1 files changed, 571 insertions, 49 deletions

diff --git a/net/mac80211/iface.c b/net/mac80211/iface.c
index 610ed1d9893..8336fee68d3 100644
--- a/net/mac80211/iface.c
+++ b/net/mac80211/iface.c
@@ -1,4 +1,6 @@
 /*
+ * Interface handling (except master interface)
+ *
  * Copyright 2002-2005, Instant802 Networks, Inc.
  * Copyright 2005-2006, Devicescape Software, Inc.
  * Copyright (c) 2006 Jiri Benc <jbenc@suse.cz>
@@ -17,7 +19,539 @@
 #include "sta_info.h"
 #include "debugfs_netdev.h"
 #include "mesh.h"
+#include "led.h"
+
+static int ieee80211_change_mtu(struct net_device *dev, int new_mtu)
+{
+	int meshhdrlen;
+	struct ieee80211_sub_if_data *sdata = IEEE80211_DEV_TO_SUB_IF(dev);
+
+	meshhdrlen = (sdata->vif.type == NL80211_IFTYPE_MESH_POINT) ? 5 : 0;
+
+	/* FIX: what would be proper limits for MTU?
+	 * This interface uses 802.3 frames. */
+	if (new_mtu < 256 ||
+	    new_mtu > IEEE80211_MAX_DATA_LEN - 24 - 6 - meshhdrlen) {
+		return -EINVAL;
+	}
+
+#ifdef CONFIG_MAC80211_VERBOSE_DEBUG
+	printk(KERN_DEBUG "%s: setting MTU %d\n", dev->name, new_mtu);
+#endif /* CONFIG_MAC80211_VERBOSE_DEBUG */
+	dev->mtu = new_mtu;
+	return 0;
+}
+
+static inline int identical_mac_addr_allowed(int type1, int type2)
+{
+	return type1 == NL80211_IFTYPE_MONITOR ||
+		type2 == NL80211_IFTYPE_MONITOR ||
+		(type1 == NL80211_IFTYPE_AP && type2 == NL80211_IFTYPE_WDS) ||
+		(type1 == NL80211_IFTYPE_WDS &&
+			(type2 == NL80211_IFTYPE_WDS ||
+			 type2 == NL80211_IFTYPE_AP)) ||
+		(type1 == NL80211_IFTYPE_AP && type2 == NL80211_IFTYPE_AP_VLAN) ||
+		(type1 == NL80211_IFTYPE_AP_VLAN &&
+			(type2 == NL80211_IFTYPE_AP ||
+			 type2 == NL80211_IFTYPE_AP_VLAN));
+}
+
+static int ieee80211_open(struct net_device *dev)
+{
+	struct ieee80211_sub_if_data *sdata = IEEE80211_DEV_TO_SUB_IF(dev);
+	struct ieee80211_sub_if_data *nsdata;
+	struct ieee80211_local *local = sdata->local;
+	struct sta_info *sta;
+	struct ieee80211_if_init_conf conf;
+	u32 changed = 0;
+	int res;
+	bool need_hw_reconfig = 0;
+	u8 null_addr[ETH_ALEN] = {0};
+
+	/* fail early if user set an invalid address */
+	if (compare_ether_addr(dev->dev_addr, null_addr) &&
+	    !is_valid_ether_addr(dev->dev_addr))
+		return -EADDRNOTAVAIL;
+
+	/* we hold the RTNL here so can safely walk the list */
+	list_for_each_entry(nsdata, &local->interfaces, list) {
+		struct net_device *ndev = nsdata->dev;
+
+		if (ndev != dev && netif_running(ndev)) {
+			/*
+			 * Allow only a single IBSS interface to be up at any
+			 * time. This is restricted because beacon distribution
+			 * cannot work properly if both are in the same IBSS.
+			 *
+			 * To remove this restriction we'd have to disallow them
+			 * from setting the same SSID on different IBSS interfaces
+			 * belonging to the same hardware. Then, however, we're
+			 * faced with having to adopt two different TSF timers...
+			 */
+			if (sdata->vif.type == NL80211_IFTYPE_ADHOC &&
+			    nsdata->vif.type == NL80211_IFTYPE_ADHOC)
+				return -EBUSY;
+
+			/*
+			 * The remaining checks are only performed for interfaces
+			 * with the same MAC address.
+			 */
+			if (compare_ether_addr(dev->dev_addr, ndev->dev_addr))
+				continue;
+
+			/*
