aboutsummaryrefslogtreecommitdiff
path: root/include/asm-blackfin/mach-bf548/defBF542.h
diff options
context:
space:
mode:
Diffstat (limited to 'include/asm-blackfin/mach-bf548/defBF542.h')
-rw-r--r--include/asm-blackfin/mach-bf548/defBF542.h925
1 files changed, 0 insertions, 925 deletions
diff --git a/include/asm-blackfin/mach-bf548/defBF542.h b/include/asm-blackfin/mach-bf548/defBF542.h
deleted file mode 100644
index a7c809f29ed..00000000000
--- a/include/asm-blackfin/mach-bf548/defBF542.h
+++ /dev/null
@@ -1,925 +0,0 @@
-/*
- * File: include/asm-blackfin/mach-bf548/defBF542.h
- * Based on:
- * Author:
- *
- * Created:
- * Description:
- *
- * Rev:
- *
- * Modified:
- *
- * Bugs: Enter bugs at http://blackfin.uclinux.org/
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2, or (at your option)
- * any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; see the file COPYING.
- * If not, write to the Free Software Foundation,
- * 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.
- */
-
-#ifndef _DEF_BF542_H
-#define _DEF_BF542_H
-
-/* Include all Core registers and bit definitions */
-#include <asm/mach-common/def_LPBlackfin.h>
-
-/* SYSTEM & MMR ADDRESS DEFINITIONS FOR ADSP-BF542 */
-
-/* Include defBF54x_base.h for the set of #defines that are common to all ADSP-BF54x processors */
-#include "defBF54x_base.h"
-
-/* The following are the #defines needed by ADSP-BF542 that are not in the common header */
-
-/* ATAPI Registers */
-
-#define ATAPI_CONTROL 0xffc03800 /* ATAPI Control Register */
-#define ATAPI_STATUS 0xffc03804 /* ATAPI Status Register */
-#define ATAPI_DEV_ADDR 0xffc03808 /* ATAPI Device Register Address */
-#define ATAPI_DEV_TXBUF 0xffc0380c /* ATAPI Device Register Write Data */
-#define ATAPI_DEV_RXBUF 0xffc03810 /* ATAPI Device Register Read Data */
-#define ATAPI_INT_MASK 0xffc03814 /* ATAPI Interrupt Mask Register */
-#define ATAPI_INT_STATUS 0xffc03818 /* ATAPI Interrupt Status Register */
-#define ATAPI_XFER_LEN 0xffc0381c /* ATAPI Length of Transfer */
-#define ATAPI_LINE_STATUS 0xffc03820 /* ATAPI Line Status */
-#define ATAPI_SM_STATE 0xffc03824 /* ATAPI State Machine Status */
-#define ATAPI_TERMINATE 0xffc03828 /* ATAPI Host Terminate */
-#define ATAPI_PIO_TFRCNT 0xffc0382c /* ATAPI PIO mode transfer count */
-#define ATAPI_DMA_TFRCNT 0xffc03830 /* ATAPI DMA mode transfer count */
-#define ATAPI_UMAIN_TFRCNT 0xffc03834 /* ATAPI UDMAIN transfer count */
-#define ATAPI_UDMAOUT_TFRCNT 0xffc03838 /* ATAPI UDMAOUT transfer count */
-#define ATAPI_REG_TIM_0 0xffc03840 /* ATAPI Register Transfer Timing 0 */
-#define ATAPI_PIO_TIM_0 0xffc03844 /* ATAPI PIO Timing 0 Register */
-#define ATAPI_PIO_TIM_1 0xffc03848 /* ATAPI PIO Timing 1 Register */
-#define ATAPI_MULTI_TIM_0 0xffc03850 /* ATAPI Multi-DMA Timing 0 Register */
-#define ATAPI_MULTI_TIM_1 0xffc03854 /* ATAPI Multi-DMA Timing 1 Register */
-#define ATAPI_MULTI_TIM_2 0xffc03858 /* ATAPI Multi-DMA Timing 2 Register */
-#define ATAPI_ULTRA_TIM_0 0xffc03860 /* ATAPI Ultra-DMA Timing 0 Register */
-#define ATAPI_ULTRA_TIM_1 0xffc03864 /* ATAPI Ultra-DMA Timing 1 Register */
-#define ATAPI_ULTRA_TIM_2 0xffc03868 /* ATAPI Ultra-DMA Timing 2 Register */
-#define ATAPI_ULTRA_TIM_3 0xffc0386c /* ATAPI Ultra-DMA Timing 3 Register */
-
-/* SDH Registers */
-
-#define SDH_PWR_CTL 0xffc03900 /* SDH Power Control */
-#define SDH_CLK_CTL 0xffc03904 /* SDH Clock Control */
-#define SDH_ARGUMENT 0xffc03908 /* SDH Argument */
-#define SDH_COMMAND 0xffc0390c /* SDH Command */
-#define SDH_RESP_CMD 0xffc03910 /* SDH Response Command */
-#define SDH_RESPONSE0 0xffc03914 /* SDH Response0 */
-#define SDH_RESPONSE1 0xffc03918 /* SDH Response1 */
-#define SDH_RESPONSE2 0xffc0391c /* SDH Response2 */
-#define SDH_RESPONSE3 0xffc03920 /* SDH Response3 */
-#define SDH_DATA_TIMER 0xffc03924 /* SDH Data Timer */
-#define SDH_DATA_LGTH 0xffc03928 /* SDH Data Length */
-#define SDH_DATA_CTL 0xffc0392c /* SDH Data Control */
-#define SDH_DATA_CNT 0xffc03930 /* SDH Data Counter */
-#define SDH_STATUS 0xffc03934 /* SDH Status */
-#define SDH_STATUS_CLR 0xffc03938 /* SDH Status Clear */
-#define SDH_MASK0 0xffc0393c /* SDH Interrupt0 Mask */
-#define SDH_MASK1 0xffc03940 /* SDH Interrupt1 Mask */
-#define SDH_FIFO_CNT 0xffc03948 /* SDH FIFO Counter */
-#define SDH_FIFO 0xffc03980 /* SDH Data FIFO */
-#define SDH_E_STATUS 0xffc039c0 /* SDH Exception Status */
-#define SDH_E_MASK 0xffc039c4 /* SDH Exception Mask */
-#define SDH_CFG 0xffc039c8 /* SDH Configuration */
-#define SDH_RD_WAIT_EN 0xffc039cc /* SDH Read Wait Enable */
-#define SDH_PID0 0xffc039d0 /* SDH Peripheral Identification0 */
-#define SDH_PID1 0xffc039d4 /* SDH Peripheral Identification1 */
-#define SDH_PID2 0xffc039d8 /* SDH Peripheral Identification2 */
-#define SDH_PID3 0xffc039dc /* SDH Peripheral Identification3 */
-#define SDH_PID4 0xffc039e0 /* SDH Peripheral Identification4 */
-#define SDH_PID5 0xffc039e4 /* SDH Peripheral Identification5 */
-#define SDH_PID6 0xffc039e8 /* SDH Peripheral Identification6 */
-#define SDH_PID7 0xffc039ec /* SDH Peripheral Identification7 */
-
-/* USB Control Registers */
-
-#define USB_FADDR 0xffc03c00 /* Function address register */
-#define USB_POWER 0xffc03c04 /* Power management register */
-#define USB_INTRTX 0xffc03c08 /* Interrupt register for endpoint 0 and Tx endpoint 1 to 7 */
-#define USB_INTRRX 0xffc03c0c /* Interrupt register for Rx endpoints 1 to 7 */
-#define USB_INTRTXE 0xffc03c10 /* Interrupt enable register for IntrTx */
-#define USB_INTRRXE 0xffc03c14 /* Interrupt enable register for IntrRx */
-#define USB_INTRUSB 0xffc03c18 /* Interrupt register for common USB interrupts */
-#define USB_INTRUSBE 0xffc03c1c /* Interrupt enable register for IntrUSB */
-#define USB_FRAME 0xffc03c20 /* USB frame number */
-#define USB_INDEX 0xffc03c24 /* Index register for selecting the indexed endpoint registers */
