aboutsummaryrefslogtreecommitdiff
path: root/drivers/input/keyboard
AgeCommit message (Collapse)Author
2008-03-20Input: pxa27x - fix keypad KPC macrosSamuel Ortiz
We want to mask (key_number - 1), not key_number. The current implementation works fine for all values but the maximum one, i.e. 8. Signed-off-by: Samuel Ortiz <sameo@openedhand.com> Acked-by: Eric Miao <eric.miao@marvell.com> Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
2008-01-31Input: pxa27x_keypad - also enable on PXA3xxEric Miao
Signed-off-by: Eric Miao <eric.miao@marvell.com> Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
2008-01-31Input: pxa27x_keypad - add debounce_interval to the keypad platform dataEric Miao
Currently, only one debounce_interval is introduced for both direct and matrix keys. This is true in most cases, although the keypad controller supports different debounce for direct/matrix keys. Some platforms do require this to be tuned, instead of the default reset value of 100ms. Rotary encoder will always use zero debounce time for now to achieve certain sensitivity. Signed-off-by: Eric Miao <eric.miao@marvell.com> Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
2008-01-31Input: pxa27x_keypad - use device resources for I/O memory mapping and IRQEric Miao
1. use ioremap() for registers access, this improves the portability of the driver (e.g. same IP on different processor with different I/O memory range), and make it possible to remove those registers definition in pxa-regs.h as PXA is undergoing a clean-up of that header file 2. use device specific IRQ instead of hardcoded IRQ_KEYPAD, same reason as above 3. clean up the error handling path in _probe() 4. remove DRIVER_NAME and use pdev->name when necessary, we don't actually need a constant string literals Signed-off-by: Eric Miao <eric.miao@marvell.com> Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
2008-01-31Input: pxa27x_keypad - enable rotary encoders and direct keysEric Miao
1. Rotary encoder events can be configured either as relative events as the legacy code does or as any specified key code, this is useful on some platform which uses the rotary keys as KEY_{UP/DOWN/LEFT/RIGHT} 2. Add support for direct keys, the corresponding keycodes for each direct key can now be specified within the platform data 3. Remove the direct/rotary key detection code from the IRQ handler to dedicated functions to improve readability Signed-off-by: Eric Miao <eric.miao@marvell.com> Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
2008-01-31Input: pxa27x_keypad - introduce pxa27x_keypad_config()Eric Miao
Introduce pxa27x_keypad_config() for keypad registers configuration and remove the reg_kpc, reg_kprec from platform data structure so that configurations of keypad registers can be centralized to a single function. It can also be re-used when resuming. Signed-off-by: Eric Miao <eric.miao@marvell.com> Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
2008-01-31Input: pxa27x_keypad - introduce driver structure and use KEY() to define ↵Eric Miao
matrix keys 1. Introduce the "struct pxa27x_keypad" structure for driver specific information, such as "struct clk", generated matrix key codes and so on 2. Use KEY() macro to define matrix keys, instead of original 8x8 map this makes definition easier with keypad where keys are sparse 3. Keep a generated array in "struct pxa27x_keypad" for fast lookup 4. Separate the matrix scan into a dedicated function for readability and report only those keys whose state has been changed, instead of report all states 5. Make use of KPAS to decide the faster path if only one key has been detected Signed-off-by: Eric Miao <eric.miao@marvell.com> Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
2008-01-31Input: pxa27x_keypad - remove pin configuration from the driverEric Miao
