aboutsummaryrefslogtreecommitdiff
path: root/arch/arm/plat-mxc
AgeCommit message (Collapse)Author
2008-10-09Merge branch 'for-rmk' of ↵Russell King
git://pasiphae.extern.pengutronix.de/git/imx/linux-2.6.git Merge branch 'imx-devel' into devel
2008-10-09Merge branch 'ptebits' into develRussell King
Conflicts: arch/arm/Kconfig
2008-09-09MX2: Add DMA support for mx2 and (eventually) mx1Sascha Hauer
This patch adds DMA support for Freescale i.MX27 SoCs. It is derived from the i.MX1 port and should (though currently untested) still be working for the i.MX1. Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
2008-09-09MXC: Remove WD IRQ priority settingDarius Augulis
Remove WD IRQ priority setting from ARCH_MXC common init code, because it's application specific. Signed-off-by: Darius Augulis <augulis.darius@gmail.com> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
2008-09-09i.MX3: Fix compiler warningsLuotao Fu
Fix some base address declaration by adding a cast. Signed-off-by: Luotao Fu <l.fu@pengutronix.de> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
2008-09-09MXC: add RTCK alternate function definitionsLuotao Fu
This one adds definitions to configure RTCK pad (PE16) in primary and alternate function. The RTCK Pin is used by one wire master controller and as JTAG Clock return. Signed-off-by: Luotao Fu <l.fu@pengutronix.de> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
2008-09-09mxc: add cscr register defintionsLuotao Fu
This adds macros to get CSCR upper, lower and additional registers. These registers are needed to configure a chip select line. The offset layouts of these Registers are identical on mx27 and mx31, hence we can use the macros in generic way Signed-off-by: Luotao Fu <l.fu@pengutronix.de> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
2008-09-09MX31: add macros to configure spi pinsLuotao Fu
this adds convenience values usable by mxc_iomux_mode() to configure Pins of the spi interfaces on mx31. Signed-off-by: Luotao Fu <l.fu@pengutronix.de> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
2008-09-09MXC: Lets handle IRQ by priority, defined with exported API functionDarius Augulis
Signed-off-by: Darius Augulis <augulis.darius@gmail.com> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
2008-09-09i.MX31ADS: Add CPLD interrupts demultiplexing (take 3).Gilles Chanteperdrix
Needed for 8250 serial port and CS89x0 ethernet interface. Signed-off-by: Gilles Chanteperdrix <gilles.chanteperdrix@xenomai.org> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
2008-09-09i.MX27: add definitions for USB pinsSascha Hauer
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
2008-09-09MXC: add convenience function to register platform devicesSascha Hauer
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
2008-09-06[ARM] Convert asm/io.h to linux/io.hRussell King
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2008-09-04[ARM] remove unused #include <version.h>Huang Weiyi
The driver(s) below do not use LINUX_VERSION_CODE nor KERNEL_VERSION. arch/arm/plat-mxc/clock.c This patch removes the said #include <version.h>. Signed-off-by: Huang Weiyi <weiyi.huang@gmail.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2008-08-07[ARM] Move include/asm-arm/arch-* to arch/arm/*/include/machRussell King
This just leaves include/asm-arm/plat-* to deal with. Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2008-08-07[ARM] Remove asm/hardware.h, use asm/arch/hardware.h insteadRussell King
Remove includes of asm/hardware.h in addition to asm/arch/hardware.h. Then, since asm/hardware.h only exists to include asm/arch/hardware.h, update everything to directly include asm/arch/hardware.h and remove asm/hardware.h. Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2008-07-27[ARM] 5179/1: Replace obsolete IRQT_* and __IRQT_* values with IRQ_TYPE_*Dmitry Baryshkov
