aboutsummaryrefslogtreecommitdiff
path: root/drivers/usb/host/xhci-ring.c
diff options
context:
space:
mode:
Diffstat (limited to 'drivers/usb/host/xhci-ring.c')
-rw-r--r--drivers/usb/host/xhci-ring.c377
1 files changed, 311 insertions, 66 deletions
diff --git a/drivers/usb/host/xhci-ring.c b/drivers/usb/host/xhci-ring.c
index aa88a067148..173c39c7648 100644
--- a/drivers/usb/host/xhci-ring.c
+++ b/drivers/usb/host/xhci-ring.c
@@ -172,8 +172,9 @@ static void inc_deq(struct xhci_hcd *xhci, struct xhci_ring *ring, bool consumer
* have their chain bit cleared (so that each Link TRB is a separate TD).
*
* Section 6.4.4.1 of the 0.95 spec says link TRBs cannot have the chain bit
- * set, but other sections talk about dealing with the chain bit set.
- * Assume section 6.4.4.1 is wrong, and the chain bit can be set in a Link TRB.
+ * set, but other sections talk about dealing with the chain bit set. This was
+ * fixed in the 0.96 specification errata, but we have to assume that all 0.95
+ * xHCI hardware can't handle the chain bit being cleared on a link TRB.
*/
static void inc_enq(struct xhci_hcd *xhci, struct xhci_ring *ring, bool consumer)
{
@@ -191,8 +192,14 @@ static void inc_enq(struct xhci_hcd *xhci, struct xhci_ring *ring, bool consumer
while (last_trb(xhci, ring, ring->enq_seg, next)) {
if (!consumer) {
if (ring != xhci->event_ring) {
- next->link.control &= ~TRB_CHAIN;
- next->link.control |= chain;
+ /* If we're not dealing with 0.95 hardware,
+ * carry over the chain bit of the previous TRB
+ * (which may mean the chain bit is cleared).
+ */
+ if (!xhci_link_trb_quirk(xhci)) {
+ next->link.control &= ~TRB_CHAIN;
+ next->link.control |= chain;
+ }
/* Give this link TRB to the hardware */
wmb();
if (next->link.control & TRB_CYCLE)
@@ -289,16 +296,18 @@ static void ring_ep_doorbell(struct xhci_hcd *xhci,
unsigned int slot_id,
unsigned int ep_index)
{
- struct xhci_ring *ep_ring;
+ struct xhci_virt_ep *ep;
+ unsigned int ep_state;
u32 field;
__u32 __iomem *db_addr = &xhci->dba->doorbell[slot_id];
- ep_ring = xhci->devs[slot_id]->ep_rings[ep_index];
+ ep = &xhci->devs[slot_id]->eps[ep_index];
+ ep_state = ep->ep_state;
/* Don't ring the doorbell for this endpoint if there are pending
* cancellations because the we don't want to interrupt processing.
*/
- if (!ep_ring->cancels_pending && !(ep_ring->state & SET_DEQ_PENDING)
- && !(ep_ring->state & EP_HALTED)) {
+ if (!ep->cancels_pending && !(ep_state & SET_DEQ_PENDING)
+ && !(ep_state & EP_HALTED)) {
field = xhci_readl(xhci, db_addr) & DB_MASK;
xhci_writel(xhci, field | EPI_TO_DB(ep_index), db_addr);
/* Flush PCI posted writes - FIXME Matthew Wilcox says this
@@ -354,7 +363,7 @@ void xhci_find_new_dequeue_state(struct xhci_hcd *xhci,
struct xhci_td *cur_td, struct xhci_dequeue_state *state)
{
struct xhci_virt_device *dev = xhci->devs[slot_id];
- struct xhci_ring *ep_ring = dev->ep_rings[ep_index];
+ struct xhci_ring *ep_ring = dev->eps[ep_index].ring;
struct xhci_generic_trb *trb;
struct xhci_ep_ctx *ep_ctx;
dma_addr_t addr;
@@ -362,7 +371,7 @@ void xhci_find_new_dequeue_state(struct xhci_hcd *xhci,
state->new_cycle_state = 0;
xhci_dbg(xhci, "Finding segment containing stopped TRB.\n");
state->new_deq_seg = find_trb_seg(cur_td->start_seg,
- ep_ring->stopped_trb,
+ dev->eps[ep_index].stopped_trb,
&state->new_cycle_state);
if (!state->new_deq_seg)
BUG();
@@ -442,9 +451,11 @@ static int queue_set_tr_deq(struct xhci_hcd *xhci, int slot_id,
union xhci_trb *deq_ptr, u32 cycle_state);
void xhci_queue_new_dequeue_state(struct xhci_hcd *xhci,
- struct xhci_ring *ep_ring, unsigned int slot_id,
- unsigned int ep_index, struct xhci_dequeue_state *deq_state)
+ unsigned int slot_id, unsigned int ep_index,
+ struct xhci_dequeue_state *deq_state)
{
+ struct xhci_virt_ep *ep = &xhci->devs[slot_id]->eps[ep_index];
+
xhci_dbg(xhci, "Set TR Deq Ptr cmd, new deq seg = %p (0x%llx dma), "
"new deq ptr = %p (0x%llx dma), new cycle = %u\n",
deq_state->new_deq_seg,
@@ -461,8 +472,7 @@ void xhci_queue_new_dequeue_state(struct xhci_hcd *xhci,
* if the ring is running, and ringing the doorbell starts the
* ring running.