The pin configurations will slowly be moved to the board specific code at initialization thus to make the driver more generic. Signed-off-by: Eric Miao <eric.miao@marvell.com> Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
2008-01-31Input: pxa27x_keypad - rename the driver (was pxa27x_keyboard)Eric Miao
The controller should really be called keypad, and also align the naming of functions and structures to use "pxa27x_keypad" as prefix, instead of "pxakbd". Signed-off-by: Eric Miao <eric.miao@marvell.com> Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
2008-01-21Input: remove duplicate includesAndre Haupt
Signed-off-by: Andre Haupt <andre@bitwigglers.org> Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
2008-01-21Input: add Tosa keyboard driverDmitry Baryshkov
Add keyboard support on tosa (Sharp Zaurus SL-6000x). Largely based on patches by Dirk Opfer. Signed-off-by: Dmitry Baryshkov <dbaryshkov@gmail.com> Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
2008-01-21Input: drop redundant includes of moduleparam.hJulia Lawall
Drop #include <linux/moduleparam.h> in files that also include linux/module.h, since module.h includes moduleparam.h already. Signed-off-by: Julia Lawall <julia@diku.dk> Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
2008-01-21Input: atkbd - remove unneeded synchronize_sched()Dmitry Torokhov
atkbd_disable() provides all necessary synchronization with atkbd_interrupt(). Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
2008-01-21Input: atkbd - properly handle special keys on Dell LatitudesGiel de Nijs
Most of Fn+F? special keys on (at least) the Dell Latitude laptops don't generate a hardware key release event so the driver has to generate one. Signed-off-by: Giel de Nijs <giel@caffeinetrip.com> Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
2008-01-14Input: improve Kconfig help entries for HP Jornada devicesKristoffer Ericson
Signed-off-by: Kristoffer Ericson <kristoffer.ericson@gmail.com> Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
2008-01-03Input: spitzkbd - fix suspend key handlingRichard Purdie
The spitz keyboard driver reports KEY_SUSPEND events but doesn't register its use of this event in the keybit bitfield, breaking input events for this key. This patch fixes that by registering the key in the keybit bitfield. Signed-off-by: Richard Purdie <rpurdie@rpsys.net> Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
2007-12-14Input: jornada680_kbd - fix default keymapKristoffer Ericson
This patch fixes the HP Jornada 6xx keyboard default keymap which had some bad keymap values. This resulted in wrong key being returned when pressed (for example, key 'y' returned 'r'). Also, while we are at it lets arrange the include files in alphabetical order. Signed-off-by: Kristoffer Ericson <kristoffer.ericson@gmail.com> Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
2007-11-27Input: bf54x-keys - keypad does not exist on BF544 partsMike Frysinger
Signed-off-by: Mike Frysinger <michael.frysinger@analog.com> Signed-off-by: Bryan Wu <bryan.wu@analog.com> Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
2007-11-21Input: gpio-keys - request and configure GPIOsHerbert Valerio Riedel
Currently, gpio_keys.c assumes the GPIOs to be already properly configured; this patch changes gpio-keys to perform explicit calls to gpio_request() and gpio_configure_input(). This matches the behaviour of leds-gpio. Signed-off-by: Herbert Valerio Riedel <hvr@gnu.org> Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
2007-10-22Merge branch 'for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input: Input: appletouch - apply idle reset logic to all touchpads Input: usbtouchscreen - add support for GoTop tablet devices Input: bf54x-keys - return real error when request_irq() fails Input: i8042 - export i8042_command()
2007-10-22Input: bf54x-keys - return real error when request_irq() failsMichael Hennerich
Signed-off-by: Michael Hennerich <michael.hennerich@analog.com> Signed-off-by: Bryan Wu <bryan.wu@analog.com> Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
