- if (count < len)
- gb->buf_put += count;
- else /* count == len */
- gb->buf_put = gb->buf_buf;
- }
-
- return count;
-}
-
-/*
- * gs_buf_get
- *
- * Get data from the circular buffer and copy to the given buffer.
- * Restrict to the amount of data available.
- *
- * Return the number of bytes copied.
- */
-static unsigned int
-gs_buf_get(struct gs_buf *gb, char *buf, unsigned int count)
-{
- unsigned int len;
-
- if (gb == NULL)
- return 0;
-
- len = gs_buf_data_avail(gb);
- if (count > len)
- count = len;
-
- if (count == 0)
- return 0;
-
- len = gb->buf_buf + gb->buf_size - gb->buf_get;
- if (count > len) {
- memcpy(buf, gb->buf_get, len);
- memcpy(buf+len, gb->buf_buf, count - len);
- gb->buf_get = gb->buf_buf + count - len;
- } else {
- memcpy(buf, gb->buf_get, count);
- if (count < len)
- gb->buf_get += count;
- else /* count == len */
- gb->buf_get = gb->buf_buf;
- }
-
- return count;
-}
-
-/*-------------------------------------------------------------------------*/
-
-static struct tty_driver *gs_tty_driver;
-
-/*
- * gs_module_init
- *
- * Register as a USB gadget driver and a tty driver.
- */
-static int __init gs_module_init(void)
-{
- int i;
- int retval;
-
- retval = usb_gadget_register_driver(&gs_gadget_driver);
- if (retval) {
- pr_err("gs_module_init: cannot register gadget driver, "
- "ret=%d\n", retval);
- return retval;
- }
-
- gs_tty_driver = alloc_tty_driver(GS_NUM_PORTS);
- if (!gs_tty_driver)
- return -ENOMEM;
- gs_tty_driver->owner = THIS_MODULE;
- gs_tty_driver->driver_name = GS_SHORT_NAME;
- gs_tty_driver->name = "ttygs";
- gs_tty_driver->major = GS_MAJOR;
- gs_tty_driver->minor_start = GS_MINOR_START;
- gs_tty_driver->type = TTY_DRIVER_TYPE_SERIAL;
- gs_tty_driver->subtype = SERIAL_TYPE_NORMAL;
- gs_tty_driver->flags = TTY_DRIVER_REAL_RAW | TTY_DRIVER_DYNAMIC_DEV;
- gs_tty_driver->init_termios = tty_std_termios;
- /* must match GS_DEFAULT_DTE_RATE and friends */
- gs_tty_driver->init_termios.c_cflag =
- B9600 | CS8 | CREAD | HUPCL | CLOCAL;
- gs_tty_driver->init_termios.c_ispeed = GS_DEFAULT_DTE_RATE;
- gs_tty_driver->init_termios.c_ospeed = GS_DEFAULT_DTE_RATE;
- tty_set_operations(gs_tty_driver, &gs_tty_ops);
-
- for (i = 0; i < GS_NUM_PORTS; i++)
- mutex_init(&gs_open_close_lock[i]);
-
- retval = tty_register_driver(gs_tty_driver);
- if (retval) {
- usb_gadget_unregister_driver(&gs_gadget_driver);
- put_tty_driver(gs_tty_driver);
- pr_err("gs_module_init: cannot register tty driver, "
- "ret=%d\n", retval);
- return retval;
- }
-
- pr_info("gs_module_init: %s %s loaded\n",
- GS_LONG_NAME, GS_VERSION_STR);
- return 0;
-}
-module_init(gs_module_init);
-
-/*
- * gs_module_exit
- *
- * Unregister as a tty driver and a USB gadget driver.
- */
-static void __exit gs_module_exit(void)
-{
- tty_unregister_driver(gs_tty_driver);
- put_tty_driver(gs_tty_driver);
- usb_gadget_unregister_driver(&gs_gadget_driver);
-
- pr_info("gs_module_exit: %s %s unloaded\n",
- GS_LONG_NAME, GS_VERSION_STR);
+ usb_composite_unregister(&gserial_driver);
+ gserial_cleanup();
}
-module_exit(gs_module_exit);
+module_exit(cleanup);
diff --git a/drivers/usb/gadget/u_ether.c b/drivers/usb/gadget/u_ether.c
new file mode 100644
index 00000000000..5458f43a866
--- /dev/null
+++ b/drivers/usb/gadget/u_ether.c
@@ -0,0 +1,967 @@
+/*
+ * u_ether.c -- Ethernet-over-USB link layer utilities for Gadget stack
+ *
+ * Copyright (C) 2003-2005,2008 David Brownell
+ * Copyright (C) 2003-2004 Robert Schwebel, Benedikt Spranger
+ * Copyright (C) 2008 Nokia Corporation
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
+ */
+
+/* #define VERBOSE_DEBUG */
+
+#include <linux/kernel.h>
+#include <linux/utsname.h>
+#include <linux/device.h>
+#include <linux/ctype.h>
+#include <linux/etherdevice.h>
+#include <linux/ethtool.h>
+
+#include "u_ether.h"
+
+
+/*
+ * This component encapsulates the Ethernet link glue needed to provide
+ * one (!) network link through the USB gadget stack, normally "usb0".
+ *
+ * The control and data models are handled by the function driver which
+ * connects to this code; such as CDC Ethernet, "CDC Subset", or RNDIS.
+ * That includes all descriptor and endpoint management.
+ *
+ * Link level addressing is handled by this component using module
+ * parameters; if no such parameters are provided, random link level
+ * addresses are used. Each end of the link uses one address. The
+ * host end address is exported in various ways, and is often recorded
+ * in configuration databases.
+ *
+ * The driver which assembles each configuration using such a link is
+ * responsible for ensuring that each configuration includes at most one
+ * instance of is network link. (The network layer provides ways for
+ * this single "physical" link to be used by multiple virtual links.)
+ */
+
+#define DRIVER_VERSION "29-May-2008"
+
+struct eth_dev {
+ /* lock is held while accessing port_usb
+ * or updating its backlink port_usb->ioport
+ */
+ spinlock_t lock;
+ struct gether *port_usb;
+
+ struct net_device *net;
+ struct usb_gadget *gadget;
+
+ spinlock_t req_lock; /* guard {rx,tx}_reqs */
+ struct list_head tx_reqs, rx_reqs;
+ atomic_t tx_qlen;
+
+ unsigned header_len;
+ struct sk_buff *(*wrap)(struct sk_buff *skb);
+ int (*unwrap)(struct sk_buff *skb);
+
+ struct work_struct work;
+
+ unsigned long todo;
+#define WORK_RX_MEMORY 0
+
+ bool zlp;
+ u8 host_mac[ETH_ALEN];
+};
+
+/*-------------------------------------------------------------------------*/
+
+#define RX_EXTRA 20 /* bytes guarding against rx overflows */
+
+#define DEFAULT_QLEN 2 /* double buffering by default */
+
+
+#ifdef CONFIG_USB_GADGET_DUALSPEED
+
+static unsigned qmult = 5;
+module_param(qmult, uint, S_IRUGO|S_IWUSR);
+MODULE_PARM_DESC(qmult, "queue length multiplier at high speed");
+
+#else /* full speed (low speed doesn't do bulk) */
+#define qmult 1
+#endif
+
+/* for dual-speed hardware, use deeper queues at highspeed */
+static inline int qlen(struct usb_gadget *gadget)
+{
+ if (gadget_is_dualspeed(gadget) && gadget->speed == USB_SPEED_HIGH)
+ return qmult * DEFAULT_QLEN;
+ else
+ return DEFAULT_QLEN;
+}
+
+/*-------------------------------------------------------------------------*/
+
+/* REVISIT there must be a better way than having two sets
+ * of debug calls ...
+ */
+
+#undef DBG
+#undef VDBG
+#undef ERROR
+#undef WARN
+#undef INFO
+
+#define xprintk(d, level, fmt, args...) \
+ printk(level "%s: " fmt , (d)->net->name , ## args)
+
+#ifdef DEBUG
+#undef DEBUG
+#define DBG(dev, fmt, args...) \
+ xprintk(dev , KERN_DEBUG , fmt , ## args)
+#else
+#define DBG(dev, fmt, args...) \
+ do { } while (0)
+#endif /* DEBUG */
+
+#ifdef VERBOSE_DEBUG
+#define VDBG DBG
+#else
+#define VDBG(dev, fmt, args...) \
+ do { } while (0)
+#endif /* DEBUG */
+
+#define ERROR(dev, fmt, args...) \
+ xprintk(dev , KERN_ERR , fmt , ## args)
+#define WARN(dev, fmt, args...) \
+ xprintk(dev , KERN_WARNING , fmt , ## args)
+#define INFO(dev, fmt, args...) \
+ xprintk(dev , KERN_INFO , fmt , ## args)
+
+/*-------------------------------------------------------------------------*/
+
+/* NETWORK DRIVER HOOKUP (to the layer above this driver) */
+
+static int eth_change_mtu(struct net_device *net, int new_mtu)
+{
+ struct eth_dev *dev = netdev_priv(net);
+ unsigned long flags;
+ int status = 0;
+
+ /* don't change MTU on "live" link (peer won't know) */
+ spin_lock_irqsave(&dev->lock, flags);
+ if (dev->port_usb)
+ status = -EBUSY;
+ else if (new_mtu <= ETH_HLEN || new_mtu > ETH_FRAME_LEN)
+ status = -ERANGE;
+ else
+ net->mtu = new_mtu;
+ spin_unlock_irqrestore(&dev->lock, flags);
+
+ return status;
+}
+
+static void eth_get_drvinfo(struct net_device *net, struct ethtool_drvinfo *p)
+{
+ struct eth_dev *dev = netdev_priv(net);
+
+ strlcpy(p->driver, "g_ether", sizeof p->driver);
+ strlcpy(p->version, DRIVER_VERSION, sizeof p->version);
+ strlcpy(p->fw_version, dev->gadget->name, sizeof p->fw_version);
+ strlcpy(p->bus_info, dev_name(&dev->gadget->dev), sizeof p->bus_info);
+}
+
+static u32 eth_get_link(struct net_device *net)
+{
+ struct eth_dev *dev = netdev_priv(net);
+ return dev->gadget->speed != USB_SPEED_UNKNOWN;
+}
+
+/* REVISIT can also support:
+ * - WOL (by tracking suspends and issuing remote wakeup)
+ * - msglevel (implies updated messaging)
+ * - ... probably more ethtool ops
+ */
+
+static struct ethtool_ops ops = {
+ .get_drvinfo = eth_get_drvinfo,
+ .get_link = eth_get_link
+};
+
+static void defer_kevent(struct eth_dev *dev, int flag)
+{
+ if (test_and_set_bit(flag, &dev->todo))
+ return;
+ if (!schedule_work(&dev->work))
+ ERROR(dev, "kevent %d may have been dropped\n", flag);
+ else
+ DBG(dev, "kevent %d scheduled\n", flag);
+}
+
+static void rx_complete(struct usb_ep *ep, struct usb_request *req);
+
+static int
+rx_submit(struct eth_dev *dev, struct usb_request *req, gfp_t gfp_flags)
+{
+ struct sk_buff *skb;
+ int retval = -ENOMEM;
+ size_t size = 0;
+ struct usb_ep *out;
+ unsigned long flags;
+
+ spin_lock_irqsave(&dev->lock, flags);
+ if (dev->port_usb)
+ out = dev->port_usb->out_ep;
+ else
+ out = NULL;
+ spin_unlock_irqrestore(&dev->lock, flags);
+
+ if (!out)
+ return -ENOTCONN;
+
+
+ /* Padding up to RX_EXTRA handles minor disagreements with host.
+ * Normally we use the USB "terminate on short read" convention;
+ * so allow up to (N*maxpacket), since that memory is normally
+ * already allocated. Some hardware doesn't deal well with short
+ * reads (e.g. DMA must be N*maxpacket), so for now don't trim a
+ * byte off the end (to force hardware errors on overflow).
+ *
+ * RNDIS uses internal framing, and explicitly allows senders to
+ * pad to end-of-packet. That's potentially nice for speed, but
+ * means receivers can't recover lost synch on their own (because
+ * new packets don't only start after a short RX).
+ */
+ size += sizeof(struct ethhdr) + dev->net->mtu + RX_EXTRA;
+ size += dev->port_usb->header_len;
+ size += out->maxpacket - 1;
+ size -= size % out->maxpacket;
+
+ skb = alloc_skb(size + NET_IP_ALIGN, gfp_flags);
+ if (skb == NULL) {
+ DBG(dev, "no rx skb\n");
+ goto enomem;
+ }
+
+ /* Some platforms perform better when IP packets are aligned,
+ * but on at least one, checksumming fails otherwise. Note:
+ * RNDIS headers involve variable numbers of LE32 values.
+ */
+ skb_reserve(skb, NET_IP_ALIGN);
+
+ req->buf = skb->data;
+ req->length = size;
+ req->complete = rx_complete;
+ req->context = skb;
+
+ retval = usb_ep_queue(out, req, gfp_flags);
+ if (retval == -ENOMEM)
+enomem:
+ defer_kevent(dev, WORK_RX_MEMORY);
+ if (retval) {
+ DBG(dev, "rx submit --> %d\n", retval);
+ if (skb)
+ dev_kfree_skb_any(skb);
+ spin_lock_irqsave(&dev->req_lock, flags);
+ list_add(&req->list, &dev->rx_reqs);
+ spin_unlock_irqrestore(&dev->req_lock, flags);
+ }
+ return retval;
+}
+
+static void rx_complete(struct usb_ep *ep, struct usb_request *req)
+{
+ struct sk_buff *skb = req->context;
+ struct eth_dev *dev = ep->driver_data;
+ int status = req->status;
+
+ switch (status) {
+
+ /* normal completion */
+ case 0:
+ skb_put(skb, req->actual);
+ if (dev->unwrap)
+ status = dev->unwrap(skb);
+ if (status < 0
+ || ETH_HLEN > skb->len
+ || skb->len > ETH_FRAME_LEN) {
+ dev->net->stats.rx_errors++;
+ dev->net->stats.rx_length_errors++;
+ DBG(dev, "rx length %d\n", skb->len);
+ break;
+ }
+
+ skb->protocol = eth_type_trans(skb, dev->net);
+ dev->net->stats.rx_packets++;
+ dev->net->stats.rx_bytes += skb->len;
+
+ /* no buffer copies needed, unless hardware can't
+ * use skb buffers.