-#define USB_TESTMODE 0xffc03c28 /* Enabled USB 20 test modes */
-#define USB_GLOBINTR 0xffc03c2c /* Global Interrupt Mask register and Wakeup Exception Interrupt */
-#define USB_GLOBAL_CTL 0xffc03c30 /* Global Clock Control for the core */
-
-/* USB Packet Control Registers */
-
-#define USB_TX_MAX_PACKET 0xffc03c40 /* Maximum packet size for Host Tx endpoint */
-#define USB_CSR0 0xffc03c44 /* Control Status register for endpoint 0 and Control Status register for Host Tx endpoint */
-#define USB_TXCSR 0xffc03c44 /* Control Status register for endpoint 0 and Control Status register for Host Tx endpoint */
-#define USB_RX_MAX_PACKET 0xffc03c48 /* Maximum packet size for Host Rx endpoint */
-#define USB_RXCSR 0xffc03c4c /* Control Status register for Host Rx endpoint */
-#define USB_COUNT0 0xffc03c50 /* Number of bytes received in endpoint 0 FIFO and Number of bytes received in Host Tx endpoint */
-#define USB_RXCOUNT 0xffc03c50 /* Number of bytes received in endpoint 0 FIFO and Number of bytes received in Host Tx endpoint */
-#define USB_TXTYPE 0xffc03c54 /* Sets the transaction protocol and peripheral endpoint number for the Host Tx endpoint */
-#define USB_NAKLIMIT0 0xffc03c58 /* Sets the NAK response timeout on Endpoint 0 and on Bulk transfers for Host Tx endpoint */
-#define USB_TXINTERVAL 0xffc03c58 /* Sets the NAK response timeout on Endpoint 0 and on Bulk transfers for Host Tx endpoint */
-#define USB_RXTYPE 0xffc03c5c /* Sets the transaction protocol and peripheral endpoint number for the Host Rx endpoint */
-#define USB_RXINTERVAL 0xffc03c60 /* Sets the polling interval for Interrupt and Isochronous transfers or the NAK response timeout on Bulk transfers */
-#define USB_TXCOUNT 0xffc03c68 /* Number of bytes to be written to the selected endpoint Tx FIFO */
-
-/* USB Endpoint FIFO Registers */
-
-#define USB_EP0_FIFO 0xffc03c80 /* Endpoint 0 FIFO */
-#define USB_EP1_FIFO 0xffc03c88 /* Endpoint 1 FIFO */
-#define USB_EP2_FIFO 0xffc03c90 /* Endpoint 2 FIFO */
-#define USB_EP3_FIFO 0xffc03c98 /* Endpoint 3 FIFO */
-#define USB_EP4_FIFO 0xffc03ca0 /* Endpoint 4 FIFO */
-#define USB_EP5_FIFO 0xffc03ca8 /* Endpoint 5 FIFO */
-#define USB_EP6_FIFO 0xffc03cb0 /* Endpoint 6 FIFO */
-#define USB_EP7_FIFO 0xffc03cb8 /* Endpoint 7 FIFO */
-
-/* USB OTG Control Registers */
-
-#define USB_OTG_DEV_CTL 0xffc03d00 /* OTG Device Control Register */
-#define USB_OTG_VBUS_IRQ 0xffc03d04 /* OTG VBUS Control Interrupts */
-#define USB_OTG_VBUS_MASK 0xffc03d08 /* VBUS Control Interrupt Enable */
-
-/* USB Phy Control Registers */
-
-#define USB_LINKINFO 0xffc03d48 /* Enables programming of some PHY-side delays */
-#define USB_VPLEN 0xffc03d4c /* Determines duration of VBUS pulse for VBUS charging */
-#define USB_HS_EOF1 0xffc03d50 /* Time buffer for High-Speed transactions */
-#define USB_FS_EOF1 0xffc03d54 /* Time buffer for Full-Speed transactions */
-#define USB_LS_EOF1 0xffc03d58 /* Time buffer for Low-Speed transactions */
-
-/* (APHY_CNTRL is for ADI usage only) */
-
-#define USB_APHY_CNTRL 0xffc03de0 /* Register that increases visibility of Analog PHY */
-
-/* (APHY_CALIB is for ADI usage only) */
-
-#define USB_APHY_CALIB 0xffc03de4 /* Register used to set some calibration values */
-#define USB_APHY_CNTRL2 0xffc03de8 /* Register used to prevent re-enumeration once Moab goes into hibernate mode */
-
-/* (PHY_TEST is for ADI usage only) */
-
-#define USB_PHY_TEST 0xffc03dec /* Used for reducing simulation time and simplifies FIFO testability */
-#define USB_PLLOSC_CTRL 0xffc03df0 /* Used to program different parameters for USB PLL and Oscillator */
-#define USB_SRP_CLKDIV 0xffc03df4 /* Used to program clock divide value for the clock fed to the SRP detection logic */
-
-/* USB Endpoint 0 Control Registers */
-
-#define USB_EP_NI0_TXMAXP 0xffc03e00 /* Maximum packet size for Host Tx endpoint0 */
-#define USB_EP_NI0_TXCSR 0xffc03e04 /* Control Status register for endpoint 0 */
-#define USB_EP_NI0_RXMAXP 0xffc03e08 /* Maximum packet size for Host Rx endpoint0 */
-#define USB_EP_NI0_RXCSR 0xffc03e0c /* Control Status register for Host Rx endpoint0 */
-#define USB_EP_NI0_RXCOUNT 0xffc03e10 /* Number of bytes received in endpoint 0 FIFO */
-#define USB_EP_NI0_TXTYPE 0xffc03e14 /* Sets the transaction protocol and peripheral endpoint number for the Host Tx endpoint0 */
-#define USB_EP_NI0_TXINTERVAL 0xffc03e18 /* Sets the NAK response timeout on Endpoint 0 */
-#define USB_EP_NI0_RXTYPE 0xffc03e1c /* Sets the transaction protocol and peripheral endpoint number for the Host Rx endpoint0 */
-#define USB_EP_NI0_RXINTERVAL 0xffc03e20 /* Sets the polling interval for Interrupt/Isochronous transfers or the NAK response timeout on Bulk transfers for Host Rx endpoint0 */
-
-/* USB Endpoint 1 Control Registers */
-
-#define USB_EP_NI0_TXCOUNT 0xffc03e28 /* Number of bytes to be written to the endpoint0 Tx FIFO */
-#define USB_EP_NI1_TXMAXP 0xffc03e40 /* Maximum packet size for Host Tx endpoint1 */
-#define USB_EP_NI1_TXCSR 0xffc03e44 /* Control Status register for endpoint1 */
-#define USB_EP_NI1_RXMAXP 0xffc03e48 /* Maximum packet size for Host Rx endpoint1 */
-#define USB_EP_NI1_RXCSR 0xffc03e4c /* Control Status register for Host Rx endpoint1 */
-#define USB_EP_NI1_RXCOUNT 0xffc03e50 /* Number of bytes received in endpoint1 FIFO */
-#define USB_EP_NI1_TXTYPE 0xffc03e54 /* Sets the transaction protocol and peripheral endpoint number for the Host Tx endpoint1 */
-#define USB_EP_NI1_TXINTERVAL 0xffc03e58 /* Sets the NAK response timeout on Endpoint1 */
-#define USB_EP_NI1_RXTYPE 0xffc03e5c /* Sets the transaction protocol and peripheral endpoint number for the Host Rx endpoint1 */
-#define USB_EP_NI1_RXINTERVAL 0xffc03e60 /* Sets the polling interval for Interrupt/Isochronous transfers or the NAK response timeout on Bulk transfers for Host Rx endpoint1 */
-
-/* USB Endpoint 2 Control Registers */
