| Age | Commit message (Collapse) | Author |
|---|
|
Signed-off-by: Jonas Bonn <jonas.bonn@gmail.com>
|
|
This file was moved in the big file move, but some OpenMoko specific
changes did not make it. This patch peels out the relevant bits and
adds them to the gpio.h file in the upstream location.
The only OpenMoko specific change is the definition of gpio_to_irq and
irq_to_gpio. These functions should really be defined in gpio_chip and
asm-generic/gpio.h; this is coming soon, but until then we'll just use
the Moko definitions that we've been using up until now.
This is not strictly correct for the GTA02 case, but it works given
the configuration that's currently in use. This can be fixed (and
should become evident) when the configuration options are cleaned up.
Signed-off-by: Jonas Bonn <jonas.bonn@gmail.com>
|
|
This file is OpenMoko specific and didn't get moved in the big file
move. Move it to arch/arm/mach-s3c2410/include/mach where it belongs
and fix the references to it.
Signed-off-by: Jonas Bonn <jonas.bonn@gmail.com>
|
|
This patch removes a large number of #ifdefs that switch on machine
model. Where applicable, the machine_is_* idiom is favoured; this
mainly makes the code easier to read, but it does have some other
advantages, too.
Signed-off-by: Jonas Bonn <jonas.bonn@gmail.com>
|
|
Problems building with GTA01 disabled in config come down to not selecting the
common CONFIG for GTAXX with GTA02, and GTA01-specific gps stuff.
Signed-off-by: Andy Green <andy@openmoko.com>
|
|
Signed-off-by: Andy Green <andy@openmoko.com>
|
|
Delete old configs in stable-tracking, move defconfig-2.6.27 to the common config site
arch/arm/configs/gta02-moredrivers-defconfig
Signed-off-by: Andy Green <andy@openmoko.com>
|
|
Don't change bt regulator at all if already at requested state, and
turn it to opposite on | off state before changing regulator voltage
and setting final state.
Signed-off-by: Sean McNeil <sean@mcneil.com>
|
|
Move to level from edge, fix local_save... to local_irq...
simplify bitbang sequence
Signed-off-by: Sean McNeil <sean@mcneil.com>
|
|
FIQ is back up again, changed the stack to point to the post FIQ-vector
area, remove various meddlings needed to try to fix it.
Signed-off-by: Andy Green <andy@openmoko.com>
|
|
Thomas White noticed that the recent patch from Andrzej cleaning up a
nasty cast in the resume_dependency stuff for Glamo broke resume. The
problem was that the wrong resume callback was arrived at by the new
code, the one in the device's device_driver struct rather than the
struct platform_driver that actually holds the right pointer.
Since this code will be gone in 2.6.26, I reverted this part of Andrzej's
patch, tidying the cast a bit anyway.
Reported-by: Thomas White <taw27@cam.ac.uk>
Signed-off-by: Andy Green <andy@openmoko.com>
|
|
Signed-off-by: Andy Green <andy@openmoko.com>
|
|
I'm not sure if this patch if complete/correct, but it seems to fix the
clock problem.
Via: http://marc.info/?l=linux-arm-kernel&m=122322617931931&w=2
|
|
Recent patches from Jonas Bonn seemed to need this addition to compile,
it can be because it was rebased earlier today.
Signed-off-by: Andy Green <andy@openmoko.com>
|
|
This makes the GTA02 work with the new-style WM8753 ALSA I2C driver.
Signed-off-by: Jonas Bonn <jonas.bonn@gmail.com>
|
|
Signed-off-by: Jonas Bonn <jonas.bonn@gmail.com>
|
|
These fixes are required to build without MACH_NEO1973_GTA02
Signed-off-by: Jonas Bonn <jonas.bonn@gmail.com>
|
|
I2C devices should be registered with i2c_register_board_info in the machine
setup code. This allows the devices to be auto-probed when the requred driver
is loaded.
Signed-off-by: Jonas Bonn <jonas.bonn@gmail.com>
|
|
I hit this when updating to 2.6.26. Also if CONFIG_MMC is enabled this
patch converts this horrible horrible hack into a horrible hack by using
dev->resume() (untested).
