aboutsummaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2007-08-27[MIPS] Malta: Include <linux/irq.h for cp0_compare_irq / cp0_perfcount_irq.Ralf Baechle
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2007-08-27[MIPS] SMP: Scatter __cpuinit over the code as needed.Ralf Baechle
MIPS doesn't do CPU hotplugging yet but since many of the functions don't even have an __init let's fix this right. Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2007-08-27[MIPS] SEAD: Don't mark as experimental.Ralf Baechle
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2007-08-27[MIPS] remove unused marvell.hYoichi Yuasa
Signed-off-by: Yoichi Yuasa <yoichi_yuasa@tripeaks.co.jp> Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2007-08-27[MIPS] remove unused gt64240.hYoichi Yuasa
Signed-off-by: Yoichi Yuasa <yoichi_yuasa@tripeaks.co.jp> Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2007-08-27[MIPS] SNI: remove unused pcimt_scache.cYoichi Yuasa
Signed-off-by: Yoichi Yuasa <yoichi_yuasa@tripeaks.co.jp> Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2007-08-27[MIPS] SNI: Remove unneeded sni_machine_haltYoichi Yuasa
Signed-off-by: Yoichi Yuasa <yoichi_yuasa@tripeaks.co.jp> Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2007-08-27[MIPS] Remove dead code from irq_txx9.cAtsushi Nemoto
Signed-off-by: Atsushi Nemoto <anemo@mba.ocn.ne.jp> Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2007-08-27[MIPS] Do not discard extra debugging sections.Daniel Jacobowitz
Leaving these sections is useful to some tools that look at the image, and none of them are loaded into memory. The .mdebug.abi64 section, in particular, lets GDB recognize vmlinux.32 as an N64 program instead of guessing that it is O32. Signed-off-by: Daniel Jacobowitz <dan@codesourcery.com> Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2007-08-27[MIPS] Update defconfigs for TX39/TX49Atsushi Nemoto
Update defconfigs, disabling CONFIG_EXPERIMENTAL. Signed-off-by: Atsushi Nemoto <anemo@mba.ocn.ne.jp> Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2007-08-27[MIPS] Use -Werror on TX39/TX49 boardsAtsushi Nemoto
Now these directories can be built cleanly. Signed-off-by: Atsushi Nemoto <anemo@mba.ocn.ne.jp> Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2007-08-27[MIPS] Drop unneeded config options for RBTX4938Atsushi Nemoto
Signed-off-by: Atsushi Nemoto <anemo@mba.ocn.ne.jp> Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2007-08-27[MIPS] Cleanup TX39/TX49 irq codeAtsushi Nemoto
Cleanup jmr3927, tx4927 and tx4938 irq codes, using common IRQ_CPU, I8259 and IRQ_TXX9 irq routines. Signed-off-by: Atsushi Nemoto <anemo@mba.ocn.ne.jp> Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2007-08-27[MIPS] The irq_chip for TX39/TX49 SoCsAtsushi Nemoto
Add generic irq_chip for TX39/TX49 SoCs. This can be replace jmr3927_irq_irc, tx4927_irq_pic_type and tx4938_irq_pic_type. Signed-off-by: Atsushi Nemoto <anemo@mba.ocn.ne.jp> Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2007-08-27[MIPS] Sibyte: CONFIG_SIBYTE_SB1250_DUART -> CONFIG_SERIAL_SB1250_DUARTRalf Baechle
This is needed since the Sibyte serial driver was exchanged. Issue report by Imre Kaloz <kaloz@openwrt.org>. Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2007-08-27[MIPS] Fix au1xxx_gpio_direction_* return valueYoichi Yuasa
Signed-off-by: Yoichi Yuasa <yoichi_yuasa@tripeaks.co.jp> Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2007-08-27[MIPS] Remove unused pnx8550 KconfigYoichi Yuasa
Signed-off-by: Yoichi Yuasa <yoichi_yuasa@tripeaks.co.jp> Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2007-08-27[MIPS] Kconfig: Enable 64BIT_PHYS_ADDR only through select.Ralf Baechle
The user should not have to have any clue about this setting. Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2007-08-27[MIPS] SMTC: Fix secondary VPE interrupt mask initialization.Ralf Baechle
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2007-08-27[MIPS] Compute PGD_ORDER from the select page size.Ralf Baechle
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2007-08-27[MIPS] Extract {PGD,PMD,PTE}_ORDER into asm-offset.hRalf Baechle
For debugging purposes only. Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2007-08-27[MIPS] Fix computation of {PGD,PMD,PTE}_T_LOG2.Ralf Baechle
For the generation of asm-offset.h to work these need to be evaulatable by gcc as a constant expression. This issue did exist for a while but didn't bite because they're only in asm-offset.h for debugging purposes. Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2007-08-27[MIPS] Fix computation of PGDIR_SHIFT for 16K pagesize on 32-bit kernels.Ralf Baechle
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2007-08-25sched: s/sched_latency/sched_min_granularityIngo Molnar
runtime limit and wakeup granularity used to be a function of granularity and that was incorrect changed to sched_latency. Fix this to make wakeup granularity a function of min-granularity, and the runtime limit equal to latency. Signed-off-by: Ingo Molnar <mingo@elte.hu>
2007-08-25Merge git://git.kernel.org/pub/scm/linux/kernel/git/mingo/linux-2.6-schedLinus Torvalds
* git://git.kernel.org/pub/scm/linux/kernel/git/mingo/linux-2.6-sched: sched: cleanup, sched_granularity -> sched_min_granularity sched: adaptive scheduler granularity sched: fix CONFIG_SCHED_DEBUG dependency of lockdep sysctls
