aboutsummaryrefslogtreecommitdiff
path: root/drivers/input/keyboard
AgeCommit message (Collapse)Author
2010-01-15Merge branch 'for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input: Input: sentelic - fix left/right horizontal scroll mapping Input: pmouse - move Sentelic probe down the list Input: add compat support for sysfs and /proc capabilities output Input: i8042 - add Dritek quirk for Acer Aspire 5610. Input: xbox - do not use GFP_KERNEL under spinlock Input: psmouse - fix Synaptics detection when protocol is disabled Input: bcm5974 - report ABS_MT events Input: davinci_keyscan - add device_enable method to platform data Input: evdev - be less aggressive about sending SIGIO notifies Input: atkbd - fix canceling event_work in disconnect Input: serio - fix potential deadlock when unbinding drivers Input: gf2k - fix &&/|| confusion in gf2k_connect()
2010-01-06Input: davinci_keyscan - add device_enable method to platform dataMiguel Aguilar
Add a function pointer in the platform data of the DaVinci Keyscan driver called device_enable, in order to perform board specific actions when the device is initialized, like setup the PINMUX configuration. Signed-off-by: Miguel Aguilar <miguel.aguilar@ridgerun.com> Signed-off-by: Kevin Hilman <khilman@deeprootsystems.com> Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
2010-01-06Input: atkbd - fix canceling event_work in disconnectDmitry Torokhov
We need to first unregister input device and only then cancel event work since events can arrive (and cause event work to get scheduled again) until input_unregister_device() returns. Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
2010-01-06Input: serio - fix potential deadlock when unbinding driversEric W. Biederman
sysfs_remove_group() waits for sysfs attributes to be removed, therefore we do not need to worry about driver-specific attributes being accessed after driver has been detached from the device. In fact, attempts to take serio->drv_mutex in attribute methods may lead to the following deadlock: sysfs_read_file() fill_read_buffer() sysfs_get_active_two() psmouse_attr_show_helper() serio_pin_driver() serio_disconnect_driver() mutex_lock(&serio->drv_mutex); <--------> mutex_lock(&serio_drv_mutex); psmouse_disconnect() sysfs_remove_group(... psmouse_attr_group); .... sysfs_deactivate(); wait_for_completion(); Fix this by removing calls to serio_[un]pin_driver() and functions themselves and using driver-private mutexes to serialize access to attribute's set() methods that may change device state. Signed-off-by: Eric W. Biederman <ebiederm@xmission.com> Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
2009-12-31Merge branch 'for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input: Input: iforce - wait for command completion when closing the device Input: twl4030-pwrbutton - switch to using threaded IRQ Input: twl4030_keypad - switch to using threaded IRQ Input: lifebook - add CONFIG_DMI dependency Input: wistron - fix test for CONFIG_PM Input: psmouse - fix compile warning in hgpk module Input: matrix-keypad - handle cases when GPIOs can't be wakeup sources Input: iforce - fix oops on device disconnect Input: ff-memless - add notion of direction to for rumble effects Input: ff-memless - another fix for signed to unsigned overflow Input: ff-memless - start playing FF effects immediately Input: serio - do not mark kseriod freezable anymore Input: speed up suspend/shutdown for PS/2 mice and keyboards
2009-12-29Input: twl4030_keypad - switch to using threaded IRQFelipe Balbi
Signed-off-by: Felipe Balbi <felipe.balbi@nokia.com> Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
2009-12-24Input: matrix-keypad - handle cases when GPIOs can't be wakeup sourcesDmitry Torokhov
On certain boards not all GPIOs may be used as wakeup sources, in which case some of enable_irq_wake() calls will fail. On resume calling disable_irq_wake() will warn about unbalanced IRQ wake disable. Solve this by checking whether enable_irq_wake() succeeded or not and no not call disable_irq_wake() for these GPIOs/IRQs that have not been enabled. Reported-by: Pavel Machek <pavel@ucw.cz> Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
2009-12-24Input: speed up suspend/shutdown for PS/2 mice and keyboardsDmitry Torokhov
Instead of doing full-blown reset while suspending or shutting down the box use lighter form of reset that should take less time. Tested-by: Alan Stern <stern@rowland.harvard.edu> Tested-by: Rafael J. Wysocki <rjw@sisk.pl> Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