-
-#define USB_EP_NI1_TXCOUNT 0xffc03e68 /* Number of bytes to be written to the+H102 endpoint1 Tx FIFO */
-#define USB_EP_NI2_TXMAXP 0xffc03e80 /* Maximum packet size for Host Tx endpoint2 */
-#define USB_EP_NI2_TXCSR 0xffc03e84 /* Control Status register for endpoint2 */
-#define USB_EP_NI2_RXMAXP 0xffc03e88 /* Maximum packet size for Host Rx endpoint2 */
-#define USB_EP_NI2_RXCSR 0xffc03e8c /* Control Status register for Host Rx endpoint2 */
-#define USB_EP_NI2_RXCOUNT 0xffc03e90 /* Number of bytes received in endpoint2 FIFO */
-#define USB_EP_NI2_TXTYPE 0xffc03e94 /* Sets the transaction protocol and peripheral endpoint number for the Host Tx endpoint2 */
-#define USB_EP_NI2_TXINTERVAL 0xffc03e98 /* Sets the NAK response timeout on Endpoint2 */
-#define USB_EP_NI2_RXTYPE 0xffc03e9c /* Sets the transaction protocol and peripheral endpoint number for the Host Rx endpoint2 */
-#define USB_EP_NI2_RXINTERVAL 0xffc03ea0 /* Sets the polling interval for Interrupt/Isochronous transfers or the NAK response timeout on Bulk transfers for Host Rx endpoint2 */
-
-/* USB Endpoint 3 Control Registers */
-
-#define USB_EP_NI2_TXCOUNT 0xffc03ea8 /* Number of bytes to be written to the endpoint2 Tx FIFO */
-#define USB_EP_NI3_TXMAXP 0xffc03ec0 /* Maximum packet size for Host Tx endpoint3 */
-#define USB_EP_NI3_TXCSR 0xffc03ec4 /* Control Status register for endpoint3 */
-#define USB_EP_NI3_RXMAXP 0xffc03ec8 /* Maximum packet size for Host Rx endpoint3 */
-#define USB_EP_NI3_RXCSR 0xffc03ecc /* Control Status register for Host Rx endpoint3 */
-#define USB_EP_NI3_RXCOUNT 0xffc03ed0 /* Number of bytes received in endpoint3 FIFO */
-#define USB_EP_NI3_TXTYPE 0xffc03ed4 /* Sets the transaction protocol and peripheral endpoint number for the Host Tx endpoint3 */
-#define USB_EP_NI3_TXINTERVAL 0xffc03ed8 /* Sets the NAK response timeout on Endpoint3 */
-#define USB_EP_NI3_RXTYPE 0xffc03edc /* Sets the transaction protocol and peripheral endpoint number for the Host Rx endpoint3 */
-#define USB_EP_NI3_RXINTERVAL 0xffc03ee0 /* Sets the polling interval for Interrupt/Isochronous transfers or the NAK response timeout on Bulk transfers for Host Rx endpoint3 */
-
-/* USB Endpoint 4 Control Registers */
-
-#define USB_EP_NI3_TXCOUNT 0xffc03ee8 /* Number of bytes to be written to the H124endpoint3 Tx FIFO */
-#define USB_EP_NI4_TXMAXP 0xffc03f00 /* Maximum packet size for Host Tx endpoint4 */
-#define USB_EP_NI4_TXCSR 0xffc03f04 /* Control Status register for endpoint4 */
-#define USB_EP_NI4_RXMAXP 0xffc03f08 /* Maximum packet size for Host Rx endpoint4 */
-#define USB_EP_NI4_RXCSR 0xffc03f0c /* Control Status register for Host Rx endpoint4 */
-#define USB_EP_NI4_RXCOUNT 0xffc03f10 /* Number of bytes received in endpoint4 FIFO */
-#define USB_EP_NI4_TXTYPE 0xffc03f14 /* Sets the transaction protocol and peripheral endpoint number for the Host Tx endpoint4 */
-#define USB_EP_NI4_TXINTERVAL 0xffc03f18 /* Sets the NAK response timeout on Endpoint4 */
-#define USB_EP_NI4_RXTYPE 0xffc03f1c /* Sets the transaction protocol and peripheral endpoint number for the Host Rx endpoint4 */
-#define USB_EP_NI4_RXINTERVAL 0xffc03f20 /* Sets the polling interval for Interrupt/Isochronous transfers or the NAK response timeout on Bulk transfers for Host Rx endpoint4 */
-
-/* USB Endpoint 5 Control Registers */
-
-#define USB_EP_NI4_TXCOUNT 0xffc03f28 /* Number of bytes to be written to the endpoint4 Tx FIFO */
-#define USB_EP_NI5_TXMAXP 0xffc03f40 /* Maximum packet size for Host Tx endpoint5 */
-#define USB_EP_NI5_TXCSR 0xffc03f44 /* Control Status register for endpoint5 */
-#define USB_EP_NI5_RXMAXP 0xffc03f48 /* Maximum packet size for Host Rx endpoint5 */
-#define USB_EP_NI5_RXCSR 0xffc03f4c /* Control Status register for Host Rx endpoint5 */
-#define USB_EP_NI5_RXCOUNT 0xffc03f50 /* Number of bytes received in endpoint5 FIFO */
-#define USB_EP_NI5_TXTYPE 0xffc03f54 /* Sets the transaction protocol and peripheral endpoint number for the Host Tx endpoint5 */
-#define USB_EP_NI5_TXINTERVAL 0xffc03f58 /* Sets the NAK response timeout on Endpoint5 */
-#define USB_EP_NI5_RXTYPE 0xffc03f5c /* Sets the transaction protocol and peripheral endpoint number for the Host Rx endpoint5 */
-#define USB_EP_NI5_RXINTERVAL 0xffc03f60 /* Sets the polling interval for Interrupt/Isochronous transfers or the NAK response timeout on Bulk transfers for Host Rx endpoint5 */
-
-/* USB Endpoint 6 Control Registers */
-
-#define USB_EP_NI5_TXCOUNT 0xffc03f68 /* Number of bytes to be written to the H145endpoint5 Tx FIFO */
-#define USB_EP_NI6_TXMAXP 0xffc03f80 /* Maximum packet size for Host Tx endpoint6 */
-#define USB_EP_NI6_TXCSR 0xffc03f84 /* Control Status register for endpoint6 */
-#define USB_EP_NI6_RXMAXP 0xffc03f88 /* Maximum packet size for Host Rx endpoint6 */
-#define USB_EP_NI6_RXCSR 0xffc03f8c /* Control Status register for Host Rx endpoint6 */
-#define USB_EP_NI6_RXCOUNT 0xffc03f90 /* Number of bytes received in endpoint6 FIFO */
-#define USB_EP_NI6_TXTYPE 0xffc03f94 /* Sets the transaction protocol and peripheral endpoint number for the Host Tx endpoint6 */
-#define USB_EP_NI6_TXINTERVAL 0xffc03f98 /* Sets the NAK response timeout on Endpoint6 */
-#define USB_EP_NI6_RXTYPE 0xffc03f9c /* Sets the transaction protocol and peripheral endpoint number for the Host Rx endpoint6 */
-#define USB_EP_NI6_RXINTERVAL 0xffc03fa0 /* Sets the polling interval for Interrupt/Isochronous transfers or the NAK response timeout on Bulk transfers for Host Rx endpoint6 */
-
-/* USB Endpoint 7 Control Registers */
-
-#define USB_EP_NI6_TXCOUNT 0xffc03fa8 /* Number of bytes to be written to the endpoint6 Tx FIFO */
-#define USB_EP_NI7_TXMAXP 0xffc03fc0 /* Maximum packet size for Host Tx endpoint7 */
-#define USB_EP_NI7_TXCSR 0xffc03fc4 /* Control Status register for endpoint7 */
-#define USB_EP_NI7_RXMAXP 0xffc03fc8 /* Maximum packet size for Host Rx endpoint7 */
