diff options
Diffstat (limited to 'include/linux/libata.h')
| -rw-r--r-- | include/linux/libata.h | 88 |
1 files changed, 68 insertions, 20 deletions
diff --git a/include/linux/libata.h b/include/linux/libata.h index c7665a4134c..2c6bd66209f 100644 --- a/include/linux/libata.h +++ b/include/linux/libata.h @@ -213,10 +213,11 @@ enum { ATA_PFLAG_FROZEN = (1 << 2), /* port is frozen */ ATA_PFLAG_RECOVERED = (1 << 3), /* recovery action performed */ ATA_PFLAG_LOADING = (1 << 4), /* boot/loading probe */ - ATA_PFLAG_UNLOADING = (1 << 5), /* module is unloading */ ATA_PFLAG_SCSI_HOTPLUG = (1 << 6), /* SCSI hotplug scheduled */ ATA_PFLAG_INITIALIZING = (1 << 7), /* being initialized, don't touch */ ATA_PFLAG_RESETTING = (1 << 8), /* reset in progress */ + ATA_PFLAG_UNLOADING = (1 << 9), /* driver is being unloaded */ + ATA_PFLAG_UNLOADED = (1 << 10), /* driver is unloaded */ ATA_PFLAG_SUSPENDED = (1 << 17), /* port is suspended (power) */ ATA_PFLAG_PM_PENDING = (1 << 18), /* PM operation pending */ @@ -238,6 +239,7 @@ enum { /* host set flags */ ATA_HOST_SIMPLEX = (1 << 0), /* Host is simplex, one DMA channel per host only */ ATA_HOST_STARTED = (1 << 1), /* Host started */ + ATA_HOST_PARALLEL_SCAN = (1 << 2), /* Ports on this host can be scanned in parallel */ /* bits 24:31 of host->flags are reserved for LLD specific flags */ @@ -375,6 +377,7 @@ enum { ATA_HORKAGE_BRIDGE_OK = (1 << 10), /* no bridge limits */ ATA_HORKAGE_ATAPI_MOD16_DMA = (1 << 11), /* use ATAPI DMA for commands not multiple of 16 bytes */ + ATA_HORKAGE_FIRMWARE_WARN = (1 << 12), /* firwmare update warning */ /* DMA mask for user DMA control: User visible values; DO NOT renumber */ @@ -398,12 +401,14 @@ enum { ATA_TIMING_CYC8B, ATA_TIMING_ACTIVE = (1 << 4), ATA_TIMING_RECOVER = (1 << 5), - ATA_TIMING_CYCLE = (1 << 6), - ATA_TIMING_UDMA = (1 << 7), + ATA_TIMING_DMACK_HOLD = (1 << 6), + ATA_TIMING_CYCLE = (1 << 7), + ATA_TIMING_UDMA = (1 << 8), ATA_TIMING_ALL = ATA_TIMING_SETUP | ATA_TIMING_ACT8B | ATA_TIMING_REC8B | ATA_TIMING_CYC8B | ATA_TIMING_ACTIVE | ATA_TIMING_RECOVER | - ATA_TIMING_CYCLE | ATA_TIMING_UDMA, + ATA_TIMING_DMACK_HOLD | ATA_TIMING_CYCLE | + ATA_TIMING_UDMA, }; enum ata_xfer_mask { @@ -698,6 +703,7 @@ struct ata_port { unsigned int cbl; /* cable type; ATA_CBL_xxx */ struct ata_queued_cmd qcmd[ATA_MAX_QUEUE]; + unsigned long qc_allocated; unsigned int qc_active; int nr_active_links; /* #links with active qcs */ @@ -862,6 +868,7 @@ struct ata_timing { unsigned short cyc8b; /* t0 for 8-bit I/O */ unsigned short active; /* t2 or tD */ unsigned short recover; /* t2i or tK */ + unsigned short dmack_hold; /* tj */ unsigned short cycle; /* t0 */ unsigned short udma; /* t2CYCTYP/2 */ }; @@ -923,6 +930,8 @@ extern void ata_host_init(struct ata_host *, struct device *, extern int ata_scsi_detect(struct scsi_host_template *sht); extern int ata_scsi_ioctl(struct scsi_device *dev, int cmd, void __user *arg); extern int ata_scsi_queuecmd(struct scsi_cmnd *cmd, void (*done)(struct scsi_cmnd *)); +extern int ata_sas_scsi_ioctl(struct ata_port *ap, struct scsi_device *dev, + int cmd, void __user *arg); extern void ata_sas_port_destroy(struct ata_port *); extern struct ata_port *ata_sas_port_alloc(struct ata_host *, struct ata_port_info *, struct Scsi_Host *); @@ -1283,26 +1292,62 @@ static inline int ata_link_active(struct ata_link *link) return ata_tag_valid(link->active_tag) || link->sactive; } -extern struct ata_link *__ata_port_next_link(struct ata_port *ap, - struct ata_link *link, - bool dev_only); +/* + * Iterators + * + * ATA_LITER_* constants are used to select link iteration