2007-08-25Merge branch 'for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/ieee1394/linux1394-2.6 * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/ieee1394/linux1394-2.6: firewire: Add ref-counting for sbp2 orbs (fix command abortion) firewire: fix unloading of fw-ohci while devices are attached ieee1394: sbp2: fix sbp2_remove_device for error cases
2007-08-25sched: cleanup, sched_granularity -> sched_min_granularityIngo Molnar
due to adaptive granularity scheduling the role of sched_granularity has changed to "minimum granularity", so rename the variable (and the tunable) accordingly. Signed-off-by: Ingo Molnar <mingo@elte.hu> Signed-off-by: Peter Zijlstra <a.p.zijlstra@chello.nl>
2007-08-25sched: adaptive scheduler granularityPeter Zijlstra
Instead of specifying the preemption granularity, specify the wanted latency. By fixing the granlarity to a constany the wakeup latency it a function of the number of running tasks on the rq. Invert this relation. sysctl_sched_granularity becomes a minimum for the dynamic granularity computed from the new sysctl_sched_latency. Then use this latency to do more intelligent granularity decisions: if there are fewer tasks running then we can schedule coarser. This helps performance while still always keeping the latency target. Signed-off-by: Peter Zijlstra <a.p.zijlstra@chello.nl> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2007-08-25sched: fix CONFIG_SCHED_DEBUG dependency of lockdep sysctlsPeter Zijlstra
Make the lockdep sysctls not depend on CONFIG_SCHED_DEBUG. Signed-off-by: Peter Zijlstra <a.p.zijlstra@chello.nl> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2007-08-25firewire: Add ref-counting for sbp2 orbs (fix command abortion)Kristian Høgsberg
This handles the case where we get the status write before getting the complete_transaction callback ("status write for unknown orb"). In this case, we just assume that the initial orb pointer transaction succeeded and finish the orb. To prevent the transaction callback from touching freed memory, we ref-count the orb structures. Signed-off-by: Kristian Høgsberg <krh@redhat.com> Signed-off-by: Stefan Richter <stefanr@s5r6.in-berlin.de>
2007-08-25firewire: fix unloading of fw-ohci while devices are attachedStefan Richter
Fix panic in run_timer_softirq right after "modprobe -r firewire-ohci" if a FireWire disk was attached and firewire-sbp2 loaded. Signed-off-by: Stefan Richter <stefanr@s5r6.in-berlin.de>
2007-08-25ieee1394: sbp2: fix sbp2_remove_device for error casesStefan Richter
Bug found by Olaf Hering <olh@suse.de>: sbp2util_remove_command_orb_pool requires a valid lu->hi pointer. Signed-off-by: Stefan Richter <stefanr@s5r6.in-berlin.de>
2007-08-25Merge branch 'agp-patches' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/airlied/agp-2.6 * 'agp-patches' of git://git.kernel.org/pub/scm/linux/kernel/git/airlied/agp-2.6: agp: balance ioremap checks agp: Add device id for P4M900 to via-agp module efficeon-agp leaks 'struct agp_bridge_data' in error paths of agp_efficeon_probe()
2007-08-25Merge branch 'drm-patches' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/airlied/drm-2.6 * 'drm-patches' of git://git.kernel.org/pub/scm/linux/kernel/git/airlied/drm-2.6: drm: ioremap return value checks drm/via: Fix dmablit when blit queue is full drm_rmmap_ioctl(): remove dead code
2007-08-25Merge branch 'upstream-linus' of ↵Linus Torvalds
master.kernel.org:/pub/scm/linux/kernel/git/jgarzik/netdev-2.6 * 'upstream-linus' of master.kernel.org:/pub/scm/linux/kernel/git/jgarzik/netdev-2.6: myri10ge: update driver version to 1.3.2-1.269 myri10ge: use pcie_get/set_readrq ehea: fix queue destructor ehea: fix module parameter description ehea: fix interface to DLPAR tools sgiseeq: Fix return type of sgiseeq_remove sky2 1.17 sky2: only bring up watchdog if link is active sky2: clear PCI power control reg at startup DM9000: fix interface hang under load phy layer: fix genphy_setup_forced (don't reset) Don't use GFP_DMA for zone allocation. fix realtek phy id in forcedeth
2007-08-25Merge branch 'release' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/lenb/linux-acpi-2.6 * 'release' of git://git.kernel.org/pub/scm/linux/kernel/git/lenb/linux-acpi-2.6: (30 commits) ACPI: work around duplicate name "VID" problem on T61 acpiphp_ibm: add missing '\n' to error message ACPI: add dump_stack() to trace acpi_format_exception programming errors make drivers/acpi/scan.c:create_modalias() static ACPI: Fix a warning of discarding qualifiers from pointer target type ACPI: "ACPI handle has no context!" should be KERN_DEBUG ACPI video hotkey: export missing ACPI video hotkey events via input layer ACPI: Validate XSDT, use RSDT if XSDT fails ACPI: /proc/acpi/thermal_zone trip points are now read-only, mark them as such ACPI: fix ia64 allnoconfig build PNP: remove null pointer checks PNP: remove MODULE infrastructure ISAPNP: removed unused isapnp_detected and ISAPNP_DEBUG PNPACPI: remove unnecessary casts of "void *" PNPACPI: simplify irq_flags() PNP: fix up after Lindent ACPI: enable GPEs before calling _WAK on resume asus-laptop: Fix rmmod of asus_laptop sony-laptop: call sonypi_compat_init earlier sony-laptop: enable Vaio FZ events ...
