aboutsummaryrefslogtreecommitdiff
path: root/include/asm-mips/sn/sn0/addrs.h
diff options
context:
space:
mode:
Diffstat (limited to 'include/asm-mips/sn/sn0/addrs.h')
-rw-r--r--include/asm-mips/sn/sn0/addrs.h364
1 files changed, 364 insertions, 0 deletions
diff --git a/include/asm-mips/sn/sn0/addrs.h b/include/asm-mips/sn/sn0/addrs.h
new file mode 100644
index 00000000000..398815639fb
--- /dev/null
+++ b/include/asm-mips/sn/sn0/addrs.h
@@ -0,0 +1,364 @@
+/*
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License. See the file "COPYING" in the main directory of this archive
+ * for more details.
+ *
+ * Derived from IRIX <sys/SN/SN0/addrs.h>, revision 1.126.
+ *
+ * Copyright (C) 1992 - 1997, 1999 Silicon Graphics, Inc.
+ * Copyright (C) 1999 by Ralf Baechle
+ */
+#ifndef _ASM_SN_SN0_ADDRS_H
+#define _ASM_SN_SN0_ADDRS_H
+
+#include <linux/config.h>
+
+/*
+ * SN0 (on a T5) Address map
+ *
+ * This file contains a set of definitions and macros which are used
+ * to reference into the major address spaces (CAC, HSPEC, IO, MSPEC,
+ * and UNCAC) used by the SN0 architecture. It also contains addresses
+ * for "major" statically locatable PROM/Kernel data structures, such as
+ * the partition table, the configuration data structure, etc.
+ * We make an implicit assumption that the processor using this file
+ * follows the R10K's provisions for specifying uncached attributes;
+ * should this change, the base registers may very well become processor-
+ * dependent.
+ *
+ * For more information on the address spaces, see the "Local Resources"
+ * chapter of the Hub specification.
+ *
+ * NOTE: This header file is included both by C and by assembler source
+ * files. Please bracket any language-dependent definitions
+ * appropriately.
+ */
+
+/*
+ * Some of the macros here need to be casted to appropriate types when used
+ * from C. They definitely must not be casted from assembly language so we
+ * use some new ANSI preprocessor stuff to paste these on where needed.
+ */
+
+/*
+ * The following couple of definitions will eventually need to be variables,
+ * since the amount of address space assigned to each node depends on
+ * whether the system is running in N-mode (more nodes with less memory)
+ * or M-mode (fewer nodes with more memory). We expect that it will
+ * be a while before we need to make this decision dynamically, though,
+ * so for now we just use defines bracketed by an ifdef.
+ */
+
+#ifdef CONFIG_SGI_SN0_N_MODE
+
+#define NODE_SIZE_BITS 31
+#define BWIN_SIZE_BITS 28
+
+#define NASID_BITS 9
+#define NASID_BITMASK (0x1ffLL)
+#define NASID_SHFT 31
+#define NASID_META_BITS 5
+#define NASID_LOCAL_BITS 4
+
+#define BDDIR_UPPER_MASK (UINT64_CAST 0x7ffff << 10)
+#define BDECC_UPPER_MASK (UINT64_CAST 0x3ffffff << 3)
+
+#else /* !defined(CONFIG_SGI_SN0_N_MODE), assume that M-mode is desired */
+
+#define NODE_SIZE_BITS 32
+#define BWIN_SIZE_BITS 29
+
+#define NASID_BITMASK (0xffLL)
+#define NASID_BITS 8
+#define NASID_SHFT 32
+#define NASID_META_BITS 4
+#define NASID_LOCAL_BITS 4
+
+#define BDDIR_UPPER_MASK (UINT64_CAST 0xfffff << 10)
+#define BDECC_UPPER_MASK (UINT64_CAST 0x7ffffff << 3)
+
+#endif /* !defined(CONFIG_SGI_SN0_N_MODE) */
+
+#define NODE_ADDRSPACE_SIZE (UINT64_CAST 1 << NODE_SIZE_BITS)
+
+#define NASID_MASK (UINT64_CAST NASID_BITMASK << NASID_SHFT)
+#define NASID_GET(_pa) (int) ((UINT64_CAST (_pa) >> \
+ NASID_SHFT) & NASID_BITMASK)
+
+#if !defined(__ASSEMBLY__) && !defined(_STANDALONE)
+
+#define NODE_SWIN_BASE(nasid, widget) \
+ ((widget == 0) ? NODE_BWIN_BASE((nasid), SWIN0_BIGWIN) \
+ : RAW_NODE_SWIN_BASE(nasid, widget))
+#else /* __ASSEMBLY__ || _STANDALONE */
+#define NODE_SWIN_BASE(nasid, widget) \
+ (NODE_IO_BASE(nasid) + (UINT64_CAST (widget) << SWIN_SIZE_BITS))
+#endif /* __ASSEMBLY__ || _STANDALONE */
+
+/*
+ * The following definitions pertain to the IO special address
+ * space. They define the location of the big and little windows
+ * of any given node.
