diff options
Diffstat (limited to 'drivers')
| -rw-r--r-- | drivers/net/wimax/i2400m/driver.c | 12 | ||||
| -rw-r--r-- | drivers/net/wimax/i2400m/fw.c | 313 | ||||
| -rw-r--r-- | drivers/net/wimax/i2400m/i2400m.h | 36 | ||||
| -rw-r--r-- | drivers/net/wimax/i2400m/rx.c | 22 | ||||
| -rw-r--r-- | drivers/net/wimax/i2400m/sdio-rx.c | 25 | ||||
| -rw-r--r-- | drivers/net/wimax/i2400m/usb-notif.c | 32 |
6 files changed, 355 insertions, 85 deletions
diff --git a/drivers/net/wimax/i2400m/driver.c b/drivers/net/wimax/i2400m/driver.c index e3b2c246cad..73f45ea010a 100644 --- a/drivers/net/wimax/i2400m/driver.c +++ b/drivers/net/wimax/i2400m/driver.c @@ -98,6 +98,15 @@ MODULE_PARM_DESC(debug, "are the different debug submodules and VALUE are the " "initial debug value to set."); +static char i2400m_barkers_params[128]; +module_param_string(barkers, i2400m_barkers_params, + sizeof(i2400m_barkers_params), 0644); +MODULE_PARM_DESC(barkers, + "String of comma-separated 32-bit values; each is " + "recognized as the value the device sends as a reboot " + "signal; values are appended to a list--setting one value " + "as zero cleans the existing list and starts a new one."); + /** * i2400m_queue_work - schedule work on a i2400m's queue * @@ -804,7 +813,7 @@ int __init i2400m_driver_init(void) { d_parse_params(D_LEVEL, D_LEVEL_SIZE, i2400m_debug_params, "i2400m.debug"); - return 0; + return i2400m_barker_db_init(i2400m_barkers_params); } module_init(i2400m_driver_init); @@ -813,6 +822,7 @@ void __exit i2400m_driver_exit(void) { /* for scheds i2400m_dev_reset_handle() */ flush_scheduled_work(); + i2400m_barker_db_exit(); return; } module_exit(i2400m_driver_exit); diff --git a/drivers/net/wimax/i2400m/fw.c b/drivers/net/wimax/i2400m/fw.c index c962a8d8df7..798564eb0e9 100644 --- a/drivers/net/wimax/i2400m/fw.c +++ b/drivers/net/wimax/i2400m/fw.c @@ -40,11 +40,9 @@ * * THE PROCEDURE * - * (this is decribed for USB, but for SDIO is similar) - * - * The 2400m works in two modes: boot-mode or normal mode. In boot - * mode we can execute only a handful of commands targeted at - * uploading the firmware and launching it. + * The 2400m and derived devices work in two modes: boot-mode or + * normal mode. In boot mode we can execute only a handful of commands + * targeted at uploading the firmware and launching it. * * The 2400m enters boot mode when it is first connected to the * system, when it crashes and when you ask it to reboot. There are @@ -52,18 +50,26 @@ * firmwares signed with a certain private key, non-signed takes any * firmware. Normal hardware takes only signed firmware. * - * Upon entrance to boot mode, the device sends a few zero length - * packets (ZLPs) on the notification endpoint, then a reboot barker - * (4 le32 words with value I2400M_{S,N}BOOT_BARKER). We ack it by - * sending the same barker on the bulk out endpoint. The device acks - * with a reboot ack barker (4 le32 words with value 0xfeedbabe) and - * then the device is fully rebooted. At this point we can upload the - * firmware. + * On boot mode, in USB, we write to the device using the bulk out + * endpoint and read from it in the notification endpoint. In SDIO we + * talk to it via the write address and read from the read address. + * + * Upon entrance to boot mode, the device sends (preceeded with a few + * zero length packets (ZLPs) on the notification endpoint in USB) a + * reboot barker (4 le32 words with the same value). We ack it by + * sending the same barker to the device. The device acks with a + * reboot ack barker (4 le32 words with value I2400M_ACK_BARKER) and + * then is fully booted. At this point we can upload the firmware. + * + * Note that different iterations of the device and EEPROM + * configurations will send different [re]boot barkers; these are + * collected in i2400m_barker_db along with the firmware + * characteristics they require. * * This process is accomplished by the i2400m_bootrom_init() * function. All the device interaction happens through the * i2400m_bm_cmd() [boot mode command]. Special return values will - * indicate if the device resets. + * indicate if the device did reset during the process. * * After this, we read the MAC address and then (if needed) * reinitialize the device. We need to read it ahead of time because @@ -101,6 +107,11 @@ * * ROADMAP * + * i2400m_barker_db_init Called by i2400m_driver_init() + * i2400m_barker_db_add + * + * i2400m_barker_db_exit Called by i2400m_driver_exit() + * * i2400m_dev_bootstrap Called by __i2400m_dev_start() * request_firmware * i2400m_fw_check @@ -125,6 +136,7 @@ * i2400m->bus_bm_cmd_send() * i2400m->bus_bm_wait_for_ack * __i2400m_bm_ack_verify + * i2400m_is_boot_barker * * i2400m_bm_cmd_prepare Used by bus-drivers to prep * commands before sending @@ -175,6 +187,237 @@ EXPORT_SYMBOL_GPL(i2400m_bm_cmd_prepare); /* + * Database of known barkers. + * + * A barker is what the device sends indicating he is ready to be + * bootloaded. Different versions of the device will send different + * barkers. Depending on the barker, it might mean the device wants + * some kind of firmware or the other. + */ +static struct i2400m_barker_db { + __le32 data[4]; +} *i2400m_barker_db; +static size_t i2400m_barker_db_used, i2400m_barker_db_size; + + +static +int i2400m_zrealloc_2x(void **ptr, size_t *_count, size_t el_size, + gfp_t gfp_flags) +{ + size_t old_count = *_count, + new_count = old_count ? 2 * old_count : 2, + old_size = el_size * old_count, + new_size = el_size * new_count; + void *nptr = krealloc(*ptr, new_size, gfp_flags); + if (nptr) { + /* zero the other half or the whole thing if old_count + * was zero */ + if (old_size == 0) + memset(nptr, 0, new_size); + else + memset(nptr + old_size, 0, old_size); + *_count = new_count; + *ptr = nptr; + return 0; + } else + return -ENOMEM; +} + + +/* + * Add a barker to the database + * + * This cannot used outside of this module and only at at module_init + * time. This is to avoid the need to do locking. + */ +static +int i2400m_barker_db_add(u32 barker_id) +{ + int result; + + struct i2400m_barker_db *barker; + if (i2400m_barker_db_used >= i2400m_barker_db_size) { + result = i2400m_zrealloc_2x( + (void **) &i2400m_barker_db, &i2400m_barker_db_size, + sizeof(i2400m_barker_db[0]), GFP_KERNEL); + if (result < 0) + return result; + } + barker = i2400m_barker_db + i2400m_barker_db_used++; + barker->data[0] = le32_to_cpu(barker_id); + barker->data[1] = le32_to_cpu(barker_id); + barker->data[2] = le32_to_cpu(barker_id); + barker->data[3] = le32_to_cpu(barker_id); + return 0; +} + + +void i2400m_barker_db_exit(void) +{ + kfree(i2400m_barker_db); + i2400m_barker_db = NULL; + i2400m_barker_db_size = 0; + i2400m_barker_db_used = 0; +} + + +/* + * Helper function to add all the known stable barkers to the barker + * database. + */ +static +int i2400m_barker_db_known_barkers(void) +{ + int result; + + result = i2400m_barker_db_add(I2400M_NBOOT_BARKER); + if (result < 0) + goto error_add; + result = i2400m_barker_db_add(I2400M_SBOOT_BARKER); + if (result < 0) + goto error_add; +error_add: + return result; +} + + +/* + * Initialize the barker database + * + * This can