diff options
Diffstat (limited to 'drivers/usb/input/Kconfig')
| -rw-r--r-- | drivers/usb/input/Kconfig | 225 |
1 files changed, 0 insertions, 225 deletions
diff --git a/drivers/usb/input/Kconfig b/drivers/usb/input/Kconfig deleted file mode 100644 index a792e42f58a..00000000000 --- a/drivers/usb/input/Kconfig +++ /dev/null @@ -1,225 +0,0 @@ -# -# USB Input driver configuration -# -comment "USB Input Devices" - depends on USB - -config USB_AIPTEK - tristate "Aiptek 6000U/8000U tablet support" - depends on USB && INPUT - help - Say Y here if you want to use the USB version of the Aiptek 6000U - or Aiptek 8000U tablet. Make sure to say Y to "Mouse support" - (CONFIG_INPUT_MOUSEDEV) and/or "Event interface support" - (CONFIG_INPUT_EVDEV) as well. - - To compile this driver as a module, choose M here: the - module will be called aiptek. - -config USB_WACOM - tristate "Wacom Intuos/Graphire tablet support" - depends on USB && INPUT - help - Say Y here if you want to use the USB version of the Wacom Intuos - or Graphire tablet. Make sure to say Y to "Mouse support" - (CONFIG_INPUT_MOUSEDEV) and/or "Event interface support" - (CONFIG_INPUT_EVDEV) as well. - - To compile this driver as a module, choose M here: the - module will be called wacom. - -config USB_ACECAD - tristate "Acecad Flair tablet support" - depends on USB && INPUT - help - Say Y here if you want to use the USB version of the Acecad Flair - tablet. Make sure to say Y to "Mouse support" - (CONFIG_INPUT_MOUSEDEV) and/or "Event interface support" - (CONFIG_INPUT_EVDEV) as well. - - To compile this driver as a module, choose M here: the - module will be called acecad. - -config USB_KBTAB - tristate "KB Gear JamStudio tablet support" - depends on USB && INPUT - help - Say Y here if you want to use the USB version of the KB Gear - JamStudio tablet. Make sure to say Y to "Mouse support" - (CONFIG_INPUT_MOUSEDEV) and/or "Event interface support" - (CONFIG_INPUT_EVDEV) as well. - - To compile this driver as a module, choose M here: the - module will be called kbtab. - -config USB_POWERMATE - tristate "Griffin PowerMate and Contour Jog support" - depends on USB && INPUT - ---help--- - Say Y here if you want to use Griffin PowerMate or Contour Jog devices. - These are aluminum dials which can measure clockwise and anticlockwise - rotation. The dial also acts as a pushbutton. The base contains an LED - which can be instructed to pulse or to switch to a particular intensity. - - You can download userspace tools from - <http://sowerbutts.com/powermate/>. - - To compile this driver as a module, choose M here: the - module will be called powermate. - -config USB_TOUCHSCREEN - tristate "USB Touchscreen Driver" - depends on USB && INPUT - ---help--- - USB Touchscreen driver for: - - eGalax Touchkit USB (also includes eTurboTouch CT-410/510/700) - - PanJit TouchSet USB - - 3M MicroTouch USB (EX II series) - - ITM - - some other eTurboTouch - - Gunze AHL61 - - DMC TSC-10/25 - - Have a look at <http://linux.chapter7.ch/touchkit/> for - a usage description and the required user-space stuff. - - To compile this driver as a module, choose M here: the - module will be called usbtouchscreen. - -config USB_TOUCHSCREEN_EGALAX - default y - bool "eGalax, eTurboTouch CT-410/510/700 device support" if EMBEDDED - depends on USB_TOUCHSCREEN - -config USB_TOUCHSCREEN_PANJIT - default y - bool "PanJit device support" if EMBEDDED - depends on USB_TOUCHSCREEN - -config USB_TOUCHSCREEN_3M - default y - bool "3M/Microtouch EX II series device support" if EMBEDDED - depends on USB_TOUCHSCREEN - -config USB_TOUCHSCREEN_ITM - default y - bool "ITM device support" if EMBEDDED - depends on USB_TOUCHSCREEN - -config USB_TOUCHSCREEN_ETURBO - default y - bool "eTurboTouch (non-eGalax compatible) device support" if EMBEDDED - depends on USB_TOUCHSCREEN - -config USB_TOUCHSCREEN_GUNZE - default y - bool "Gunze AHL61 device support" if EMBEDDED - depends on USB_TOUCHSCREEN - -config USB_TOUCHSCREEN_DMC_TSC10 - default y - bool "DMC TSC-10/25 device support" if EMBEDDED - depends on USB_TOUCHSCREEN - -config USB_YEALINK - tristate "Yealink usb-p1k voip phone" - depends on USB && INPUT && EXPERIMENTAL - ---help--- - Say Y here if you want to enable keyboard and LCD functions of the - Yealink usb-p1k usb phones. The audio part is enabled by the generic - usb sound driver, so you might want to enable that as well. - - For information about how to use these additional functions, see - <file:Documentation/input/yealink.txt>. - - To compile this driver as a module, choose M here: the module will be - called yealink. - -config USB_XPAD - tristate "X-Box gamepad support" - depends on USB && INPUT - ---help--- - Say Y here if you want to use the X-Box pad with your computer. - Make sure to say Y to "Joystick support" (CONFIG_INPUT_JOYDEV) - and/or "Event interface support" (CONFIG_INPUT_EVDEV) as well. - - For information about how to connect the X-Box pad to USB, see - <file:Documentation/input/xpad.txt>. - - To compile this driver as a module, choose M here: the - module will be called xpad. - -config USB_ATI_REMOTE - tristate "ATI / X10 USB RF remote control" - depends on USB && INPUT - ---help--- - Say Y here if you want to use an ATI or X10 "Lola" USB remote control. - These are RF remotes with USB receivers. - The ATI remote comes with many of ATI's All-In-Wonder video cards. - The X10 "Lola" remote is available at: - <http://www.x10.com/products/lola_sg1.htm> - This driver provides mouse pointer, left and right mouse buttons, - and maps all the other remote buttons to keypress events. - - To compile this driver as a module, choose M here: the module will be - called ati_remote. - -config USB_ATI_REMOTE2 - tristate "ATI / Philips USB RF remote control" - depends on USB && INPUT - ---help--- - Say Y here if you want to use an ATI or Philips USB RF remote control. - These are RF remotes with USB receivers. - ATI Remote Wonder II comes with some ATI's All-In-Wonder video cards - and is also available as a separate product. - This driver provides mouse pointer, left and right mouse buttons, - and maps all the other remote buttons to keypress events. - - To compile this driver as a module, choose M here: the module will be - called ati_remote2. - -config USB_KEYSPAN_REMOTE - tristate "Keyspan DMR USB remote control (EXPERIMENTAL)" - depends on USB && INPUT && EXPERIMENTAL - ---help--- - Say Y here if you want to use a Keyspan DMR USB remote control. - Currently only the UIA-11 type of receiver has been tested. The tag - on the receiver that connects to the USB port should have a P/N that - will tell you what type of DMR you have. The UIA-10 type is not - supported at this time. This driver maps all buttons to keypress - events. - - To compile this driver as a module, choose M here: the module will - be called keyspan_remote. - -config USB_APPLETOUCH - tristate "Apple USB Touchpad support" - depends on USB && INPUT - ---help--- - Say Y here if you want to use an Apple USB Touchpad. - - These are the touchpads that can be found on post-February 2005 - Apple Powerbooks (prior models have a Synaptics touchpad connected - to the ADB bus). - - This driver provides a basic mouse driver but can be interfaced - with the synaptics X11 driver to provide acceleration and - scrolling in X11. - - For further information, see - <file:Documentation/input/appletouch.txt>. - - To compile this driver as a module, choose M here: the - module will be called appletouch. - -config USB_GTCO - tristate "GTCO CalComp/InterWrite USB Support" - depends on USB && INPUT - ---help--- - Say Y here if you want to use the USB version of the GTCO - CalComp/InterWrite Tablet. Make sure to say Y to "Mouse support" - (CONFIG_INPUT_MOUSEDEV) and/or "Event interface support" - (CONFIG_INPUT_EVDEV) as well. - - To compile this driver as a module, choose M here: the - module will be called gtco. |