+ */
+
+#define BWIN_INDEX_BITS 3
+#define BWIN_SIZE (UINT64_CAST 1 << BWIN_SIZE_BITS)
+#define BWIN_SIZEMASK (BWIN_SIZE - 1)
+#define BWIN_WIDGET_MASK 0x7
+#define NODE_BWIN_BASE0(nasid) (NODE_IO_BASE(nasid) + BWIN_SIZE)
+#define NODE_BWIN_BASE(nasid, bigwin) (NODE_BWIN_BASE0(nasid) + \
+ (UINT64_CAST (bigwin) << BWIN_SIZE_BITS))
+
+#define BWIN_WIDGETADDR(addr) ((addr) & BWIN_SIZEMASK)
+#define BWIN_WINDOWNUM(addr) (((addr) >> BWIN_SIZE_BITS) & BWIN_WIDGET_MASK)
+/*
+ * Verify if addr belongs to large window address of node with "nasid"
+ *
+ *
+ * NOTE: "addr" is expected to be XKPHYS address, and NOT physical
+ * address
+ *
+ *
+ */
+
+#define NODE_BWIN_ADDR(nasid, addr) \
+ (((addr) >= NODE_BWIN_BASE0(nasid)) && \
+ ((addr) < (NODE_BWIN_BASE(nasid, HUB_NUM_BIG_WINDOW) + \
+ BWIN_SIZE)))
+
+/*
+ * The following define the major position-independent aliases used
+ * in SN0.
+ * CALIAS -- Varies in size, points to the first n bytes of memory
+ * on the reader's node.
+ */
+
+#define CALIAS_BASE CAC_BASE
+
+
+
+#define BRIDGE_REG_PTR(_base, _off) ((volatile bridgereg_t *) \
+ ((__psunsigned_t)(_base) + (__psunsigned_t)(_off)))
+
+#define SN0_WIDGET_BASE(_nasid, _wid) (NODE_SWIN_BASE((_nasid), (_wid)))
+
+/* Turn on sable logging for the processors whose bits are set. */
+#ifdef SABLE
+#define SABLE_LOG_TRIGGER(_map) \
+ *((volatile hubreg_t *)(IO_BASE + 0x17ffff0)) = (_map)
+#else
+#define SABLE_LOG_TRIGGER(_map)
+#endif /* SABLE */
+
+#ifndef __ASSEMBLY__
+#define KERN_NMI_ADDR(nasid, slice) \
+ TO_NODE_UNCAC((nasid), IP27_NMI_KREGS_OFFSET + \
+ (IP27_NMI_KREGS_CPU_SIZE * (slice)))
+#endif /* !__ASSEMBLY__ */
+
+#ifdef PROM
+
+#define MISC_PROM_BASE PHYS_TO_K0(0x01300000)
+#define MISC_PROM_SIZE 0x200000
+
+#define DIAG_BASE PHYS_TO_K0(0x01500000)
+#define DIAG_SIZE 0x300000
+
+#define ROUTE_BASE PHYS_TO_K0(0x01800000)
+#define ROUTE_SIZE 0x200000
+
+#define IP27PROM_FLASH_HDR PHYS_TO_K0(0x01300000)
+#define IP27PROM_FLASH_DATA PHYS_TO_K0(0x01301000)
+#define IP27PROM_CORP_MAX 32
+#define IP27PROM_CORP PHYS_TO_K0(0x01800000)
+#define IP27PROM_CORP_SIZE 0x10000
+#define IP27PROM_CORP_STK PHYS_TO_K0(0x01810000)
+#define IP27PROM_CORP_STKSIZE 0x2000
+#define IP27PROM_DECOMP_BUF PHYS_TO_K0(0x01900000)
+#define IP27PROM_DECOMP_SIZE 0xfff00
+
+#define IP27PROM_BASE PHYS_TO_K0(0x01a00000)
+#define IP27PROM_BASE_MAPPED (UNCAC_BASE | 0x1fc00000)
+#define IP27PROM_SIZE_MAX 0x100000
+
+#define IP27PROM_PCFG PHYS_TO_K0(0x01b00000)
+#define IP27PROM_PCFG_SIZE 0xd0000
+#define IP27PROM_ERRDMP PHYS_TO_K1(0x01bd0000)
+#define IP27PROM_ERRDMP_SIZE 0xf000
+
+#define IP27PROM_INIT_START PHYS_TO_K1(0x01bd0000)
+#define IP27PROM_CONSOLE PHYS_TO_K1(0x01bdf000)
+#define IP27PROM_CONSOLE_SIZE 0x200
+#define IP27PROM_NETUART PHYS_TO_K1(0x01bdf200)
+#define IP27PROM_NETUART_SIZE 0x100
+#define IP27PROM_UNUSED1 PHYS_TO_K1(0x01bdf300)
+#define IP27PROM_UNUSED1_SIZE 0x500
+#define IP27PROM_ELSC_BASE_A PHYS_TO_K0(0x01bdf800)
+#define IP27PROM_ELSC_BASE_B PHYS_TO_K0(0x01bdfc00)
+#define IP27PROM_STACK_A PHYS_TO_K0(0x01be0000)