+ */
+ status = netif_rx(skb);
+ skb = NULL;
+ break;
+
+ /* software-driven interface shutdown */
+ case -ECONNRESET: /* unlink */
+ case -ESHUTDOWN: /* disconnect etc */
+ VDBG(dev, "rx shutdown, code %d\n", status);
+ goto quiesce;
+
+ /* for hardware automagic (such as pxa) */
+ case -ECONNABORTED: /* endpoint reset */
+ DBG(dev, "rx %s reset\n", ep->name);
+ defer_kevent(dev, WORK_RX_MEMORY);
+quiesce:
+ dev_kfree_skb_any(skb);
+ goto clean;
+
+ /* data overrun */
+ case -EOVERFLOW:
+ dev->net->stats.rx_over_errors++;
+ /* FALLTHROUGH */
+
+ default:
+ dev->net->stats.rx_errors++;
+ DBG(dev, "rx status %d\n", status);
+ break;
+ }
+
+ if (skb)
+ dev_kfree_skb_any(skb);
+ if (!netif_running(dev->net)) {
+clean:
+ spin_lock(&dev->req_lock);
+ list_add(&req->list, &dev->rx_reqs);
+ spin_unlock(&dev->req_lock);
+ req = NULL;
+ }
+ if (req)
+ rx_submit(dev, req, GFP_ATOMIC);
+}
+
+static int prealloc(struct list_head *list, struct usb_ep *ep, unsigned n)
+{
+ unsigned i;
+ struct usb_request *req;
+
+ if (!n)
+ return -ENOMEM;
+
+ /* queue/recycle up to N requests */
+ i = n;
+ list_for_each_entry(req, list, list) {
+ if (i-- == 0)
+ goto extra;
+ }
+ while (i--) {
+ req = usb_ep_alloc_request(ep, GFP_ATOMIC);
+ if (!req)
+ return list_empty(list) ? -ENOMEM : 0;
+ list_add(&req->list, list);
+ }
+ return 0;
+
+extra:
+ /* free extras */
+ for (;;) {
+ struct list_head *next;
+
+ next = req->list.next;
+ list_del(&req->list);
+ usb_ep_free_request(ep, req);
+
+ if (next == list)
+ break;
+
+ req = container_of(next, struct usb_request, list);
+ }
+ return 0;
+}
+
+static int alloc_requests(struct eth_dev *dev, struct gether *link, unsigned n)
+{
+ int status;
+
+ spin_lock(&dev->req_lock);
+ status = prealloc(&dev->tx_reqs, link->in_ep, n);
+ if (status < 0)
+ goto fail;
+ status = prealloc(&dev->rx_reqs, link->out_ep, n);
+ if (status < 0)
+ goto fail;
+ goto done;
+fail:
+ DBG(dev, "can't alloc requests\n");
+done:
+ spin_unlock(&dev->req_lock);
+ return status;
+}
+
+static void rx_fill(struct eth_dev *dev, gfp_t gfp_flags)
+{
+ struct usb_request *req;
+ unsigned long flags;
+
+ /* fill unused rxq slots with some skb */
+ spin_lock_irqsave(&dev->req_lock, flags);
+ while (!list_empty(&dev->rx_reqs)) {
+ req = container_of(dev->rx_reqs.next,
+ struct usb_request, list);
+ list_del_init(&req->list);
+ spin_unlock_irqrestore(&dev->req_lock, flags);
+
+ if (rx_submit(dev, req, gfp_flags) < 0) {
+ defer_kevent(dev, WORK_RX_MEMORY);
+ return;
+ }
+
+ spin_lock_irqsave(&dev->req_lock, flags);
+ }
+ spin_unlock_irqrestore(&dev->req_lock, flags);
+}
+
+static void eth_work(struct work_struct *work)
+{
+ struct eth_dev *dev = container_of(work, struct eth_dev, work);
+
+ if (test_and_clear_bit(WORK_RX_MEMORY, &dev->todo)) {
+ if (netif_running(dev->net))
+ rx_fill(dev, GFP_KERNEL);
+ }
+
+ if (dev->todo)
+ DBG(dev, "work done, flags = 0x%lx\n", dev->todo);
+}
+
+static void tx_complete(struct usb_ep *ep, struct usb_request *req)
+{
+ struct sk_buff *skb = req->context;
+ struct eth_dev *dev = ep->driver_data;
+
+ switch (req->status) {
+ default:
+ dev->net->stats.tx_errors++;
+ VDBG(dev, "tx err %d\n", req->status);
+ /* FALLTHROUGH */
+ case -ECONNRESET: /* unlink */
+ case -ESHUTDOWN: /* disconnect etc */
+ break;
+ case 0:
+ dev->net->stats.tx_bytes += skb->len;
+ }
+ dev->net->stats.tx_packets++;
+
+ spin_lock(&dev->req_lock);
+ list_add(&req->list, &dev->tx_reqs);
+ spin_unlock(&dev->req_lock);
+ dev_kfree_skb_any(skb);
+
+ atomic_dec(&dev->tx_qlen);
+ if (netif_carrier_ok(dev->net))
+ netif_wake_queue(dev->net);
+}
+
+static inline int is_promisc(u16 cdc_filter)
+{
+ return cdc_filter & USB_CDC_PACKET_TYPE_PROMISCUOUS;
+}
+
+static int eth_start_xmit(struct sk_buff *skb, struct net_device *net)
+{
+ struct eth_dev *dev = netdev_priv(net);
+ int length = skb->len;
+ int retval;
+ struct usb_request *req = NULL;
+ unsigned long flags;
+ struct usb_ep *in;
+ u16 cdc_filter;
+
+ spin_lock_irqsave(&dev->lock, flags);
+ if (dev->port_usb) {
+ in = dev->port_usb->in_ep;
+ cdc_filter = dev->port_usb->cdc_filter;
+ } else {
+ in = NULL;
+ cdc_filter = 0;
+ }
+ spin_unlock_irqrestore(&dev->lock, flags);
+
+ if (!in) {
+ dev_kfree_skb_any(skb);
+ return 0;
+ }
+
+ /* apply outgoing CDC or RNDIS filters */
+ if (!is_promisc(cdc_filter)) {
+ u8 *dest = skb->data;
+
+ if (is_multicast_ether_addr(dest)) {
+ u16 type;
+
+ /* ignores USB_CDC_PACKET_TYPE_MULTICAST and host
+ * SET_ETHERNET_MULTICAST_FILTERS requests
+ */
+ if (is_broadcast_ether_addr(dest))
+ type = USB_CDC_PACKET_TYPE_BROADCAST;
+ else
+ type = USB_CDC_PACKET_TYPE_ALL_MULTICAST;
+ if (!(cdc_filter & type)) {
+ dev_kfree_skb_any(skb);
+ return 0;
+ }
+ }
+ /* ignores USB_CDC_PACKET_TYPE_DIRECTED */
+ }
+
+ spin_lock_irqsave(&dev->req_lock, flags);
+ /*
+ * this freelist can be empty if an interrupt triggered disconnect()
+ * and reconfigured the gadget (shutting down this queue) after the
+ * network stack decided to xmit but before we got the spinlock.
+ */
+ if (list_empty(&dev->tx_reqs)) {
+ spin_unlock_irqrestore(&dev->req_lock, flags);
+ return 1;
+ }
+
+ req = container_of(dev->tx_reqs.next, struct usb_request, list);
+ list_del(&req->list);
+
+ /* temporarily stop TX queue when the freelist empties */
+ if (list_empty(&dev->tx_reqs))
+ netif_stop_queue(net);
+ spin_unlock_irqrestore(&dev->req_lock, flags);
+
+ /* no buffer copies needed, unless the network stack did it
+ * or the hardware can't use skb buffers.
+ * or there's not enough space for extra headers we need
+ */
+ if (dev->wrap) {
+ struct sk_buff *skb_new;
+
+ skb_new = dev->wrap(skb);
+ if (!skb_new)
+ goto drop;
+
+ dev_kfree_skb_any(skb);
+ skb = skb_new;
+ length = skb->len;
+ }
+ req->buf = skb->data;
+ req->context = skb;
+ req->complete = tx_complete;
+
+ /* use zlp framing on tx for strict CDC-Ether conformance,
+ * though any robust network rx path ignores extra padding.
+ * and some hardware doesn't like to write zlps.
+ */
+ req->zero = 1;
+ if (!dev->zlp && (length % in->maxpacket) == 0)
+ length++;
+
+ req->length = length;
+
+ /* throttle highspeed IRQ rate back slightly */
+ if (gadget_is_dualspeed(dev->gadget))
+ req->no_interrupt = (dev->gadget->speed == USB_SPEED_HIGH)
+ ? ((atomic_read(&dev->tx_qlen) % qmult) != 0)
+ : 0;
+
+ retval = usb_ep_queue(in, req, GFP_ATOMIC);
+ switch (retval) {
+ default:
+ DBG(dev, "tx queue err %d\n", retval);
+ break;
+ case 0:
+ net->trans_start = jiffies;
+ atomic_inc(&dev->tx_qlen);
+ }
+
+ if (retval) {
+drop:
+ dev->net->stats.tx_dropped++;
+ dev_kfree_skb_any(skb);
+ spin_lock_irqsave(&dev->req_lock, flags);
+ if (list_empty(&dev->tx_reqs))
+ netif_start_queue(net);
+ list_add(&req->list, &dev->tx_reqs);
+ spin_unlock_irqrestore(&dev->req_lock, flags);
+ }
+ return 0;
+}
+
+/*-------------------------------------------------------------------------*/
+
+static void eth_start(struct eth_dev *dev, gfp_t gfp_flags)
+{
+ DBG(dev, "%s\n", __func__);
+
+ /* fill the rx queue */
+ rx_fill(dev, gfp_flags);
+
+ /* and open the tx floodgates */
+ atomic_set(&dev->tx_qlen, 0);
+ netif_wake_queue(dev->net);
+}
+
+static int eth_open(struct net_device *net)
+{
+ struct eth_dev *dev = netdev_priv(net);
+ struct gether *link;
+
+ DBG(dev, "%s\n", __func__);
+ if (netif_carrier_ok(dev->net))
+ eth_start(dev, GFP_KERNEL);
+
+ spin_lock_irq(&dev->lock);
+ link = dev->port_usb;
+ if (link && link->open)
+ link->open(link);
+ spin_unlock_irq(&dev->lock);
+
+ return 0;
+}
+
+static int eth_stop(struct net_device *net)
+{
+ struct eth_dev *dev = netdev_priv(net);
+ unsigned long flags;
+
+ VDBG(dev, "%s\n", __func__);
+ netif_stop_queue(net);
+
+ DBG(dev, "stop stats: rx/tx %ld/%ld, errs %ld/%ld\n",
+ dev->net->stats.rx_packets, dev->net->stats.tx_packets,
+ dev->net->stats.rx_errors, dev->net->stats.tx_errors
+ );
+
+ /* ensure there are no more active requests */
+ spin_lock_irqsave(&dev->lock, flags);
+ if (dev->port_usb) {
+ struct gether *link = dev->port_usb;
+
+ if (link->close)
+ link->close(link);
+
+ /* NOTE: we have no abort-queue primitive we could use
+ * to cancel all pending I/O. Instead, we disable then
+ * reenable the endpoints ... this idiom may leave toggle
+ * wrong, but that's a self-correcting error.
+ *
+ * REVISIT: we *COULD* just let the transfers complete at
+ * their own pace; the network stack can handle old packets.
+ * For the moment we leave this here, since it works.
+ */
+ usb_ep_disable(link->in_ep);
+ usb_ep_disable(link->out_ep);
+ if (netif_carrier_ok(net)) {
+ DBG(dev, "host still using in/out endpoints\n");
+ usb_ep_enable(link->in_ep, link->in);
+ usb_ep_enable(link->out_ep, link->out);
+ }
+ }
+ spin_unlock_irqrestore(&dev->lock, flags);
+
+ return 0;
+}
+
+/*-------------------------------------------------------------------------*/
+
+/* initial value, changed by "ifconfig usb0 hw ether xx:xx:xx:xx:xx:xx" */
+static char *dev_addr;
+module_param(dev_addr, charp, S_IRUGO);
+MODULE_PARM_DESC(dev_addr, "Device Ethernet Address");
+
+/* this address is invisible to ifconfig */
+static char *host_addr;
+module_param(host_addr, charp, S_IRUGO);
+MODULE_PARM_DESC(host_addr, "Host Ethernet Address");
+
+
+static u8 __init nibble(unsigned char c)
+{
+ if (isdigit(c))
+ return c - '0';
+ c = toupper(c);
+ if (isxdigit(c))
+ return 10 + c - 'A';
+ return 0;
+}
+
+static int __init get_ether_addr(const char *str, u8 *dev_addr)
+{
+ if (str) {
+ unsigned i;
+
+ for (i = 0; i < 6; i++) {
+ unsigned char num;
+
+ if ((*str == '.') || (*str == ':'))
+ str++;
+ num = nibble(*str++) << 4;
+ num |= (nibble(*str++));
+ dev_addr [i] = num;
+ }
+ if (is_valid_ether_addr(dev_addr))
+ return 0;
+ }
+ random_ether_addr(dev_addr);
+ return 1;
+}
+
+static struct eth_dev *the_dev;
+
+
+/**
+ * gether_setup - initialize one ethernet-over-usb link
+ * @g: gadget to associated with these links
+ * @ethaddr: NULL, or a buffer in which the ethernet address of the
+ * host side of the link is recorded
+ * Context: may sleep
+ *
+ * This sets up the single network link that may be exported by a
+ * gadget driver using this framework. The link layer addresses are
+ * set up using module parameters.
+ *
+ * Returns negative errno, or zero on success
+ */
+int __init gether_setup(struct usb_gadget *g, u8 ethaddr[ETH_ALEN])
+{
+ struct eth_dev *dev;
+ struct net_device *net;
+ int status;
+
+ if (the_dev)
+ return -EBUSY;
+
+ net = alloc_etherdev(sizeof *dev);
+ if (!net)
+ return -ENOMEM;
+
+ dev = netdev_priv(net);
+ spin_lock_init(&dev->lock);
+ spin_lock_init(&dev->req_lock);
+ INIT_WORK(&dev->work, eth_work);
+ INIT_LIST_HEAD(&dev->tx_reqs);
+ INIT_LIST_HEAD(&dev->rx_reqs);
+
+ /* network device setup */
+ dev->net = net;
+ strcpy(net->name, "usb%d");
+
+ if (get_ether_addr(dev_addr, net->dev_addr))
+ dev_warn(&g->dev,
+ "using random %s ethernet address\n", "self");
+ if (get_ether_addr(host_addr, dev->host_mac))
+ dev_warn(&g->dev,
+ "using random %s ethernet address\n", "host");
+
+ if (ethaddr)
+ memcpy(ethaddr, dev->host_mac, ETH_ALEN);
+
+ net->change_mtu = eth_change_mtu;
+ net->hard_start_xmit = eth_start_xmit;
+ net->open = eth_open;
+ net->stop = eth_stop;
+ /* watchdog_timeo, tx_timeout ... */
+ /* set_multicast_list */
+ SET_ETHTOOL_OPS(net, &ops);
+
+ /* two kinds of host-initiated state changes:
+ * - iff DATA transfer is active, carrier is "on"
+ * - tx queueing enabled if open *and* carrier is "on"
+ */
+ netif_stop_queue(net);
+ netif_carrier_off(net);
+
+ dev->gadget = g;
+ SET_NETDEV_DEV(net, &g->dev);
+
+ status = register_netdev(net);
+ if (status < 0) {
+ dev_dbg(&g->dev, "register_netdev failed, %d\n", status);
+ free_netdev(net);
+ } else {
+ DECLARE_MAC_BUF(tmp);
+
+ INFO(dev, "MAC %s\n", print_mac(tmp, net->dev_addr));
+ INFO(dev, "HOST MAC %s\n", print_mac(tmp, dev->host_mac));
+
+ the_dev = dev;
+ }
+
+ return status;
+}
+
+/**
+ * gether_cleanup - remove Ethernet-over-USB device
+ * Context: may sleep
+ *
+ * This is called to free all resources allocated by @gether_setup().
+ */
+void gether_cleanup(void)
+{
+ if (!the_dev)
+ return;
+
+ unregister_netdev(the_dev->net);
+ free_netdev(the_dev->net);
+
+ /* assuming we used keventd, it must quiesce too */
+ flush_scheduled_work();
+
+ the_dev = NULL;
+}
+
+
+/**
+ * gether_connect - notify network layer that USB link is active
+ * @link: the USB link, set up with endpoints, descriptors matching
+ * current device speed, and any framing wrapper(s) set up.
+ * Context: irqs blocked
+ *
+ * This is called to activate endpoints and let the network layer know
+ * the connection is active ("carrier detect"). It may cause the I/O
+ * queues to open and start letting network packets flow, but will in
+ * any case activate the endpoints so that they respond properly to the
+ * USB host.