*/
- ep_ring->state |= SET_DEQ_PENDING;
- xhci_ring_cmd_db(xhci);
+ ep->ep_state |= SET_DEQ_PENDING;
}
/*
@@ -481,6 +491,7 @@ static void handle_stopped_endpoint(struct xhci_hcd *xhci,
unsigned int slot_id;
unsigned int ep_index;
struct xhci_ring *ep_ring;
+ struct xhci_virt_ep *ep;
struct list_head *entry;
struct xhci_td *cur_td = 0;
struct xhci_td *last_unlinked_td;
@@ -493,9 +504,10 @@ static void handle_stopped_endpoint(struct xhci_hcd *xhci,
memset(&deq_state, 0, sizeof(deq_state));
slot_id = TRB_TO_SLOT_ID(trb->generic.field[3]);
ep_index = TRB_TO_EP_INDEX(trb->generic.field[3]);
- ep_ring = xhci->devs[slot_id]->ep_rings[ep_index];
+ ep = &xhci->devs[slot_id]->eps[ep_index];
+ ep_ring = ep->ring;
- if (list_empty(&ep_ring->cancelled_td_list))
+ if (list_empty(&ep->cancelled_td_list))
return;
/* Fix up the ep ring first, so HW stops executing cancelled TDs.
@@ -503,7 +515,7 @@ static void handle_stopped_endpoint(struct xhci_hcd *xhci,
* it. We're also in the event handler, so we can't get re-interrupted
* if another Stop Endpoint command completes
*/
- list_for_each(entry, &ep_ring->cancelled_td_list) {
+ list_for_each(entry, &ep->cancelled_td_list) {
cur_td = list_entry(entry, struct xhci_td, cancelled_td_list);
xhci_dbg(xhci, "Cancelling TD starting at %p, 0x%llx (dma).\n",
cur_td->first_trb,
@@ -512,7 +524,7 @@ static void handle_stopped_endpoint(struct xhci_hcd *xhci,
* If we stopped on the TD we need to cancel, then we have to
* move the xHC endpoint ring dequeue pointer past this TD.
*/
- if (cur_td == ep_ring->stopped_td)
+ if (cur_td == ep->stopped_td)
xhci_find_new_dequeue_state(xhci, slot_id, ep_index, cur_td,
&deq_state);
else
@@ -523,14 +535,15 @@ static void handle_stopped_endpoint(struct xhci_hcd *xhci,
* the cancelled TD list for URB completion later.
*/
list_del(&cur_td->td_list);
- ep_ring->cancels_pending--;
+ ep->cancels_pending--;
}
last_unlinked_td = cur_td;
/* If necessary, queue a Set Transfer Ring Dequeue Pointer command */
if (deq_state.new_deq_ptr && deq_state.new_deq_seg) {
- xhci_queue_new_dequeue_state(xhci, ep_ring,
+ xhci_queue_new_dequeue_state(xhci,
slot_id, ep_index, &deq_state);
+ xhci_ring_cmd_db(xhci);
} else {
/* Otherwise just ring the doorbell to restart the ring */
ring_ep_doorbell(xhci, slot_id, ep_index);
@@ -543,7 +556,7 @@ static void handle_stopped_endpoint(struct xhci_hcd *xhci,
* So stop when we've completed the URB for the last TD we unlinked.