2009-12-16Merge branch 'for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input: (22 commits) Input: ALPS - add interleaved protocol support (Dell E6x00 series) Input: keyboard - don't override beep with a bell Input: altera_ps2 - fix test of unsigned in altera_ps2_probe() Input: add mc13783 touchscreen driver Input: ep93xx_keypad - update driver to new core support Input: wacom - separate pen from express keys on Graphire Input: wacom - add defines for data packet report IDs Input: wacom - add support for new LCD tablets Input: wacom - add defines for packet lengths of various devices Input: wacom - ensure the device is initialized properly upon resume Input: at32psif - do not sleep in atomic context Input: i8042 - add Gigabyte M1022M to the noloop list Input: i8042 - allow installing platform filters for incoming data Input: i8042 - fix locking in interrupt routine Input: ALPS - do not set REL_X/REL_Y capabilities on the touchpad Input: document use of input_event() function Input: sa1111ps2 - annotate probe() and remove() methods Input: ambakmi - annotate probe() and remove() methods Input: gscps2 - fix probe() and remove() annotations Input: altera_ps2 - add annotations to probe and remove methods ...
2009-12-15Input: ep93xx_keypad - update driver to new core supportH Hartley Sweeten
This driver was merged before the ep93xx core support was added for the keypad clock and acquiring/releasing the necessary gpio's. Now that the proper support is in the ep93xx core this driver needs to be updated to work correctly. Summary of changes: 1) Remove some unused members from the platform data. 2) Remove the custom KEY macro and use the ones available in <linux/input/matrix_keypad.h> 3) Remove the keypad_{readl/writel} macros and just use __raw_{readl/writel} directly. 4) Update the clk_set_rate() call to work with the core support. 5) Cleanup the probe routine and remove some unneeded messages. 6) Use the ep93xx core functions to acquire and release the gpio's. 7) Fix the clk_get() call to get the keypad clock. Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com> Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
2009-12-15const: constify remaining dev_pm_opsAlexey Dobriyan
Signed-off-by: Alexey Dobriyan <adobriyan@gmail.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-12-13mfd: Rename all twl4030_i2c*Balaji T K
This patch renames function names like twl4030_i2c_write_u8, twl4030_i2c_read_u8 to twl_i2c_write_u8, twl_i2c_read_u8 and also common variable in twl-core.c Signed-off-by: Rajendra Nayak <rnayak@ti.com> Signed-off-by: Balaji T K <balajitk@ti.com> Signed-off-by: Santosh Shilimkar <santosh.shilimkar@ti.com> Acked-by: Kevin Hilman <khilman@deeprootsystems.com> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2009-12-13mfd: Rename twl4030* driver files to enable re-useSantosh Shilimkar
The upcoming TWL6030 is companion chip for OMAP4 like the current TWL4030 for OMAP3. The common modules like RTC, Regulator creates opportunity to re-use the most of the code from twl4030. This patch renames few common drivers twl4030* files to twl* to enable the code re-use. Signed-off-by: Rajendra Nayak <rnayak@ti.com> Signed-off-by: Balaji T K <balajitk@ti.com> Signed-off-by: Santosh Shilimkar <santosh.shilimkar@ti.com> Acked-by: Kevin Hilman <khilman@deeprootsystems.com> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2009-12-13input/keyboard: new driver for ADP5520 MFD PMICsMichael Hennerich
Signed-off-by: Michael Hennerich <michael.hennerich@analog.com> Signed-off-by: Bryan Wu <cooloney@kernel.org> Signed-off-by: Mike Frysinger <vapier@gentoo.org> Acked-by: Dmitry Torokhov <dtor@mail.ru> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2009-12-09Merge branch 'for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input: (51 commits) Input: appletouch - give up maintainership Input: dm355evm_kbd - switch to using sparse keymap library Input: wistron_btns - switch to using sparse keymap library Input: add generic support for sparse keymaps Input: fix memory leak in force feedback core Input: wistron - remove identification strings from DMI table Input: psmouse - remove identification strings from DMI tables Input: atkbd - remove identification strings from DMI table Input: i8042 - remove identification strings from DMI tables DMI: allow omitting ident strings in DMI tables Input: psmouse - do not carry DMI data around Input: matrix-keypad - switch to using dev_pm_ops Input: keyboard - fix lack of locking when traversing handler->h_list Input: gpio_keys - scan gpio state at probe and resume time Input: keyboard - add locking around event handling Input: usbtouchscreen - add support for ET&T TC5UH touchscreen controller Input: xpad - add two new Xbox 360 devices Input: polled device - do not start polling if interval is zero Input: polled device - schedule first poll immediately Input: add S3C24XX touchscreen driver ...
