diff options
Diffstat (limited to 'drivers/usb')
52 files changed, 2251 insertions, 873 deletions
diff --git a/drivers/usb/Makefile b/drivers/usb/Makefile index d79cd218a55..df014c2a7c5 100644 --- a/drivers/usb/Makefile +++ b/drivers/usb/Makefile @@ -65,12 +65,14 @@ obj-$(CONFIG_USB_EMI26) += misc/ obj-$(CONFIG_USB_EMI62) += misc/ obj-$(CONFIG_USB_IDMOUSE) += misc/ obj-$(CONFIG_USB_LCD) += misc/ +obj-$(CONFIG_USB_LD) += misc/ obj-$(CONFIG_USB_LED) += misc/ obj-$(CONFIG_USB_LEGOTOWER) += misc/ obj-$(CONFIG_USB_RIO500) += misc/ obj-$(CONFIG_USB_TEST) += misc/ obj-$(CONFIG_USB_USS720) += misc/ obj-$(CONFIG_USB_PHIDGETSERVO) += misc/ +obj-$(CONFIG_USB_SISUSBVGA) += misc/ obj-$(CONFIG_USB_ATM) += atm/ obj-$(CONFIG_USB_SPEEDTOUCH) += atm/ diff --git a/drivers/usb/atm/cxacru.c b/drivers/usb/atm/cxacru.c index cbd4a7d25d0..8e184e2641c 100644 --- a/drivers/usb/atm/cxacru.c +++ b/drivers/usb/atm/cxacru.c @@ -427,7 +427,7 @@ static void cxacru_poll_status(struct cxacru_data *instance) atm_dev->link_rate = buf[CXINF_DOWNSTREAM_RATE] * 1000 / 424; atm_dev->signal = ATM_PHY_SIG_FOUND; - dev_info(dev, "ADSL line: up (%d Kib/s down | %d Kib/s up)\n", + dev_info(dev, "ADSL line: up (%d kb/s down | %d kb/s up)\n", buf[CXINF_DOWNSTREAM_RATE], buf[CXINF_UPSTREAM_RATE]); break; diff --git a/drivers/usb/atm/speedtch.c b/drivers/usb/atm/speedtch.c index 6a6eaa2a3b1..d0cbbb7f038 100644 --- a/drivers/usb/atm/speedtch.c +++ b/drivers/usb/atm/speedtch.c @@ -100,6 +100,8 @@ struct speedtch_instance_data { struct work_struct status_checker; + unsigned char last_status; + int poll_delay; /* milliseconds */ struct timer_list resubmit_timer; @@ -423,52 +425,48 @@ static void speedtch_check_status(struct speedtch_instance_data *instance) struct usbatm_data *usbatm = instance->usbatm; struct atm_dev *atm_dev = usbatm->atm_dev; unsigned char *buf = instance->scratch_buffer; - int ret; + int down_speed, up_speed, ret; + unsigned char status; atm_dbg(usbatm, "%s entered\n", __func__); ret = speedtch_read_status(instance); if (ret < 0) { atm_warn(usbatm, "error %d fetching device status\n", ret); - if (instance->poll_delay < MAX_POLL_DELAY) - instance->poll_delay *= 2; + instance->poll_delay = min(2 * instance->poll_delay, MAX_POLL_DELAY); return; } - if (instance->poll_delay > MIN_POLL_DELAY) - instance->poll_delay /= 2; + instance->poll_delay = max(instance->poll_delay / 2, MIN_POLL_DELAY); - atm_dbg(usbatm, "%s: line state %02x\n", __func__, buf[OFFSET_7]); + status = buf[OFFSET_7]; - switch (buf[OFFSET_7]) { - case 0: - if (atm_dev->signal != ATM_PHY_SIG_LOST) { + atm_dbg(usbatm, "%s: line state %02x\n", __func__, status); + + if ((status != instance->last_status) || !status) { + switch (status) { + case 0: atm_dev->signal = ATM_PHY_SIG_LOST; - atm_info(usbatm, "ADSL line is down\n"); - /* It'll never resync again unless we ask it to... */ + if (instance->last_status) + atm_info(usbatm, "ADSL line is down\n"); + /* It may never resync again unless we ask it to... */ ret = speedtch_start_synchro(instance); - } - break; + break; - case 0x08: - if (atm_dev->signal != ATM_PHY_SIG_UNKNOWN) { + case 0x08: atm_dev->signal = ATM_PHY_SIG_UNKNOWN; atm_info(usbatm, "ADSL line is blocked?\n"); - } - break; + break; - case 0x10: - if (atm_dev->signal != ATM_PHY_SIG_LOST) { + case 0x10: atm_dev->signal = ATM_PHY_SIG_LOST; atm_info(usbatm, "ADSL line is synchronising\n"); - } - break; + break; - case 0x20: - if (atm_dev->signal != ATM_PHY_SIG_FOUND) { - int down_speed = buf[OFFSET_b] | (buf[OFFSET_b + 1] << 8) + case 0x20: + down_speed = buf[OFFSET_b] | (buf[OFFSET_b + 1] << 8) | (buf[OFFSET_b + 2] << 16) | (buf[OFFSET_b + 3] << 24); - int up_speed = buf[OFFSET_b + 4] | (buf[OFFSET_b + 5] << 8) + up_speed = buf[OFFSET_b + 4] | (buf[OFFSET_b + 5] << 8) | (buf[OFFSET_b + 6] << 16) | (buf[OFFSET_b + 7] << 24); if (!(down_speed & 0x0000ffff) && !(up_speed & 0x0000ffff)) { @@ -480,17 +478,17 @@ static void speedtch_check_status(struct speedtch_instance_data *instance) atm_dev->signal = ATM_PHY_SIG_FOUND; atm_info(usbatm, - "ADSL line is up (%d Kib/s down | %d Kib/s up)\n", + "ADSL line is up (%d kb/s down | %d kb/s up)\n", down_speed, up_speed); - } - break; + break; - default: - if (atm_dev->signal != ATM_PHY_SIG_UNKNOWN) { + default: atm_dev->signal = ATM_PHY_SIG_UNKNOWN; - atm_info(usbatm, "Unknown line state %02x\n", buf[OFFSET_7]); + atm_info(usbatm, "Unknown line state %02x\n", status); + break; } - break; + + instance->last_status = status; } } @@ -730,6 +728,7 @@ static int speedtch_bind(struct usbatm_data *usbatm, instance->status_checker.timer.function = speedtch_status_poll; instance->status_checker.timer.data = (unsigned long)instance; + instance->last_status = 0xff; instance->poll_delay = MIN_POLL_DELAY; init_timer(&instance->resubmit_timer); diff --git a/drivers/usb/class/cdc-acm.c b/drivers/usb/class/cdc-acm.c index 69e859e0f51..adff5a77e31 100644 --- a/drivers/usb/class/cdc-acm.c +++ b/drivers/usb/class/cdc-acm.c @@ -422,6 +422,17 @@ bail_out: return -EIO; } +static void acm_tty_unregister(struct acm *acm) +{ + tty_unregister_device(acm_tty_driver, acm->minor); + usb_put_intf(acm->control); + acm_table[acm->minor] = NULL; + usb_free_urb(acm->ctrlurb); + usb_free_urb(acm->readurb); + usb_free_urb(acm->writeurb); + kfree(acm); +} + static void acm_tty_close(struct tty_struct *tty, struct file *filp) { struct acm *acm = tty->driver_data; @@ -436,14 +447,8 @@ static void acm_tty_close(struct tty_struct *tty, struct file *filp) usb_kill_urb(acm->ctrlurb); usb_kill_urb(acm->writeurb); usb_kill_urb(acm->readurb); - } else { - tty_unregister_device(acm_tty_driver, acm->minor); - acm_table[acm->minor] = NULL; - usb_free_urb(acm->ctrlurb); - usb_free_urb(acm->readurb); - usb_free_urb(acm->writeurb); - kfree(acm); - } + } else + acm_tty_unregister(acm); } up(&open_sem); } @@ -905,7 +910,8 @@ skip_normal_probe: usb_driver_claim_interface(&acm_driver, data_interface, acm); - tty_register_device(acm_tty_driver, minor, &intf->dev); + usb_get_intf(control_interface); + tty_register_device(acm_tty_driver, minor, &control_interface->dev); acm_table[minor] = acm; usb_set_intfdata (intf, acm); @@ -954,12 +960,7 @@ static void acm_disconnect(struct usb_interface *intf) usb_driver_release_interface(&acm_driver, acm->data); if (!acm->used) { - tty_unregister_device(acm_tty_driver, acm->minor); - acm_table[acm->minor] = NULL; - usb_free_urb(acm->ctrlurb); - usb_free_urb(acm->readurb); - usb_free_urb(acm->writeurb); - kfree(acm); + acm_tty_unregister(acm); up(&open_sem); return; } diff --git a/drivers/usb/core/buffer.c b/drivers/usb/core/buffer.c index b7827df21f4..fc15b4acc8a 100644 --- a/drivers/usb/core/buffer.c +++ b/drivers/usb/core/buffer.c @@ -106,7 +106,7 @@ void hcd_buffer_destroy (struct usb_hcd *hcd) void *hcd_buffer_alloc ( struct usb_bus *bus, size_t size, - int mem_flags, + unsigned mem_flags, dma_addr_t *dma ) { diff --git a/drivers/usb/core/hcd-pci.c b/drivers/usb/core/hcd-pci.c index 71b4a8d6631..fc056062c96 100644 --- a/drivers/usb/core/hcd-pci.c +++ b/drivers/usb/core/hcd-pci.c @@ -380,6 +380,7 @@ int usb_hcd_pci_resume (struct pci_dev *dev) usb_hc_died (hcd); } + pci_enable_device(dev); return retval; } EXPORT_SYMBOL (usb_hcd_pci_resume); diff --git a/drivers/usb/core/hcd.c b/drivers/usb/core/hcd.c index 83e732a0d64..8616356f55e 100644 --- a/drivers/usb/core/hcd.c +++ b/drivers/usb/core/hcd.c @@ -1112,7 +1112,7 @@ static void urb_unlink (struct urb *urb) * expects usb_submit_urb() to have sanity checked and conditioned all * inputs in the urb */ -static int hcd_submit_urb (struct urb *urb, int mem_flags) +static int hcd_submit_urb (struct urb *urb, unsigned mem_flags) { int status; struct usb_hcd *hcd = urb->dev->bus->hcpriv; diff --git a/drivers/usb/core/hcd.h b/drivers/usb/core/hcd.h index 8dc13cde2f7..67db4a999b9 100644 --- a/drivers/usb/core/hcd.h +++ b/drivers/usb/core/hcd.h @@ -142,12 +142,12 @@ struct hcd_timeout { /* timeouts we allocate */ struct usb_operations { int (*get_frame_number) (struct usb_device *usb_dev); - int (*submit_urb) (struct urb *urb, int mem_flags); + int (*submit_urb) (struct urb *urb, unsigned mem_flags); int (*unlink_urb) (struct urb *urb, int status); /* allocate dma-consistent buffer for URB_DMA_NOMAPPING */ void *(*buffer_alloc)(struct usb_bus *bus, size_t size, - int mem_flags, + unsigned mem_flags, dma_addr_t *dma); void (*buffer_free)(struct usb_bus *bus, size_t size, void *addr, dma_addr_t dma); @@ -200,7 +200,7 @@ struct hc_driver { int (*urb_enqueue) (struct usb_hcd *hcd, struct usb_host_endpoint *ep, struct urb *urb, - int mem_flags); + unsigned mem_flags); int (*urb_dequeue) (struct usb_hcd *hcd, struct urb *urb); /* hw synch, freeing endpoint resources that urb_dequeue can't */ @@ -247,7 +247,7 @@ int hcd_buffer_create (struct usb_hcd *hcd); void hcd_buffer_destroy (struct usb_hcd *hcd); void *hcd_buffer_alloc (struct usb_bus *bus, size_t size, - int mem_flags, dma_addr_t *dma); + unsigned mem_flags, dma_addr_t *dma); void hcd_buffer_free (struct usb_bus *bus, size_t size, void *addr, dma_addr_t dma); diff --git a/drivers/usb/core/hub.c b/drivers/usb/core/hub.c index 32ff3218185..c3e46d24a37 100644 --- a/drivers/usb/core/hub.c +++ b/drivers/usb/core/hub.c @@ -26,6 +26,7 @@ #include <linux/ioctl.h> #include <linux/usb.h> #include <linux/usbdevice_fs.h> +#include <linux/kthread.h> #include <asm/semaphore.h> #include <asm/uaccess.h> @@ -47,8 +48,7 @@ static LIST_HEAD(hub_event_list); /* List of hubs needing servicing */ /* Wakes up khubd */ static DECLARE_WAIT_QUEUE_HEAD(khubd_wait); -static pid_t khubd_pid = 0; /* PID of khubd */ -static DECLARE_COMPLETION(khubd_exited); +static struct task_struct *khubd_task; /* cycle leds on hubs that aren't blinking for attention */ static int blinkenlights = 0; @@ -2807,23 +2807,16 @@ loop: static int hub_thread(void *__unused) { - /* - * This thread doesn't need any user-level access, - * so get rid of all our resources - */ - - daemonize("khubd"); - allow_signal(SIGKILL); - - /* Send me a signal to get me die (for debugging) */ do { hub_events(); - wait_event_interruptible(khubd_wait, !list_empty(&hub_event_list)); + wait_event_interruptible(khubd_wait, + !list_empty(&hub_event_list) || + kthread_should_stop()); try_to_freeze(); - } while (!signal_pending(current)); + } while (!kthread_should_stop() || !list_empty(&hub_event_list)); - pr_debug ("%s: khubd exiting\n", usbcore_name); - complete_and_exit(&khubd_exited, 0); + pr_debug("%s: khubd exiting\n", usbcore_name); + return 0; } static struct usb_device_id hub_id_table [] = { @@ -2849,20 +2842,15 @@ static struct usb_driver hub_driver = { int usb_hub_init(void) { - pid_t pid; - if (usb_register(&hub_driver) < 0) { printk(KERN_ERR "%s: can't register hub driver\n", usbcore_name); return -1; } - pid = kernel_thread(hub_thread, NULL, CLONE_KERNEL); - if (pid >= 0) { - khubd_pid = pid; - + khubd_task = kthread_run(hub_thread, NULL, "khubd"); + if (!IS_ERR(khubd_task)) return 0; - } /* Fall through if kernel_thread failed */ usb_deregister(&hub_driver); @@ -2873,12 +2861,7 @@ int usb_hub_init(void) void usb_hub_cleanup(void) { - int ret; - - /* Kill the thread */ - ret = kill_proc(khubd_pid, SIGKILL, 1); - - wait_for_completion(&khubd_exited); + kthread_stop(khubd_task); /* * Hub resources are freed for us by usb_deregister. It calls @@ -2890,7 +2873,6 @@ void usb_hub_cleanup(void) usb_deregister(&hub_driver); } /* usb_hub_cleanup() */ - static int config_descriptors_changed(struct usb_device *udev) { unsigned index; diff --git a/drivers/usb/core/message.c b/drivers/usb/core/message.c index f50aaf25c98..a428ef479bd 100644 --- a/drivers/usb/core/message.c +++ b/drivers/usb/core/message.c @@ -320,7 +320,7 @@ int usb_sg_init ( struct scatterlist *sg, int nents, size_t length, - int mem_flags + unsigned mem_flags ) { int i; diff --git a/drivers/usb/core/sysfs.c b/drivers/usb/core/sysfs.c index 740cb4c668d..00297f11384 100644 --- a/drivers/usb/core/sysfs.c +++ b/drivers/usb/core/sysfs.c @@ -196,6 +196,7 @@ usb_descriptor_attr (bDeviceClass, "%02x\n") usb_descriptor_attr (bDeviceSubClass, "%02x\n") usb_descriptor_attr (bDeviceProtocol, "%02x\n") usb_descriptor_attr (bNumConfigurations, "%d\n") +usb_descriptor_attr (bMaxPacketSize0, "%d\n") static struct attribute *dev_attrs[] = { /* current configuration's attributes */ @@ -211,6 +212,7 @@ static struct attribute *dev_attrs[] = { &dev_attr_bDeviceSubClass.attr, &dev_attr_bDeviceProtocol.attr, &dev_attr_bNumConfigurations.attr, + &dev_attr_bMaxPacketSize0.attr, &dev_attr_speed.attr, &dev_attr_devnum.attr, &dev_attr_version.attr, diff --git a/drivers/usb/core/urb.c b/drivers/usb/core/urb.c index 0faf18d511d..c0feee25ff0 100644 --- a/drivers/usb/core/urb.c +++ b/drivers/usb/core/urb.c @@ -60,7 +60,7 @@ void usb_init_urb(struct urb *urb) * * The driver must call usb_free_urb() when it is finished with the urb. */ -struct urb *usb_alloc_urb(int iso_packets, int mem_flags) +struct urb *usb_alloc_urb(int iso_packets, unsigned mem_flags) { struct urb *urb; @@ -224,7 +224,7 @@ struct urb * usb_get_urb(struct urb *urb) * GFP_NOIO, unless b) or c) apply * */ -int usb_submit_urb(struct urb *urb, int mem_flags) +int usb_submit_urb(struct urb *urb, unsigned mem_flags) { int pipe, temp, max; struct usb_device *dev; diff --git a/drivers/usb/core/usb.c b/drivers/usb/core/usb.c index a3c42203213..99c85d2f92d 100644 --- a/drivers/usb/core/usb.c +++ b/drivers/usb/core/usb.c @@ -1129,7 +1129,7 @@ int __usb_get_extra_descriptor(char *buffer, unsigned size, void *usb_buffer_alloc ( struct usb_device *dev, size_t size, - int mem_flags, + unsigned mem_flags, dma_addr_t *dma ) { @@ -1532,6 +1532,9 @@ EXPORT_SYMBOL(usb_register); EXPORT_SYMBOL(usb_deregister); EXPORT_SYMBOL(usb_disabled); +EXPORT_SYMBOL_GPL(usb_get_intf); +EXPORT_SYMBOL_GPL(usb_put_intf); + EXPORT_SYMBOL(usb_alloc_dev); EXPORT_SYMBOL(usb_put_dev); EXPORT_SYMBOL(usb_get_dev); diff --git a/drivers/usb/gadget/dummy_hcd.c b/drivers/usb/gadget/dummy_hcd.c index 4d692670f28..583db7c38cf 100644 --- a/drivers/usb/gadget/dummy_hcd.c +++ b/drivers/usb/gadget/dummy_hcd.c @@ -470,7 +470,7 @@ static int dummy_disable (struct usb_ep *_ep) } static struct usb_request * -dummy_alloc_request (struct usb_ep *_ep, int mem_flags) +dummy_alloc_request (struct usb_ep *_ep, unsigned mem_flags) { struct dummy_ep *ep; struct dummy_request *req; @@ -507,7 +507,7 @@ dummy_alloc_buffer ( struct usb_ep *_ep, unsigned bytes, dma_addr_t *dma, - int mem_flags + unsigned mem_flags ) { char *retval; struct dummy_ep *ep; @@ -540,7 +540,8 @@ fifo_complete (struct usb_ep *ep, struct usb_request *req) } static int -dummy_queue (struct usb_ep *_ep, struct usb_request *_req, int mem_flags) +dummy_queue (struct usb_ep *_ep, struct usb_request *_req, + unsigned mem_flags) { struct dummy_ep *ep; struct dummy_request *req; @@ -998,7 +999,7 @@ static int dummy_urb_enqueue ( struct usb_hcd *hcd, struct usb_host_endpoint *ep, struct urb *urb, - int mem_flags + unsigned mem_flags ) { struct dummy *dum; struct urbp *urbp; diff --git a/drivers/usb/gadget/ether.c b/drivers/usb/gadget/ether.c index 5bb53ae8896..8509e955007 100644 --- a/drivers/usb/gadget/ether.c +++ b/drivers/usb/gadget/ether.c @@ -945,15 +945,16 @@ config_buf (enum usb_device_speed speed, /*-------------------------------------------------------------------------*/ -static void eth_start (struct eth_dev *dev, int gfp_flags); -static int alloc_requests (struct eth_dev *dev, unsigned n, int gfp_flags); +static void eth_start (struct eth_dev *dev, unsigned gfp_flags); +static int alloc_requests (struct eth_dev *dev, unsigned n, unsigned gfp_flags); static int -set_ether_config (struct eth_dev *dev, int gfp_flags) +set_ether_config (struct eth_dev *dev, unsigned gfp_flags) { int result = 0; struct usb_gadget *gadget = dev->gadget; +#if defined(DEV_CONFIG_CDC) || defined(CONFIG_USB_ETH_RNDIS) /* status endpoint used for RNDIS and (optionally) CDC */ if (!subset_active(dev) && dev->status_ep) { dev->status = ep_desc (gadget, &hs_status_desc, @@ -967,6 +968,7 @@ set_ether_config (struct eth_dev *dev, int gfp_flags) goto done; } } +#endif dev->in = ep_desc (dev->gadget, &hs_source_desc, &fs_source_desc); dev->in_ep->driver_data = dev; @@ -1079,7 +1081,7 @@ static void eth_reset_config (struct eth_dev *dev) * that returns config descriptors, and altsetting code. */ static int -eth_set_config (struct eth_dev *dev, unsigned number, int gfp_flags) +eth_set_config (struct eth_dev *dev, unsigned number, unsigned gfp_flags) { int result = 0; struct usb_gadget *gadget = dev->gadget; @@ -1596,7 +1598,7 @@ static void defer_kevent (struct eth_dev *dev, int flag) static void rx_complete (struct usb_ep *ep, struct usb_request *req); static int -rx_submit (struct eth_dev *dev, struct usb_request *req, int gfp_flags) +rx_submit (struct eth_dev *dev, struct usb_request *req, unsigned gfp_flags) { struct sk_buff *skb; int retval = -ENOMEM; @@ -1722,7 +1724,7 @@ clean: } static int prealloc (struct list_head *list, struct usb_ep *ep, - unsigned n, int gfp_flags) + unsigned n, unsigned gfp_flags) { unsigned i; struct usb_request *req; @@ -1761,7 +1763,7 @@ extra: return 0; } -static int alloc_requests (struct eth_dev *dev, unsigned n, int gfp_flags) +static int alloc_requests (struct eth_dev *dev, unsigned n, unsigned gfp_flags) { int status; @@ -1777,7 +1779,7 @@ fail: return status; } -static void rx_fill (struct eth_dev *dev, int gfp_flags) +static void rx_fill (struct eth_dev *dev, unsigned gfp_flags) { struct usb_request *req; unsigned long flags; @@ -2022,7 +2024,7 @@ static int rndis_control_ack (struct net_device *net) #endif /* RNDIS */ -static void eth_start (struct eth_dev *dev, int gfp_flags) +static void eth_start (struct eth_dev *dev, unsigned gfp_flags) { DEBUG (dev, "%s\n", __FUNCTION__); @@ -2428,7 +2430,7 @@ autoconf_fail: dev->req->complete = eth_setup_complete; /* ... and maybe likewise for status transfer */ -#ifdef DEV_CONFIG_CDC +#if defined(DEV_CONFIG_CDC) || defined(CONFIG_USB_ETH_RNDIS) if (dev->status_ep) { dev->stat_req = eth_req_alloc (dev->status_ep, STATUS_BYTECOUNT, GFP_KERNEL); diff --git a/drivers/usb/gadget/goku_udc.c b/drivers/usb/gadget/goku_udc.c index ed773a9111d..eaab26f4ed3 100644 --- a/drivers/usb/gadget/goku_udc.c +++ b/drivers/usb/gadget/goku_udc.c @@ -269,7 +269,7 @@ static int goku_ep_disable(struct usb_ep *_ep) /*-------------------------------------------------------------------------*/ static struct usb_request * -goku_alloc_request(struct usb_ep *_ep, int gfp_flags) +goku_alloc_request(struct usb_ep *_ep, unsigned gfp_flags) { struct goku_request *req; @@ -327,7 +327,7 @@ goku_free_request(struct usb_ep *_ep, struct usb_request *_req) */ static void * goku_alloc_buffer(struct usb_ep *_ep, unsigned bytes, - dma_addr_t *dma, int gfp_flags) + dma_addr_t *dma, unsigned gfp_flags) { void *retval; struct goku_ep *ep; @@ -789,7 +789,7 @@ finished: /*-------------------------------------------------------------------------*/ static int -goku_queue(struct usb_ep *_ep, struct usb_request *_req, int gfp_flags) +goku_queue(struct usb_ep *_ep, struct usb_request *_req, unsigned gfp_flags) { struct goku_request *req; struct goku_ep *ep; diff --git a/drivers/usb/gadget/lh7a40x_udc.c b/drivers/usb/gadget/lh7a40x_udc.c index df75ab65a5e..4842577789c 100644 --- a/drivers/usb/gadget/lh7a40x_udc.c +++ b/drivers/usb/gadget/lh7a40x_udc.c @@ -1106,7 +1106,7 @@ static int lh7a40x_ep_disable(struct usb_ep *_ep) } static struct usb_request *lh7a40x_alloc_request(struct usb_ep *ep, - int gfp_flags) + unsigned gfp_flags) { struct lh7a40x_request *req; @@ -1134,7 +1134,7 @@ static void lh7a40x_free_request(struct usb_ep *ep, struct usb_request *_req) } static void *lh7a40x_alloc_buffer(struct usb_ep *ep, unsigned bytes, - dma_addr_t * dma, int gfp_flags) + dma_addr_t * dma, unsigned gfp_flags) { char *retval; @@ -1158,7 +1158,7 @@ static void lh7a40x_free_buffer(struct usb_ep *ep, void *buf, dma_addr_t dma, * NOTE: Sets INDEX register */ static int lh7a40x_queue(struct usb_ep *_ep, struct usb_request *_req, - int gfp_flags) + unsigned gfp_flags) { struct lh7a40x_request *req; struct lh7a40x_ep *ep; diff --git a/drivers/usb/gadget/net2280.c b/drivers/usb/gadget/net2280.c index 13a3dbc9949..477fab2e74d 100644 --- a/drivers/usb/gadget/net2280.c +++ b/drivers/usb/gadget/net2280.c @@ -376,7 +376,7 @@ static int net2280_disable (struct usb_ep *_ep) /*-------------------------------------------------------------------------*/ static struct usb_request * -net2280_alloc_request (struct usb_ep *_ep, int gfp_flags) +net2280_alloc_request (struct usb_ep *_ep, unsigned gfp_flags) { struct net2280_ep *ep; struct net2280_request *req; @@ -463,7 +463,7 @@ net2280_alloc_buffer ( struct usb_ep *_ep, unsigned bytes, dma_addr_t *dma, - int gfp_flags + unsigned gfp_flags ) { void *retval; @@ -897,7 +897,7 @@ done (struct net2280_ep *ep, struct net2280_request *req, int status) /*-------------------------------------------------------------------------*/ static int -net2280_queue (struct usb_ep *_ep, struct usb_request *_req, int gfp_flags) +net2280_queue (struct usb_ep *_ep, struct usb_request *_req, unsigned gfp_flags) { struct net2280_request *req; struct net2280_ep *ep; @@ -1490,7 +1490,7 @@ show_registers (struct device *_dev, struct device_attribute *attr, char *buf) unsigned long flags; int i; u32 t1, t2; - char *s; + const char *s; dev = dev_get_drvdata (_dev); next = buf; diff --git a/drivers/usb/gadget/omap_udc.c b/drivers/usb/gadget/omap_udc.c index a2b812af6e6..ff5533e6956 100644 --- a/drivers/usb/gadget/omap_udc.c +++ b/drivers/usb/gadget/omap_udc.c @@ -269,7 +269,7 @@ static int omap_ep_disable(struct usb_ep *_ep) /*-------------------------------------------------------------------------*/ static struct usb_request * -omap_alloc_request(struct usb_ep *ep, int gfp_flags) +omap_alloc_request(struct usb_ep *ep, unsigned gfp_flags) { struct omap_req *req; @@ -298,7 +298,7 @@ omap_alloc_buffer( struct usb_ep *_ep, unsigned bytes, dma_addr_t *dma, - int gfp_flags + unsigned gfp_flags ) { void *retval; @@ -937,7 +937,7 @@ static void dma_channel_release(struct omap_ep *ep) /*-------------------------------------------------------------------------*/ static int -omap_ep_queue(struct usb_ep *_ep, struct usb_request *_req, int gfp_flags) +omap_ep_queue(struct usb_ep *_ep, struct usb_request *_req, unsigned gfp_flags) { struct omap_ep *ep = container_of(_ep, struct omap_ep, ep); struct omap_req *req = container_of(_req, struct omap_req, req); @@ -2908,6 +2908,7 @@ static int __exit omap_udc_remove(struct device *dev) * make host resumes and VBUS detection trigger OMAP wakeup events; that * may involve talking to an external transceiver (e.g. isp1301). */ + static int omap_udc_suspend(struct device *dev, pm_message_t message, u32 level) { u32 devstat; @@ -2936,8 +2937,6 @@ static int omap_udc_resume(struct device *dev, u32 level) return 0; DBG("resume + wakeup/SRP\n"); - udc->gadget.dev.parent->power.power_state = PMSG_ON; - udc->gadget.dev.power.power_state = PMSG_ON; omap_pullup(&udc->gadget, 1); /* maybe the host would enumerate us if we nudged it */ diff --git a/drivers/usb/gadget/pxa2xx_udc.c b/drivers/usb/gadget/pxa2xx_udc.c index 6a0b957af33..1507738337c 100644 --- a/drivers/usb/gadget/pxa2xx_udc.c +++ b/drivers/usb/gadget/pxa2xx_udc.c @@ -332,7 +332,7 @@ static int pxa2xx_ep_disable (struct usb_ep *_ep) * pxa2xx_ep_alloc_request - allocate a request data structure */ static struct usb_request * -pxa2xx_ep_alloc_request (struct usb_ep *_ep, int gfp_flags) +pxa2xx_ep_alloc_request (struct usb_ep *_ep, unsigned gfp_flags) { struct pxa2xx_request *req; @@ -367,7 +367,7 @@ pxa2xx_ep_free_request (struct usb_ep *_ep, struct usb_request *_req) */ static void * pxa2xx_ep_alloc_buffer(struct usb_ep *_ep, unsigned bytes, - dma_addr_t *dma, int gfp_flags) + dma_addr_t *dma, unsigned gfp_flags) { char *retval; @@ -874,7 +874,7 @@ done: /*-------------------------------------------------------------------------*/ static int -pxa2xx_ep_queue(struct usb_ep *_ep, struct usb_request *_req, int gfp_flags) +pxa2xx_ep_queue(struct usb_ep *_ep, struct usb_request *_req, unsigned gfp_flags) { struct pxa2xx_request *req; struct pxa2xx_ep *ep; diff --git a/drivers/usb/gadget/zero.c b/drivers/usb/gadget/zero.c index a6e035e2447..bb9b2d94eed 100644 --- a/drivers/usb/gadget/zero.c +++ b/drivers/usb/gadget/zero.c @@ -612,7 +612,7 @@ static void source_sink_complete (struct usb_ep *ep, struct usb_request *req) } static struct usb_request * -source_sink_start_ep (struct usb_ep *ep, int gfp_flags) +source_sink_start_ep (struct usb_ep *ep, unsigned gfp_flags) { struct usb_request *req; int status; @@ -640,7 +640,7 @@ source_sink_start_ep (struct usb_ep *ep, int gfp_flags) } static int -set_source_sink_config (struct zero_dev *dev, int gfp_flags) +set_source_sink_config (struct zero_dev *dev, unsigned gfp_flags) { int result = 0; struct usb_ep *ep; @@ -744,7 +744,7 @@ static void loopback_complete (struct usb_ep *ep, struct usb_request *req) } static int -set_loopback_config (struct zero_dev *dev, int gfp_flags) +set_loopback_config (struct zero_dev *dev, unsigned gfp_flags) { int result = 0; struct usb_ep *ep; @@ -845,7 +845,7 @@ static void zero_reset_config (struct zero_dev *dev) * by limiting configuration choices (like the pxa2xx). */ static int -zero_set_config (struct zero_dev *dev, unsigned number, int gfp_flags) +zero_set_config (struct zero_dev *dev, unsigned number, unsigned gfp_flags) { int result = 0; struct usb_gadget *gadget = dev->gadget; diff --git a/drivers/usb/host/ehci-hcd.c b/drivers/usb/host/ehci-hcd.c index 35248a37b71..149b13fc0a7 100644 --- a/drivers/usb/host/ehci-hcd.c +++ b/drivers/usb/host/ehci-hcd.c @@ -960,7 +960,7 @@ static int ehci_urb_enqueue ( struct usb_hcd *hcd, struct usb_host_endpoint *ep, struct urb *urb, - int mem_flags + unsigned mem_flags ) { struct ehci_hcd *ehci = hcd_to_ehci (hcd); struct list_head qtd_list; diff --git a/drivers/usb/host/ehci-q.c b/drivers/usb/host/ehci-q.c index 45d89a7083b..d74b2d68a50 100644 --- a/drivers/usb/host/ehci-q.c +++ b/drivers/usb/host/ehci-q.c @@ -898,7 +898,7 @@ submit_async ( struct usb_host_endpoint *ep, struct urb *urb, struct list_head *qtd_list, - int mem_flags + unsigned mem_flags ) { struct ehci_qtd *qtd; int epnum; diff --git a/drivers/usb/host/ehci-sched.c b/drivers/usb/host/ehci-sched.c index c2104cad403..9af4f64532a 100644 --- a/drivers/usb/host/ehci-sched.c +++ b/drivers/usb/host/ehci-sched.c @@ -588,7 +588,7 @@ static int intr_submit ( struct usb_host_endpoint *ep, struct urb *urb, struct list_head *qtd_list, - int mem_flags + unsigned mem_flags ) { unsigned epnum; unsigned long flags; @@ -633,7 +633,7 @@ done: /* ehci_iso_stream ops work with both ITD and SITD */ static struct ehci_iso_stream * -iso_stream_alloc (int mem_flags) +iso_stream_alloc (unsigned mem_flags) { struct ehci_iso_stream *stream; @@ -846,7 +846,7 @@ iso_stream_find (struct ehci_hcd *ehci, struct urb *urb) /* ehci_iso_sched ops can be ITD-only or SITD-only */ static struct ehci_iso_sched * -iso_sched_alloc (unsigned packets, int mem_flags) +iso_sched_alloc (unsigned packets, unsigned mem_flags) { struct ehci_iso_sched *iso_sched; int size = sizeof *iso_sched; @@ -919,7 +919,7 @@ itd_urb_transaction ( struct ehci_iso_stream *stream, struct ehci_hcd *ehci, struct urb *urb, - int mem_flags + unsigned mem_flags ) { struct ehci_itd *itd; @@ -1412,7 +1412,8 @@ itd_complete ( /*-------------------------------------------------------------------------*/ -static int itd_submit (struct ehci_hcd *ehci, struct urb *urb, int mem_flags) +static int itd_submit (struct ehci_hcd *ehci, struct urb *urb, + unsigned mem_flags) { int status = -EINVAL; unsigned long flags; @@ -1523,7 +1524,7 @@ sitd_urb_transaction ( struct ehci_iso_stream *stream, struct ehci_hcd *ehci, struct urb *urb, - int mem_flags + unsigned mem_flags ) { struct ehci_sitd *sitd; @@ -1772,7 +1773,8 @@ sitd_complete ( } -static int sitd_submit (struct ehci_hcd *ehci, struct urb *urb, int mem_flags) +static int sitd_submit (struct ehci_hcd *ehci, struct urb *urb, + unsigned mem_flags) { int status = -EINVAL; unsigned long flags; @@ -1822,7 +1824,8 @@ done: #else static inline int -sitd_submit (struct ehci_hcd *ehci, struct urb *urb, int mem_flags) +sitd_submit (struct ehci_hcd *ehci, struct urb *urb, + unsigned mem_flags) { ehci_dbg (ehci, "split iso support is disabled\n"); return -ENOSYS; diff --git a/drivers/usb/host/hc_crisv10.c b/drivers/usb/host/hc_crisv10.c index d9883d774d3..81f8f6b7fdc 100644 --- a/drivers/usb/host/hc_crisv10.c +++ b/drivers/usb/host/hc_crisv10.c @@ -463,7 +463,8 @@ static void etrax_usb_free_epid(int epid); static int etrax_remove_from_sb_list(struct urb *urb); -static void* etrax_usb_buffer_alloc(struct usb_bus* bus, size_t size, int mem_flags, dma_addr_t *dma); +static void* etrax_usb_buffer_alloc(struct usb_bus* bus, size_t size, + unsigned mem_flags, dma_addr_t *dma); static void etrax_usb_buffer_free(struct usb_bus *bus, size_t size, void *addr, dma_addr_t dma); static void etrax_usb_add_to_bulk_sb_list(struct urb *urb, int epid); @@ -476,7 +477,7 @@ static int etrax_usb_submit_ctrl_urb(struct urb *urb); static int etrax_usb_submit_intr_urb(struct urb *urb); static int etrax_usb_submit_isoc_urb(struct urb *urb); -static int etrax_usb_submit_urb(struct urb *urb, int mem_flags); +static int etrax_usb_submit_urb(struct urb *urb, unsigned mem_flags); static int etrax_usb_unlink_urb(struct urb *urb, int status); static int etrax_usb_get_frame_number(struct usb_device *usb_dev); @@ -1262,7 +1263,7 @@ static int etrax_usb_allocate_epid(void) return -1; } -static int etrax_usb_submit_urb(struct urb *urb, int mem_flags) +static int etrax_usb_submit_urb(struct urb *urb, unsigned mem_flags) { etrax_hc_t *hc; int ret = -EINVAL; @@ -4277,7 +4278,8 @@ etrax_usb_bulk_eot_timer_func(unsigned long dummy) } static void* -etrax_usb_buffer_alloc(struct usb_bus* bus, size_t size, int mem_flags, dma_addr_t *dma) +etrax_usb_buffer_alloc(struct usb_bus* bus, size_t size, + unsigned mem_flags, dma_addr_t *dma) { return kmalloc(size, mem_flags); } diff --git a/drivers/usb/host/isp116x-hcd.c b/drivers/usb/host/isp116x-hcd.c index ff0a168e8ee..50b1970fe6b 100644 --- a/drivers/usb/host/isp116x-hcd.c +++ b/drivers/usb/host/isp116x-hcd.c @@ -17,7 +17,7 @@ * The driver basically works. A number of people have used it with a range * of devices. * - *The driver passes all usbtests 1-14. + * The driver passes all usbtests 1-14. * * Suspending/resuming of root hub via sysfs works. Remote wakeup works too. * And suspending/resuming of platform device works too. Suspend/resume @@ -229,7 +229,7 @@ static void preproc_atl_queue(struct isp116x *isp116x) struct isp116x_ep *ep; struct urb *urb; struct ptd *ptd; - u16 toggle, dir, len; + u16 toggle = 0, dir = PTD_DIR_SETUP, len; for (ep = isp116x->atl_active; ep; ep = ep->active) { BUG_ON(list_empty(&ep->hep->urb_list)); @@ -251,8 +251,6 @@ static void preproc_atl_queue(struct isp116x *isp116x) dir = PTD_DIR_OUT; break; case USB_PID_SETUP: - toggle = 0; - dir = PTD_DIR_SETUP; len = sizeof(struct usb_ctrlrequest); ep->data = urb->setup_packet; break; @@ -264,11 +262,9 @@ static void preproc_atl_queue(struct isp116x *isp116x) ? PTD_DIR_OUT : PTD_DIR_IN; break; default: - /* To please gcc */ - toggle = dir = 0; ERR("%s %d: ep->nextpid %d\n", __func__, __LINE__, ep->nextpid); - BUG_ON(1); + BUG(); } ptd->count = PTD_CC_MSK | PTD_ACTIVE_MSK | PTD_TOGGLE(toggle); @@ -697,7 +693,7 @@ static int balance(struct isp116x *isp116x, u16 period, u16 load) static int isp116x_urb_enqueue(struct usb_hcd *hcd, struct usb_host_endpoint *hep, struct urb *urb, - int mem_flags) + unsigned mem_flags) { struct isp116x *isp116x = hcd_to_isp116x(hcd); struct usb_device *udev = urb->dev; @@ -719,7 +715,7 @@ static int isp116x_urb_enqueue(struct usb_hcd *hcd, } /* avoid all allocations within spinlocks: request or endpoint */ if (!hep->hcpriv) { - ep = kcalloc(1, sizeof *ep, (__force unsigned)mem_flags); + ep = kcalloc(1, sizeof *ep, mem_flags); if (!ep) return -ENOMEM; } @@ -1054,7 +1050,7 @@ static int isp116x_hub_control(struct usb_hcd *hcd, break; case GetHubStatus: DBG("GetHubStatus\n"); - *(__le32 *) buf = cpu_to_le32(0); + *(__le32 *) buf = 0; break; case GetPortStatus: DBG("GetPortStatus\n"); @@ -1810,9 +1806,9 @@ static int isp116x_suspend(struct device *dev, pm_message_t state, u32 phase) ret = usb_suspend_device(hcd->self.root_hub, state); if (!ret) { dev->power.power_state = state; - INFO("%s suspended\n", (char *)hcd_name); + INFO("%s suspended\n", hcd_name); } else - ERR("%s suspend failed\n", (char *)hcd_name); + ERR("%s suspend failed\n", hcd_name); return ret; } diff --git a/drivers/usb/host/ohci-hcd.c b/drivers/usb/host/ohci-hcd.c index 13cd2177b55..68decab280d 100644 --- a/drivers/usb/host/ohci-hcd.c +++ b/drivers/usb/host/ohci-hcd.c @@ -180,7 +180,7 @@ static int ohci_urb_enqueue ( struct usb_hcd *hcd, struct usb_host_endpoint *ep, struct urb *urb, - int mem_flags + unsigned mem_flags ) { struct ohci_hcd *ohci = hcd_to_ohci (hcd); struct ed *ed; @@ -673,8 +673,10 @@ retry: ohci_dump (ohci, 1); - if (ohci_to_hcd(ohci)->self.root_hub == NULL) + if (ohci_to_hcd(ohci)->self.root_hub == NULL) { + register_reboot_notifier (&ohci->reboot_notifier); create_debug_files (ohci); + } return 0; } diff --git a/drivers/usb/host/ohci-hub.c b/drivers/usb/host/ohci-hub.c index e2fc4129dfc..83ca4549a50 100644 --- a/drivers/usb/host/ohci-hub.c +++ b/drivers/usb/host/ohci-hub.c @@ -419,10 +419,11 @@ ohci_hub_descriptor ( /* two bitmaps: ports removable, and usb 1.0 legacy PortPwrCtrlMask */ rh = roothub_b (ohci); + memset(desc->bitmap, 0xff, sizeof(desc->bitmap)); desc->bitmap [0] = rh & RH_B_DR; if (ports > 7) { desc->bitmap [1] = (rh & RH_B_DR) >> 8; - desc->bitmap [2] = desc->bitmap [3] = 0xff; + desc->bitmap [2] = 0xff; } else desc->bitmap [1] = 0xff; } diff --git a/drivers/usb/host/ohci-mem.c b/drivers/usb/host/ohci-mem.c index 23735a36af0..fd3c4d3714b 100644 --- a/drivers/usb/host/ohci-mem.c +++ b/drivers/usb/host/ohci-mem.c @@ -84,7 +84,7 @@ dma_to_td (struct ohci_hcd *hc, dma_addr_t td_dma) /* TDs ... */ static struct td * -td_alloc (struct ohci_hcd *hc, int mem_flags) +td_alloc (struct ohci_hcd *hc, unsigned mem_flags) { dma_addr_t dma; struct td *td; @@ -118,7 +118,7 @@ td_free (struct ohci_hcd *hc, struct td *td) /* EDs ... */ static struct ed * -ed_alloc (struct ohci_hcd *hc, int mem_flags) +ed_alloc (struct ohci_hcd *hc, unsigned mem_flags) { dma_addr_t dma; struct ed *ed; diff --git a/drivers/usb/host/ohci-omap.c b/drivers/usb/host/ohci-omap.c index b62d6993769..5cde76faab9 100644 --- a/drivers/usb/host/ohci-omap.c +++ b/drivers/usb/host/ohci-omap.c @@ -456,34 +456,22 @@ static int ohci_hcd_omap_drv_remove(struct device *dev) #ifdef CONFIG_PM -/* states match PCI usage, always suspending the root hub except that - * 4 ~= D3cold (ACPI D3) with clock off (resume sees reset). - * - * FIXME: above comment is not right, and code is wrong, too :-(. - */ - -static int ohci_omap_suspend(struct device *dev, pm_message_t state, u32 level) +static int ohci_omap_suspend(struct device *dev, pm_message_t message, u32 level) { struct ohci_hcd *ohci = hcd_to_ohci(dev_get_drvdata(dev)); int status = -EINVAL; if (level != SUSPEND_POWER_DOWN) return 0; - if (state <= dev->power.power_state) - return 0; - dev_dbg(dev, "suspend to %d\n", state); down(&ohci_to_hcd(ohci)->self.root_hub->serialize); status = ohci_hub_suspend(ohci_to_hcd(ohci)); if (status == 0) { - if (state >= 4) { - omap_ohci_clock_power(0); - ohci_to_hcd(ohci)->self.root_hub->state = - USB_STATE_SUSPENDED; - state = 4; - } + omap_ohci_clock_power(0); + ohci_to_hcd(ohci)->self.root_hub->state = + USB_STATE_SUSPENDED; ohci_to_hcd(ohci)->state = HC_STATE_SUSPENDED; - dev->power.power_state = state; + dev->power.power_state = PMSG_SUSPEND; } up(&ohci_to_hcd(ohci)->self.root_hub->serialize); return