mode and + * ATA_DITER_* device iteration mode. + * + * For a custom iteration directly using ata_{link|dev}_next(), if + * @link or @dev, respectively, is NULL, the first element is + * returned. @dev and @link can be any valid device or link and the + * next element according to the iteration mode will be returned. + * After the last element, NULL is returned. + */ +enum ata_link_iter_mode { + ATA_LITER_EDGE, /* if present, PMP links only; otherwise, + * host link. no slave link */ + ATA_LITER_HOST_FIRST, /* host link followed by PMP or slave links */ + ATA_LITER_PMP_FIRST, /* PMP links followed by host link, + * slave link still comes after host link */ +}; + +enum ata_dev_iter_mode { + ATA_DITER_ENABLED, + ATA_DITER_ENABLED_REVERSE, + ATA_DITER_ALL, + ATA_DITER_ALL_REVERSE, +}; -#define __ata_port_for_each_link(link, ap) \ - for ((link) = __ata_port_next_link((ap), NULL, false); (link); \ - (link) = __ata_port_next_link((ap), (link), false)) +extern struct ata_link *ata_link_next(struct ata_link *link, + struct ata_port *ap, + enum ata_link_iter_mode mode); -#define ata_port_for_each_link(link, ap) \ - for ((link) = __ata_port_next_link((ap), NULL, true); (link); \ - (link) = __ata_port_next_link((ap), (link), true)) +extern struct ata_device *ata_dev_next(struct ata_device *dev, + struct ata_link *link, + enum ata_dev_iter_mode mode); -#define ata_link_for_each_dev(dev, link) \ - for ((dev) = (link)->device; \ - (dev) < (link)->device + ata_link_max_devices(link) || ((dev) = NULL); \ - (dev)++) +/* + * Shortcut notation for iterations + * + * ata_for_each_link() iterates over each link of @ap according to + * @mode. @link points to the current link in the loop. @link is + * NULL after loop termination. ata_for_each_dev() works the same way + * except that it iterates over each device of @link. + * + * Note that the mode prefixes ATA_{L|D}ITER_ shouldn't need to be + * specified when using the following shorthand notations. Only the + * mode itself (EDGE, HOST_FIRST, ENABLED, etc...) should be + * specified. This not only increases brevity but also makes it + * impossible to use ATA_LITER_* for device iteration or vice-versa. + */ +#define ata_for_each_link(link, ap, mode) \ + for ((link) = ata_link_next(NULL, (ap), ATA_LITER_##mode); (link); \ + (link) = ata_link_next((link), (ap), ATA_LITER_##mode)) -#define ata_link_for_each_dev_reverse(dev, link) \ - for ((dev) = (link)->device + ata_link_max_devices(link) - 1; \ - (dev) >= (link)->device || ((dev) = NULL); (dev)--) +#define ata_for_each_dev(dev, link, mode) \ + for ((dev) = ata_dev_next(NULL, (link), ATA_DITER_##mode); (dev); \ + (dev) = ata_dev_next((dev), (link), ATA_DITER_##mode)) /** * ata_ncq_enabled - Test whether NCQ is enabled @@ -1479,6 +1524,7 @@ extern void sata_pmp_error_handler(struct ata_port *ap); extern const struct ata_port_operations ata_sff_port_ops; extern const struct ata_port_operations ata_bmdma_port_ops; +extern const struct ata_port_operations ata_bmdma32_port_ops; /* PIO only, sg_tablesize and dma_boundary limits can be removed */ #define ATA_PIO_SHT(drv_name) \ @@ -1506,6 +1552,8 @@ extern void ata_sff_exec_command(struct ata_port *ap, const struct ata_taskfile *tf); extern unsigned int ata_sff_data_xfer(struct ata_device *dev, unsigned char *buf, unsigned int buflen, int rw); +extern unsigned int ata_sff_data_xfer32(struct ata_device *dev, + unsigned char *buf, unsigned int buflen, int rw); extern unsigned int ata_sff_data_xfer_noirq(struct ata_device *dev, unsigned char *buf, unsigned int buflen, int rw); extern u8 ata_sff_irq_on(struct ata_port *ap); |