*/
do {
- cur_td = list_entry(ep_ring->cancelled_td_list.next,
+ cur_td = list_entry(ep->cancelled_td_list.next,
struct xhci_td, cancelled_td_list);
list_del(&cur_td->cancelled_td_list);
@@ -590,7 +603,7 @@ static void handle_set_deq_completion(struct xhci_hcd *xhci,
slot_id = TRB_TO_SLOT_ID(trb->generic.field[3]);
ep_index = TRB_TO_EP_INDEX(trb->generic.field[3]);
dev = xhci->devs[slot_id];
- ep_ring = dev->ep_rings[ep_index];
+ ep_ring = dev->eps[ep_index].ring;
ep_ctx = xhci_get_ep_ctx(xhci, dev->out_ctx, ep_index);
slot_ctx = xhci_get_slot_ctx(xhci, dev->out_ctx);
@@ -634,7 +647,7 @@ static void handle_set_deq_completion(struct xhci_hcd *xhci,
ep_ctx->deq);
}
- ep_ring->state &= ~SET_DEQ_PENDING;
+ dev->eps[ep_index].ep_state &= ~SET_DEQ_PENDING;
ring_ep_doorbell(xhci, slot_id, ep_index);
}
@@ -644,18 +657,60 @@ static void handle_reset_ep_completion(struct xhci_hcd *xhci,
{
int slot_id;
unsigned int ep_index;
+ struct xhci_ring *ep_ring;
slot_id = TRB_TO_SLOT_ID(trb->generic.field[3]);
ep_index = TRB_TO_EP_INDEX(trb->generic.field[3]);
+ ep_ring = xhci->devs[slot_id]->eps[ep_index].ring;
/* This command will only fail if the endpoint wasn't halted,
* but we don't care.
*/
xhci_dbg(xhci, "Ignoring reset ep completion code of %u\n",
(unsigned int) GET_COMP_CODE(event->status));
- /* Clear our internal halted state and restart the ring */
- xhci->devs[slot_id]->ep_rings[ep_index]->state &= ~EP_HALTED;
- ring_ep_doorbell(xhci, slot_id, ep_index);
+ /* HW with the reset endpoint quirk needs to have a configure endpoint
+ * command complete before the endpoint can be used. Queue that here
+ * because the HW can't handle two commands being queued in a row.
+ */
+ if (xhci->quirks & XHCI_RESET_EP_QUIRK) {
+ xhci_dbg(xhci, "Queueing configure endpoint command\n");
+ xhci_queue_configure_endpoint(xhci,
+ xhci->devs[slot_id]->in_ctx->dma, slot_id,
+ false);
+ xhci_ring_cmd_db(xhci);
+ } else {
+ /* Clear our internal halted state and restart the ring */
+ xhci->devs[slot_id]->eps[ep_index].ep_state &= ~EP_HALTED;
+ ring_ep_doorbell(xhci, slot_id, ep_index);
+ }
+}
+
+/* Check to see if a command in the device's command queue matches this one.
+ * Signal the completion or free the command, and return 1. Return 0 if the
+ * completed command isn't at the head of the command list.
+ */
+static int handle_cmd_in_cmd_wait_list(struct xhci_hcd *xhci,
+ struct xhci_virt_device *virt_dev,
+ struct xhci_event_cmd *event)
+{
+ struct xhci_command *command;
+
+ if (list_empty(&virt_dev->cmd_list))
+ return 0;
+
+ command = list_entry(virt_dev->cmd_list.next,
+ struct xhci_command, cmd_list);
+ if (xhci->cmd_ring->dequeue != command->command_trb)
+ return 0;
+
+ command->status =
+ GET_COMP_CODE(event->status);
+ list_del(&command->cmd_list);
+ if (command->completion)
+ complete(command->completion);
+ else
+ xhci_free_command(xhci, command);
+ return 1;
}
static void handle_cmd_completion(struct xhci_hcd *xhci,
@@ -664,6 +719,11 @@ static void handle_cmd_completion(struct xhci_hcd *xhci,
int slot_id = TRB_TO_SLOT_ID(event->flags);
u64 cmd_dma;
dma_addr_t cmd_dequeue_dma;
+ struct xhci_input_control_ctx *ctrl_ctx;
+ struct xhci_virt_device *virt_dev;
+ unsigned int ep_index;
+ struct xhci_ring *ep_ring;
+ unsigned int ep_state;
cmd_dma = event->cmd_trb;
cmd_dequeue_dma = xhci_trb_virt_to_dma(xhci->cmd_ring->deq_seg,
@@ -691,6 +751,47 @@ static void handle_cmd_completion(struct xhci_hcd *xhci,
xhci_free_virt_device(xhci, slot_id);
break;
case TRB_TYPE(TRB_CONFIG_EP):
+ virt_dev = xhci->devs[slot_id];
+ if (handle_cmd_in_cmd_wait_list(xhci, virt_dev, event))
+ break;
+ /*
+ * Configure endpoint commands can come from the USB core
+ * configuration or alt setting changes, or because the HW
+ * needed an extra configure endpoint command after a reset
+ * endpoint command. In the latter case, the xHCI driver is
+ * not waiting on the configure endpoint command.