+			 * check whether it may have the same address
+			 */
+			if (!identical_mac_addr_allowed(sdata->vif.type,
+							nsdata->vif.type))
+				return -ENOTUNIQ;
+
+			/*
+			 * can only add VLANs to enabled APs
+			 */
+			if (sdata->vif.type == NL80211_IFTYPE_AP_VLAN &&
+			    nsdata->vif.type == NL80211_IFTYPE_AP)
+				sdata->bss = &nsdata->u.ap;
+		}
+	}
+
+	switch (sdata->vif.type) {
+	case NL80211_IFTYPE_WDS:
+		if (!is_valid_ether_addr(sdata->u.wds.remote_addr))
+			return -ENOLINK;
+		break;
+	case NL80211_IFTYPE_AP_VLAN:
+		if (!sdata->bss)
+			return -ENOLINK;
+		list_add(&sdata->u.vlan.list, &sdata->bss->vlans);
+		break;
+	case NL80211_IFTYPE_AP:
+		sdata->bss = &sdata->u.ap;
+		break;
+	case NL80211_IFTYPE_MESH_POINT:
+		if (!ieee80211_vif_is_mesh(&sdata->vif))
+			break;
+		/* mesh ifaces must set allmulti to forward mcast traffic */
+		atomic_inc(&local->iff_allmultis);
+		break;
+	case NL80211_IFTYPE_STATION:
+	case NL80211_IFTYPE_MONITOR:
+	case NL80211_IFTYPE_ADHOC:
+		/* no special treatment */
+		break;
+	case NL80211_IFTYPE_UNSPECIFIED:
+	case __NL80211_IFTYPE_AFTER_LAST:
+		/* cannot happen */
+		WARN_ON(1);
+		break;
+	}
+
+	if (local->open_count == 0) {
+		res = 0;
+		if (local->ops->start)
+			res = local->ops->start(local_to_hw(local));
+		if (res)
+			goto err_del_bss;
+		need_hw_reconfig = 1;
+		ieee80211_led_radio(local, local->hw.conf.radio_enabled);
+	}
+
+	/*
+	 * Check all interfaces and copy the hopefully now-present
+	 * MAC address to those that have the special null one.
+	 */
+	list_for_each_entry(nsdata, &local->interfaces, list) {
+		struct net_device *ndev = nsdata->dev;
+
+		/*
+		 * No need to check netif_running since we do not allow
+		 * it to start up with this invalid address.
+		 */
+		if (compare_ether_addr(null_addr, ndev->dev_addr) == 0)
+			memcpy(ndev->dev_addr,
+			       local->hw.wiphy->perm_addr,
+			       ETH_ALEN);
+	}
+
+	if (compare_ether_addr(null_addr, local->mdev->dev_addr) == 0)
+		memcpy(local->mdev->dev_addr, local->hw.wiphy->perm_addr,
+		       ETH_ALEN);
+
+	/*
+	 * Validate the MAC address for this device.
+	 */
+	if (!is_valid_ether_addr(dev->dev_addr)) {
+		if (!local->open_count && local->ops->stop)
+			local->ops->stop(local_to_hw(local));
+		return -EADDRNOTAVAIL;
+	}
+
+	switch (sdata->vif.type) {
+	case NL80211_IFTYPE_AP_VLAN:
+		/* no need to tell driver */
+		break;
+	case NL80211_IFTYPE_MONITOR:
+		if (sdata->u.mntr_flags & MONITOR_FLAG_COOK_FRAMES) {
+			local->cooked_mntrs++;
+			break;
+		}
+
+		/* must be before the call to ieee80211_configure_filter */
+		local->monitors++;
+		if (local->monitors == 1)
+			local->hw.conf.flags |= IEEE80211_CONF_RADIOTAP;
+
+		if (sdata->u.mntr_flags & MONITOR_FLAG_FCSFAIL)
+			local->fif_fcsfail++;
+		if (sdata->u.mntr_flags & MONITOR_FLAG_PLCPFAIL)
+			local->fif_plcpfail++;
+		if (sdata->u.mntr_flags & MONITOR_FLAG_CONTROL)
+			local->fif_control++;
+		if (sdata->u.mntr_flags & MONITOR_FLAG_OTHER_BSS)
+			local->fif_other_bss++;
+
+		netif_addr_lock_bh(local->mdev);
+		ieee80211_configure_filter(local);
+		netif_addr_unlock_bh(local->mdev);
+		break;
+	case NL80211_IFTYPE_STATION:
+	case NL80211_IFTYPE_ADHOC:
+		sdata->u.sta.flags &= ~IEEE80211_STA_PREV_BSSID_SET;
+		/* fall through */
+	default:
+		conf.vif = &sdata->vif;
+		conf.type = sdata->vif.type;
+		conf.mac_addr = dev->dev_addr;
+		res = local->ops->add_interface(local_to_hw(local), &conf);
+		if (res)
+			goto err_stop;
+
+		if (ieee80211_vif_is_mesh(&sdata->vif))
+			ieee80211_start_mesh(sdata);
+		changed |= ieee80211_reset_erp_info(sdata);
+		ieee80211_bss_info_change_notify(sdata, changed);
+		ieee80211_enable_keys(sdata);
+
+		if (sdata->vif.type == NL80211_IFTYPE_STATION &&
+		    !(sdata->flags & IEEE80211_SDATA_USERSPACE_MLME))
+			netif_carrier_off(dev);
+		else
+			netif_carrier_on(dev);
+	}
+
+	if (sdata->vif.type == NL80211_IFTYPE_WDS) {
+		/* Create STA entry for the WDS peer */
+		sta = sta_info_alloc(sdata, sdata->u.wds.remote_addr,
+				     GFP_KERNEL);
+		if (!sta) {
+			res = -ENOMEM;
+			goto err_del_interface;
+		}
+
+		/* no locking required since STA is not live yet */
+		sta->flags |= WLAN_STA_AUTHORIZED;
+
+		res = sta_info_insert(sta);
+		if (res) {
+			/* STA has been freed */
+			goto err_del_interface;
+		}
+	}
+
+	if (local->open_count == 0) {
+		res = dev_open(local->mdev);
+		WARN_ON(res);
+		if (res)
+			goto err_del_interface;
+		tasklet_enable(&local->tx_pending_tasklet);
+		tasklet_enable(&local->tasklet);
+	}
+
+	/*
+	 * set_multicast_list will be invoked by the networking core
+	 * which will check whether any increments here were done in
+	 * error and sync them down to the hardware as filter flags.
+	 */
+	if (sdata->flags & IEEE80211_SDATA_ALLMULTI)
+		atomic_inc(&local->iff_allmultis);
+
+	if (sdata->flags & IEEE80211_SDATA_PROMISC)
+		atomic_inc(&local->iff_promiscs);
+
+	local->open_count++;
+	if (need_hw_reconfig) {
+		ieee80211_hw_config(local);
+		/*
+		 * set default queue parameters so drivers don't
+		 * need to initialise the hardware if the hardware
+		 * doesn't start up with sane defaults
+		 */
+		ieee80211_set_wmm_default(sdata);
+	}
+
+	/*
+	 * ieee80211_sta_work is disabled while network interface
+	 * is down. Therefore, some configuration changes may not
+	 * yet be effective. Trigger execution of ieee80211_sta_work
+	 * to fix this.
+	 */
+	if (sdata->vif.type == NL80211_IFTYPE_STATION ||
+	    sdata->vif.type == NL80211_IFTYPE_ADHOC) {
+		struct ieee80211_if_sta *ifsta = &sdata->u.sta;
+		queue_work(local->hw.workqueue, &ifsta->work);
+	}
+
+	netif_tx_start_all_queues(dev);
+
+	return 0;
+ err_del_interface:
+	local->ops->remove_interface(local_to_hw(local), &conf);
+ err_stop:
+	if (!local->open_count && local->ops->stop)
+		local->ops->stop(local_to_hw(local));
+ err_del_bss:
+	sdata->bss = NULL;
+	if (sdata->vif.type == NL80211_IFTYPE_AP_VLAN)
+		list_del(&sdata->u.vlan.list);
+	return res;
+}
+
+static int ieee80211_stop(struct net_device *dev)
+{
+	struct ieee80211_sub_if_data *sdata = IEEE80211_DEV_TO_SUB_IF(dev);
+	struct ieee80211_local *local = sdata->local;
+	struct ieee80211_if_init_conf conf;
+	struct sta_info *sta;
+
+	/*
+	 * Stop TX on this interface first.
+	 */
+	netif_tx_stop_all_queues(dev);
+
+	/*
+	 * Now delete all active aggregation sessions.
+	 */
+	rcu_read_lock();
+