+ *
+ * Verify net_device pointer returned using IS_ERR(). If it doesn't
+ * indicate some error code (negative errno), ep->driver_data values
+ * have been overwritten.
+ */
+struct net_device *gether_connect(struct gether *link)
+{
+ struct eth_dev *dev = the_dev;
+ int result = 0;
+
+ if (!dev)
+ return ERR_PTR(-EINVAL);
+
+ link->in_ep->driver_data = dev;
+ result = usb_ep_enable(link->in_ep, link->in);
+ if (result != 0) {
+ DBG(dev, "enable %s --> %d\n",
+ link->in_ep->name, result);
+ goto fail0;
+ }
+
+ link->out_ep->driver_data = dev;
+ result = usb_ep_enable(link->out_ep, link->out);
+ if (result != 0) {
+ DBG(dev, "enable %s --> %d\n",
+ link->out_ep->name, result);
+ goto fail1;
+ }
+
+ if (result == 0)
+ result = alloc_requests(dev, link, qlen(dev->gadget));
+
+ if (result == 0) {
+ dev->zlp = link->is_zlp_ok;
+ DBG(dev, "qlen %d\n", qlen(dev->gadget));
+
+ dev->header_len = link->header_len;
+ dev->unwrap = link->unwrap;
+ dev->wrap = link->wrap;
+
+ spin_lock(&dev->lock);
+ dev->port_usb = link;
+ link->ioport = dev;
+ spin_unlock(&dev->lock);
+
+ netif_carrier_on(dev->net);
+ if (netif_running(dev->net))
+ eth_start(dev, GFP_ATOMIC);
+
+ /* on error, disable any endpoints */
+ } else {
+ (void) usb_ep_disable(link->out_ep);
+fail1:
+ (void) usb_ep_disable(link->in_ep);
+ }
+fail0:
+ /* caller is responsible for cleanup on error */
+ if (result < 0)
+ return ERR_PTR(result);
+ return dev->net;
+}
+
+/**
+ * gether_disconnect - notify network layer that USB link is inactive
+ * @link: the USB link, on which gether_connect() was called
+ * Context: irqs blocked
+ *
+ * This is called to deactivate endpoints and let the network layer know
+ * the connection went inactive ("no carrier").
+ *
+ * On return, the state is as if gether_connect() had never been called.
+ * The endpoints are inactive, and accordingly without active USB I/O.
+ * Pointers to endpoint descriptors and endpoint private data are nulled.
+ */
+void gether_disconnect(struct gether *link)
+{
+ struct eth_dev *dev = link->ioport;
+ struct usb_request *req;
+
+ WARN_ON(!dev);
+ if (!dev)
+ return;
+
+ DBG(dev, "%s\n", __func__);
+
+ netif_stop_queue(dev->net);
+ netif_carrier_off(dev->net);
+
+ /* disable endpoints, forcing (synchronous) completion
+ * of all pending i/o. then free the request objects
+ * and forget about the endpoints.
+ */
+ usb_ep_disable(link->in_ep);
+ spin_lock(&dev->req_lock);
+ while (!list_empty(&dev->tx_reqs)) {
+ req = container_of(dev->tx_reqs.next,
+ struct usb_request, list);
+ list_del(&req->list);
+
+ spin_unlock(&dev->req_lock);
+ usb_ep_free_request(link->in_ep, req);
+ spin_lock(&dev->req_lock);
+ }
+ spin_unlock(&dev->req_lock);
+ link->in_ep->driver_data = NULL;
+ link->in = NULL;
+
+ usb_ep_disable(link->out_ep);
+ spin_lock(&dev->req_lock);
+ while (!list_empty(&dev->rx_reqs)) {
+ req = container_of(dev->rx_reqs.next,
+ struct usb_request, list);
+ list_del(&req->list);
+
+ spin_unlock(&dev->req_lock);
+ usb_ep_free_request(link->out_ep, req);
+ spin_lock(&dev->req_lock);
+ }
+ spin_unlock(&dev->req_lock);
+ link->out_ep->driver_data = NULL;
+ link->out = NULL;
+
+ /* finish forgetting about this USB link episode */
+ dev->header_len = 0;
+ dev->unwrap = NULL;
+ dev->wrap = NULL;
+
+ spin_lock(&dev->lock);
+ dev->port_usb = NULL;
+ link->ioport = NULL;
+ spin_unlock(&dev->lock);
+}
diff --git a/drivers/usb/gadget/u_ether.h b/drivers/usb/gadget/u_ether.h
new file mode 100644
index 00000000000..0d1f7ae3b07
--- /dev/null
+++ b/drivers/usb/gadget/u_ether.h
@@ -0,0 +1,127 @@
+/*
+ * u_ether.h -- interface to USB gadget "ethernet link" utilities
+ *
+ * Copyright (C) 2003-2005,2008 David Brownell
+ * Copyright (C) 2003-2004 Robert Schwebel, Benedikt Spranger
+ * Copyright (C) 2008 Nokia Corporation
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
+ */
+
+#ifndef __U_ETHER_H
+#define __U_ETHER_H
+
+#include <linux/err.h>
+#include <linux/if_ether.h>
+#include <linux/usb/composite.h>
+#include <linux/usb/cdc.h>
+
+#include "gadget_chips.h"
+
+
+/*
+ * This represents the USB side of an "ethernet" link, managed by a USB
+ * function which provides control and (maybe) framing. Two functions
+ * in different configurations could share the same ethernet link/netdev,
+ * using different host interaction models.
+ *
+ * There is a current limitation that only one instance of this link may
+ * be present in any given configuration. When that's a problem, network
+ * layer facilities can be used to package multiple logical links on this
+ * single "physical" one.
+ */
+struct gether {
+ struct usb_function func;
+
+ /* updated by gether_{connect,disconnect} */
+ struct eth_dev *ioport;
+
+ /* endpoints handle full and/or high speeds */
+ struct usb_ep *in_ep;
+ struct usb_ep *out_ep;
+
+ /* descriptors match device speed at gether_connect() time */
+ struct usb_endpoint_descriptor *in;
+ struct usb_endpoint_descriptor *out;
+
+ bool is_zlp_ok;
+
+ u16 cdc_filter;
+
+ /* hooks for added framing, as needed for RNDIS and EEM.
+ * we currently don't support multiple frames per SKB.
+ */
+ u32 header_len;
+ struct sk_buff *(*wrap)(struct sk_buff *skb);
+ int (*unwrap)(struct sk_buff *skb);
+
+ /* called on network open/close */
+ void (*open)(struct gether *);
+ void (*close)(struct gether *);
+};
+
+#define DEFAULT_FILTER (USB_CDC_PACKET_TYPE_BROADCAST \
+ |USB_CDC_PACKET_TYPE_ALL_MULTICAST \
+ |USB_CDC_PACKET_TYPE_PROMISCUOUS \
+ |USB_CDC_PACKET_TYPE_DIRECTED)
+
+
+/* netdev setup/teardown as directed by the gadget driver */
+int gether_setup(struct usb_gadget *g, u8 ethaddr[ETH_ALEN]);
+void gether_cleanup(void);
+
+/* connect/disconnect is handled by individual functions */
+struct net_device *gether_connect(struct gether *);
+void gether_disconnect(struct gether *);
+
+/* Some controllers can't support CDC Ethernet (ECM) ... */
+static inline bool can_support_ecm(struct usb_gadget *gadget)
+{
+ if (!gadget_supports_altsettings(gadget))
+ return false;
+
+ /* SA1100 can do ECM, *without* status endpoint ... but we'll
+ * only use it in non-ECM mode for backwards compatibility
+ * (and since we currently require a status endpoint)
+ */
+ if (gadget_is_sa1100(gadget))
+ return false;
+
+ /* Everything else is *presumably* fine ... but this is a bit
+ * chancy, so be **CERTAIN** there are no hardware issues with
+ * your controller. Add it above if it can't handle CDC.
+ */
+ return true;
+}
+
+/* each configuration may bind one instance of an ethernet link */
+int geth_bind_config(struct usb_configuration *c, u8 ethaddr[ETH_ALEN]);
+int ecm_bind_config(struct usb_configuration *c, u8 ethaddr[ETH_ALEN]);
+
+#ifdef CONFIG_USB_ETH_RNDIS
+
+int rndis_bind_config(struct usb_configuration *c, u8 ethaddr[ETH_ALEN]);
+
+#else
+
+static inline int
+rndis_bind_config(struct usb_configuration *c, u8 ethaddr[ETH_ALEN])
+{
+ return 0;
+}
+
+#endif
+
+#endif /* __U_ETHER_H */
diff --git a/drivers/usb/gadget/u_serial.c b/drivers/usb/gadget/u_serial.c
new file mode 100644
index 00000000000..abf9505d3a7
--- /dev/null
+++ b/drivers/usb/gadget/u_serial.c
@@ -0,0 +1,1246 @@
+/*
+ * u_serial.c - utilities for USB gadget "serial port"/TTY support
+ *
+ * Copyright (C) 2003 Al Borchers (alborchers@steinerpoint.com)
+ * Copyright (C) 2008 David Brownell
+ * Copyright (C) 2008 by Nokia Corporation
+ *
+ * This code also borrows from usbserial.c, which is
+ * Copyright (C) 1999 - 2002 Greg Kroah-Hartman (greg@kroah.com)
+ * Copyright (C) 2000 Peter Berger (pberger@brimson.com)
+ * Copyright (C) 2000 Al Borchers (alborchers@steinerpoint.com)
+ *
+ * This software is distributed under the terms of the GNU General
+ * Public License ("GPL") as published by the Free Software Foundation,
+ * either version 2 of that License or (at your option) any later version.
+ */
+
+/* #define VERBOSE_DEBUG */
+
+#include <linux/kernel.h>
+#include <linux/interrupt.h>
+#include <linux/device.h>
+#include <linux/delay.h>
+#include <linux/tty.h>
+#include <linux/tty_flip.h>
+
+#include "u_serial.h"
+
+
+/*
+ * This component encapsulates the TTY layer glue needed to provide basic
+ * "serial port" functionality through the USB gadget stack. Each such
+ * port is exposed through a /dev/ttyGS* node.
+ *
+ * After initialization (gserial_setup), these TTY port devices stay
+ * available until they are removed (gserial_cleanup). Each one may be
+ * connected to a USB function (gserial_connect), or disconnected (with
+ * gserial_disconnect) when the USB host issues a config change event.
+ * Data can only flow when the port is connected to the host.
+ *
+ * A given TTY port can be made available in multiple configurations.
+ * For example, each one might expose a ttyGS0 node which provides a
+ * login application. In one case that might use CDC ACM interface 0,
+ * while another configuration might use interface 3 for that. The
+ * work to handle that (including descriptor management) is not part
+ * of this component.
+ *
+ * Configurations may expose more than one TTY port. For example, if
+ * ttyGS0 provides login service, then ttyGS1 might provide dialer access
+ * for a telephone or fax link. And ttyGS2 might be something that just
+ * needs a simple byte stream interface for some messaging protocol that
+ * is managed in userspace ... OBEX, PTP, and MTP have been mentioned.
+ */
+
+/*
+ * gserial is the lifecycle interface, used by USB functions
+ * gs_port is the I/O nexus, used by the tty driver
+ * tty_struct links to the tty/filesystem framework
+ *
+ * gserial <---> gs_port ... links will be null when the USB link is
+ * inactive; managed by gserial_{connect,disconnect}().
+ * gserial->ioport == usb_ep->driver_data ... gs_port
+ * gs_port->port_usb ... gserial
+ *
+ * gs_port <---> tty_struct ... links will be null when the TTY file
+ * isn't opened; managed by gs_open()/gs_close()
+ * gserial->port_tty ... tty_struct
+ * tty_struct->driver_data ... gserial
+ */
+
+/* RX and TX queues can buffer QUEUE_SIZE packets before they hit the
+ * next layer of buffering. For TX that's a circular buffer; for RX
+ * consider it a NOP. A third layer is provided by the TTY code.
+ */
+#define QUEUE_SIZE 16
+#define WRITE_BUF_SIZE 8192 /* TX only */
+
+/* circular buffer */
+struct gs_buf {
+ unsigned buf_size;
+ char *buf_buf;
+ char *buf_get;
+ char *buf_put;
+};
+
+/*
+ * The port structure holds info for each port, one for each minor number
+ * (and thus for each /dev/ node).
+ */
+struct gs_port {
+ spinlock_t port_lock; /* guard port_* access */
+
+ struct gserial *port_usb;
+ struct tty_struct *port_tty;
+
+ unsigned open_count;
+ bool openclose; /* open/close in progress */
+ u8 port_num;
+
+ wait_queue_head_t close_wait; /* wait for last close */
+
+ struct list_head read_pool;
+ struct tasklet_struct push;
+
+ struct list_head write_pool;
+ struct gs_buf port_write_buf;
+ wait_queue_head_t drain_wait; /* wait while writes drain */
+
+ /* REVISIT this state ... */
+ struct usb_cdc_line_coding port_line_coding; /* 8-N-1 etc */
+};
+
+/* increase N_PORTS if you need more */
+#define N_PORTS 4
+static struct portmaster {
+ struct mutex lock; /* protect open/close */
+ struct gs_port *port;
+} ports[N_PORTS];
+static unsigned n_ports;
+
+#define GS_CLOSE_TIMEOUT 15 /* seconds */
+
+
+
+#ifdef VERBOSE_DEBUG
+#define pr_vdebug(fmt, arg...) \
+ pr_debug(fmt, ##arg)
+#else
+#define pr_vdebug(fmt, arg...) \
+ ({ if (0) pr_debug(fmt, ##arg); })
+#endif
+
+/*-------------------------------------------------------------------------*/
+
+/* Circular Buffer */
+
+/*
+ * gs_buf_alloc
+ *
+ * Allocate a circular buffer and all associated memory.
+ */
+static int gs_buf_alloc(struct gs_buf *gb, unsigned size)
+{
+ gb->buf_buf = kmalloc(size, GFP_KERNEL);
+ if (gb->buf_buf == NULL)
+ return -ENOMEM;
+
+ gb->buf_size = size;
+ gb->buf_put = gb->buf_buf;
+ gb->buf_get = gb->buf_buf;
+
+ return 0;
+}
+
+/*
+ * gs_buf_free
+ *
+ * Free the buffer and all associated memory.
+ */
+static void gs_buf_free(struct gs_buf *gb)
+{
+ kfree(gb->buf_buf);
+ gb->buf_buf = NULL;
+}
+
+/*
+ * gs_buf_clear
+ *
+ * Clear out all data in the circular buffer.
+ */
+static void gs_buf_clear(struct gs_buf *gb)
+{
+ gb->buf_get = gb->buf_put;
+ /* equivalent to a get of all data available */
+}
+
+/*
+ * gs_buf_data_avail
+ *
+ * Return the number of bytes of data available in the circular
+ * buffer.
+ */
+static unsigned gs_buf_data_avail(struct gs_buf *gb)
+{
+ return (gb->buf_size + gb->buf_put - gb->buf_get) % gb->buf_size;
+}
+
+/*
+ * gs_buf_space_avail
+ *
+ * Return the number of bytes of space available in the circular
+ * buffer.
+ */
+static unsigned gs_buf_space_avail(struct gs_buf *gb)
+{
+ return (gb->buf_size + gb->buf_get - gb->buf_put - 1) % gb->buf_size;
+}
+
+/*
+ * gs_buf_put
+ *
+ * Copy data data from a user buffer and put it into the circular buffer.
+ * Restrict to the amount of space available.
+ *
+ * Return the number of bytes copied.