+ */
+ ctrl_ctx = xhci_get_input_control_ctx(xhci,
+ virt_dev->in_ctx);
+ /* Input ctx add_flags are the endpoint index plus one */
+ ep_index = xhci_last_valid_endpoint(ctrl_ctx->add_flags) - 1;
+ ep_ring = xhci->devs[slot_id]->eps[ep_index].ring;
+ if (!ep_ring) {
+ /* This must have been an initial configure endpoint */
+ xhci->devs[slot_id]->cmd_status =
+ GET_COMP_CODE(event->status);
+ complete(&xhci->devs[slot_id]->cmd_completion);
+ break;
+ }
+ ep_state = xhci->devs[slot_id]->eps[ep_index].ep_state;
+ xhci_dbg(xhci, "Completed config ep cmd - last ep index = %d, "
+ "state = %d\n", ep_index, ep_state);
+ if (xhci->quirks & XHCI_RESET_EP_QUIRK &&
+ ep_state & EP_HALTED) {
+ /* Clear our internal halted state and restart ring */
+ xhci->devs[slot_id]->eps[ep_index].ep_state &=
+ ~EP_HALTED;
+ ring_ep_doorbell(xhci, slot_id, ep_index);
+ } else {
+ xhci->devs[slot_id]->cmd_status =
+ GET_COMP_CODE(event->status);
+ complete(&xhci->devs[slot_id]->cmd_completion);
+ }
+ break;
+ case TRB_TYPE(TRB_EVAL_CONTEXT):
+ virt_dev = xhci->devs[slot_id];
+ if (handle_cmd_in_cmd_wait_list(xhci, virt_dev, event))
+ break;
xhci->devs[slot_id]->cmd_status = GET_COMP_CODE(event->status);
complete(&xhci->devs[slot_id]->cmd_completion);
break;
@@ -805,7 +906,9 @@ static int handle_tx_event(struct xhci_hcd *xhci,
struct xhci_transfer_event *event)
{
struct xhci_virt_device *xdev;
+ struct xhci_virt_ep *ep;
struct xhci_ring *ep_ring;
+ unsigned int slot_id;
int ep_index;
struct xhci_td *td = 0;
dma_addr_t event_dma;
@@ -814,9 +917,11 @@ static int handle_tx_event(struct xhci_hcd *xhci,
struct urb *urb = 0;
int status = -EINPROGRESS;
struct xhci_ep_ctx *ep_ctx;
+ u32 trb_comp_code;
xhci_dbg(xhci, "In %s\n", __func__);
- xdev = xhci->devs[TRB_TO_SLOT_ID(event->flags)];
+ slot_id = TRB_TO_SLOT_ID(event->flags);
+ xdev = xhci->devs[slot_id];
if (!xdev) {
xhci_err(xhci, "ERROR Transfer event pointed to bad slot\n");
return -ENODEV;
@@ -825,7 +930,8 @@ static int handle_tx_event(struct xhci_hcd *xhci,
/* Endpoint ID is 1 based, our index is zero based */
ep_index = TRB_TO_EP_ID(event->flags) - 1;
xhci_dbg(xhci, "%s - ep index = %d\n", __func__, ep_index);
- ep_ring = xdev->ep_rings[ep_index];
+ ep = &xdev->eps[ep_index];
+ ep_ring = ep->ring;
ep_ctx = xhci_get_ep_ctx(xhci, xdev->out_ctx, ep_index);
if (!ep_ring || (ep_ctx->ep_info & EP_STATE_MASK) == EP_STATE_DISABLED) {
xhci_err(xhci, "ERROR Transfer event pointed to disabled endpoint\n");
@@ -870,7 +976,8 @@ static int handle_tx_event(struct xhci_hcd *xhci,
(unsigned int) event->flags);
/* Look for common error cases */
- switch (GET_COMP_CODE(event->transfer_len)) {
+ trb_comp_code = GET_COMP_CODE(event->transfer_len);
+ switch (trb_comp_code) {
/* Skip codes that require special handling depending on
* transfer type
*/
@@ -885,7 +992,7 @@ static int handle_tx_event(struct xhci_hcd *xhci,
break;
case COMP_STALL:
xhci_warn(xhci, "WARN: Stalled endpoint\n");
- ep_ring->state |= EP_HALTED;
+ ep->ep_state |= EP_HALTED;
status = -EPIPE;
break;
case COMP_TRB_ERR:
@@ -913,7 +1020,7 @@ static int handle_tx_event(struct xhci_hcd *xhci,
/* Was this a control transfer? */
if (usb_endpoint_xfer_control(&td->urb->ep->desc)) {
xhci_debug_trb(xhci, xhci->event_ring->dequeue);
- switch (GET_COMP_CODE(event->transfer_len)) {
+ switch (trb_comp_code) {
case COMP_SUCCESS:
if (event_trb == ep_ring->dequeue) {
xhci_warn(xhci, "WARN: Success on ctrl setup TRB without IOC set??\n");
@@ -928,8 +1035,37 @@ static int handle_tx_event(struct xhci_hcd *xhci,
break;
case COMP_SHORT_TX:
xhci_warn(xhci, "WARN: short transfer on control ep\n");
- status = -EREMOTEIO;
+ if (td->urb->transfer_flags & URB_SHORT_NOT_OK)
+ status = -EREMOTEIO;
+ else
+ status = 0;
break;
+ case COMP_BABBLE:
+ /* The 0.96 spec says a babbling control endpoint
+ * is not halted. The 0.96 spec says it is. Some HW
+ * claims to be 0.95 compliant, but it halts the control
+ * endpoint anyway. Check if a babble halted the
+ * endpoint.