2009-12-09Merge git://git.kernel.org/pub/scm/linux/kernel/git/lethal/sh-2.6Linus Torvalds
* git://git.kernel.org/pub/scm/linux/kernel/git/lethal/sh-2.6: (137 commits) sh: include empty zero page in romImage sh: Make associative cache writes fatal on all SH-4A parts. sh: Drop associative writes for SH-4 cache flushes. sh: Partial revert of copy/clear_user_highpage() optimizations. sh: Add default uImage rule for se7724, ap325rxa, and migor. sh: allow runtime pm without suspend/resume callbacks sh: mach-ecovec24: Remove un-defined settings for VPU sh: mach-ecovec24: LCDC drive ability become high sh: fix sh7724 VEU3F resource size serial: sh-sci: Fix too early port disabling. sh: pfc: pr_info() -> pr_debug() cleanups. sh: pfc: Convert from ctrl_xxx() to __raw_xxx() I/O routines. sh: Improve kfr2r09 serial port setup code sh: Break out SuperH PFC code sh: Move KEYSC header file sh: convert /proc/cpu/aligmnent, /proc/cpu/kernel_alignment to seq_file sh: Add CPG save/restore code for sh7724 R-standby sh: Add SDHI power control support to Ecovec mfd: Add power control platform data to SDHI driver sh: mach-ecovec24: modify address map ...
2009-12-04Input: atkbd - remove identification strings from DMI tableDmitry Torokhov
The driver does not reference identification strings in DMI table and since these strings are no longer required by DMI core we can safely remove them and save some memory. Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
2009-12-03Input: matrix-keypad - switch to using dev_pm_opsDmitry Torokhov
Acked-by: Rafael J. Wysocki <rjw@sisk.pl> Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
2009-12-02Merge commit 'v2.6.32' into nextDmitry Torokhov
2009-11-30Input: gpio_keys - scan gpio state at probe and resume timeDaniel Mack
We need to read and report gpio state when we bind the driver to the device and upon resume so that userspace has correct state of the switches (and keys but they are less important since, even if they are happened to be pressed, we'd expect them to be released fairly soon). Signed-off-by: Daniel Mack <daniel@caiaq.de> Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
2009-11-30sh: Move KEYSC header fileMagnus Damm
This patch moves the KEYSC header file from the SuperH specific asm directory to a place where it can be shared by multiple architectures. Signed-off-by: Magnus Damm <damm@opensource.se> Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2009-11-22Merge 7xx-iosplit-plat-merge with omap-fixesTony Lindgren
Merge branch '7xx-iosplit-plat-merge' into omap-for-linus
2009-11-20Input: gpio_keys - seperate individual button setup to make code neaterBen Dooks
Move the code that deals with setting up each individual button out into a new function to reduce the indentation and allow us to common up some of the error recovery code. Signed-off-by: Ben Dooks <ben@simtec.co.uk> Signed-off-by: Simtec Linux Team <linux@simtec.co.uk> Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
2009-11-20Input: gpio_keys - use <linux/gpio.h> instead of <asm/gpio.h>Ben Dooks
The gpio keys driver should be using <linux/gpio.h> instead of <asm/gpio.h> Signed-off-by: Ben Dooks <ben@simtec.co.uk> Signed-off-by: Simtec Linux Team <linux@simtec.co.uk> Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
2009-11-20Input: gpio_keys - use dev_ macros to report informationBen Dooks
The gpio_keys driver is binding to a platform device but using pr_err() to report errors. Change to using dev_err() so that all messages are prefixed by the device name. Signed-off-by: Ben Dooks <ben@simtec.co.uk> Signed-off-by: Simtec Linux Team <linux@simtec.co.uk> Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
2009-11-12Input: atkbd - restore LED state at reconnectDmitry Torokhov
Even though input core tells us to restore LED state and repeat rate at resume keyboard may be reconnected either by request from userspace (via sysfs) or just by pulling it from the box and plugging it back in. In these cases we still need to restore state ourselves. Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