+ */
+static unsigned
+gs_buf_put(struct gs_buf *gb, const char *buf, unsigned count)
+{
+ unsigned len;
+
+ len = gs_buf_space_avail(gb);
+ if (count > len)
+ count = len;
+
+ if (count == 0)
+ return 0;
+
+ len = gb->buf_buf + gb->buf_size - gb->buf_put;
+ if (count > len) {
+ memcpy(gb->buf_put, buf, len);
+ memcpy(gb->buf_buf, buf+len, count - len);
+ gb->buf_put = gb->buf_buf + count - len;
+ } else {
+ memcpy(gb->buf_put, buf, count);
+ if (count < len)
+ gb->buf_put += count;
+ else /* count == len */
+ gb->buf_put = gb->buf_buf;
+ }
+
+ return count;
+}
+
+/*
+ * gs_buf_get
+ *
+ * Get data from the circular buffer and copy to the given buffer.
+ * Restrict to the amount of data available.
+ *
+ * Return the number of bytes copied.
+ */
+static unsigned
+gs_buf_get(struct gs_buf *gb, char *buf, unsigned count)
+{
+ unsigned len;
+
+ len = gs_buf_data_avail(gb);
+ if (count > len)
+ count = len;
+
+ if (count == 0)
+ return 0;
+
+ len = gb->buf_buf + gb->buf_size - gb->buf_get;
+ if (count > len) {
+ memcpy(buf, gb->buf_get, len);
+ memcpy(buf+len, gb->buf_buf, count - len);
+ gb->buf_get = gb->buf_buf + count - len;
+ } else {
+ memcpy(buf, gb->buf_get, count);
+ if (count < len)
+ gb->buf_get += count;
+ else /* count == len */
+ gb->buf_get = gb->buf_buf;
+ }
+
+ return count;
+}
+
+/*-------------------------------------------------------------------------*/
+
+/* I/O glue between TTY (upper) and USB function (lower) driver layers */
+
+/*
+ * gs_alloc_req
+ *
+ * Allocate a usb_request and its buffer. Returns a pointer to the
+ * usb_request or NULL if there is an error.
+ */
+static struct usb_request *
+gs_alloc_req(struct usb_ep *ep, unsigned len, gfp_t kmalloc_flags)
+{
+ struct usb_request *req;
+
+ req = usb_ep_alloc_request(ep, kmalloc_flags);
+
+ if (req != NULL) {
+ req->length = len;
+ req->buf = kmalloc(len, kmalloc_flags);
+ if (req->buf == NULL) {
+ usb_ep_free_request(ep, req);
+ return NULL;
+ }
+ }
+
+ return req;
+}
+
+/*
+ * gs_free_req
+ *
+ * Free a usb_request and its buffer.
+ */
+static void gs_free_req(struct usb_ep *ep, struct usb_request *req)
+{
+ kfree(req->buf);
+ usb_ep_free_request(ep, req);
+}
+
+/*
+ * gs_send_packet
+ *
+ * If there is data to send, a packet is built in the given
+ * buffer and the size is returned. If there is no data to
+ * send, 0 is returned.
+ *
+ * Called with port_lock held.
+ */
+static unsigned
+gs_send_packet(struct gs_port *port, char *packet, unsigned size)
+{
+ unsigned len;
+
+ len = gs_buf_data_avail(&port->port_write_buf);
+ if (len < size)
+ size = len;
+ if (size != 0)
+ size = gs_buf_get(&port->port_write_buf, packet, size);
+ return size;
+}
+
+/*
+ * gs_start_tx
+ *
+ * This function finds available write requests, calls
+ * gs_send_packet to fill these packets with data, and
+ * continues until either there are no more write requests
+ * available or no more data to send. This function is
+ * run whenever data arrives or write requests are available.
+ *
+ * Context: caller owns port_lock; port_usb is non-null.
+ */
+static int gs_start_tx(struct gs_port *port)
+/*
+__releases(&port->port_lock)
+__acquires(&port->port_lock)
+*/
+{
+ struct list_head *pool = &port->write_pool;
+ struct usb_ep *in = port->port_usb->in;
+ int status = 0;
+ bool do_tty_wake = false;
+
+ while (!list_empty(pool)) {
+ struct usb_request *req;
+ int len;
+
+ req = list_entry(pool->next, struct usb_request, list);
+ len = gs_send_packet(port, req->buf, in->maxpacket);
+ if (len == 0) {
+ wake_up_interruptible(&port->drain_wait);
+ break;
+ }
+ do_tty_wake = true;
+
+ req->length = len;
+ list_del(&req->list);
+
+#ifdef VERBOSE_DEBUG
+ pr_debug("%s: %s, len=%d, 0x%02x 0x%02x 0x%02x ...\n",
+ __func__, in->name, len, *((u8 *)req->buf),
+ *((u8 *)req->buf+1), *((u8 *)req->buf+2));
+#endif
+
+ /* Drop lock while we call out of driver; completions
+ * could be issued while we do so. Disconnection may
+ * happen too; maybe immediately before we queue this!
+ *
+ * NOTE that we may keep sending data for a while after
+ * the TTY closed (dev->ioport->port_tty is NULL).
+ */
+ spin_unlock(&port->port_lock);
+ status = usb_ep_queue(in, req, GFP_ATOMIC);
+ spin_lock(&port->port_lock);
+
+ if (status) {
+ pr_debug("%s: %s %s err %d\n",
+ __func__, "queue", in->name, status);
+ list_add(&req->list, pool);
+ break;
+ }
+
+ /* abort immediately after disconnect */
+ if (!port->port_usb)
+ break;
+ }
+
+ if (do_tty_wake && port->port_tty)
+ tty_wakeup(port->port_tty);
+ return status;
+}
+
+static void gs_rx_push(unsigned long _port)
+{
+ struct gs_port *port = (void *)_port;
+ struct tty_struct *tty = port->port_tty;
+
+ /* With low_latency, tty_flip_buffer_push() doesn't put its
+ * real work through a workqueue, so the ldisc has a better
+ * chance to keep up with peak USB data rates.
+ */
+ if (tty) {
+ tty_flip_buffer_push(tty);
+ wake_up_interruptible(&tty->read_wait);
+ }
+}
+
+/*
+ * gs_recv_packet
+ *
+ * Called for each USB packet received. Reads the packet
+ * header and stuffs the data in the appropriate tty buffer.
+ * Returns 0 if successful, or a negative error number.
+ *
+ * Called during USB completion routine, on interrupt time.
+ * With port_lock.
+ */
+static int gs_recv_packet(struct gs_port *port, char *packet, unsigned size)
+{
+ unsigned len;
+ struct tty_struct *tty;
+
+ /* I/O completions can continue for a while after close(), until the
+ * request queue empties. Just discard any data we receive, until
+ * something reopens this TTY ... as if there were no HW flow control.
+ */
+ tty = port->port_tty;
+ if (tty == NULL) {
+ pr_vdebug("%s: ttyGS%d, after close\n",
+ __func__, port->port_num);
+ return -EIO;
+ }
+
+ len = tty_insert_flip_string(tty, packet, size);
+ if (len > 0)
+ tasklet_schedule(&port->push);
+ if (len < size)
+ pr_debug("%s: ttyGS%d, drop %d bytes\n",
+ __func__, port->port_num, size - len);
+ return 0;
+}
+
+/*
+ * Context: caller owns port_lock, and port_usb is set
+ */
+static unsigned gs_start_rx(struct gs_port *port)
+/*
+__releases(&port->port_lock)
+__acquires(&port->port_lock)
+*/
+{
+ struct list_head *pool = &port->read_pool;
+ struct usb_ep *out = port->port_usb->out;
+ unsigned started = 0;
+
+ while (!list_empty(pool)) {
+ struct usb_request *req;
+ int status;
+ struct tty_struct *tty;
+
+ /* no more rx if closed or throttled */
+ tty = port->port_tty;
+ if (!tty || test_bit(TTY_THROTTLED, &tty->flags))
+ break;
+
+ req = list_entry(pool->next, struct usb_request, list);
+ list_del(&req->list);
+ req->length = out->maxpacket;
+
+ /* drop lock while we call out; the controller driver
+ * may need to call us back (e.g. for disconnect)
+ */
+ spin_unlock(&port->port_lock);
+ status = usb_ep_queue(out, req, GFP_ATOMIC);
+ spin_lock(&port->port_lock);
+
+ if (status) {
+ pr_debug("%s: %s %s err %d\n",
+ __func__, "queue", out->name, status);
+ list_add(&req->list, pool);
+ break;
+ }
+ started++;
+
+ /* abort immediately after disconnect */
+ if (!port->port_usb)
+ break;
+ }
+ return started;
+}
+
+static void gs_read_complete(struct usb_ep *ep, struct usb_request *req)
+{
+ int status;
+ struct gs_port *port = ep->driver_data;
+
+ spin_lock(&port->port_lock);
+ list_add(&req->list, &port->read_pool);
+
+ switch (req->status) {
+ case 0:
+ /* normal completion */
+ status = gs_recv_packet(port, req->buf, req->actual);
+ if (status && status != -EIO)
+ pr_debug("%s: %s %s err %d\n",
+ __func__, "recv", ep->name, status);
+ gs_start_rx(port);
+ break;
+
+ case -ESHUTDOWN:
+ /* disconnect */
+ pr_vdebug("%s: %s shutdown\n", __func__, ep->name);
+ break;
+
+ default:
+ /* presumably a transient fault */
+ pr_warning("%s: unexpected %s status %d\n",
+ __func__, ep->name, req->status);
+ gs_start_rx(port);
+ break;
+ }
+ spin_unlock(&port->port_lock);
+}
+
+static void gs_write_complete(struct usb_ep *ep, struct usb_request *req)
+{
+ struct gs_port *port = ep->driver_data;
+
+ spin_lock(&port->port_lock);
+ list_add(&req->list, &port->write_pool);
+
+ switch (req->status) {
+ default:
+ /* presumably a transient fault */
+ pr_warning("%s: unexpected %s status %d\n",
+ __func__, ep->name, req->status);
+ /* FALL THROUGH */
+ case 0:
+ /* normal completion */
+ gs_start_tx(port);
+ break;
+
+ case -ESHUTDOWN:
+ /* disconnect */
+ pr_vdebug("%s: %s shutdown\n", __func__, ep->name);
+ break;
+ }
+
+ spin_unlock(&port->port_lock);
+}
+
+static void gs_free_requests(struct usb_ep *ep, struct list_head *head)
+{
+ struct usb_request *req;
+
+ while (!list_empty(head)) {
+ req = list_entry(head->next, struct usb_request, list);
+ list_del(&req->list);
+ gs_free_req(ep, req);
+ }
+}
+
+static int gs_alloc_requests(struct usb_ep *ep, struct list_head *head,
+ void (*fn)(struct usb_ep *, struct usb_request *))
+{
+ int i;
+ struct usb_request *req;
+
+ /* Pre-allocate up to QUEUE_SIZE transfers, but if we can't
+ * do quite that many this time, don't fail ... we just won't
+ * be as speedy as we might otherwise be.
+ */
+ for (i = 0; i < QUEUE_SIZE; i++) {
+ req = gs_alloc_req(ep, ep->maxpacket, GFP_ATOMIC);
+ if (!req)
+ return list_empty(head) ? -ENOMEM : 0;
+ req->complete = fn;
+ list_add_tail(&req->list, head);
+ }
+ return 0;
+}
+
+/**
+ * gs_start_io - start USB I/O streams
+ * @dev: encapsulates endpoints to use
+ * Context: holding port_lock; port_tty and port_usb are non-null
+ *
+ * We only start I/O when something is connected to both sides of
+ * this port. If nothing is listening on the host side, we may
+ * be pointlessly filling up our TX buffers and FIFO.
+ */
+static int gs_start_io(struct gs_port *port)
+{
+ struct list_head *head = &port->read_pool;
+ struct usb_ep *ep = port->port_usb->out;
+ int status;
+ unsigned started;
+
+ /* Allocate RX and TX I/O buffers. We can't easily do this much
+ * earlier (with GFP_KERNEL) because the requests are coupled to
+ * endpoints, as are the packet sizes we'll be using. Different
+ * configurations may use different endpoints with a given port;
+ * and high speed vs full speed changes packet sizes too.
+ */
+ status = gs_alloc_requests(ep, head, gs_read_complete);
+ if (status)
+ return status;
+
+ status = gs_alloc_requests(port->port_usb->in, &port->write_pool,
+ gs_write_complete);
+ if (status) {
+ gs_free_requests(ep, head);
+ return status;
+ }
+
+ /* queue read requests */
+ started = gs_start_rx(port);
+
+ /* unblock any pending writes into our circular buffer */
+ if (started) {
+ tty_wakeup(port->port_tty);
+ } else {
+ gs_free_requests(ep, head);
+ gs_free_requests(port->port_usb->in, &port->write_pool);
+ }
+
+ return started ? 0 : status;
+}
+
+/*-------------------------------------------------------------------------*/
+
+/* TTY Driver */
+
+/*
+ * gs_open sets up the link between a gs_port and its associated TTY.
+ * That link is broken *only* by TTY close(), and all driver methods
+ * know that.
+ */
+static int gs_open(struct tty_struct *tty, struct file *file)
+{
+ int port_num = tty->index;
+ struct gs_port *port;
+ int status;
+
+ if (port_num < 0 || port_num >= n_ports)
+ return -ENXIO;
+
+ do {
+ mutex_lock(&ports[port_num].lock);
+ port = ports[port_num].port;
+ if (!port)
+ status = -ENODEV;
+ else {
+ spin_lock_irq(&port->port_lock);
+
+ /* already open? Great. */
+ if (port->open_count) {
+ status = 0;
+ port->open_count++;
+
+ /* currently opening/closing? wait ... */
+ } else if (port->openclose) {
+ status = -EBUSY;
+
+ /* ... else we do the work */
+ } else {
+ status = -EAGAIN;
+ port->openclose = true;
+ }
+ spin_unlock_irq(&port->port_lock);
+ }
+ mutex_unlock(&ports[port_num].lock);
+
+ switch (status) {
+ default:
+ /* fully handled */
+ return status;
+ case -EAGAIN:
+ /* must do the work */
+ break;
+ case -EBUSY:
+ /* wait for EAGAIN task to finish */
+ msleep(1);
+ /* REVISIT could have a waitchannel here, if
+ * concurrent open performance is important
+ */
+ break;
+ }
+ } while (status != -EAGAIN);
+
+ /* Do the "real open" */
+ spin_lock_irq(&port->port_lock);
+
+ /* allocate circular buffer on first open */
+ if (port->port_write_buf.buf_buf == NULL) {
+
+ spin_unlock_irq(&port->port_lock);
+ status = gs_buf_alloc(&port->port_write_buf, WRITE_BUF_SIZE);
+ spin_lock_irq(&port->port_lock);
+
+ if (status) {
+ pr_debug("gs_open: ttyGS%d (%p,%p) no buffer\n",
+ port->port_num, tty, file);
+ port->openclose = false;
+ goto exit_unlock_port;
+ }
+ }
+
+ /* REVISIT if REMOVED (ports[].port NULL), abort the open
+ * to let rmmod work faster (but this way isn't wrong).
+ */
+
+ /* REVISIT maybe wait for "carrier detect" */
+
+ tty->driver_data = port;
+ port->port_tty = tty;
+
+ port->open_count = 1;
+ port->openclose = false;
+
+ /* low_latency means ldiscs work in tasklet context, without
+ * needing a workqueue schedule ... easier to keep up.