-#define USB_EP_NI7_RXCSR 0xffc03fcc /* Control Status register for Host Rx endpoint7 */
-#define USB_EP_NI7_RXCOUNT 0xffc03fd0 /* Number of bytes received in endpoint7 FIFO */
-#define USB_EP_NI7_TXTYPE 0xffc03fd4 /* Sets the transaction protocol and peripheral endpoint number for the Host Tx endpoint7 */
-#define USB_EP_NI7_TXINTERVAL 0xffc03fd8 /* Sets the NAK response timeout on Endpoint7 */
-#define USB_EP_NI7_RXTYPE 0xffc03fdc /* Sets the transaction protocol and peripheral endpoint number for the Host Rx endpoint7 */
-#define USB_EP_NI7_RXINTERVAL 0xffc03ff0 /* Sets the polling interval for Interrupt/Isochronous transfers or the NAK response timeout on Bulk transfers for Host Rx endpoint7 */
-#define USB_EP_NI7_TXCOUNT 0xffc03ff8 /* Number of bytes to be written to the endpoint7 Tx FIFO */
-#define USB_DMA_INTERRUPT 0xffc04000 /* Indicates pending interrupts for the DMA channels */
-
-/* USB Channel 0 Config Registers */
-
-#define USB_DMA0CONTROL 0xffc04004 /* DMA master channel 0 configuration */
-#define USB_DMA0ADDRLOW 0xffc04008 /* Lower 16-bits of memory source/destination address for DMA master channel 0 */
-#define USB_DMA0ADDRHIGH 0xffc0400c /* Upper 16-bits of memory source/destination address for DMA master channel 0 */
-#define USB_DMA0COUNTLOW 0xffc04010 /* Lower 16-bits of byte count of DMA transfer for DMA master channel 0 */
-#define USB_DMA0COUNTHIGH 0xffc04014 /* Upper 16-bits of byte count of DMA transfer for DMA master channel 0 */
-
-/* USB Channel 1 Config Registers */
-
-#define USB_DMA1CONTROL 0xffc04024 /* DMA master channel 1 configuration */
-#define USB_DMA1ADDRLOW 0xffc04028 /* Lower 16-bits of memory source/destination address for DMA master channel 1 */
-#define USB_DMA1ADDRHIGH 0xffc0402c /* Upper 16-bits of memory source/destination address for DMA master channel 1 */
-#define USB_DMA1COUNTLOW 0xffc04030 /* Lower 16-bits of byte count of DMA transfer for DMA master channel 1 */
-#define USB_DMA1COUNTHIGH 0xffc04034 /* Upper 16-bits of byte count of DMA transfer for DMA master channel 1 */
-
-/* USB Channel 2 Config Registers */
-
-#define USB_DMA2CONTROL 0xffc04044 /* DMA master channel 2 configuration */
-#define USB_DMA2ADDRLOW 0xffc04048 /* Lower 16-bits of memory source/destination address for DMA master channel 2 */
-#define USB_DMA2ADDRHIGH 0xffc0404c /* Upper 16-bits of memory source/destination address for DMA master channel 2 */
-#define USB_DMA2COUNTLOW 0xffc04050 /* Lower 16-bits of byte count of DMA transfer for DMA master channel 2 */
-#define USB_DMA2COUNTHIGH 0xffc04054 /* Upper 16-bits of byte count of DMA transfer for DMA master channel 2 */
-
-/* USB Channel 3 Config Registers */
-
-#define USB_DMA3CONTROL 0xffc04064 /* DMA master channel 3 configuration */
-#define USB_DMA3ADDRLOW 0xffc04068 /* Lower 16-bits of memory source/destination address for DMA master channel 3 */
-#define USB_DMA3ADDRHIGH 0xffc0406c /* Upper 16-bits of memory source/destination address for DMA master channel 3 */
-#define USB_DMA3COUNTLOW 0xffc04070 /* Lower 16-bits of byte count of DMA transfer for DMA master channel 3 */
-#define USB_DMA3COUNTHIGH 0xffc04074 /* Upper 16-bits of byte count of DMA transfer for DMA master channel 3 */
-
-/* USB Channel 4 Config Registers */
-
-#define USB_DMA4CONTROL 0xffc04084 /* DMA master channel 4 configuration */
-#define USB_DMA4ADDRLOW 0xffc04088 /* Lower 16-bits of memory source/destination address for DMA master channel 4 */
-#define USB_DMA4ADDRHIGH 0xffc0408c /* Upper 16-bits of memory source/destination address for DMA master channel 4 */
-#define USB_DMA4COUNTLOW 0xffc04090 /* Lower 16-bits of byte count of DMA transfer for DMA master channel 4 */
-#define USB_DMA4COUNTHIGH 0xffc04094 /* Upper 16-bits of byte count of DMA transfer for DMA master channel 4 */
-
-/* USB Channel 5 Config Registers */
-
-#define USB_DMA5CONTROL 0xffc040a4 /* DMA master channel 5 configuration */
-#define USB_DMA5ADDRLOW 0xffc040a8 /* Lower 16-bits of memory source/destination address for DMA master channel 5 */
-#define USB_DMA5ADDRHIGH 0xffc040ac /* Upper 16-bits of memory source/destination address for DMA master channel 5 */
-#define USB_DMA5COUNTLOW 0xffc040b0 /* Lower 16-bits of byte count of DMA transfer for DMA master channel 5 */
-#define USB_DMA5COUNTHIGH 0xffc040b4 /* Upper 16-bits of byte count of DMA transfer for DMA master channel 5 */
-
-/* USB Channel 6 Config Registers */
-
-#define USB_DMA6CONTROL 0xffc040c4 /* DMA master channel 6 configuration */
-#define USB_DMA6ADDRLOW 0xffc040c8 /* Lower 16-bits of memory source/destination address for DMA master channel 6 */
-#define USB_DMA6ADDRHIGH 0xffc040cc /* Upper 16-bits of memory source/destination address for DMA master channel 6 */
-#define USB_DMA6COUNTLOW 0xffc040d0 /* Lower 16-bits of byte count of DMA transfer for DMA master channel 6 */
-#define USB_DMA6COUNTHIGH 0xffc040d4 /* Upper 16-bits of byte count of DMA transfer for DMA master channel 6 */
-
-/* USB Channel 7 Config Registers */
-
-#define USB_DMA7CONTROL 0xffc040e4 /* DMA master channel 7 configuration */
-#define USB_DMA7ADDRLOW 0xffc040e8 /* Lower 16-bits of memory source/destination address for DMA master channel 7 */
-#define USB_DMA7ADDRHIGH 0xffc040ec /* Upper 16-bits of memory source/destination address for DMA master channel 7 */
-#define USB_DMA7COUNTLOW 0xffc040f0 /* Lower 16-bits of byte count of DMA transfer for DMA master channel 7 */
-#define USB_DMA7COUNTHIGH 0xffc040f4 /* Upper 16-bits of byte count of DMA transfer for DMA master channel 7 */
-
-/* Keypad Registers */
-
-#define KPAD_CTL 0xffc04100 /* Controls keypad module enable and disable */
-#define KPAD_PRESCALE 0xffc04104 /* Establish a time base for programing the KPAD_MSEL register */
-#define KPAD_MSEL 0xffc04108 /* Selects delay parameters for keypad interface sensitivity */
