aboutsummaryrefslogtreecommitdiff
path: root/drivers/usb/host/xhci-mem.c
diff options
context:
space:
mode:
Diffstat (limited to 'drivers/usb/host/xhci-mem.c')
-rw-r--r--drivers/usb/host/xhci-mem.c204
1 files changed, 199 insertions, 5 deletions
diff --git a/drivers/usb/host/xhci-mem.c b/drivers/usb/host/xhci-mem.c
index 005d44641d8..d34b91a135a 100644
--- a/drivers/usb/host/xhci-mem.c
+++ b/drivers/usb/host/xhci-mem.c
@@ -188,12 +188,187 @@ fail:
return 0;
}
+void xhci_free_virt_device(struct xhci_hcd *xhci, int slot_id)
+{
+ struct xhci_virt_device *dev;
+ int i;
+
+ /* Slot ID 0 is reserved */
+ if (slot_id == 0 || !xhci->devs[slot_id])
+ return;
+
+ dev = xhci->devs[slot_id];
+ xhci->dcbaa->dev_context_ptrs[2*slot_id] = 0;
+ xhci->dcbaa->dev_context_ptrs[2*slot_id + 1] = 0;
+ if (!dev)
+ return;
+
+ for (i = 0; i < 31; ++i)
+ if (dev->ep_rings[i])
+ xhci_ring_free(xhci, dev->ep_rings[i]);
+
+ if (dev->in_ctx)
+ dma_pool_free(xhci->device_pool,
+ dev->in_ctx, dev->in_ctx_dma);
+ if (dev->out_ctx)
+ dma_pool_free(xhci->device_pool,
+ dev->out_ctx, dev->out_ctx_dma);
+ kfree(xhci->devs[slot_id]);
+ xhci->devs[slot_id] = 0;
+}
+
+int xhci_alloc_virt_device(struct xhci_hcd *xhci, int slot_id,
+ struct usb_device *udev, gfp_t flags)
+{
+ dma_addr_t dma;
+ struct xhci_virt_device *dev;
+
+ /* Slot ID 0 is reserved */
+ if (slot_id == 0 || xhci->devs[slot_id]) {
+ xhci_warn(xhci, "Bad Slot ID %d\n", slot_id);
+ return 0;
+ }
+
+ xhci->devs[slot_id] = kzalloc(sizeof(*xhci->devs[slot_id]), flags);
+ if (!xhci->devs[slot_id])
+ return 0;
+ dev = xhci->devs[slot_id];
+
+ /* Allocate the (output) device context that will be used in the HC */
+ dev->out_ctx = dma_pool_alloc(xhci->device_pool, flags, &dma);
+ if (!dev->out_ctx)
+ goto fail;
+ dev->out_ctx_dma = dma;
+ xhci_dbg(xhci, "Slot %d output ctx = 0x%x (dma)\n", slot_id, dma);
+ memset(dev->out_ctx, 0, sizeof(*dev->out_ctx));
+
+ /* Allocate the (input) device context for address device command */
+ dev->in_ctx = dma_pool_alloc(xhci->device_pool, flags, &dma);
+ if (!dev->in_ctx)
+ goto fail;
+ dev->in_ctx_dma = dma;
+ xhci_dbg(xhci, "Slot %d input ctx = 0x%x (dma)\n", slot_id, dma);
+ memset(dev->in_ctx, 0, sizeof(*dev->in_ctx));
+
+ /* Allocate endpoint 0 ring */
+ dev->ep_rings[0] = xhci_ring_alloc(xhci, 1, true, flags);
+ if (!dev->ep_rings[0])
+ goto fail;
+
+ /*
+ * Point to output device context in dcbaa; skip the output control
+ * context, which is eight 32 bit fields (or 32 bytes long)
+ */
+ xhci->dcbaa->dev_context_ptrs[2*slot_id] =
+ (u32) dev->out_ctx_dma + (32);
+ xhci_dbg(xhci, "Set slot id %d dcbaa entry 0x%x to 0x%x\n",
+ slot_id,