+ */
+ tty->low_latency = 1;
+
+ /* if connected, start the I/O stream */
+ if (port->port_usb) {
+ pr_debug("gs_open: start ttyGS%d\n", port->port_num);
+ gs_start_io(port);
+
+ /* REVISIT for ACM, issue "network connected" event */
+ }
+
+ pr_debug("gs_open: ttyGS%d (%p,%p)\n", port->port_num, tty, file);
+
+ status = 0;
+
+exit_unlock_port:
+ spin_unlock_irq(&port->port_lock);
+ return status;
+}
+
+static int gs_writes_finished(struct gs_port *p)
+{
+ int cond;
+
+ /* return true on disconnect or empty buffer */
+ spin_lock_irq(&p->port_lock);
+ cond = (p->port_usb == NULL) || !gs_buf_data_avail(&p->port_write_buf);
+ spin_unlock_irq(&p->port_lock);
+
+ return cond;
+}
+
+static void gs_close(struct tty_struct *tty, struct file *file)
+{
+ struct gs_port *port = tty->driver_data;
+
+ spin_lock_irq(&port->port_lock);
+
+ if (port->open_count != 1) {
+ if (port->open_count == 0)
+ WARN_ON(1);
+ else
+ --port->open_count;
+ goto exit;
+ }
+
+ pr_debug("gs_close: ttyGS%d (%p,%p) ...\n", port->port_num, tty, file);
+
+ /* mark port as closing but in use; we can drop port lock
+ * and sleep if necessary
+ */
+ port->openclose = true;
+ port->open_count = 0;
+
+ if (port->port_usb)
+ /* REVISIT for ACM, issue "network disconnected" event */;
+
+ /* wait for circular write buffer to drain, disconnect, or at
+ * most GS_CLOSE_TIMEOUT seconds; then discard the rest
+ */
+ if (gs_buf_data_avail(&port->port_write_buf) > 0
+ && port->port_usb) {
+ spin_unlock_irq(&port->port_lock);
+ wait_event_interruptible_timeout(port->drain_wait,
+ gs_writes_finished(port),
+ GS_CLOSE_TIMEOUT * HZ);
+ spin_lock_irq(&port->port_lock);
+ }
+
+ /* Iff we're disconnected, there can be no I/O in flight so it's
+ * ok to free the circular buffer; else just scrub it. And don't
+ * let the push tasklet fire again until we're re-opened.
+ */
+ if (port->port_usb == NULL)
+ gs_buf_free(&port->port_write_buf);
+ else
+ gs_buf_clear(&port->port_write_buf);
+
+ tasklet_kill(&port->push);
+
+ tty->driver_data = NULL;
+ port->port_tty = NULL;
+
+ port->openclose = false;
+
+ pr_debug("gs_close: ttyGS%d (%p,%p) done!\n",
+ port->port_num, tty, file);
+
+ wake_up_interruptible(&port->close_wait);
+exit:
+ spin_unlock_irq(&port->port_lock);
+}
+
+static int gs_write(struct tty_struct *tty, const unsigned char *buf, int count)
+{
+ struct gs_port *port = tty->driver_data;
+ unsigned long flags;
+ int status;
+
+ pr_vdebug("gs_write: ttyGS%d (%p) writing %d bytes\n",
+ port->port_num, tty, count);
+
+ spin_lock_irqsave(&port->port_lock, flags);
+ if (count)
+ count = gs_buf_put(&port->port_write_buf, buf, count);
+ /* treat count == 0 as flush_chars() */
+ if (port->port_usb)
+ status = gs_start_tx(port);
+ spin_unlock_irqrestore(&port->port_lock, flags);
+
+ return count;
+}
+
+static int gs_put_char(struct tty_struct *tty, unsigned char ch)
+{
+ struct gs_port *port = tty->driver_data;
+ unsigned long flags;
+ int status;
+
+ pr_vdebug("gs_put_char: (%d,%p) char=0x%x, called from %p\n",
+ port->port_num, tty, ch, __builtin_return_address(0));
+
+ spin_lock_irqsave(&port->port_lock, flags);
+ status = gs_buf_put(&port->port_write_buf, &ch, 1);
+ spin_unlock_irqrestore(&port->port_lock, flags);
+
+ return status;
+}
+
+static void gs_flush_chars(struct tty_struct *tty)
+{
+ struct gs_port *port = tty->driver_data;
+ unsigned long flags;
+
+ pr_vdebug("gs_flush_chars: (%d,%p)\n", port->port_num, tty);
+
+ spin_lock_irqsave(&port->port_lock, flags);
+ if (port->port_usb)
+ gs_start_tx(port);
+ spin_unlock_irqrestore(&port->port_lock, flags);
+}
+
+static int gs_write_room(struct tty_struct *tty)
+{
+ struct gs_port *port = tty->driver_data;
+ unsigned long flags;
+ int room = 0;
+
+ spin_lock_irqsave(&port->port_lock, flags);
+ if (port->port_usb)
+ room = gs_buf_space_avail(&port->port_write_buf);
+ spin_unlock_irqrestore(&port->port_lock, flags);
+
+ pr_vdebug("gs_write_room: (%d,%p) room=%d\n",
+ port->port_num, tty, room);
+
+ return room;
+}
+
+static int gs_chars_in_buffer(struct tty_struct *tty)
+{
+ struct gs_port *port = tty->driver_data;
+ unsigned long flags;
+ int chars = 0;
+
+ spin_lock_irqsave(&port->port_lock, flags);
+ chars = gs_buf_data_avail(&port->port_write_buf);
+ spin_unlock_irqrestore(&port->port_lock, flags);
+
+ pr_vdebug("gs_chars_in_buffer: (%d,%p) chars=%d\n",
+ port->port_num, tty, chars);
+
+ return chars;
+}
+
+/* undo side effects of setting TTY_THROTTLED */
+static void gs_unthrottle(struct tty_struct *tty)
+{
+ struct gs_port *port = tty->driver_data;
+ unsigned long flags;
+ unsigned started = 0;
+
+ spin_lock_irqsave(&port->port_lock, flags);
+ if (port->port_usb)
+ started = gs_start_rx(port);
+ spin_unlock_irqrestore(&port->port_lock, flags);
+
+ pr_vdebug("gs_unthrottle: ttyGS%d, %d packets\n",
+ port->port_num, started);
+}
+
+static const struct tty_operations gs_tty_ops = {
+ .open = gs_open,
+ .close = gs_close,
+ .write = gs_write,
+ .put_char = gs_put_char,
+ .flush_chars = gs_flush_chars,
+ .write_room = gs_write_room,
+ .chars_in_buffer = gs_chars_in_buffer,
+ .unthrottle = gs_unthrottle,
+};
+
+/*-------------------------------------------------------------------------*/
+
+static struct tty_driver *gs_tty_driver;
+
+static int __init
+gs_port_alloc(unsigned port_num, struct usb_cdc_line_coding *coding)
+{
+ struct gs_port *port;
+
+ port = kzalloc(sizeof(struct gs_port), GFP_KERNEL);
+ if (port == NULL)
+ return -ENOMEM;
+
+ spin_lock_init(&port->port_lock);
+ init_waitqueue_head(&port->close_wait);
+ init_waitqueue_head(&port->drain_wait);
+
+ tasklet_init(&port->push, gs_rx_push, (unsigned long) port);
+
+ INIT_LIST_HEAD(&port->read_pool);
+ INIT_LIST_HEAD(&port->write_pool);
+
+ port->port_num = port_num;
+ port->port_line_coding = *coding;
+
+ ports[port_num].port = port;
+
+ return 0;
+}
+
+/**
+ * gserial_setup - initialize TTY driver for one or more ports
+ * @g: gadget to associate with these ports
+ * @count: how many ports to support
+ * Context: may sleep
+ *
+ * The TTY stack needs to know in advance how many devices it should
+ * plan to manage. Use this call to set up the ports you will be
+ * exporting through USB. Later, connect them to functions based
+ * on what configuration is activated by the USB host; and disconnect
+ * them as appropriate.
+ *
+ * An example would be a two-configuration device in which both
+ * configurations expose port 0, but through different functions.
+ * One configuration could even expose port 1 while the other
+ * one doesn't.
+ *
+ * Returns negative errno or zero.
+ */
+int __init gserial_setup(struct usb_gadget *g, unsigned count)
+{
+ unsigned i;
+ struct usb_cdc_line_coding coding;
+ int status;
+
+ if (count == 0 || count > N_PORTS)
+ return -EINVAL;
+
+ gs_tty_driver = alloc_tty_driver(count);
+ if (!gs_tty_driver)
+ return -ENOMEM;
+
+ gs_tty_driver->owner = THIS_MODULE;
+ gs_tty_driver->driver_name = "g_serial";
+ gs_tty_driver->name = "ttyGS";
+ /* uses dynamically assigned dev_t values */
+
+ gs_tty_driver->type = TTY_DRIVER_TYPE_SERIAL;
+ gs_tty_driver->subtype = SERIAL_TYPE_NORMAL;
+ gs_tty_driver->flags = TTY_DRIVER_REAL_RAW | TTY_DRIVER_DYNAMIC_DEV;
+ gs_tty_driver->init_termios = tty_std_termios;
+
+ /* 9600-8-N-1 ... matches defaults expected by "usbser.sys" on
+ * MS-Windows. Otherwise, most of these flags shouldn't affect
+ * anything unless we were to actually hook up to a serial line.
+ */
+ gs_tty_driver->init_termios.c_cflag =
+ B9600 | CS8 | CREAD | HUPCL | CLOCAL;
+ gs_tty_driver->init_termios.c_ispeed = 9600;
+ gs_tty_driver->init_termios.c_ospeed = 9600;
+
+ coding.dwDTERate = __constant_cpu_to_le32(9600);
+ coding.bCharFormat = 8;
+ coding.bParityType = USB_CDC_NO_PARITY;
+ coding.bDataBits = USB_CDC_1_STOP_BITS;
+
+ tty_set_operations(gs_tty_driver, &gs_tty_ops);
+
+ /* make devices be openable */
+ for (i = 0; i < count; i++) {
+ mutex_init(&ports[i].lock);
+ status = gs_port_alloc(i, &coding);
+ if (status) {
+ count = i;
+ goto fail;
+ }
+ }
+ n_ports = count;
+
+ /* export the driver ... */
+ status = tty_register_driver(gs_tty_driver);
+ if (status) {
+ put_tty_driver(gs_tty_driver);
+ pr_err("%s: cannot register, err %d\n",
+ __func__, status);
+ goto fail;
+ }
+
+ /* ... and sysfs class devices, so mdev/udev make /dev/ttyGS* */
+ for (i = 0; i < count; i++) {
+ struct device *tty_dev;
+
+ tty_dev = tty_register_device(gs_tty_driver, i, &g->dev);
+ if (IS_ERR(tty_dev))
+ pr_warning("%s: no classdev for port %d, err %ld\n",
+ __func__, i, PTR_ERR(tty_dev));
+ }
+
+ pr_debug("%s: registered %d ttyGS* device%s\n", __func__,
+ count, (count == 1) ? "" : "s");
+
+ return status;
+fail:
+ while (count--)
+ kfree(ports[count].port);
+ put_tty_driver(gs_tty_driver);
+ gs_tty_driver = NULL;
+ return status;
+}
+
+static int gs_closed(struct gs_port *port)
+{
+ int cond;
+
+ spin_lock_irq(&port->port_lock);
+ cond = (port->open_count == 0) && !port->openclose;
+ spin_unlock_irq(&port->port_lock);
+ return cond;
+}
+
+/**
+ * gserial_cleanup - remove TTY-over-USB driver and devices
+ * Context: may sleep
+ *
+ * This is called to free all resources allocated by @gserial_setup().
+ * Accordingly, it may need to wait until some open /dev/ files have
+ * closed.
+ *
+ * The caller must have issued @gserial_disconnect() for any ports
+ * that had previously been connected, so that there is never any
+ * I/O pending when it's called.
+ */
+void gserial_cleanup(void)
+{
+ unsigned i;
+ struct gs_port *port;
+
+ if (!gs_tty_driver)
+ return;
+
+ /* start sysfs and /dev/ttyGS* node removal */
+ for (i = 0; i < n_ports; i++)
+ tty_unregister_device(gs_tty_driver, i);
+
+ for (i = 0; i < n_ports; i++) {
+ /* prevent new opens */
+ mutex_lock(&ports[i].lock);
+ port = ports[i].port;
+ ports[i].port = NULL;
+ mutex_unlock(&ports[i].lock);
+
+ /* wait for old opens to finish */
+ wait_event(port->close_wait, gs_closed(port));
+
+ WARN_ON(port->port_usb != NULL);
+
+ kfree(port);
+ }
+ n_ports = 0;
+
+ tty_unregister_driver(gs_tty_driver);
+ gs_tty_driver = NULL;
+
+ pr_debug("%s: cleaned up ttyGS* support\n", __func__);
+}
+
+/**
+ * gserial_connect - notify TTY I/O glue that USB link is active
+ * @gser: the function, set up with endpoints and descriptors
+ * @port_num: which port is active
+ * Context: any (usually from irq)
+ *
+ * This is called activate endpoints and let the TTY layer know that
+ * the connection is active ... not unlike "carrier detect". It won't
+ * necessarily start I/O queues; unless the TTY is held open by any
+ * task, there would be no point. However, the endpoints will be
+ * activated so the USB host can perform I/O, subject to basic USB
+ * hardware flow control.
+ *
+ * Caller needs to have set up the endpoints and USB function in @dev
+ * before calling this, as well as the appropriate (speed-specific)
+ * endpoint descriptors, and also have set up the TTY driver by calling
+ * @gserial_setup().
+ *
+ * Returns negative errno or zero.
+ * On success, ep->driver_data will be overwritten.
+ */
+int gserial_connect(struct gserial *gser, u8 port_num)
+{
+ struct gs_port *port;
+ unsigned long flags;
+ int status;
+
+ if (!gs_tty_driver || port_num >= n_ports)
+ return -ENXIO;
+
+ /* we "know" gserial_cleanup() hasn't been called */
+ port = ports[port_num].port;
+
+ /* activate the endpoints */
+ status = usb_ep_enable(gser->in, gser->in_desc);
+ if (status < 0)
+ return status;
+ gser->in->driver_data = port;
+
+ status = usb_ep_enable(gser->out, gser->out_desc);
+ if (status < 0)
+ goto fail_out;
+ gser->out->driver_data = port;
+
+ /* then tell the tty glue that I/O can work */
+ spin_lock_irqsave(&port->port_lock, flags);
+ gser->ioport = port;
+ port->port_usb = gser;
+
+ /* REVISIT unclear how best to handle this state...
+ * we don't really couple it with the Linux TTY.
+ */
+ gser->port_line_coding = port->port_line_coding;
+
+ /* REVISIT if waiting on "carrier detect", signal. */
+
+ /* REVISIT for ACM, issue "network connection" status notification:
+ * connected if open_count, else disconnected.
+ */
+
+ /* if it's already open, start I/O */
+ if (port->open_count) {
+ pr_debug("gserial_connect: start ttyGS%d\n", port->port_num);
+ gs_start_io(port);
+ }
+
+ spin_unlock_irqrestore(&port->port_lock, flags);
+
+ return status;
+
+fail_out:
+ usb_ep_disable(gser->in);
+ gser->in->driver_data = NULL;
+ return status;
+}
+
+/**
+ * gserial_disconnect - notify TTY I/O glue that USB link is inactive
+ * @gser: the function, on which gserial_connect() was called
+ * Context: any (usually from irq)
+ *
+ * This is called to deactivate endpoints and let the TTY layer know
+ * that the connection went inactive ... not unlike "hangup".
+ *
+ * On return, the state is as if gserial_connect() had never been called;
+ * there is no active USB I/O on these endpoints.
