aboutsummaryrefslogtreecommitdiff
path: root/drivers/media/video/cx88/cx88-cards.c
AgeCommit message (Collapse)Author
2009-01-22MERGE-via-pending-tracking-hist-MERGE-via-stable-tracking-MERGE-via-mokopatc ↵merge
hes-tracking-fix-stray-endmenu-patch-1232632040-1232632141 pending-tracking-hist top was MERGE-via-stable-tracking-MERGE-via-mokopatches-tracking-fix-stray-endmenu-patch-1232632040-1232632141 / fdf777a63bcb59e0dfd78bfe2c6242e01f6d4eb9 ... parent commitmessage: From: merge <null@invalid> MERGE-via-stable-tracking-hist-MERGE-via-mokopatches-tracking-fix-stray-endmenu-patch-1232632040 stable-tracking-hist top was MERGE-via-mokopatches-tracking-fix-stray-endmenu-patch-1232632040 / 90463bfd2d5a3c8b52f6e6d71024a00e052b0ced ... parent commitmessage: From: merge <null@invalid> MERGE-via-mokopatches-tracking-hist-fix-stray-endmenu-patch mokopatches-tracking-hist top was fix-stray-endmenu-patch / 3630e0be570de8057e7f8d2fe501ed353cdf34e6 ... parent commitmessage: From: Andy Green <andy@openmoko.com> fix-stray-endmenu.patch Signed-off-by: Andy Green <andy@openmoko.com>
2008-10-21V4L/DVB (9333): cx88: Not all boards that requires cx88-mpeg has frontendsMauro Carvalho Chehab
The multifrontend changes on cx88 assumed that all boards that use cx88-mpeg supports DVB. This is not true. There also a few analog-only boards based on Blackboard design that also uses cx88-mpeg. For those boards, there's no need to allocate dvb frontends. This patch fixes videobuf allocation for those devices. Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2008-10-17V4L/DVB (9267): cx88: Update of audio routing config for FM radioDarron Broad
This adds audio routing for the hvr-1300/3000/4000 cards enabling FM audio for the I2S ADC method of the cx88. At this time only the HVR-4000 has been tested. It is assumed the HVR-3000/1300 are the same. Signed-off-by: Darron Broad <darron@kewl.org> Signed-off-by: Steven Toth <stoth@linuxtv.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2008-10-17V4L/DVB (9229): cx88: Add intial config for FM radio supportDarron Broad
This add initial configuration for radio support on the hvr-3000/4000. FM radio doesn't work as yet without further patches (to come), but this prepares for that. Experimental radio support shows that it works when combined with additional audio routing work for cards with an FMD1216ME analogue frontend, but not the MEX variant (more later). Signed-off-by: Darron Broad <darron@kewl.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2008-10-17V4L/DVB (9228): cx88: Add audio routing for the hvr-3000/4000Darron Broad
This adds audio routing on the hvr-3000/4000 This is a preliminary patch for later routing requirements. This adds line-in support on the 2 cards mentioned. It is also apparent that there is an initial open fault for line-in when opening composite/s-video. This will be fixed later. It was also noticed that the bit-field for audio routing which was 2 bits needs an increase as the WM8775 for example, allows a value 4 bits wide for it's audio mux. Signed-off-by: Darron Broad <darron@kewl.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2008-10-17V4L/DVB (9226): MFE: cx88: Reset cx22702 on hvr-3000/4000Darron Broad
The cx22702 is now always reset on module load. Prior to this the cx22702 was not found on i2c scan without a full reset. Signed-off-by: Darron Broad <darron@kewl.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2008-10-17V4L/DVB (9223): MFE: Fix a number of bugs and some tidying upDarron Broad
A number of reference to videobuf_dvb_get_frontend used an invalid index. This has been fixed. The section for the HVR3000 in advise_acquire was redundant as the same logic is used on the HVR4000. This has been removed and both cards now use the same function. A number of small errors and whitespace errors are also fixed. Signed-off-by: Darron Broad <darron@kewl.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2008-10-17V4L/DVB (9222): S2API: Add Multiple-frontend on a single adapter support.Steven Toth
