aboutsummaryrefslogtreecommitdiff
path: root/include/asm-arm/arch-imx/irqs.h
diff options
context:
space:
mode:
Diffstat (limited to 'include/asm-arm/arch-imx/irqs.h')
-rw-r--r--include/asm-arm/arch-imx/irqs.h116
1 files changed, 0 insertions, 116 deletions
diff --git a/include/asm-arm/arch-imx/irqs.h b/include/asm-arm/arch-imx/irqs.h
deleted file mode 100644
index f195542898e..00000000000
--- a/include/asm-arm/arch-imx/irqs.h
+++ /dev/null
@@ -1,116 +0,0 @@
-/*
- * linux/include/asm-arm/arch-imxads/irqs.h
- *
- * Copyright (C) 1999 ARM Limited
- * Copyright (C) 2000 Deep Blue Solutions Ltd.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
- */
-
-#ifndef __ARM_IRQS_H__
-#define __ARM_IRQS_H__
-
-/* Use the imx definitions */
-#include <asm/hardware.h>
-
-/*
- * IMX Interrupt numbers
- *
- */
-#define INT_SOFTINT 0
-#define CSI_INT 6
-#define DSPA_MAC_INT 7
-#define DSPA_INT 8
-#define COMP_INT 9
-#define MSHC_XINT 10
-#define GPIO_INT_PORTA 11
-#define GPIO_INT_PORTB 12
-#define GPIO_INT_PORTC 13
-#define LCDC_INT 14
-#define SIM_INT 15
-#define SIM_DATA_INT 16
-#define RTC_INT 17
-#define RTC_SAMINT 18
-#define UART2_MINT_PFERR 19
-#define UART2_MINT_RTS 20
-#define UART2_MINT_DTR 21
-#define UART2_MINT_UARTC 22
-#define UART2_MINT_TX 23
-#define UART2_MINT_RX 24
-#define UART1_MINT_PFERR 25
-#define UART1_MINT_RTS 26
-#define UART1_MINT_DTR 27
-#define UART1_MINT_UARTC 28
-#define UART1_MINT_TX 29
-#define UART1_MINT_RX 30
-#define VOICE_DAC_INT 31
-#define VOICE_ADC_INT 32
-#define PEN_DATA_INT 33
-#define PWM_INT 34
-#define SDHC_INT 35
-#define I2C_INT 39
-#define CSPI_INT 41
-#define SSI_TX_INT 42
-#define SSI_TX_ERR_INT 43
-#define SSI_RX_INT 44
-#define SSI_RX_ERR_INT 45
-#define TOUCH_INT 46
-#define USBD_INT0 47
-#define USBD_INT1 48
-#define USBD_INT2 49
-#define USBD_INT3 50
-#define USBD_INT4 51
-#define USBD_INT5 52
-#define USBD_INT6 53
-#define BTSYS_INT 55
-#define BTTIM_INT 56
-#define BTWUI_INT 57
-#define TIM2_INT 58
-#define TIM1_INT 59
-#define DMA_ERR 60
-#define DMA_INT 61
-#define GPIO_INT_PORTD 62
-
-#define IMX_IRQS (64)
-
-/* note: the IMX has four gpio ports (A-D), but only
- * the following pins are connected to the outside
- * world:
- *
- * PORT A: bits 0-31
- * PORT B: bits 8-31
- * PORT C: bits 3-17
- * PORT D: bits 6-31
- *
- * We map these interrupts straight on. As a result we have
- * several holes in the interrupt mapping. We do this for two
- * reasons:
- * - mapping the interrupts without holes would get
- * far more complicated
- * - Motorola could well decide to bring some processor
- * with more pins connected
- */
-
-#define IRQ_GPIOA(x) (IMX_IRQS + x)
-#define IRQ_GPIOB(x) (IRQ_GPIOA(32) + x)
-#define IRQ_GPIOC(x) (IRQ_GPIOB(32) + x)
-#define IRQ_GPIOD(x) (IRQ_GPIOC(32) + x)
-
-/* decode irq number to use with IMR(x), ISR(x) and friends */
-#define IRQ_TO_REG(irq) ((irq - IMX_IRQS) >> 5)
-
-#define NR_IRQS (IRQ_GPIOD(32) + 1)
-#define IRQ_GPIO(x)
-#endif