-#define KPAD_ROWCOL 0xffc0410c /* Captures the row and column output values of the keys pressed */
-#define KPAD_STAT 0xffc04110 /* Holds and clears the status of the keypad interface interrupt */
-#define KPAD_SOFTEVAL 0xffc04114 /* Lets software force keypad interface to check for keys being pressed */
-
-
-/* ********************************************************** */
-/* SINGLE BIT MACRO PAIRS (bit mask and negated one) */
-/* and MULTI BIT READ MACROS */
-/* ********************************************************** */
-
-/* Bit masks for KPAD_CTL */
-
-#define KPAD_EN 0x1 /* Keypad Enable */
-#define KPAD_IRQMODE 0x6 /* Key Press Interrupt Enable */
-#define KPAD_ROWEN 0x1c00 /* Row Enable Width */
-#define KPAD_COLEN 0xe000 /* Column Enable Width */
-
-/* Bit masks for KPAD_PRESCALE */
-
-#define KPAD_PRESCALE_VAL 0x3f /* Key Prescale Value */
-
-/* Bit masks for KPAD_MSEL */
-
-#define DBON_SCALE 0xff /* Debounce Scale Value */
-#define COLDRV_SCALE 0xff00 /* Column Driver Scale Value */
-
-/* Bit masks for KPAD_ROWCOL */
-
-#define KPAD_ROW 0xff /* Rows Pressed */
-#define KPAD_COL 0xff00 /* Columns Pressed */
-
-/* Bit masks for KPAD_STAT */
-
-#define KPAD_IRQ 0x1 /* Keypad Interrupt Status */
-#define KPAD_MROWCOL 0x6 /* Multiple Row/Column Keypress Status */
-#define KPAD_PRESSED 0x8 /* Key press current status */
-
-/* Bit masks for KPAD_SOFTEVAL */
-
-#define KPAD_SOFTEVAL_E 0x2 /* Software Programmable Force Evaluate */
-
-/* Bit masks for SDH_COMMAND */
-
-#define CMD_IDX 0x3f /* Command Index */
-#define CMD_RSP 0x40 /* Response */
-#define CMD_L_RSP 0x80 /* Long Response */
-#define CMD_INT_E 0x100 /* Command Interrupt */
-#define CMD_PEND_E 0x200 /* Command Pending */
-#define CMD_E 0x400 /* Command Enable */
-
-/* Bit masks for SDH_PWR_CTL */
-
-#define PWR_ON 0x3 /* Power On */
-#if 0
-#define TBD 0x3c /* TBD */
-#endif
-#define SD_CMD_OD 0x40 /* Open Drain Output */
-#define ROD_CTL 0x80 /* Rod Control */
-
-/* Bit masks for SDH_CLK_CTL */
-
-#define CLKDIV 0xff /* MC_CLK Divisor */
-#define CLK_E 0x100 /* MC_CLK Bus Clock Enable */
-#define PWR_SV_E 0x200 /* Power Save Enable */
-#define CLKDIV_BYPASS 0x400 /* Bypass Divisor */
-#define WIDE_BUS 0x800 /* Wide Bus Mode Enable */
-
-/* Bit masks for SDH_RESP_CMD */
-
-#define RESP_CMD 0x3f /* Response Command */
-
-/* Bit masks for SDH_DATA_CTL */
-
-#define DTX_E 0x1 /* Data Transfer Enable */
-#define DTX_DIR 0x2 /* Data Transfer Direction */
-#define DTX_MODE 0x4 /* Data Transfer Mode */
-#define DTX_DMA_E 0x8 /* Data Transfer DMA Enable */
-#define DTX_BLK_LGTH 0xf0 /* Data Transfer Block Length */
-
-/* Bit masks for SDH_STATUS */
-
-#define CMD_CRC_FAIL 0x1 /* CMD CRC Fail */
-#define DAT_CRC_FAIL 0x2 /* Data CRC Fail */
-#define CMD_TIME_OUT 0x4 /* CMD Time Out */
-#define DAT_TIME_OUT 0x8 /* Data Time Out */
-#define TX_UNDERRUN 0x10 /* Transmit Underrun */
-#define RX_OVERRUN 0x20 /* Receive Overrun */
-#define CMD_RESP_END 0x40 /* CMD Response End */
-#define CMD_SENT 0x80 /* CMD Sent */
-#define DAT_END 0x100 /* Data End */
-#define START_BIT_ERR 0x200 /* Start Bit Error */
-#define DAT_BLK_END 0x400 /* Data Block End */
-#define CMD_ACT 0x800 /* CMD Active */
-#define TX_ACT 0x1000 /* Transmit Active */
-#define RX_ACT 0x2000 /* Receive Active */
-#define TX_FIFO_STAT 0x4000 /* Transmit FIFO Status */
-#define RX_FIFO_STAT 0x8000 /* Receive FIFO Status */
-#define TX_FIFO_FULL 0x10000 /* Transmit FIFO Full */
-#define RX_FIFO_FULL 0x20000 /* Receive FIFO Full */
-#define TX_FIFO_ZERO 0x40000 /* Transmit FIFO Empty */
-#define RX_DAT_ZERO 0x80000 /* Receive FIFO Empty */
-#define TX_DAT_RDY 0x100000 /* Transmit Data Available */
-#define RX_FIFO_RDY 0x200000 /* Receive Data Available */
-
-/* Bit masks for SDH_STATUS_CLR */
-
-#define CMD_CRC_FAIL_STAT 0x1 /* CMD CRC Fail Status */
-#define DAT_CRC_FAIL_STAT 0x2 /* Data CRC Fail Status */
-#define CMD_TIMEOUT_STAT 0x4 /* CMD Time Out Status */
-#define DAT_TIMEOUT_STAT 0x8 /* Data Time Out status */
-#define TX_UNDERRUN_STAT 0x10 /* Transmit Underrun Status */
-#define RX_OVERRUN_STAT 0x20 /* Receive Overrun Status */
-#define CMD_RESP_END_STAT 0x40 /* CMD Response End Status */
-#define CMD_SENT_STAT 0x80 /* CMD Sent Status */
-#define DAT_END_STAT 0x100 /* Data End Status */
-#define START_BIT_ERR_STAT 0x200 /* Start Bit Error Status */
-#define DAT_BLK_END_STAT 0x400 /* Data Block End Status */
-
-/* Bit masks for SDH_MASK0 */
-
-#define CMD_CRC_FAIL_MASK 0x1 /* CMD CRC Fail Mask */
-#define DAT_CRC_FAIL_MASK 0x2 /* Data CRC Fail Mask */
-#define CMD_TIMEOUT_MASK 0x4 /* CMD Time Out Mask */
-#define DAT_TIMEOUT_MASK 0x8 /* Data Time Out Mask */
-#define TX_UNDERRUN_MASK 0x10 /* Transmit Underrun Mask */
-#define RX_OVERRUN_MASK 0x20 /* Receive Overrun Mask */
-#define CMD_RESP_END_MASK 0x40 /* CMD Response End Mask */
-#define CMD_SENT_MASK 0x80 /* CMD Sent Mask */
-#define DAT_END_MASK 0x100 /* Data End Mask */
-#define START_BIT_ERR_MASK 0x200 /* Start Bit Error Mask */
-#define DAT_BLK_END_MASK 0x400 /* Data Block End Mask */
-#define CMD_ACT_MASK 0x800 /* CMD Active Mask */
-#define TX_ACT_MASK 0x1000 /* Transmit Active Mask */
-#define RX_ACT_MASK 0x2000 /* Receive Active Mask */
-#define TX_FIFO_STAT_MASK 0x4000 /* Transmit FIFO Status Mask */
-#define RX_FIFO_STAT_MASK 0x8000 /* Receive FIFO Status Mask */
-#define TX_FIFO_FULL_MASK 0x10000 /* Transmit FIFO Full Mask */
-#define RX_FIFO_FULL_MASK 0x20000 /* Receive FIFO Full Mask */
-#define TX_FIFO_ZERO_MASK 0x40000 /* Transmit FIFO Empty Mask */
-#define RX_DAT_ZERO_MASK 0x80000 /* Receive FIFO Empty Mask */
-#define TX_DAT_RDY_MASK 0x100000 /* Transmit Data Available Mask */
-#define RX_FIFO_RDY_MASK 0x200000 /* Receive Data Available Mask */
-
-/* Bit masks for SDH_FIFO_CNT */
-
-#define FIFO_COUNT 0x7fff /* FIFO Count */
-
-/* Bit masks for SDH_E_STATUS */
