diff options
Diffstat (limited to 'drivers')
| -rw-r--r-- | drivers/ata/sata_sx4.c | 115 |
1 files changed, 63 insertions, 52 deletions
diff --git a/drivers/ata/sata_sx4.c b/drivers/ata/sata_sx4.c index 2d14f3d56d9..ff0a78dc8b8 100644 --- a/drivers/ata/sata_sx4.c +++ b/drivers/ata/sata_sx4.c @@ -87,48 +87,59 @@ enum { board_20621 = 0, /* FastTrak S150 SX4 */ - PDC_RESET = (1 << 11), /* HDMA reset */ + PDC_MASK_INT = (1 << 10), /* HDMA/ATA mask int */ + PDC_RESET = (1 << 11), /* HDMA/ATA reset */ PDC_MAX_HDMA = 32, PDC_HDMA_Q_MASK = (PDC_MAX_HDMA - 1), - PDC_DIMM0_SPD_DEV_ADDRESS = 0x50, - PDC_DIMM1_SPD_DEV_ADDRESS = 0x51, - PDC_MAX_DIMM_MODULE = 0x02, - PDC_I2C_CONTROL_OFFSET = 0x48, - PDC_I2C_ADDR_DATA_OFFSET = 0x4C, - PDC_DIMM0_CONTROL_OFFSET = 0x80, - PDC_DIMM1_CONTROL_OFFSET = 0x84, - PDC_SDRAM_CONTROL_OFFSET = 0x88, - PDC_I2C_WRITE = 0x00000000, - PDC_I2C_READ = 0x00000040, - PDC_I2C_START = 0x00000080, - PDC_I2C_MASK_INT = 0x00000020, - PDC_I2C_COMPLETE = 0x00010000, - PDC_I2C_NO_ACK = 0x00100000, - PDC_DIMM_SPD_SUBADDRESS_START = 0x00, - PDC_DIMM_SPD_SUBADDRESS_END = 0x7F, - PDC_DIMM_SPD_ROW_NUM = 3, - PDC_DIMM_SPD_COLUMN_NUM = 4, - PDC_DIMM_SPD_MODULE_ROW = 5, - PDC_DIMM_SPD_TYPE = 11, - PDC_DIMM_SPD_FRESH_RATE = 12, - PDC_DIMM_SPD_BANK_NUM = 17, - PDC_DIMM_SPD_CAS_LATENCY = 18, - PDC_DIMM_SPD_ATTRIBUTE = 21, - PDC_DIMM_SPD_ROW_PRE_CHARGE = 27, - PDC_DIMM_SPD_ROW_ACTIVE_DELAY = 28, - PDC_DIMM_SPD_RAS_CAS_DELAY = 29, - PDC_DIMM_SPD_ACTIVE_PRECHARGE = 30, - PDC_DIMM_SPD_SYSTEM_FREQ = 126, - PDC_CTL_STATUS = 0x08, - PDC_DIMM_WINDOW_CTLR = 0x0C, - PDC_TIME_CONTROL = 0x3C, - PDC_TIME_PERIOD = 0x40, - PDC_TIME_COUNTER = 0x44, - PDC_GENERAL_CTLR = 0x484, - PCI_PLL_INIT = 0x8A531824, - PCI_X_TCOUNT = 0xEE1E5CFF + PDC_DIMM0_SPD_DEV_ADDRESS = 0x50, + PDC_DIMM1_SPD_DEV_ADDRESS = 0x51, + PDC_I2C_CONTROL = 0x48, + PDC_I2C_ADDR_DATA = 0x4C, + PDC_DIMM0_CONTROL = 0x80, + PDC_DIMM1_CONTROL = 0x84, + PDC_SDRAM_CONTROL = 0x88, + PDC_I2C_WRITE = 0, /* master -> slave */ + PDC_I2C_READ = (1 << 6), /* master <- slave */ + PDC_I2C_START = (1 << 7), /* start I2C proto */ + PDC_I2C_MASK_INT = (1 << 5), /* mask I2C interrupt */ + PDC_I2C_COMPLETE = (1 << 16), /* I2C normal compl. */ + PDC_I2C_NO_ACK = (1 << 20), /* slave no-ack addr */ + PDC_DIMM_SPD_SUBADDRESS_START = 0x00, + PDC_DIMM_SPD_SUBADDRESS_END = 0x7F, + PDC_DIMM_SPD_ROW_NUM = 3, + PDC_DIMM_SPD_COLUMN_NUM = 4, + PDC_DIMM_SPD_MODULE_ROW = 5, + PDC_DIMM_SPD_TYPE = 11, + PDC_DIMM_SPD_FRESH_RATE = 12, + PDC_DIMM_SPD_BANK_NUM = 17, + PDC_DIMM_SPD_CAS_LATENCY = 18, + PDC_DIMM_SPD_ATTRIBUTE = 21, + PDC_DIMM_SPD_ROW_PRE_CHARGE = 27, + PDC_DIMM_SPD_ROW_ACTIVE_DELAY = 28, + PDC_DIMM_SPD_RAS_CAS_DELAY = 29, + PDC_DIMM_SPD_ACTIVE_PRECHARGE = 30, + PDC_DIMM_SPD_SYSTEM_FREQ = 126, + PDC_CTL_STATUS = 0x08, + PDC_DIMM_WINDOW_CTLR = 0x0C, + PDC_TIME_CONTROL = 0x3C, + PDC_TIME_PERIOD = 0x40, + PDC_TIME_COUNTER = 0x44, + PDC_GENERAL_CTLR = 0x484, + PCI_PLL_INIT = 0x8A531824, + PCI_X_TCOUNT = 0xEE1E5CFF, + + /* PDC_TIME_CONTROL bits */ + PDC_TIMER_BUZZER = (1 << 10), + PDC_TIMER_MODE_PERIODIC = 0, /* bits 9:8 == 00 */ + PDC_TIMER_MODE_ONCE = (1 << 8), /* bits 9:8 == 01 */ + PDC_TIMER_ENABLE = (1 << 7), + PDC_TIMER_MASK_INT = (1 << 5), + PDC_TIMER_SEQ_MASK = 0x1f, /* SEQ ID for timer */ + PDC_TIMER_DEFAULT = PDC_TIMER_MODE_ONCE | + PDC_TIMER_ENABLE | + PDC_TIMER_MASK_INT, }; @@ -999,17 +1010,17 @@ static unsigned int pdc20621_i2c_read(struct ata_host *host, u32 device, i2creg |= subaddr << 16; /* Set the device and subaddress */ - writel(i2creg, mmio + PDC_I2C_ADDR_DATA_OFFSET); - readl(mmio + PDC_I2C_ADDR_DATA_OFFSET); + writel(i2creg, mmio + PDC_I2C_ADDR_DATA); + readl(mmio + PDC_I2C_ADDR_DATA); /* Write Control to perform read operation, mask int */ writel(PDC_I2C_READ | PDC_I2C_START | PDC_I2C_MASK_INT, - mmio + PDC_I2C_CONTROL_OFFSET); + mmio + PDC_I2C_CONTROL); for (count = 0; count <= 1000; count ++) { - status = readl(mmio + PDC_I2C_CONTROL_OFFSET); + status = readl(mmio + PDC_I2C_CONTROL); if (status & PDC_I2C_COMPLETE) { - status = readl(mmio + PDC_I2C_ADDR_DATA_OFFSET); + status = readl(mmio + PDC_I2C_ADDR_DATA); break; } else if (count == 1000) return 0; @@ -1099,8 +1110,8 @@ static int pdc20621_prog_dimm0(struct ata_host *host) data |= (((size / 16) - 1) << 16); data |= (0 << 23); data |= 8; - writel(data, mmio + PDC_DIMM0_CONTROL_OFFSET); - readl(mmio + PDC_DIMM0_CONTROL_OFFSET); + writel(data, mmio + PDC_DIMM0_CONTROL); + readl(mmio + PDC_DIMM0_CONTROL); return size; } @@ -1122,27 +1133,27 @@ static unsigned int pdc20621_prog_dimm_global(struct ata_host *host) */ data = 0x022259F1; - writel(data, mmio + PDC_SDRAM_CONTROL_OFFSET); - readl(mmio + PDC_SDRAM_CONTROL_OFFSET); + writel(data, mmio + PDC_SDRAM_CONTROL); + readl(mmio + PDC_SDRAM_CONTROL); /* Turn on for ECC */ pdc20621_i2c_read(host, PDC_DIMM0_SPD_DEV_ADDRESS, PDC_DIMM_SPD_TYPE, &spd0); if (spd0 == 0x02) { data |= (0x01 << 16); - writel(data, mmio + PDC_SDRAM_CONTROL_OFFSET); - readl(mmio + PDC_SDRAM_CONTROL_OFFSET); + writel(data, mmio + PDC_SDRAM_CONTROL); + readl(mmio + PDC_SDRAM_CONTROL); printk(KERN_ERR "Local DIMM ECC Enabled\n"); } /* DIMM Initialization Select/Enable (bit 18/19) */ data &= (~(1<<18)); data |= (1<<19); - writel(data, mmio + PDC_SDRAM_CONTROL_OFFSET); + writel(data, mmio + PDC_SDRAM_CONTROL); error = 1; for (i = 1; i <= 10; i++) { /* polling ~5 secs */ - data = readl(mmio + PDC_SDRAM_CONTROL_OFFSET); + data = readl(mmio + PDC_SDRAM_CONTROL); if (!(data & (1<<19))) { error = 0; break; @@ -1176,7 +1187,7 @@ static unsigned int pdc20621_dimm_init(struct ata_host *host) VPRINTK("Time Period Register (0x40): 0x%x\n", time_period); /* Enable timer */ - writel(0x00001a0, mmio + PDC_TIME_CONTROL); + writel(PDC_TIMER_DEFAULT, mmio + PDC_TIME_CONTROL); readl(mmio + PDC_TIME_CONTROL); /* Wait 3 seconds */ |