2007-10-19Convert files to UTF-8 and some cleanupsJan Engelhardt
* Convert files to UTF-8. * Also correct some people's names (one example is Eißfeldt, which was found in a source file. Given that the author used an ß at all in a source file indicates that the real name has in fact a 'ß' and not an 'ss', which is commonly used as a substitute for 'ß' when limited to 7bit.) * Correct town names (Goettingen -> Göttingen) * Update Eberhard Mönkeberg's address (http://lkml.org/lkml/2007/1/8/313) Signed-off-by: Jan Engelhardt <jengelh@gmx.de> Signed-off-by: Adrian Bunk <bunk@kernel.org>
2007-10-19get rid of input BIT* duplicate definesJiri Slaby
get rid of input BIT* duplicate defines use newly global defined macros for input layer. Also remove includes of input.h from non-input sources only for BIT macro definiton. Define the macro temporarily in local manner, all those local definitons will be removed further in this patchset (to not break bisecting). BIT macro will be globally defined (1<<x) Signed-off-by: Jiri Slaby <jirislaby@gmail.com> Cc: <dtor@mail.ru> Acked-by: Jiri Kosina <jkosina@suse.cz> Cc: <lenb@kernel.org> Acked-by: Marcel Holtmann <marcel@holtmann.org> Cc: <perex@suse.cz> Acked-by: Mauro Carvalho Chehab <mchehab@infradead.org> Cc: <vernux@us.ibm.com> Cc: <malattia@linux.it> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-10-15Merge branch 'devel' of master.kernel.org:/home/rmk/linux-2.6-armLinus Torvalds
* 'devel' of master.kernel.org:/home/rmk/linux-2.6-arm: (95 commits) [ARM] 4578/1: CM-x270: PCMCIA support [ARM] 4577/1: ITE 8152 PCI bridge support [ARM] 4576/1: CM-X270 machine support [ARM] pxa: Avoid pxa_gpio_mode() in gpio_direction_{in,out}put() [ARM] pxa: move pxa_set_mode() from pxa2xx_mainstone.c to mainstone.c [ARM] pxa: move pxa_set_mode() from pxa2xx_lubbock.c to lubbock.c [ARM] pxa: Make cpu_is_pxaXXX dependent on configuration symbols [ARM] pxa: PXA3xx base support [NET] smc91x: fix PXA DMA support code [SERIAL] Fix console initialisation ordering [ARM] pxa: tidy up arch/arm/mach-pxa/Makefile [ARM] Update arch/arm/Kconfig for drivers/Kconfig changes [ARM] 4600/1: fix kernel build failure with build-id-supporting binutils [ARM] 4599/1: Preserve ATAG list for use with kexec (2.6.23) [ARM] Rename consistent_sync() as dma_cache_maint() [ARM] 4572/1: ep93xx: add cirrus logic edb9307 support [ARM] 4596/1: S3C2412: Correct IRQs for SDI+CF and add decoding support [ARM] 4595/1: ns9xxx: define registers as void __iomem * instead of volatile u32 [ARM] 4594/1: ns9xxx: use the new gpio functions [ARM] 4593/1: ns9xxx: implement generic clockevents ...
2007-10-15Merge branch 'for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input: (40 commits) Input: use full RCU API Input: remove tsdev interface Input: add support for Blackfin BF54x Keypad controller Input: appletouch - another fix for idle reset logic HWMON: hdaps - switch to using input-polldev Input: add support for SEGA Dreamcast keyboard Input: omap-keyboard - don't pretend we support changing keymap Input: lifebook - fix X and Y axis range Input: usbtouchscreen - add support for GeneralTouch devices Input: fix open count handling in input interfaces Input: keyboard - add CapsShift lock Input: adbhid - produce all CapsLock key events Input: ALPS - add signature for ThinkPad R61 Input: jornada720_kbd - send MSC_SCAN events Input: add support for the HP Jornada 7xx (710/720/728) touchscreen Input: add support for HP Jornada 7xx onboard keyboard Input: add support for HP Jornada onboard keyboard (HP6XX) Input: ucb1400_ts - use schedule_timeout_uninterruptible Input: xpad - fix dependancy on LEDS class Input: auto-select INPUT for MAC_EMUMOUSEBTN option ... Resolved conflicts manually in drivers/hwmon/applesmc.c: converting from a class device to a device and converting to use input-polldev created a few apparently trivial clashes..