Signed-off-by: Andrzej Zaborowski <balrog@zabor.org>
|
|
Signed-off-by: Andy Green <andy@openmoko.com>
|
|
Some boots from Qi trigger a symptom from this interesting race -->
[ 2.730000] Unable to handle kernel NULL pointer dereference at virtual address 00000248
[ 2.730000] pgd = c0004000
[ 2.735000] [00000248] *pgd=00000000
[ 2.735000] Internal error: Oops: 5 [#1] PREEMPT
[ 2.735000] Modules linked in:
[ 2.735000] CPU: 0 Not tainted (2.6.24-stable10_0c1587137aaf0ee3-mokodev #1071)
[ 2.735000] PC is at pcf50633_voltage_set+0x1c/0xfc
[ 2.735000] LR is at gta02_glamo_mmc_set_power+0xdc/0x128
[ 2.735000] pc : [<c01df570>] lr : [<c0034324>] psr: 60000013
[ 2.735000] sp : c7c57eb0 ip : c7c57ec8 fp : c7c57ec4
[ 2.735000] r10: c7cfca28 r9 : 00000000 r8 : c7c57f68
[ 2.735000] r7 : c7cfca68 r6 : c7cfcae0 r5 : 00000c80 r4 : 00000000
[ 2.735000] r3 : 00000000 r2 : 00000c80 r1 : 0000000a r0 : 00000c80
[ 2.735000] Flags: nZCv IRQs on FIQs on Mode SVC_32 ISA ARM Segment kernel
[ 2.735000] Control: c000717f Table: 30004000 DAC: 00000017
[ 2.735000] Process kmmcd (pid: 102, stack limit = 0xc7c56268)
[ 2.735000] Stack: (0xc7c57eb0 to 0xc7c58000)
[ 2.735000] 7ea0: c0608c58 00000c80 c7c57edc c7c57ec8
[ 2.735000] 7ec0: c0034324 c01df564 c7cfca28 c7cfc800 c7c57f1c c7c57ee0 c0194de0 c0034258
[ 2.735000] 7ee0: c7c57f34 c7c57ef0 c01e6230 c005de5c 60000013 c7cfca28 c7cfc800 60000013
[ 2.735000] 7f00: c7cfca68 c7c57f68 00000000 c01e6778 c7c57f34 c7c57f20 c01e5d68 c0194da8
[ 2.735000] 7f20: c7cfc800 c7cfca08 c7c57f5c c7c57f38 c01e6810 c01e5cbc c0059278 c7c57f48
[ 2.735000] 7f40: c02d2ba0 00000002 c7c44420 c7c56000 c7c57f9c c7c57f60 c00592e0 c01e6788
[ 2.735000] 7f60: 00000002 c0059278 c0608d74 c04321cc c036e16c 00000000 c7c57fb0 c7c44420
[ 2.735000] 7f80: c7c56000 00000000 00000000 00000000 c7c57fd4 c7c57fa0 c005a068 c00591ec
[ 2.735000] 7fa0: c02d0624 00000000 c7c4c0e0 c005dc2c c7c57fb0 c7c57fb0 00000000 c7c56000
[ 2.735000] 7fc0: c7c44420 c0059f84 c7c57ff4 c7c57fd8 c005db28 c0059f94 00000000 00000000
[ 2.735000] 7fe0: 00000000 00000000 00000000 c7c57ff8 c004b170 c005dad8 ffffffff ffffffff
[ 2.735000] Backtrace:
[ 2.735000] [<c01df554>] (pcf50633_voltage_set+0x0/0xfc) from [<c0034324>] (gta02_glamo_mmc_set_power+0xdc/0x128)
[ 2.735000] r5:00000c80 r4:c0608c58
[ 2.735000] [<c0034248>] (gta02_glamo_mmc_set_power+0x0/0x128) from [<c0194de0>] (glamo_mci_set_ios+0x48/0x254)
[ 2.735000] r5:c7cfc800 r4:c7cfca28
[ 2.735000] [<c0194d98>] (glamo_mci_set_ios+0x0/0x254) from [<c01e5d68>] (mmc_power_up+0xbc/0x100)
[ 2.735000] [<c01e5cac>] (mmc_power_up+0x0/0x100) from [<c01e6810>] (mmc_rescan+0x98/0x1a8)
[ 2.735000] r5:c7cfca08 r4:c7cfc800
[ 2.735000] [<c01e6778>] (mmc_rescan+0x0/0x1a8) from [<c00592e0>] (run_workqueue+0x104/0x208)
[ 2.735000] r6:c7c56000 r5:c7c44420 r4:00000002
[ 2.735000] [<c00591dc>] (run_workqueue+0x0/0x208) from [<c005a068>] (worker_thread+0xe4/0xf8)
[ 2.735000] [<c0059f84>] (worker_thread+0x0/0xf8) from [<c005db28>] (kthread+0x60/0x94)
[ 2.735000] r6:c0059f84 r5:c7c44420 r4:c7c56000
[ 2.735000] [<c005dac8>] (kthread+0x0/0x94) from [<c004b170>] (do_exit+0x0/0x6f4)
[ 2.735000] r6:00000000 r5:00000000 r4:00000000
[ 2.735000] Code: e351000a e1a04000 e1a00002 8a000032 (e5943248)
[ 2.745000] ---[ end trace 123ec1d286354824 ]---
This problem was caused by insufficient timeout waiting for pcf50633 to resume
and broken code to detect timeout exhaustion.