2007-08-25drm: ioremap return value checksScott Thompson
Signed-off-by: Scott Thompson <postfail <at> hushmail.com> Signed-off-by: Dave Airlie <airlied@linux.ie>
2007-08-25agp: balance ioremap checksScott Thompson
patchset against 2.6.23-rc3. corrects missing ioremap return checks and balancing on iounmap calls, integrated changes per list recommendations on the original set of patches.. Signed-off-by: Scott Thompson <postfail <at> hushmail.com> Signed-off-by: Dave Airlie <airlied@linux.ie>
2007-08-25agp: Add device id for P4M900 to via-agp moduleXavier Bachelot
Signed-off-by: Dave Airlie <airlied@linux.ie>
2007-08-25myri10ge: update driver version to 1.3.2-1.269Brice Goglin
Update myri10ge driver version to 1.3.2-1.269. Signed-off-by: Brice Goglin <brice@myri.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2007-08-25myri10ge: use pcie_get/set_readrqBrice Goglin
Based on a patch from Peter Oruba, convert myri10ge to use pcie_get_readrq() and pcie_set_readrq() instead of our own PCI calls and arithmetics. These driver changes incorporate the proposed PCI-X / PCI-Express read byte count interface. Reading and setting those values doesn't take place "manually", instead wrapping functions are called to allow quirks for some PCI bridges. Signed-off-by: Brice Goglin <brice@myri.com> Signed-off by: Peter Oruba <peter.oruba@amd.com> Based on work by Stephen Hemminger <shemminger@linux-foundation.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2007-08-25ehea: fix queue destructorJan-Bernd Themann
Includes hcp_epas_dtor in eq/cq/qp destructors to unmap HW register. Signed-off-by: Jan-Bernd Themann <themann@de.ibm.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2007-08-25ehea: fix module parameter descriptionJan-Bernd Themann
Update the module parameter description of "use_mcs" to show correct default value Signed-off-by: Jan-Bernd Themann <themann@de.ibm.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2007-08-25ehea: fix interface to DLPAR toolsJan-Bernd Themann
Userspace DLPAR tool expects decimal numbers to be written to and read from sysfs entries. Signed-off-by: Jan-Bernd Themann <themann@de.ibm.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2007-08-25sgiseeq: Fix return type of sgiseeq_removeRalf Baechle
The driver remove method needs to return an int not void. This was just never noticed because usually this driver is not being built as a module. Signed-off-by: Ralf Baechle <ralf@linux-mips.org> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2007-08-25sky2 1.17Stephen Hemminger
Mark new version to track if current driver is in use. Signed-off-by: Stephen Hemminger <shemminger@linux-foundation.org> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2007-08-25sky2: only bring up watchdog if link is activeStephen Hemminger
This fixes the extra timer overhead that people were whining about as a 2.6.23 regression. Running the watchdog timer all the time is unneeded. Change it to run only if link is up, and reduce frequency to save power. Signed-off-by: Stephen Hemminger <shemminger@linux-foundation.org> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2007-08-25sky2: clear PCI power control reg at startupStephen Hemminger
Make sure PCI register for PHY power gets cleared on boot, and make sure to avoid any PCI posting problems. Signed-off-by: Stephen Hemminger <shemminger@linux-foundation.org> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2007-08-25DM9000: fix interface hang under loadFlorian Westphal
When transferring data at full speed, the DM9000 network interface sometimes stops sending/receiving data. Worse, ksoftirqd consumes 100% cpu and the net tx watchdog never triggers. Fix by spin_lock_irqsave() in dm9000_start_xmit() to prevent the interrupt handler from interfering. Signed-off-by: Florian Westphal <fw@strlen.de> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2007-08-25phy layer: fix genphy_setup_forced (don't reset)Domen Puncer
Writing BMCR_RESET bit will reset MII_BMCR to default values. This is clearly not what we want. Signed-off-by: Domen Puncer <domen.puncer@telargo.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
generated by cgit v1.2.3 (git 2.25.1) at 2024-07-15 19:04:52 +0000