A detailed description from the original patches 2 years ago: "The WinTV-HVR3000 has a single transport bus which is shared between a DVB-T and DVB-S modulator. These patches build on the bus acquisition cx88 work from a few weeks ago to add support for this. So to applications the HVR3000 looks like this: /dev/dvb/adapter0/fe0 (cx24123 DVB-S demod) /dev/dvb/adapter0/fe1 (cx22702 DVB-T demod) Additional boards continue as before, eg: /dev/dvb/adapter1/fe0 (lgdt3302 ATSC demod) The basic change is removing the single instance of the videobuf_dvb in cx8802_dev and saa7134_dev(?) and replacing it with a list and some supporting functions. *NOTE* This branch was taken before v4l-dvb was closed for 2.6.19 so two or three current cx88 patches appear to be reversed by this tree, this will be cleaned up in the near future. The patches missing change the mutex handing to core->lock, fix an enumeration problem." It should be recognised that a number of people have been maintaining this patchset. Significant levels of Kudos to everyone one involved, including but not limited to: Darron Broad Fabio M. Di Nitto Carlo Scarfoglio Hans Werner Without the work of these people, and countless others, my two year old patches would of died on the Mercurial linuxtv.org vine a long time ago. TODO: Revise these patches a little further so that the need for demux1 and dvr0 is optional, not mandatory on the HVR3000. HISTORY (darron): This is the last update to MFE prepared by Hans which is based upon the `scratchpad' diff created by Carlo. All MFE work prior to that point must be attributed to Fabio who ported and maintained Steve's original patch up to that time. Signed-off-by: Steven Toth <stoth@linuxtv.org> Signed-off-by: Darron Broad <darron@kewl.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2008-10-13V4L/DVB (9186): Added support for Prof 7300 DVB-S/S2 cardsOleg Roitburd
Added support for Prof 7300 DVB-S/S2 card. The card based on cx24116 demodulator. Signed-off-by: Oleg Roitburd <oroitburd@gmail.com> Signed-off-by: Steven Toth <stoth@linuxtv.org> [mchehab@redhat.com: fixed CARDLIST.cx88 entry] Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2008-10-12V4L/DVB (9135): cx88 Dvico FusionHDTV ProTim Farrington
Well, one thing you encouraged me to do was re-test some of my cards which contained the xc3028-zarlink combo. Which led me to test a Dvico FusionHDTV Pro. Almost a year ago, Chris Pascoe did a patch for this which can be found at his ~pascoe/xc-test at Linuxtv. This worked very well, however that was using his version of firmware. Alas, someone attempted to use this and patch v4l-dvb, and messed it up. So I've fixed it. I enclose the patch against today's tree (containing your latest tuner-xc2028.c patch). The card now works very well, well with DVB-T anyway. Signed-off-by: Tim Farrington <timf@iinet.net.au> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2008-10-12V4L/DVB (9066): Pinnacle Hybrid PCTV Pro (pctv310c) DVB-T supportStéphane Voltz
This patch against latest mercurial makes DVB-T working on Pinnacle Hybrid PCTV Pro (pctv310c). In cx88-dvb.c, a specific zl10353_config is created with the if2 inferred from the old comment in the currently used config. It is then used for attach, and i2c_gate_ctrl is set to NULL. The entry in cx88-cards.c is modified with GPIO gathered from windows with regspy, and DVB enabled. The frontend is set to XC3028_FE_ZARLINK456 to match the zl10353_config. It is working great with the freeview channels I can receive. Signed-off-by: Stéphane Voltz <stef.dev@free.fr> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2008-10-12V4L/DVB (9062): Add support for Prolink Pixelview Global ExtremeMauro Carvalho Chehab