+ */
+ if (ep_ctx->ep_info != EP_STATE_HALTED)
+ break;
+ /* else fall through */
+ case COMP_STALL:
+ /* Did we transfer part of the data (middle) phase? */
+ if (event_trb != ep_ring->dequeue &&
+ event_trb != td->last_trb)
+ td->urb->actual_length =
+ td->urb->transfer_buffer_length
+ - TRB_LEN(event->transfer_len);
+ else
+ td->urb->actual_length = 0;
+
+ ep->stopped_td = td;
+ ep->stopped_trb = event_trb;
+ xhci_queue_reset_ep(xhci, slot_id, ep_index);
+ xhci_cleanup_stalled_ring(xhci, td->urb->dev, ep_index);
+ xhci_ring_cmd_db(xhci);
+ goto td_cleanup;
default:
/* Others already handled above */
break;
@@ -943,7 +1079,10 @@ static int handle_tx_event(struct xhci_hcd *xhci,
if (event_trb == td->last_trb) {
if (td->urb->actual_length != 0) {
/* Don't overwrite a previously set error code */
- if (status == -EINPROGRESS || status == 0)
+ if ((status == -EINPROGRESS ||
+ status == 0) &&
+ (td->urb->transfer_flags
+ & URB_SHORT_NOT_OK))
/* Did we already see a short data stage? */
status = -EREMOTEIO;
} else {
@@ -952,7 +1091,7 @@ static int handle_tx_event(struct xhci_hcd *xhci,
}
} else {
/* Maybe the event was for the data stage? */
- if (GET_COMP_CODE(event->transfer_len) != COMP_STOP_INVAL) {
+ if (trb_comp_code != COMP_STOP_INVAL) {
/* We didn't stop on a link TRB in the middle */
td->urb->actual_length =
td->urb->transfer_buffer_length -
@@ -964,7 +1103,7 @@ static int handle_tx_event(struct xhci_hcd *xhci,
}
}
} else {
- switch (GET_COMP_CODE(event->transfer_len)) {
+ switch (trb_comp_code) {
case COMP_SUCCESS:
/* Double check that the HW transferred everything. */
if (event_trb != td->last_trb) {
@@ -975,7 +1114,12 @@ static int handle_tx_event(struct xhci_hcd *xhci,
else
status = 0;
} else {
- xhci_dbg(xhci, "Successful bulk transfer!\n");
+ if (usb_endpoint_xfer_bulk(&td->urb->ep->desc))
+ xhci_dbg(xhci, "Successful bulk "
+ "transfer!\n");
+ else
+ xhci_dbg(xhci, "Successful interrupt "
+ "transfer!\n");
status = 0;
}
break;
@@ -1001,11 +1145,17 @@ static int handle_tx_event(struct xhci_hcd *xhci,
td->urb->actual_length =
td->urb->transfer_buffer_length -
TRB_LEN(event->transfer_len);
- if (td->urb->actual_length < 0) {
+ if (td->urb->transfer_buffer_length <
+ td->urb->actual_length) {
xhci_warn(xhci, "HC gave bad length "
"of %d bytes left\n",
TRB_LEN(event->transfer_len));
td->urb->actual_length = 0;
+ if (td->urb->transfer_flags &
+ URB_SHORT_NOT_OK)
+ status = -EREMOTEIO;
+ else
+ status = 0;
}
/* Don't overwrite a previously set error code */
if (status == -EINPROGRESS) {
@@ -1041,30 +1191,31 @@ static int handle_tx_event(struct xhci_hcd *xhci,
/* If the ring didn't stop on a Link or No-op TRB, add
* in the actual bytes transferred from the Normal TRB
*/
- if (GET_COMP_CODE(event->transfer_len) != COMP_STOP_INVAL)
+ if (trb_comp_code != COMP_STOP_INVAL)
td->urb->actual_length +=
TRB_LEN(cur_trb->generic.field[2]) -
TRB_LEN(event->transfer_len);
}
}
- if (GET_COMP_CODE(event->transfer_len) == COMP_STOP_INVAL ||
- GET_COMP_CODE(event->transfer_len) == COMP_STOP) {
+ if (trb_comp_code == COMP_STOP_INVAL ||
+ trb_comp_code == COMP_STOP) {
/* The Endpoint Stop Command completion will take care of any
* stopped TDs. A stopped TD may be restarted, so don't update
* the ring dequeue pointer or take this TD off any lists yet.