+ */
+void gserial_disconnect(struct gserial *gser)
+{
+ struct gs_port *port = gser->ioport;
+ unsigned long flags;
+
+ if (!port)
+ return;
+
+ /* tell the TTY glue not to do I/O here any more */
+ spin_lock_irqsave(&port->port_lock, flags);
+
+ /* REVISIT as above: how best to track this? */
+ port->port_line_coding = gser->port_line_coding;
+
+ port->port_usb = NULL;
+ gser->ioport = NULL;
+ if (port->open_count > 0 || port->openclose) {
+ wake_up_interruptible(&port->drain_wait);
+ if (port->port_tty)
+ tty_hangup(port->port_tty);
+ }
+ spin_unlock_irqrestore(&port->port_lock, flags);
+
+ /* disable endpoints, aborting down any active I/O */
+ usb_ep_disable(gser->out);
+ gser->out->driver_data = NULL;
+
+ usb_ep_disable(gser->in);
+ gser->in->driver_data = NULL;
+
+ /* finally, free any unused/unusable I/O buffers */
+ spin_lock_irqsave(&port->port_lock, flags);
+ if (port->open_count == 0 && !port->openclose)
+ gs_buf_free(&port->port_write_buf);
+ gs_free_requests(gser->out, &port->read_pool);
+ gs_free_requests(gser->in, &port->write_pool);
+ spin_unlock_irqrestore(&port->port_lock, flags);
+}
diff --git a/drivers/usb/gadget/u_serial.h b/drivers/usb/gadget/u_serial.h
new file mode 100644
index 00000000000..7b561138f90
--- /dev/null
+++ b/drivers/usb/gadget/u_serial.h
@@ -0,0 +1,58 @@
+/*
+ * u_serial.h - interface to USB gadget "serial port"/TTY utilities
+ *
+ * Copyright (C) 2008 David Brownell
+ * Copyright (C) 2008 by Nokia Corporation
+ *
+ * This software is distributed under the terms of the GNU General
+ * Public License ("GPL") as published by the Free Software Foundation,
+ * either version 2 of that License or (at your option) any later version.
+ */
+
+#ifndef __U_SERIAL_H
+#define __U_SERIAL_H
+
+#include <linux/usb/composite.h>
+#include <linux/usb/cdc.h>
+
+/*
+ * One non-multiplexed "serial" I/O port ... there can be several of these
+ * on any given USB peripheral device, if it provides enough endpoints.
+ *
+ * The "u_serial" utility component exists to do one thing: manage TTY
+ * style I/O using the USB peripheral endpoints listed here, including
+ * hookups to sysfs and /dev for each logical "tty" device.
+ *
+ * REVISIT need TTY --> USB event flow too, so ACM can report open/close
+ * as carrier detect events. Model after ECM. There's more ACM state too.
+ *
+ * REVISIT someday, allow multiplexing several TTYs over these endpoints.
+ */
+struct gserial {
+ struct usb_function func;
+
+ /* port is managed by gserial_{connect,disconnect} */
+ struct gs_port *ioport;
+
+ struct usb_ep *in;
+ struct usb_ep *out;
+ struct usb_endpoint_descriptor *in_desc;
+ struct usb_endpoint_descriptor *out_desc;
+
+ /* REVISIT avoid this CDC-ACM support harder ... */
+ struct usb_cdc_line_coding port_line_coding; /* 9600-8-N-1 etc */
+};
+
+/* port setup/teardown is handled by gadget driver */
+int gserial_setup(struct usb_gadget *g, unsigned n_ports);
+void gserial_cleanup(void);
+
+/* connect/disconnect is handled by individual functions */
+int gserial_connect(struct gserial *, u8 port_num);
+void gserial_disconnect(struct gserial *);
+
+/* functions are bound to configurations by a config or gadget driver */
+int acm_bind_config(struct usb_configuration *c, u8 port_num);
+int gser_bind_config(struct usb_configuration *c, u8 port_num);
+
+#endif /* __U_SERIAL_H */
diff --git a/drivers/usb/gadget/zero.c b/drivers/usb/gadget/zero.c
index fce4924dbbe..aa0bd4f126a 100644
--- a/drivers/usb/gadget/zero.c
+++ b/drivers/usb/gadget/zero.c
@@ -1,8 +1,8 @@
/*
* zero.c -- Gadget Zero, for USB development
*
- * Copyright (C) 2003-2007 David Brownell
- * All rights reserved.
+ * Copyright (C) 2003-2008 David Brownell
+ * Copyright (C) 2008 by Nokia Corporation
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
@@ -30,12 +30,7 @@
*
* It supports two similar configurations. One sinks whatever the usb host
* writes, and in return sources zeroes. The other loops whatever the host
- * writes back, so the host can read it. Module options include:
- *
- * buflen=N default N=4096, buffer size used
- * qlen=N default N=32, how many buffers in the loopback queue
- * loopdefault default false, list loopback config first
- * autoresume=N default N=0, seconds before triggering remote wakeup
+ * writes back, so the host can read it.
*
* Many drivers will only have one configuration, letting them be much
* simpler if they also don't support high speed operation (like this
@@ -47,94 +42,35 @@
* work with low capability USB controllers without four bulk endpoints.
*/
+/*
+ * driver assumes self-powered hardware, and
+ * has no way for users to trigger remote wakeup.
+ */
+
/* #define VERBOSE_DEBUG */
#include <linux/kernel.h>
#include <linux/utsname.h>
#include <linux/device.h>
-#include <linux/usb/ch9.h>
-#include <linux/usb/gadget.h>
-
+#include "g_zero.h"
#include "gadget_chips.h"
/*-------------------------------------------------------------------------*/
-#define DRIVER_VERSION "Earth Day 2008"
+#define DRIVER_VERSION "Cinco de Mayo 2008"
-static const char shortname[] = "zero";
static const char longname[] = "Gadget Zero";
-static const char source_sink[] = "source and sink data";
-static const char loopback[] = "loop input to output";
-
-/*-------------------------------------------------------------------------*/
-
-/*
- * driver assumes self-powered hardware, and
- * has no way for users to trigger remote wakeup.
- *
- * this version autoconfigures as much as possible,
- * which is reasonable for most "bulk-only" drivers.
- */
-static const char *EP_IN_NAME; /* source */
-static const char *EP_OUT_NAME; /* sink */
-
-/*-------------------------------------------------------------------------*/
-
-/* big enough to hold our biggest descriptor */
-#define USB_BUFSIZ 256
-
-struct zero_dev {
- spinlock_t lock;
- struct usb_gadget *gadget;
- struct usb_request *req; /* for control responses */
-
- /* when configured, we have one of two configs:
- * - source data (in to host) and sink it (out from host)
- * - or loop it back (out from host back in to host)
- */
- u8 config;
- struct usb_ep *in_ep, *out_ep;
-
- /* autoresume timer */
- struct timer_list resume;
-};
-
-#define DBG(d, fmt, args...) \
- dev_dbg(&(d)->gadget->dev , fmt , ## args)
-#define VDBG(d, fmt, args...) \
- dev_vdbg(&(d)->gadget->dev , fmt , ## args)
-#define ERROR(d, fmt, args...) \
- dev_err(&(d)->gadget->dev , fmt , ## args)
-#define WARN(d, fmt, args...) \
- dev_warn(&(d)->gadget->dev , fmt , ## args)
-#define INFO(d, fmt, args...) \
- dev_info(&(d)->gadget->dev , fmt , ## args)
-
-/*-------------------------------------------------------------------------*/
-
-static unsigned buflen = 4096;
-static unsigned qlen = 32;
-static unsigned pattern = 0;
-
-module_param(buflen, uint, S_IRUGO);
-module_param(qlen, uint, S_IRUGO);
-module_param(pattern, uint, S_IRUGO|S_IWUSR);
-
-/*
- * if it's nonzero, autoresume says how many seconds to wait
- * before trying to wake up the host after suspend.
- */
-static unsigned autoresume = 0;
-module_param(autoresume, uint, 0);
+unsigned buflen = 4096;
+module_param(buflen, uint, 0);
/*
* Normally the "loopback" configuration is second (index 1) so
* it's not the default. Here's where to change that order, to
- * work better with hosts where config changes are problematic.
- * Or controllers (like superh) that only support one config.
+ * work better with hosts where config changes are problematic or
+ * controllers (like original superh) that only support one config.
*/
static int loopdefault = 0;
module_param(loopdefault, bool, S_IRUGO|S_IWUSR);
@@ -156,24 +92,6 @@ module_param(loopdefault, bool, S_IRUGO|S_IWUSR);
/*-------------------------------------------------------------------------*/
-/*
- * DESCRIPTORS ... most are static, but strings and (full)
- * configuration descriptors are built on demand.
- */
-
-#define STRING_MANUFACTURER 25
-#define STRING_PRODUCT 42
-#define STRING_SERIAL 101
-#define STRING_SOURCE_SINK 250
-#define STRING_LOOPBACK 251
-
-/*
- * This device advertises two configurations; these numbers work
- * on a pxa250 as well as more flexible hardware.
- */
-#define CONFIG_SOURCE_SINK 3
-#define CONFIG_LOOPBACK 2
-
static struct usb_device_descriptor device_desc = {
.bLength = sizeof device_desc,
.bDescriptorType = USB_DT_DEVICE,
@@ -183,248 +101,64 @@ static struct usb_device_descriptor device_desc = {
.idVendor = __constant_cpu_to_le16(DRIVER_VENDOR_NUM),
.idProduct = __constant_cpu_to_le16(DRIVER_PRODUCT_NUM),
- .iManufacturer = STRING_MANUFACTURER,
- .iProduct = STRING_PRODUCT,
- .iSerialNumber = STRING_SERIAL,
.bNumConfigurations = 2,
};
-static struct usb_config_descriptor source_sink_config = {
- .bLength = sizeof source_sink_config,
- .bDescriptorType = USB_DT_CONFIG,
-
- /* compute wTotalLength on the fly */
- .bNumInterfaces = 1,
- .bConfigurationValue = CONFIG_SOURCE_SINK,
- .iConfiguration = STRING_SOURCE_SINK,
- .bmAttributes = USB_CONFIG_ATT_ONE | USB_CONFIG_ATT_SELFPOWER,
- .bMaxPower = 1, /* self-powered */
-};
-
-static struct usb_config_descriptor loopback_config = {
- .bLength = sizeof loopback_config,
- .bDescriptorType = USB_DT_CONFIG,
-
- /* compute wTotalLength on the fly */
- .bNumInterfaces = 1,
- .bConfigurationValue = CONFIG_LOOPBACK,
- .iConfiguration = STRING_LOOPBACK,
- .bmAttributes = USB_CONFIG_ATT_ONE | USB_CONFIG_ATT_SELFPOWER,
- .bMaxPower = 1, /* self-powered */
-};
-
+#ifdef CONFIG_USB_OTG
static struct usb_otg_descriptor otg_descriptor = {
.bLength = sizeof otg_descriptor,
.bDescriptorType = USB_DT_OTG,
- .bmAttributes = USB_OTG_SRP,
-};
-
-/* one interface in each configuration */
-
-static const struct usb_interface_descriptor source_sink_intf = {
- .bLength = sizeof source_sink_intf,
- .bDescriptorType = USB_DT_INTERFACE,
-
- .bNumEndpoints = 2,
- .bInterfaceClass = USB_CLASS_VENDOR_SPEC,
- .iInterface = STRING_SOURCE_SINK,
-};
-
-static const struct usb_interface_descriptor loopback_intf = {
- .bLength = sizeof loopback_intf,
- .bDescriptorType = USB_DT_INTERFACE,
-
- .bNumEndpoints = 2,
- .bInterfaceClass = USB_CLASS_VENDOR_SPEC,
- .iInterface = STRING_LOOPBACK,
-};
-
-/* two full speed bulk endpoints; their use is config-dependent */
-
-static struct usb_endpoint_descriptor fs_source_desc = {
- .bLength = USB_DT_ENDPOINT_SIZE,
- .bDescriptorType = USB_DT_ENDPOINT,
-
- .bEndpointAddress = USB_DIR_IN,
- .bmAttributes = USB_ENDPOINT_XFER_BULK,
-};
-
-static struct usb_endpoint_descriptor fs_sink_desc = {
- .bLength = USB_DT_ENDPOINT_SIZE,
- .bDescriptorType = USB_DT_ENDPOINT,
-
- .bEndpointAddress = USB_DIR_OUT,
- .bmAttributes = USB_ENDPOINT_XFER_BULK,
-};
-
-static const struct usb_descriptor_header *fs_source_sink_function[] = {
- (struct usb_descriptor_header *) &otg_descriptor,
- (struct usb_descriptor_header *) &source_sink_intf,
- (struct usb_descriptor_header *) &fs_sink_desc,
- (struct usb_descriptor_header *) &fs_source_desc,
- NULL,
-};
-
-static const struct usb_descriptor_header *fs_loopback_function[] = {
- (struct usb_descriptor_header *) &otg_descriptor,
- (struct usb_descriptor_header *) &loopback_intf,
- (struct usb_descriptor_header *) &fs_sink_desc,
- (struct usb_descriptor_header *) &fs_source_desc,
- NULL,
-};
-
-/*
- * usb 2.0 devices need to expose both high speed and full speed
- * descriptors, unless they only run at full speed.
- *
- * that means alternate endpoint descriptors (bigger packets)
- * and a "device qualifier" ... plus more construction options
- * for the config descriptor.
- */
-
-static struct usb_endpoint_descriptor hs_source_desc = {
- .bLength = USB_DT_ENDPOINT_SIZE,
- .bDescriptorType = USB_DT_ENDPOINT,
-
- .bmAttributes = USB_ENDPOINT_XFER_BULK,
- .wMaxPacketSize = __constant_cpu_to_le16(512),
-};
-
-static struct usb_endpoint_descriptor hs_sink_desc = {
- .bLength = USB_DT_ENDPOINT_SIZE,
- .bDescriptorType = USB_DT_ENDPOINT,
-
- .bmAttributes = USB_ENDPOINT_XFER_BULK,
- .wMaxPacketSize = __constant_cpu_to_le16(512),
-};
-
-static struct usb_qualifier_descriptor dev_qualifier = {
- .bLength = sizeof dev_qualifier,
- .bDescriptorType = USB_DT_DEVICE_QUALIFIER,
-
- .bcdUSB = __constant_cpu_to_le16(0x0200),
- .bDeviceClass = USB_CLASS_VENDOR_SPEC,
-
- .bNumConfigurations = 2,
+ /* REVISIT SRP-only hardware is possible, although
+ * it would not be called "OTG" ...
