diff options
Diffstat (limited to 'drivers')
| -rw-r--r-- | drivers/ide/Kconfig | 38 | ||||
| -rw-r--r-- | drivers/ide/Makefile | 8 |
2 files changed, 6 insertions, 40 deletions
diff --git a/drivers/ide/Kconfig b/drivers/ide/Kconfig index b50b5dac95b..6c6dd2faced 100644 --- a/drivers/ide/Kconfig +++ b/drivers/ide/Kconfig @@ -54,38 +54,6 @@ menuconfig IDE if IDE -config BLK_DEV_IDE - tristate "Enhanced IDE/MFM/RLL disk/cdrom/tape/floppy support" - ---help--- - If you say Y here, you will use the full-featured IDE driver to - control up to ten ATA/IDE interfaces, each being able to serve a - "master" and a "slave" device, for a total of up to twenty ATA/IDE - disk/cdrom/tape/floppy drives. - - Useful information about large (>540 MB) IDE disks, multiple - interfaces, what to do if ATA/IDE devices are not automatically - detected, sound card ATA/IDE ports, module support, and other - topics, is contained in <file:Documentation/ide/ide.txt>. For detailed - information about hard drives, consult the Disk-HOWTO and the - Multi-Disk-HOWTO, available from - <http://www.tldp.org/docs.html#howto>. - - To fine-tune ATA/IDE drive/interface parameters for improved - performance, look for the hdparm package at - <ftp://ibiblio.org/pub/Linux/system/hardware/>. - - To compile this driver as a module, choose M here and read - <file:Documentation/ide/ide.txt>. The module will be called ide-mod. - Do not compile this driver as a module if your root file system (the - one containing the directory /) is located on an IDE device. - - If you have one or more IDE drives, say Y or M here. If your system - has no IDE drives, or if memory requirements are really tight, you - could say N here, and select the "Old hard disk driver" below - instead to save about 13 KB of memory in the kernel. - -if BLK_DEV_IDE - comment "Please see Documentation/ide/ide.txt for help/info on IDE drives" config IDE_TIMINGS @@ -348,7 +316,7 @@ config BLK_DEV_IDEPCI config IDEPCI_PCIBUS_ORDER bool "Probe IDE PCI devices in the PCI bus order (DEPRECATED)" - depends on BLK_DEV_IDE=y && BLK_DEV_IDEPCI + depends on IDE=y && BLK_DEV_IDEPCI default y help Probe IDE PCI devices in the order in which they appear on the @@ -729,7 +697,7 @@ endif config BLK_DEV_IDE_PMAC tristate "PowerMac on-board IDE support" - depends on PPC_PMAC && IDE=y && BLK_DEV_IDE=y + depends on PPC_PMAC && IDE=y select IDE_TIMINGS help This driver provides support for the on-board IDE controller on @@ -963,6 +931,4 @@ config BLK_DEV_IDEDMA def_bool BLK_DEV_IDEDMA_SFF || BLK_DEV_IDEDMA_PMAC || \ BLK_DEV_IDEDMA_ICS || BLK_DEV_IDE_AU1XXX_MDMA2_DBDMA -endif - endif # IDE diff --git a/drivers/ide/Makefile b/drivers/ide/Makefile index 308b8a12f31..f408983f89f 100644 --- a/drivers/ide/Makefile +++ b/drivers/ide/Makefile @@ -15,14 +15,14 @@ ide-core-$(CONFIG_BLK_DEV_IDEDMA) += ide-dma.o ide-core-$(CONFIG_IDE_PROC_FS) += ide-proc.o ide-core-$(CONFIG_BLK_DEV_IDEACPI) += ide-acpi.o -obj-$(CONFIG_BLK_DEV_IDE) += ide-core.o +obj-$(CONFIG_IDE) += ide-core.o ifeq ($(CONFIG_IDE_ARM), y) ide-arm-core-y += arm/ide_arm.o obj-y += ide-arm-core.o endif -obj-$(CONFIG_BLK_DEV_IDE) += legacy/ pci/ +obj-$(CONFIG_IDE) += legacy/ pci/ obj-$(CONFIG_IDEPCI_PCIBUS_ORDER) += ide-scan-pci.o @@ -31,7 +31,7 @@ ifeq ($(CONFIG_BLK_DEV_CMD640), y) obj-y += cmd640-core.o endif -obj-$(CONFIG_BLK_DEV_IDE) += ppc/ +obj-$(CONFIG_IDE) += ppc/ obj-$(CONFIG_IDE_H8300) += h8300/ obj-$(CONFIG_IDE_GENERIC) += ide-generic.o obj-$(CONFIG_BLK_DEV_IDEPNP) += ide-pnp.o @@ -54,4 +54,4 @@ ifeq ($(CONFIG_BLK_DEV_PLATFORM), y) obj-y += ide-platform-core.o endif -obj-$(CONFIG_BLK_DEV_IDE) += arm/ mips/ +obj-$(CONFIG_IDE) += arm/ mips/ |