+#define IP27PROM_STACK_B PHYS_TO_K0(0x01bf0000)
+#define IP27PROM_STACK_SHFT 16
+#define IP27PROM_STACK_SIZE (1 << IP27PROM_STACK_SHFT)
+#define IP27PROM_INIT_END PHYS_TO_K0(0x01c00000)
+
+#define SLAVESTACK_BASE PHYS_TO_K0(0x01580000)
+#define SLAVESTACK_SIZE 0x40000
+
+#define ENETBUFS_BASE PHYS_TO_K0(0x01f80000)
+#define ENETBUFS_SIZE 0x20000
+
+#define IO6PROM_BASE PHYS_TO_K0(0x01c00000)
+#define IO6PROM_SIZE 0x400000
+#define IO6PROM_BASE_MAPPED (UNCAC_BASE | 0x11c00000)
+#define IO6DPROM_BASE PHYS_TO_K0(0x01c00000)
+#define IO6DPROM_SIZE 0x200000
+
+#define NODEBUGUNIX_ADDR PHYS_TO_K0(0x00019000)
+#define DEBUGUNIX_ADDR PHYS_TO_K0(0x00100000)
+
+#define IP27PROM_INT_LAUNCH 10 /* and 11 */
+#define IP27PROM_INT_NETUART 12 /* through 17 */
+
+#endif /* PROM */
+
+/*
+ * needed by symmon so it needs to be outside #if PROM
+ */
+#define IP27PROM_ELSC_SHFT 10
+#define IP27PROM_ELSC_SIZE (1 << IP27PROM_ELSC_SHFT)
+
+/*
+ * This address is used by IO6PROM to build MemoryDescriptors of
+ * free memory. This address is important since unix gets loaded
+ * at this address, and this memory has to be FREE if unix is to
+ * be loaded.
+ */
+
+#define FREEMEM_BASE PHYS_TO_K0(0x2000000)
+
+#define IO6PROM_STACK_SHFT 14 /* stack per cpu */
+#define IO6PROM_STACK_SIZE (1 << IO6PROM_STACK_SHFT)
+
+/*
+ * IP27 PROM vectors
+ */
+
+#define IP27PROM_ENTRY PHYS_TO_COMPATK1(0x1fc00000)
+#define IP27PROM_RESTART PHYS_TO_COMPATK1(0x1fc00008)
+#define IP27PROM_SLAVELOOP PHYS_TO_COMPATK1(0x1fc00010)
+#define IP27PROM_PODMODE PHYS_TO_COMPATK1(0x1fc00018)
+#define IP27PROM_IOC3UARTPOD PHYS_TO_COMPATK1(0x1fc00020)
+#define IP27PROM_FLASHLEDS PHYS_TO_COMPATK1(0x1fc00028)
+#define IP27PROM_REPOD PHYS_TO_COMPATK1(0x1fc00030)
+#define IP27PROM_LAUNCHSLAVE PHYS_TO_COMPATK1(0x1fc00038)
+#define IP27PROM_WAITSLAVE PHYS_TO_COMPATK1(0x1fc00040)
+#define IP27PROM_POLLSLAVE PHYS_TO_COMPATK1(0x1fc00048)
+
+#define KL_UART_BASE LOCAL_HUB_ADDR(MD_UREG0_0) /* base of UART regs */
+#define KL_UART_CMD LOCAL_HUB_ADDR(MD_UREG0_0) /* UART command reg */
+#define KL_UART_DATA LOCAL_HUB_ADDR(MD_UREG0_1) /* UART data reg */
+#define KL_I2C_REG MD_UREG0_0 /* I2C reg */
+
+#ifndef __ASSEMBLY__
+
+/* Address 0x400 to 0x1000 ualias points to cache error eframe + misc
+ * CACHE_ERR_SP_PTR could either contain an address to the stack, or
+ * the stack could start at CACHE_ERR_SP_PTR
+ */
+#if defined (HUB_ERR_STS_WAR)
+#define CACHE_ERR_EFRAME 0x480
+#else /* HUB_ERR_STS_WAR */
+#define CACHE_ERR_EFRAME 0x400
+#endif /* HUB_ERR_STS_WAR */
+
+#define CACHE_ERR_ECCFRAME (CACHE_ERR_EFRAME + EF_SIZE)
+#define CACHE_ERR_SP_PTR (0x1000 - 32) /* why -32? TBD */
+#define CACHE_ERR_IBASE_PTR (0x1000 - 40)
+#define CACHE_ERR_SP (CACHE_ERR_SP_PTR - 16)
+#define CACHE_ERR_AREA_SIZE (ARCS_SPB_OFFSET - CACHE_ERR_EFRAME)
+
+#endif /* !__ASSEMBLY__ */
+
+#define _ARCSPROM
+
+#ifdef _STANDALONE
+
+/*
+ * The PROM needs to pass the device base address and the
+ * device pci cfg space address to the device drivers during
+ * install. The COMPONENT->Key field is used for this purpose.