+ (unsigned int) &xhci->dcbaa->dev_context_ptrs[2*slot_id],
+ dev->out_ctx_dma);
+ xhci->dcbaa->dev_context_ptrs[2*slot_id + 1] = 0;
+
+ return 1;
+fail:
+ xhci_free_virt_device(xhci, slot_id);
+ return 0;
+}
+
+/* Setup an xHCI virtual device for a Set Address command */
+int xhci_setup_addressable_virt_dev(struct xhci_hcd *xhci, struct usb_device *udev)
+{
+ struct xhci_virt_device *dev;
+ struct xhci_ep_ctx *ep0_ctx;
+ struct usb_device *top_dev;
+
+ dev = xhci->devs[udev->slot_id];
+ /* Slot ID 0 is reserved */
+ if (udev->slot_id == 0 || !dev) {
+ xhci_warn(xhci, "Slot ID %d is not assigned to this device\n",
+ udev->slot_id);
+ return -EINVAL;
+ }
+ ep0_ctx = &dev->in_ctx->ep[0];
+
+ /* 2) New slot context and endpoint 0 context are valid*/
+ dev->in_ctx->add_flags = SLOT_FLAG | EP0_FLAG;
+
+ /* 3) Only the control endpoint is valid - one endpoint context */
+ dev->in_ctx->slot.dev_info |= LAST_CTX(1);
+
+ switch (udev->speed) {
+ case USB_SPEED_SUPER:
+ dev->in_ctx->slot.dev_info |= (u32) udev->route;
+ dev->in_ctx->slot.dev_info |= (u32) SLOT_SPEED_SS;
+ break;
+ case USB_SPEED_HIGH:
+ dev->in_ctx->slot.dev_info |= (u32) SLOT_SPEED_HS;
+ break;
+ case USB_SPEED_FULL:
+ dev->in_ctx->slot.dev_info |= (u32) SLOT_SPEED_FS;
+ break;
+ case USB_SPEED_LOW:
+ dev->in_ctx->slot.dev_info |= (u32) SLOT_SPEED_LS;
+ break;
+ case USB_SPEED_VARIABLE:
+ xhci_dbg(xhci, "FIXME xHCI doesn't support wireless speeds\n");
+ return -EINVAL;
+ break;
+ default:
+ /* Speed was set earlier, this shouldn't happen. */
+ BUG();
+ }
+ /* Find the root hub port this device is under */
+ for (top_dev = udev; top_dev->parent && top_dev->parent->parent;
+ top_dev = top_dev->parent)
+ /* Found device below root hub */;
+ dev->in_ctx->slot.dev_info2 |= (u32) ROOT_HUB_PORT(top_dev->portnum);
+ xhci_dbg(xhci, "Set root hub portnum to %d\n", top_dev->portnum);
+
+ /* Is this a LS/FS device under a HS hub? */
+ /*
+ * FIXME: I don't think this is right, where does the TT info for the
+ * roothub or parent hub come from?
+ */
+ if ((udev->speed == USB_SPEED_LOW || udev->speed == USB_SPEED_FULL) &&
+ udev->tt) {
+ dev->in_ctx->slot.tt_info = udev->tt->hub->slot_id;
+ dev->in_ctx->slot.tt_info |= udev->ttport << 8;
+ }
+ xhci_dbg(xhci, "udev->tt = 0x%x\n", (unsigned int) udev->tt);
+ xhci_dbg(xhci, "udev->ttport = 0x%x\n", udev->ttport);
+
+ /* Step 4 - ring already allocated */
+ /* Step 5 */
+ ep0_ctx->ep_info2 = EP_TYPE(CTRL_EP);
+ /*
+ * See section 4.3 bullet 6:
+ * The default Max Packet size for ep0 is "8 bytes for a USB2
+ * LS/FS/HS device or 512 bytes for a USB3 SS device"
+ * XXX: Not sure about wireless USB devices.