+	list_for_each_entry_rcu(sta, &local->sta_list, list) {
+		if (sta->sdata == sdata)
+			ieee80211_sta_tear_down_BA_sessions(sdata,
+							    sta->sta.addr);
+	}
+
+	rcu_read_unlock();
+
+	/*
+	 * Remove all stations associated with this interface.
+	 *
+	 * This must be done before calling ops->remove_interface()
+	 * because otherwise we can later invoke ops->sta_notify()
+	 * whenever the STAs are removed, and that invalidates driver
+	 * assumptions about always getting a vif pointer that is valid
+	 * (because if we remove a STA after ops->remove_interface()
+	 * the driver will have removed the vif info already!)
+	 *
+	 * We could relax this and only unlink the stations from the
+	 * hash table and list but keep them on a per-sdata list that
+	 * will be inserted back again when the interface is brought
+	 * up again, but I don't currently see a use case for that,
+	 * except with WDS which gets a STA entry created when it is
+	 * brought up.
+	 */
+	sta_info_flush(local, sdata);
+
+	/*
+	 * Don't count this interface for promisc/allmulti while it
+	 * is down. dev_mc_unsync() will invoke set_multicast_list
+	 * on the master interface which will sync these down to the
+	 * hardware as filter flags.
+	 */
+	if (sdata->flags & IEEE80211_SDATA_ALLMULTI)
+		atomic_dec(&local->iff_allmultis);
+
+	if (sdata->flags & IEEE80211_SDATA_PROMISC)
+		atomic_dec(&local->iff_promiscs);
+
+	dev_mc_unsync(local->mdev, dev);
+
+	/* APs need special treatment */
+	if (sdata->vif.type == NL80211_IFTYPE_AP) {
+		struct ieee80211_sub_if_data *vlan, *tmp;
+		struct beacon_data *old_beacon = sdata->u.ap.beacon;
+
+		/* remove beacon */
+		rcu_assign_pointer(sdata->u.ap.beacon, NULL);
+		synchronize_rcu();
+		kfree(old_beacon);
+
+		/* down all dependent devices, that is VLANs */
+		list_for_each_entry_safe(vlan, tmp, &sdata->u.ap.vlans,
+					 u.vlan.list)
+			dev_close(vlan->dev);
+		WARN_ON(!list_empty(&sdata->u.ap.vlans));
+	}
+
+	local->open_count--;
+
+	switch (sdata->vif.type) {
+	case NL80211_IFTYPE_AP_VLAN:
+		list_del(&sdata->u.vlan.list);
+		/* no need to tell driver */
+		break;
+	case NL80211_IFTYPE_MONITOR:
+		if (sdata->u.mntr_flags & MONITOR_FLAG_COOK_FRAMES) {
+			local->cooked_mntrs--;
+			break;
+		}
+
+		local->monitors--;
+		if (local->monitors == 0)
+			local->hw.conf.flags &= ~IEEE80211_CONF_RADIOTAP;
+
+		if (sdata->u.mntr_flags & MONITOR_FLAG_FCSFAIL)
+			local->fif_fcsfail--;
+		if (sdata->u.mntr_flags & MONITOR_FLAG_PLCPFAIL)
+			local->fif_plcpfail--;
+		if (sdata->u.mntr_flags & MONITOR_FLAG_CONTROL)
+			local->fif_control--;
+		if (sdata->u.mntr_flags & MONITOR_FLAG_OTHER_BSS)
+			local->fif_other_bss--;
+
+		netif_addr_lock_bh(local->mdev);
+		ieee80211_configure_filter(local);
+		netif_addr_unlock_bh(local->mdev);
+		break;
+	case NL80211_IFTYPE_STATION:
+	case NL80211_IFTYPE_ADHOC:
+		sdata->u.sta.state = IEEE80211_STA_MLME_DISABLED;
+		memset(sdata->u.sta.bssid, 0, ETH_ALEN);
+		del_timer_sync(&sdata->u.sta.timer);
+		/*
+		 * If the timer fired while we waited for it, it will have
+		 * requeued the work. Now the work will be running again
+		 * but will not rearm the timer again because it checks
