| Age | Commit message (Collapse) | Author |
|---|
|
Signed-off-by: Andy Green <andy@openmoko.com>
|
|
Signed-off-by: Andy Green <andy@openmoko.com>
|
|
Signed-off-by: Andy Green <andy@openmoko.com>
|
|
Signed-off-by: Jonas Bonn <jonas.bonn@gmail.com>
|
|
Signed-off-by: Andy Green <andy@openmoko.com>
|
|
This file was moved in the big file move, but some OpenMoko specific
changes did not make it. This patch peels out the relevant bits and
adds them to the gpio.h file in the upstream location.
The only OpenMoko specific change is the definition of gpio_to_irq and
irq_to_gpio. These functions should really be defined in gpio_chip and
asm-generic/gpio.h; this is coming soon, but until then we'll just use
the Moko definitions that we've been using up until now.
This is not strictly correct for the GTA02 case, but it works given
the configuration that's currently in use. This can be fixed (and
should become evident) when the configuration options are cleaned up.
Signed-off-by: Jonas Bonn <jonas.bonn@gmail.com>
|
|
This file is OpenMoko specific and didn't get moved in the big file
move. Move it to arch/arm/mach-s3c2410/include/mach where it belongs
and fix the references to it.
Signed-off-by: Jonas Bonn <jonas.bonn@gmail.com>
|
|
Move to level from edge, fix local_save... to local_irq...
simplify bitbang sequence
Signed-off-by: Sean McNeil <sean@mcneil.com>
|
|
Add /sys files for jack state reporting.
Signed-off-by: Sean McNeil <sean@mcneil.com>
|
|
Hi all.
I'm seeing a behavior in my freerunner where light taps on the
touchscreen are not registered as clicks by the kernel even though the
base hardware does report clicking events. I'm seeing the kernel
generate extra "unclick" events in these cases. It looks like in the
driver, an unclick event is processed before the click event, thus
suppressing the click from ever being generated. I'm attaching a patch
that addresses this. I'm now able to type much faster on the matchbox
keyboard, even when using my fingertips instead of fingernails.
Dima
Signed-off-by: Dima Kogan <dkogan@cds.caltech.edu>
|
|
Fix all of the mismatches Andrzej put us on to.
Found-by: Andrzej Zaborowski <balrogg@gmail.com>
Signed-off-by: Andy Green <andy@openmoko.com>
|
|
style cleanups for accel threshold setting patch
Signed-off-by: Andy Green <andy@openmoko.com>
|
|
Hi!
First: Unfortunately, the freerunner currently wakes up immediately on
suspend when the accelerometer IRQ is selected as a wakeup source. I'm
posting this for comments and if someone else wants to have a look at
this problem.
The patch should be safe to apply even though the sleep portion doesn't
work - as long as it's configured it will not disturb anything.
// Simon
--
lis302dl-configure-wakeup-interrupts.patch
From: simon.kagstrom <simon.kagstrom@gmail.com>
First: Unfortunately, the freerunner currently wakes up immediately on
suspend when the accelerometer IRQ is selected as a wakeup source.
Add configuration of wakeup/freefall interrupts through a sysfs
interface. Configuration is done through echoing a value of the
form
X Y Z THRESHOLD DURATION SPEC
to freefall_wakeup_1/2. X, Y and Z are threshold values, given as a
value > 0, < 0 or 0 to specify if an interrupt should be generated for
high or low thresholds or neither (off). THRESHOLD specifies the
threshold that must be exceeded. DURATION specifies the time in
milliseconds for which the acceleration should be measured. SPEC is
either '1' or '0' and specifies if the thresholds should be taken all
together or one at a time ('and' or 'or' mode).
Echoing '0' to the file turns off the interrupts.
Example:
echo "1 1 1 60 60 0" > freefall_wakeup_1 # Turn on x,y,z, 60ms/60 threshold, or-mode
echo "0" > freefall_wakeup_1 # Turn off interrupt
The hardware supports two simulataneous wakeup sources to be configured,
but the freerunner only connects one of the interrupt outputs. The patch
exports both. Similarly, only the "top" accelerometer can be used as a
wake-up source, and it's not possible to generate DATA_READY interrupts
while the wakeup interrupts are active.
Signed-off-by: Simon Kagstrom <simon.kagstrom@gmail.com>
|
|
This patch fixes module unloading for the accelerometer (actually module
loading failed before). The two problems were that the interrupt was not
unregistered, and that the device was left in a "strange" state.
