aboutsummaryrefslogtreecommitdiff
path: root/include/asm-arm/arch-clps711x/hardware.h
diff options
context:
space:
mode:
Diffstat (limited to 'include/asm-arm/arch-clps711x/hardware.h')
-rw-r--r--include/asm-arm/arch-clps711x/hardware.h117
1 files changed, 117 insertions, 0 deletions
diff --git a/include/asm-arm/arch-clps711x/hardware.h b/include/asm-arm/arch-clps711x/hardware.h
index 1386871e1a5..f864c367c93 100644
--- a/include/asm-arm/arch-clps711x/hardware.h
+++ b/include/asm-arm/arch-clps711x/hardware.h
@@ -235,4 +235,121 @@
#define CEIVA_PB0_BLK_BTN (1<<0)
#endif // #if defined (CONFIG_ARCH_CEIVA)
+#if defined (CONFIG_MACH_MP1000)
+/* NOR FLASH */
+#define MP1000_NIO_BASE 0xf9000000 /* virtual */
+#define MP1000_NIO_START CS0_PHYS_BASE /* physical */
+#define MP1000_NIO_SIZE 0x00400000
+
+/* DSP Interface */
+#define MP1000_DSP_BASE 0xfa000000 /* virtual */
+#define MP1000_DSP_START CS1_PHYS_BASE /* physical */
+#define MP1000_DSP_SIZE 0x00100000
+
+/* LCD, DAA/DSP, RTC, DAA RW Reg all in CS2 */
+#define MP1000_LIO_BASE 0xfb000000 /* virtual */
+#define MP1000_LIO_START CS2_PHYS_BASE /* physical */
+#define MP1000_LIO_SIZE 0x00100000
+
+/* NAND FLASH */
+#define MP1000_FIO_BASE 0xfc000000 /* virtual */
+#define MP1000_FIO_START CS3_PHYS_BASE /* physical */
+#define MP1000_FIO_SIZE 0x00800000
+
+/* Ethernet */
+#define MP1000_EIO_BASE 0xfd000000 /* virtual */
+#define MP1000_EIO_START CS4_PHYS_BASE /* physical */
+#define MP1000_EIO_SIZE 0x00100000
+
+#define MP1000_LCD_OFFSET 0x00000000 /* LCD offset in CS2 */
+#define MP1000_DDD_OFFSET 0x00001000 /* DAA/DAI/DSP sft reset offst*/
+#define MP1000_RTC_OFFSET 0x00002000 /* RTC offset in CS2 */
+#define MP1000_DAA_OFFSET 0x00003000 /* DAA RW reg offset in CS2 */
+
+/* IDE */
+#define MP1000_IDE_BASE 0xfe000000 /* virtual */
+#define MP1000_IDE_START CS5_PHYS_BASE /* physical */
+#define MP1000_IDE_SIZE 0x00100000 /* actually it's only 0x1000 */
+
+#define IRQ_HARDDISK IRQ_EINT2
+
+/*
+ * IDE registers definition
+ */
+
+#define IDE_CONTROL_BASE (MP1000_IDE_BASE + 0x1000)
+#define IDE_BASE_OFF (MP1000_IDE_BASE)
+
+#define IDE_WRITE_DEVICE_DATA (IDE_BASE_OFF + 0x0)
+#define IDE_FEATURES_REGISTER (IDE_BASE_OFF + 0x2)
+#define IDE_SECTOR_COUNT_REGISTER (IDE_BASE_OFF + 0x4)
+#define IDE_SECTOR_NUMBER_REGISTER (IDE_BASE_OFF + 0x6)
+#define IDE_CYLINDER_LOW_REGISTER (IDE_BASE_OFF + 0x8)
+#define IDE_CYLINDER_HIGH_REGISTER (IDE_BASE_OFF + 0xa)
+#define IDE_DEVICE_HEAD_REGISTER (IDE_BASE_OFF + 0xc)
+#define IDE_COMMAND_DATA_REGISTER (IDE_BASE_OFF + 0xe)
+#define IDE_DEVICE_CONTROL_REGISTER (IDE_CONTROL_BASE + 0xc)
+
+#define IDE_IRQ IRQ_EINT2
+
+
+#define RTC_PORT(x) (MP1000_LIO_BASE+0x2000 + (x*2))
+#define RTC_ALWAYS_BCD 0
+
+/*
+// Definitions of the bit fields in the HwPortA register for the
+// MP1000 board.
+*/
+#define HwPortAKeyboardRow1 0x00000001
+#define HwPortAKeyboardRow2 0x00000002
+#define HwPortAKeyboardRow3 0x00000004
+#define HwPortAKeyboardRow4 0x00000008
+#define HwPortAKeyboardRow5 0x00000010
+#define HwPortAKeyboardRow6 0x00000020
+#define HwPortALCDEnable 0x00000040
+#define HwPortAOffhook 0x00000080
+
+/*
+// Definitions of the bit fields in the HwPortB register for the
+// MP1000 board.
+*/
+#define HwPortBL3Mode 0x00000001
+#define HwPortBL3Clk 0x00000002
+#define HwPortBSClk 0x00000001
+#define HwPortBSData 0x00000002
+#define HwPortBL3Data 0x00000004
+#define HwPortBMute 0x00000008
+#define HwPortBQD0 0x00000010
+#define HwPortBQD1 0x00000020
+#define HwPortBQD2 0x00000040
+#define HwPortBQD3 0x00000080
+
+/*
+// Definitions of the bit fields in the HwPortD register for the
+// MP1000 board.
+*/
+#define HwPortDLED1 0x00000001
+#define HwPortDLED2 0x00000002
+#define HwPortDLED3 0x00000004
+#define HwPortDLED4 0x00000008
+#define HwPortDLED5 0x00000010
+#define HwPortDEECS 0x00000020
+#define HwPortBRTS 0x00000040
+#define HwPortBRI 0x00000080
+
+
+/*
+// Definitions of the bit fields in the HwPortE register for the
+// MP1000 board.
+*/
+
+#define HwPortECLE 0x00000001
+#define HwPortESepromDOut 0x00000001
+#define HwPortEALE 0x00000002
+#define HwPortESepromDIn 0x00000002
+#define HwPortENANDCS 0x00000004
+#define HwPortESepromCLK 0x00000004
+
+#endif // #if defined (CONFIG_MACH_MP1000)
+
#endif