2007-10-15Atari keyboard: incorporate additional review commentsGeert Uytterhoeven
Atari keyboard: incorporate additional review comments: o Kill reference to source file name o Return error value from input_register_device() instead of -ENOMEM Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org> Cc: Dmitry Torokhov <dmitry.torokhov@gmail.com> Cc: Michael Schmitz <schmitz@biophys.uni-duesseldorf.de> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-10-13m68k: Atari input drivers cleanupGeert Uytterhoeven
m68k: Atari input drivers cleanup: - memleak on failed init/register of input devices fixed - correct keycodes table (Atari keycodes are almost, but not entirely, equal to Linux keycodes). Signed-off-by: Michael Schmitz <schmitz@biophys.uni-duesseldorf.de> Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-10-13Input: add support for Blackfin BF54x Keypad controllerMichael Hennerich
Signed-off-by: Michael Hennerich <michael.hennerich@analog.com> Signed-off-by: Bryan Wu <bryan.wu@analog.com> Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
2007-10-12Merge master.kernel.org:/pub/scm/linux/kernel/git/torvalds/linux-2.6Dmitry Torokhov
Conflicts: drivers/macintosh/adbhid.c
2007-10-12Input: add support for SEGA Dreamcast keyboardAdrian McMenamin
Signed-off by: Adrian McMenamin <adrian@mcmen.demon.co.uk> Acked-by: Arjan van de Ven <arjan@linux.intel.com> Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
2007-10-12[ARM] pxa: update pxa27x keypad driver to use clk supportRussell King
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2007-10-12Input: omap-keyboard - don't pretend we support changing keymapDmitry Torokhov
The driver's keymap is a mix of hardware codes and keycodes and so may not be used with default implementations of getkeycode() and setkeycode(). Also some whitespace cleanup. Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
2007-10-11Input: jornada720_kbd - send MSC_SCAN eventsDmitry Torokhov
Send MSC_SCAN events to userspace to ease task of adjusting keymap. Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
2007-09-26Input: add support for HP Jornada 7xx onboard keyboardKristoffer Ericson
The driver supports onboard keyboards of HP Jornada 710/720/728 Signed-off-by: Kristoffer Ericson <kristoffer.ericson@gmail.com> Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
2007-09-26Input: add support for HP Jornada onboard keyboard (HP6XX)Kristoffer Ericson
Signed-off-by: Kristoffer Ericson <kristoffer.ericson@gmail.com> Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
2007-09-26Input: gpio-keys - add suspend/resume supportAnti Sullin
This patch adds suspend/resume support and enables wakeup from gpio_keys buttons. Signed-off-by: Anti Sullin <anti.sullin@artecdesign.ee> Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
2007-09-26Input: gpio_keys - verify that supplied GPIO numbers are validAnti Sullin
As David Brownell pointed out, gpio_keys driver does not check return code of gpio_to_irq(). This patch adds the gpio_to_irq return code check to gpio_keys and moves the IRQ edge type setting to request_irq flags to avoid changing the irq type before we have confirmed we can use it. Signed-off-by: Anti Sullin <anti.sullin@artecdesign.ee> Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
2007-07-23Input: gpio_keys - remove duplicate includesJesper Juhl
Signed-off-by: Jesper Juhl <jesper.juhl@gmail.com> Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
2007-07-10Input: pxa27x_keyboard - fix compile errorMike Rapoport
Signed-off-by: Mike Rapoport <mike@compulab.co.il> Acked-by: Rodolfo Giometti <giometti@linux.it> Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
2007-07-10Input: atkbd - change mapping for e032 from KEY_WWW to KEY_HOMEPAGEHans de Goede
WWW/Homepage key on Microsoft-compatible keyboards generates KEY_WWW when connected via PS/2 port but KEY_HOMEPAGE when connected via USB. This patch changes mapping in atkbd to match one in HID driver. Signed-off-by: Hans de Goede <j.w.r.degoede@hhs.nl> Acked-by: Vojtech Pavlik <vojtech@suse.cz> Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