*/
- ep_ring->stopped_td = td;
- ep_ring->stopped_trb = event_trb;
+ ep->stopped_td = td;
+ ep->stopped_trb = event_trb;
} else {
- if (GET_COMP_CODE(event->transfer_len) == COMP_STALL) {
+ if (trb_comp_code == COMP_STALL ||
+ trb_comp_code == COMP_BABBLE) {
/* The transfer is completed from the driver's
* perspective, but we need to issue a set dequeue
* command for this stalled endpoint to move the dequeue
* pointer past the TD. We can't do that here because
* the halt condition must be cleared first.
*/
- ep_ring->stopped_td = td;
- ep_ring->stopped_trb = event_trb;
+ ep->stopped_td = td;
+ ep->stopped_trb = event_trb;
} else {
/* Update ring dequeue pointer */
while (ep_ring->dequeue != td->last_trb)
@@ -1072,16 +1223,41 @@ static int handle_tx_event(struct xhci_hcd *xhci,
inc_deq(xhci, ep_ring, false);
}
+td_cleanup:
/* Clean up the endpoint's TD list */
urb = td->urb;
+ /* Do one last check of the actual transfer length.
+ * If the host controller said we transferred more data than
+ * the buffer length, urb->actual_length will be a very big
+ * number (since it's unsigned). Play it safe and say we didn't
+ * transfer anything.
+ */
+ if (urb->actual_length > urb->transfer_buffer_length) {
+ xhci_warn(xhci, "URB transfer length is wrong, "
+ "xHC issue? req. len = %u, "
+ "act. len = %u\n",
+ urb->transfer_buffer_length,
+ urb->actual_length);
+ urb->actual_length = 0;
+ if (td->urb->transfer_flags & URB_SHORT_NOT_OK)
+ status = -EREMOTEIO;
+ else
+ status = 0;
+ }
list_del(&td->td_list);
/* Was this TD slated to be cancelled but completed anyway? */
if (!list_empty(&td->cancelled_td_list)) {
list_del(&td->cancelled_td_list);
- ep_ring->cancels_pending--;
+ ep->cancels_pending--;
}
- /* Leave the TD around for the reset endpoint function to use */
- if (GET_COMP_CODE(event->transfer_len) != COMP_STALL) {
+ /* Leave the TD around for the reset endpoint function to use
+ * (but only if it's not a control endpoint, since we already
+ * queued the Set TR dequeue pointer command for stalled
+ * control endpoints).
+ */
+ if (usb_endpoint_xfer_control(&urb->ep->desc) ||
+ (trb_comp_code != COMP_STALL &&
+ trb_comp_code != COMP_BABBLE)) {
kfree(td);
}
urb->hcpriv = NULL;
@@ -1094,7 +1270,7 @@ cleanup:
if (urb) {
usb_hcd_unlink_urb_from_ep(xhci_to_hcd(xhci), urb);
xhci_dbg(xhci, "Giveback URB %p, len = %d, status = %d\n",
- urb, td->urb->actual_length, status);
+ urb, urb->actual_length, status);
spin_unlock(&xhci->lock);
usb_hcd_giveback_urb(xhci_to_hcd(xhci), urb, status);
spin_lock(&xhci->lock);
@@ -1235,7 +1411,7 @@ static int prepare_transfer(struct xhci_hcd *xhci,
{
int ret;
struct xhci_ep_ctx *ep_ctx = xhci_get_ep_ctx(xhci, xdev->out_ctx, ep_index);
- ret = prepare_ring(xhci, xdev->ep_rings[ep_index],
+ ret = prepare_ring(xhci, xdev->eps[ep_index].ring,
ep_ctx->ep_info & EP_STATE_MASK,
num_trbs, mem_flags);
if (ret)
@@ -1255,9 +1431,9 @@ static int prepare_transfer(struct xhci_hcd *xhci,
(*td)->urb = urb;
urb->hcpriv = (void *) (*td);
/* Add this TD to the tail of the endpoint ring's TD list */
- list_add_tail(&(*td)->td_list, &xdev->ep_rings[ep_index]->td_list);
- (*td)->start_seg = xdev->ep_rings[ep_index]->enq_seg;
- (*td)->first_trb = xdev->ep_rings[ep_index]->enqueue;
+ list_add_tail(&(*td)->td_list, &xdev->eps[ep_index].ring->td_list);
+ (*td)->start_seg = xdev->eps[ep_index].ring->enq_seg;
+ (*td)->first_trb = xdev->eps[ep_index].ring->enqueue;
return 0;
}
@@ -1335,6 +1511,47 @@ static void giveback_first_trb(struct xhci_hcd *xhci, int slot_id,
ring_ep_doorbell(xhci, slot_id, ep_index);
}
+/*
+ * xHCI uses normal TRBs for both bulk and interrupt. When the interrupt
+ * endpoint is to be serviced, the xHC will consume (at most) one TD. A TD
+ * (comprised of sg list entries) can take several service intervals to
+ * transmit.