Although I'd like to think it has something to do with mmc resume woes it should make a panic
and subsequent emergency spew on UART2 if that had been the case.
Took the opportunity to move the stuff to show completion of probe to later in the
pcf50633 probe and tighten readiness test.
Signed-off-by: Andy Green <andy@openmoko.com>
|
|
fix-accel-irq-mismatch.patch
I just found a while to start doing something cool with the
accelerometers but I hit #1613 (both accelerometer nodes can't be read
concurrently for longer than a moment). Turns out to be very silly.
I'll continue the cool stuff another day,
Cheers
|
|
Subject: [PATCH] [gta02] Disable hardware ECC unless we get instructed to enable it
This is restoring the old behavior in regard to ECC. Even if
hardware ECC was compiled in we didn't use it. Make this a runtime
option. If the bootloader passes hardware_ecc we will enable the
hardware ECC for real.
|
|
Fix spelling error on function name
Signed-off-by: Simon Kagstrom <simon.kagstrom@gmail.com>
|
|
Signed-off-by: Andy Green <andy@openmoko.com>
|
|
Signed-off-by: Andy Green <andy@openmoko.com>
|
|
This cleans out some random externs in C files that checkpatch does not like
and introduces a couple of .h files to contain them. Plus some other minor
checkpatch style complaints.
Signed-off-by: Andy Green <andy@openmoko.com>
|
|
Set the UART FIFO to trigger earlier on the GTA01 device to minimize
UART overruns from the GSM.
Signed-off-by: Mike Westerhof <mwester@dls.net>
|
|
This patch adds the gta01 backlight callback that defers the
restoring of the backlight until after the jbt driver has
resumed. This doesn't eliminate the flashing of the LCD on
the gta01, but it reduces it considerably.
Signed-off-by: Mike Westerhof <mwester@dls.net>
|
|
This patch ensures that no console data will go the UART while
the GSM mux is switched to the GSM. This is necessary despite
the code that disables the console due to the fact that the
console resumes before the neo1973_pm_gsm driver, and consoles
always resume in the "on" state.
Signed-off-by: Mike Westerhof <mwester@dls.net>
|
|
Add the basic GSM flowcontrol code.
Signed-off-by: Mike Westerhof <mwester@dls.net>
|
|
Signed-off-by: Andy Green <andy@openmoko.com>
|
|
Signed-off-by: Andy Green <andy@openmoko.com>
|
|
Signed-off-by: Andy Green <andy@openmoko.com>
|
|
Signed-off-by: Andy Green <andy@openmoko.com>
|
|
Signed-off-by: Andy Green <andy@openmoko.com>
|
|
This patch uses the new glamo-mci slow clock ratio
patch in order to dynamically reduce SD Card clock
rate when the GPS unit is powered on GTA02.
Signed-off-by: Andy Green <andy@openmoko.com>
|
|
Until now we just drove the SD Card at 3.3V all the time. But in
fact we can do better, and use a voltage negotiated with the
SD Card itself.
With the shipping 512MB Sandisk SD Card, 2.7V is negotiated which
gives 1.7dBm reduction in power on all the SD Card lines and should
further reduce GPS perturbation during SD Card usage.
Signed-off-by: Andy Green <andy@openmoko.com>
|
|
Charger trigger stuff goes and asks for POWER_SUPPLY_PROP_STATUS
to figure out what the charger state is. But until now, we only
reported there what we found out from HDQ, and the HDQ registers
are not updated very often in the coulomb counter, it can be 4
or more second lag before it tells us about what it experiences.
When we react to USB insertion and only after 500ms debounce tell
power_supply stuff that something changed, it most times will
see old pre-USB-insertion state from bq27000 over HDQ at that time
and will report it ain't charging, buggering up the LED trigger
tracking.