+ */
+ .bmAttributes = USB_OTG_SRP | USB_OTG_HNP,
};
-static const struct usb_descriptor_header *hs_source_sink_function[] = {
+const struct usb_descriptor_header *otg_desc[] = {
(struct usb_descriptor_header *) &otg_descriptor,
- (struct usb_descriptor_header *) &source_sink_intf,
- (struct usb_descriptor_header *) &hs_source_desc,
- (struct usb_descriptor_header *) &hs_sink_desc,
NULL,
};
+#endif
-static const struct usb_descriptor_header *hs_loopback_function[] = {
- (struct usb_descriptor_header *) &otg_descriptor,
- (struct usb_descriptor_header *) &loopback_intf,
- (struct usb_descriptor_header *) &hs_source_desc,
- (struct usb_descriptor_header *) &hs_sink_desc,
- NULL,
-};
+/* string IDs are assigned dynamically */
-/* maxpacket and other transfer characteristics vary by speed. */
-static inline struct usb_endpoint_descriptor *
-ep_desc(struct usb_gadget *g, struct usb_endpoint_descriptor *hs,
- struct usb_endpoint_descriptor *fs)
-{
- if (gadget_is_dualspeed(g) && g->speed == USB_SPEED_HIGH)
- return hs;
- return fs;
-}
+#define STRING_MANUFACTURER_IDX 0
+#define STRING_PRODUCT_IDX 1
+#define STRING_SERIAL_IDX 2
static char manufacturer[50];
/* default serial number takes at least two packets */
static char serial[] = "0123456789.0123456789.0123456789";
-
-/* static strings, in UTF-8 */
-static struct usb_string strings[] = {
- { STRING_MANUFACTURER, manufacturer, },
- { STRING_PRODUCT, longname, },
- { STRING_SERIAL, serial, },
- { STRING_LOOPBACK, loopback, },
- { STRING_SOURCE_SINK, source_sink, },
+static struct usb_string strings_dev[] = {
+ [STRING_MANUFACTURER_IDX].s = manufacturer,
+ [STRING_PRODUCT_IDX].s = longname,
+ [STRING_SERIAL_IDX].s = serial,
{ } /* end of list */
};
-static struct usb_gadget_strings stringtab = {
+static struct usb_gadget_strings stringtab_dev = {
.language = 0x0409, /* en-us */
- .strings = strings,
+ .strings = strings_dev,
};
-/*
- * config descriptors are also handcrafted. these must agree with code
- * that sets configurations, and with code managing interfaces and their
- * altsettings. other complexity may come from:
- *
- * - high speed support, including "other speed config" rules
- * - multiple configurations
- * - interfaces with alternate settings
- * - embedded class or vendor-specific descriptors
- *
- * this handles high speed, and has a second config that could as easily
- * have been an alternate interface setting (on most hardware).
- *
- * NOTE: to demonstrate (and test) more USB capabilities, this driver
- * should include an altsetting to test interrupt transfers, including
- * high bandwidth modes at high speed. (Maybe work like Intel's test
- * device?)
- */
-static int config_buf(struct usb_gadget *gadget,
- u8 *buf, u8 type, unsigned index)
-{
- int is_source_sink;
- int len;
- const struct usb_descriptor_header **function;
- int hs = 0;
-
- /* two configurations will always be index 0 and index 1 */
- if (index > 1)
- return -EINVAL;
- is_source_sink = loopdefault ? (index == 1) : (index == 0);
-
- if (gadget_is_dualspeed(gadget)) {
- hs = (gadget->speed == USB_SPEED_HIGH);
- if (type == USB_DT_OTHER_SPEED_CONFIG)
- hs = !hs;
- }
- if (hs)
- function = is_source_sink
- ? hs_source_sink_function
- : hs_loopback_function;
- else
- function = is_source_sink
- ? fs_source_sink_function
- : fs_loopback_function;
-
- /* for now, don't advertise srp-only devices */
- if (!gadget_is_otg(gadget))
- function++;
-
- len = usb_gadget_config_buf(is_source_sink
- ? &source_sink_config
- : &loopback_config,
- buf, USB_BUFSIZ, function);
- if (len < 0)
- return len;
- ((struct usb_config_descriptor *) buf)->bDescriptorType = type;
- return len;
-}
+static struct usb_gadget_strings *dev_strings[] = {
+ &stringtab_dev,
+ NULL,
+};
/*-------------------------------------------------------------------------*/
-static struct usb_request *alloc_ep_req(struct usb_ep *ep, unsigned length)
+struct usb_request *alloc_ep_req(struct usb_ep *ep)
{
struct usb_request *req;
req = usb_ep_alloc_request(ep, GFP_ATOMIC);
if (req) {
- req->length = length;
- req->buf = kmalloc(length, GFP_ATOMIC);
+ req->length = buflen;
+ req->buf = kmalloc(buflen, GFP_ATOMIC);
if (!req->buf) {
usb_ep_free_request(ep, req);
req = NULL;
@@ -433,681 +167,73 @@ static struct usb_request *alloc_ep_req(struct usb_ep *ep, unsigned length)
return req;
}
-static void free_ep_req(struct usb_ep *ep, struct usb_request *req)
+void free_ep_req(struct usb_ep *ep, struct usb_request *req)
{
kfree(req->buf);
usb_ep_free_request(ep, req);
}
-/*-------------------------------------------------------------------------*/
-
-/*
- * SOURCE/SINK FUNCTION ... a primary testing vehicle for USB peripherals,
- * this just sinks bulk packets OUT to the peripheral and sources them IN
- * to the host, optionally with specific data patterns.
- *
- * In terms of control messaging, this supports all the standard requests
- * plus two that support control-OUT tests.
- *
- * Note that because this doesn't queue more than one request at a time,
- * some other function must be used to test queueing logic. The network
- * link (g_ether) is probably the best option for that.
- */
-
-/* optionally require specific source/sink data patterns */
-
-static int
-check_read_data(
- struct zero_dev *dev,
- struct usb_ep *ep,
- struct usb_request *req
-)
+static void disable_ep(struct usb_composite_dev *cdev, struct usb_ep *ep)
{
- unsigned i;
- u8 *buf = req->buf;
-
- for (i = 0; i < req->actual; i++, buf++) {
- switch (pattern) {
- /* all-zeroes has no synchronization issues */
- case 0:
- if (*buf == 0)
- continue;
- break;
- /* mod63 stays in sync with short-terminated transfers,
- * or otherwise when host and gadget agree on how large
- * each usb transfer request should be. resync is done
- * with set_interface or set_config.
- */
- case 1:
- if (*buf == (u8)(i % 63))
- continue;
- break;
- }
- ERROR(dev, "bad OUT byte, buf[%d] = %d\n", i, *buf);
- usb_ep_set_halt(ep);
- return -EINVAL;
+ int value;
+
+ if (ep->driver_data) {
+ value = usb_ep_disable(ep);
+ if (value < 0)
+ DBG(cdev, "disable %s --> %d\n",
+ ep->name, value);
+ ep->driver_data = NULL;
}
- return 0;
}
-static void reinit_write_data(struct usb_ep *ep, struct usb_request *req)
+void disable_endpoints(struct usb_composite_dev *cdev,
+ struct usb_ep *in, struct usb_ep *out)
{
- unsigned i;
- u8 *buf = req->buf;
-
- switch (pattern) {
- case 0:
- memset(req->buf, 0, req->length);
- break;
- case 1:
- for (i = 0; i < req->length; i++)
- *buf++ = (u8) (i % 63);
- break;
- }
-}
-
-/* if there is only one request in the queue, there'll always be an
- * irq delay between end of one request and start of the next.
- * that prevents using hardware dma queues.
- */
-static void source_sink_complete(struct usb_ep *ep, struct usb_request *req)
-{
- struct zero_dev *dev = ep->driver_data;
- int status = req->status;
-
- switch (status) {
-
- case 0: /* normal completion? */
- if (ep == dev->out_ep) {
- check_read_data(dev, ep, req);
- memset(req->buf, 0x55, req->length);
- } else
- reinit_write_data(ep, req);
- break;
-
- /* this endpoint is normally active while we're configured */
- case -ECONNABORTED: /* hardware forced ep reset */
- case -ECONNRESET: /* request dequeued */
- case -ESHUTDOWN: /* disconnect from host */
- VDBG(dev, "%s gone (%d), %d/%d\n", ep->name, status,
- req->actual, req->length);
- if (ep == dev->out_ep)
- check_read_data(dev, ep, req);
- free_ep_req(ep, req);
- return;
-
- case -EOVERFLOW: /* buffer overrun on read means that
- * we didn't provide a big enough
- * buffer.
- */
- default:
-#if 1
- DBG(dev, "%s complete --> %d, %d/%d\n", ep->name,
- status, req->actual, req->length);
-#endif
- case -EREMOTEIO: /* short read */
- break;
- }
-
- status = usb_ep_queue(ep, req, GFP_ATOMIC);
- if (status) {
- ERROR(dev, "kill %s: resubmit %d bytes --> %d\n",
- ep->name, req->length, status);
- usb_ep_set_halt(ep);
- /* FIXME recover later ... somehow */
- }
-}
-
-static struct usb_request *source_sink_start_ep(struct usb_ep *ep)
-{
- struct usb_request *req;
- int status;
-
- req = alloc_ep_req(ep, buflen);
- if (!req)
- return NULL;
-
- memset(req->buf, 0, req->length);
- req->complete = source_sink_complete;
-
- if (strcmp(ep->name, EP_IN_NAME) == 0)
- reinit_write_data(ep, req);
- else
- memset(req->buf, 0x55, req->length);
-
- status = usb_ep_queue(ep, req, GFP_ATOMIC);
- if (status) {
- struct zero_dev *dev = ep->driver_data;
-
- ERROR(dev, "start %s --> %d\n", ep->name, status);
- free_ep_req(ep, req);
- req = NULL;
- }
-
- return req;
-}
-
-static int set_source_sink_config(struct zero_dev *dev)
-{
- int result = 0;
- struct usb_ep *ep;
- struct usb_gadget *gadget = dev->gadget;
-
- gadget_for_each_ep(ep, gadget) {
- const struct usb_endpoint_descriptor *d;
-
- /* one endpoint writes (sources) zeroes in (to the host) */
- if (strcmp(ep->name, EP_IN_NAME) == 0) {
- d = ep_desc(gadget, &hs_source_desc, &fs_source_desc);
- result = usb_ep_enable(ep, d);
- if (result == 0) {
- ep->driver_data = dev;
- if (source_sink_start_ep(ep) != NULL) {
- dev->in_ep = ep;
- continue;
- }
- usb_ep_disable(ep);
- result = -EIO;
- }
-
- /* one endpoint reads (sinks) anything out (from the host) */
- } else if (strcmp(ep->name, EP_OUT_NAME) == 0) {
- d = ep_desc(gadget, &hs_sink_desc, &fs_sink_desc);
- result = usb_ep_enable(ep, d);
- if (result == 0) {
- ep->driver_data = dev;
- if (source_sink_start_ep(ep) != NULL) {
- dev->out_ep = ep;
- continue;
- }
- usb_ep_disable(ep);
- result = -EIO;
- }
-
- /* ignore any other endpoints */
- } else
- continue;
-
- /* stop on error */
- ERROR(dev, "can't start %s, result %d\n", ep->name, result);
- break;
- }
- if (result == 0)
- DBG(dev, "buflen %d\n", buflen);
-
- /* caller is responsible for cleanup on error */
- return result;
-}
-
-/*-------------------------------------------------------------------------*/
-
-static void loopback_complete(struct usb_ep *ep, struct usb_request *req)
-{
- struct zero_dev *dev = ep->driver_data;
- int status = req->status;
-
- switch (status) {
-
- case 0: /* normal completion? */
- if (ep == dev->out_ep) {
- /* loop this OUT packet back IN to the host */
- req->zero = (req->actual < req->length);
- req->length = req->actual;
- status = usb_ep_queue(dev->in_ep, req, GFP_ATOMIC);
- if (status == 0)
- return;
-
- /* "should never get here" */
- ERROR(dev, "can't loop %s to %s: %d\n",
- ep->name, dev->in_ep->name,
- status);
- }
-
- /* queue the buffer for some later OUT packet */
- req->length = buflen;
- status = usb_ep_queue(dev->out_ep, req, GFP_ATOMIC);
- if (status == 0)
- return;
-
- /* "should never get here" */
- /* FALLTHROUGH */
-
- default:
- ERROR(dev, "%s loop complete --> %d, %d/%d\n", ep->name,
- status, req->actual, req->length);
- /* FALLTHROUGH */
-
- /* NOTE: since this driver doesn't maintain an explicit record
- * of requests it submitted (just maintains qlen count), we
- * rely on the hardware driver to clean up on disconnect or
- * endpoint disable.
- */
- case -ECONNABORTED: /* hardware forced ep reset */
- case -ECONNRESET: /* request dequeued */
- case -ESHUTDOWN: /* disconnect from host */
- free_ep_req(ep, req);
- return;
- }
-}
-
-static int set_loopback_config(struct zero_dev *dev)
-{
- int result = 0;
- struct usb_ep *ep;
- struct usb_gadget *gadget = dev->gadget;
-
- gadget_for_each_ep(ep, gadget) {
- const struct usb_endpoint_descriptor *d;
-
- /* one endpoint writes data back IN to the host */
- if (strcmp(ep->name, EP_IN_NAME) == 0) {
- d = ep_desc(gadget, &hs_source_desc, &fs_source_desc);
- result = usb_ep_enable(ep, d);
- if (result == 0) {
- ep->driver_data = dev;
- dev->in_ep = ep;
- continue;
- }
-
- /* one endpoint just reads OUT packets */
- } else if (strcmp(ep->name, EP_OUT_NAME) == 0) {
- d = ep_desc(gadget, &hs_sink_desc, &fs_sink_desc);
- result = usb_ep_enable(ep, d);
- if (result == 0) {
- ep->driver_data = dev;
- dev->out_ep = ep;
- continue;
- }
-
- /* ignore any other endpoints */
- } else
- continue;
-
- /* stop on error */
- ERROR(dev, "can't enable %s, result %d\n", ep->name, result);
- break;
- }
-
- /* allocate a bunch of read buffers and queue them all at once.
- * we buffer at most 'qlen' transfers; fewer if any need more
- * than 'buflen' bytes each.
- */
- if (result == 0) {
- struct usb_request *req;
- unsigned i;
-
- ep = dev->out_ep;
- for (i = 0; i < qlen && result == 0; i++) {
- req = alloc_ep_req(ep, buflen);
- if (req) {
- req->complete = loopback_complete;
- result = usb_ep_queue(ep, req, GFP_ATOMIC);
- if (result)
- DBG(dev, "%s queue req --> %d\n",
- ep->name, result);
- } else
- result = -ENOMEM;
- }
- }
- if (result == 0)
- DBG(dev, "qlen %d, buflen %d\n", qlen, buflen);
-
- /* caller is responsible for cleanup on error */
- return result;
-}
-
-/*-------------------------------------------------------------------------*/
-
-static void zero_reset_config(struct zero_dev *dev)
-{
- if (dev->config == 0)
- return;
-
- DBG(dev, "reset config\n");
-
- /* just disable endpoints, forcing completion of pending i/o.
- * all our completion handlers free their requests in this case.
- */
- if (dev->in_ep) {
- usb_ep_disable(dev->in_ep);
- dev->in_ep = NULL;
- }
- if (dev->out_ep) {
- usb_ep_disable(dev->out_ep);
- dev->out_ep = NULL;
- }
- dev->config = 0;
- del_timer(&dev->resume);
-}
-
-/* change our operational config. this code must agree with the code
- * that returns config descriptors, and altsetting code.
- *
- * it's also responsible for power management interactions. some
- * configurations might not work with our current power sources.
- *
- * note that some device controller hardware will constrain what this
- * code can do, perhaps by disallowing more than one configuration or
- * by limiting configuration choices (like the pxa2xx).