status; @@ -497,29 +485,20 @@ static int ohci_omap_resume(struct device *dev, u32 level) if (level != RESUME_POWER_ON) return 0; - switch (dev->power.power_state) { - case 0: - break; - case 4: - if (time_before(jiffies, ohci->next_statechange)) - msleep(5); - ohci->next_statechange = jiffies; - omap_ohci_clock_power(1); - /* FALLTHROUGH */ - default: - dev_dbg(dev, "resume from %d\n", dev->power.power_state); + if (time_before(jiffies, ohci->next_statechange)) + msleep(5); + ohci->next_statechange = jiffies; + omap_ohci_clock_power(1); #ifdef CONFIG_USB_SUSPEND - /* get extra cleanup even if remote wakeup isn't in use */ - status = usb_resume_device(ohci_to_hcd(ohci)->self.root_hub); + /* get extra cleanup even if remote wakeup isn't in use */ + status = usb_resume_device(ohci_to_hcd(ohci)->self.root_hub); #else - down(&ohci_to_hcd(ohci)->self.root_hub->serialize); - status = ohci_hub_resume(ohci_to_hcd(ohci)); - up(&ohci_to_hcd(ohci)->self.root_hub->serialize); + down(&ohci_to_hcd(ohci)->self.root_hub->serialize); + status = ohci_hub_resume(ohci_to_hcd(ohci)); + up(&ohci_to_hcd(ohci)->self.root_hub->serialize); #endif - if (status == 0) - dev->power.power_state = 0; - break; - } + if (status == 0) + dev->power.power_state = PMSG_ON; return status; } diff --git a/drivers/usb/host/sl811-hcd.c b/drivers/usb/host/sl811-hcd.c index 6c3f910bc30..7a890a65f55 100644 --- a/drivers/usb/host/sl811-hcd.c +++ b/drivers/usb/host/sl811-hcd.c @@ -815,7 +815,7 @@ static int sl811h_urb_enqueue( struct usb_hcd *hcd, struct usb_host_endpoint *hep, struct urb *urb, - int mem_flags + unsigned mem_flags ) { struct sl811 *sl811 = hcd_to_sl811(hcd); struct usb_device *udev = urb->dev; diff --git a/drivers/usb/host/sl811_cs.c b/drivers/usb/host/sl811_cs.c index 269d8ef0145..38aebe361ca 100644 --- a/drivers/usb/host/sl811_cs.c +++ b/drivers/usb/host/sl811_cs.c @@ -20,7 +20,6 @@ #include <linux/timer.h> #include <linux/ioport.h> -#include <pcmcia/version.h> #include <pcmcia/cs_types.h> #include <pcmcia/cs.h> #include <pcmcia/cistpl.h> @@ -389,11 +388,6 @@ static dev_link_t *sl811_cs_attach(void) dev_list = link; client_reg.dev_info = (dev_info_t *) &driver_name; client_reg.Attributes = INFO_IO_CLIENT | INFO_CARD_SHARE; - client_reg.EventMask = - CS_EVENT_CARD_INSERTION | CS_EVENT_CARD_REMOVAL | - CS_EVENT_RESET_PHYSICAL | CS_EVENT_CARD_RESET | - CS_EVENT_PM_SUSPEND | CS_EVENT_PM_RESUME; - client_reg.event_handler = &sl811_cs_event; client_reg.Version = 0x0210; client_reg.event_callback_args.client_data = link; ret = pcmcia_register_client(&link->handle, &client_reg); @@ -418,6 +412,7 @@ static struct pcmcia_driver sl811_cs_driver = { .name = (char *)driver_name, }, .attach = sl811_cs_attach, + .event = sl811_cs_event, .detach = sl811_cs_detach, .id_table = sl811_ids, }; diff --git a/drivers/usb/host/uhci-q.c b/drivers/usb/host/uhci-q.c index 5f18084a116..bbb36cd6ed6 100644 --- a/drivers/usb/host/uhci-q.c +++ b/drivers/usb/host/uhci-q.c @@ -1164,7 +1164,7 @@ static struct urb *uhci_find_urb_ep(struct uhci_hcd *uhci, struct urb *urb) static int uhci_urb_enqueue(struct usb_hcd *hcd, struct usb_host_endpoint *ep, - struct urb *urb, int mem_flags) + struct urb *urb, unsigned mem_flags) { int ret; struct uhci_hcd *uhci = hcd_to_uhci(hcd); diff --git a/drivers/usb/input/Kconfig b/drivers/usb/input/Kconfig index fd59f6bdd67..298e4a25e3d 100644 --- a/drivers/usb/input/Kconfig +++ b/drivers/usb/input/Kconfig @@ -259,3 +259,16 @@ config USB_ATI_REMOTE To compile this driver as a module, choose M here: the module will be called ati_remote. +config USB_KEYSPAN_REMOTE + tristate "Keyspan DMR USB remote control (EXPERIMENTAL)" + depends on USB && INPUT && EXPERIMENTAL + ---help--- + Say Y here if you want to use a Keyspan DMR USB remote control. + Currently only the UIA-11 type of receiver has been tested. The tag + on the receiver that connects to the USB port should have a P/N that + will tell you what type of DMR you have. The UIA-10 type is not + supported at this time. This driver maps all buttons to keypress + events. + + To compile this driver as a module, choose M here: the module will + be called keyspan_remote. diff --git a/drivers/usb/input/Makefile b/drivers/usb/input/Makefile index 831b2b0f1f0..f1547be632d 100644 --- a/drivers/usb/input/Makefile +++ b/drivers/usb/input/Makefile @@ -31,6 +31,7 @@ obj-$(CONFIG_USB_ATI_REMOTE) += ati_remote.o obj-$(CONFIG_USB_HID) += usbhid.o obj-$(CONFIG_USB_KBD) += usbkbd.o obj-$(CONFIG_USB_KBTAB) += kbtab.o +obj-$(CONFIG_USB_KEYSPAN_REMOTE) += keyspan_remote.o obj-$(CONFIG_USB_MOUSE) += usbmouse.o obj-$(CONFIG_USB_MTOUCH) += mtouchusb.o obj-$(CONFIG_USB_ITMTOUCH) += itmtouch.o diff --git a/drivers/usb/input/hid-core.c b/drivers/usb/input/hid-core.c index 100b49bd1d3..2350e7a5ad7 100644 --- a/drivers/usb/input/hid-core.c +++ b/drivers/usb/input/hid-core.c @@ -1428,6 +1428,19 @@ void hid_init_reports(struct hid_device *hid) #define USB_DEVICE_ID_VERNIER_SKIP 0x0003 #define USB_DEVICE_ID_VERNIER_CYCLOPS 0x0004 +#define USB_VENDOR_ID_LD 0x0f11 +#define USB_DEVICE_ID_CASSY 0x1000 +#define USB_DEVICE_ID_POCKETCASSY 0x1010 +#define USB_DEVICE_ID_MOBILECASSY 0x1020 +#define USB_DEVICE_ID_JWM 0x1080 +#define USB_DEVICE_ID_DMMP 0x1081 +#define USB_DEVICE_ID_UMIP 0x1090 +#define USB_DEVICE_ID_VIDEOCOM 0x1200 +#define USB_DEVICE_ID_COM3LAB 0x2000 +#define USB_DEVICE_ID_TELEPORT 0x2010 +#define USB_DEVICE_ID_NETWORKANALYSER 0x2020 +#define USB_DEVICE_ID_POWERCONTROL 0x2030 + /* * Alphabetically sorted blacklist by quirk type. @@ -1463,6 +1476,17 @@ static struct hid_blacklist { { USB_VENDOR_ID_GRIFFIN, USB_DEVICE_ID_POWERMATE, HID_QUIRK_IGNORE }, { USB_VENDOR_ID_GRIFFIN, USB_DEVICE_ID_SOUNDKNOB, HID_QUIRK_IGNORE }, { USB_VENDOR_ID_KBGEAR, USB_DEVICE_ID_KBGEAR_JAMSTUDIO, HID_QUIRK_IGNORE }, + { USB_VENDOR_ID_LD, USB_DEVICE_ID_CASSY, HID_QUIRK_IGNORE }, + { USB_VENDOR_ID_LD, USB_DEVICE_ID_POCKETCASSY, HID_QUIRK_IGNORE }, + { USB_VENDOR_ID_LD, USB_DEVICE_ID_MOBILECASSY, HID_QUIRK_IGNORE }, + { USB_VENDOR_ID_LD, USB_DEVICE_ID_JWM, HID_QUIRK_IGNORE }, + { USB_VENDOR_ID_LD, USB_DEVICE_ID_DMMP, HID_QUIRK_IGNORE }, + { USB_VENDOR_ID_LD, USB_DEVICE_ID_UMIP, HID_QUIRK_IGNORE }, + { USB_VENDOR_ID_LD, USB_DEVICE_ID_VIDEOCOM, HID_QUIRK_IGNORE }, + { USB_VENDOR_ID_LD, USB_DEVICE_ID_COM3LAB, HID_QUIRK_IGNORE }, + { USB_VENDOR_ID_LD, USB_DEVICE_ID_TELEPORT, HID_QUIRK_IGNORE }, + { USB_VENDOR_ID_LD, USB_DEVICE_ID_NETWORKANALYSER, HID_QUIRK_IGNORE }, + { USB_VENDOR_ID_LD, USB_DEVICE_ID_POWERCONTROL, HID_QUIRK_IGNORE }, { USB_VENDOR_ID_MCC, USB_DEVICE_ID_MCC_PMD1024LS, HID_QUIRK_IGNORE }, { USB_VENDOR_ID_MCC, USB_DEVICE_ID_MCC_PMD1208LS, HID_QUIRK_IGNORE }, { USB_VENDOR_ID_MGE, USB_DEVICE_ID_MGE_UPS, HID_QUIRK_IGNORE }, diff --git a/drivers/usb/input/keyspan_remote.c b/drivers/usb/input/keyspan_remote.c new file mode 100644 index 00000000000..67dc9368520 --- /dev/null +++ b/drivers/usb/input/keyspan_remote.c @@ -0,0 +1,633 @@ +/* + * keyspan_remote: USB driver for the Keyspan DMR + * + * Copyright (C) 2005 Zymeta Corporation - Michael Downey (downey@zymeta.com) + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation, version 2. + * + * This driver has been put together with the support of Innosys, Inc. + * and Keyspan, Inc the manufacturers of the Keyspan USB DMR product. + */ + +#include <linux/config.h> +#include <linux/kernel.h> +#include <linux/errno.h> +#include <linux/init.h> +#include <linux/slab.h> +#include <linux/module.h> +#include <linux/moduleparam.h> +#include <linux/input.h> +#include <linux/usb.h> + +#define DRIVER_VERSION "v0.1" +#define DRIVER_AUTHOR "Michael Downey <downey@zymeta.com>" +#define DRIVER_DESC "Driver for the USB Keyspan remote control." +#define DRIVER_LICENSE "GPL" + +/* Parameters that can be passed to the driver. */ +static int debug; +module_param(debug, int, 0444); +MODULE_PARM_DESC(debug, "Enable extra debug messages and information"); + +/* Vendor and product ids */ +#define USB_KEYSPAN_VENDOR_ID 0x06CD +#define USB_KEYSPAN_PRODUCT_UIA11 0x0202 + +/* Defines for converting the data from the remote. */ +#define ZERO 0x18 +#define ZERO_MASK 0x1F /* 5 bits for a 0 */ +#define ONE 0x3C +#define ONE_MASK 0x3F /* 6 bits for a 1 */ +#define SYNC 0x3F80 +#define SYNC_MASK 0x3FFF /* 14 bits for a SYNC sequence */ +#define STOP 0x00 +#define STOP_MASK 0x1F /* 5 bits for the STOP sequence */ +#define GAP 0xFF + +#define RECV_SIZE 8 /* The UIA-11 type have a 8 byte limit. */ + +/* table of devices that work with this driver */ +static struct usb_device_id keyspan_table[] = { + { USB_DEVICE(USB_KEYSPAN_VENDOR_ID, USB_KEYSPAN_PRODUCT_UIA11) }, + { } /* Terminating entry */ +}; + +/* Structure to store all the real stuff that a remote sends to us. */ +struct keyspan_message { + u16 system; + u8 button; + u8 toggle; +}; + +/* Structure used for all the bit testing magic needed to be done. */ +struct bit_tester { + u32 tester; + int len; + int pos; + int bits_left; + u8 buffer[32]; +}; + +/* Structure to hold all of our driver specific stuff */ +struct usb_keyspan { + char name[128]; + char phys[64]; + struct usb_device* udev; + struct input_dev input; + struct usb_interface* interface; + struct usb_endpoint_descriptor* in_endpoint; + struct urb* irq_urb; + int open; + dma_addr_t in_dma; + unsigned char* in_buffer; + + /* variables used to parse messages from remote. */ + struct bit_tester data; + int stage; + int toggle; +}; + +/* + * Table that maps the 31 possible keycodes to input keys. + * Currently there are 15 and 17 button models so RESERVED codes + * are blank areas in the mapping. + */ +static int keyspan_key_table[] = { + KEY_RESERVED, /* 0 is just a place holder. */ + KEY_RESERVED, + KEY_STOP, + KEY_PLAYCD, + KEY_RESERVED, + KEY_PREVIOUSSONG, + KEY_REWIND, + KEY_FORWARD, + KEY_NEXTSONG, + KEY_RESERVED, + KEY_RESERVED, + KEY_RESERVED, + KEY_PAUSE, + KEY_VOLUMEUP, + KEY_RESERVED, + KEY_RESERVED, + KEY_RESERVED, + KEY_VOLUMEDOWN, + KEY_RESERVED, + KEY_UP, + KEY_RESERVED, + KEY_MUTE, + KEY_LEFT, + KEY_ENTER, + KEY_RIGHT, + KEY_RESERVED, + KEY_RESERVED, + KEY_DOWN, + KEY_RESERVED, + KEY_KPASTERISK, + KEY_RESERVED, + KEY_MENU +}; + +static struct usb_driver keyspan_driver; + +/* + * Debug routine that prints out what we've received from the remote. + */ +static void keyspan_print(struct usb_keyspan* dev) /*unsigned char* data)*/ +{ + char codes[4*RECV_SIZE]; + int i; + + for (i = 0; i < RECV_SIZE; i++) { + snprintf(codes+i*3, 4, "%02x ", dev->in_buffer[i]); + } + + dev_info(&dev->udev->dev, "%s\n", codes); +} + +/* + * Routine that manages the bit_tester structure. It makes sure that there are + * at least bits_needed bits loaded into the tester. + */ +static int keyspan_load_tester(struct usb_keyspan* dev, int bits_needed) +{ + if (dev->data.bits_left >= bits_needed) + return(0); + + /* + * Somehow we've missed the last message. The message will be repeated + * though so it's not too big a deal + */ + if (dev->data.pos >= dev->data.len) { + dev_dbg(&dev->udev, "%s - Error ran out of data. pos: %d, len: %d\n", + __FUNCTION__, dev->data.pos, dev->data.len); + return(-1); + } + + /* Load as much as we can into the tester. */ + while ((dev->data.bits_left + 7 < (sizeof(dev->data.tester) * 8)) && + (dev->data.pos < dev->data.len)) { + dev->data.tester += (dev->data.buffer[dev->data.pos++] << dev->data.bits_left); + dev->data.bits_left += 8; + } + + return(0); +} + +/* + * Routine that handles all the logic needed to parse out the message from the remote. + */ +static void keyspan_check_data(struct usb_keyspan *remote, struct pt_regs *regs) +{ + int i; + int found = 0; + struct keyspan_message message; + + switch(remote->stage) { + case 0: + /* + * In stage 0 we want to find the start of a message. The remote sends a 0xFF as filler. + * So the first byte that isn't a FF should be the start of a new message. + */ + for (i = 0; i < RECV_SIZE && remote->in_buffer[i] == GAP; ++i); + + if (i < RECV_SIZE) { + memcpy(remote->data.buffer, remote->in_buffer, RECV_SIZE); + remote->data.len = RECV_SIZE; + remote->data.pos = 0; + remote->data.tester = 0; + remote->data.bits_left = 0; + remote->stage = 1; + } + break; + + case 1: + /* + * Stage 1 we should have 16 bytes and should be able to detect a + * SYNC. The SYNC is 14 bits, 7 0's and then 7 1's. + */ + memcpy(remote->data.buffer + remote->data.len, remote->in_buffer, RECV_SIZE); + remote->data.len += RECV_SIZE; + + found = 0; + while ((remote->data.bits_left >= 14 || remote->data.pos < remote->data.len) && !found) { + for (i = 0; i < 8; ++i) { + if (keyspan_load_tester(remote, 14) != 0) { + remote->stage = 0; + return; + } + + if ((remote->data.tester & SYNC_MASK) == SYNC) { + remote->data.tester = remote->data.tester >> 14; + remote->data.bits_left -= 14; + found = 1; + break; + } else { + remote->data.tester = remote->data.tester >> 1; + --remote->data.bits_left; + } + } + } + + if (!found) { + remote->stage = 0; + remote->data.len = 0; + } else { + remote->stage = 2; + } + break; + + case 2: + /* + * Stage 2 we should have 24 bytes which will be enough for a full + * message. We need to parse out the system code, button code, + * toggle code, and stop. + */ + memcpy(remote->data.buffer + remote->data.len, remote->in_buffer, RECV_SIZE); + remote->data.len += RECV_SIZE; + + message.system = 0; + for (i = 0; i < 9; i++) { + keyspan_load_tester(remote, 6); + + if ((remote->data.tester & ZERO_MASK) == ZERO) { + message.system = message.system << 1; + remote->data.tester = remote->data.tester >> 5; + remote->data.bits_left -= 5; + } else if ((remote->data.tester & ONE_MASK) == ONE) { + message.system = (message.system << 1) + 1; + remote->data.tester = remote->data.tester >> 6; + remote->data.bits_left -= 6; + } else { + err("%s - Unknown sequence found in system data.\n", __FUNCTION__); + remote->stage = 0; + return; + } + } + + message.button = 0; + for (i = 0; i < 5; i++) { + keyspan_load_tester(remote, 6); + + if ((remote->data.tester & ZERO_MASK) == ZERO) { + message.button = message.button << 1; + remote->data.tester = remote->data.tester >> 5; + remote->data.bits_left -= 5; + } else if ((remote->data.tester & ONE_MASK) == ONE) { + message.button = (message.button << 1) + 1; + remote->data.tester = remote->data.tester >> 6; + remote->data.bits_left -= 6; + } else { + err("%s - Unknown sequence found in button data.\n", __FUNCTION__); + remote->stage = 0; + return; + } + } + + keyspan_load_tester(remote, 6); + if ((remote->data.tester & ZERO_MASK) == ZERO) { + message.toggle = 0; + remote->data.tester = remote->data.tester >> 5; + remote->data.bits_left -= 5; + } else if ((remote->data.tester & ONE_MASK) == ONE) { + message.toggle = 1; + remote->data.tester = remote->data.tester >> 6; + remote->data.bits_left -= 6; + } else { + err("%s - Error in message, invalid toggle.\n", __FUNCTION__); + } + + keyspan_load_tester(remote, 5); + if ((remote->data.tester & STOP_MASK) == STOP) { + remote->data.tester = remote->data.tester >> 5; + remote->data.bits_left -= 5; + } else { + err("Bad message recieved, no stop bit found.\n"); + } + + dev_dbg(&remote->udev, + "%s found valid message: system: %d, button: %d, toggle: %d\n", + __FUNCTION__, message.system, message.button, message.toggle); + + if (message.toggle != remote->toggle) { + input_regs(&remote->input, regs); + input_report_key(&remote->input, keyspan_key_table[message.button], 1); + input_report_key(&remote->input, keyspan_key_table[message.button], 0); + input_sync(&remote->input); + remote->toggle = message.toggle; + } + + remote->stage = 0; + break; + } +} + +/* + * Routine for sending all the initialization messages to the remote. + */ +static int keyspan_setup(struct usb_device* dev) +{ + int retval = 0; + + retval = usb_control_msg(dev, usb_sndctrlpipe(dev, 0), + 0x11, 0x40, 0x5601, 0x0, NULL, 0, 0); + if (retval) { + dev_dbg(&dev->dev, "%s - failed to set bit rate due to error: %d\n", + __FUNCTION__, retval); + return(retval); + } + + retval = usb_control_msg(dev, usb_sndctrlpipe(dev, 0), + 0x44, 0x40, 0x0, 0x0, NULL, 0, 0); + if (retval) { + dev_dbg(&dev->dev, "%s - failed to set resume sensitivity due to error: %d\n", + __FUNCTION__, retval); + return(retval); + } + + retval = usb_control_msg(dev, usb_sndctrlpipe(dev, 0), + 0x22, 0x40, 0x0, 0x0, NULL, 0, 0); + if (retval) { + dev_dbg(&dev->dev, "%s - failed to turn receive on due to error: %d\n", + __FUNCTION__, retval); + return(retval); + } + + dev_dbg(&dev->dev, "%s - Setup complete.\n", __FUNCTION__); + return(retval); +} + +/* + * Routine used to handle a new message that has come in. + */ +static void keyspan_irq_recv(struct urb *urb, struct pt_regs *regs) +{ + struct usb_keyspan *dev = urb->context; + int retval; + + /* Check our status in case we need to bail out early. */ + switch (urb->status) { + case 0: + break; + + /* Device went away so don't keep trying to read from it. */ + case -ECONNRESET: + case -ENOENT: + case -ESHUTDOWN: + return; + + default: + goto resubmit; + break; + } + + if (debug) + keyspan_print(dev); + + keyspan_check_data(dev, regs); + +resubmit: + retval = usb_submit_urb(urb, GFP_ATOMIC); + if (retval) + err ("%s - usb_submit_urb failed with result: %d", __FUNCTION__, retval); +} + +static int keyspan_open(struct input_dev *dev) +{ + struct usb_keyspan *remote = dev->private; + + if (remote->open++) + return 0; + + remote->irq_urb->dev = remote->udev; + if (usb_submit_urb(remote->irq_urb, GFP_KERNEL)) { + remote->open--; + return -EIO; + } + + return 0; +} + +static void keyspan_close(struct input_dev *dev) +{ + struct usb_keyspan *remote = dev->private; + + if (!