diff options
Diffstat (limited to 'drivers')
| -rw-r--r-- | drivers/char/Kconfig | 2 | ||||
| -rw-r--r-- | drivers/media/video/Kconfig | 2 | ||||
| -rw-r--r-- | drivers/mtd/maps/Kconfig | 2 | ||||
| -rw-r--r-- | drivers/net/Kconfig | 4 | ||||
| -rw-r--r-- | drivers/net/phy/Kconfig | 4 | ||||
| -rw-r--r-- | drivers/pci/Kconfig | 2 | ||||
| -rw-r--r-- | drivers/spi/Kconfig | 2 | ||||
| -rw-r--r-- | drivers/usb/host/Kconfig | 2 |
8 files changed, 10 insertions, 10 deletions
diff --git a/drivers/char/Kconfig b/drivers/char/Kconfig index 2af12fc4511..ad8b537ad47 100644 --- a/drivers/char/Kconfig +++ b/drivers/char/Kconfig @@ -994,7 +994,7 @@ config HPET help If you say Y here, you will have a miscdevice named "/dev/hpet/". Each open selects one of the timers supported by the HPET. The timers are - non-periodioc and/or periodic. + non-periodic and/or periodic. config HPET_RTC_IRQ bool "HPET Control RTC IRQ" if !HPET_EMULATE_RTC diff --git a/drivers/media/video/Kconfig b/drivers/media/video/Kconfig index bf267552941..b8fde5cf473 100644 --- a/drivers/media/video/Kconfig +++ b/drivers/media/video/Kconfig @@ -24,7 +24,7 @@ config VIDEO_HELPER_CHIPS_AUTO decode audio/video standards. This option will autoselect all pertinent modules to each selected video module. - Unselect this only if you know exaclty what you are doing, since + Unselect this only if you know exactly what you are doing, since it may break support on some boards. In doubt, say Y. diff --git a/drivers/mtd/maps/Kconfig b/drivers/mtd/maps/Kconfig index 24747bdc3e1..d132ed571f1 100644 --- a/drivers/mtd/maps/Kconfig +++ b/drivers/mtd/maps/Kconfig @@ -607,7 +607,7 @@ config MTD_BAST_MAXSIZE default "4" config MTD_SHARP_SL - bool "ROM maped on Sharp SL Series" + bool "ROM mapped on Sharp SL Series" depends on MTD && ARCH_PXA help This enables access to the flash chip on the Sharp SL Series of PDAs. diff --git a/drivers/net/Kconfig b/drivers/net/Kconfig index 6e863aa9894..b6c70c58ae9 100644 --- a/drivers/net/Kconfig +++ b/drivers/net/Kconfig @@ -32,7 +32,7 @@ config IFB tristate "Intermediate Functional Block support" depends on NET_CLS_ACT ---help--- - This is an intermidiate driver that allows sharing of + This is an intermediate driver that allows sharing of resources. To compile this driver as a module, choose M here: the module will be called ifb. If you want to use more than one ifb @@ -2136,7 +2136,7 @@ config SK98LIN This driver supports the original Yukon chipset. A cleaner driver is also available (skge) which seems to work better than this one. - This driver does not support the newer Yukon2 chipset. A seperate + This driver does not support the newer Yukon2 chipset. A separate driver, sky2, is provided to support Yukon2-based adapters. The following adapters are supported by this driver: diff --git a/drivers/net/phy/Kconfig b/drivers/net/phy/Kconfig index b79ec0d7480..ecb61f876f2 100644 --- a/drivers/net/phy/Kconfig +++ b/drivers/net/phy/Kconfig @@ -61,8 +61,8 @@ config FIXED_PHY depends on PHYLIB ---help--- Adds the driver to PHY layer to cover the boards that do not have any PHY bound, - but with the ability to manipulate with speed/link in software. The relavant MII - speed/duplex parameters could be effectively handled in user-specified fuction. + but with the ability to manipulate the speed/link in software. The relevant MII + speed/duplex parameters could be effectively handled in a user-specified function. Currently tested with mpc866ads. config FIXED_MII_10_FDX diff --git a/drivers/pci/Kconfig b/drivers/pci/Kconfig index 5f1b9f58070..d0ba112355c 100644 --- a/drivers/pci/Kconfig +++ b/drivers/pci/Kconfig @@ -27,7 +27,7 @@ config PCI_MULTITHREAD_PROBE smaller speedup on single processor machines. But it can also cause lots of bad things to happen. A number - of PCI drivers can not properly handle running in this way, + of PCI drivers cannot properly handle running in this way, some will just not work properly at all, while others might decide to blow up power supplies with a huge load all at once, so use this option at your own risk. diff --git a/drivers/spi/Kconfig b/drivers/spi/Kconfig index 23334c8bc4c..d895a1adb42 100644 --- a/drivers/spi/Kconfig +++ b/drivers/spi/Kconfig @@ -16,7 +16,7 @@ config SPI controller and a chipselect. Most SPI slaves don't support dynamic device discovery; some are even write-only or read-only. - SPI is widely used by microcontollers to talk with sensors, + SPI is widely used by microcontrollers to talk with sensors, eeprom and flash memory, codecs and various other controller chips, analog to digital (and d-to-a) converters, and more. MMC and SD cards can be accessed using SPI protocol; and for diff --git a/drivers/usb/host/Kconfig b/drivers/usb/host/Kconfig index cf10cbc98f8..cc60759083b 100644 --- a/drivers/usb/host/Kconfig +++ b/drivers/usb/host/Kconfig @@ -153,7 +153,7 @@ config USB_U132_HCD adapter will *NOT* work with PC cards that do not contain an OHCI controller. - For those PC cards that contain multiple OHCI controllers only ther + For those PC cards that contain multiple OHCI controllers only the first one is used. The driver consists of two modules, the "ftdi-elan" module is a |