Signed-off-by: Simon Kagstrom <simon.kagstrom@gmail.com>
|
|
Signed-off-by: Andy Green <andy@openmoko.com>
|
|
Reported-by: Mickey Lauer <mickey@openmoko.org>
AUX level detection is inverted based on GTA01 or 02
Signed-off-by: Andy Green <andy@openmoko.com>
|
|
Reported-by: John Lee <john_lee@openmoko.com>
We don't reset the devices either at init or resume, where init
means use the BOOT bit to reload device calibration coefficients
from internal EEPROM. John Lee saw brain-damaged behaviour after
resume and sometimes after boot (since it may not have lost power
to force a BOOT itself that makes sense).
This patch
- adds a diagnostic dump feature down /sys
- forces BOOT action on init and resume, and waits for
completion
- makes sure XYZ capture is enabled on resume
- adds some constants in the .h and removes some magic numbers
in the code by using them
Signed-off-by: Andy Green <andy@openmoko.com>
|
|
Reported-by: Holger Freyther <zecke@openmoko.org>
length can be zero... blowing a divide by zero exception...
which somehow I don't get (?) Anyway the code is wrong and
this should fix it.
Signed-off-by: Andy Green <andy@openmoko.com>
|
|
Touchscreen on GTA01-02 experiences noise on the channel that serves the
"tall axis" of the LCM. The sample quality of the other axis is good.
The bad samples have a characteristic of one shot excursions that can
reach +/- 20% or more of the sample average.
Previously, we had a simple averaging scheme going in the touchscreen
driver that summed up 32 x and ys and then divided it by 32. This patch
first tidies up the existing code for style, then adds a new "running
average" concept with a FIFO. The running average is separate from the
summing average mentioned above, and is accurate for the last n samples
sample-by-sample, where n is set by 1 << excursion_filter_len_bits in the
machine / platform stuff.
The heuristic the patch implements for the filtering is to accept all
samples, but tag the *previous* sample with a flag if it differed from
the running average by more than reject_threshold_vs_avg in either
axis. The next sample time, a beauty contest is held if the flag was
set to decide if we think the previous sample was a one-shot excursion
(detected by the new sample being closer to the average than to the
flagged previous sample), or if we believe we are moving (detected by
the new sample being closer to the flagged previous sample than the
average. In the case that we believe the previous sample was an
excursion, we simply overwrite it with the new data and adjust the
summing average to use the new data instead of the excursion data.
I only tested this by eyeballing the output of ts_print_raw, but it
seemed to be quite a bit better. Gross movement appeared to be
tracked fine too. If folks want to try different heuristics on top
of this patch, be my guest; either way feedback on what it looks like
with a graphical app would be good.
Signed-off-by: Andy Green <andy@openmoko.com>
|
|
From dc6d335b467646d802a21ea6b925ee97e83e07be Mon Sep 17 00:00:00 2001
From: Holger Freyther <zecke@openmoko.org>
Date: Thu, 15 May 2008 01:16:23 +0200
Subject: [PATCH] Do not use msleep in the resume path of s3c2410_ts as it
might lockup
For some reason msleep might set the only task running into a suspended
state and no timer will ever wake it up. Use mdelay to avoid this. I was not
able to understand the reasoning of sleeping after enabling the clock. So we
might just remove the msleep/mdelay at all and be fine.
Signed-Off-By: Holger Freyther <zecke@openmoko.org>
|
|
the KEY_PHONE is backwards. It returns up when pushed and down when
released. The following change fixes it:
Signed-off-by: Sean McNeil <sean@mcneil.com>
|
|
Signed-off-by: Andy Green <andy@openmoko.com>
|
|
struct input_dev in include/linux/input.h used to have a union
cdev which contained the associated device struct pointer. This
got simplified out in 2.6.25, so this patch removes cdev from
our drivers that used it before.
Signed-off-by: Andy Green <andy@openmoko.com>
|
|
Make sure we can't lose a jack interrupt in debounce, despite it is
a one-in-a-million thing that just needs replug to clear
Signed-off-by: Andy Green <andy@openmoko.com>
|
|
Signed-Off-By: Holger Freyther <zecke@openmoko.org>
|
|
Headphone jack detection is bouncy, it can trigger multiple interrupts
on insertion or removal. This patch adds a workqueue that waits out the
interrupt spew in 100ms units, and if it sees no more interrupts for 100ms
only then samples and reports the jack state. I was unable to get a bounce
after 20 or so tries after this.