IRQT_* and __IRQT_* were obsoleted long ago by patch [3692/1]. Remove them completely. Sed script for the reference: s/__IRQT_RISEDGE/IRQ_TYPE_EDGE_RISING/g s/__IRQT_FALEDGE/IRQ_TYPE_EDGE_FALLING/g s/__IRQT_LOWLVL/IRQ_TYPE_LEVEL_LOW/g s/__IRQT_HIGHLVL/IRQ_TYPE_LEVEL_HIGH/g s/IRQT_RISING/IRQ_TYPE_EDGE_RISING/g s/IRQT_FALLING/IRQ_TYPE_EDGE_FALLING/g s/IRQT_BOTHEDGE/IRQ_TYPE_EDGE_BOTH/g s/IRQT_LOW/IRQ_TYPE_LEVEL_LOW/g s/IRQT_HIGH/IRQ_TYPE_LEVEL_HIGH/g s/IRQT_PROBE/IRQ_TYPE_PROBE/g s/IRQT_NOEDGE/IRQ_TYPE_NONE/g Signed-off-by: Dmitry Baryshkov <dbaryshkov@gmail.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2008-07-05i.MX2 family: Add basic mach supportJuergen Beisert
This patch adds basic mach support for the mx2 processor family, based on the original freescale code and adapted to mainline kernel coding style. This part adds the global build only. Signed-off-by: Juergen Beisert <j.beisert@pengutronix.de>
2008-07-05i.MX2 family: Add GPIO multiplexing supportJuergen Beisert
This patch adds GPIO multiplexing support for the imx1/mxc2 family of procesors. Signed-off-by: Juergen Beisert <j.beisert@pengutronix.de>
2008-07-05MXC arch: Simplify architecture's irq sourcesJuergen Beisert
Simplify architecture's irq headers and sources, to share these files between MXC3 and MXC2. Signed-off-by: Juergen Beisert <j.beisert@pengutronix.de>
2008-07-05i.MXC family: Adding timer supportJuergen Beisert
This patch adds timer support for the i.MX machine family. This code can be used on the following machs: - i.MX1 (tested) - i.MX2 (i.MX21 (to be tested), i.MX27 (tested)) - i.MX3 (i.MX31 (tested)) TODO: It seems impossible to build a kernel for more than one CPU because the timer do not follow the platform device rules. So it does only work if timer 1 can be accessed on all CPUs at the same address. Signed-off-by: Juergen Beisert <j.beisert@pengutronix.de> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
2008-07-05MXC arch: Add gpio support for the whole platformJuergen Beisert
This patch bases on the one from Daniel Mack. The most important change to Daniel's patch is to be more generic. This gpio routine supports at least the i.MX27 and i.MX31 processors. Signed-off-by: Juergen Beisert <j.beisert@pengutronix.de> Acked-by: Daniel Mack <daniel@caiaq.de>
2008-07-05MXC family: Add clock handlingJuergen Beisert
Internal clock path handling for the mxc CPUs. Changed against the original Freescale code (and against clocklib for example): - clock rate is always calculated whenever one ask for the current rate (means struct clk has no more a member called "rate"). So switching the PLL base frequency will propagate immediately to all other clocks that are depending on this frequency. Signed-off-by: Juergen Beisert <j.beisert@pengutronix.de>
2008-04-17[ARM] 4887/1: i.MXC family: Separate current platform codeRobert Schwebel
From: Juergen Beisert <j.beisert@pengutronix.de> This patch separates the current code into i.MX2 and i.MX3 and modifies the Kconfig files to reflect this separation in the menus. Things happend since last review: - make i.MX3 compile again - fix some structure names to be conform with all the shared/common sources from i.MX1/i.MX2 Previous changes: - stay conform to other Kconfig files (note from Russell King) Signed-off-by: Juergen Beisert <j.beisert@pengutronix.de> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2008-03-31[ARM] 4877/1: i.MXC family: Clean up current platform codeRobert Schwebel
From: Juergen Beisert <j.beisert@pengutronix.de> This patch cleans up the in-kernel platform code from doxygen comments. We don't know how this could have leak in, but anyway. Changes since last release: - none Signed-off-by: Juergen Beisert <j.beisert@pengutronix.de> Signed-off-by: Ross Wille <wille@freescale.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2007-07-22[ARM] 4461/1: MXC platform and i.MX31ADS core supportQuinn Jensen
This patch adds the foundation pieces for the Freescale MXC platforms, including i.MX2 and i.MX3 based systems. The bare-bones MX31 support in this patch boots to the rootdev panic with 8250 serial console configured "console=ttyS0,115200". It assumes that Redboot is the boot loader. Signed-off-by: Quinn Jensen <quinn.jensen@freescale.com> Acked-by: Lennert Buytenhek <buytenh@wantstofly.org> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
generated by cgit v1.2.3 (git 2.25.1) at 2024-11-25 05:39:24 +0000