Thanks to Sidney Matias <sidney.matias@gmail.com> for getting GPIO values and testing on this device. Cc: Sidney Matias <sidney.matias@gmail.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2008-10-12V4L/DVB (9049): convert tuner drivers to use dvb_frontend->callbackMichael Krufky
Signed-off-by: Michael Krufky <mkrufky@linuxtv.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2008-10-12V4L/DVB (9026): Add support for ST STV0288 demodulator and cards with it.Igor M. Liplianin
Add support for ST STV0288 demodulator and cards with it, such as TeVii S420. Patch is co-authored with Georg Acher <acher@baycom.de> Signed-off-by: Georg Acher <acher@baycom.de> Signed-off-by: Igor M. Liplianin <liplianin@me.by> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2008-10-12V4L/DVB (9023): cx88: HVR3000 / 4000 GPIO related changesSteven Toth
Patch by Darron Broad. Signed-off-by: Steven Toth <stoth@linuxtv.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2008-10-12V4L/DVB (9020): Added support for TBS 8920 DVB-S/S2 cardOleg Roitburd
Added support for TBS 8920 DVB-S/S2 card. The card based on cx24116 demodulator. Signed-off-by: Oleg Roitburd <oroitburd@gmail.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2008-10-12V4L/DVB (9019): Added support for Omicom SS4 DVB-S/S2 cardOleg Roitburd
Added support for Omicom SS4 DVB-S/S2 card. The card based on cx24116 demodulator. Signed-off-by: Oleg Roitburd <oroitburd@gmail.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2008-10-12V4L/DVB (8989): Added support for TeVii S460 DVB-S/S2 cardIgor M. Liplianin
Added support for TeVii S460 DVB-S/S2 card. The card based on cx24116 demodulator. Signed-off-by: Igor M. Liplianin <liplianin@me.by> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2008-10-12V4L/DVB (8987): cx88: Add support for the Hauppauge HVR4000 and HVR4000-LITE ↵Steven Toth
(S2) boards Adding support for Hauppauge's cx88 S2 based products, based on the cx24116 DVB-S2 demodulator. Signed-off-by: Steven Toth <stoth@linuxtv.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2008-07-26V4L/DVB (8477): v4l: remove obsolete audiochip.hHans Verkuil
Converted the last users of audiochip.h to the v4l2-chip-ident.h header and remove the now unused audiochip.h header. Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2008-06-05V4L/DVB (7990): Fix entry for PowerColor RA 330 and make it run with ↵Daniel Gimpelevich
firmware version 2.7 Signed-off-by: Daniel Gimpelevich <daniel@gimpelevich.san-francisco.ca.us> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2008-04-29V4L/DVB (7749): cx88: fix tuner setupMauro Carvalho Chehab
Tuner setup were happening during i2c attach callback. This means that it would happen on two conditions: 1) if tuner module weren't load, it will happen at request_module("tuner"); 2) if tuner is not compiled as a module, or it is already loaded (for example, on setups with more than one tuner), it will happen when cx88 registers I2C bus. Due to that, if tuner were loaded, tuner setup will happen _before_ reading the proper values at tuner eeprom. Since set_addr refuses to change for a tuner that were previously defined (except if the tuner_addr is set), this were making eeprom tuner detection useless. This patch removes tuner type setup from cx88-i2c, moving it to the proper place, after taking eeprom into account. Reviewed-by: Gert Vervoort <gert.vervoort@hccnet.nl> Reviewed-by: Ian Pickworth <ian@pickworth.me.uk> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2008-04-26V4L/DVB (7742): cx88: Add support for the DViCO FusionHDTV_7_GOLD digital modesSteven Toth
The S5H1411 demodulator is now enabled. Signed-off-by: Steven Toth <stoth@hauppauge.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2008-04-24V4L/DVB (7642): cx88: enable radio GPIO correctlySteven Toth
cx88: enable radio GPIO correctly. Signed-off-by: Steven Toth <stoth@hauppauge.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2008-04-24V4L/DVB (7505): Powercolor Real Angel 330 (fixes gpio references)Dâniel Fraga