--remote->open) + usb_kill_urb(remote->irq_urb); +} + +/* + * Routine that sets up the driver to handle a specific USB device detected on the bus. + */ +static int keyspan_probe(struct usb_interface *interface, const struct usb_device_id *id) +{ + int i; + int retval = -ENOMEM; + char path[64]; + char *buf; + struct usb_keyspan *remote = NULL; + struct usb_host_interface *iface_desc; + struct usb_endpoint_descriptor *endpoint; + struct usb_device *udev = usb_get_dev(interface_to_usbdev(interface)); + + /* See if the offered device matches what we can accept */ + if ((udev->descriptor.idVendor != USB_KEYSPAN_VENDOR_ID) || + (udev->descriptor.idProduct != USB_KEYSPAN_PRODUCT_UIA11) ) + return -ENODEV; + + /* allocate memory for our device state and initialize it */ + remote = kmalloc(sizeof(*remote), GFP_KERNEL); + if (remote == NULL) { + err("Out of memory\n"); + goto error; + } + memset(remote, 0x00, sizeof(*remote)); + + remote->udev = udev; + remote->interface = interface; + remote->toggle = -1; /* Set to -1 so we will always not match the toggle from the first remote message. */ + + /* set up the endpoint information */ + /* use only the first in interrupt endpoint */ + iface_desc = interface->cur_altsetting; + for (i = 0; i < iface_desc->desc.bNumEndpoints; ++i) { + endpoint = &iface_desc->endpoint[i].desc; + + if (!remote->in_endpoint && + (endpoint->bEndpointAddress & USB_DIR_IN) && + ((endpoint->bmAttributes & USB_ENDPOINT_XFERTYPE_MASK) == USB_ENDPOINT_XFER_INT)) { + /* we found our interrupt in endpoint */ + remote->in_endpoint = endpoint; + + remote->in_buffer = usb_buffer_alloc(remote->udev, RECV_SIZE, SLAB_ATOMIC, &remote->in_dma); + if (!remote->in_buffer) { + retval = -ENOMEM; + goto error; + } + } + } + + if (!remote->in_endpoint) { + err("Could not find interrupt input endpoint.\n"); + retval = -ENODEV; + goto error; + } + + remote->irq_urb = usb_alloc_urb(0, GFP_KERNEL); + if (!remote->irq_urb) { + err("Failed to allocate urb.\n"); + retval = -ENOMEM; + goto error; + } + + retval = keyspan_setup(remote->udev); + if (retval) { + err("Failed to setup device.\n"); + retval = -ENODEV; + goto error; + } + + /* + * Setup the input system with the bits we are going to be reporting + */ + remote->input.evbit[0] = BIT(EV_KEY); /* We will only report KEY events. */ + for (i = 0; i < 32; ++i) { + if (keyspan_key_table[i] != KEY_RESERVED) { + set_bit(keyspan_key_table[i], remote->input.keybit); + } + } + + remote->input.private = remote; + remote->input.open = keyspan_open; + remote->input.close = keyspan_close; + + usb_make_path(remote->udev, path, 64); + sprintf(remote->phys, "%s/input0", path); + + remote->input.name = remote->name; + remote->input.phys = remote->phys; + remote->input.id.bustype = BUS_USB; + remote->input.id.vendor = le16_to_cpu(remote->udev->descriptor.idVendor); + remote->input.id.product = le16_to_cpu(remote->udev->descriptor.idProduct); + remote->input.id.version = le16_to_cpu(remote->udev->descriptor.bcdDevice); + + if (!(buf = kmalloc(63, GFP_KERNEL))) { + usb_buffer_free(remote->udev, RECV_SIZE, remote->in_buffer, remote->in_dma); + kfree(remote); + return -ENOMEM; + } + + if (remote->udev->descriptor.iManufacturer && + usb_string(remote->udev, remote->udev->descriptor.iManufacturer, buf, 63) > 0) + strcat(remote->name, buf); + + if (remote->udev->descriptor.iProduct && + usb_string(remote->udev, remote->udev->descriptor.iProduct, buf, 63) > 0) + sprintf(remote->name, "%s %s", remote->name, buf); + + if (!strlen(remote->name)) + sprintf(remote->name, "USB Keyspan Remote %04x:%04x", + remote->input.id.vendor, remote->input.id.product); + + kfree(buf); + + /* + * Initialize the URB to access the device. The urb gets sent to the device in keyspan_open() + */ + usb_fill_int_urb(remote->irq_urb, + remote->udev, usb_rcvintpipe(remote->udev, remote->in_endpoint->bEndpointAddress), + remote->in_buffer, RECV_SIZE, keyspan_irq_recv, remote, + remote->in_endpoint->bInterval); + remote->irq_urb->transfer_dma = remote->in_dma; + remote->irq_urb->transfer_flags |= URB_NO_TRANSFER_DMA_MAP; + + /* we can register the device now, as it is ready */ + input_register_device(&remote->input); + + /* save our data pointer in this interface device */ + usb_set_intfdata(interface, remote); + + /* let the user know what node this device is now attached to */ + info("connected: %s on %s", remote->name, path); + return 0; + +error: + /* + * In case of error we need to clean up any allocated buffers + */ + if (remote->irq_urb) + usb_free_urb(remote->irq_urb); + + if (remote->in_buffer) + usb_buffer_free(remote->udev, RECV_SIZE, remote->in_buffer, remote->in_dma); + + if (remote) + kfree(remote); + + return retval; +} + +/* + * Routine called when a device is disconnected from the USB. + */ +static void keyspan_disconnect(struct usb_interface *interface) +{ + struct usb_keyspan *remote; + + /* prevent keyspan_open() from racing keyspan_disconnect() */ + lock_kernel(); + + remote = usb_get_intfdata(interface); + usb_set_intfdata(interface, NULL); + + if (remote) { /* We have a valid driver structure so clean up everything we allocated. */ + input_unregister_device(&remote->input); + usb_kill_urb(remote->irq_urb); + usb_free_urb(remote->irq_urb); + usb_buffer_free(interface_to_usbdev(interface), RECV_SIZE, remote->in_buffer, remote->in_dma); + kfree(remote); + } + + unlock_kernel(); + + info("USB Keyspan now disconnected"); +} + +/* + * Standard driver set up sections + */ +static struct usb_driver keyspan_driver = +{ + .owner = THIS_MODULE, + .name = "keyspan_remote", + .probe = keyspan_probe, + .disconnect = keyspan_disconnect, + .id_table = keyspan_table +}; + +static int __init usb_keyspan_init(void) +{ + int result; + + /* register this driver with the USB subsystem */ + result = usb_register(&keyspan_driver); + if (result) + err("usb_register failed. Error number %d\n", result); + + return result; +} + +static void __exit usb_keyspan_exit(void) +{ + /* deregister this driver with the USB subsystem */ + usb_deregister(&keyspan_driver); +} + +module_init(usb_keyspan_init); +module_exit(usb_keyspan_exit); + +MODULE_DEVICE_TABLE(usb, keyspan_table); +MODULE_AUTHOR(DRIVER_AUTHOR); +MODULE_DESCRIPTION(DRIVER_DESC); +MODULE_LICENSE(DRIVER_LICENSE); diff --git a/drivers/usb/media/Makefile b/drivers/usb/media/Makefile index 2b76df7005f..d83adffa925 100644 --- a/drivers/usb/media/Makefile +++ b/drivers/usb/media/Makefile @@ -2,7 +2,7 @@ # Makefile for USB Media drivers # -sn9c102-objs := sn9c102_core.o sn9c102_hv7131d.o sn9c102_mi0343.o sn9c102_pas106b.o sn9c102_pas202bcb.o sn9c102_tas5110c1b.o sn9c102_tas5130d1b.o +sn9c102-objs := sn9c102_core.o sn9c102_hv7131d.o sn9c102_mi0343.o sn9c102_ov7630.o sn9c102_pas106b.o sn9c102_pas202bcb.o sn9c102_tas5110c1b.o sn9c102_tas5130d1b.o obj-$(CONFIG_USB_DABUSB) += dabusb.o obj-$(CONFIG_USB_DSBR) += dsbr100.o diff --git a/drivers/usb/media/sn9c102.h b/drivers/usb/media/sn9c102.h index 8b8a4c8743f..e5cea0e2eb5 100644 --- a/drivers/usb/media/sn9c102.h +++ b/drivers/usb/media/sn9c102.h @@ -56,7 +56,7 @@ #define SN9C102_MODULE_AUTHOR "(C) 2004-2005 Luca Risolia" #define SN9C102_AUTHOR_EMAIL "<luca.risolia@studio.unibo.it>" #define SN9C102_MODULE_LICENSE "GPL" -#define SN9C102_MODULE_VERSION "1:1.24" +#define SN9C102_MODULE_VERSION "1:1.24a" #define SN9C102_MODULE_VERSION_CODE KERNEL_VERSION(1, 0, 24) enum sn9c102_bridge { diff --git a/drivers/usb/media/sn9c102_core.c b/drivers/usb/media/sn9c102_core.c index 31d57400d5b..cf8cfbabefd 100644 --- a/drivers/usb/media/sn9c102_core.c +++ b/drivers/usb/media/sn9c102_core.c @@ -429,7 +429,7 @@ sn9c102_i2c_try_read(struct sn9c102_device* cam, } -static int +int sn9c102_i2c_try_write(struct sn9c102_device* cam, struct sn9c102_sensor* sensor, u8 address, u8 value) { diff --git a/drivers/usb/media/sn9c102_ov7630.c b/drivers/usb/media/sn9c102_ov7630.c new file mode 100644 index 00000000000..d27c5aedeaf --- /dev/null +++ b/drivers/usb/media/sn9c102_ov7630.c @@ -0,0 +1,394 @@ +/*************************************************************************** + * Plug-in for OV7630 image sensor connected to the SN9C10x PC Camera * + * Controllers * + * * + * Copyright (C) 2005 by Luca Risolia <luca.risolia@studio.unibo.it> * + * * + * This program is free software; you can redistribute it and/or modify * + * it under the terms of the GNU General Public License as published by * + * the Free Software Foundation; either version 2 of the License, or * + * (at your option) any later version. * + * * + * This program is distributed in the hope that it will be useful, * + * but WITHOUT ANY WARRANTY; without even the implied warranty of * + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the * + * GNU General Public License for more details. * + * * + * You should have received a copy of the GNU General Public License * + * along with this program; if not, write to the Free Software * + * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. * + ***************************************************************************/ + +#include "sn9c102_sensor.h" + + +static struct sn9c102_sensor ov7630; + + +static int ov7630_init(struct sn9c102_device* cam) +{ + int err = 0; + + err += sn9c102_write_reg(cam, 0x00, 0x14); + err += sn9c102_write_reg(cam, 0x60, 0x17); + err += sn9c102_write_reg(cam, 0x0f, 0x18); + err += sn9c102_write_reg(cam, 0x50, 0x19); + + err += sn9c102_i2c_write(cam, 0x12, 0x8d); + err += sn9c102_i2c_write(cam, 0x11, 0x00); + err += sn9c102_i2c_write(cam, 0x15, 0x34); + err += sn9c102_i2c_write(cam, 0x16, 0x03); + err += sn9c102_i2c_write(cam, 0x17, 0x1c); + err += sn9c102_i2c_write(cam, 0x18, 0xbd); + err += sn9c102_i2c_write(cam, 0x19, 0x06); + err += sn9c102_i2c_write(cam, 0x1a, 0xf6); + err += sn9c102_i2c_write(cam, 0x1b, 0x04); + err += sn9c102_i2c_write(cam, 0x20, 0x44); + err += sn9c102_i2c_write(cam, 0x23, 0xee); + err += sn9c102_i2c_write(cam, 0x26, 0xa0); + err += sn9c102_i2c_write(cam, 0x27, 0x9a); + err += sn9c102_i2c_write(cam, 0x28, 0x20); + err += sn9c102_i2c_write(cam, 0x29, 0x30); + err += sn9c102_i2c_write(cam, 0x2f, 0x3d); + err += sn9c102_i2c_write(cam, 0x30, 0x24); + err += sn9c102_i2c_write(cam, 0x32, 0x86); + err += sn9c102_i2c_write(cam, 0x60, 0xa9); + err += sn9c102_i2c_write(cam, 0x61, 0x42); + err += sn9c102_i2c_write(cam, 0x65, 0x00); + err += sn9c102_i2c_write(cam, 0x69, 0x38); + err += sn9c102_i2c_write(cam, 0x6f, 0x88); + err += sn9c102_i2c_write(cam, 0x70, 0x0b); + err += sn9c102_i2c_write(cam, 0x71, 0x00); + err += sn9c102_i2c_write(cam, 0x74, 0x21); + err += sn9c102_i2c_write(cam, 0x7d, 0xf7); + + return err; +} + + +static int ov7630_set_ctrl(struct sn9c102_device* cam, + const struct v4l2_control* ctrl) +{ + int err = 0; + + switch (ctrl->id) { + case V4L2_CID_EXPOSURE: + err += sn9c102_i2c_write(cam, 0x10, ctrl->value >> 2); + err += sn9c102_i2c_write(cam, 0x76, ctrl->value & 0x03); + break; + case V4L2_CID_RED_BALANCE: + err += sn9c102_i2c_write(cam, 0x02, ctrl->value); + break; + case V4L2_CID_BLUE_BALANCE: + err += sn9c102_i2c_write(cam, 0x03, ctrl->value); + break; + case V4L2_CID_GAIN: + err += sn9c102_i2c_write(cam, 0x00, ctrl->value); + break; + case V4L2_CID_CONTRAST: + err += ctrl->value ? sn9c102_i2c_write(cam, 0x05, + (ctrl->value-1) | 0x20) + : sn9c102_i2c_write(cam, 0x05, 0x00); + break; + case V4L2_CID_BRIGHTNESS: + err += sn9c102_i2c_write(cam, 0x06, ctrl->value); + break; + case V4L2_CID_SATURATION: + err += sn9c102_i2c_write(cam, 0x03, ctrl->value << 4); + break; + case V4L2_CID_HUE: + err += ctrl->value ? sn9c102_i2c_write(cam, 0x04, + (ctrl->value-1) | 0x20) + : sn9c102_i2c_write(cam, 0x04, 0x00); + break; + case V4L2_CID_DO_WHITE_BALANCE: + err += sn9c102_i2c_write(cam, 0x0c, ctrl->value); + break; + case V4L2_CID_WHITENESS: + err += sn9c102_i2c_write(cam, 0x0d, ctrl->value); + break; + case V4L2_CID_AUTO_WHITE_BALANCE: + err += sn9c102_i2c_write(cam, 0x12, (ctrl->value << 2) | 0x09); + break; + case V4L2_CID_AUTOGAIN: + err += sn9c102_i2c_write(cam, 0x13, ctrl->value); + break; + case V4L2_CID_VFLIP: + err += sn9c102_i2c_write(cam, 0x75, 0x0e | (ctrl->value << 7)); + break; + case V4L2_CID_BLACK_LEVEL: + err += sn9c102_i2c_write(cam, 0x25, ctrl->value); + break; + case SN9C102_V4L2_CID_BRIGHT_LEVEL: + err += sn9c102_i2c_write(cam, 0x24, ctrl->value); + break; + case SN9C102_V4L2_CID_GAMMA: + err += sn9c102_i2c_write(cam, 0x14, (ctrl->value << 2) | 0x80); + break; + case SN9C102_V4L2_CID_BAND_FILTER: + err += sn9c102_i2c_write(cam, 0x2d, ctrl->value << 2); + break; + default: + return -EINVAL; + } + + return err ? -EIO : 0; +} + + +static int ov7630_set_crop(struct sn9c102_device* cam, + const struct v4l2_rect* rect) +{ + struct sn9c102_sensor* s = &ov7630; + int err = 0; + u8 v_start = (u8)(rect->top - s->cropcap.bounds.top) + 1; + + err += sn9c102_write_reg(cam, v_start, 0x13); + + return err; +} + + +static int ov7630_set_pix_format(struct sn9c102_device* cam, + const struct v4l2_pix_format* pix) +{ + int err = 0; + + if (pix->pixelformat == V4L2_PIX_FMT_SN9C10X) + err += sn9c102_write_reg(cam, 0x20, 0x19); + else + err += sn9c102_write_reg(cam, 0x50, 0x19); + + return err; +} + + +static struct sn9c102_sensor ov7630 = { + .name = "OV7630", + .maintainer = "Luca Risolia <luca.risolia@studio.unibo.it>", + .sysfs_ops = SN9C102_I2C_WRITE, + .frequency = SN9C102_I2C_100KHZ, + .interface = SN9C102_I2C_2WIRES, + .i2c_slave_id = 0x21, + .init = &ov7630_init, + .qctrl = { + { + .id = V4L2_CID_GAIN, + .type = V4L2_CTRL_TYPE_INTEGER, + .name = "global gain", + .minimum = 0x00, + .maximum = 0x3f, + .step = 0x01, + .default_value = 0x14, + .flags = 0, + }, + { + .id = V4L2_CID_HUE, + .type = V4L2_CTRL_TYPE_INTEGER, + .name = "hue", + .minimum = 0x00, + .maximum = 0x1f+1, + .step = 0x01, + .default_value = 0x00, + .flags = 0, + }, + { + .id = V4L2_CID_SATURATION, + .type = V4L2_CTRL_TYPE_INTEGER, + .name = "saturation", + .minimum = 0x00, + .maximum = 0x0f, + .step = 0x01, + .default_value = 0x08, + .flags = 0, + }, + { + .id = V4L2_CID_CONTRAST, + .type = V4L2_CTRL_TYPE_INTEGER, + .name = "contrast", + .minimum = 0x00, + .maximum = 0x1f+1, + .step = 0x01, + .default_value = 0x00, + .flags = 0, + }, + { + .id = V4L2_CID_EXPOSURE, + .type = V4L2_CTRL_TYPE_INTEGER, + .name = "exposure", + .minimum = 0x000, + .maximum = 0x3ff, + .step = 0x001, + .default_value = 0x83<<2, + .flags = 0, + }, + { + .id = V4L2_CID_RED_BALANCE, + .type = V4L2_CTRL_TYPE_INTEGER, + .name = "red balance", + .minimum = 0x00, + .maximum = 0xff, + .step = 0x01, + .default_value = 0x3a, + .flags = 0, + }, + { + .id = V4L2_CID_BLUE_BALANCE, + .type = V4L2_CTRL_TYPE_INTEGER, + .name = "blue balance", + .minimum = 0x00, + .maximum = 0xff, + .step = 0x01, + .default_value = 0x77, + .flags = 0, + }, + { + .id = V4L2_CID_BRIGHTNESS, + .type = V4L2_CTRL_TYPE_INTEGER, + .name = "brightness", + .minimum = 0x00, + .maximum = 0xff, + .step = 0x01, + .default_value = 0xa0, + .flags = 0, + }, + { + .id = V4L2_CID_DO_WHITE_BALANCE, + .type = V4L2_CTRL_TYPE_INTEGER, + .name = "white balance background: blue", + .minimum = 0x00, + .maximum = 0x3f, + .step = 0x01, + .default_value = 0x20, + .flags = 0, + }, + { + .id = V4L2_CID_WHITENESS, + .type = V4L2_CTRL_TYPE_INTEGER, + .name = "white balance background: red", + .minimum = 0x00, + .maximum = 0x3f, + .step = 0x01, + .default_value = 0x20, + .flags = 0, + }, + { + .id = V4L2_CID_AUTO_WHITE_BALANCE, + .type = V4L2_CTRL_TYPE_BOOLEAN, + .name = "auto white balance", + .minimum = 0x00, + .maximum = 0x01, + .step = 0x01, + .default_value = 0x01, + .flags = 0, + }, + { + .id = V4L2_CID_AUTOGAIN, + .type = V4L2_CTRL_TYPE_INTEGER, + .name = "gain & exposure mode", + .minimum = 0x00, + .maximum = 0x03, + .step = 0x01, + .default_value = 0x00, + .flags = 0, + }, + { + .id = V4L2_CID_VFLIP, + .type = V4L2_CTRL_TYPE_BOOLEAN, + .name = "vertical flip", + .minimum = 0x00, + .maximum = 0x01, + .step = 0x01, + .default_value = 0x01, + .flags = 0, + }, + { + .id = V4L2_CID_BLACK_LEVEL, + .type = V4L2_CTRL_TYPE_INTEGER, + .name = "black pixel ratio", + .minimum = 0x01, + .maximum = 0x9a, + .step = 0x01, + .default_value = 0x8a, + .flags = 0, + }, + { + .id = SN9C102_V4L2_CID_BRIGHT_LEVEL, + .type = V4L2_CTRL_TYPE_INTEGER, + .name = "bright pixel ratio", + .minimum = 0x01, + .maximum = 0x9a, + .step = 0x01, + .default_value = 0x10, + .flags = 0, + }, + { + .id = SN9C102_V4L2_CID_BAND_FILTER, + .type = V4L2_CTRL_TYPE_BOOLEAN, + .name = "band filter", + .minimum = 0x00, + .maximum = 0x01, + .step = 0x01, + .default_value = 0x00, + .flags = 0, + }, + { + .id = SN9C102_V4L2_CID_GAMMA, + .type = V4L2_CTRL_TYPE_BOOLEAN, + .name = "rgb gamma", + .minimum = 0x00, + .maximum = 0x01, + .step = 0x01, + .default_value = 0x00, + .flags = 0, + }, + }, + .set_ctrl = &ov7630_set_ctrl, + .cropcap = { + .bounds = { + .left = 0, + .top = 0, + .width = 640, + .height = 480, + }, + .defrect = { + .left = 0, + .top = 0, + .width = 640, + .height = 480, + }, + }, + .set_crop = &ov7630_set_crop, + .pix_format = { + .width = 640, + .height = 480, + .pixelformat = V4L2_PIX_FMT_SBGGR8, + .priv = 8, + }, + .set_pix_format = &ov7630_set_pix_format +}; + + +int sn9c102_probe_ov7630(struct sn9c102_device* cam) +{ + int err = 0; + + sn9c102_attach_sensor(cam, &ov7630); + + if (le16_to_cpu(ov7630.usbdev->descriptor.idProduct) != 0x608f && + le16_to_cpu(ov7630.usbdev->descriptor.idProduct) != 0x602c) + return -ENODEV; + + err += sn9c102_write_reg(cam, 0x01, 0x01); + err += sn9c102_write_reg(cam, 0x00, 0x01); + err += sn9c102_write_reg(cam, 0x28, 0x17); + + if (err) + return -EIO; + + err += sn9c102_i2c_write(cam, 0x0b, 0); + if (err) + return -ENODEV; + + return 0; +} diff --git a/drivers/usb/media/sn9c102_sensor.h b/drivers/usb/media/sn9c102_sensor.h index 6a7adebcb4b..a45166c3488 100644 --- a/drivers/usb/media/sn9c102_sensor.h +++ b/drivers/usb/media/sn9c102_sensor.h @@ -64,6 +64,7 @@ struct sn9c102_sensor; */ extern int sn9c102_probe_hv7131d(struct sn9c102_device* cam); extern int sn9c102_probe_mi0343(struct sn9c102_device* cam); +extern int sn9c102_probe_ov7630(struct sn9c102_device* cam); extern int sn9c102_probe_pas106b(struct sn9c102_device* cam); extern int sn9c102_probe_pas202bcb(struct sn9c102_device* cam); extern int sn9c102_probe_tas5110c1b(struct sn9c102_device* cam); @@ -80,6 +81,7 @@ static int (*sn9c102_sensor_table[])(struct sn9c102_device*) = { \ &sn9c102_probe_pas106b, /* strong