Signed-off-by: Andy Green <andy@openmoko.com>
|
|
Samsung SoC
Use this irq_to_gpio in the neo1973 keyboard driver
|
|
Signed-Off-by: Holger Freyther <zecke@openmoko.org>
|
|
Signed-Off-by: Holger Freyther <zecke@openmoko.org>
|
|
Signed-Off-by: Holger Freyther <zecke@openmoko.org>
|
|
GTA01_GPIO_AUX_KEY looks odd.
Signed-Off-by: Holger Freyther <zecke@openmoko.org>
|
|
Add platform stuff to deal with going in and out of suspend
so the motion sensor IO is not driving high into unpowered sensors
Signed-off-by: Andy Green <andy@openmoko.com>
|
|
|
|
This patch disables the reporting of touchscreen-like devices via
/dev/input/mice. In the Neo1973 (much like other handheld devices),
we need this to distinguish between the touchscreen (which uses tslib)
and optional additional usb/bluetooth mice that might be attached.
Signed-off-by: Harald Welte <laforge@openmoko.org>
|
|
|
|
This is a Linux driver for the STmicro LIS302DL 3-axis accelerometer.
Signed-off-by: Harald Welte <laforge@openmoko.org>
|
|
|
|
This provides support for the GTA01 keyboard
Signed-off-by: Harald Welte <laforge@openmoko.org>
|
|
As it is, all instances of ->release() for files that have ->fasync()
need to remember to evict file from fasync lists; forgetting that
creates a hole and we actually have a bunch that *does* forget.
So let's keep our lives simple - let __fput() check FASYNC in
file->f_flags and call ->fasync() there if it's been set. And lose that
crap in ->release() instances - leaving it there is still valid, but we
don't have to bother anymore.
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
The SGI Volume Button interface driver uses GPL-only symbols
platform_driver_unregister and platform_driver_register, but
lacks license specification. Thus, when compiled as a module,
this driver cannot be installed. This patch fixes this by
adding the MODULE_LICENSE() specification.
Signed-off-by: Dmitri Vorobiev <dmitri.vorobiev@movial.fi>
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input:
Input: psmouse - add support for Elantech touchpads
Input: i8042 - add Blue FB5601 to noloop exception table
|
|
|
|
Separate building of corgi_ssp.c, and introduce a new hidden config option
CONFIG_CORGI_SSP_DEPRECATED for this. Aslo mark corgi_ts.c and corgi_bl.c
as deprecated.
This unbreaks the legacy configs in {corgi,spitz}_defconfig, however, SPI
based ADS7846 touchscreen driver and a new SPI-based corgi_lcd.c driver
with integrated backlight support are recommended.
Signed-off-by: Eric Miao <eric.miao@marvell.com>
|
|
* 'for-next' of git://git.o-hand.com/linux-mfd:
mfd: further unbork the ucb1400 ac97_bus dependencies
mfd: ucb1400 needs GPIO
mfd: ucb1400 sound driver uses/depends on AC97_BUS:
mfd: Don't use NO_IRQ in WM8350
mfd: update TMIO drivers to use the clock API
mfd: twl4030-core irq simplification
mfd: add base support for Dialog DA9030/DA9034 PMICs
mfd: TWL4030 core driver
mfd: support tmiofb cell on tc6393xb
mfd: add OHCI cell to tc6393xb
mfd: Fix htc-egpio compile warning
mfd: do tcb6393xb state restore on resume only if requested
mfd: provide and use setup hook for tc6393xb
mfd: update sm501 debugging/low information messages
mfd: reduce stack usage in mfd-core.c
|
|
Signed-off-by: Paul Mundt <lethal@linux-sh.org>
|
|
Cc: "Randy.Dunlap" <rdunlap@xenotime.net>
Cc: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com>
Signed-off-by: Samuel Ortiz <sameo@openedhand.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
USB should not be having it's own printk macros, so remove info() and
use the system-wide standard of dev_info() wherever possible.
Acked-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
|
|
USB should not be having it's own printk macros, so remove warn() and
use the system-wide standard of dev_warn() wherever possible. In the
few places that will not work out, use a basic printk().
Cc: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
|
|
This is version 5 of the driver. Relative mode support has been
dropped (users wishing to use touchpad in relative mode can use
standard PS/2 protocol emulation done in hardware). The driver
supports both original version of Elantech protocol and the newer
one used by touchpads installed in EeePC.
Signed-off-by: Arjan Opmeer <arjan@opmeer.net>
Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
|
|
Signed-off-by: Stefan Bader <stefan.bader@canonical.com>
Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
|
