aboutsummaryrefslogtreecommitdiff
path: root/include/asm-sparc/auxio_32.h
diff options
context:
space:
mode:
Diffstat (limited to 'include/asm-sparc/auxio_32.h')
-rw-r--r--include/asm-sparc/auxio_32.h89
1 files changed, 0 insertions, 89 deletions
diff --git a/include/asm-sparc/auxio_32.h b/include/asm-sparc/auxio_32.h
deleted file mode 100644
index 4db8f23db20..00000000000
--- a/include/asm-sparc/auxio_32.h
+++ /dev/null
@@ -1,89 +0,0 @@
-/*
- * auxio.h: Definitions and code for the Auxiliary I/O register.
- *
- * Copyright (C) 1995 David S. Miller (davem@caip.rutgers.edu)
- */
-#ifndef _SPARC_AUXIO_H
-#define _SPARC_AUXIO_H
-
-#include <asm/system.h>
-#include <asm/vaddrs.h>
-
-/* This register is an unsigned char in IO space. It does two things.
- * First, it is used to control the front panel LED light on machines
- * that have it (good for testing entry points to trap handlers and irq's)
- * Secondly, it controls various floppy drive parameters.
- */
-#define AUXIO_ORMEIN 0xf0 /* All writes must set these bits. */
-#define AUXIO_ORMEIN4M 0xc0 /* sun4m - All writes must set these bits. */
-#define AUXIO_FLPY_DENS 0x20 /* Floppy density, high if set. Read only. */
-#define AUXIO_FLPY_DCHG 0x10 /* A disk change occurred. Read only. */
-#define AUXIO_EDGE_ON 0x10 /* sun4m - On means Jumper block is in. */
-#define AUXIO_FLPY_DSEL 0x08 /* Drive select/start-motor. Write only. */
-#define AUXIO_LINK_TEST 0x08 /* sun4m - On means TPE Carrier detect. */
-
-/* Set the following to one, then zero, after doing a pseudo DMA transfer. */
-#define AUXIO_FLPY_TCNT 0x04 /* Floppy terminal count. Write only. */
-
-/* Set the following to zero to eject the floppy. */
-#define AUXIO_FLPY_EJCT 0x02 /* Eject floppy disk. Write only. */
-#define AUXIO_LED 0x01 /* On if set, off if unset. Read/Write */
-
-#ifndef __ASSEMBLY__
-
-/*
- * NOTE: these routines are implementation dependent--
- * understand the hardware you are querying!
- */
-extern void set_auxio(unsigned char bits_on, unsigned char bits_off);
-extern unsigned char get_auxio(void); /* .../asm-sparc/floppy.h */
-
-/*
- * The following routines are provided for driver-compatibility
- * with sparc64 (primarily sunlance.c)
- */
-
-#define AUXIO_LTE_ON 1
-#define AUXIO_LTE_OFF 0
-
-/* auxio_set_lte - Set Link Test Enable (TPE Link Detect)
- *
- * on - AUXIO_LTE_ON or AUXIO_LTE_OFF
- */
-#define auxio_set_lte(on) \
-do { \
- if(on) { \
- set_auxio(AUXIO_LINK_TEST, 0); \
- } else { \
- set_auxio(0, AUXIO_LINK_TEST); \
- } \
-} while (0)
-
-#define AUXIO_LED_ON 1
-#define AUXIO_LED_OFF 0
-
-/* auxio_set_led - Set system front panel LED
- *
- * on - AUXIO_LED_ON or AUXIO_LED_OFF
- */
-#define auxio_set_led(on) \
-do { \
- if(on) { \
- set_auxio(AUXIO_LED, 0); \
- } else { \
- set_auxio(0, AUXIO_LED); \
- } \
-} while (0)
-
-#endif /* !(__ASSEMBLY__) */
-
-
-/* AUXIO2 (Power Off Control) */
-extern __volatile__ unsigned char * auxio_power_register;
-
-#define AUXIO_POWER_DETECT_FAILURE 32
-#define AUXIO_POWER_CLEAR_FAILURE 2
-#define AUXIO_POWER_OFF 1
-
-
-#endif /* !(_SPARC_AUXIO_H) */