aboutsummaryrefslogtreecommitdiff
path: root/drivers/mmc
AgeCommit message (Collapse)Author
2008-11-19Carry over changes from asm/arch/regs-sdi.hJonas Bonn
This pulls the Moko changes to regs-sdi.h that were in include/asm-arm/arch-s3c2410 over to the file at arch/arm/../mach and deletes the file at include/asm-arm. Note: we have been using a mix of regs-sdi.h from the two different locations. The unification of these two files may have some unknown consequences... keep your eyes open for oddities after applying this. Signed-off-by: Jonas Bonn <jonas.bonn@gmail.com>
2008-11-19Move asm/arch/mci.h to mach/mci.hJonas Bonn
Signed-off-by: Jonas Bonn <jonas.bonn@gmail.com>
2008-11-19[ARM]: Build fix after file moveJonas Bonn
After the big include file move these paths ended up incorrect. Fix these so that this builds cleanly again. Signed-off-by: Jonas Bonn <jonas.bonn@gmail.com>
2008-11-19s3c_mci.patchmokopatches
This is a MMC/SD driver for the Samsung S3C24xx SD/MMC controller, originally developed years ago by Thomas Kleffel <tk@maintech.de>. Due to time restraints, he had no time to further maintain the driver and follow the mainline Linux changes in the SD/MMC stack. With his authorization, I have taken over the task of making it compliant to the current mainline SD/MMC API and take care of the mainline kernel merge. After a potential kernel inclusion, we would co-maintain the driver. Acked-by: Thomas Kleffel <tk@maintech.de> Signed-off-by: Harald Welte <laforge@gnumonks.org>
2008-11-19Merge branch 'rmk-next' into s3c64xxBen Dooks
2008-11-10Merge branch 'master' of ↵Ben Dooks
git://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux-2.6 into rmk-next
2008-11-08mmc: struct device - replace bus_id with dev_name(), dev_set_name()Kay Sievers
Acked-by: Greg Kroah-Hartman <gregkh@suse.de> Signed-Off-By: Kay Sievers <kay.sievers@vrfy.org> Signed-off-by: Pierre Ossman <drzeus@drzeus.cx>
2008-11-08mmc: increase SD write timeout for crappy cardsPierre Ossman
It seems that some cards are slightly out of spec and occasionally will not be able to complete a write in the alloted 250 ms [1]. Incease the timeout slightly to allow even these cards to function properly. [1] http://lkml.org/lkml/2008/9/23/390 Signed-off-by: Pierre Ossman <drzeus@drzeus.cx>
2008-11-03SDHCI: Add change_clock callback for glue driversBen Dooks
Add a change_clock callback to allow drivers to update device specific clock selections and control registers when there is a change in clock. Move the main part of sdhci_set_clock() to a new routine which can be called by the glue drivers to do the sdhci standard clock management. Update the sdhci-s3c driver to use this to select the appropriate clock source when clocks change. Signed-off-by: Ben Dooks <ben-linux@fluff.org>
2008-11-03SDHCI: Check DMA for overruns at end of transferBen Dooks
At the end of a transfer, check that the DMA engine in the SDHCI controller actually did what it was meant to and didn't overrun the end of the buffer. This seems to be triggered by a timeout during an CMD25 (multiple block write) to a card. The mmc_block module then issues a command to find out how much data was moved and this seems to end up triggering this DMA check. The result is the card's queue generates an OOPS as the stack has been trampled on due to the extra data transfered. Signed-off-by: Ben Dooks <ben-linux@fluff.org>
2008-11-03SDHCI: Samsung SDHCI (HSMMC) driverBen Dooks
Add support for the 'HSMMC' block(s) in the Samsung SoC line. These are compatible with the SDHCI driver so add the necessary setup and driver binding for the platform devices. Signed-off-by: Ben Dooks <ben-linux@fluff.org>
2008-11-03SDHCI: Add quirk for controller with no end-of-busy IRQBen Dooks