2009-11-10Merge branch '7xx-iosplit-plat' with omap-fixesTony Lindgren
2009-11-05Merge commit 'v2.6.32-rc6' into nextDmitry Torokhov
2009-11-02Input: gpio-keys - use IRQF_SHAREDDmitry Eremin-Solenikov
There is nothing that disallows gpio-keys to share it's IRQ line w/ other drivers. Make it use IRQF_SHARED in request_irq(). An example of other driver with which I'd like to share IRQ line for GPIO buttons is ledtrig-gpio. Signed-off-by: Dmitry Eremin-Solenikov <dbaryshkov@gmail.com> Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
2009-11-02Merge commit 'v2.6.32-rc5' into for-linusDmitry Torokhov
2009-10-21Input: atkbd - add a quirk for OQO 01+ multimedia keysJamie Lentin
OQO 01+ multimedia keys produce 6x on press, e0 6x upon release. As a result, Linux thinks that another key has been pressed (or is repeating), when it is actually a release of the same key. Mangle the release scancode when running on OQO so that driver recognizes it as such. Since the device does not have external PS/2 ports mangling is safe since there is no chance that an external keyboard is connected. Signed-off-by: Jamie Lentin <jm@lentin.co.uk> Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
2009-10-20omap: headers: Move remaining headers from include/mach to include/platTony Lindgren
Move the remaining headers under plat-omap/include/mach to plat-omap/include/plat. Also search and replace the files using these headers to include using the right path. This was done with: #!/bin/bash mach_dir_old="arch/arm/plat-omap/include/mach" plat_dir_new="arch/arm/plat-omap/include/plat" headers=$(cd $mach_dir_old && ls *.h) omap_dirs="arch/arm/*omap*/ \ drivers/video/omap \ sound/soc/omap" other_files="drivers/leds/leds-ams-delta.c \ drivers/mfd/menelaus.c \ drivers/mfd/twl4030-core.c \ drivers/mtd/nand/ams-delta.c" for header in $headers; do old="#include <mach\/$header" new="#include <plat\/$header" for dir in $omap_dirs; do find $dir -type f -name \*.[chS] | \ xargs sed -i "s/$old/$new/" done find drivers/ -type f -name \*omap*.[chS] | \ xargs sed -i "s/$old/$new/" for file in $other_files; do sed -i "s/$old/$new/" $file done done for header in $(ls $mach_dir_old/*.h); do git mv $header $plat_dir_new/ done Signed-off-by: Tony Lindgren <tony@atomide.com>
2009-10-18Input: atkbd - consolidate force release quirks for volume keysHerton Ronaldo Krzesinski
Some machines share same key list for volume up/down release key quirks, use only one key list. Signed-off-by: Herton Ronaldo Krzesinski <herton@mandriva.com.br> Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
2009-10-14Input: atkbd - postpone restoring LED/repeat rate at resumeDmitry Torokhov
We need to postpone restoring LED state and typematic settings until keyboard is finished reconnecting upon resume. Normally driver core and PM infrastructure takes care of proper ordering and dependencies, but or case actual reconnect is done asynchronously from kseriod. So while driver core thinks that keyboard was resumed and it is time to let input core run it's resume handlers in reality keyboard is not ready yet. The solution is to keep rescheduling work that adjusts LED and rate settings until keyboard is fully enabled. Reported-by: Carlos R. Mafra <crmafra2@gmail.com> Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
2009-10-13Input: add DaVinci Keypad DriverMiguel Aguilar
This driver enables keypad support on DaVinci platforms. DM365 is the only platform that uses this driver at the moment. Signed-off-by: Miguel Aguilar <miguel.aguilar@ridgerun.com> Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
2009-10-13Input: lkkbd - change formatting style to match the rest of the kernelDmitry Torokhov