+		 * whether the interface is running, which, at this point,
+		 * it no longer is.
+		 */
+		cancel_work_sync(&sdata->u.sta.work);
+		/*
+		 * When we get here, the interface is marked down.
+		 * Call synchronize_rcu() to wait for the RX path
+		 * should it be using the interface and enqueuing
+		 * frames at this very time on another CPU.
+		 */
+		synchronize_rcu();
+		skb_queue_purge(&sdata->u.sta.skb_queue);
+
+		sdata->u.sta.flags &= ~IEEE80211_STA_PRIVACY_INVOKED;
+		kfree(sdata->u.sta.extra_ie);
+		sdata->u.sta.extra_ie = NULL;
+		sdata->u.sta.extra_ie_len = 0;
+		/* fall through */
+	case NL80211_IFTYPE_MESH_POINT:
+		if (ieee80211_vif_is_mesh(&sdata->vif)) {
+			/* allmulti is always set on mesh ifaces */
+			atomic_dec(&local->iff_allmultis);
+			ieee80211_stop_mesh(sdata);
+		}
+		/* fall through */
+	default:
+		if (local->scan_sdata == sdata) {
+			if (!local->ops->hw_scan)
+				cancel_delayed_work_sync(&local->scan_work);
+			/*
+			 * The software scan can no longer run now, so we can
+			 * clear out the scan_sdata reference. However, the
+			 * hardware scan may still be running. The complete
+			 * function must be prepared to handle a NULL value.
+			 */
+			local->scan_sdata = NULL;
+			/*
+			 * The memory barrier guarantees that another CPU
+			 * that is hardware-scanning will now see the fact
+			 * that this interface is gone.
+			 */
+			smp_mb();
+			/*
+			 * If software scanning, complete the scan but since
+			 * the scan_sdata is NULL already don't send out a
+			 * scan event to userspace -- the scan is incomplete.
+			 */
+			if (local->sw_scanning)
+				ieee80211_scan_completed(&local->hw);
+		}
+
+		conf.vif = &sdata->vif;
+		conf.type = sdata->vif.type;
+		conf.mac_addr = dev->dev_addr;
+		/* disable all keys for as long as this netdev is down */
+		ieee80211_disable_keys(sdata);
+		local->ops->remove_interface(local_to_hw(local), &conf);
+	}
+
+	sdata->bss = NULL;
+
+	if (local->open_count == 0) {
+		if (netif_running(local->mdev))
+			dev_close(local->mdev);
+
+		if (local->ops->stop)
+			local->ops->stop(local_to_hw(local));
+
+		ieee80211_led_radio(local, 0);
+
+		flush_workqueue(local->hw.workqueue);
+
+		tasklet_disable(&local->tx_pending_tasklet);
+		tasklet_disable(&local->tasklet);
+	}
+
+	return 0;
+}
+
+static void ieee80211_set_multicast_list(struct net_device *dev)
+{
+	struct ieee80211_sub_if_data *sdata = IEEE80211_DEV_TO_SUB_IF(dev);
+	struct ieee80211_local *local = sdata->local;
+	int allmulti, promisc, sdata_allmulti, sdata_promisc;
+
+	allmulti = !!(dev->flags & IFF_ALLMULTI);
+	promisc = !!(dev->flags & IFF_PROMISC);
+	sdata_allmulti = !!(sdata->flags & IEEE80211_SDATA_ALLMULTI);
+	sdata_promisc = !!(sdata->flags & IEEE80211_SDATA_PROMISC);
+
+	if (allmulti != sdata_allmulti) {
+		if (dev->flags & IFF_ALLMULTI)
+			atomic_inc(&local->iff_allmultis);
+		else
+			atomic_dec(&local->iff_allmultis);
+		sdata->flags ^= IEEE80211_SDATA_ALLMULTI;
+	}
+
+	if (promisc != sdata_promisc) {
+		if (dev->flags & IFF_PROMISC)
+			atomic_inc(&local->iff_promiscs);
+		else
+			atomic_dec(&local->iff_promiscs);
+		sdata->flags ^= IEEE80211_SDATA_PROMISC;
+	}
+
+	dev_mc_sync(local->mdev, dev);
+}
 