The Samsung SDHCI controller block seems to fail to generate an INT_DATA_END after the transfer has completed and the bus busy state finished. Changes in e809517f6fa5803a5a1cd56026f0e2190fc13d5c to use the new busy method are the cause of the behaviour change. Signed-off-by: Ben Dooks <ben-linux@fluff.org>
2008-11-03SDHCI: Add set_ios hookBen Dooks
Add a set_ios hook which is called when the SDHCI driver is called to change parameters such as clock or card width. Signed-off-by: Ben Dooks <ben-linux@fluff.org>
2008-11-03SDHCI: Print ADMA status and pointer on debugBen Dooks
If using ADMA, then we should print the ADMA error and current pointer in sdhci_dumpregs() when any debug is requested. Signed-off-by: Ben Dooks <ben-linux@fluff.org>
2008-11-03SDHCI: Add timeout hooksBen Dooks
Some controllers do not provide clock information in their capabilities (in the Samsung case, it is because there are multiple clock sources available to the controller). Add hooks to allow the system to supply clock information. Signed-off-by: Ben Dooks <ben-linux@fluff.org>
2008-10-31Merge branch 'master' of ↵Ben Dooks
git://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux-2.6 into s3c64xx
2008-10-30[ARM] S3C24XX: Move mci.h to arch/arm/plat-s3c24xx/include/platBen Dooks
Move mci.h to new position in arch/arm/plat-s3c24xx/include/plat ready to clean out old include directories. Signed-off-by: Ben Dooks <ben-linux@fluff.org>
2008-10-28[ARM] 5322/1: Fix fastpath issue in mmci.cLinus Walleij
Fix fastpath issues Since mmci_request() can be called from a non-interrupt context, and does, during kernel init, causing a host of debug messages during boot if you enable spinlock debugging, we need to use the spinlock calls that save IRQ flags and restore them. Signed-off-by: Linus Walleij <triad@df.lth.se> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2008-10-21[PATCH] switch mmcAl Viro
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2008-10-21[PATCH] beginning of methods conversionAl Viro
To keep the size of changesets sane we split the switch by drivers; to keep the damn thing bisectable we do the following: 1) rename the affected methods, add ones with correct prototypes, make (few) callers handle both. That's this changeset. 2) for each driver convert to new methods. *ALL* drivers are converted in this series. 3) kill the old (renamed) methods. Note that it _is_ a flagday; all in-tree drivers are converted and by the end of this series no trace of old methods remain. The only reason why we do that this way is to keep the damn thing bisectable and allow per-driver debugging if anything goes wrong. New methods: open(bdev, mode) release(disk, mode) ioctl(bdev, mode, cmd, arg) /* Called without BKL */ compat_ioctl(bdev, mode, cmd, arg) locked_ioctl(bdev, mode, cmd, arg) /* Called with BKL, legacy */ Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2008-10-20Merge branch 'for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/drzeus/mmc * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/drzeus/mmc: s3cmci: Add Ben Dooks/Simtec Electronics to header & copyright s3cmci: fix continual accesses to host->pio_ptr s3cmci: Support transfers which are not multiple of 32 bits. s3cmci: cpufreq support s3cmci: Make general protocol errors less noisy mmc_block: tell block layer there is no seek penalty
2008-10-15Merge branch 'fixes' into for-linusRussell King
Conflicts: arch/arm/mach-versatile/core.c
2008-10-15s3cmci: Add Ben Dooks/Simtec Electronics to header & copyrightben@fluff.org.uk
Since the original authour (Thomas Kleffel) has been too busy to merge the s3cmci driver and keep it up to date, I (mostly as part of my role with Simtec Electronics) got the driver to a mergable state and have been maintaining it since I think that I should be added to the header. Also add a copyright statement for the new work. Signed-off-by: Ben Dooks <ben-linux@fluff.org> Signed-off-by: Pierre Ossman <drzeus@drzeus.cx>