detection based on SENSOR ids */ \ &sn9c102_probe_pas202bcb, /* strong detection based on SENSOR ids */ \ &sn9c102_probe_hv7131d, /* strong detection based on SENSOR ids */ \ + &sn9c102_probe_ov7630, /* detection mostly based on USB pid/vid */ \ &sn9c102_probe_tas5110c1b, /* detection based on USB pid/vid */ \ &sn9c102_probe_tas5130d1b, /* detection based on USB pid/vid */ \ NULL, \ @@ -103,7 +105,8 @@ static const struct usb_device_id sn9c102_id_table[] = { \ { USB_DEVICE(0x0c45, 0x6029), }, /* PAS106B */ \ { USB_DEVICE(0x0c45, 0x602a), }, /* HV7131D */ \ { USB_DEVICE(0x0c45, 0x602b), }, /* MI-0343 */ \ - { USB_DEVICE(0x0c45, 0x602c), }, /* OV7620 */ \ + { USB_DEVICE(0x0c45, 0x602c), }, /* OV7630 */ \ + { USB_DEVICE(0x0c45, 0x602d), }, \ { USB_DEVICE(0x0c45, 0x6030), }, /* MI03x */ \ { USB_DEVICE(0x0c45, 0x6080), }, \ { USB_DEVICE(0x0c45, 0x6082), }, /* MI0343 and MI0360 */ \ @@ -145,6 +148,8 @@ static const struct usb_device_id sn9c102_id_table[] = { \ */ /* The "try" I2C I/O versions are used when probing the sensor */ +extern int sn9c102_i2c_try_write(struct sn9c102_device*,struct sn9c102_sensor*, + u8 address, u8 value); extern int sn9c102_i2c_try_read(struct sn9c102_device*,struct sn9c102_sensor*, u8 address); @@ -201,6 +206,8 @@ enum sn9c102_i2c_interface { SN9C102_I2C_3WIRES, }; +#define SN9C102_MAX_CTRLS V4L2_CID_LASTP1-V4L2_CID_BASE+10 + struct sn9c102_sensor { char name[32], /* sensor name */ maintainer[64]; /* name of the mantainer <email> */ @@ -243,7 +250,7 @@ struct sn9c102_sensor { sensor according to the default configuration structures below. */ - struct v4l2_queryctrl qctrl[V4L2_CID_LASTP1-V4L2_CID_BASE]; + struct v4l2_queryctrl qctrl[SN9C102_MAX_CTRLS]; /* Optional list of default controls, defined as indicated in the V4L2 API. Menu type controls are not handled by this interface. @@ -356,7 +363,7 @@ struct sn9c102_sensor { core module to store successfully updated values of the above settings, for rollbacks..etc..in case of errors during atomic I/O */ - struct v4l2_queryctrl _qctrl[V4L2_CID_LASTP1-V4L2_CID_BASE]; + struct v4l2_queryctrl _qctrl[SN9C102_MAX_CTRLS]; struct v4l2_rect _rect; }; @@ -367,5 +374,8 @@ struct sn9c102_sensor { #define SN9C102_V4L2_CID_GREEN_BALANCE V4L2_CID_PRIVATE_BASE + 1 #define SN9C102_V4L2_CID_RESET_LEVEL V4L2_CID_PRIVATE_BASE + 2 #define SN9C102_V4L2_CID_PIXEL_BIAS_VOLTAGE V4L2_CID_PRIVATE_BASE + 3 +#define SN9C102_V4L2_CID_GAMMA V4L2_CID_PRIVATE_BASE + 4 +#define SN9C102_V4L2_CID_BAND_FILTER V4L2_CID_PRIVATE_BASE + 5 +#define SN9C102_V4L2_CID_BRIGHT_LEVEL V4L2_CID_PRIVATE_BASE + 6 #endif /* _SN9C102_SENSOR_H_ */ diff --git a/drivers/usb/media/sn9c102_tas5110c1b.c b/drivers/usb/media/sn9c102_tas5110c1b.c index 690d6219227..8775999b5af 100644 --- a/drivers/usb/media/sn9c102_tas5110c1b.c +++ b/drivers/usb/media/sn9c102_tas5110c1b.c @@ -24,8 +24,6 @@ static struct sn9c102_sensor tas5110c1b; -static struct v4l2_control tas5110c1b_gain; - static int tas5110c1b_init(struct sn9c102_device* cam) { @@ -46,21 +44,6 @@ static int tas5110c1b_init(struct sn9c102_device* cam) } -static int tas5110c1b_get_ctrl(struct sn9c102_device* cam, - struct v4l2_control* ctrl) -{ - switch (ctrl->id) { - case V4L2_CID_GAIN: - ctrl->value = tas5110c1b_gain.value; - break; - default: - return -EINVAL; - } - - return 0; -} - - static int tas5110c1b_set_ctrl(struct sn9c102_device* cam, const struct v4l2_control* ctrl) { @@ -68,8 +51,7 @@ static int tas5110c1b_set_ctrl(struct sn9c102_device* cam, switch (ctrl->id) { case V4L2_CID_GAIN: - if (!(err += sn9c102_i2c_write(cam, 0x20, 0xf6 - ctrl->value))) - tas5110c1b_gain.value = ctrl->value; + err += sn9c102_i2c_write(cam, 0x20, 0xf6 - ctrl->value); break; default: return -EINVAL; @@ -147,7 +129,6 @@ static struct sn9c102_sensor tas5110c1b = { .height = 288, }, }, - .get_ctrl = &tas5110c1b_get_ctrl, .set_crop = &tas5110c1b_set_crop, .pix_format = { .width = 352, diff --git a/drivers/usb/media/sn9c102_tas5130d1b.c b/drivers/usb/media/sn9c102_tas5130d1b.c index b378e941bbe..927eafdd8c7 100644 --- a/drivers/usb/media/sn9c102_tas5130d1b.c +++ b/drivers/usb/media/sn9c102_tas5130d1b.c @@ -24,8 +24,6 @@ static struct sn9c102_sensor tas5130d1b; -static struct v4l2_control tas5130d1b_gain, tas5130d1b_exposure; - static int tas5130d1b_init(struct sn9c102_device* cam) { @@ -44,24 +42,6 @@ static int tas5130d1b_init(struct sn9c102_device* cam) } -static int tas5130d1b_get_ctrl(struct sn9c102_device* cam, - struct v4l2_control* ctrl) -{ - switch (ctrl->id) { - case V4L2_CID_GAIN: - ctrl->value = tas5130d1b_gain.value; - break; - case V4L2_CID_EXPOSURE: - ctrl->value = tas5130d1b_exposure.value; - break; - default: - return -EINVAL; - } - - return 0; -} - - static int tas5130d1b_set_ctrl(struct sn9c102_device* cam, const struct v4l2_control* ctrl) { @@ -69,12 +49,10 @@ static int tas5130d1b_set_ctrl(struct sn9c102_device* cam, switch (ctrl->id) { case V4L2_CID_GAIN: - if (!(err += sn9c102_i2c_write(cam, 0x20, 0xf6 - ctrl->value))) - tas5130d1b_gain.value = ctrl->value; + err += sn9c102_i2c_write(cam, 0x20, 0xf6 - ctrl->value); break; case V4L2_CID_EXPOSURE: - if (!(err += sn9c102_i2c_write(cam, 0x40, 0x47 - ctrl->value))) - tas5130d1b_exposure.value = ctrl->value; + err += sn9c102_i2c_write(cam, 0x40, 0x47 - ctrl->value); break; default: return -EINVAL; @@ -147,7 +125,6 @@ static struct sn9c102_sensor tas5130d1b = { .flags = 0, }, }, - .get_ctrl = &tas5130d1b_get_ctrl, .set_ctrl = &tas5130d1b_set_ctrl, .cropcap = { .bounds = { diff --git a/drivers/usb/misc/Kconfig b/drivers/usb/misc/Kconfig index 3a896954b3a..6649531fa82 100644 --- a/drivers/usb/misc/Kconfig +++ b/drivers/usb/misc/Kconfig @@ -139,6 +139,16 @@ config USB_IDMOUSE source "drivers/usb/misc/sisusbvga/Kconfig" +config USB_LD + tristate "USB LD driver" + depends on USB && EXPERIMENTAL + help + This driver is for generic USB devices that use interrupt transfers, + like LD Didactic's USB devices. + + To compile this driver as a module, choose M here: the + module will be called ldusb. + config USB_TEST tristate "USB testing driver (DEVELOPMENT)" depends on USB && USB_DEVICEFS && EXPERIMENTAL diff --git a/drivers/usb/misc/Makefile b/drivers/usb/misc/Makefile index 4a3814cbd48..862e40a8368 100644 --- a/drivers/usb/misc/Makefile +++ b/drivers/usb/misc/Makefile @@ -9,6 +9,7 @@ obj-$(CONFIG_USB_EMI26) += emi26.o obj-$(CONFIG_USB_EMI62) += emi62.o obj-$(CONFIG_USB_IDMOUSE) += idmouse.o obj-$(CONFIG_USB_LCD) += usblcd.o +obj-$(CONFIG_USB_LD) += ldusb.o obj-$(CONFIG_USB_LED) += usbled.o obj-$(CONFIG_USB_LEGOTOWER) += legousbtower.o obj-$(CONFIG_USB_PHIDGETKIT) += phidgetkit.o diff --git a/drivers/usb/misc/ldusb.c b/drivers/usb/misc/ldusb.c new file mode 100644 index 00000000000..66ec88354b9 --- /dev/null +++ b/drivers/usb/misc/ldusb.c @@ -0,0 +1,794 @@ +/** + * Generic USB driver for report based interrupt in/out devices + * like LD Didactic's USB devices. LD Didactic's USB devices are + * HID devices which do not use HID report definitons (they use + * raw interrupt in and our reports only for communication). + * + * This driver uses a ring buffer for time critical reading of + * interrupt in reports and provides read and write methods for + * raw interrupt reports (similar to the Windows HID driver). + * Devices based on the book USB COMPLETE by Jan Axelson may need + * such a compatibility to the Windows HID driver. + * + * Copyright (C) 2005 Michael Hund <mhund@ld-didactic.de> + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * Derived from Lego USB Tower driver + * Copyright (C) 2003 David Glance <advidgsf@sourceforge.net> + * 2001-2004 Juergen Stuber <starblue@users.sourceforge.net> + * + * V0.1 (mh) Initial version + * V0.11 (mh) Added raw support for HID 1.0 devices (no interrupt out endpoint) + */ + +#include <linux/config.h> +#include <linux/kernel.h> +#include <linux/errno.h> +#include <linux/init.h> +#include <linux/slab.h> +#include <linux/module.h> + +#include <asm/uaccess.h> +#include <linux/input.h> +#include <linux/usb.h> +#include <linux/poll.h> + +/* Define these values to match your devices */ +#define USB_VENDOR_ID_LD 0x0f11 /* USB Vendor ID of LD Didactic GmbH */ +#define USB_DEVICE_ID_CASSY 0x1000 /* USB Product ID for all CASSY-S modules */ +#define USB_DEVICE_ID_POCKETCASSY 0x1010 /* USB Product ID for Pocket-CASSY */ +#define USB_DEVICE_ID_MOBILECASSY 0x1020 /* USB Product ID for Mobile-CASSY */ +#define USB_DEVICE_ID_JWM 0x1080 /* USB Product ID for Joule and Wattmeter */ +#define USB_DEVICE_ID_DMMP 0x1081 /* USB Product ID for Digital Multimeter P (reserved) */ +#define USB_DEVICE_ID_UMIP 0x1090 /* USB Product ID for UMI P */ +#define USB_DEVICE_ID_VIDEOCOM 0x1200 /* USB Product ID for VideoCom */ +#define USB_DEVICE_ID_COM3LAB 0x2000 /* USB Product ID for COM3LAB */ +#define USB_DEVICE_ID_TELEPORT 0x2010 /* USB Product ID for Terminal Adapter */ +#define USB_DEVICE_ID_NETWORKANALYSER 0x2020 /* USB Product ID for Network Analyser */ +#define USB_DEVICE_ID_POWERCONTROL 0x2030 /* USB Product ID for Controlling device for Power Electronics */ + +#define USB_VENDOR_ID_VERNIER 0x08f7 +#define USB_DEVICE_ID_VERNIER_LABPRO 0x0001 +#define USB_DEVICE_ID_VERNIER_GOTEMP 0x0002 +#define USB_DEVICE_ID_VERNIER_SKIP 0x0003 +#define USB_DEVICE_ID_VERNIER_CYCLOPS 0x0004 + + +#ifdef CONFIG_USB_DYNAMIC_MINORS +#define USB_LD_MINOR_BASE 0 +#else +#define USB_LD_MINOR_BASE 176 +#endif + +/* table of devices that work with this driver */ +static struct usb_device_id ld_usb_table [] = { + { USB_DEVICE(USB_VENDOR_ID_LD, USB_DEVICE_ID_CASSY) }, + { USB_DEVICE(USB_VENDOR_ID_LD, USB_DEVICE_ID_POCKETCASSY) }, + { USB_DEVICE(USB_VENDOR_ID_LD, USB_DEVICE_ID_MOBILECASSY) }, + { USB_DEVICE(USB_VENDOR_ID_LD, USB_DEVICE_ID_JWM) }, + { USB_DEVICE(USB_VENDOR_ID_LD, USB_DEVICE_ID_DMMP) }, + { USB_DEVICE(USB_VENDOR_ID_LD, USB_DEVICE_ID_UMIP) }, + { USB_DEVICE(USB_VENDOR_ID_LD, USB_DEVICE_ID_VIDEOCOM) }, + { USB_DEVICE(USB_VENDOR_ID_LD, USB_DEVICE_ID_COM3LAB) }, + { USB_DEVICE(USB_VENDOR_ID_LD, USB_DEVICE_ID_TELEPORT) }, + { USB_DEVICE(USB_VENDOR_ID_LD, USB_DEVICE_ID_NETWORKANALYSER) }, + { USB_DEVICE(USB_VENDOR_ID_LD, USB_DEVICE_ID_POWERCONTROL) }, + { USB_DEVICE(USB_VENDOR_ID_VERNIER, USB_DEVICE_ID_VERNIER_LABPRO) }, + { USB_DEVICE(USB_VENDOR_ID_VERNIER, USB_DEVICE_ID_VERNIER_GOTEMP) }, + { USB_DEVICE(USB_VENDOR_ID_VERNIER, USB_DEVICE_ID_VERNIER_SKIP) }, + { USB_DEVICE(USB_VENDOR_ID_VERNIER, USB_DEVICE_ID_VERNIER_CYCLOPS) }, + { } /* Terminating entry */ +}; +MODULE_DEVICE_TABLE(usb, ld_usb_table); +MODULE_VERSION("V0.11"); +MODULE_AUTHOR("Michael Hund <mhund@ld-didactic.de>"); +MODULE_DESCRIPTION("LD USB Driver"); +MODULE_LICENSE("GPL"); +MODULE_SUPPORTED_DEVICE("LD USB Devices"); + +#ifdef CONFIG_USB_DEBUG + static int debug = 1; +#else + static int debug = 0; +#endif + +/* Use our own dbg macro */ +#define dbg_info(dev, format, arg...) do { if (debug) dev_info(dev , format , ## arg); } while (0) + +/* Module parameters */ +module_param(debug, int, S_IRUGO | S_IWUSR); +MODULE_PARM_DESC(debug, "Debug enabled or not"); + +/* All interrupt in transfers are collected in a ring buffer to + * avoid racing conditions and get better performance of the driver. + */ +static int ring_buffer_size = 128; +module_param(ring_buffer_size, int, 0); +MODULE_PARM_DESC(ring_buffer_size, "Read ring buffer size in reports"); + +/* The write_buffer can contain more than one interrupt out transfer. + */ +static int write_buffer_size = 10; +module_param(write_buffer_size, int, 0); +MODULE_PARM_DESC(write_buffer_size, "Write buffer size in reports"); + +/* As of kernel version 2.6.4 ehci-hcd uses an + * "only one interrupt transfer per frame" shortcut + * to simplify the scheduling of periodic transfers. + * This conflicts with our standard 1ms intervals for in and out URBs. + * We use default intervals of 2ms for in and 2ms for out transfers, + * which should be fast enough. + * Increase the interval to allow more devices that do interrupt transfers, + * or set to 1 to use the standard interval from the endpoint descriptors. + */ +static int min_interrupt_in_interval = 2; +module_param(min_interrupt_in_interval, int, 0); +MODULE_PARM_DESC(min_interrupt_in_interval, "Minimum interrupt in interval in ms"); + +static int min_interrupt_out_interval = 2; +module_param(min_interrupt_out_interval, int, 0); +MODULE_PARM_DESC(min_interrupt_out_interval, "Minimum interrupt out interval in ms"); + +/* Structure to hold all of our device specific stuff */ +struct ld_usb { + struct semaphore sem; /* locks this structure */ + struct usb_interface* intf; /* save off the usb interface pointer */ + + int open_count; /* number of times this port has been opened */ + + char* ring_buffer; + unsigned int ring_head; + unsigned int ring_tail; + + wait_queue_head_t read_wait; + wait_queue_head_t write_wait; + + char* interrupt_in_buffer; + struct usb_endpoint_descriptor* interrupt_in_endpoint; + struct urb* interrupt_in_urb; + int interrupt_in_interval; + size_t interrupt_in_endpoint_size; + int interrupt_in_running; + int interrupt_in_done; + + char* interrupt_out_buffer; + struct usb_endpoint_descriptor* interrupt_out_endpoint; + struct urb* interrupt_out_urb; + int interrupt_out_interval; + size_t interrupt_out_endpoint_size; + int interrupt_out_busy; +}; + +/* prevent races between open() and disconnect() */ +static DECLARE_MUTEX(disconnect_sem); + +static struct usb_driver ld_usb_driver; + +/** + * ld_usb_abort_transfers + * aborts transfers and frees associated data structures + */ +static void ld_usb_abort_transfers(struct ld_usb *dev) +{ + /* shutdown transfer */ + if (dev->interrupt_in_running) { + dev->interrupt_in_running = 0; + if (dev->intf) + usb_kill_urb(dev->interrupt_in_urb); + } + if (dev->interrupt_out_busy) + if (dev->intf) + usb_kill_urb(dev->interrupt_out_urb); +} + +/** + * ld_usb_delete + */ +static void ld_usb_delete(struct ld_usb *dev) +{ + ld_usb_abort_transfers(dev); + + /* free data structures */ + usb_free_urb(dev->interrupt_in_urb); + usb_free_urb(dev->interrupt_out_urb); + kfree(dev->ring_buffer); + kfree(dev->interrupt_in_buffer); + kfree(dev->interrupt_out_buffer); + kfree(dev); +} + +/** + * ld_usb_interrupt_in_callback + */ +static void ld_usb_interrupt_in_callback(struct urb *urb, struct pt_regs *regs) +{ + struct ld_usb *dev = urb->context; + size_t *actual_buffer; + unsigned int next_ring_head; + int retval; + + if (urb->status) { + if (urb->status == -ENOENT || + urb->status == -ECONNRESET || + urb->status == -ESHUTDOWN) { + goto exit; + } else { + dbg_info(&dev->intf->dev, "%s: nonzero status received: %d\n", + __FUNCTION__, urb->status); + goto resubmit; /* maybe we can recover */ + } + } + + if (urb->actual_length > 0) { + next_ring_head = (dev->ring_head+1) % ring_buffer_size; + if (next_ring_head != dev->ring_tail) { + actual_buffer = (size_t*)(dev->ring_buffer + dev->ring_head*(sizeof(size_t)+dev->interrupt_in_endpoint_size)); + /* actual_buffer gets urb->actual_length + interrupt_in_buffer */ + *actual_buffer = urb->actual_length; + memcpy(actual_buffer+1, dev->interrupt_in_buffer, urb->actual_length); + dev->ring_head = next_ring_head; + dbg_info(&dev->intf->dev, "%s: received %d bytes\n", + __FUNCTION__, urb->actual_length); + } else + dev_warn(&dev->intf->dev, + "Ring buffer overflow, %d bytes dropped\n", + urb->actual_length); + } + +resubmit: + /* resubmit if we're still running */ + if (dev->interrupt_in_running && dev->intf) { + retval = usb_submit_urb(dev->interrupt_in_urb, GFP_ATOMIC); + if (retval) + dev_err(&dev->intf->dev, + "usb_submit_urb failed (%d)\n", retval); + } + +exit: + dev->interrupt_in_done = 1; + wake_up_interruptible(&dev->read_wait); +} + +/** + * ld_usb_interrupt_out_callback + */ +static void ld_usb_interrupt_out_callback(struct urb *urb, struct pt_regs *regs) +{ + struct ld_usb *dev = urb->context; + + /* sync/async unlink faults aren't errors */ + if (urb->status && !