+ */
+int xhci_queue_intr_tx(struct xhci_hcd *xhci, gfp_t mem_flags,
+ struct urb *urb, int slot_id, unsigned int ep_index)
+{
+ struct xhci_ep_ctx *ep_ctx = xhci_get_ep_ctx(xhci,
+ xhci->devs[slot_id]->out_ctx, ep_index);
+ int xhci_interval;
+ int ep_interval;
+
+ xhci_interval = EP_INTERVAL_TO_UFRAMES(ep_ctx->ep_info);
+ ep_interval = urb->interval;
+ /* Convert to microframes */
+ if (urb->dev->speed == USB_SPEED_LOW ||
+ urb->dev->speed == USB_SPEED_FULL)
+ ep_interval *= 8;
+ /* FIXME change this to a warning and a suggestion to use the new API
+ * to set the polling interval (once the API is added).
+ */
+ if (xhci_interval != ep_interval) {
+ if (!printk_ratelimit())
+ dev_dbg(&urb->dev->dev, "Driver uses different interval"
+ " (%d microframe%s) than xHCI "
+ "(%d microframe%s)\n",
+ ep_interval,
+ ep_interval == 1 ? "" : "s",
+ xhci_interval,
+ xhci_interval == 1 ? "" : "s");
+ urb->interval = xhci_interval;
+ /* Convert back to frames for LS/FS devices */
+ if (urb->dev->speed == USB_SPEED_LOW ||
+ urb->dev->speed == USB_SPEED_FULL)
+ urb->interval /= 8;
+ }
+ return xhci_queue_bulk_tx(xhci, GFP_ATOMIC, urb, slot_id, ep_index);
+}
+
static int queue_bulk_sg_tx(struct xhci_hcd *xhci, gfp_t mem_flags,
struct urb *urb, int slot_id, unsigned int ep_index)
{
@@ -1350,7 +1567,7 @@ static int queue_bulk_sg_tx(struct xhci_hcd *xhci, gfp_t mem_flags,
struct xhci_generic_trb *start_trb;
int start_cycle;
- ep_ring = xhci->devs[slot_id]->ep_rings[ep_index];
+ ep_ring = xhci->devs[slot_id]->eps[ep_index].ring;
num_trbs = count_sg_trbs_needed(xhci, urb);
num_sgs = urb->num_sgs;
@@ -1483,7 +1700,7 @@ int xhci_queue_bulk_tx(struct xhci_hcd *xhci, gfp_t mem_flags,
if (urb->sg)
return queue_bulk_sg_tx(xhci, mem_flags, urb, slot_id, ep_index);
- ep_ring = xhci->devs[slot_id]->ep_rings[ep_index];
+ ep_ring = xhci->devs[slot_id]->eps[ep_index].ring;
num_trbs = 0;
/* How much data is (potentially) left before the 64KB boundary? */
@@ -1594,7 +1811,7 @@ int xhci_queue_ctrl_tx(struct xhci_hcd *xhci, gfp_t mem_flags,
u32 field, length_field;
struct xhci_td *td;
- ep_ring = xhci->devs[slot_id]->ep_rings[ep_index];
+ ep_ring = xhci->devs[slot_id]->eps[ep_index].ring;
/*
* Need to copy setup packet into setup TRB, so we can't use the setup
@@ -1677,12 +1894,27 @@ int xhci_queue_ctrl_tx(struct xhci_hcd *xhci, gfp_t mem_flags,
/**** Command Ring Operations ****/
-/* Generic function for queueing a command TRB on the command ring */
-static int queue_command(struct xhci_hcd *xhci, u32 field1, u32 field2, u32 field3, u32 field4)
+/* Generic function for queueing a command TRB on the command ring.
+ * Check to make sure there's room on the command ring for one command TRB.
+ * Also check that there's room reserved for commands that must not fail.
+ * If this is a command that must not fail, meaning command_must_succeed = TRUE,
+ * then only check for the number of reserved spots.
+ * Don't decrement xhci->cmd_ring_reserved_trbs after we've queued the TRB
+ * because the command event handler may want to resubmit a failed command.