- no spaces between function name and opening parenthesis - switch statements were indented too much This makes checkpatch (and me) happy. Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
2009-10-13Input: atkbd - restore resetting LED state at startupDmitry Torokhov
Fix breakage caused by commit 9605fb48e1998935a5ee70c965f90ad1ac023add While the input core indeed takes care of restoring led state and typematic settings upon resume the driver still need to initialize them properly when registering a new device Reported-and-tested-by: Marin Mitov <mitov@issp.bas.bg> Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
2009-10-11headers: remove sched.h from interrupt.hAlexey Dobriyan
After m68k's task_thread_info() doesn't refer to current, it's possible to remove sched.h from interrupt.h and not break m68k! Many thanks to Heiko Carstens for allowing this. Signed-off-by: Alexey Dobriyan <adobriyan@gmail.com>
2009-09-23Merge branch 'for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input: Input: add driver for Atmel AT42QT2160 Sensor Chip Input: max7359 - use threaded IRQs Input: add driver for Maxim MAX7359 key switch controller Input: add driver for ADP5588 QWERTY I2C Keypad Input: add touchscreen driver for MELFAS MCS-5000 controller Input: add driver for OpenCores Keyboard Controller Input: dm355evm_keys - remove dm355evm_keys_hardirq Input: synaptics_i2c - switch to using __cancel_delayed_work() Input: ad7879 - add support for AD7889 Input: atkbd - rely on input core to restore state on resume Input: add generic suspend and resume for input devices Input: libps2 - additional locking for i8042 ports
2009-09-22Input: add driver for Atmel AT42QT2160 Sensor ChipRaphael Derosso Pereira
This version only supports individual cells (no slide support yet). The code has been tested on proprietary development ARM board, but should work fine on other machines. Signed-off-by: Raphael Derosso Pereira <raphaelpereira@gmail.com> Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
2009-09-21Input: max7359 - use threaded IRQsDmitry Torokhov
Convert max7359 driver to use IRQ threading instead of using workqueue. Tested-by: Joonyoung Shim <jy0922.shim@samsung.com> Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
2009-09-21Input: add driver for Maxim MAX7359 key switch controllerKim Kyuwon
The Maxim MAX7359 is a I2C interfaced key switch controller which provides microprocessors with management of up to 64 key switches. This patch adds support for the MAX7359 key switch controller. Signed-off-by: Kim Kyuwon <q1.kim@samsung.com> Reviewed-by: Trilok Soni <soni.trilok@gmail.com> Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
2009-09-21trivial: fix typo s/ketymap/keymap/ in commentThadeu Lima de Souza Cascardo
Signed-off-by: Thadeu Lima de Souza Cascardo <cascardo@holoscopio.com> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2009-09-18Merge git://git.kernel.org/pub/scm/linux/kernel/git/lethal/sh-2.6Linus Torvalds
* git://git.kernel.org/pub/scm/linux/kernel/git/lethal/sh-2.6: (262 commits) sh: mach-ecovec24: Add user debug switch support sh: Kill off unused se_skipped in alignment trap notification code. sh: Wire up HAVE_SYSCALL_TRACEPOINTS. video: sh_mobile_lcdcfb: use both register sets for display panning video: sh_mobile_lcdcfb: implement display panning sh: Fix up sh7705 flush_dcache_page() build. sh: kfr2r09: document the PLL/FLL <-> RF relationship. sh: mach-ecovec24: need asm/clock.h. sh: mach-ecovec24: deassert usb irq on boot. sh: Add KEYSC support for EcoVec24 sh: add kycr2_delay for sh_keysc sh: cpufreq: Include CPU id in info messages. sh: multi-evt support for SH-X3 proto CPU. sh: clkfwk: remove bogus set_bus_parent() from SH7709. sh: Fix the indication point of the liquid crystal of AP-325RXA(AP3300) sh: Add EcoVec24 romImage defconfig sh: USB disable process is needed if romImage boot for EcoVec24 sh: EcoVec24: add HIZA setting for LED sh: EcoVec24: write MAC address in boot sh: Add romImage support for EcoVec24 ...