(urb->status == -ENOENT || + urb->status == -ECONNRESET || + urb->status == -ESHUTDOWN)) + dbg_info(&dev->intf->dev, + "%s - nonzero write interrupt status received: %d\n", + __FUNCTION__, urb->status); + + dev->interrupt_out_busy = 0; + wake_up_interruptible(&dev->write_wait); +} + +/** + * ld_usb_open + */ +static int ld_usb_open(struct inode *inode, struct file *file) +{ + struct ld_usb *dev; + int subminor; + int retval = 0; + struct usb_interface *interface; + + nonseekable_open(inode, file); + subminor = iminor(inode); + + down(&disconnect_sem); + + interface = usb_find_interface(&ld_usb_driver, subminor); + + if (!interface) { + err("%s - error, can't find device for minor %d\n", + __FUNCTION__, subminor); + retval = -ENODEV; + goto unlock_disconnect_exit; + } + + dev = usb_get_intfdata(interface); + + if (!dev) { + retval = -ENODEV; + goto unlock_disconnect_exit; + } + + /* lock this device */ + if (down_interruptible(&dev->sem)) { + retval = -ERESTARTSYS; + goto unlock_disconnect_exit; + } + + /* allow opening only once */ + if (dev->open_count) { + retval = -EBUSY; + goto unlock_exit; + } + dev->open_count = 1; + + /* initialize in direction */ + dev->ring_head = 0; + dev->ring_tail = 0; + usb_fill_int_urb(dev->interrupt_in_urb, + interface_to_usbdev(interface), + usb_rcvintpipe(interface_to_usbdev(interface), + dev->interrupt_in_endpoint->bEndpointAddress), + dev->interrupt_in_buffer, + dev->interrupt_in_endpoint_size, + ld_usb_interrupt_in_callback, + dev, + dev->interrupt_in_interval); + + dev->interrupt_in_running = 1; + dev->interrupt_in_done = 0; + + retval = usb_submit_urb(dev->interrupt_in_urb, GFP_KERNEL); + if (retval) { + dev_err(&interface->dev, "Couldn't submit interrupt_in_urb %d\n", retval); + dev->interrupt_in_running = 0; + dev->open_count = 0; + goto unlock_exit; + } + + /* save device in the file's private structure */ + file->private_data = dev; + +unlock_exit: + up(&dev->sem); + +unlock_disconnect_exit: + up(&disconnect_sem); + + return retval; +} + +/** + * ld_usb_release + */ +static int ld_usb_release(struct inode *inode, struct file *file) +{ + struct ld_usb *dev; + int retval = 0; + + dev = file->private_data; + + if (dev == NULL) { + retval = -ENODEV; + goto exit; + } + + if (down_interruptible(&dev->sem)) { + retval = -ERESTARTSYS; + goto exit; + } + + if (dev->open_count != 1) { + retval = -ENODEV; + goto unlock_exit; + } + if (dev->intf == NULL) { + /* the device was unplugged before the file was released */ + up(&dev->sem); + /* unlock here as ld_usb_delete frees dev */ + ld_usb_delete(dev); + goto exit; + } + + /* wait until write transfer is finished */ + if (dev->interrupt_out_busy) + wait_event_interruptible_timeout(dev->write_wait, !dev->interrupt_out_busy, 2 * HZ); + ld_usb_abort_transfers(dev); + dev->open_count = 0; + +unlock_exit: + up(&dev->sem); + +exit: + return retval; +} + +/** + * ld_usb_poll + */ +static unsigned int ld_usb_poll(struct file *file, poll_table *wait) +{ + struct ld_usb *dev; + unsigned int mask = 0; + + dev = file->private_data; + + poll_wait(file, &dev->read_wait, wait); + poll_wait(file, &dev->write_wait, wait); + + if (dev->ring_head != dev->ring_tail) + mask |= POLLIN | POLLRDNORM; + if (!dev->interrupt_out_busy) + mask |= POLLOUT | POLLWRNORM; + + return mask; +} + +/** + * ld_usb_read + */ +static ssize_t ld_usb_read(struct file *file, char __user *buffer, size_t count, + loff_t *ppos) +{ + struct ld_usb *dev; + size_t *actual_buffer; + size_t bytes_to_read; + int retval = 0; + + dev = file->private_data; + + /* verify that we actually have some data to read */ + if (count == 0) + goto exit; + + /* lock this object */ + if (down_interruptible(&dev->sem)) { + retval = -ERESTARTSYS; + goto exit; + } + + /* verify that the device wasn't unplugged */ + if (dev->intf == NULL) { + retval = -ENODEV; + err("No device or device unplugged %d\n", retval); + goto unlock_exit; + } + + /* wait for data */ + if (dev->ring_head == dev->ring_tail) { + if (file->f_flags & O_NONBLOCK) { + retval = -EAGAIN; + goto unlock_exit; + } + retval = wait_event_interruptible(dev->read_wait, dev->interrupt_in_done); + if (retval < 0) + goto unlock_exit; + } + + /* actual_buffer contains actual_length + interrupt_in_buffer */ + actual_buffer = (size_t*)(dev->ring_buffer + dev->ring_tail*(sizeof(size_t)+dev->interrupt_in_endpoint_size)); + bytes_to_read = min(count, *actual_buffer); + if (bytes_to_read < *actual_buffer) + dev_warn(&dev->intf->dev, "Read buffer overflow, %d bytes dropped\n", + *actual_buffer-bytes_to_read); + + /* copy one interrupt_in_buffer from ring_buffer into userspace */ + if (copy_to_user(buffer, actual_buffer+1, bytes_to_read)) { + retval = -EFAULT; + goto unlock_exit; + } + dev->ring_tail = (dev->ring_tail+1) % ring_buffer_size; + + retval = bytes_to_read; + +unlock_exit: + /* unlock the device */ + up(&dev->sem); + +exit: + return retval; +} + +/** + * ld_usb_write + */ +static ssize_t ld_usb_write(struct file *file, const char __user *buffer, + size_t count, loff_t *ppos) +{ + struct ld_usb *dev; + size_t bytes_to_write; + int retval = 0; + + dev = file->private_data; + + /* verify that we actually have some data to write */ + if (count == 0) + goto exit; + + /* lock this object */ + if (down_interruptible(&dev->sem)) { + retval = -ERESTARTSYS; + goto exit; + } + + /* verify that the device wasn't unplugged */ + if (dev->intf == NULL) { + retval = -ENODEV; + err("No device or device unplugged %d\n", retval); + goto unlock_exit; + } + + /* wait until previous transfer is finished */ + if (dev->interrupt_out_busy) { + if (file->f_flags & O_NONBLOCK) { + retval = -EAGAIN; + goto unlock_exit; + } + retval = wait_event_interruptible(dev->write_wait, !dev->interrupt_out_busy); + if (retval < 0) { + goto unlock_exit; + } + } + + /* write the data into interrupt_out_buffer from userspace */ + bytes_to_write = min(count, write_buffer_size*dev->interrupt_out_endpoint_size); + if (bytes_to_write < count) + dev_warn(&dev->intf->dev, "Write buffer overflow, %d bytes dropped\n",count-bytes_to_write); + dbg_info(&dev->intf->dev, "%s: count = %d, bytes_to_write = %d\n", __FUNCTION__, count, bytes_to_write); + + if (copy_from_user(dev->interrupt_out_buffer, buffer, bytes_to_write)) { + retval = -EFAULT; + goto unlock_exit; + } + + if (dev->interrupt_out_endpoint == NULL) { + /* try HID_REQ_SET_REPORT=9 on control_endpoint instead of interrupt_out_endpoint */ + retval = usb_control_msg(interface_to_usbdev(dev->intf), + usb_sndctrlpipe(interface_to_usbdev(dev->intf), 0), + 9, + USB_TYPE_CLASS | USB_RECIP_INTERFACE | USB_DIR_OUT, + 1 << 8, 0, + dev->interrupt_out_buffer, + bytes_to_write, + USB_CTRL_SET_TIMEOUT * HZ); + if (retval < 0) + err("Couldn't submit HID_REQ_SET_REPORT %d\n", retval); + goto unlock_exit; + } + + /* send off the urb */ + usb_fill_int_urb(dev->interrupt_out_urb, + interface_to_usbdev(dev->intf), + usb_sndintpipe(interface_to_usbdev(dev->intf), + dev->interrupt_out_endpoint->bEndpointAddress), + dev->interrupt_out_buffer, + bytes_to_write, + ld_usb_interrupt_out_callback, + dev, + dev->interrupt_out_interval); + + dev->interrupt_out_busy = 1; + wmb(); + + retval = usb_submit_urb(dev->interrupt_out_urb, GFP_KERNEL); + if (retval) { + dev->interrupt_out_busy = 0; + err("Couldn't submit interrupt_out_urb %d\n", retval); + goto unlock_exit; + } + retval = bytes_to_write; + +unlock_exit: + /* unlock the device */ + up(&dev->sem); + +exit: + return retval; +} + +/* file operations needed when we register this driver */ +static struct file_operations ld_usb_fops = { + .owner = THIS_MODULE, + .read = ld_usb_read, + .write = ld_usb_write, + .open = ld_usb_open, + .release = ld_usb_release, + .poll = ld_usb_poll, +}; + +/* + * usb class driver info in order to get a minor number from the usb core, + * and to have the device registered with devfs and the driver core + */ +static struct usb_class_driver ld_usb_class = { + .name = "ldusb%d", + .fops = &ld_usb_fops, + .minor_base = USB_LD_MINOR_BASE, +}; + +/** + * ld_usb_probe + * + * Called by the usb core when a new device is connected that it thinks + * this driver might be interested in. + */ +static int ld_usb_probe(struct usb_interface *intf, const struct usb_device_id *id) +{ + struct usb_device *udev = interface_to_usbdev(intf); + struct ld_usb *dev = NULL; + struct usb_host_interface *iface_desc; + struct usb_endpoint_descriptor *endpoint; + char *buffer; + int i; + int retval = -ENOMEM; + + /* allocate memory for our device state and intialize it */ + + dev = kmalloc(sizeof(*dev), GFP_KERNEL); + if (dev == NULL) { + dev_err(&intf->dev, "Out of memory\n"); + goto exit; + } + memset(dev, 0x00, sizeof(*dev)); + init_MUTEX(&dev->sem); + dev->intf = intf; + init_waitqueue_head(&dev->read_wait); + init_waitqueue_head(&dev->write_wait); + + /* workaround for early firmware versions on fast computers */ + if ((le16_to_cpu(udev->descriptor.idVendor) == USB_VENDOR_ID_LD) && + ((le16_to_cpu(udev->descriptor.idProduct) == USB_DEVICE_ID_CASSY) || + (le16_to_cpu(udev->descriptor.idProduct) == USB_DEVICE_ID_COM3LAB)) && + (le16_to_cpu(udev->descriptor.bcdDevice) <= 0x103)) { + buffer = kmalloc(256, GFP_KERNEL); + /* usb_string makes SETUP+STALL to leave always ControlReadLoop */ + usb_string(udev, 255, buffer, 256); + kfree(buffer); + } + + iface_desc = intf->cur_altsetting; + + /* set up the endpoint information */ + for (i = 0; i < iface_desc->desc.bNumEndpoints; ++i) { + endpoint = &iface_desc->endpoint[i].desc; + + if (((endpoint->bEndpointAddress & USB_ENDPOINT_DIR_MASK) == USB_DIR_IN) && + ((endpoint->bmAttributes & USB_ENDPOINT_XFERTYPE_MASK) == USB_ENDPOINT_XFER_INT)) { + dev->interrupt_in_endpoint = endpoint; + } + + if (((endpoint->bEndpointAddress & USB_ENDPOINT_DIR_MASK) == USB_DIR_OUT) && + ((endpoint->bmAttributes & USB_ENDPOINT_XFERTYPE_MASK) == USB_ENDPOINT_XFER_INT)) { + dev->interrupt_out_endpoint = endpoint; + } + } + if (dev->interrupt_in_endpoint == NULL) { + dev_err(&intf->dev, "Interrupt in endpoint not found\n"); + goto error; + } + if (dev->interrupt_out_endpoint == NULL) + dev_warn(&intf->dev, "Interrupt out endpoint not found (using control endpoint instead)\n"); + + dev->interrupt_in_endpoint_size = le16_to_cpu(dev->interrupt_in_endpoint->wMaxPacketSize); + dev->ring_buffer = kmalloc(ring_buffer_size*(sizeof(size_t)+dev->interrupt_in_endpoint_size), GFP_KERNEL); + if (!dev->ring_buffer) { + dev_err(&intf->dev, "Couldn't allocate ring_buffer\n"); + goto error; + } + dev->interrupt_in_buffer = kmalloc(dev->interrupt_in_endpoint_size, GFP_KERNEL); + if (!dev->interrupt_in_buffer) { + dev_err(&intf->dev, "Couldn't allocate interrupt_in_buffer\n"); + goto error; + } + dev->interrupt_in_urb = usb_alloc_urb(0, GFP_KERNEL); + if (!dev->interrupt_in_urb) { + dev_err(&intf->dev, "Couldn't allocate interrupt_in_urb\n"); + goto error; + } + dev->interrupt_out_endpoint_size = dev->interrupt_out_endpoint ? le16_to_cpu(dev->interrupt_out_endpoint->wMaxPacketSize) : + udev->descriptor.bMaxPacketSize0; + dev->interrupt_out_buffer = kmalloc(write_buffer_size*dev->interrupt_out_endpoint_size, GFP_KERNEL); + if (!dev->interrupt_out_buffer) { + dev_err(&intf->dev, "Couldn't allocate interrupt_out_buffer\n"); + goto error; + } + dev->interrupt_out_urb = usb_alloc_urb(0, GFP_KERNEL); + if (!dev->interrupt_out_urb) { + dev_err(&intf->dev, "Couldn't allocate interrupt_out_urb\n"); + goto error; + } + dev->interrupt_in_interval = min_interrupt_in_interval > dev->interrupt_in_endpoint->bInterval ? min_interrupt_in_interval : dev->interrupt_in_endpoint->bInterval; + if (dev->interrupt_out_endpoint) + dev->interrupt_out_interval = min_interrupt_out_interval > dev->interrupt_out_endpoint->bInterval ? min_interrupt_out_interval : dev->interrupt_out_endpoint->bInterval; + + /* we can register the device now, as it is ready */ + usb_set_intfdata(intf, dev); + + retval = usb_register_dev(intf, &ld_usb_class); + if (retval) { + /* something prevented us from registering this driver */ + dev_err(&intf->dev, "Not able to get a minor for this device.\n"); + usb_set_intfdata(intf, NULL); + goto error; + } + + /* let the user know what node this device is now attached to */ + dev_info(&intf->dev, "LD USB Device #%d now attached to major %d minor %d\n", + (intf->minor - USB_LD_MINOR_BASE), USB_MAJOR, intf->minor); + +exit: + return retval; + +error: + ld_usb_delete(dev); + + return retval; +} + +/** + * ld_usb_disconnect + * + * Called by the usb core when the device is removed from the system. + */ +static void ld_usb_disconnect(struct usb_interface *intf) +{ + struct ld_usb *dev; + int minor; + + down(&disconnect_sem); + + dev = usb_get_intfdata(intf); + usb_set_intfdata(intf, NULL); + + down(&dev->sem); + + minor = intf->minor; + + /* give back our minor */ + usb_deregister_dev(intf, &ld_usb_class); + + /* if the device is not opened, then we clean up right now */ + if (!dev->open_count) { + up(&dev->sem); + ld_usb_delete(dev); + } else { + dev->intf = NULL; + up(&dev->sem); + } + + up(&disconnect_sem); + + dev_info(&intf->dev, "LD USB Device #%d now disconnected\n", + (minor - USB_LD_MINOR_BASE)); +} + +/* usb specific object needed to register this driver with the usb subsystem */ +static struct usb_driver ld_usb_driver = { + .owner = THIS_MODULE, + .name = "ldusb", + .probe = ld_usb_probe, + .disconnect = ld_usb_disconnect, + .id_table = ld_usb_table, +}; + +/** + * ld_usb_init + */ +static int __init ld_usb_init(void) +{ + int retval; + + /* register this driver with the USB subsystem */ + retval = usb_register(&ld_usb_driver); + if (retval) + err("usb_register failed for the "__FILE__" driver. Error number %d\n", retval); + + return retval; +} + +/** + * ld_usb_exit + */ +static void __exit ld_usb_exit(void) +{ + /* deregister this driver with the USB subsystem */ + usb_deregister(&ld_usb_driver); +} + +module_init(ld_usb_init); +module_exit(ld_usb_exit); + diff --git a/drivers/usb/mon/mon_text.c b/drivers/usb/mon/mon_text.c index 755a4570477..26266b30028 100644 --- a/drivers/usb/mon/mon_text.c +++ b/drivers/usb/mon/mon_text.c @@ -19,11 +19,16 @@ #define DATA_MAX 32 /* + * Defined by USB 2.0 clause 9.3, table 9.2. + */ +#define SETUP_MAX 8 + +/* * This limit exists to prevent OOMs when the user process stops reading. */ #define EVENT_MAX 25 -#define PRINTF_DFL 120 +#define PRINTF_DFL 130 struct mon_event_text { struct list_head e_link; @@ -33,7 +38,9 @@ struct mon_event_text { unsigned int tstamp; int length; /* Depends on type: xfer length or act length */ int status; + char setup_flag; char data_flag; + unsigned char setup[SETUP_MAX]; unsigned char data[DATA_MAX]; }; @@ -64,6 +71,22 @@ static void mon_text_dtor(void *, kmem_cache_t *, unsigned long); * This is called with the whole mon_bus locked, so no additional lock. */ +static inline char mon_text_get_setup(struct mon_event_text *ep, + struct urb *urb, char ev_type) +{ + + if (!usb_pipecontrol(urb->pipe) || ev_type != 'S') + return '-'; + + if (urb->transfer_flags & URB_NO_SETUP_DMA_MAP) + return 'D'; + if (urb->setup_packet == NULL) + return 'Z'; /* '0' would be not as pretty. */ + + memcpy(ep->setup, urb->setup_packet, SETUP_MAX); + return 0; +} + static inline char mon_text_get_data(struct mon_event_text *ep, struct urb *urb, int len, char ev_type) { @@ -90,7 +113,6 @@ static inline char mon_text_get_data(struct mon_event_text *ep, struct urb *urb, /* * Bulk is easy to shortcut reliably. - * XXX Control needs setup packet taken. * XXX Other pipe types need consideration. Currently, we overdo it * and collect garbage for them: better more than less. */ @@ -144,6 +166,7 @@ static void mon_text_event(struct mon_reader_text *rp, struct urb *urb, /* Collecting status makes debugging sense for submits, too */ ep->status = urb->status; + ep->setup_flag = mon_text_get_setup(ep, urb, ev_type); ep->data_flag = mon_text_get_data(ep, urb, ep->length, ev_type); rp->nevents++; @@ -299,10 +322,25 @@ static ssize_t mon_text_read(struct file *file, char __user *buf, default: /* PIPE_BULK */ utype = 'B'; } cnt += snprintf(pbuf + cnt, limit - cnt, - "%lx %u %c %c%c:%03u:%02u %d %d", + "%lx %u %c %c%c:%03u:%02u", ep->id, ep->tstamp, ep->type, - utype, udir, usb_pipedevice(ep->pipe), usb_pipeendpoint(ep->pipe), - ep->status, ep->length); + utype, udir, usb_pipedevice(ep->pipe), usb_pipeendpoint(ep->pipe)); + + if (ep->setup_flag == 0) { /* Setup packet is present and captured */ + cnt += snprintf(pbuf + cnt, limit - cnt, + " s %02x %02x %04x %04x %04x", + ep->setup[0], + ep->setup[1], + (ep->setup[3] << 8) | ep->setup[2], + (ep->setup[5] << 8) | ep->setup[4], + (ep->setup[7] << 8) | ep->setup[6]); + } else if (ep->setup_flag != '-') { /* Unable to capture setup packet */ + cnt += snprintf(pbuf + cnt, limit - cnt, + " %c __ __ ____ ____ ____", ep->setup_flag); + } else { /* No setup for this kind of URB */ + cnt += snprintf(pbuf + cnt, limit - cnt, " %d", ep->status); + } + cnt += snprintf(pbuf + cnt, limit - cnt, " %d", ep->length); if ((data_len = ep->length) > 0) { if (ep->data_flag == 0) { diff --git a/drivers/usb/net/kaweth.c b/drivers/usb/net/kaweth.c index fd6ff4cb2c6..7ffa99b9760 100644 --- a/drivers/usb/net/kaweth.c +++ b/drivers/usb/net/kaweth.c @@ -477,7 +477,7 @@ static int kaweth_reset(struct kaweth_device *kaweth) } static void kaweth_usb_receive(struct urb *, struct pt_regs *regs); -static int kaweth_resubmit_rx_urb(struct kaweth_device *, int); +static int kaweth_resubmit_rx_urb(struct kaweth_device *, unsigned); /**************************************************************** int_callback @@ -550,7 +550,7 @@ static void kaweth_resubmit_tl(void *d) * kaweth_resubmit_rx_urb ****************************************************************/ static int kaweth_resubmit_rx_urb(struct kaweth_device *kaweth, - int mem_flags) + unsigned mem_flags) { int result; diff --git a/drivers/usb/net/usbnet.c b/drivers/usb/net/usbnet.c index 8a945f4f369..576f3b852fc 100644 --- a/drivers/usb/net/usbnet.c +++ b/drivers/usb/net/usbnet.c @@ -3227,9 +3227,9 @@ static int usbnet_stop (struct net_device *net) temp = unlink_urbs (dev, &dev->txq) + unlink_urbs (dev, &dev->rxq); // maybe wait for deletions to finish. - while (skb_queue_len (&dev->rxq) - && skb_queue_len (&dev->txq) - && skb_queue_len (&dev->done)) { + while (!skb_queue_empty(&dev->rxq) && + !skb_queue_empty(&dev->txq) && + !skb_queue_empty(&dev->done)) { msleep(UNLINK_TIMEOUT_MS); if (netif_msg_ifdown (dev)) devdbg (dev, "waited for %d urb completions", temp); diff --git a/drivers/usb/serial/ftdi_sio.c b/drivers/usb/serial/ftdi_sio.c index d882fa3ad19..0b03ddab53d 100644 --- a/drivers/usb/serial/ftdi_sio.c +++ b/drivers/usb/serial/ftdi_sio.c @@ -264,16 +264,26 @@ /* * Version Information */ -#define DRIVER_VERSION "v1.4.2" +#define DRIVER_VERSION "v1.4.3" #define DRIVER_AUTHOR "Greg Kroah-Hartman <greg@kroah.com>, Bill Ryder <bryder@sgi.com>, Kuba Ober <kuba@mareimbrium.org>" #define DRIVER_DESC "USB FTDI Serial Converters Driver" static int debug; -static struct usb_device_id id_table_sio [] = { - { USB_DEVICE(FTDI_VID, FTDI_SIO_PID) }, - { USB_DEVICE(MOBILITY_VID, MOBILITY_USB_SERIAL_PID) }, - { } /* Terminating entry */ +/* struct ftdi_sio_quirk is used by devices requiring special attention. */ +struct ftdi_sio_quirk { + void (*setup)(struct usb_serial *); /* Special settings during startup. */ +}; + +static void ftdi_USB_UIRT_setup (struct usb_serial *serial); +static void ftdi_HE_TIRA1_setup (struct usb_serial *serial); + +static struct ftdi_sio_quirk ftdi_USB_UIRT_quirk = { + .setup = ftdi_USB_UIRT_setup, +}; + +static struct ftdi_sio_quirk ftdi_HE_TIRA1_quirk = { + .setup = ftdi_HE_TIRA1_setup, }; /* @@ -288,237 +298,11 @@ static struct usb_device_id id_table_sio [] = { * the bcdDevice value is used to differentiate FT232BM and FT245BM from * the earlier FT8U232AM and FT8U232BM. For now, include all known VID/PID * combinations in both tables. - * FIXME: perhaps bcdDevice can also identify 12MHz devices, but I don't know - * if those ever went into mass production. [Ian Abbott] + * FIXME: perhaps