The attached patch fixes gpio references for Powercolor Real Angel 330. Signed-off-by: Daniel Fraga <fragabr@gmail.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2008-04-24V4L/DVB (7448): Add support for Kworld ATSC 120Mauro Carvalho Chehab
This board has a s5h1409 demod, plus a xc30x8 tuner (probably, xc3018). This patch adds proper support for radio, video, s-video, composite and ATSC. However, support for radio and video depends on having s5h1409 i2c gate open, otherwise, xc30x8 chip won't be visible. For a better support, some rework is needed on cx88 driver, to allow adding xc30x8 to i2c bus without sending i2c 0 byte reading to 0xc2 address. Thanks to Vanessa Ezekowitz <vanessaezekowitz@gmail.com> for helping to figure out the proper parameters for s5h1409 and the GPIO pins used by each configuration. Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2008-04-24V4L/DVB (7398): Adds an error if priv argument of tuner_callback is NULLMauro Carvalho Chehab
Adds a consistency check to avoid OOPS, if tuner_callback priv argument is NULL. Also, simplifies callback codes on cx88. Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2008-04-24V4L/DVB (7371): cx88: Fix audio on Prolink Pixelview Mpeg 8000GTMauro Carvalho Chehab
This board works only with non-mts firmware Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2008-04-24V4L/DVB (7370): Add basic support for Prolink Pixelview MPEG 8000GTMauro Carvalho Chehab
TV reception ok. S-video and Composite not tested. Audio not tested. IR not implemented yet. Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2008-04-24V4L/DVB (7327): cx88: Fix memset for tuner-xc3028 controlMauro Carvalho Chehab
Fix a cut-and-paste error Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2008-04-24V4L/DVB (7326): Fix bad whitespacesMauro Carvalho Chehab
Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2008-04-24V4L/DVB (7288): cx88: fix GPIO for FusionHDTV 7 Gold input selectionMichael Krufky
Fix GPIO for FusionHDTV 7 Gold tv / s-video / composite input selection. Fix card textual name to match other FusionHDTV device names. Signed-off-by: Michael Krufky <mkrufky@linuxtv.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2008-04-24V4L/DVB (7287): cx88: add analog support for DVICO FusionHDTV7 GoldSteven Toth
Signed-off-by: Steven Toth <stoth@hauppauge.com> Signed-off-by: Michael Krufky <mkrufky@linuxtv.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2008-04-24V4L/DVB (7271): cx88-cards: Fix powerangel gpio1Mauro Carvalho Chehab
With this gpio, audio works properly. Thanks to Daniel Fraga <fragabr@gmail.com> for helping on fixing the code for Powerangel Real board. Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2008-04-24V4L/DVB (7269): cx88: Powercolor Angel works only with firmware version 2.5Mauro Carvalho Chehab
Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2008-04-24V4L/DVB (7265): cx88: prints an info when xc2028 is set or is attachedMauro Carvalho Chehab
Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2008-04-24V4L/DVB (7264): cx88-cards: always use a level on printk messagesMauro Carvalho Chehab
Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2008-04-24V4L/DVB (7263): Some cleanups at cx88 callback methodsMauro Carvalho Chehab
Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2008-04-24V4L/DVB (7259): FusionHDTV DVB-T Pro tuning problem fixesChris Pascoe
It seems that on this board, the demodulator provides the pullup on the I2C bus, which means that calling i2c_gate_ctrl crashes the bus. Turn this off and the xc3028 can talk OK. Also fix some GPIO related settings that became more clear through working on this. Some changes made by Mauro Chehab to allow merging it with some other xc3028 patches. Signed-off-by: Chris Pascoe <c.pascoe@itee.uq.edu.au> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2008-04-24V4L/DVB (7258): Support DVB-T tuning on the DViCO FusionHDTV DVB-T ProChris Pascoe