+static void ieee80211_if_setup(struct net_device *dev)
+{
+	ether_setup(dev);
+	dev->hard_start_xmit = ieee80211_subif_start_xmit;
+	dev->wireless_handlers = &ieee80211_iw_handler_def;
+	dev->set_multicast_list = ieee80211_set_multicast_list;
+	dev->change_mtu = ieee80211_change_mtu;
+	dev->open = ieee80211_open;
+	dev->stop = ieee80211_stop;
+	dev->destructor = free_netdev;
+	/* we will validate the address ourselves in ->open */
+	dev->validate_addr = NULL;
+}
 /*
  * Called when the netdev is removed or, by the code below, before
  * the interface type changes.
@@ -31,17 +565,17 @@ static void ieee80211_teardown_sdata(struct net_device *dev)
 	int flushed;
 	int i;
 
-	ieee80211_debugfs_remove_netdev(sdata);
-
 	/* free extra data */
 	ieee80211_free_keys(sdata);
 
+	ieee80211_debugfs_remove_netdev(sdata);
+
 	for (i = 0; i < IEEE80211_FRAGMENT_MAX; i++)
 		__skb_queue_purge(&sdata->fragments[i].skb_list);
 	sdata->fragment_next = 0;
 
 	switch (sdata->vif.type) {
-	case IEEE80211_IF_TYPE_AP:
+	case NL80211_IFTYPE_AP:
 		beacon = sdata->u.ap.beacon;
 		rcu_assign_pointer(sdata->u.ap.beacon, NULL);
 		synchronize_rcu();
@@ -53,23 +587,23 @@ static void ieee80211_teardown_sdata(struct net_device *dev)
 		}
 
 		break;
-	case IEEE80211_IF_TYPE_MESH_POINT:
-		/* Allow compiler to elide mesh_rmc_free call. */
+	case NL80211_IFTYPE_MESH_POINT:
 		if (ieee80211_vif_is_mesh(&sdata->vif))
-			mesh_rmc_free(dev);
-		/* fall through */
-	case IEEE80211_IF_TYPE_STA:
-	case IEEE80211_IF_TYPE_IBSS:
+			mesh_rmc_free(sdata);
+		break;
+	case NL80211_IFTYPE_STATION:
+	case NL80211_IFTYPE_ADHOC:
 		kfree(sdata->u.sta.extra_ie);
 		kfree(sdata->u.sta.assocreq_ies);
 		kfree(sdata->u.sta.assocresp_ies);
 		kfree_skb(sdata->u.sta.probe_resp);
 		break;
-	case IEEE80211_IF_TYPE_WDS:
-	case IEEE80211_IF_TYPE_VLAN:
-	case IEEE80211_IF_TYPE_MNTR:
+	case NL80211_IFTYPE_WDS:
+	case NL80211_IFTYPE_AP_VLAN:
+	case NL80211_IFTYPE_MONITOR:
 		break;
-	case IEEE80211_IF_TYPE_INVALID:
+	case NL80211_IFTYPE_UNSPECIFIED:
+	case __NL80211_IFTYPE_AFTER_LAST:
 		BUG();
 		break;
 	}
@@ -82,55 +616,43 @@ static void ieee80211_teardown_sdata(struct net_device *dev)
  * Helper function to initialise an interface to a specific type.
  */
 static void ieee80211_setup_sdata(struct ieee80211_sub_if_data *sdata,
-				  enum ieee80211_if_types type)
+				  enum nl80211_iftype type)
 {
-	struct ieee80211_if_sta *ifsta;
-
 	/* clear type-dependent union */
 	memset(&sdata->u, 0, sizeof(sdata->u));
 
 	/* and set some type-dependent values */
 	sdata->vif.type = type;
+	sdata->dev->hard_start_xmit = ieee80211_subif_start_xmit;
+	sdata->wdev.iftype = type;
 
 	/* only monitor differs */
 	sdata->dev->type = ARPHRD_ETHER;
 