+ * Macros needed by SN0 device drivers to convert the
+ * COMPONENT->Key field to the respective base address.
+ * Key field looks as follows:
+ *
+ * +----------------------------------------------------+
+ * |devnasid | widget |pciid |hubwidid|hstnasid | adap |
+ * | 2 | 1 | 1 | 1 | 2 | 1 |
+ * +----------------------------------------------------+
+ * | | | | | | |
+ * 64 48 40 32 24 8 0
+ *
+ * These are used by standalone drivers till the io infrastructure
+ * is in place.
+ */
+
+#ifndef __ASSEMBLY__
+
+#define uchar unsigned char
+
+#define KEY_DEVNASID_SHFT 48
+#define KEY_WIDID_SHFT 40
+#define KEY_PCIID_SHFT 32
+#define KEY_HUBWID_SHFT 24
+#define KEY_HSTNASID_SHFT 8
+
+#define MK_SN0_KEY(nasid, widid, pciid) \
+ ((((__psunsigned_t)nasid)<< KEY_DEVNASID_SHFT |\
+ ((__psunsigned_t)widid) << KEY_WIDID_SHFT) |\
+ ((__psunsigned_t)pciid) << KEY_PCIID_SHFT)
+
+#define ADD_HUBWID_KEY(key,hubwid)\
+ (key|=((__psunsigned_t)hubwid << KEY_HUBWID_SHFT))
+
+#define ADD_HSTNASID_KEY(key,hstnasid)\
+ (key|=((__psunsigned_t)hstnasid << KEY_HSTNASID_SHFT))
+
+#define GET_DEVNASID_FROM_KEY(key) ((short)(key >> KEY_DEVNASID_SHFT))
+#define GET_WIDID_FROM_KEY(key) ((uchar)(key >> KEY_WIDID_SHFT))
+#define GET_PCIID_FROM_KEY(key) ((uchar)(key >> KEY_PCIID_SHFT))
+#define GET_HUBWID_FROM_KEY(key) ((uchar)(key >> KEY_HUBWID_SHFT))
+#define GET_HSTNASID_FROM_KEY(key) ((short)(key >> KEY_HSTNASID_SHFT))
+
+#define PCI_64_TARGID_SHFT 60
+
+#define GET_PCIBASE_FROM_KEY(key) (NODE_SWIN_BASE(GET_DEVNASID_FROM_KEY(key),\
+ GET_WIDID_FROM_KEY(key))\
+ | BRIDGE_DEVIO(GET_PCIID_FROM_KEY(key)))
+
+#define GET_PCICFGBASE_FROM_KEY(key) \
+ (NODE_SWIN_BASE(GET_DEVNASID_FROM_KEY(key),\
+ GET_WIDID_FROM_KEY(key))\
+ | BRIDGE_TYPE0_CFG_DEV(GET_PCIID_FROM_KEY(key)))
+
+#define GET_WIDBASE_FROM_KEY(key) \
+ (NODE_SWIN_BASE(GET_DEVNASID_FROM_KEY(key),\
+ GET_WIDID_FROM_KEY(key)))
+
+#define PUT_INSTALL_STATUS(c,s) c->Revision = s
+#define GET_INSTALL_STATUS(c) c->Revision
+
+#endif /* !__ASSEMBLY__ */
+
+#endif /* _STANDALONE */
+
+#if defined (HUB_ERR_STS_WAR)
+
+#define ERR_STS_WAR_REGISTER IIO_IIBUSERR
+#define ERR_STS_WAR_ADDR LOCAL_HUB_ADDR(IIO_IIBUSERR)
+#define ERR_STS_WAR_PHYSADDR TO_PHYS((__psunsigned_t)ERR_STS_WAR_ADDR)
+ /* Used to match addr in error reg. */
+#define OLD_ERR_STS_WAR_OFFSET ((MD_MEM_BANKS * MD_BANK_SIZE) - 0x100)
+
+#endif /* HUB_ERR_STS_WAR */
+
+#endif /* _ASM_SN_SN0_ADDRS_H */