only be used from the module_init function for this + * module; this is to avoid the need to do locking. + * + * @options: command line argument with extra barkers to + * recognize. This is a comma-separated list of 32-bit hex + * numbers. They are appended to the existing list. Setting 0 + * cleans the existing list and starts a new one. + */ +int i2400m_barker_db_init(const char *_options) +{ + int result; + char *options = NULL, *options_orig, *token; + + i2400m_barker_db = NULL; + i2400m_barker_db_size = 0; + i2400m_barker_db_used = 0; + + result = i2400m_barker_db_known_barkers(); + if (result < 0) + goto error_add; + /* parse command line options from i2400m.barkers */ + if (_options != NULL) { + unsigned barker; + + options_orig = kstrdup(_options, GFP_KERNEL); + if (options_orig == NULL) + goto error_parse; + options = options_orig; + + while ((token = strsep(&options, ",")) != NULL) { + if (*token == '\0') /* eat joint commas */ + continue; + if (sscanf(token, "%x", &barker) != 1 + || barker > 0xffffffff) { + printk(KERN_ERR "%s: can't recognize " + "i2400m.barkers value '%s' as " + "a 32-bit number\n", + __func__, token); + result = -EINVAL; + goto error_parse; + } + if (barker == 0) { + /* clean list and start new */ + i2400m_barker_db_exit(); + continue; + } + result = i2400m_barker_db_add(barker); + if (result < 0) + goto error_add; + } + kfree(options_orig); + } + return 0; + +error_parse: +error_add: + kfree(i2400m_barker_db); + return result; +} + + +/* + * Recognize a boot barker + * + * @buf: buffer where the boot barker. + * @buf_size: size of the buffer (has to be 16 bytes). It is passed + * here so the function can check it for the caller. + * + * Note that as a side effect, upon identifying the obtained boot + * barker, this function will set i2400m->barker to point to the right + * barker database entry. Subsequent calls to the function will result + * in verifying that the same type of boot barker is returned when the + * device [re]boots (as long as the same device instance is used). + * + * Return: 0 if @buf matches a known boot barker. -ENOENT if the + * buffer in @buf doesn't match any boot barker in the database or + * -EILSEQ if the buffer doesn't have the right size. + */ +int i2400m_is_boot_barker(struct i2400m *i2400m, + const void *buf, size_t buf_size) +{ + int result; + struct device *dev = i2400m_dev(i2400m); + struct i2400m_barker_db *barker; + int i; + + result = -ENOENT; + if (buf_size != sizeof(i2400m_barker_db[i].data)) + return result; + + /* Short circuit if we have already discovered the barker + * associated with the device. */ + if (i2400m->barker + && !memcmp(buf, i2400m->barker, sizeof(i2400m->barker->data))) { + unsigned index = (i2400m->barker - i2400m_barker_db) + / sizeof(*i2400m->barker); + d_printf(2, dev, "boot barker cache-confirmed #%u/%08x\n", + index, le32_to_cpu(i2400m->barker->data[0])); + return 0; + } + + for (i = 0; i < i2400m_barker_db_used; i++) { + barker = &i2400m_barker_db[i]; + BUILD_BUG_ON(sizeof(barker->data) != 16); + if (memcmp(buf, barker->data, sizeof(barker->data))) + continue; + + if (i2400m->barker == NULL) { + i2400m->barker = barker; + d_printf(1, dev, "boot barker set to #%u/%08x\n", + i, le32_to_cpu(barker->data[0])); + if (barker->data[0] == le32_to_cpu(I2400M_NBOOT_BARKER)) + i2400m->sboot = 0; + else + i2400m->sboot = 1; + } else if (i2400m->barker != barker) { + dev_err(dev, "HW inconsistency: device " + "reports a different boot barker " + "than set (from %08x to %08x)\n", + le32_to_cpu(i2400m->barker->data[0]), + le32_to_cpu(barker->data[0])); + result = -EIO; + } else + d_printf(2, dev, "boot barker confirmed #%u/%08x\n", + i, le32_to_cpu(barker->data[0])); + result = 0; + break; + } + return result; +} +EXPORT_SYMBOL_GPL(i2400m_is_boot_barker); + + +/* * Verify the ack data received * * Given a reply to a boot mode command, chew it and verify everything @@ -204,20 +447,10 @@ ssize_t __i2400m_bm_ack_verify(struct i2400m *i2400m, int opcode, opcode, ack_size, sizeof(*ack)); goto error_ack_short; } - if (ack_size == sizeof(i2400m_NBOOT_BARKER) - && memcmp(ack, i2400m_NBOOT_BARKER, sizeof(*ack)) == 0) { - result = -ERESTARTSYS; - i2400m->sboot = 0; - d_printf(6, dev, "boot-mode cmd %d: " - "HW non-signed boot barker\n", opcode); - goto error_reboot; - } - if (ack_size == sizeof(i2400m_SBOOT_BARKER) - && memcmp(ack, i2400m_SBOOT_BARKER, sizeof(*ack)) == 0) { + result = i2400m_is_boot_barker(i2400m, ack, ack_size); + if (result >= 0) { result = -ERESTARTSYS; - i2400m->sboot = 1; - d_printf(6, dev, "boot-mode cmd %d: HW signed reboot barker\n", - opcode); + d_printf(6, dev, "boot-mode cmd %d: HW boot barker\n", opcode); goto error_reboot; } if (ack_size == sizeof(i2400m_ACK_BARKER) @@ -590,9 +823,6 @@ int i2400m_dnload_finalize(struct i2400m *i2400m, * * < 0 errno code on error, 0 if ok. * - * i2400m->sboot set to 0 for unsecure boot process, 1 for secure - * boot process. - * * Description: * * Tries hard enough to put the device in boot-mode. There are two @@ -619,7 +849,7 @@ int i2400m_bootrom_init(struct i2400m *i2400m, enum i2400m_bri flags) int count = i2400m->bus_bm_retries; int ack_timeout_cnt = 1; - BUILD_BUG_ON(sizeof(*cmd) != sizeof(i2400m_NBOOT_BARKER)); + BUILD_BUG_ON(sizeof(*cmd) != sizeof(i2400m_barker_db[0].data)); BUILD_BUG_ON(sizeof(ack) != sizeof(i2400m_ACK_BARKER)); d_fnstart(4, dev, "(i2400m %p flags 0x%08x)\n", i2400m, flags); @@ -647,8 +877,14 @@ do_reboot: case -ETIMEDOUT: /* device has timed out, we might be in boot * mode already and expecting an ack, let's try * that */ - dev_info(dev, "warm reset timed out, trying an ack\n"); - goto do_reboot_ack; + if (i2400m->barker == NULL) { + dev_info(dev, "warm reset timed out, unknown barker " + "type, rebooting\n"); + goto do_reboot; + } else { + dev_info(dev, "warm reset timed out, trying an ack\n"); + goto do_reboot_ack; + } case -EPROTO: case -ESHUTDOWN: /* dev is gone */ case -EINTR: /* user cancelled */ @@ -664,12 +900,7 @@ do_reboot: * notification and report it as -EISCONN. */ do_reboot_ack: d_printf(4, dev, "device reboot ack: sending ack [%d # left]\n", count); - if (i2400m->sboot == 0) - memcpy(cmd, i2400m_NBOOT_BARKER, - sizeof(i2400m_NBOOT_BARKER)); - else - memcpy(cmd, i2400m_SBOOT_BARKER, - sizeof(i2400m_SBOOT_BARKER)); + memcpy(cmd, i2400m->barker->data, sizeof(i2400m->barker->data)); result = i2400m_bm_cmd(i2400m, cmd, sizeof(*cmd), &ack, sizeof(ack), I2400M_BM_CMD_RAW); switch (result) { @@ -682,10 +913,8 @@ do_reboot_ack: d_printf(4, dev, "reboot ack: got ack barker - good\n"); break; case -ETIMEDOUT: /* no response, maybe it is the other type? */ - if (ack_timeout_cnt-- >= 0) { - d_printf(4, dev, "reboot ack timedout: " - "trying the other type?