 	switch (type) {
-	case IEEE80211_IF_TYPE_AP:
+	case NL80211_IFTYPE_AP:
 		skb_queue_head_init(&sdata->u.ap.ps_bc_buf);
 		INIT_LIST_HEAD(&sdata->u.ap.vlans);
 		break;
-	case IEEE80211_IF_TYPE_MESH_POINT:
-	case IEEE80211_IF_TYPE_STA:
-	case IEEE80211_IF_TYPE_IBSS:
-		ifsta = &sdata->u.sta;
-		INIT_WORK(&ifsta->work, ieee80211_sta_work);
-		setup_timer(&ifsta->timer, ieee80211_sta_timer,
-			    (unsigned long) sdata);
-		skb_queue_head_init(&ifsta->skb_queue);
-
-		ifsta->capab = WLAN_CAPABILITY_ESS;
-		ifsta->auth_algs = IEEE80211_AUTH_ALG_OPEN |
-			IEEE80211_AUTH_ALG_SHARED_KEY;
-		ifsta->flags |= IEEE80211_STA_CREATE_IBSS |
-			IEEE80211_STA_AUTO_BSSID_SEL |
-			IEEE80211_STA_AUTO_CHANNEL_SEL;
-		if (ieee80211_num_regular_queues(&sdata->local->hw) >= 4)
-			ifsta->flags |= IEEE80211_STA_WMM_ENABLED;
-
+	case NL80211_IFTYPE_STATION:
+	case NL80211_IFTYPE_ADHOC:
+		ieee80211_sta_setup_sdata(sdata);
+		break;
+	case NL80211_IFTYPE_MESH_POINT:
 		if (ieee80211_vif_is_mesh(&sdata->vif))
 			ieee80211_mesh_init_sdata(sdata);
 		break;
-	case IEEE80211_IF_TYPE_MNTR:
+	case NL80211_IFTYPE_MONITOR:
 		sdata->dev->type = ARPHRD_IEEE80211_RADIOTAP;
 		sdata->dev->hard_start_xmit = ieee80211_monitor_start_xmit;
 		sdata->u.mntr_flags = MONITOR_FLAG_CONTROL |
 				      MONITOR_FLAG_OTHER_BSS;
 		break;
-	case IEEE80211_IF_TYPE_WDS:
-	case IEEE80211_IF_TYPE_VLAN:
+	case NL80211_IFTYPE_WDS:
+	case NL80211_IFTYPE_AP_VLAN:
 		break;
-	case IEEE80211_IF_TYPE_INVALID:
+	case NL80211_IFTYPE_UNSPECIFIED:
+	case __NL80211_IFTYPE_AFTER_LAST:
 		BUG();
 		break;
 	}
@@ -139,7 +661,7 @@ static void ieee80211_setup_sdata(struct ieee80211_sub_if_data *sdata,
 }
 
 int ieee80211_if_change_type(struct ieee80211_sub_if_data *sdata,
-			     enum ieee80211_if_types type)
+			     enum nl80211_iftype type)
 {
 	ASSERT_RTNL();
 
@@ -160,14 +682,16 @@ int ieee80211_if_change_type(struct ieee80211_sub_if_data *sdata,
 	ieee80211_setup_sdata(sdata, type);
 
 	/* reset some values that shouldn't be kept across type changes */
-	sdata->basic_rates = 0;
+	sdata->bss_conf.basic_rates =
+		ieee80211_mandatory_rates(sdata->local,
+			sdata->local->hw.conf.channel->band);
 	sdata->drop_unencrypted = 0;
 
 	return 0;
 }
 
 int ieee80211_if_add(struct ieee80211_local *local, const char *name,
-		     struct net_device **new_dev, enum ieee80211_if_types type,
+		     struct net_device **new_dev, enum nl80211_iftype type,
 		     struct vif_params *params)
 {
 	struct net_device *ndev;
@@ -225,9 +749,9 @@ int ieee80211_if_add(struct ieee80211_local *local, const char *name,
 
 	if (ieee80211_vif_is_mesh(&sdata->vif) &&
 	    params && params->mesh_id_len)
-		ieee80211_if_sta_set_mesh_id(&sdata->u.sta,
-					     params->mesh_id_len,
-					     params->mesh_id);
+		ieee80211_sdata_set_mesh_id(sdata,
+					    params->mesh_id_len,
+					    params->mesh_id);
 
 	list_add_tail_rcu(&sdata->list, &local->interfaces);
 
@@ -241,15 +765,13 @@ int ieee80211_if_add(struct ieee80211_local *local, const char *name,
 	return ret;
 }
 
-void ieee80211_if_remove(struct net_device *dev)
+void ieee80211_if_remove(struct ieee80211_sub_if_data *sdata)
 {
-	struct ieee80211_sub_if_data *sdata = IEEE80211_DEV_TO_SUB_IF(dev);
-
 	ASSERT_RTNL();
 
 	list_del_rcu(&sdata->list);
 	synchronize_rcu();
-	unregister_netdevice(dev);
+	unregister_netdevice(sdata->dev);
 }
 
 /*