2008-10-15s3cmci: fix continual accesses to host->pio_ptrben@fluff.org.uk
The s3cmci driver uses the host->pio_ptr field to point to the current position into the buffer for data transfer. During the transfers it does the following: while (fifo_words--) *(host->pio_ptr++) = readl(from_ptr); This is inefficent, as host->pio_ptr is not used in any other part of the transfer but the compiler emits code which does the following: while (fifo_words--) { u32 *ptr = host->pio_ptr; *ptr = readl(from_ptr); ptr++; host->pio_ptr = ptr; } This is obviously a waste of a load and store each time around the loop, which could be up to 16 times depending on how much needs to be transfered. Move the ptr accesses to outside the while loop so that we do not end up reloading/re-writing the pointer. Note, this seems to make the code 16 bytes larger. Signed-off-by: Ben Dooks <ben-linux@fluff.org> Signed-off-by: Pierre Ossman <drzeus@drzeus.cx>
2008-10-15s3cmci: Support transfers which are not multiple of 32 bits.Christer Weinigel
To be able to do SDIO the s3cmci driver has to support non-word-sized transfers. Change pio_words into pio_bytes and fix up all the places where it is used. This variant of the patch will not overrun the buffer when reading an odd number of bytes. When writing, this variant will still read past the end of the buffer, but since the driver can't support non-word- aligned transfers anyway, this should not be a problem, since a word-aligned transfer will never cross a page boundary. This has been tested with a CSR SDIO Bluetooth Type A device on a Samsung S3C24A0 processor. Signed-off-by: Christer Weinigel <christer@weinigel.se> Signed-off-by: Ben Dooks <ben-linux@fluff.org> Signed-off-by: Pierre Ossman <drzeus@drzeus.cx>
2008-10-15s3cmci: cpufreq supportben@fluff.org.uk
Support for cpu frequency changing. Signed-off-by: Ben Dooks <ben-linux@fluff.org> Signed-off-by: Pierre Ossman <drzeus@drzeus.cx>
2008-10-15s3cmci: Make general protocol errors less noisyben@fluff.org.uk
General errors, such as timeouts during probe do not need to be sent to the console, so move them down to be included if the debug is enabled. Such errors include: s3c2440-sdi s3c2440-sdi: s3cmci_request: no medium present Signed-off-by: Ben Dooks <ben-linux@fluff.org> Signed-off-by: Pierre Ossman <drzeus@drzeus.cx>
2008-10-14Merge branch 's3c-move' into develRussell King
Conflicts: arch/arm/mach-versatile/core.c
2008-10-14Merge branch 'omap-all' into develRussell King
Conflicts: arch/arm/mach-omap2/gpmc.c arch/arm/mach-omap2/irq.c
2008-10-14mmc_block: tell block layer there is no seek penaltyPierre Ossman
Signed-off-by: Pierre Ossman <drzeus@drzeus.cx>
2008-10-13Merge branch 'master' of ↵David Woodhouse
git://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux-2.6 Conflicts: include/asm-x86/statfs.h
2008-10-12Merge branch 'for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/drzeus/mmc * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/drzeus/mmc: (24 commits) MMC: Use timeout values from CSR MMC: CSD and CID timeout values sdhci: 'scratch' may be used uninitialized mmc: explicitly mention SDIO support in Kconfig mmc: remove redundant "depends on" Fix comment in include/linux/mmc/host.h sdio: high-speed support mmc_block: hard code 512 byte block size sdhci: force high speed capability on some controllers mmc_block: filter out PC requests mmc_block: indicate strict ordering mmc_block: inform block layer about sector count restriction sdio: give sdio irq thread a host specific name sdio: make sleep on error interruptable sdhci: reduce card detection delay sdhci: let the controller wait for busy state to end atmel-mci: Add missing flush_dcache_page() in PIO transfer code atmel-mci: Don't overwrite error bits when NOTBUSY is set atmel-mci: Add experimental DMA support atmel-mci: support multiple mmc slots ...