-
-#define SDIO_INT_DET 0x2 /* SDIO Int Detected */
-#define SD_CARD_DET 0x10 /* SD Card Detect */
-
-/* Bit masks for SDH_E_MASK */
-
-#define SDIO_MSK 0x2 /* Mask SDIO Int Detected */
-#define SCD_MSK 0x40 /* Mask Card Detect */
-
-/* Bit masks for SDH_CFG */
-
-#define CLKS_EN 0x1 /* Clocks Enable */
-#define SD4E 0x4 /* SDIO 4-Bit Enable */
-#define MWE 0x8 /* Moving Window Enable */
-#define SD_RST 0x10 /* SDMMC Reset */
-#define PUP_SDDAT 0x20 /* Pull-up SD_DAT */
-#define PUP_SDDAT3 0x40 /* Pull-up SD_DAT3 */
-#define PD_SDDAT3 0x80 /* Pull-down SD_DAT3 */
-
-/* Bit masks for SDH_RD_WAIT_EN */
-
-#define RWR 0x1 /* Read Wait Request */
-
-/* Bit masks for ATAPI_CONTROL */
-
-#define PIO_START 0x1 /* Start PIO/Reg Op */
-#define MULTI_START 0x2 /* Start Multi-DMA Op */
-#define ULTRA_START 0x4 /* Start Ultra-DMA Op */
-#define XFER_DIR 0x8 /* Transfer Direction */
-#define IORDY_EN 0x10 /* IORDY Enable */
-#define FIFO_FLUSH 0x20 /* Flush FIFOs */
-#define SOFT_RST 0x40 /* Soft Reset */
-#define DEV_RST 0x80 /* Device Reset */
-#define TFRCNT_RST 0x100 /* Trans Count Reset */
-#define END_ON_TERM 0x200 /* End/Terminate Select */
-#define PIO_USE_DMA 0x400 /* PIO-DMA Enable */
-#define UDMAIN_FIFO_THRS 0xf000 /* Ultra DMA-IN FIFO Threshold */
-
-/* Bit masks for ATAPI_STATUS */
-
-#define PIO_XFER_ON 0x1 /* PIO transfer in progress */
-#define MULTI_XFER_ON 0x2 /* Multi-word DMA transfer in progress */
-#define ULTRA_XFER_ON 0x4 /* Ultra DMA transfer in progress */
-#define ULTRA_IN_FL 0xf0 /* Ultra DMA Input FIFO Level */
-
-/* Bit masks for ATAPI_DEV_ADDR */
-
-#define DEV_ADDR 0x1f /* Device Address */
-
-/* Bit masks for ATAPI_INT_MASK */
-
-#define ATAPI_DEV_INT_MASK 0x1 /* Device interrupt mask */
-#define PIO_DONE_MASK 0x2 /* PIO transfer done interrupt mask */
-#define MULTI_DONE_MASK 0x4 /* Multi-DMA transfer done interrupt mask */
-#define UDMAIN_DONE_MASK 0x8 /* Ultra-DMA in transfer done interrupt mask */
-#define UDMAOUT_DONE_MASK 0x10 /* Ultra-DMA out transfer done interrupt mask */
-#define HOST_TERM_XFER_MASK 0x20 /* Host terminate current transfer interrupt mask */
-#define MULTI_TERM_MASK 0x40 /* Device terminate Multi-DMA transfer interrupt mask */
-#define UDMAIN_TERM_MASK 0x80 /* Device terminate Ultra-DMA-in transfer interrupt mask */
-#define UDMAOUT_TERM_MASK 0x100 /* Device terminate Ultra-DMA-out transfer interrupt mask */
-
-/* Bit masks for ATAPI_INT_STATUS */
-
-#define ATAPI_DEV_INT 0x1 /* Device interrupt status */
-#define PIO_DONE_INT 0x2 /* PIO transfer done interrupt status */
-#define MULTI_DONE_INT 0x4 /* Multi-DMA transfer done interrupt status */
-#define UDMAIN_DONE_INT 0x8 /* Ultra-DMA in transfer done interrupt status */
-#define UDMAOUT_DONE_INT 0x10 /* Ultra-DMA out transfer done interrupt status */
-#define HOST_TERM_XFER_INT 0x20 /* Host terminate current transfer interrupt status */
-#define MULTI_TERM_INT 0x40 /* Device terminate Multi-DMA transfer interrupt status */
-#define UDMAIN_TERM_INT 0x80 /* Device terminate Ultra-DMA-in transfer interrupt status */
-#define UDMAOUT_TERM_INT 0x100 /* Device terminate Ultra-DMA-out transfer interrupt status */
-
-/* Bit masks for ATAPI_LINE_STATUS */
-
-#define ATAPI_INTR 0x1 /* Device interrupt to host line status */
-#define ATAPI_DASP 0x2 /* Device dasp to host line status */
-#define ATAPI_CS0N 0x4 /* ATAPI chip select 0 line status */
-#define ATAPI_CS1N 0x8 /* ATAPI chip select 1 line status */
-#define ATAPI_ADDR 0x70 /* ATAPI address line status */
-#define ATAPI_DMAREQ 0x80 /* ATAPI DMA request line status */
-#define ATAPI_DMAACKN 0x100 /* ATAPI DMA acknowledge line status */
-#define ATAPI_DIOWN 0x200 /* ATAPI write line status */
-#define ATAPI_DIORN 0x400 /* ATAPI read line status */
-#define ATAPI_IORDY 0x800 /* ATAPI IORDY line status */
-
-/* Bit masks for ATAPI_SM_STATE */
-
-#define PIO_CSTATE 0xf /* PIO mode state machine current state */
-#define DMA_CSTATE 0xf0 /* DMA mode state machine current state */
-#define UDMAIN_CSTATE 0xf00 /* Ultra DMA-In mode state machine current state */
-#define UDMAOUT_CSTATE 0xf000 /* ATAPI IORDY line status */
-
-/* Bit masks for ATAPI_TERMINATE */
-
-#define ATAPI_HOST_TERM 0x1 /* Host terminationation */
-
-/* Bit masks for ATAPI_REG_TIM_0 */
-
-#define T2_REG 0xff /* End of cycle time for register access transfers */
-#define TEOC_REG 0xff00 /* Selects DIOR/DIOW pulsewidth */
-
-/* Bit masks for ATAPI_PIO_TIM_0 */
-
-#define T1_REG 0xf /* Time from address valid to DIOR/DIOW */
-#define T2_REG_PIO 0xff0 /* DIOR/DIOW pulsewidth */
-#define T4_REG 0xf000 /* DIOW data hold */
-
-/* Bit masks for ATAPI_PIO_TIM_1 */
-
-#define TEOC_REG_PIO 0xff /* End of cycle time for PIO access transfers. */
-
-/* Bit masks for ATAPI_MULTI_TIM_0 */
-
-#define TD 0xff /* DIOR/DIOW asserted pulsewidth */
-#define TM 0xff00 /* Time from address valid to DIOR/DIOW */
-
-/* Bit masks for ATAPI_MULTI_TIM_1 */
-
-#define TKW 0xff /* Selects DIOW negated pulsewidth */
-#define TKR 0xff00 /* Selects DIOR negated pulsewidth */
-
-/* Bit masks for ATAPI_MULTI_TIM_2 */
-
-#define TH 0xff /* Selects DIOW data hold */
-#define TEOC 0xff00 /* Selects end of cycle for DMA */
-
-/* Bit masks for ATAPI_ULTRA_TIM_0 */
-
-#define TACK 0xff /* Selects setup and hold times for TACK */
-#define TENV 0xff00 /* Selects envelope time */
-
-/* Bit masks for ATAPI_ULTRA_TIM_1 */
-
-#define TDVS 0xff /* Selects data valid setup time */
-#define TCYC_TDVS 0xff00 /* Selects cycle time - TDVS time */
-
-/* Bit masks for ATAPI_ULTRA_TIM_2 */
-
-#define TSS 0xff /* Selects time from STROBE edge to negation of DMARQ or assertion of STOP */
-#define TMLI 0xff00 /* Selects interlock time */
-
-/* Bit masks for ATAPI_ULTRA_TIM_3 */
-
-#define TZAH 0xff /* Selects minimum delay required for output */
-#define READY_PAUSE 0xff00 /* Selects ready to pause */
-