\n"); - i2400m->sboot = !i2400m->sboot; + if (ack_timeout_cnt-- < 0) { + d_printf(4, dev, "reboot ack timedout: retrying\n"); goto do_reboot_ack; } else { dev_err(dev, "reboot ack timedout too long: " diff --git a/drivers/net/wimax/i2400m/i2400m.h b/drivers/net/wimax/i2400m/i2400m.h index 73b4e6a1513..bcb1882ed74 100644 --- a/drivers/net/wimax/i2400m/i2400m.h +++ b/drivers/net/wimax/i2400m/i2400m.h @@ -194,6 +194,7 @@ enum i2400m_reset_type { struct i2400m_reset_ctx; struct i2400m_roq; +struct i2400m_barker_db; /** * struct i2400m - descriptor for an Intel 2400m @@ -419,6 +420,12 @@ struct i2400m_roq; * * @fw_version: version of the firmware interface, Major.minor, * encoded in the high word and low word (major << 16 | minor). + * + * @barker: barker type that the device uses; this is initialized by + * i2400m_is_boot_barker() the first time it is called. Then it + * won't change during the life cycle of the device and everytime + * a boot barker is received, it is just verified for it being the + * same. */ struct i2400m { struct wimax_dev wimax_dev; /* FIRST! See doc */ @@ -484,6 +491,7 @@ struct i2400m { struct dentry *debugfs_dentry; const char *fw_name; /* name of the current firmware image */ unsigned long fw_version; /* version of the firmware interface */ + struct i2400m_barker_db *barker; }; @@ -574,6 +582,14 @@ extern void i2400m_bm_cmd_prepare(struct i2400m_bootrom_header *); extern int i2400m_dev_bootstrap(struct i2400m *, enum i2400m_bri); extern int i2400m_read_mac_addr(struct i2400m *); extern int i2400m_bootrom_init(struct i2400m *, enum i2400m_bri); +extern int i2400m_is_boot_barker(struct i2400m *, const void *, size_t); +static inline +int i2400m_is_d2h_barker(const void *buf) +{ + const __le32 *barker = buf; + return le32_to_cpu(*barker) == I2400M_D2H_MSG_BARKER; +} +extern void i2400m_unknown_barker(struct i2400m *, const void *, size_t); /* Make/grok boot-rom header commands */ @@ -736,20 +752,6 @@ extern int i2400m_rx(struct i2400m *, struct sk_buff *); extern struct i2400m_msg_hdr *i2400m_tx_msg_get(struct i2400m *, size_t *); extern void i2400m_tx_msg_sent(struct i2400m *); -static const __le32 i2400m_NBOOT_BARKER[4] = { - cpu_to_le32(I2400M_NBOOT_BARKER), - cpu_to_le32(I2400M_NBOOT_BARKER), - cpu_to_le32(I2400M_NBOOT_BARKER), - cpu_to_le32(I2400M_NBOOT_BARKER) -}; - -static const __le32 i2400m_SBOOT_BARKER[4] = { - cpu_to_le32(I2400M_SBOOT_BARKER), - cpu_to_le32(I2400M_SBOOT_BARKER), - cpu_to_le32(I2400M_SBOOT_BARKER), - cpu_to_le32(I2400M_SBOOT_BARKER) -}; - extern int i2400m_power_save_disabled; /* @@ -848,6 +850,12 @@ void __i2400m_msleep(unsigned ms) #endif } + +/* module initialization helpers */ +extern int i2400m_barker_db_init(const char *); +extern void i2400m_barker_db_exit(void); + + /* Module parameters */ extern int i2400m_idle_mode_disabled; diff --git a/drivers/net/wimax/i2400m/rx.c b/drivers/net/wimax/i2400m/rx.c index 07c32e68909..bcd411f1a85 100644 --- a/drivers/net/wimax/i2400m/rx.c +++ b/drivers/net/wimax/i2400m/rx.c @@ -1194,6 +1194,28 @@ error_msg_hdr_check: EXPORT_SYMBOL_GPL(i2400m_rx); +void i2400m_unknown_barker(struct i2400m *i2400m, + const void *buf, size_t size) +{ + struct device *dev = i2400m_dev(i2400m); + char prefix[64]; + const __le32 *barker = buf; + dev_err(dev, "RX: HW BUG? unknown barker %08x, " + "dropping %zu bytes\n", le32_to_cpu(*barker), size); + snprintf(prefix, sizeof(prefix), "%s %s: ", + dev_driver_string(dev), dev_name(dev)); + if (size > 64) { + print_hex_dump(KERN_ERR, prefix, DUMP_PREFIX_OFFSET, + 8, 4, buf, 64, 0); + printk(KERN_ERR "%s... (only first 64 bytes " + "dumped)\n", prefix); + } else + print_hex_dump(KERN_ERR, prefix, DUMP_PREFIX_OFFSET, + 8, 4, buf, size, 0); +} +EXPORT_SYMBOL(i2400m_unknown_barker); + + /* * Initialize the RX queue and infrastructure * diff --git a/drivers/net/wimax/i2400m/sdio-rx.c b/drivers/net/wimax/i2400m/sdio-rx.c index 1c9046914bd..87263be4eed 100644 --- a/drivers/net/wimax/i2400m/sdio-rx.c +++ b/drivers/net/wimax/i2400m/sdio-rx.c @@ -53,6 +53,7 @@ * i2400ms_irq() * i2400ms_rx() * __i2400ms_rx_get_size() + * i2400m_is_boot_barker() * i2400m_rx() * * i2400ms_rx_setup() @@ -158,7 +159,7 @@ void i2400ms_rx(struct i2400ms *i2400ms) } rmb(); /* make sure we get boot_mode from dev_reset_handle */ - if (i2400m->boot_mode == 1) { + if (unlikely(i2400m->boot_mode == 1)) { spin_lock(&i2400m->rx_lock); i2400ms->bm_ack_size = rx_size; spin_unlock(&i2400m->rx_lock); @@ -166,17 +167,26 @@ void i2400ms_rx(struct i2400ms *i2400ms) wake_up(&i2400ms->bm_wfa_wq); dev_err(dev, "RX: SDIO boot mode message\n"); kfree_skb(skb); - } else if (unlikely(!memcmp(skb->data, i2400m_NBOOT_BARKER, - sizeof(i2400m_NBOOT_BARKER)) - || !memcmp(skb->data, i2400m_SBOOT_BARKER, - sizeof(i2400m_SBOOT_BARKER)))) { + goto out; + } + ret = -EIO; + if (unlikely(rx_size < sizeof(__le32))) { + dev_err(dev, "HW BUG? only %zu bytes received\n", rx_size); + goto error_bad_size; + } + if (likely(i2400m_is_d2h_barker(skb->data))) { + skb_put(skb, rx_size); + i2400m_rx(i2400m, skb); + } else if (unlikely(i2400m_is_boot_barker(i2400m, + skb->data, rx_size))) { ret = i2400m_dev_reset_handle(i2400m); dev_err(dev, "RX: SDIO reboot barker\n"); kfree_skb(skb); } else { - skb_put(skb, rx_size); - i2400m_rx(i2400m, skb); + i2400m_unknown_barker(i2400m, skb->data, rx_size); + kfree_skb(skb); } +out: d_fnend(7, dev, "(i2400ms %p) = void\n", i2400ms); return; @@ -184,6 +194,7 @@ error_memcpy_fromio: kfree_skb(skb); error_alloc_skb: error_get_size: +error_bad_size: d_fnend(7, dev, "(i2400ms %p) = %d\n", i2400ms, ret); return; } diff --git a/drivers/net/wimax/i2400m/usb-notif.c b/drivers/net/wimax/i2400m/usb-notif.c index 3e11e35cd69..a0751a347cd 100644 --- a/drivers/net/wimax/i2400m/usb-notif.c +++ b/drivers/net/wimax/i2400m/usb-notif.c @@ -51,6 +51,7 @@ * * i2400mu_usb_notification_cb() Called when a URB is ready * i2400mu_notif_grok() + * i2400m_is_boot_barker() * i2400m_dev_reset_handle() * i2400mu_rx_kick() */ @@ -87,32 +88,21 @@ int i2400mu_notification_grok(struct i2400mu *i2400mu, const void *buf, d_fnstart(4, dev, "(i2400m %p buf %p buf_len %zu)\n", i2400mu, buf, buf_len); ret = -EIO; - if (buf_len < sizeof(i2400m_NBOOT_BARKER)) + if (buf_len < sizeof(i2400m_ZERO_BARKER)) /* Not a bug, just ignore */ goto error_bad_size; - if (!memcmp(i2400m_NBOOT_BARKER, buf, sizeof(i2400m_NBOOT_BARKER)) - || !memcmp(i2400m_SBOOT_BARKER, buf, sizeof(i2400m_SBOOT_BARKER))) - ret = i2400m_dev_reset_handle(i2400m); - else if (!memcmp(i2400m_ZERO_BARKER, buf, sizeof(i2400m_ZERO_BARKER))) { + ret = 0; + if (!memcmp(i2400m_ZERO_BARKER, buf, sizeof(i2400m_ZERO_BARKER))) { i2400mu_rx_kick(i2400mu); - ret = 0; - } else { /* Unknown or unexpected data in the notif message */ - char prefix[64]; - ret = -EIO; - dev_err(dev, "HW BUG? Unknown/unexpected data in notification " - "message (%zu bytes)\n", buf_len); - snprintf(prefix, sizeof(prefix), "%s %s: ", - dev_driver_string(dev), dev_name(dev)); - if (buf_len > 64) { - print_hex_dump(KERN_ERR, prefix, DUMP_PREFIX_OFFSET, - 8, 4, buf, 64, 0); - printk(KERN_ERR "%s... (only first 64 bytes " - "dumped)\n", prefix); - } else - print_hex_dump(KERN_ERR, prefix, DUMP_PREFIX_OFFSET, - 8, 4, buf, buf_len, 0); + goto out; } + ret = i2400m_is_boot_barker(i2400m, buf, buf_len); + if (unlikely(ret >= 0)) + ret = i2400m_dev_reset_handle(i2400m); + else /* Unknown or unexpected data in the notif message */ + i2400m_unknown_barker(i2400m, buf, buf_len); error_bad_size: +out: d_fnend(4, dev, "(i2400m %p buf %p buf_len %zu) = %d\n", i2400mu, buf, buf_len, ret); return ret; |