2009-09-18Merge branch 'omap-for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap-2.6 * 'omap-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap-2.6: (47 commits) OMAP clock: use debugfs_remove_recursive() for rewinding OMAP2/3/4 core: create omap_device layer OMAP: omap_hwmod: call omap_hwmod init at boot; create interconnects OMAP2/3/4: create omap_hwmod layer OMAP2/3 board-*.c files: read bootloader configuration earlier OMAP2/3/4 PRCM: add module IDLEST wait code OMAP2/3 PM: create the OMAP PM interface and add a default OMAP PM no-op layer OMAP3 clock: remove superfluous calls to omap2_init_clk_clkdm OMAP clock: associate MPU clocks with the mpu_clkdm OMAP3 clock: Fixed processing of bootarg 'mpurate' OMAP: SDRC: Add several new register definitions OMAP: powerdomain: Fix overflow when doing powerdomain deps lookups. OMAP: PM: Added suspend target state control to debugfs for OMAP3 OMAP: PM debug: Add PRCM register dump support OMAP: PM debug: make powerdomains use PM-debug counters OMAP: PM: Add pm-debug counters OMAP: PM: Add closures to clkdm_for_each and pwrdm_for_each. OMAP: PM: Hook into PM counters OMAP: PM counter infrastructure. OMAP3: PM: fix lockdep warning caused by omap3_pm_init ...
2009-09-17Input: add driver for ADP5588 QWERTY I2C KeypadMichael Hennerich
Signed-off-by: Michael Hennerich <michael.hennerich@analog.com> Signed-off-by: Bryan Wu <cooloney@kernel.org> Signed-off-by: Mike Frysinger <vapier@gentoo.org> Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
2009-09-17Input: add driver for OpenCores Keyboard ControllerJavier Herrero
Driver for the keyboard hardware documented here: http://www.opencores.org/project,keyboardcontroller Signed-off-by: Javier Herrero <jherrero@hvsistemas.es> Signed-off-by: Bryan Wu <cooloney@kernel.org> Signed-off-by: Mike Frysinger <vapier@gentoo.org> Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
2009-09-17Input: atkbd - rely on input core to restore state on resumeDmitry Torokhov
Now that input core takes care of restoring state of input devices upon resume we don't need to do anything special here. Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
2009-09-16Merge branch 'master' of ↵Paul Mundt
git://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux-2.6 Conflicts: arch/sh/kernel/vmlinux.lds.S
2009-09-15Nicolas Pitre has a new email addressNicolas Pitre
Due to problems at cam.org, my nico@cam.org email address is no longer valid. FRom now on, nico@fluxnic.net should be used instead. Signed-off-by: Nicolas Pitre <nico@fluxnic.net> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
generated by cgit v1.2.3 (git 2.25.1) at 2024-07-11 19:17:45 +0000