+ */
+static int queue_command(struct xhci_hcd *xhci, u32 field1, u32 field2,
+ u32 field3, u32 field4, bool command_must_succeed)
{
- if (!room_on_ring(xhci, xhci->cmd_ring, 1)) {
+ int reserved_trbs = xhci->cmd_ring_reserved_trbs;
+ if (!command_must_succeed)
+ reserved_trbs++;
+
+ if (!room_on_ring(xhci, xhci->cmd_ring, reserved_trbs)) {
if (!in_interrupt())
xhci_err(xhci, "ERR: No room for command on command ring\n");
+ if (command_must_succeed)
+ xhci_err(xhci, "ERR: Reserved TRB counting for "
+ "unfailable commands failed.\n");
return -ENOMEM;
}
queue_trb(xhci, xhci->cmd_ring, false, field1, field2, field3,
@@ -1693,7 +1925,7 @@ static int queue_command(struct xhci_hcd *xhci, u32 field1, u32 field2, u32 fiel
/* Queue a no-op command on the command ring */
static int queue_cmd_noop(struct xhci_hcd *xhci)
{
- return queue_command(xhci, 0, 0, 0, TRB_TYPE(TRB_CMD_NOOP));
+ return queue_command(xhci, 0, 0, 0, TRB_TYPE(TRB_CMD_NOOP), false);
}
/*
@@ -1712,7 +1944,7 @@ void *xhci_setup_one_noop(struct xhci_hcd *xhci)
int xhci_queue_slot_control(struct xhci_hcd *xhci, u32 trb_type, u32 slot_id)
{
return queue_command(xhci, 0, 0, 0,
- TRB_TYPE(trb_type) | SLOT_ID_FOR_TRB(slot_id));
+ TRB_TYPE(trb_type) | SLOT_ID_FOR_TRB(slot_id), false);
}
/* Queue an address device command TRB */
@@ -1721,16 +1953,28 @@ int xhci_queue_address_device(struct xhci_hcd *xhci, dma_addr_t in_ctx_ptr,
{
return queue_command(xhci, lower_32_bits(in_ctx_ptr),
upper_32_bits(in_ctx_ptr), 0,
- TRB_TYPE(TRB_ADDR_DEV) | SLOT_ID_FOR_TRB(slot_id));
+ TRB_TYPE(TRB_ADDR_DEV) | SLOT_ID_FOR_TRB(slot_id),
+ false);
}
/* Queue a configure endpoint command TRB */
int xhci_queue_configure_endpoint(struct xhci_hcd *xhci, dma_addr_t in_ctx_ptr,
+ u32 slot_id, bool command_must_succeed)
+{
+ return queue_command(xhci, lower_32_bits(in_ctx_ptr),
+ upper_32_bits(in_ctx_ptr), 0,
+ TRB_TYPE(TRB_CONFIG_EP) | SLOT_ID_FOR_TRB(slot_id),
+ command_must_succeed);
+}
+
+/* Queue an evaluate context command TRB */
+int xhci_queue_evaluate_context(struct xhci_hcd *xhci, dma_addr_t in_ctx_ptr,
u32 slot_id)
{
return queue_command(xhci, lower_32_bits(in_ctx_ptr),
upper_32_bits(in_ctx_ptr), 0,
- TRB_TYPE(TRB_CONFIG_EP) | SLOT_ID_FOR_TRB(slot_id));
+ TRB_TYPE(TRB_EVAL_CONTEXT) | SLOT_ID_FOR_TRB(slot_id),
+ false);
}
int xhci_queue_stop_endpoint(struct xhci_hcd *xhci, int slot_id,
@@ -1741,7 +1985,7 @@ int xhci_queue_stop_endpoint(struct xhci_hcd *xhci, int slot_id,
u32 type = TRB_TYPE(TRB_STOP_RING);
return queue_command(xhci, 0, 0, 0,
- trb_slot_id | trb_ep_index | type);
+ trb_slot_id | trb_ep_index | type, false);
}
/* Set Transfer Ring Dequeue Pointer command.
@@ -1765,7 +2009,7 @@ static int queue_set_tr_deq(struct xhci_hcd *xhci, int slot_id,
}
return queue_command(xhci, lower_32_bits(addr) | cycle_state,
upper_32_bits(addr), 0,
- trb_slot_id | trb_ep_index | type);
+ trb_slot_id | trb_ep_index | type, false);
}
int xhci_queue_reset_ep(struct xhci_hcd *xhci, int slot_id,
@@ -1775,5 +2019,6 @@ int xhci_queue_reset_ep(struct xhci_hcd *xhci, int slot_id,
u32 trb_ep_index = EP_ID_FOR_TRB(ep_index);
u32 type = TRB_TYPE(TRB_RESET_EP);
- return queue_command(xhci, 0, 0, 0, trb_slot_id | trb_ep_index | type);
+ return queue_command(xhci, 0, 0, 0, trb_slot_id | trb_ep_index | type,
+ false);
}