This patch maintains distance between bq27000 and pcf50633 by
having platform callbacks in bq27000 that it can use to ask about
definitive charger "online" presence and "activity", whether the
charger says it is charging. If these callbacks are implemented
(and we implement them in this patch up in mach_gta02.c) then
this information is used in preference to what is found from
HDQ.
Result is if you set the LED trigger like this:
echo bat-charging > /sys/devices/platform/gta02-led.0/leds/gta02-aux:red/trigger
then it lights up properly on USB insertion now, goes away on
removal properly, as as far as I saw, when charging stops too.
Signed-off-by: Andy Green <andy@openmoko.com>
|
|
Suggested-by: Sean McNeil <sean@mcneil.com>
To see if some subtle race is involved, Sean has tried
removing syslog traffic during resume and found he was
not seeing the resume crash any more. We're giving it
a try to see if it changes the behaviour for anyone
else. It would mean we have a pretty fine race in there
somewhere.
Signed-off-by: Andy Green <andy@openmoko.com>
|
|
A few questions have been flying around about how optimal
our waitstates are for various things including Glamo.
This patch introduces new sysfs nodes
/sys/devices/platform/neo1973-memconfig.0/BANKCON0
...
/sys/devices/platform/neo1973-memconfig.0/BANKCON7
If you cat them you get translated info about bus speed on
that chip select, eg,
# cat /sys/devices/platform/neo1973-memconfig.0/BANKCON1
BANKCON1 = 0x00000A40
Type = ROM / SRAM
PMC = normal (1 data)
Tacp = 2 clocks
Tcah = 0 clocks
Tcoh = 1 clock
Tacc = 3 clocks
Tcos = 1 clock
Tacs = 0 clocks
You can write them in hex too
# echo 0x200 > /sys/devices/platform/neo1973-memconfig.0/BANKCON1
The write format for BANKCON0 - 5 looks like this
b1..b0 PMC Page Mode Config
b3..b2 Tacp Page Mode Access Cycle
b5..b4 Tcah Address hold after CS deasserted
b7..b6 Tcoh CS hold after OE deasserted
b10..b8 Tacc Access Cycle Period
b12..b11 Tcos CS setup before OE asserted
b14..b13 Tacs Address setup before CS asserted
BANKCON 6 and 7 have two extra bits
b16..b15 MT Memory type (00=ROM/SRAM, 11=DRAM)
If it's ROM/SRAM, the rest of the bits are as described above.
For DRAM
b1..b0 SCAN Column address number
b3..b2 RAS to CAS delay
The patch is intended to let people experiement on their own. But
of course you will crash things for sure if the timing is wrong, and
you can also trash SD Card data if you make Glamo unstable, so remove
it or remount ro first. Other horrible things are possible, but
because the settings aren't sticky, you should always be able to
recover by either normal reboot usually or at worst NOR boot and then
dfu. Most likely you will just crash your session and have to reboot
if your settings are bad, but consider yourself warned bad things are
possible. :-)
Signed-off-by: Andy Green <andy@openmoko.com>
|
|
During the suspend current reduction campaign on suspend I
forced the GPS UART to be GPIO and to drive 0 into the GPS
unit so we would not burn current there. On resume it lets
the pins act as UARTs again. But really, we should do this
all the time that the GPS unit is off, lest we leak it
enough power to hold internal state and make trouble.
Signed-off-by: Andy Green <andy@openmoko.com>
|
|
Subject: [PATCH] [pcf50633] Avoid ooops on start with inserted usb cable
The pcf50633_global might not be initialized when we get the first
usb interrupt. We would oops inside the dev_err because we made up
a struct device.
Signed-Off-By: Holger Freyther <zecke@openmoko.org>
|
|
Add missing initialization for the touchscreen driver for the
gta01 platform.
Signed-off-by: Mike Westerhof <mwester@dls.net>
|
|
Signed-off-by: Mike Westerhof <mwester@dls.net>
|
|
Signed-off-by: Matt Hsu <matt_hsu@openmoko.org>
- add an interrupt for ar6k wifi module
|
|
Signed-off-by: Andy Green <andy@openmoko.com>
|
|
Subject: [PATCH] [battery] Make the bq27000 send an uevent when the charging state possible changed
Remove the todo entries from the pcf50633, make the mach-gta02
call the bq27000 driver from the pmu callback.
|
|
Subject: [PATCH] Hacky CONFIG_NO_IDLE_HZ (dyn-tick) support for S3C24xx.
|
|
Signed-off-by: Andy Green <andy@openmoko.com>
|