- */
-static int zero_set_config(struct zero_dev *dev, unsigned number)
-{
- int result = 0;
- struct usb_gadget *gadget = dev->gadget;
-
- if (number == dev->config)
- return 0;
-
- if (gadget_is_sa1100(gadget) && dev->config) {
- /* tx fifo is full, but we can't clear it...*/
- ERROR(dev, "can't change configurations\n");
- return -ESPIPE;
- }
- zero_reset_config(dev);
-
- switch (number) {
- case CONFIG_SOURCE_SINK:
- result = set_source_sink_config(dev);
- break;
- case CONFIG_LOOPBACK:
- result = set_loopback_config(dev);
- break;
- default:
- result = -EINVAL;
- /* FALL THROUGH */
- case 0:
- return result;
- }
-
- if (!result && (!dev->in_ep || !dev->out_ep))
- result = -ENODEV;
- if (result)
- zero_reset_config(dev);
- else {
- char *speed;
-
- switch (gadget->speed) {
- case USB_SPEED_LOW: speed = "low"; break;
- case USB_SPEED_FULL: speed = "full"; break;
- case USB_SPEED_HIGH: speed = "high"; break;
- default: speed = "?"; break;
- }
-
- dev->config = number;
- INFO(dev, "%s speed config #%d: %s\n", speed, number,
- (number == CONFIG_SOURCE_SINK)
- ? source_sink : loopback);
- }
- return result;
-}
-
-/*-------------------------------------------------------------------------*/
-
-static void zero_setup_complete(struct usb_ep *ep, struct usb_request *req)
-{
- if (req->status || req->actual != req->length)
- DBG((struct zero_dev *) ep->driver_data,
- "setup complete --> %d, %d/%d\n",
- req->status, req->actual, req->length);
-}
-
-/*
- * The setup() callback implements all the ep0 functionality that's
- * not handled lower down, in hardware or the hardware driver (like
- * device and endpoint feature flags, and their status). It's all
- * housekeeping for the gadget function we're implementing. Most of
- * the work is in config-specific setup.
- */
-static int
-zero_setup(struct usb_gadget *gadget, const struct usb_ctrlrequest *ctrl)
-{
- struct zero_dev *dev = get_gadget_data(gadget);
- struct usb_request *req = dev->req;
- int value = -EOPNOTSUPP;
- u16 w_index = le16_to_cpu(ctrl->wIndex);
- u16 w_value = le16_to_cpu(ctrl->wValue);
- u16 w_length = le16_to_cpu(ctrl->wLength);
-
- /* usually this stores reply data in the pre-allocated ep0 buffer,
- * but config change events will reconfigure hardware.
- */
- req->zero = 0;
- switch (ctrl->bRequest) {
-
- case USB_REQ_GET_DESCRIPTOR:
- if (ctrl->bRequestType != USB_DIR_IN)
- goto unknown;
- switch (w_value >> 8) {
-
- case USB_DT_DEVICE:
- value = min(w_length, (u16) sizeof device_desc);
- memcpy(req->buf, &device_desc, value);
- break;
- case USB_DT_DEVICE_QUALIFIER:
- if (!gadget_is_dualspeed(gadget))
- break;
- value = min(w_length, (u16) sizeof dev_qualifier);
- memcpy(req->buf, &dev_qualifier, value);
- break;
-
- case USB_DT_OTHER_SPEED_CONFIG:
- if (!gadget_is_dualspeed(gadget))
- break;
- // FALLTHROUGH
- case USB_DT_CONFIG:
- value = config_buf(gadget, req->buf,
- w_value >> 8,
- w_value & 0xff);
- if (value >= 0)
- value = min(w_length, (u16) value);
- break;
-
- case USB_DT_STRING:
- /* wIndex == language code.
- * this driver only handles one language, you can
- * add string tables for other languages, using
- * any UTF-8 characters
- */
- value = usb_gadget_get_string(&stringtab,
- w_value & 0xff, req->buf);
- if (value >= 0)
- value = min(w_length, (u16) value);
- break;
- }
- break;
-
- /* currently two configs, two speeds */
- case USB_REQ_SET_CONFIGURATION:
- if (ctrl->bRequestType != 0)
- goto unknown;
- if (gadget->a_hnp_support)
- DBG(dev, "HNP available\n");
- else if (gadget->a_alt_hnp_support)
- DBG(dev, "HNP needs a different root port\n");
- else
- VDBG(dev, "HNP inactive\n");
- spin_lock(&dev->lock);
- value = zero_set_config(dev, w_value);
- spin_unlock(&dev->lock);
- break;
- case USB_REQ_GET_CONFIGURATION:
- if (ctrl->bRequestType != USB_DIR_IN)
- goto unknown;
- *(u8 *)req->buf = dev->config;
- value = min(w_length, (u16) 1);
- break;
-
- /* until we add altsetting support, or other interfaces,
- * only 0/0 are possible. pxa2xx only supports 0/0 (poorly)
- * and already killed pending endpoint I/O.
- */
- case USB_REQ_SET_INTERFACE:
- if (ctrl->bRequestType != USB_RECIP_INTERFACE)
- goto unknown;
- spin_lock(&dev->lock);
- if (dev->config && w_index == 0 && w_value == 0) {
- u8 config = dev->config;
-
- /* resets interface configuration, forgets about
- * previous transaction state (queued bufs, etc)
- * and re-inits endpoint state (toggle etc)
- * no response queued, just zero status == success.
- * if we had more than one interface we couldn't
- * use this "reset the config" shortcut.
- */
- zero_reset_config(dev);
- zero_set_config(dev, config);
- value = 0;
- }
- spin_unlock(&dev->lock);
- break;
- case USB_REQ_GET_INTERFACE:
- if (ctrl->bRequestType != (USB_DIR_IN|USB_RECIP_INTERFACE))
- goto unknown;
- if (!dev->config)
- break;
- if (w_index != 0) {
- value = -EDOM;
- break;
- }
- *(u8 *)req->buf = 0;
- value = min(w_length, (u16) 1);
- break;
-
- /*
- * These are the same vendor-specific requests supported by
- * Intel's USB 2.0 compliance test devices. We exceed that
- * device spec by allowing multiple-packet requests.
- */
- case 0x5b: /* control WRITE test -- fill the buffer */
- if (ctrl->bRequestType != (USB_DIR_OUT|USB_TYPE_VENDOR))
- goto unknown;
- if (w_value || w_index)
- break;
- /* just read that many bytes into the buffer */
- if (w_length > USB_BUFSIZ)
- break;
- value = w_length;
- break;
- case 0x5c: /* control READ test -- return the buffer */
- if (ctrl->bRequestType != (USB_DIR_IN|USB_TYPE_VENDOR))
- goto unknown;
- if (w_value || w_index)
- break;
- /* expect those bytes are still in the buffer; send back */
- if (w_length > USB_BUFSIZ
- || w_length != req->length)
- break;
- value = w_length;
- break;
-
- default:
-unknown:
- VDBG(dev,
- "unknown control req%02x.%02x v%04x i%04x l%d\n",
- ctrl->bRequestType, ctrl->bRequest,
- w_value, w_index, w_length);
- }
-
- /* respond with data transfer before status phase? */
- if (value >= 0) {
- req->length = value;
- req->zero = value < w_length;
- value = usb_ep_queue(gadget->ep0, req, GFP_ATOMIC);
- if (value < 0) {
- DBG(dev, "ep_queue --> %d\n", value);
- req->status = 0;
- zero_setup_complete(gadget->ep0, req);
- }
- }
-
- /* device either stalls (value < 0) or reports success */
- return value;
-}
-
-static void zero_disconnect(struct usb_gadget *gadget)
-{
- struct zero_dev *dev = get_gadget_data(gadget);
- unsigned long flags;
-
- spin_lock_irqsave(&dev->lock, flags);
- zero_reset_config(dev);
-
- /* a more significant application might have some non-usb
- * activities to quiesce here, saving resources like power
- * or pushing the notification up a network stack.
- */
- spin_unlock_irqrestore(&dev->lock, flags);
-
- /* next we may get setup() calls to enumerate new connections;
- * or an unbind() during shutdown (including removing module).
- */
-}
-
-static void zero_autoresume(unsigned long _dev)
-{
- struct zero_dev *dev = (struct zero_dev *) _dev;
- int status;
-
- /* normally the host would be woken up for something
- * more significant than just a timer firing...
- */
- if (dev->gadget->speed != USB_SPEED_UNKNOWN) {
- status = usb_gadget_wakeup(dev->gadget);
- DBG(dev, "wakeup --> %d\n", status);
- }
+ disable_ep(cdev, in);
+ disable_ep(cdev, out);
}
/*-------------------------------------------------------------------------*/
-static void zero_unbind(struct usb_gadget *gadget)
+static int __init zero_bind(struct usb_composite_dev *cdev)
{
- struct zero_dev *dev = get_gadget_data(gadget);
-
- DBG(dev, "unbind\n");
-
- /* we've already been disconnected ... no i/o is active */
- if (dev->req) {
- dev->req->length = USB_BUFSIZ;
- free_ep_req(gadget->ep0, dev->req);
- }
- del_timer_sync(&dev->resume);
- kfree(dev);
- set_gadget_data(gadget, NULL);
-}
-
-static int __init zero_bind(struct usb_gadget *gadget)
-{
- struct zero_dev *dev;
- struct usb_ep *ep;
int gcnum;
+ struct usb_gadget *gadget = cdev->gadget;
+ int id;
- /* FIXME this can't yet work right with SH ... it has only
- * one configuration, numbered one.
+ /* Allocate string descriptor numbers ... note that string
+ * contents can be overridden by the composite_dev glue.
*/
- if (gadget_is_sh(gadget))
- return -ENODEV;
-
- /* Bulk-only drivers like this one SHOULD be able to
- * autoconfigure on any sane usb controller driver,
- * but there may also be important quirks to address.
+ id = usb_string_id(cdev);
+ if (id < 0)
+ return id;
+ strings_dev[STRING_MANUFACTURER_IDX].id = id;
+ device_desc.iManufacturer = id;
+
+ id = usb_string_id(cdev);
+ if (id < 0)
+ return id;
+ strings_dev[STRING_PRODUCT_IDX].id = id;
+ device_desc.iProduct = id;
+
+ id = usb_string_id(cdev);
+ if (id < 0)
+ return id;
+ strings_dev[STRING_SERIAL_IDX].id = id;
+ device_desc.iSerialNumber = id;
+
+ /* Register primary, then secondary configuration. Note that
+ * SH3 only allows one config...
*/
- usb_ep_autoconfig_reset(gadget);
- ep = usb_ep_autoconfig(gadget, &fs_source_desc);
- if (!ep) {
-autoconf_fail:
- pr_err("%s: can't autoconfigure on %s\n",
- shortname, gadget->name);
- return -ENODEV;
+ if (loopdefault) {
+ loopback_add(cdev);
+ if (!gadget_is_sh(gadget))
+ sourcesink_add(cdev);
+ } else {
+ sourcesink_add(cdev);
+ if (!gadget_is_sh(gadget))
+ loopback_add(cdev);
}
- EP_IN_NAME = ep->name;
- ep->driver_data = ep; /* claim */
-
- ep = usb_ep_autoconfig(gadget, &fs_sink_desc);
- if (!ep)
- goto autoconf_fail;
- EP_OUT_NAME = ep->name;
- ep->driver_data = ep; /* claim */
gcnum = usb_gadget_controller_number(gadget);
if (gcnum >= 0)
@@ -1115,144 +241,44 @@ autoconf_fail:
else {
/* gadget zero is so simple (for now, no altsettings) that
* it SHOULD NOT have problems with bulk-capable hardware.
- * so warn about unrcognized controllers, don't panic.
+ * so just warn about unrcognized controllers -- don't panic.
*
* things like configuration and altsetting numbering
* can need hardware-specific attention though.
*/
pr_warning("%s: controller '%s' not recognized\n",
- shortname, gadget->name);
+ longname, gadget->name);
device_desc.bcdDevice = __constant_cpu_to_le16(0x9999);
}
- /* ok, we made sense of the hardware ... */
- dev = kzalloc(sizeof(*dev), GFP_KERNEL);
- if (!dev)
- return -ENOMEM;
- spin_lock_init(&dev->lock);
- dev->gadget = gadget;
- set_gadget_data(gadget, dev);
-
- init_timer(&dev->resume);
- dev->resume.function = zero_autoresume;
- dev->resume.data = (unsigned long) dev;
-
- /* preallocate control response and buffer */
- dev->req = usb_ep_alloc_request(gadget->ep0, GFP_KERNEL);
- if (!dev->req)
- goto enomem;
- dev->req->buf = kmalloc(USB_BUFSIZ, GFP_KERNEL);
- if (!dev->req->buf)
- goto enomem;
-
- dev->req->complete = zero_setup_complete;
-
- device_desc.bMaxPacketSize0 = gadget->ep0->maxpacket;
-
- if (gadget_is_dualspeed(gadget)) {
- /* assume ep0 uses the same value for both speeds ... */
- dev_qualifier.bMaxPacketSize0 = device_desc.bMaxPacketSize0;
-
- /* and that all endpoints are dual-speed */
- hs_source_desc.bEndpointAddress =
- fs_source_desc.bEndpointAddress;
- hs_sink_desc.bEndpointAddress =
- fs_sink_desc.bEndpointAddress;
- }
-
- if (gadget_is_otg(gadget)) {
- otg_descriptor.bmAttributes |= USB_OTG_HNP,
- source_sink_config.bmAttributes |= USB_CONFIG_ATT_WAKEUP;
- loopback_config.bmAttributes |= USB_CONFIG_ATT_WAKEUP;
- }
-
- usb_gadget_set_selfpowered(gadget);
-
- if (autoresume) {
- source_sink_config.bmAttributes |= USB_CONFIG_ATT_WAKEUP;
- loopback_config.bmAttributes |= USB_CONFIG_ATT_WAKEUP;
- }
-
- gadget->ep0->driver_data = dev;
-
- INFO(dev, "%s, version: " DRIVER_VERSION "\n", longname);
- INFO(dev, "using %s, OUT %s IN %s\n", gadget->name,
- EP_OUT_NAME, EP_IN_NAME);
+ INFO(cdev, "%s, version: " DRIVER_VERSION "\n", longname);
snprintf(manufacturer, sizeof manufacturer, "%s %s with %s",
init_utsname()->sysname, init_utsname()->release,
gadget->name);
return 0;
-
-enomem:
- zero_unbind(gadget);
- return -ENOMEM;
}
-/*-------------------------------------------------------------------------*/
-
-static void zero_suspend(struct usb_gadget *gadget)
-{
- struct zero_dev *dev = get_gadget_data(gadget);
-
- if (gadget->speed == USB_SPEED_UNKNOWN)
- return;
-
- if (autoresume) {
- mod_timer(&dev->resume, jiffies + (HZ * autoresume));
- DBG(dev, "suspend, wakeup in %d seconds\n", autoresume);
- } else
- DBG(dev, "suspend\n");
-}
-
-static void zero_resume(struct usb_gadget *gadget)
-{
- struct zero_dev *dev = get_gadget_data(gadget);
-
- DBG(dev, "resume\n");
- del_timer(&dev->resume);
-}
-
-
-/*-------------------------------------------------------------------------*/
-
-static struct usb_gadget_driver zero_driver = {
-#ifdef CONFIG_USB_GADGET_DUALSPEED
- .speed = USB_SPEED_HIGH,
-#else
- .speed = USB_SPEED_FULL,
-#endif
- .function = (char *) longname,
+static struct usb_composite_driver zero_driver = {
+ .name = "zero",
+ .dev = &device_desc,
+ .strings = dev_strings,
.bind = zero_bind,
- .unbind = __exit_p(zero_unbind),
-
- .setup = zero_setup,
- .disconnect = zero_disconnect,
-
- .suspend = zero_suspend,
- .resume = zero_resume,
-
- .driver = {
- .name = (char *) shortname,
- .owner = THIS_MODULE,
- },
};
MODULE_AUTHOR("David Brownell");
MODULE_LICENSE("GPL");
-
static int __init init(void)
{
- return usb_gadget_register_driver(&zero_driver);
+ return usb_composite_register(&zero_driver);
}
module_init(init);
static void __exit cleanup(void)
{
- usb_gadget_unregister_driver(&zero_driver);
+ usb_composite_unregister(&zero_driver);
}
module_exit(cleanup);
-