2008-10-12Merge branch 'master' of ↵Pierre Ossman
git://git.kernel.org/pub/scm/linux/kernel/git/hskinnemoen/atmel-mci-2.6.28 Conflicts: drivers/mmc/host/atmel-mci.c
2008-10-12MMC: Use timeout values from CSRMatthew Fleming
Hard-coded timeout values of 250ms for writes and 100ms for reads are currently used for MMC transactions over SPI. The spec states that the timeout values from the card should be used. Signed-off-by: Matthew Fleming <matthew.fleming@imgtec.com> Signed-off-by: Pierre Ossman <drzeus@drzeus.cx>
2008-10-12MMC: CSD and CID timeout valuesMatthew Fleming
The MMC spec states that the timeout for accessing the CSD and CID registers is 64 clock cycles. Signed-off-by: Matthew Fleming <matthew.fleming@imgtec.com> Signed-off-by: Pierre Ossman <drzeus@drzeus.cx>
2008-10-12sdhci: 'scratch' may be used uninitializedSteven Noonan
The variable 'scratch' is always initialized before it's used. The conditional which is responsible for initialization of 'scratch' will always evaluate 'true' when the first loop iteration occurs, and thus, it's properly initialized. GCC doesn't see this, of course, so using the uninitialized_var() macro seems to work for silencing this case. Signed-off-by: Steven Noonan <steven@uplinklabs.net> Signed-off-by: Pierre Ossman <drzeus@drzeus.cx>
2008-10-12mmc: explicitly mention SDIO support in KconfigPierre Ossman
Signed-off-by: Pierre Ossman <drzeus@drzeus.cx>
2008-10-12mmc: remove redundant "depends on"Pierre Ossman
Signed-off-by: Pierre Ossman <drzeus@drzeus.cx>
2008-10-12sdio: high-speed supportPierre Ossman
Signed-off-by: Pierre Ossman <drzeus@drzeus.cx>
2008-10-12mmc_block: hard code 512 byte block sizePierre Ossman
We use 512 byte blocks on all cards, and newer cards support nothing else, so hard code it and make the code less complex. Signed-off-by: Pierre Ossman <drzeus@drzeus.cx>
2008-10-12sdhci: force high speed capability on some controllersPierre Ossman
Some high speed capable controllers forget to set the high speed capability bit. Make sure we enable the functionality anyway. Signed-off-by: Pierre Ossman <drzeus@drzeus.cx>
2008-10-12mmc_block: filter out PC requestsPierre Ossman
We do not support PC (SCSI) commands, so don't pretend we do by letting them through. Signed-off-by: Pierre Ossman <drzeus@drzeus.cx>
2008-10-12mmc_block: indicate strict orderingPierre Ossman
The MMC block driver services requests one at a time and in strict order. Indicate this to the block layer so that it can handle barriers in an efficient manner. Signed-off-by: Pierre Ossman <drzeus@drzeus.cx>
2008-10-12mmc_block: inform block layer about sector count restrictionPierre Ossman
Make sure we consider the maximum block count when we tell the block layer about the maximum sector count. That way we don't have to chop up the request ourselves. Signed-off-by: Pierre Ossman <drzeus@drzeus.cx>
2008-10-12sdio: give sdio irq thread a host specific namePierre Ossman
There is one thread per host controller so make sure they all get unique names. Signed-off-by: Pierre Ossman <drzeus@drzeus.cx>
2008-10-12sdio: make sleep on error interruptablePierre Ossman
Make sure we can be woken from the forced sleep that is done on errors. Removing a card often results in -ENOMEDIUM or -EILSEQ so we previously locked up the removal process for a second. We could completely exit on -ENOMEDIUM, but it might be a transient glitch so treat it like any other error. Signed-off-by: Pierre Ossman <drzeus@drzeus.cx>