2007-07-05Merge branch 'for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input: Input: document some of keycodes Input: add a new EV_SW SW_RADIO event, for radio switches on laptops Input: serio - take drv_mutex in serio_cleanup() Input: atkbd - use printk_ratelimit for spurious ACK messages Input: atkbd - throttle LED switching Input: i8042 - add HP Pavilion ZT1000 to the MUX blacklist
2007-06-28Input: atkbd - use printk_ratelimit for spurious ACK messagesQi Yong
Signed-off-by: Qi Yong <qiyong@mail.fc-cn.com> Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
2007-06-28Input: atkbd - throttle LED switchingDmitry Torokhov
On some boxes keyboard controllers are too slow to withstand continuous flow of requests to turn keyboard LEDs on and off and start losing some keypresses or even all of them. Delay executing of LED switching request if we had another one within 50 ms thus easing load on the controller. Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
2007-06-20x86_64: Quieten Atari keyboard warnings in KconfigAndi Kleen
Not directly related to x86, but I got tired of seeing these warnings on every kconfig update when building on a non m68k box: drivers/input/keyboard/Kconfig:170:warning: 'select' used by config symbol 'KEYBOARD_ATARI' refers to undefined symbol 'ATARI_KBD_CORE' drivers/input/mouse/Kconfig:182:warning: 'select' used by config symbol 'MOUSE_ATARI' refers to undefined symbol 'ATARI_KBD_CORE' I moved the definition of ATARI_KBD_CORE into drivers/input/keyboard/Kconfig so it's always seen by Kconfig. Cc: Geert Uytterhoeven <geert@linux-m68k.org> Acked-by: Roman Zippel <zippel@linux-m68k.org> Signed-off-by: Andi Kleen <ak@suse.de> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-06-05[ARM] pxa: fix pxa27x keyboard driverRussell King
CKEN macro definitions no longer contains the bit number; remove it from usages in the pxa27x keyboard driver. Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2007-05-08Merge git://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux-2.6Dmitry Torokhov
2007-05-04Merge branch 'for-linus' of ↵Linus Torvalds
master.kernel.org:/pub/scm/linux/kernel/git/dtor/input * 'for-linus' of master.kernel.org:/pub/scm/linux/kernel/git/dtor/input: (65 commits) Input: gpio_keys - add support for switches (EV_SW) Input: cobalt_btns - convert to use polldev library Input: add skeleton for simple polled devices Input: update some documentation Input: wistron - fix typo in keymap for Acer TM610 Input: add input_set_capability() helper Input: i8042 - add Fujitsu touchscreen/touchpad PNP IDs Input: i8042 - add Panasonic CF-29 to nomux list Input: lifebook - split into 2 devices Input: lifebook - add signature of Panasonic CF-29 Input: lifebook - activate 6-byte protocol on select models Input: lifebook - work properly on Panasonic CF-18 Input: cobalt buttons - separate device and driver registration Input: ati_remote - make button repeat sensitivity configurable Input: pxa27x - do not use deprecated SA_INTERRUPT flag Input: ucb1400 - make delays configurable Input: misc devices - switch to using input_dev->dev.parent Input: joysticks - switch to using input_dev->dev.parent Input: touchscreens - switch to using input_dev->dev.parent Input: mice - switch to using input_dev->dev.parent ... Fixed up conflicts with core device model removal of "struct subsystem" manually. Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-05-04hilkbd: Kill compiler warning and fix comment dyslexiaGeert Uytterhoeven
hilkbd: Kill compiler warning and fix comment dyslexia Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-05-04m68k: Atari keyboard and mouse support.Michael Schmitz
Atari keyboard and mouse support. (reformating and Kconfig fixes by Roman Zippel) Signed-off-by: Michael Schmitz <schmitz@debian.org> Signed-off-by: Roman Zippel <zippel@linux-m68k.org> Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-05-03Input: aaed2000_kbd - convert to use polldev libraryDmitry Torokhov
Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
generated by cgit v1.2.3 (git 2.25.1) at 2024-07-05 12:43:30 +0000