bcdDevice can also identify 12MHz FT8U232AM devices, + * but I don't know if those ever went into mass production. [Ian Abbott] */ -static struct usb_device_id id_table_8U232AM [] = { - { USB_DEVICE_VER(FTDI_VID, FTDI_IRTRANS_PID, 0, 0x3ff) }, - { USB_DEVICE_VER(FTDI_VID, FTDI_8U232AM_PID, 0, 0x3ff) }, - { USB_DEVICE_VER(FTDI_VID, FTDI_8U232AM_ALT_PID, 0, 0x3ff) }, - { USB_DEVICE_VER(FTDI_VID, FTDI_RELAIS_PID, 0, 0x3ff) }, - { USB_DEVICE(INTERBIOMETRICS_VID, INTERBIOMETRICS_IOBOARD_PID) }, - { USB_DEVICE(INTERBIOMETRICS_VID, INTERBIOMETRICS_MINI_IOBOARD_PID) }, - { USB_DEVICE_VER(FTDI_NF_RIC_VID, FTDI_NF_RIC_PID, 0, 0x3ff) }, - { USB_DEVICE_VER(FTDI_VID, FTDI_XF_632_PID, 0, 0x3ff) }, - { USB_DEVICE_VER(FTDI_VID, FTDI_XF_634_PID, 0, 0x3ff) }, - { USB_DEVICE_VER(FTDI_VID, FTDI_XF_547_PID, 0, 0x3ff) }, - { USB_DEVICE_VER(FTDI_VID, FTDI_XF_633_PID, 0, 0x3ff) }, - { USB_DEVICE_VER(FTDI_VID, FTDI_XF_631_PID, 0, 0x3ff) }, - { USB_DEVICE_VER(FTDI_VID, FTDI_XF_635_PID, 0, 0x3ff) }, - { USB_DEVICE_VER(FTDI_VID, FTDI_XF_640_PID, 0, 0x3ff) }, - { USB_DEVICE_VER(FTDI_VID, FTDI_XF_642_PID, 0, 0x3ff) }, - { USB_DEVICE_VER(FTDI_VID, FTDI_VNHCPCUSB_D_PID, 0, 0x3ff) }, - { USB_DEVICE_VER(FTDI_VID, FTDI_DSS20_PID, 0, 0x3ff) }, - { USB_DEVICE_VER(SEALEVEL_VID, SEALEVEL_2101_PID, 0, 0x3ff) }, - { USB_DEVICE_VER(SEALEVEL_VID, SEALEVEL_2102_PID, 0, 0x3ff) }, - { USB_DEVICE_VER(SEALEVEL_VID, SEALEVEL_2103_PID, 0, 0x3ff) }, - { USB_DEVICE_VER(SEALEVEL_VID, SEALEVEL_2104_PID, 0, 0x3ff) }, - { USB_DEVICE_VER(SEALEVEL_VID, SEALEVEL_2201_1_PID, 0, 0x3ff) }, - { USB_DEVICE_VER(SEALEVEL_VID, SEALEVEL_2201_2_PID, 0, 0x3ff) }, - { USB_DEVICE_VER(SEALEVEL_VID, SEALEVEL_2202_1_PID, 0, 0x3ff) }, - { USB_DEVICE_VER(SEALEVEL_VID, SEALEVEL_2202_2_PID, 0, 0x3ff) }, - { USB_DEVICE_VER(SEALEVEL_VID, SEALEVEL_2203_1_PID, 0, 0x3ff) }, - { USB_DEVICE_VER(SEALEVEL_VID, SEALEVEL_2203_2_PID, 0, 0x3ff) }, - { USB_DEVICE_VER(SEALEVEL_VID, SEALEVEL_2401_1_PID, 0, 0x3ff) }, - { USB_DEVICE_VER(SEALEVEL_VID, SEALEVEL_2401_2_PID, 0, 0x3ff) }, - { USB_DEVICE_VER(SEALEVEL_VID, SEALEVEL_2401_3_PID, 0, 0x3ff) }, - { USB_DEVICE_VER(SEALEVEL_VID, SEALEVEL_2401_4_PID, 0, 0x3ff) }, - { USB_DEVICE_VER(SEALEVEL_VID, SEALEVEL_2402_1_PID, 0, 0x3ff) }, - { USB_DEVICE_VER(SEALEVEL_VID, SEALEVEL_2402_2_PID, 0, 0x3ff) }, - { USB_DEVICE_VER(SEALEVEL_VID, SEALEVEL_2402_3_PID, 0, 0x3ff) }, - { USB_DEVICE_VER(SEALEVEL_VID, SEALEVEL_2402_4_PID, 0, 0x3ff) }, - { USB_DEVICE_VER(SEALEVEL_VID, SEALEVEL_2403_1_PID, 0, 0x3ff) }, - { USB_DEVICE_VER(SEALEVEL_VID, SEALEVEL_2403_2_PID, 0, 0x3ff) }, - { USB_DEVICE_VER(SEALEVEL_VID, SEALEVEL_2403_3_PID, 0, 0x3ff) }, - { USB_DEVICE_VER(SEALEVEL_VID, SEALEVEL_2403_4_PID, 0, 0x3ff) }, - { USB_DEVICE_VER(SEALEVEL_VID, SEALEVEL_2801_1_PID, 0, 0x3ff) }, - { USB_DEVICE_VER(SEALEVEL_VID, SEALEVEL_2801_2_PID, 0, 0x3ff) }, - { USB_DEVICE_VER(SEALEVEL_VID, SEALEVEL_2801_3_PID, 0, 0x3ff) }, - { USB_DEVICE_VER(SEALEVEL_VID, SEALEVEL_2801_4_PID, 0, 0x3ff) }, - { USB_DEVICE_VER(SEALEVEL_VID, SEALEVEL_2801_5_PID, 0, 0x3ff) }, - { USB_DEVICE_VER(SEALEVEL_VID, SEALEVEL_2801_6_PID, 0, 0x3ff) }, - { USB_DEVICE_VER(SEALEVEL_VID, SEALEVEL_2801_7_PID, 0, 0x3ff) }, - { USB_DEVICE_VER(SEALEVEL_VID, SEALEVEL_2801_8_PID, 0, 0x3ff) }, - { USB_DEVICE_VER(SEALEVEL_VID, SEALEVEL_2802_1_PID, 0, 0x3ff) }, - { USB_DEVICE_VER(SEALEVEL_VID, SEALEVEL_2802_2_PID, 0, 0x3ff) }, - { USB_DEVICE_VER(SEALEVEL_VID, SEALEVEL_2802_3_PID, 0, 0x3ff) }, - { USB_DEVICE_VER(SEALEVEL_VID, SEALEVEL_2802_4_PID, 0, 0x3ff) }, - { USB_DEVICE_VER(SEALEVEL_VID, SEALEVEL_2802_5_PID, 0, 0x3ff) }, - { USB_DEVICE_VER(SEALEVEL_VID, SEALEVEL_2802_6_PID, 0, 0x3ff) }, - { USB_DEVICE_VER(SEALEVEL_VID, SEALEVEL_2802_7_PID, 0, 0x3ff) }, - { USB_DEVICE_VER(SEALEVEL_VID, SEALEVEL_2802_8_PID, 0, 0x3ff) }, - { USB_DEVICE_VER(SEALEVEL_VID, SEALEVEL_2803_1_PID, 0, 0x3ff) }, - { USB_DEVICE_VER(SEALEVEL_VID, SEALEVEL_2803_2_PID, 0, 0x3ff) }, - { USB_DEVICE_VER(SEALEVEL_VID, SEALEVEL_2803_3_PID, 0, 0x3ff) }, - { USB_DEVICE_VER(SEALEVEL_VID, SEALEVEL_2803_4_PID, 0, 0x3ff) }, - { USB_DEVICE_VER(SEALEVEL_VID, SEALEVEL_2803_5_PID, 0, 0x3ff) }, - { USB_DEVICE_VER(SEALEVEL_VID, SEALEVEL_2803_6_PID, 0, 0x3ff) }, - { USB_DEVICE_VER(SEALEVEL_VID, SEALEVEL_2803_7_PID, 0, 0x3ff) }, - { USB_DEVICE_VER(SEALEVEL_VID, SEALEVEL_2803_8_PID, 0, 0x3ff) }, - { USB_DEVICE_VER(IDTECH_VID, IDTECH_IDT1221U_PID, 0, 0x3ff) }, - { USB_DEVICE_VER(OCT_VID, OCT_US101_PID, 0, 0x3ff) }, - { USB_DEVICE_VER(FTDI_VID, PROTEGO_SPECIAL_1, 0, 0x3ff) }, - { USB_DEVICE_VER(FTDI_VID, PROTEGO_R2X0, 0, 0x3ff) }, - { USB_DEVICE_VER(FTDI_VID, PROTEGO_SPECIAL_3, 0, 0x3ff) }, - { USB_DEVICE_VER(FTDI_VID, PROTEGO_SPECIAL_4, 0, 0x3ff) }, - { USB_DEVICE_VER(FTDI_VID, FTDI_ELV_UO100_PID, 0, 0x3ff) }, - { USB_DEVICE_VER(FTDI_VID, FTDI_ELV_UM100_PID, 0, 0x3ff) }, - { USB_DEVICE_VER(FTDI_VID, INSIDE_ACCESSO, 0, 0x3ff) }, - { USB_DEVICE_VER(INTREPID_VID, INTREPID_VALUECAN_PID, 0, 0x3ff) }, - { USB_DEVICE_VER(INTREPID_VID, INTREPID_NEOVI_PID, 0, 0x3ff) }, - { USB_DEVICE_VER(FALCOM_VID, FALCOM_TWIST_PID, 0, 0x3ff) }, - { USB_DEVICE_VER(FTDI_VID, FTDI_SUUNTO_SPORTS_PID, 0, 0x3ff) }, - { USB_DEVICE_VER(FTDI_VID, FTDI_RM_CANVIEW_PID, 0, 0x3ff) }, - { USB_DEVICE_VER(BANDB_VID, BANDB_USOTL4_PID, 0, 0x3ff) }, - { USB_DEVICE_VER(BANDB_VID, BANDB_USTL4_PID, 0, 0x3ff) }, - { USB_DEVICE_VER(BANDB_VID, BANDB_USO9ML2_PID, 0, 0x3ff) }, - { USB_DEVICE_VER(FTDI_VID, EVER_ECO_PRO_CDS, 0, 0x3ff) }, - { USB_DEVICE_VER(FTDI_VID, FTDI_4N_GALAXY_DE_0_PID, 0, 0x3ff) }, - { USB_DEVICE_VER(FTDI_VID, FTDI_4N_GALAXY_DE_1_PID, 0, 0x3ff) }, - { USB_DEVICE_VER(FTDI_VID, FTDI_4N_GALAXY_DE_2_PID, 0, 0x3ff) }, - { } /* Terminating entry */ -}; - - -static struct usb_device_id id_table_FT232BM [] = { - { USB_DEVICE_VER(FTDI_VID, FTDI_IRTRANS_PID, 0x400, 0xffff) }, - { USB_DEVICE_VER(FTDI_VID, FTDI_8U232AM_PID, 0x400, 0xffff) }, - { USB_DEVICE_VER(FTDI_VID, FTDI_8U232AM_ALT_PID, 0x400, 0xffff) }, - { USB_DEVICE_VER(FTDI_VID, FTDI_RELAIS_PID, 0x400, 0xffff) }, - { USB_DEVICE_VER(FTDI_NF_RIC_VID, FTDI_NF_RIC_PID, 0x400, 0xffff) }, - { USB_DEVICE_VER(FTDI_VID, FTDI_XF_632_PID, 0x400, 0xffff) }, - { USB_DEVICE_VER(FTDI_VID, FTDI_XF_634_PID, 0x400, 0xffff) }, - { USB_DEVICE_VER(FTDI_VID, FTDI_XF_547_PID, 0x400, 0xffff) }, - { USB_DEVICE_VER(FTDI_VID, FTDI_XF_633_PID, 0x400, 0xffff) }, - { USB_DEVICE_VER(FTDI_VID, FTDI_XF_631_PID, 0x400, 0xffff) }, - { USB_DEVICE_VER(FTDI_VID, FTDI_XF_635_PID, 0x400, 0xffff) }, - { USB_DEVICE_VER(FTDI_VID, FTDI_XF_640_PID, 0x400, 0xffff) }, - { USB_DEVICE_VER(FTDI_VID, FTDI_XF_642_PID, 0x400, 0xffff) }, - { USB_DEVICE_VER(FTDI_VID, FTDI_VNHCPCUSB_D_PID, 0x400, 0xffff) }, - { USB_DEVICE_VER(FTDI_VID, FTDI_DSS20_PID, 0x400, 0xffff) }, - { USB_DEVICE_VER(FTDI_VID, FTDI_MTXORB_0_PID, 0x400, 0xffff) }, - { USB_DEVICE_VER(FTDI_VID, FTDI_MTXORB_1_PID, 0x400, 0xffff) }, - { USB_DEVICE_VER(FTDI_VID, FTDI_MTXORB_2_PID, 0x400, 0xffff) }, - { USB_DEVICE_VER(FTDI_VID, FTDI_MTXORB_3_PID, 0x400, 0xffff) }, - { USB_DEVICE_VER(FTDI_VID, FTDI_MTXORB_4_PID, 0x400, 0xffff) }, - { USB_DEVICE_VER(FTDI_VID, FTDI_MTXORB_5_PID, 0x400, 0xffff) }, - { USB_DEVICE_VER(FTDI_VID, FTDI_MTXORB_6_PID, 0x400, 0xffff) }, - { USB_DEVICE_VER(FTDI_VID, FTDI_PERLE_ULTRAPORT_PID, 0x400, 0xffff) }, - { USB_DEVICE_VER(FTDI_VID, FTDI_PIEGROUP_PID, 0x400, 0xffff) }, - { USB_DEVICE_VER(SEALEVEL_VID, SEALEVEL_2101_PID, 0x400, 0xffff) }, - { USB_DEVICE_VER(SEALEVEL_VID, SEALEVEL_2102_PID, 0x400, 0xffff) }, - { USB_DEVICE_VER(SEALEVEL_VID, SEALEVEL_2103_PID, 0x400, 0xffff) }, - { USB_DEVICE_VER(SEALEVEL_VID, SEALEVEL_2104_PID, 0x400, 0xffff) }, - { USB_DEVICE_VER(SEALEVEL_VID, SEALEVEL_2201_1_PID, 0x400, 0xffff) }, - { USB_DEVICE_VER(SEALEVEL_VID, SEALEVEL_2201_2_PID, 0x400, 0xffff) }, - { USB_DEVICE_VER(SEALEVEL_VID, SEALEVEL_2202_1_PID, 0x400, 0xffff) }, - { USB_DEVICE_VER(SEALEVEL_VID, SEALEVEL_2202_2_PID, 0x400, 0xffff) }, - { USB_DEVICE_VER(SEALEVEL_VID, SEALEVEL_2203_1_PID, 0x400, 0xffff) }, - { USB_DEVICE_VER(SEALEVEL_VID, SEALEVEL_2203_2_PID, 0x400, 0xffff) }, - { USB_DEVICE_VER(SEALEVEL_VID, SEALEVEL_2401_1_PID, 0x400, 0xffff) }, - { USB_DEVICE_VER(SEALEVEL_VID, SEALEVEL_2401_2_PID, 0x400, 0xffff) }, - { USB_DEVICE_VER(SEALEVEL_VID, SEALEVEL_2401_3_PID, 0x400, 0xffff) }, - { USB_DEVICE_VER(SEALEVEL_VID, SEALEVEL_2401_4_PID, 0x400, 0xffff) }, - { USB_DEVICE_VER(SEALEVEL_VID, SEALEVEL_2402_1_PID, 0x400, 0xffff) }, - { USB_DEVICE_VER(SEALEVEL_VID, SEALEVEL_2402_2_PID, 0x400, 0xffff) }, - { USB_DEVICE_VER(SEALEVEL_VID, SEALEVEL_2402_3_PID, 0x400, 0xffff) }, - { USB_DEVICE_VER(SEALEVEL_VID, SEALEVEL_2402_4_PID, 0x400, 0xffff) }, - { USB_DEVICE_VER(SEALEVEL_VID, SEALEVEL_2403_1_PID, 0x400, 0xffff) }, - { USB_DEVICE_VER(SEALEVEL_VID, SEALEVEL_2403_2_PID, 0x400, 0xffff) }, - { USB_DEVICE_VER(SEALEVEL_VID, SEALEVEL_2403_3_PID, 0x400, 0xffff) }, - { USB_DEVICE_VER(SEALEVEL_VID, SEALEVEL_2403_4_PID, 0x400, 0xffff) }, - { USB_DEVICE_VER(SEALEVEL_VID, SEALEVEL_2801_1_PID, 0x400, 0xffff) }, - { USB_DEVICE_VER(SEALEVEL_VID, SEALEVEL_2801_2_PID, 0x400, 0xffff) }, - { USB_DEVICE_VER(SEALEVEL_VID, SEALEVEL_2801_3_PID, 0x400, 0xffff) }, - { USB_DEVICE_VER(SEALEVEL_VID, SEALEVEL_2801_4_PID, 0x400, 0xffff) }, - { USB_DEVICE_VER(SEALEVEL_VID, SEALEVEL_2801_5_PID, 0x400, 0xffff) }, - { USB_DEVICE_VER(SEALEVEL_VID, SEALEVEL_2801_6_PID, 0x400, 0xffff) }, - { USB_DEVICE_VER(SEALEVEL_VID, SEALEVEL_2801_7_PID, 0x400, 0xffff) }, - { USB_DEVICE_VER(SEALEVEL_VID, SEALEVEL_2801_8_PID, 0x400, 0xffff) }, - { USB_DEVICE_VER(SEALEVEL_VID, SEALEVEL_2802_1_PID, 0x400, 0xffff) }, - { USB_DEVICE_VER(SEALEVEL_VID, SEALEVEL_2802_2_PID, 0x400, 0xffff) }, - { USB_DEVICE_VER(SEALEVEL_VID, SEALEVEL_2802_3_PID, 0x400, 0xffff) }, - { USB_DEVICE_VER(SEALEVEL_VID, SEALEVEL_2802_4_PID, 0x400, 0xffff) }, - { USB_DEVICE_VER(SEALEVEL_VID, SEALEVEL_2802_5_PID, 0x400, 0xffff) }, - { USB_DEVICE_VER(SEALEVEL_VID, SEALEVEL_2802_6_PID, 0x400, 0xffff) }, - { USB_DEVICE_VER(SEALEVEL_VID, SEALEVEL_2802_7_PID, 0x400, 0xffff) }, - { USB_DEVICE_VER(SEALEVEL_VID, SEALEVEL_2802_8_PID, 0x400, 0xffff) }, - { USB_DEVICE_VER(SEALEVEL_VID, SEALEVEL_2803_1_PID, 0x400, 0xffff) }, - { USB_DEVICE_VER(SEALEVEL_VID, SEALEVEL_2803_2_PID, 0x400, 0xffff) }, - { USB_DEVICE_VER(SEALEVEL_VID, SEALEVEL_2803_3_PID, 0x400, 0xffff) }, - { USB_DEVICE_VER(SEALEVEL_VID, SEALEVEL_2803_4_PID, 0x400, 0xffff) }, - { USB_DEVICE_VER(SEALEVEL_VID, SEALEVEL_2803_5_PID, 0x400, 0xffff) }, - { USB_DEVICE_VER(SEALEVEL_VID, SEALEVEL_2803_6_PID, 0x400, 0xffff) }, - { USB_DEVICE_VER(SEALEVEL_VID, SEALEVEL_2803_7_PID, 0x400, 0xffff) }, - { USB_DEVICE_VER(SEALEVEL_VID, SEALEVEL_2803_8_PID, 0x400, 0xffff) }, - { USB_DEVICE_VER(IDTECH_VID, IDTECH_IDT1221U_PID, 0x400, 0xffff) }, - { USB_DEVICE_VER(OCT_VID, OCT_US101_PID, 0x400, 0xffff) }, - { USB_DEVICE_VER(FTDI_VID, PROTEGO_SPECIAL_1, 0x400, 0xffff) }, - { USB_DEVICE_VER(FTDI_VID, PROTEGO_R2X0, 0x400, 0xffff) }, - { USB_DEVICE_VER(FTDI_VID, PROTEGO_SPECIAL_3, 0x400, 0xffff) }, - { USB_DEVICE_VER(FTDI_VID, PROTEGO_SPECIAL_4, 0x400, 0xffff) }, - { USB_DEVICE_VER(FTDI_VID, FTDI_GUDEADS_E808_PID, 0x400, 0xffff) }, - { USB_DEVICE_VER(FTDI_VID, FTDI_GUDEADS_E809_PID, 0x400, 0xffff) }, - { USB_DEVICE_VER(FTDI_VID, FTDI_GUDEADS_E80A_PID, 0x400, 0xffff) }, - { USB_DEVICE_VER(FTDI_VID, FTDI_GUDEADS_E80B_PID, 0x400, 0xffff) }, - { USB_DEVICE_VER(FTDI_VID, FTDI_GUDEADS_E80C_PID, 0x400, 0xffff) }, - { USB_DEVICE_VER(FTDI_VID, FTDI_GUDEADS_E80D_PID, 0x400, 0xffff) }, - { USB_DEVICE_VER(FTDI_VID, FTDI_GUDEADS_E80E_PID, 0x400, 0xffff) }, - { USB_DEVICE_VER(FTDI_VID, FTDI_GUDEADS_E80F_PID, 0x400, 0xffff) }, - { USB_DEVICE_VER(FTDI_VID, FTDI_GUDEADS_E888_PID, 0x400, 0xffff) }, - { USB_DEVICE_VER(FTDI_VID, FTDI_GUDEADS_E889_PID, 0x400, 0xffff) }, - { USB_DEVICE_VER(FTDI_VID, FTDI_GUDEADS_E88A_PID, 0x400, 0xffff) }, - { USB_DEVICE_VER(FTDI_VID, FTDI_GUDEADS_E88B_PID, 0x400, 0xffff) }, - { USB_DEVICE_VER(FTDI_VID, FTDI_GUDEADS_E88C_PID, 0x400, 0xffff) }, - { USB_DEVICE_VER(FTDI_VID, FTDI_GUDEADS_E88D_PID, 0x400, 0xffff) }, - { USB_DEVICE_VER(FTDI_VID, FTDI_GUDEADS_E88E_PID, 0x400, 0xffff) }, - { USB_DEVICE_VER(FTDI_VID, FTDI_GUDEADS_E88F_PID, 0x400, 0xffff) }, - { USB_DEVICE_VER(FTDI_VID, FTDI_ELV_UO100_PID, 0x400, 0xffff) }, - { USB_DEVICE_VER(FTDI_VID, FTDI_ELV_UM100_PID, 0x400, 0xffff) }, - { USB_DEVICE_VER(FTDI_VID, LINX_SDMUSBQSS_PID, 0x400, 0xffff) }, - { USB_DEVICE_VER(FTDI_VID, LINX_MASTERDEVEL2_PID, 0x400, 0xffff) }, - { USB_DEVICE_VER(FTDI_VID, LINX_FUTURE_0_PID, 0x400, 0xffff) }, - { USB_DEVICE_VER(FTDI_VID, LINX_FUTURE_1_PID, 0x400, 0xffff) }, - { USB_DEVICE_VER(FTDI_VID, LINX_FUTURE_2_PID, 0x400, 0xffff) }, - { USB_DEVICE(FTDI_VID, FTDI_CCSICDU20_0_PID) }, - { USB_DEVICE(FTDI_VID, FTDI_CCSICDU40_1_PID) }, - { USB_DEVICE_VER(FTDI_VID, INSIDE_ACCESSO, 0x400, 0xffff) }, - { USB_DEVICE_VER(INTREPID_VID, INTREPID_VALUECAN_PID, 0x400, 0xffff) }, - { USB_DEVICE_VER(INTREPID_VID, INTREPID_NEOVI_PID, 0x400, 0xffff) }, - { USB_DEVICE_VER(FALCOM_VID, FALCOM_TWIST_PID, 0x400, 0xffff) }, - { USB_DEVICE_VER(FTDI_VID, FTDI_SUUNTO_SPORTS_PID, 0x400, 0xffff) }, - { USB_DEVICE_VER(FTDI_VID, FTDI_RM_CANVIEW_PID, 0x400, 0xffff) }, - { USB_DEVICE_VER(BANDB_VID, BANDB_USOTL4_PID, 0x400, 0xffff) }, - { USB_DEVICE_VER(BANDB_VID, BANDB_USTL4_PID, 0x400, 0xffff) }, - { USB_DEVICE_VER(BANDB_VID, BANDB_USO9ML2_PID, 0x400, 0xffff) }, - { USB_DEVICE_VER(FTDI_VID, EVER_ECO_PRO_CDS, 0x400, 0xffff) }, - { USB_DEVICE_VER(FTDI_VID, FTDI_4N_GALAXY_DE_0_PID, 0x400, 0xffff) }, - { USB_DEVICE_VER(FTDI_VID, FTDI_4N_GALAXY_DE_1_PID, 0x400, 0xffff) }, - { USB_DEVICE_VER(FTDI_VID, FTDI_4N_GALAXY_DE_2_PID, 0x400, 0xffff) }, - { USB_DEVICE_VER(FTDI_VID, FTDI_ACTIVE_ROBOTS_PID, 0x400, 0xffff) }, - { } /* Terminating entry */ -}; - - -static struct usb_device_id id_table_USB_UIRT [] = { - { USB_DEVICE(FTDI_VID, FTDI_USB_UIRT_PID) }, - { } /* Terminating entry */ -}; - - -static struct usb_device_id id_table_HE_TIRA1 [] = { - { USB_DEVICE_VER(FTDI_VID, FTDI_HE_TIRA1_PID, 0x400, 0xffff) }, - { } /* Terminating entry */ -}; - - -static struct usb_device_id id_table_FT2232C[] = { - { USB_DEVICE(FTDI_VID, FTDI_8U2232C_PID) }, - { } /* Terminating entry */ -}; - static struct usb_device_id id_table_combined [] = { { USB_DEVICE(FTDI_VID, FTDI_IRTRANS_PID) }, @@ -540,14 +324,14 @@ static struct usb_device_id id_table_combined [] = { { USB_DEVICE(FTDI_VID, FTDI_DSS20_PID) }, { USB_DEVICE(FTDI_NF_RIC_VID, FTDI_NF_RIC_PID) }, { USB_DEVICE(FTDI_VID, FTDI_VNHCPCUSB_D_PID) }, - { USB_DEVICE_VER(FTDI_VID, FTDI_MTXORB_0_PID, 0x400, 0xffff) }, - { USB_DEVICE_VER(FTDI_VID, FTDI_MTXORB_1_PID, 0x400, 0xffff) }, - { USB_DEVICE_VER(FTDI_VID, FTDI_MTXORB_2_PID, 0x400, 0xffff) }, - { USB_DEVICE_VER(FTDI_VID, FTDI_MTXORB_3_PID, 0x400, 0xffff) }, - { USB_DEVICE_VER(FTDI_VID, FTDI_MTXORB_4_PID, 0x400, 0xffff) }, - { USB_DEVICE_VER(FTDI_VID, FTDI_MTXORB_5_PID, 0x400, 0xffff) }, - { USB_DEVICE_VER(FTDI_VID, FTDI_MTXORB_6_PID, 0x400, 0xffff) }, - { USB_DEVICE_VER(FTDI_VID, FTDI_PERLE_ULTRAPORT_PID, 0x400, 0xffff) }, + { USB_DEVICE(FTDI_VID, FTDI_MTXORB_0_PID) }, + { USB_DEVICE(FTDI_VID, FTDI_MTXORB_1_PID) }, + { USB_DEVICE(FTDI_VID, FTDI_MTXORB_2_PID) }, + { USB_DEVICE(FTDI_VID, FTDI_MTXORB_3_PID) }, + { USB_DEVICE(FTDI_VID, FTDI_MTXORB_4_PID) }, + { USB_DEVICE(FTDI_VID, FTDI_MTXORB_5_PID) }, + { USB_DEVICE(FTDI_VID, FTDI_MTXORB_6_PID) }, + { USB_DEVICE(FTDI_VID, FTDI_PERLE_ULTRAPORT_PID) }, { USB_DEVICE(FTDI_VID, FTDI_PIEGROUP_PID) }, { USB_DEVICE(SEALEVEL_VID, SEALEVEL_2101_PID) }, { USB_DEVICE(SEALEVEL_VID, SEALEVEL_2102_PID) }, @@ -597,35 +381,37 @@ static struct usb_device_id id_table_combined [] = { { USB_DEVICE(SEALEVEL_VID, SEALEVEL_2803_8_PID) }, { USB_DEVICE(IDTECH_VID, IDTECH_IDT1221U_PID) }, { USB_DEVICE(OCT_VID, OCT_US101_PID) }, - { USB_DEVICE_VER(FTDI_VID, FTDI_HE_TIRA1_PID, 0x400, 0xffff) }, - { USB_DEVICE(FTDI_VID, FTDI_USB_UIRT_PID) }, + { USB_DEVICE(FTDI_VID, FTDI_HE_TIRA1_PID), + .driver_info = (kernel_ulong_t)&ftdi_HE_TIRA1_quirk }, + { USB_DEVICE(FTDI_VID, FTDI_USB_UIRT_PID), + .driver_info = (kernel_ulong_t)&ftdi_USB_UIRT_quirk }, { USB_DEVICE(FTDI_VID, PROTEGO_SPECIAL_1) }, { USB_DEVICE(FTDI_VID, PROTEGO_R2X0) }, { USB_DEVICE(FTDI_VID, PROTEGO_SPECIAL_3) }, { USB_DEVICE(FTDI_VID, PROTEGO_SPECIAL_4) }, - { USB_DEVICE_VER(FTDI_VID, FTDI_GUDEADS_E808_PID, 0x400, 0xffff) }, - { USB_DEVICE_VER(FTDI_VID, FTDI_GUDEADS_E809_PID, 0x400, 0xffff) }, - { USB_DEVICE_VER(FTDI_VID, FTDI_GUDEADS_E80A_PID, 0x400, 0xffff) }, - { USB_DEVICE_VER(FTDI_VID, FTDI_GUDEADS_E80B_PID, 0x400, 0xffff) }, - { USB_DEVICE_VER(FTDI_VID, FTDI_GUDEADS_E80C_PID, 0x400, 0xffff) }, - { USB_DEVICE_VER(FTDI_VID, FTDI_GUDEADS_E80D_PID, 0x400, 0xffff) }, - { USB_DEVICE_VER(FTDI_VID, FTDI_GUDEADS_E80E_PID, 0x400, 0xffff) }, - { USB_DEVICE_VER(FTDI_VID, FTDI_GUDEADS_E80F_PID, 0x400, 0xffff) }, - { USB_DEVICE_VER(FTDI_VID, FTDI_GUDEADS_E888_PID, 0x400, 0xffff) }, - { USB_DEVICE_VER(FTDI_VID, FTDI_GUDEADS_E889_PID, 0x400, 0xffff) }, - { USB_DEVICE_VER(FTDI_VID, FTDI_GUDEADS_E88A_PID, 0x400, 0xffff) }, - { USB_DEVICE_VER(FTDI_VID, FTDI_GUDEADS_E88B_PID, 0x400, 0xffff) }, - { USB_DEVICE_VER(FTDI_VID, FTDI_GUDEADS_E88C_PID, 0x400, 0xffff) }, - { USB_DEVICE_VER(FTDI_VID, FTDI_GUDEADS_E88D_PID, 0x400, 0xffff) }, - { USB_DEVICE_VER(FTDI_VID, FTDI_GUDEADS_E88E_PID, 0x400, 0xffff) }, - { USB_DEVICE_VER(FTDI_VID, FTDI_GUDEADS_E88F_PID, 0x400, 0xffff) }, + { USB_DEVICE(FTDI_VID, FTDI_GUDEADS_E808_PID) }, + { USB_DEVICE(FTDI_VID, FTDI_GUDEADS_E809_PID) }, + { USB_DEVICE(FTDI_VID, FTDI_GUDEADS_E80A_PID) }, + { USB_DEVICE(FTDI_VID, FTDI_GUDEADS_E80B_PID) }, + { USB_DEVICE(FTDI_VID, FTDI_GUDEADS_E80C_PID) }, + { USB_DEVICE(FTDI_VID, FTDI_GUDEADS_E80D_PID) }, + { USB_DEVICE(FTDI_VID, FTDI_GUDEADS_E80E_PID) }, + { USB_DEVICE(FTDI_VID, FTDI_GUDEADS_E80F_PID) }, + { USB_DEVICE(FTDI_VID, FTDI_GUDEADS_E888_PID) }, + { USB_DEVICE(FTDI_VID, FTDI_GUDEADS_E889_PID) }, + { USB_DEVICE(FTDI_VID, FTDI_GUDEADS_E88A_PID) }, + { USB_DEVICE(FTDI_VID, FTDI_GUDEADS_E88B_PID) }, + { USB_DEVICE(FTDI_VID, FTDI_GUDEADS_E88C_PID) }, + { USB_DEVICE(FTDI_VID, FTDI_GUDEADS_E88D_PID) }, + { USB_DEVICE(FTDI_VID, FTDI_GUDEADS_E88E_PID) }, + { USB_DEVICE(FTDI_VID, FTDI_GUDEADS_E88F_PID) }, { USB_DEVICE(FTDI_VID, FTDI_ELV_UO100_PID) }, { USB_DEVICE(FTDI_VID, FTDI_ELV_UM100_PID) }, - { USB_DEVICE_VER(FTDI_VID, LINX_SDMUSBQSS_PID, 