aboutsummaryrefslogtreecommitdiff
path: root/include/linux/spi
diff options
context:
space:
mode:
Diffstat (limited to 'include/linux/spi')
-rw-r--r--include/linux/spi/ds1305.h35
-rw-r--r--include/linux/spi/mcp23s08.h25
-rw-r--r--include/linux/spi/spi.h2
3 files changed, 52 insertions, 10 deletions
diff --git a/include/linux/spi/ds1305.h b/include/linux/spi/ds1305.h
new file mode 100644
index 00000000000..287ec830eab
--- /dev/null
+++ b/include/linux/spi/ds1305.h
@@ -0,0 +1,35 @@
+#ifndef __LINUX_SPI_DS1305_H
+#define __LINUX_SPI_DS1305_H
+
+/*
+ * One-time configuration for ds1305 and ds1306 RTC chips.
+ *
+ * Put a pointer to this in spi_board_info.platform_data if you want to
+ * be sure that Linux (re)initializes this as needed ... after losing
+ * backup power, and potentially on the first boot.
+ */
+struct ds1305_platform_data {
+
+ /* Trickle charge configuration: it's OK to leave out the MAGIC
+ * bitmask; mask in either DS1 or DS2, and then one of 2K/4k/8K.
+ */
+#define DS1305_TRICKLE_MAGIC 0xa0
+#define DS1305_TRICKLE_DS2 0x08 /* two diodes */
+#define DS1305_TRICKLE_DS1 0x04 /* one diode */
+#define DS1305_TRICKLE_2K 0x01 /* 2 KOhm resistance */
+#define DS1305_TRICKLE_4K 0x02 /* 4 KOhm resistance */
+#define DS1305_TRICKLE_8K 0x03 /* 8 KOhm resistance */
+ u8 trickle;
+
+ /* set only on ds1306 parts */
+ bool is_ds1306;
+
+ /* ds1306 only: enable 1 Hz output */
+ bool en_1hz;
+
+ /* REVISIT: the driver currently expects nINT0 to be wired
+ * as the alarm IRQ. ALM1 may also need to be set up ...
+ */
+};
+
+#endif /* __LINUX_SPI_DS1305_H */
diff --git a/include/linux/spi/mcp23s08.h b/include/linux/spi/mcp23s08.h
index 835ddf47d45..22ef107d770 100644
--- a/include/linux/spi/mcp23s08.h
+++ b/include/linux/spi/mcp23s08.h
@@ -1,18 +1,25 @@
-/* FIXME driver should be able to handle all four slaves that
- * can be hooked up to each chipselect, as well as IRQs...
- */
+/* FIXME driver should be able to handle IRQs... */
+
+struct mcp23s08_chip_info {
+ bool is_present; /* true iff populated */
+ u8 pullups; /* BIT(x) means enable pullup x */
+};
struct mcp23s08_platform_data {
- /* four slaves can share one SPI chipselect */
- u8 slave;
+ /* Four slaves (numbered 0..3) can share one SPI chipselect, and
+ * will provide 8..32 GPIOs using 1..4 gpio_chip instances.
+ */
+ struct mcp23s08_chip_info chip[4];
- /* number assigned to the first GPIO */
+ /* "base" is the number of the first GPIO. Dynamic assignment is
+ * not currently supported, and even if there are gaps in chip
+ * addressing the GPIO numbers are sequential .. so for example
+ * if only slaves 0 and 3 are present, their GPIOs range from
+ * base to base+15.
+ */
unsigned base;
- /* pins with pullups */
- u8 pullups;
-
void *context; /* param to setup/teardown */
int (*setup)(struct spi_device *spi,
diff --git a/include/linux/spi/spi.h b/include/linux/spi/spi.h
index b9a76c97208..a9cc29d4665 100644
--- a/include/linux/spi/spi.h
+++ b/include/linux/spi/spi.h
@@ -82,7 +82,7 @@ struct spi_device {
int irq;
void *controller_state;
void *controller_data;
- const char *modalias;
+ char modalias[32];
/*
* likely need more hooks for more protocol options affecting how