2008-10-12sdhci: reduce card detection delayPierre Ossman
The card detection delay was added early when the behaviour of the card interrupt was still very much unknown (i.e. before there was a public specification). As it is now known that it is a debounced signal, reduce the delay to something more sensible. Signed-off-by: Pierre Ossman <drzeus@drzeus.cx>
2008-10-12sdhci: let the controller wait for busy state to endPierre Ossman
The sdhci controllers can interrupt us when the busy state from the card has ended, saving CPU cycles and power. Signed-off-by: Pierre Ossman <drzeus@drzeus.cx>
2008-10-11Merge branch 'for-linus' of master.kernel.org:/home/rmk/linux-2.6-armLinus Torvalds
* 'for-linus' of master.kernel.org:/home/rmk/linux-2.6-arm: (236 commits) [ARM] 5300/1: fixup spitz reset during boot [ARM] 5295/1: make ZONE_DMA optional [ARM] 5239/1: Palm Zire 72 power management support [ARM] 5298/1: Drop desc_handle_irq() [ARM] 5297/1: [KS8695] Fix two compile-time warnings [ARM] 5296/1: [KS8695] Replace macro's with trailing underscores. [ARM] pxa: allow multi-machine PCMCIA builds [ARM] pxa: add preliminary CPUFREQ support for PXA3xx [ARM] pxa: add missing ACCR bit definitions to pxa3xx-regs.h [ARM] pxa: rename cpu-pxa.c to cpufreq-pxa2xx.c [ARM] pxa/zylonite: add support for USB OHCI [ARM] ohci-pxa27x: use ioremap() and offset for register access [ARM] ohci-pxa27x: introduce pxa27x_clear_otgph() [ARM] ohci-pxa27x: use platform_get_{irq,resource} for the resource [ARM] ohci-pxa27x: move OHCI controller specific registers into the driver [ARM] ohci-pxa27x: introduce flags to avoid direct access to OHCI registers [ARM] pxa: move I2S register and bit definitions into pxa2xx-i2s.c [ARM] pxa: simplify DMA register definitions [ARM] pxa: make additional DCSR bits valid for PXA3xx [ARM] pxa: move i2c register and bit definitions into i2c-pxa.c ... Fixed up conflicts in arch/arm/mach-versatile/core.c sound/soc/pxa/pxa2xx-ac97.c sound/soc/pxa/pxa2xx-i2s.c manually.
2008-10-10Merge git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi-misc-2.6Linus Torvalds
* git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi-misc-2.6: (37 commits) [SCSI] zfcp: fix double dbf id usage [SCSI] zfcp: wait on SCSI work to be finished before proceeding with init dev [SCSI] zfcp: fix erp list usage without using locks [SCSI] zfcp: prevent fc_remote_port_delete calls for unregistered rport [SCSI] zfcp: fix deadlock caused by shared work queue tasks [SCSI] zfcp: put threshold data in hba trace [SCSI] zfcp: Simplify zfcp data structures [SCSI] zfcp: Simplify get_adapter_by_busid [SCSI] zfcp: remove all typedefs and replace them with standards [SCSI] zfcp: attach and release SAN nameserver port on demand [SCSI] zfcp: remove unused references, declarations and flags [SCSI] zfcp: Update message with input from review [SCSI] zfcp: add queue_full sysfs attribute [SCSI] scsi_dh: suppress comparison warning [SCSI] scsi_dh: add Dell product information into rdac device handler [SCSI] qla2xxx: remove the unused SCSI_QLOGIC_FC_FIRMWARE option [SCSI] qla2xxx: fix printk format warnings [SCSI] qla2xxx: Update version number to 8.02.01-k8. [SCSI] qla2xxx: Ignore payload reserved-bits during RSCN processing. [SCSI] qla2xxx: Additional residual-count corrections during UNDERRUN handling. ...