0x400, 0xffff) }, - { USB_DEVICE_VER(FTDI_VID, LINX_MASTERDEVEL2_PID, 0x400, 0xffff) }, - { USB_DEVICE_VER(FTDI_VID, LINX_FUTURE_0_PID, 0x400, 0xffff) }, - { USB_DEVICE_VER(FTDI_VID, LINX_FUTURE_1_PID, 0x400, 0xffff) }, - { USB_DEVICE_VER(FTDI_VID, LINX_FUTURE_2_PID, 0x400, 0xffff) }, + { USB_DEVICE(FTDI_VID, LINX_SDMUSBQSS_PID) }, + { USB_DEVICE(FTDI_VID, LINX_MASTERDEVEL2_PID) }, + { USB_DEVICE(FTDI_VID, LINX_FUTURE_0_PID) }, + { USB_DEVICE(FTDI_VID, LINX_FUTURE_1_PID) }, + { USB_DEVICE(FTDI_VID, LINX_FUTURE_2_PID) }, { USB_DEVICE(FTDI_VID, FTDI_CCSICDU20_0_PID) }, { USB_DEVICE(FTDI_VID, FTDI_CCSICDU40_1_PID) }, { USB_DEVICE(FTDI_VID, INSIDE_ACCESSO) }, @@ -642,7 +428,7 @@ static struct usb_device_id id_table_combined [] = { { USB_DEVICE(FTDI_VID, FTDI_4N_GALAXY_DE_1_PID) }, { USB_DEVICE(FTDI_VID, FTDI_4N_GALAXY_DE_2_PID) }, { USB_DEVICE(MOBILITY_VID, MOBILITY_USB_SERIAL_PID) }, - { USB_DEVICE_VER(FTDI_VID, FTDI_ACTIVE_ROBOTS_PID, 0x400, 0xffff) }, + { USB_DEVICE(FTDI_VID, FTDI_ACTIVE_ROBOTS_PID) }, { } /* Terminating entry */ }; @@ -705,12 +491,8 @@ struct ftdi_private { ASYNC_SPD_CUST | ASYNC_SPD_SHI | ASYNC_SPD_WARP ) /* function prototypes for a FTDI serial converter */ -static int ftdi_SIO_startup (struct usb_serial *serial); -static int ftdi_8U232AM_startup (struct usb_serial *serial); -static int ftdi_FT232BM_startup (struct usb_serial *serial); -static int ftdi_FT2232C_startup (struct usb_serial *serial); -static int ftdi_USB_UIRT_startup (struct usb_serial *serial); -static int ftdi_HE_TIRA1_startup (struct usb_serial *serial); +static int ftdi_sio_probe (struct usb_serial *serial, const struct usb_device_id *id); +static int ftdi_sio_attach (struct usb_serial *serial); static void ftdi_shutdown (struct usb_serial *serial); static int ftdi_open (struct usb_serial_port *port, struct file *filp); static void ftdi_close (struct usb_serial_port *port, struct file *filp); @@ -733,14 +515,16 @@ static unsigned short int ftdi_232am_baud_to_divisor (int baud); static __u32 ftdi_232bm_baud_base_to_divisor (int baud, int base); static __u32 ftdi_232bm_baud_to_divisor (int baud); -static struct usb_serial_device_type ftdi_SIO_device = { +static struct usb_serial_device_type ftdi_sio_device = { .owner = THIS_MODULE, - .name = "FTDI SIO", - .id_table = id_table_sio, + .name = "FTDI USB Serial Device", + .short_name = "ftdi_sio", + .id_table = id_table_combined, .num_interrupt_in = 0, .num_bulk_in = 1, .num_bulk_out = 1, .num_ports = 1, + .probe = ftdi_sio_probe, .open = ftdi_open, .close = ftdi_close, .throttle = ftdi_throttle, @@ -755,143 +539,10 @@ static struct usb_serial_device_type ftdi_SIO_device = { .ioctl = ftdi_ioctl, .set_termios = ftdi_set_termios, .break_ctl = ftdi_break_ctl, - .attach = ftdi_SIO_startup, + .attach = ftdi_sio_attach, .shutdown = ftdi_shutdown, }; -static struct usb_serial_device_type ftdi_8U232AM_device = { - .owner = THIS_MODULE, - .name = "FTDI 8U232AM Compatible", - .id_table = id_table_8U232AM, - .num_interrupt_in = 0, - .num_bulk_in = 1, - .num_bulk_out = 1, - .num_ports = 1, - .open = ftdi_open, - .close = ftdi_close, - .throttle = ftdi_throttle, - .unthrottle = ftdi_unthrottle, - .write = ftdi_write, - .write_room = ftdi_write_room, - .chars_in_buffer = ftdi_chars_in_buffer, - .read_bulk_callback = ftdi_read_bulk_callback, - .write_bulk_callback = ftdi_write_bulk_callback, - .tiocmget = ftdi_tiocmget, - .tiocmset = ftdi_tiocmset, - .ioctl = ftdi_ioctl, - .set_termios = ftdi_set_termios, - .break_ctl = ftdi_break_ctl, - .attach = ftdi_8U232AM_startup, - .shutdown = ftdi_shutdown, -}; - -static struct usb_serial_device_type ftdi_FT232BM_device = { - .owner = THIS_MODULE, - .name = "FTDI FT232BM Compatible", - .id_table = id_table_FT232BM, - .num_interrupt_in = 0, - .num_bulk_in = 1, - .num_bulk_out = 1, - .num_ports = 1, - .open = ftdi_open, - .close = ftdi_close, - .throttle = ftdi_throttle, - .unthrottle = ftdi_unthrottle, - .write = ftdi_write, - .write_room = ftdi_write_room, - .chars_in_buffer = ftdi_chars_in_buffer, - .read_bulk_callback = ftdi_read_bulk_callback, - .write_bulk_callback = ftdi_write_bulk_callback, - .tiocmget = ftdi_tiocmget, - .tiocmset = ftdi_tiocmset, - .ioctl = ftdi_ioctl, - .set_termios = ftdi_set_termios, - .break_ctl = ftdi_break_ctl, - .attach = ftdi_FT232BM_startup, - .shutdown = ftdi_shutdown, -}; - -static struct usb_serial_device_type ftdi_FT2232C_device = { - .owner = THIS_MODULE, - .name = "FTDI FT2232C Compatible", - .id_table = id_table_FT2232C, - .num_interrupt_in = 0, - .num_bulk_in = 1, - .num_bulk_out = 1, - .num_ports = 1, - .open = ftdi_open, - .close = ftdi_close, - .throttle = ftdi_throttle, - .unthrottle = ftdi_unthrottle, - .write = ftdi_write, - .write_room = ftdi_write_room, - .chars_in_buffer = ftdi_chars_in_buffer, - .read_bulk_callback = ftdi_read_bulk_callback, - .write_bulk_callback = ftdi_write_bulk_callback, - .tiocmget = ftdi_tiocmget, - .tiocmset = ftdi_tiocmset, - .ioctl = ftdi_ioctl, - .set_termios = ftdi_set_termios, - .break_ctl = ftdi_break_ctl, - .attach = ftdi_FT2232C_startup, - .shutdown = ftdi_shutdown, -}; - -static struct usb_serial_device_type ftdi_USB_UIRT_device = { - .owner = THIS_MODULE, - .name = "USB-UIRT Infrared Tranceiver", - .id_table = id_table_USB_UIRT, - .num_interrupt_in = 0, - .num_bulk_in = 1, - .num_bulk_out = 1, - .num_ports = 1, - .open = ftdi_open, - .close = ftdi_close, - .throttle = ftdi_throttle, - .unthrottle = ftdi_unthrottle, - .write = ftdi_write, - .write_room = ftdi_write_room, - .chars_in_buffer = ftdi_chars_in_buffer, - .read_bulk_callback = ftdi_read_bulk_callback, - .write_bulk_callback = ftdi_write_bulk_callback, - .tiocmget = ftdi_tiocmget, - .tiocmset = ftdi_tiocmset, - .ioctl = ftdi_ioctl, - .set_termios = ftdi_set_termios, - .break_ctl = ftdi_break_ctl, - .attach = ftdi_USB_UIRT_startup, - .shutdown = ftdi_shutdown, -}; - -/* The TIRA1 is based on a FT232BM which requires a fixed baud rate of 100000 - * and which requires RTS-CTS to be enabled. */ -static struct usb_serial_device_type ftdi_HE_TIRA1_device = { - .owner = THIS_MODULE, - .name = "Home-Electronics TIRA-1 IR Transceiver", - .id_table = id_table_HE_TIRA1, - .num_interrupt_in = 0, - .num_bulk_in = 1, - .num_bulk_out = 1, - .num_ports = 1, - .open = ftdi_open, - .close = ftdi_close, - .throttle = ftdi_throttle, - .unthrottle = ftdi_unthrottle, - .write = ftdi_write, - .write_room = ftdi_write_room, - .chars_in_buffer = ftdi_chars_in_buffer, - .read_bulk_callback = ftdi_read_bulk_callback, - .write_bulk_callback = ftdi_write_bulk_callback, - .tiocmget = ftdi_tiocmget, - .tiocmset = ftdi_tiocmset, - .ioctl = ftdi_ioctl, - .set_termios = ftdi_set_termios, - .break_ctl = ftdi_break_ctl, - .attach = ftdi_HE_TIRA1_startup, - .shutdown = ftdi_shutdown, -}; - - #define WDR_TIMEOUT 5000 /* default urb timeout */ @@ -1212,6 +863,59 @@ check_and_exit: } /* set_serial_info */ +/* Determine type of FTDI chip based on USB config and descriptor. */ +static void ftdi_determine_type(struct usb_serial_port *port) +{ + struct ftdi_private *priv = usb_get_serial_port_data(port); + struct usb_serial *serial = port->serial; + struct usb_device *udev = serial->dev; + unsigned version; + unsigned interfaces; + + /* Assume it is not the original SIO device for now. */ + priv->baud_base = 48000000 / 16; + priv->write_offset = 0; + + version = le16_to_cpu(udev->descriptor.bcdDevice); + interfaces = udev->actconfig->desc.bNumInterfaces; + dbg("%s: bcdDevice = 0x%x, bNumInterfaces = %u", __FUNCTION__, + version, interfaces); + if (interfaces > 1) { + int inter; + + /* Multiple interfaces. Assume FT2232C. */ + priv->chip_type = FT2232C; + /* Determine interface code. */ + inter = serial->interface->altsetting->desc.bInterfaceNumber; + if (inter == 0) { + priv->interface = PIT_SIOA; + } else { + priv->interface = PIT_SIOB; + } + /* BM-type devices have a bug where bcdDevice gets set + * to 0x200 when iSerialNumber is 0. */ + if (version < 0x500) { + dbg("%s: something fishy - bcdDevice too low for multi-interface device", + __FUNCTION__); + } + } else if (version < 0x200) { + /* Old device. Assume its the original SIO. */ + priv->chip_type = SIO; + priv->baud_base = 12000000 / 16; + priv->write_offset = 1; + } else if (version < 0x400) { + /* Assume its an FT8U232AM (or FT8U245AM) */ + /* (It might be a BM because of the iSerialNumber bug, + * but it will still work as an AM device.) */ + priv->chip_type = FT8U232AM; + } else { + /* Assume its an FT232BM (or FT245BM) */ + priv->chip_type = FT232BM; + } + info("Detected %s", ftdi_chip_name[priv->chip_type]); +} + + /* * *************************************************************************** * Sysfs Attribute @@ -1355,12 +1059,20 @@ static void remove_sysfs_attrs(struct usb_serial *serial) * *************************************************************************** */ -/* Common startup subroutine */ -/* Called from ftdi_SIO_startup, etc. */ -static int ftdi_common_startup (struct usb_serial *serial) +/* Probe function to check for special devices */ +static int ftdi_sio_probe (struct usb_serial *serial, const struct usb_device_id *id) +{ + usb_set_serial_data(serial, (void *)id->driver_info); + + return (0); +} + +/* attach subroutine */ +static int ftdi_sio_attach (struct usb_serial *serial) { struct usb_serial_port *port = serial->port[0]; struct ftdi_private *priv; + struct ftdi_sio_quirk *quirk; dbg("%s",__FUNCTION__); @@ -1400,150 +1112,49 @@ static int ftdi_common_startup (struct usb_serial *serial) port->bulk_out_buffer = NULL; usb_set_serial_port_data(serial->port[0], priv); - - return (0); -} - - -/* Startup for the SIO chip */ -/* Called from usbserial:serial_probe */ -static int ftdi_SIO_startup (struct usb_serial *serial) -{ - struct ftdi_private *priv; - int err; - - dbg("%s",__FUNCTION__); - - err = ftdi_common_startup(serial); - if (err){ - return (err); - } - - priv = usb_get_serial_port_data(serial->port[0]); - priv->chip_type = SIO; - priv->baud_base = 12000000 / 16; - priv->write_offset = 1; - - return (0); -} - -/* Startup for the 8U232AM chip */ -/* Called from usbserial:serial_probe */ -static int ftdi_8U232AM_startup (struct usb_serial *serial) -{ /* ftdi_8U232AM_startup */ - struct ftdi_private *priv; - int err; - - dbg("%s",__FUNCTION__); - err = ftdi_common_startup(serial); - if (err){ - return (err); - } - priv = usb_get_serial_port_data(serial->port[0]); - priv->chip_type = FT8U232AM; - priv->baud_base = 48000000 / 2; /* Would be / 16, but FTDI supports 0.125, 0.25 and 0.5 divisor fractions! */ - + ftdi_determine_type (serial->port[0]); create_sysfs_attrs(serial); - - return (0); -} /* ftdi_8U232AM_startup */ -/* Startup for the FT232BM chip */ -/* Called from usbserial:serial_probe */ -static int ftdi_FT232BM_startup (struct usb_serial *serial) -{ /* ftdi_FT232BM_startup */ - struct ftdi_private *priv; - int err; - - dbg("%s",__FUNCTION__); - err = ftdi_common_startup(serial); - if (err){ - return (err); + /* Check for device requiring special set up. */ + quirk = (struct ftdi_sio_quirk *)usb_get_serial_data(serial); + if (quirk && quirk->setup) { + quirk->setup(serial); } - - priv = usb_get_serial_port_data(serial->port[0]); - priv->chip_type = FT232BM; - priv->baud_base = 48000000 / 2; /* Would be / 16, but FT232BM supports multiple of 0.125 divisor fractions! */ - create_sysfs_attrs(serial); - return (0); -} /* ftdi_FT232BM_startup */ - -/* Startup for the FT2232C chip */ -/* Called from usbserial:serial_probe */ -static int ftdi_FT2232C_startup (struct usb_serial *serial) -{ /* ftdi_FT2232C_startup */ - struct ftdi_private *priv; - int err; - int inter; - - dbg("%s",__FUNCTION__); - err = ftdi_common_startup(serial); - if (err){ - return (err); - } +} /* ftdi_sio_attach */ - priv = usb_get_serial_port_data(serial->port[0]); - priv->chip_type = FT2232C; - inter = serial->interface->altsetting->desc.bInterfaceNumber; - if (inter) { - priv->interface = PIT_SIOB; - } - else { - priv->interface = PIT_SIOA; - } - priv->baud_base = 48000000 / 2; /* Would be / 16, but FT2232C supports multiple of 0.125 divisor fractions! */ - - create_sysfs_attrs(serial); - - return (0); -} /* ftdi_FT2232C_startup */ - -/* Startup for the USB-UIRT device, which requires hardwired baudrate (38400 gets mapped to 312500) */ +/* Setup for the USB-UIRT device, which requires hardwired + * baudrate (38400 gets mapped to 312500) */ /* Called from usbserial:serial_probe */ -static int ftdi_USB_UIRT_startup (struct usb_serial *serial) -{ /* ftdi_USB_UIRT_startup */ +static void ftdi_USB_UIRT_setup (struct usb_serial *serial) +{ struct ftdi_private *priv; - int err; dbg("%s",__FUNCTION__); - err = ftdi_8U232AM_startup(serial); - if (err){ - return (err); - } priv = usb_get_serial_port_data(serial->port[0]); priv->flags |= ASYNC_SPD_CUST; priv->custom_divisor = 77; priv->force_baud = B38400; - - return (0); -} /* ftdi_USB_UIRT_startup */ +} /* ftdi_USB_UIRT_setup */ -/* Startup for the HE-TIRA1 device, which requires hardwired - * baudrate (38400 gets mapped to 100000) */ -static int ftdi_HE_TIRA1_startup (struct usb_serial *serial) -{ /* ftdi_HE_TIRA1_startup */ +/* Setup for the HE-TIRA1 device, which requires hardwired + * baudrate (38400 gets mapped to 100000) and RTS-CTS enabled. */ +static void ftdi_HE_TIRA1_setup (struct usb_serial *serial) +{ struct ftdi_private *priv; - int err; dbg("%s",__FUNCTION__); - err = ftdi_FT232BM_startup(serial); - if (err){ - return (err); - } priv = usb_get_serial_port_data(serial->port[0]); priv->flags |= ASYNC_SPD_CUST; priv->custom_divisor = 240; priv->force_baud = B38400; priv->force_rtscts = 1; - - return (0); -} /* ftdi_HE_TIRA1_startup */ +} /* ftdi_HE_TIRA1_setup */ /* ftdi_shutdown is called from usbserial:usb_serial_disconnect @@ -2367,60 +1978,11 @@ static int ftdi_ioctl (struct usb_serial_port *port, struct file * file, unsigne { struct ftdi_private *priv = usb_get_serial_port_data(port); - int ret, mask; - dbg("%s cmd 0x%04x", __FUNCTION__, cmd); /* Based on code from acm.c and others */ switch (cmd) { - case TIOCMBIS: /* turns on (Sets) the lines as specified by the mask */ - dbg("%s TIOCMBIS", __FUNCTION__); - if (get_user(mask, (unsigned long __user *) arg)) - return -EFAULT; - if (mask & TIOCM_DTR){ - if ((ret = set_dtr(port, HIGH)) < 0) { - err("Urb to set DTR failed"); - return(ret); - } - } - if (mask & TIOCM_RTS) { - if ((ret = set_rts(port, HIGH)) < 0){ - err("Urb to set RTS failed"); - return(ret); - } - } - return(0); - break; - - case TIOCMBIC: /* turns off (Clears) the lines as specified by the mask */ - dbg("%s TIOCMBIC", __FUNCTION__); - if (get_user(mask, (unsigned long __user *) arg)) - return -EFAULT; - if (mask & TIOCM_DTR){ - if ((ret = set_dtr(port, LOW)) < 0){ - err("Urb to unset DTR failed"); - return(ret); - } - } - if (mask & TIOCM_RTS) { - if ((ret = set_rts(port, LOW)) < 0){ - err("Urb to unset RTS failed"); - return(ret); - } - } - return(0); - break; - - /* - * I had originally implemented TCSET{A,S}{,F,W} and - * TCGET{A,S} here separately, however when testing I - * found that the higher layers actually do the termios - * conversions themselves and pass the call onto - * ftdi_sio_set_termios. - * - */ - case TIOCGSERIAL: /* gets serial port data */ return get_serial_info(port, (struct serial_struct __user *) arg); @@ -2516,24 +2078,9 @@ static int __init ftdi_init (void) int retval; dbg("%s", __FUNCTION__); - retval = usb_serial_register(&ftdi_SIO_device); - if (retval) - goto failed_SIO_register; - retval = usb_serial_register(&ftdi_8U232AM_device); - if (retval) - goto failed_8U232AM_register; - retval = usb_serial_register(&ftdi_FT232BM_device); - if (retval) - goto failed_FT232BM_register; - retval = usb_serial_register(&ftdi_FT2232C_device); - if (retval) - goto failed_FT2232C_register; - retval = usb_serial_register(&ftdi_USB_UIRT_device); - if (retval) - goto failed_USB_UIRT_register; - retval = usb_serial_register(&ftdi_HE_TIRA1_device); + retval = usb_serial_register(&ftdi_sio_device); if (retval) - goto failed_HE_TIRA1_register; + goto failed_sio_register; retval = usb_register(&ftdi_driver); if (retval) goto failed_usb_register; @@ -2541,18 +2088,8 @@ static int __init ftdi_init (void) info(DRIVER_VERSION ":" DRIVER_DESC); return 0; failed_usb_register: - usb_serial_deregister(&ftdi_HE_TIRA1_device); -failed_HE_TIRA1_register: - usb_serial_deregister(&ftdi_USB_UIRT_device); -failed_USB_UIRT_register: - usb_serial_deregister(&ftdi_FT2232C_device); -failed_FT2232C_register: - usb_serial_deregister(&ftdi_FT232BM_device); -failed_FT232BM_register: - usb_serial_deregister(&ftdi_8U232AM_device); -failed_8U232AM_register: - usb_serial_deregister(&ftdi_SIO_device); -failed_SIO_register: + usb_serial_deregister(&ftdi_sio_device); +failed_sio_register: return retval; } @@ -2563,12 +2100,7 @@ static void __exit ftdi_exit (void) dbg("%s", __FUNCTION__); usb_deregister (&ftdi_driver); - usb_serial_deregister (&ftdi_HE_TIRA1_device); - usb_serial_deregister (&ftdi_USB_UIRT_device); - usb_serial_deregister (&ftdi_FT2232C_device); - usb_serial_deregister (&ftdi_FT232BM_device); - usb_serial_deregister (&ftdi_8U232AM_device); - usb_serial_deregister (&ftdi_SIO_device); + usb_serial_deregister (&ftdi_sio_device); } diff --git a/drivers/usb/storage/unusual_devs.h b/drivers/usb/storage/unusual_devs.h index 9fcc7bd1fbe..bd0ab3039bd 100644 --- a/drivers/usb/storage/unusual_devs.h +++ b/drivers/usb/storage/unusual_devs.h @@ -697,7 +697,7 @@ UNUSUAL_DEV( 0x07af, 0x0004, 0x0100, 0x0133, UNUSUAL_DEV( 0x07af, 0x0005, 0x0100, 0x0100, "Microtech", "USB-SCSI-HD50", - US_SC_SCSI, US_PR_BULK, usb_stor_euscsi_init, + US_SC_DEVICE, US_PR_DEVICE, usb_stor_euscsi_init, US_FL_SCM_MULT_TARG ), #ifdef CONFIG_USB_STORAGE_DPCM |