-/* Bit masks for USB_FADDR */
-
-#define FUNCTION_ADDRESS 0x7f /* Function address */
-
-/* Bit masks for USB_POWER */
-
-#define ENABLE_SUSPENDM 0x1 /* enable SuspendM output */
-#define SUSPEND_MODE 0x2 /* Suspend Mode indicator */
-#define RESUME_MODE 0x4 /* DMA Mode */
-#define RESET 0x8 /* Reset indicator */
-#define HS_MODE 0x10 /* High Speed mode indicator */
-#define HS_ENABLE 0x20 /* high Speed Enable */
-#define SOFT_CONN 0x40 /* Soft connect */
-#define ISO_UPDATE 0x80 /* Isochronous update */
-
-/* Bit masks for USB_INTRTX */
-
-#define EP0_TX 0x1 /* Tx Endpoint 0 interrupt */
-#define EP1_TX 0x2 /* Tx Endpoint 1 interrupt */
-#define EP2_TX 0x4 /* Tx Endpoint 2 interrupt */
-#define EP3_TX 0x8 /* Tx Endpoint 3 interrupt */
-#define EP4_TX 0x10 /* Tx Endpoint 4 interrupt */
-#define EP5_TX 0x20 /* Tx Endpoint 5 interrupt */
-#define EP6_TX 0x40 /* Tx Endpoint 6 interrupt */
-#define EP7_TX 0x80 /* Tx Endpoint 7 interrupt */
-
-/* Bit masks for USB_INTRRX */
-
-#define EP1_RX 0x2 /* Rx Endpoint 1 interrupt */
-#define EP2_RX 0x4 /* Rx Endpoint 2 interrupt */
-#define EP3_RX 0x8 /* Rx Endpoint 3 interrupt */
-#define EP4_RX 0x10 /* Rx Endpoint 4 interrupt */
-#define EP5_RX 0x20 /* Rx Endpoint 5 interrupt */
-#define EP6_RX 0x40 /* Rx Endpoint 6 interrupt */
-#define EP7_RX 0x80 /* Rx Endpoint 7 interrupt */
-
-/* Bit masks for USB_INTRTXE */
-
-#define EP0_TX_E 0x1 /* Endpoint 0 interrupt Enable */
-#define EP1_TX_E 0x2 /* Tx Endpoint 1 interrupt Enable */
-#define EP2_TX_E 0x4 /* Tx Endpoint 2 interrupt Enable */
-#define EP3_TX_E 0x8 /* Tx Endpoint 3 interrupt Enable */
-#define EP4_TX_E 0x10 /* Tx Endpoint 4 interrupt Enable */
-#define EP5_TX_E 0x20 /* Tx Endpoint 5 interrupt Enable */
-#define EP6_TX_E 0x40 /* Tx Endpoint 6 interrupt Enable */
-#define EP7_TX_E 0x80 /* Tx Endpoint 7 interrupt Enable */
-
-/* Bit masks for USB_INTRRXE */
-
-#define EP1_RX_E 0x2 /* Rx Endpoint 1 interrupt Enable */
-#define EP2_RX_E 0x4 /* Rx Endpoint 2 interrupt Enable */
-#define EP3_RX_E 0x8 /* Rx Endpoint 3 interrupt Enable */
-#define EP4_RX_E 0x10 /* Rx Endpoint 4 interrupt Enable */
-#define EP5_RX_E 0x20 /* Rx Endpoint 5 interrupt Enable */
-#define EP6_RX_E 0x40 /* Rx Endpoint 6 interrupt Enable */
-#define EP7_RX_E 0x80 /* Rx Endpoint 7 interrupt Enable */
-
-/* Bit masks for USB_INTRUSB */
-
-#define SUSPEND_B 0x1 /* Suspend indicator */
-#define RESUME_B 0x2 /* Resume indicator */
-#define RESET_OR_BABLE_B 0x4 /* Reset/babble indicator */
-#define SOF_B 0x8 /* Start of frame */
-#define CONN_B 0x10 /* Connection indicator */
-#define DISCON_B 0x20 /* Disconnect indicator */
-#define SESSION_REQ_B 0x40 /* Session Request */
-#define VBUS_ERROR_B 0x80 /* Vbus threshold indicator */
-
-/* Bit masks for USB_INTRUSBE */
-
-#define SUSPEND_BE 0x1 /* Suspend indicator int enable */
-#define RESUME_BE 0x2 /* Resume indicator int enable */
-#define RESET_OR_BABLE_BE 0x4 /* Reset/babble indicator int enable */
-#define SOF_BE 0x8 /* Start of frame int enable */
-#define CONN_BE 0x10 /* Connection indicator int enable */
-#define DISCON_BE 0x20 /* Disconnect indicator int enable */
-#define SESSION_REQ_BE 0x40 /* Session Request int enable */
-#define VBUS_ERROR_BE 0x80 /* Vbus threshold indicator int enable */
-
-/* Bit masks for USB_FRAME */
-
-#define FRAME_NUMBER 0x7ff /* Frame number */
-
-/* Bit masks for USB_INDEX */
-
-#define SELECTED_ENDPOINT 0xf /* selected endpoint */
-
-/* Bit masks for USB_GLOBAL_CTL */
-
-#define GLOBAL_ENA 0x1 /* enables USB module */
-#define EP1_TX_ENA 0x2 /* Transmit endpoint 1 enable */
-#define EP2_TX_ENA 0x4 /* Transmit endpoint 2 enable */
-#define EP3_TX_ENA 0x8 /* Transmit endpoint 3 enable */
-#define EP4_TX_ENA 0x10 /* Transmit endpoint 4 enable */
-#define EP5_TX_ENA 0x20 /* Transmit endpoint 5 enable */
-#define EP6_TX_ENA 0x40 /* Transmit endpoint 6 enable */
-#define EP7_TX_ENA 0x80 /* Transmit endpoint 7 enable */
-#define EP1_RX_ENA 0x100 /* Receive endpoint 1 enable */
-#define EP2_RX_ENA 0x200 /* Receive endpoint 2 enable */
-#define EP3_RX_ENA 0x400 /* Receive endpoint 3 enable */
-#define EP4_RX_ENA 0x800 /* Receive endpoint 4 enable */
-#define EP5_RX_ENA 0x1000 /* Receive endpoint 5 enable */
-#define EP6_RX_ENA 0x2000 /* Receive endpoint 6 enable */
-#define EP7_RX_ENA 0x4000 /* Receive endpoint 7 enable */
-
-/* Bit masks for USB_OTG_DEV_CTL */
-
-#define SESSION 0x1 /* session indicator */
-#define HOST_REQ 0x2 /* Host negotiation request */
-#define HOST_MODE 0x4 /* indicates USBDRC is a host */
-#define VBUS0 0x8 /* Vbus level indicator[0] */
-#define VBUS1 0x10 /* Vbus level indicator[1] */
-#define LSDEV 0x20 /* Low-speed indicator */
-#define FSDEV 0x40 /* Full or High-speed indicator */
-#define B_DEVICE 0x80 /* A' or 'B' device indicator */
-
-/* Bit masks for USB_OTG_VBUS_IRQ */
-
-#define DRIVE_VBUS_ON 0x1 /* indicator to drive VBUS control circuit */
-#define DRIVE_VBUS_OFF 0x2 /* indicator to shut off charge pump */
-#define CHRG_VBUS_START 0x4 /* indicator for external circuit to start charging VBUS */
-#define CHRG_VBUS_END 0x8 /* indicator for external circuit to end charging VBUS */
-#define DISCHRG_VBUS_START 0x10 /* indicator to start discharging VBUS */
-#define DISCHRG_VBUS_END 0x20 /* indicator to stop discharging VBUS */
-
-/* Bit masks for USB_OTG_VBUS_MASK */
-
-#define DRIVE_VBUS_ON_ENA 0x1 /* enable DRIVE_VBUS_ON interrupt */
-#define DRIVE_VBUS_OFF_ENA 0x2 /* enable DRIVE_VBUS_OFF interrupt */
-#define CHRG_VBUS_START_ENA 0x4 /* enable CHRG_VBUS_START interrupt */
-#define CHRG_VBUS_END_ENA 0x8 /* enable CHRG_VBUS_END interrupt */
-#define DISCHRG_VBUS_START_ENA 0x10 /* enable DISCHRG_VBUS_START interrupt */
-#define DISCHRG_VBUS_END_ENA 0x20 /* enable DISCHRG_VBUS_END interrupt */
-
-/* Bit masks for USB_CSR0 */
-
-#define RXPKTRDY 0x1 /* data packet receive indicator */