Add support for tuning DVB-T channels on DViCO's FusionHDTV DVB-T Pro board. The IR remote and analog tuner are not supported at this time. Some changes made by Mauro Chehab to allow merging it with some other xc3028 patches. Signed-off-by: Chris Pascoe <c.pascoe@itee.uq.edu.au> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2008-04-24V4L/DVB (7257): cx88: Add xc2028/3028 boardsMauro Carvalho Chehab
This patch ports a patch from Markus Rechberger to work with tuner-xc2028. It adds entries for several cx88 boards with xc2038/3028 tuners. Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2008-04-24V4L/DVB (7256): cx88: Add support for tuner-xc3028Mauro Carvalho Chehab
Callback gpio's based on Markus Rechberger, Christopher Pascoe and Steven Toth patches. Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2008-04-24V4L/DVB (7254): cx88: fix FusionHDTV 5 PCI nano name and enable IR supportMichael Krufky
load ir-kbd-i2c for IR remote control support on DViCO FusionHDTV 5 PCI nano Signed-off-by: Michael Krufky <mkrufky@linuxtv.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2008-04-24V4L/DVB (7252): cx88: Add support for the Dvico PCI NanoSteven Toth
ATSC is known to work. SVideo / Composite should work (I have no cable to test). Analog tuner support does not work. Signed-off-by: Steven Toth <stoth@hauppauge.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2008-03-20V4L/DVB (7267): cx88: Fix: Loads tuner module before sending commands to itMauro Carvalho Chehab
Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2008-01-25V4L/DVB (7059): cx88: Ensure the tuner is reset correctlySteven Toth
Previous patches assume the tuner was on a different gpio. This patch corrects this. Signed-off-by: Steven Toth <stoth@hauppauge.com> Signed-off-by: Chaogui Zhang <czhang1974@gmail.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2008-01-25V4L/DVB (7045): xc5000: Small amount of cleanup and commentingSteven Toth
xc5000: Small amount of cleanup and commenting, just for clarification. Signed-off-by: Steven Toth <stoth@hauppauge.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2008-01-25V4L/DVB (7043): New card supported(partially): Pinnacle 800iSteven Toth
From Zhang: This patch continues the support for the Pinnacle HD 800i. Patch committed as-is, cleanups to follow ... Steve Signed-off-by: Chaogui Zhang <czhang1974@gmail.com> Signed-off-by: Steven Toth <stoth@hauppauge.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2008-01-25V4L/DVB (6831): Audio routes fix for blackbird boards with the wm8775 ADCRicardo Cerqueira
Fix lack of audio on the MPEG-2 stream of wm8775 based blackbirds. The wm8775 module initializes the audio input at "route 2", which doesn't hold true for all boards. The HVR-1300, for example, uses route 1 for tuner audio, and route 2 for baseband. So we must route the audio to the proper input depending on what video input is being used. Signed-off-by: Ricardo Cerqueira <v4l@cerqueira.org> Signed-off-by: Michael Krufky <mkrufky@linuxtv.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2008-01-25V4L/DVB (6386): Add support for radio on CX88_BOARD_MSI_TVANYWHERE_MASTERMauro Carvalho Chehab
This board has some special tea5767 configuration. Basically, radio XTAL uses a different frequency than the other supported radios. It uses a 13 MHz XTAL. This patch adds the proper radio gpio and tea5767 configurations for the board. Also, with PAL/BG, the board requires some special init for tda9887: port1=0 port2=0 qss=1 Thanks to Serge Kolotylo and MIDImaster for their help on identifying the proper needs for this driver. Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
generated by cgit v1.2.3 (git 2.25.1) at 2024-09-10 00:36:18 +0000