diff options
Diffstat (limited to 'drivers')
| -rw-r--r-- | drivers/ata/ahci.c | 11 | ||||
| -rw-r--r-- | drivers/ata/libata-core.c | 67 | ||||
| -rw-r--r-- | drivers/ata/pata_scc.c | 13 | ||||
| -rw-r--r-- | drivers/ata/sata_inic162x.c | 2 |
4 files changed, 59 insertions, 34 deletions
diff --git a/drivers/ata/ahci.c b/drivers/ata/ahci.c index 49cf4cf1a5a..93bcb2cb3d3 100644 --- a/drivers/ata/ahci.c +++ b/drivers/ata/ahci.c @@ -1153,15 +1153,8 @@ static int ahci_do_softreset(struct ata_link *link, unsigned int *class, tf.ctl &= ~ATA_SRST; ahci_exec_polled_cmd(ap, pmp, &tf, 0, 0, 0); - /* spec mandates ">= 2ms" before checking status. - * We wait 150ms, because that was the magic delay used for - * ATAPI devices in Hale Landis's ATADRVR, for the period of time - * between when the ATA command register is written, and then - * status is checked. Because waiting for "a while" before - * checking status is fine, post SRST, we perform this magic - * delay here as well. - */ - msleep(150); + /* wait a while before checking status */ + ata_wait_after_reset(ap, deadline); rc = ata_wait_ready(ap, deadline); /* link occupied, -ENODEV too is an error */ diff --git a/drivers/ata/libata-core.c b/drivers/ata/libata-core.c index 50ae20101d1..8ee56e5cfb0 100644 --- a/drivers/ata/libata-core.c +++ b/drivers/ata/libata-core.c @@ -3118,6 +3118,55 @@ int ata_busy_sleep(struct ata_port *ap, } /** + * ata_wait_after_reset - wait before checking status after reset + * @ap: port containing status register to be polled + * @deadline: deadline jiffies for the operation + * + * After reset, we need to pause a while before reading status. + * Also, certain combination of controller and device report 0xff + * for some duration (e.g. until SATA PHY is up and running) + * which is interpreted as empty port in ATA world. This + * function also waits for such devices to get out of 0xff + * status. + * + * LOCKING: + * Kernel thread context (may sleep). + */ +void ata_wait_after_reset(struct ata_port *ap, unsigned long deadline) +{ + unsigned long until = jiffies + ATA_TMOUT_FF_WAIT; + + if (time_before(until, deadline)) + deadline = until; + + /* Spec mandates ">= 2ms" before checking status. We wait + * 150ms, because that was the magic delay used for ATAPI + * devices in Hale Landis's ATADRVR, for the period of time + * between when the ATA command register is written, and then + * status is checked. Because waiting for "a while" before + * checking status is fine, post SRST, we perform this magic + * delay here as well. + * + * Old drivers/ide uses the 2mS rule and then waits for ready. + */ + msleep(150); + + /* Wait for 0xff to clear. Some SATA devices take a long time + * to clear 0xff after reset. For example, HHD424020F7SV00 + * iVDR needs >= 800ms while. Quantum GoVault needs even more + * than that. + */ + while (1) { + u8 status = ata_chk_status(ap); + + if (status != 0xff || time_after(jiffies, deadline)) + return; + + msleep(50); + } +} + +/** * ata_wait_ready - sleep until BSY clears, or timeout * @ap: port containing status register to be polled * @deadline: deadline jiffies for the operation @@ -3254,17 +3303,8 @@ static int ata_bus_softreset(struct ata_port *ap, unsigned int devmask, ap->ops->set_piomode(ap, dev); } - /* spec mandates ">= 2ms" before checking status. - * We wait 150ms, because that was the magic delay used for - * ATAPI devices in Hale Landis's ATADRVR, for the period of time - * between when the ATA command register is written, and then - * status is checked. Because waiting for "a while" before - * checking status is fine, post SRST, we perform this magic - * delay here as well. - * - * Old drivers/ide uses the 2mS rule and then waits for ready - */ - msleep(150); + /* wait a while before checking status */ + ata_wait_after_reset(ap, deadline); /* Before we perform post reset processing we want to see if * the bus shows 0xFF because the odd clown forgets the D7 @@ -3691,8 +3731,8 @@ int sata_std_hardreset(struct ata_link *link, unsigned int *class, return 0; } - /* wait a while before checking status, see SRST for more info */ - msleep(150); + /* wait a while before checking status */ + ata_wait_after_reset(ap, deadline); /* If PMP is supported, we have to do follow-up SRST. Note * that some PMPs don't send D2H Reg FIS after hardreset at @@ -7358,6 +7398,7 @@ EXPORT_SYMBOL_GPL(ata_port_disable); EXPORT_SYMBOL_GPL(ata_ratelimit); EXPORT_SYMBOL_GPL(ata_wait_register); EXPORT_SYMBOL_GPL(ata_busy_sleep); +EXPORT_SYMBOL_GPL(ata_wait_after_reset); EXPORT_SYMBOL_GPL(ata_wait_ready); EXPORT_SYMBOL_GPL(ata_port_queue_task); EXPORT_SYMBOL_GPL(ata_scsi_ioctl); diff --git a/drivers/ata/pata_scc.c b/drivers/ata/pata_scc.c index 55576138fae..ea2ef9fc15b 100644 --- a/drivers/ata/pata_scc.c +++ b/drivers/ata/pata_scc.c @@ -570,17 +570,8 @@ static unsigned int scc_bus_softreset(struct ata_port *ap, unsigned int devmask, udelay(20); out_be32(ioaddr->ctl_addr, ap->ctl); - /* spec mandates ">= 2ms" before checking status. - * We wait 150ms, because that was the magic delay used for - * ATAPI devices in Hale Landis's ATADRVR, for the period of time - * between when the ATA command register is written, and then - * status is checked. Because waiting for "a while" before - * checking status is fine, post SRST, we perform this magic - * delay here as well. - * - * Old drivers/ide uses the 2mS rule and then waits for ready - */ - msleep(150); + /* wait a while before checking status */ + ata_wait_after_reset(ap, deadline); /* Before we perform post reset processing we want to see if * the bus shows 0xFF because the odd clown forgets the D7 diff --git a/drivers/ata/sata_inic162x.c b/drivers/ata/sata_inic162x.c index 08595f34b3e..b97d077e61b 100644 --- a/drivers/ata/sata_inic162x.c +++ b/drivers/ata/sata_inic162x.c @@ -448,7 +448,7 @@ static int inic_hardreset(struct ata_link *link, unsigned int *class, struct ata_taskfile tf; /* wait a while before checking status */ - msleep(150); + ata_wait_after_reset(ap, deadline); rc = ata_wait_ready(ap, deadline); /* link occupied, -ENODEV too is an error */ |