-#define TXPKTRDY 0x2 /* data packet in FIFO indicator */
-#define STALL_SENT 0x4 /* STALL handshake sent */
-#define DATAEND 0x8 /* Data end indicator */
-#define SETUPEND 0x10 /* Setup end */
-#define SENDSTALL 0x20 /* Send STALL handshake */
-#define SERVICED_RXPKTRDY 0x40 /* used to clear the RxPktRdy bit */
-#define SERVICED_SETUPEND 0x80 /* used to clear the SetupEnd bit */
-#define FLUSHFIFO 0x100 /* flush endpoint FIFO */
-#define STALL_RECEIVED_H 0x4 /* STALL handshake received host mode */
-#define SETUPPKT_H 0x8 /* send Setup token host mode */
-#define ERROR_H 0x10 /* timeout error indicator host mode */
-#define REQPKT_H 0x20 /* Request an IN transaction host mode */
-#define STATUSPKT_H 0x40 /* Status stage transaction host mode */
-#define NAK_TIMEOUT_H 0x80 /* EP0 halted after a NAK host mode */
-
-/* Bit masks for USB_COUNT0 */
-
-#define EP0_RX_COUNT 0x7f /* number of received bytes in EP0 FIFO */
-
-/* Bit masks for USB_NAKLIMIT0 */
-
-#define EP0_NAK_LIMIT 0x1f /* number of frames/micro frames after which EP0 timeouts */
-
-/* Bit masks for USB_TX_MAX_PACKET */
-
-#define MAX_PACKET_SIZE_T 0x7ff /* maximum data pay load in a frame */
-
-/* Bit masks for USB_RX_MAX_PACKET */
-
-#define MAX_PACKET_SIZE_R 0x7ff /* maximum data pay load in a frame */
-
-/* Bit masks for USB_TXCSR */
-
-#define TXPKTRDY_T 0x1 /* data packet in FIFO indicator */
-#define FIFO_NOT_EMPTY_T 0x2 /* FIFO not empty */
-#define UNDERRUN_T 0x4 /* TxPktRdy not set for an IN token */
-#define FLUSHFIFO_T 0x8 /* flush endpoint FIFO */
-#define STALL_SEND_T 0x10 /* issue a Stall handshake */
-#define STALL_SENT_T 0x20 /* Stall handshake transmitted */
-#define CLEAR_DATATOGGLE_T 0x40 /* clear endpoint data toggle */
-#define INCOMPTX_T 0x80 /* indicates that a large packet is split */
-#define DMAREQMODE_T 0x400 /* DMA mode (0 or 1) selection */
-#define FORCE_DATATOGGLE_T 0x800 /* Force data toggle */
-#define DMAREQ_ENA_T 0x1000 /* Enable DMA request for Tx EP */
-#define ISO_T 0x4000 /* enable Isochronous transfers */
-#define AUTOSET_T 0x8000 /* allows TxPktRdy to be set automatically */
-#define ERROR_TH 0x4 /* error condition host mode */
-#define STALL_RECEIVED_TH 0x20 /* Stall handshake received host mode */
-#define NAK_TIMEOUT_TH 0x80 /* NAK timeout host mode */
-
-/* Bit masks for USB_TXCOUNT */
-
-#define TX_COUNT 0x1fff /* Number of bytes to be written to the selected endpoint Tx FIFO */
-
-/* Bit masks for USB_RXCSR */
-
-#define RXPKTRDY_R 0x1 /* data packet in FIFO indicator */
-#define FIFO_FULL_R 0x2 /* FIFO not empty */
-#define OVERRUN_R 0x4 /* TxPktRdy not set for an IN token */
-#define DATAERROR_R 0x8 /* Out packet cannot be loaded into Rx FIFO */
-#define FLUSHFIFO_R 0x10 /* flush endpoint FIFO */
-#define STALL_SEND_R 0x20 /* issue a Stall handshake */
-#define STALL_SENT_R 0x40 /* Stall handshake transmitted */
-#define CLEAR_DATATOGGLE_R 0x80 /* clear endpoint data toggle */
-#define INCOMPRX_R 0x100 /* indicates that a large packet is split */
-#define DMAREQMODE_R 0x800 /* DMA mode (0 or 1) selection */
-#define DISNYET_R 0x1000 /* disable Nyet handshakes */
-#define DMAREQ_ENA_R 0x2000 /* Enable DMA request for Tx EP */
-#define ISO_R 0x4000 /* enable Isochronous transfers */
-#define AUTOCLEAR_R 0x8000 /* allows TxPktRdy to be set automatically */
-#define ERROR_RH 0x4 /* TxPktRdy not set for an IN token host mode */
-#define REQPKT_RH 0x20 /* request an IN transaction host mode */
-#define STALL_RECEIVED_RH 0x40 /* Stall handshake received host mode */
-#define INCOMPRX_RH 0x100 /* indicates that a large packet is split host mode */
-#define DMAREQMODE_RH 0x800 /* DMA mode (0 or 1) selection host mode */
-#define AUTOREQ_RH 0x4000 /* sets ReqPkt automatically host mode */
-
-/* Bit masks for USB_RXCOUNT */
-
-#define RX_COUNT 0x1fff /* Number of received bytes in the packet in the Rx FIFO */
-
-/* Bit masks for USB_TXTYPE */
-
-#define TARGET_EP_NO_T 0xf /* EP number */
-#define PROTOCOL_T 0xc /* transfer type */
-
-/* Bit masks for USB_TXINTERVAL */
-
-#define TX_POLL_INTERVAL 0xff /* polling interval for selected Tx EP */
-
-/* Bit masks for USB_RXTYPE */
-
-#define TARGET_EP_NO_R 0xf /* EP number */
-#define PROTOCOL_R 0xc /* transfer type */
-
-/* Bit masks for USB_RXINTERVAL */
-
-#define RX_POLL_INTERVAL 0xff /* polling interval for selected Rx EP */
-
-/* Bit masks for USB_DMA_INTERRUPT */
-
-#define DMA0_INT 0x1 /* DMA0 pending interrupt */
-#define DMA1_INT 0x2 /* DMA1 pending interrupt */
-#define DMA2_INT 0x4 /* DMA2 pending interrupt */
-#define DMA3_INT 0x8 /* DMA3 pending interrupt */
-#define DMA4_INT 0x10 /* DMA4 pending interrupt */
-#define DMA5_INT 0x20 /* DMA5 pending interrupt */
-#define DMA6_INT 0x40 /* DMA6 pending interrupt */
-#define DMA7_INT 0x80 /* DMA7 pending interrupt */
-
-/* Bit masks for USB_DMAxCONTROL */
-
-#define DMA_ENA 0x1 /* DMA enable */
-#define DIRECTION 0x2 /* direction of DMA transfer */
-#define MODE 0x4 /* DMA Bus error */
-#define INT_ENA 0x8 /* Interrupt enable */
-#define EPNUM 0xf0 /* EP number */
-#define BUSERROR 0x100 /* DMA Bus error */
-
-/* Bit masks for USB_DMAxADDRHIGH */
-
-#define DMA_ADDR_HIGH 0xffff /* Upper 16-bits of memory source/destination address for the DMA master channel */
-
-/* Bit masks for USB_DMAxADDRLOW */
-
-#define DMA_ADDR_LOW 0xffff /* Lower 16-bits of memory source/destination address for the DMA master channel */
-
-/* Bit masks for USB_DMAxCOUNTHIGH */
-
-#define DMA_COUNT_HIGH 0xffff /* Upper 16-bits of byte count of DMA transfer for DMA master channel */
-
-/* Bit masks for USB_DMAxCOUNTLOW */
-
-#define DMA_COUNT_LOW 0xffff /* Lower 16-bits of byte count of DMA transfer for DMA master channel */
-
-
-/* ******************************************* */
-/* MULTI BIT MACRO ENUMERATIONS */
-/* ******************************************* */
-
-
-#endif /* _DEF_BF542_H */