+ */
+ if (udev->speed == USB_SPEED_SUPER)
+ ep0_ctx->ep_info2 |= MAX_PACKET(512);
+ else
+ ep0_ctx->ep_info2 |= MAX_PACKET(8);
+ /* EP 0 can handle "burst" sizes of 1, so Max Burst Size field is 0 */
+ ep0_ctx->ep_info2 |= MAX_BURST(0);
+ ep0_ctx->ep_info2 |= ERROR_COUNT(3);
+
+ ep0_ctx->deq[0] =
+ dev->ep_rings[0]->first_seg->dma;
+ ep0_ctx->deq[0] |= dev->ep_rings[0]->cycle_state;
+ ep0_ctx->deq[1] = 0;
+
+ /* Steps 7 and 8 were done in xhci_alloc_virt_device() */
+
+ return 0;
+}
+
void xhci_mem_cleanup(struct xhci_hcd *xhci)
{
struct pci_dev *pdev = to_pci_dev(xhci_to_hcd(xhci)->self.controller);
int size;
-
- /* XXX: Free all the segments in the various rings */
+ int i;
/* Free the Event Ring Segment Table and the actual Event Ring */
xhci_writel(xhci, 0, &xhci->ir_set->erst_size);
@@ -218,16 +393,27 @@ void xhci_mem_cleanup(struct xhci_hcd *xhci)
xhci_ring_free(xhci, xhci->cmd_ring);
xhci->cmd_ring = NULL;
xhci_dbg(xhci, "Freed command ring\n");
+
+ for (i = 1; i < MAX_HC_SLOTS; ++i)
+ xhci_free_virt_device(xhci, i);
+
if (xhci->segment_pool)
dma_pool_destroy(xhci->segment_pool);
xhci->segment_pool = NULL;
xhci_dbg(xhci, "Freed segment pool\n");
+
+ if (xhci->device_pool)
+ dma_pool_destroy(xhci->device_pool);
+ xhci->device_pool = NULL;
+ xhci_dbg(xhci, "Freed device context pool\n");
+
xhci_writel(xhci, 0, &xhci->op_regs->dcbaa_ptr[1]);
xhci_writel(xhci, 0, &xhci->op_regs->dcbaa_ptr[0]);
if (xhci->dcbaa)
pci_free_consistent(pdev, sizeof(*xhci->dcbaa),
xhci->dcbaa, xhci->dcbaa->dma);
xhci->dcbaa = NULL;
+
xhci->page_size = 0;
xhci->page_shift = 0;
}
@@ -280,8 +466,8 @@ int xhci_mem_init(struct xhci_hcd *xhci, gfp_t flags)
goto fail;
memset(xhci->dcbaa, 0, sizeof *(xhci->dcbaa));
xhci->dcbaa->dma = dma;
- xhci_dbg(xhci, "// Setting device context base array address to 0x%x\n",
- xhci->dcbaa->dma);
+ xhci_dbg(xhci, "// Device context base array address = 0x%x (DMA), 0x%x (virt)\n",
+ xhci->dcbaa->dma, (unsigned int) xhci->dcbaa);
xhci_writel(xhci, (u32) 0, &xhci->op_regs->dcbaa_ptr[1]);
xhci_writel(xhci, dma, &xhci->op_regs->dcbaa_ptr[0]);
@@ -293,7 +479,12 @@ int xhci_mem_init(struct xhci_hcd *xhci, gfp_t flags)
*/
xhci->segment_pool = dma_pool_create("xHCI ring segments", dev,
SEGMENT_SIZE, 64, xhci->page_size);
- if (!xhci->segment_pool)
+ /* See Table 46 and Note on Figure 55 */
+ /* FIXME support 64-byte contexts */
+ xhci->device_pool = dma_pool_create("xHCI input/output contexts", dev,
+ sizeof(struct xhci_device_control),
+ 64, xhci->page_size);
+ if (!xhci->segment_pool || !xhci->device_pool)
goto fail;
/* Set up the command ring to have one segments for now. */
@@ -385,6 +576,9 @@ int xhci_mem_init(struct xhci_hcd *xhci, gfp_t flags)
* something other than the default (~1ms minimum between interrupts).
* See section 5.5.1.2.
*/
+ init_completion(&xhci->addr_dev);
+ for (i = 0; i < MAX_HC_SLOTS; ++i)
+ xhci->devs[i] = 0;
return 0;
fail: