aboutsummaryrefslogtreecommitdiff
path: root/drivers
AgeCommit message (Collapse)Author
2006-09-16[PATCH] hvc_console suspend fixAndrew Morton
Fix http://bugzilla.kernel.org/show_bug.cgi?id=7152 Cc: Michael Tautschnig <tautschn@model.in.tum.de> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-09-16[PATCH] IPMI: Fix oops on ipmi_msghandler removal for non ipmi systemsArnaud Patard
When the ipmi_si module is loaded on a system without any ipmi device, it fails with nodev. It would be fine if all resources were freed. A call to device_unregister() is missing, resulting to a oops when you remove the ipmi_msghandler. Signed-off-by: Arnaud Patard <apatard@mandriva.com> Acked-by: Corey Minyard <minyard@acm.org> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-09-16MTD: Fix bug in fixup_convert_atmel_priHåvard Skinnemoen
The memset() in fixup_convert_atmel_pri is supposed to zero out everything except the first 5 bytes in *extp, but it ends up zeroing out something way outside the struct instead. Fix this potentially dangerous code by casting the pointer to char * before doing arithmetic. Signed-off-by: Håvard Skinnemoen <hskinnemoen@atmel.com> Signed-off-by: David Woodhouse <dwmw2@infradead.org>
2006-09-14RDMA/cma: Increase the IB CM retry count in CMAMichael S. Tsirkin
3 seems like a low number of IB Communication Manager retries to set; we see connections failing under stress, and in any case 3 just looks like an arbitrary number. 15 is the max value allowed by the InfiniBand spec. Signed-off-by: Michael S. Tsirkin <mst@mellanox.co.il> Acked-by: Sean Hefty <sean.hefty@intel.com> Signed-off-by: Roland Dreier <rolandd@cisco.com>
2006-09-14IPoIB: Retry failed send-only multicast group joinsEli Cohen
When a send-only multicast group join fails, mcast->query must be set to NULL. Otherwise, IPoIB will never retry the join and the multicast group will never be reachable. Signed-off-by: Eli Cohen <eli@mellanox.co.il> Signed-off-by: Michael S. Tsirkin <mst@mellanox.co.il> Signed-off-by: Roland Dreier <rolandd@cisco.com>
2006-09-14IB/srp: Don't schedule reconnect from srpIshai Rabinovitz
If there is a problem in the connection, the SCSI mid-layer will eventually call srp_reset_host(), which will call srp_reconnect(), so we do not need to schedule a call to srp_reconnect_work() from srp_completion(). Removing this prevents srp_reset_host() from failing if a reconnect scheduled from srp_completion() is already in progress, which in turn was causing crashes as both SCSI midlayer and srp_reconnect() were cancelling commands. Signed-off-by: Ishai Rabinovitz <ishai@mellanox.co.il> Signed-off-by: Michael S. Tsirkin <mst@mellanox.co.il> Signed-off-by: Roland Dreier <rolandd@cisco.com>
2006-09-13[PATCH] mv643xx_eth: Unmap DMA buffers in receive pathDale Farnsworth
Fix a missing call to dma_unmap_single() in the receive path. Without this call, errors have been observed on non-cache-coherent systems. Signed-off-by Dale Farnsworth <dale@farnsworth.org> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2006-09-13[PATCH] cciss: version update, new hwMike Miller
Add support for new hardware and bumps the version to 3.6.10. It seems there were several changes introduced including soft_irq. I decided to bump the major number to reflect these changes. Since we're still supporting older vendor kernels I need some way differentiate between kernel versions <=2.6.10 and newer kernels >=2.6.16. Signed-off-by: Mike Miller <mike.miller@hp.com> Cc: Jens Axboe <axboe@suse.de> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-09-13[PATCH] SCSI: lockdep annotation in scsi_send_eh_cmndStefan Richter
Fixup for lockdep enabled kernels: Annotate an on-stack completion. Signed-off-by: Stefan Richter <stefanr@s5r6.in-berlin.de> Acked-by: Ingo Molnar <mingo@elte.hu> Cc: James Bottomley <James.Bottomley@steeleye.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-09-13[PATCH] alim15x3.c: M5229 (rev c8) support for DMA cd-writerMichael De Backer
Configuration bits are not set properly for DMA on some chipset revisions. It has already been corrected for M5229 (rev c7) but not for M5229 (rev c8). This leads to the bug described at http://bugzilla.kernel.org/show_bug.cgi?id=5786 (lost interrupt + ide bus hangs). Signed-off-by: Michael De Backer <micdb@skynet.be> Acked-by: Alan Cox <alan@lxorguk.ukuu.org.uk> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-09-13[PATCH] libata: ignore CFA signature while sanity-checking an ATAPI deviceTejun Heo
0x848a in ID word 0 indicates CFA device iff the ID data is obtained from IDENTIFY DEVICE. For ATAPI devices, 0x848a in ID work 0 indicates valid ATAPI device. Fix sanity check in ata_dev_read_id() such that ATAPI devices reporting 0x848a in ID word 0 is not handled as error. The problem is identified by J.A. Magallon with HL-DT-ST DVDRAM GSA-4120B. Signed-off-by: Tejun Helo <htejun@gmail.com> Cc: J.A. Magallon <jamagallon@ono.com> Acked-by: Jeff Garzik <jeff@garzik.org> Acked-by: Alan Cox <alan@redhat.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-09-13Merge branch 'master' into upstream-fixesJeff Garzik
2006-09-12Merge master.kernel.org:/pub/scm/linux/kernel/git/mchehab/v4l-dvbLinus Torvalds
* master.kernel.org:/pub/scm/linux/kernel/git/mchehab/v4l-dvb: V4L/DVB (4608c): Fix I2C dependencies for saa7146 modules V4L/DVB (4608b): i2c deps fix on DVB V4L/DVB (4605): Fixes an issue with V4L1 and make headers-install V4L/DVB (4520): Fix an error when loading bttv driver on PV M4900. V4L/DVB (4511): Restore tuner_ymec_tvf66t5_b_dff_pal_ranges[] to fix UHF switch functionality V4L/DVB (4494a): Fix compilation when V4L1 support is not present
2006-09-12Merge master.kernel.org:/pub/scm/linux/kernel/git/gregkh/usb-2.6Linus Torvalds
* master.kernel.org:/pub/scm/linux/kernel/git/gregkh/usb-2.6: USB: Fix unload oops and memory leak in yealink driver usbserial: Reference leak
2006-09-12[PATCH] e1000: fix TX timout hang regression for 82542rev3Auke Kok
Commit 581d708eb47cccb5f41bc0817e50c9b004011ba8 (oct. 5 2005) introduced partial Multiqueue support for e1000 which broke macro smartness in setting up head/tail registers for 82542 rev3 chipsets, making these adapters completely non-working since 2.6.15. This commit sets the proper head and tail registers for read and write descriptor rings. Ths fix was tested on an 82542 rev3 NIC and newer NICs. Signed-off-by: Auke Kok <auke-jan.h.kok@intel.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2006-09-12Merge branch 'upstream-fixes' of ↵Jeff Garzik
git://git.kernel.org/pub/scm/linux/kernel/git/linville/wireless-2.6 into upstream-fixes
2006-09-12USB: Fix unload oops and memory leak in yealink driverHenk Vergonet
This patch fixes a memory leak and a kernel oops when trying to unload the driver, due to an unbalanced cleanup. Thanks Ivar Jensen for spotting my mistake. Signed-off-by: Henk Vergonet <henk.vergonet@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2006-09-12usbserial: Reference leakMatthias Urlichs
A sufficiently-large number of USB serial devices causes a reference leak when /proc/tty/drivers/usbserial is read. Signed-Off-By: Matthias Urlichs <smurf@smurf.noris.de> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2006-09-12sh64: Trivial build fixes.Paul Mundt
While we've been sorting out the toolchain fiasco, some of the code has suffered a bit of bitrot. Building with GCC4 also brings up some more build warnings. Trivial fixes for both issues. Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2006-09-11[PATCH] zd1211rw: Fix of signal strength and quality measurementUlrich Kunitz
Caused by a documentation issue I mixed up fields of the zd_status structure. This patch fixes it and improves also the average computation, which is now using only measurements of packets sent by the access point. Signed-off-by: Ulrich Kunitz <kune@deine-taler.de> Signed-off-by: Daniel Drake <dsd@gentoo.org> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2006-09-11Merge master.kernel.org:/pub/scm/linux/kernel/git/gregkh/usb-2.6Linus Torvalds
* master.kernel.org:/pub/scm/linux/kernel/git/gregkh/usb-2.6: usbtouchscreen: fix ITM data reading USB: New device ID for ftdi_sio usb serial driver USB: Support for USB20SVGA-WH & USB20SVGA-DG USB: hid-core.c: fix duplicate USB_DEVICE_ID_GTCO_404
2006-09-11Merge master.kernel.org:/home/rmk/linux-2.6-mmcLinus Torvalds
* master.kernel.org:/home/rmk/linux-2.6-mmc: [MMC] Always use a sector size of 512 bytes [MMC] Cleanup 385e3227d4d83ab13d7767c4bb3593b0256bf246 [ARM] 3751/1: i.MX/MX1 SD/MMC use 512 bytes request for SCR read [MMC] Fix SD timeout calculation [MMC] constify mmc_host_ops
2006-09-11Merge branch 'upstream-linus' of ↵Linus Torvalds
master.kernel.org:/pub/scm/linux/kernel/git/jgarzik/netdev-2.6 * 'upstream-linus' of master.kernel.org:/pub/scm/linux/kernel/git/jgarzik/netdev-2.6: [PATCH] Fix dm9000 release_resource
2006-09-11Merge branch 'upstream-linus' of ↵Linus Torvalds
master.kernel.org:/pub/scm/linux/kernel/git/jgarzik/libata-dev * 'upstream-linus' of master.kernel.org:/pub/scm/linux/kernel/git/jgarzik/libata-dev: [PATCH] ata_piix: add map 01b for ICH7M [libata] sata_mv: errata check buglet fix
2006-09-11[PATCH] Fix 2.6.18-rc6 IDE breakage, add missing ident needed for current ↵Alan Cox
VIA boards There are two changes here. The first reverses the broken PCI_DEVICE conversion back to the old format. The second adds a missing PCI ID so you can actually boot 2.6.18 on 2 month old VIA motherboards (right now only 2.6.18-mm works). CC'd to Jeff to check the PCI ident but its a) in several distro kernels and b) in 2.6.18-mm [twice ??] Signed-off-by: Alan Cox <alan@redhat.com> Cc: Jeff Garzik <jeff@garzik.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-09-11[PATCH] Fix dm9000 release_resourceDirk Opfer
dm9000_release_board calls release_resource with the platform resource instead of the requested resource: db->addr_res = platform_get_resource(pdev, IORESOURCE_MEM, 0); db->addr_req = request_mem_region(db->addr_res->start, i, pdev->name); dm9000_release_board: if (db->addr_res != NULL) { release_resource(db->addr_res); kfree(db->addr_req); With this behavior the kernel will crash on the second removal. The attached patch fix this problem. Signed-off-by: Dirk Opfer <Dirk@Opfer-Online.de> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2006-09-11[PATCH] ata_piix: add map 01b for ICH7MTejun Heo
Although the document says otherwise, some ich7m uses map 01b. This patch adds separate map DB for ICH7M and adds map entry for 01b. This was spotted on an ASUS laptop by Jonathan Dieter. Signed-off-by: Tejun Heo <htejun@gmail.com> Cc: Jonathan Dieter <jdieter@gmail.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2006-09-11[libata] sata_mv: errata check buglet fixAndres Salomon
Fix a buglet; the errata check below this code is assuming the value in the sstatus variable is what was pulled out of the SCR_STATUS register. However, the status checks in the timeout loop clobber everything but the first 4 bits of sstatus, so the errata checks are invalid. This patch changes it to not clobber SStatus. Signed-off-by: Andres Salomon <dilinger@debian.org> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2006-09-10V4L/DVB (4608c): Fix I2C dependencies for saa7146 modulesMauro Carvalho Chehab
Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2006-09-10V4L/DVB (4608b): i2c deps fix on DVBAndrew de Quincey
Several DVB modules depends on I2C Signed-off-by: Andrew de Quincey <adq_dvb@lidskialf.net> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2006-09-10V4L/DVB (4605): Fixes an issue with V4L1 and make headers-installMauro Carvalho Chehab
V4L1 support should be disabled when no CONFIG_VIDEO_V4L1_COMPAT is defined, to allow checking for broken V4L2 ports. This is very important during the migration phase for V4L2 API. However, userspace apps should be capable of using both APIs, since they need to test at runtime, via VIDIOCGCAP ioctl, if V4L1 is supported. So, when __KERNEL__ is not defined, those ioctls and corresponding structs should be visible. This patch also removes the obsolete defines HAVE_V4L1 and HAVE_V4L2, that where causing some confusion, and were replaced by CONFIG_VIDEO_V4L1_COMPAT and CONFIG_VIDEO_V4L2. Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2006-09-10V4L/DVB (4520): Fix an error when loading bttv driver on PV M4900.Mauro Carvalho Chehab
Previously, this were reported: Ooops: IR config error [card=139] Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2006-09-10V4L/DVB (4511): Restore tuner_ymec_tvf66t5_b_dff_pal_ranges[] to fix UHF ↵Hermann Pitton
switch functionality The tena_9533_di_pal_ranges use 0x04 instead the original 0x08 for the UHF (range 2) switching. This is wrong and therefore nothing happens. Restore tuner_ymec_tvf66t5_b_dff_pal_ranges[] to make the UHF switch working again. Signed-off-by: Hermann Pitton <hermann-pitton@arcor.de> Signed-off-by: Michael Krufky <mkrufky@linuxtv.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2006-09-10V4L/DVB (4494a): Fix compilation when V4L1 support is not presentMauro Carvalho Chehab
VIDIOCGMBUF should be compiled only when V4L1 support is selected, since this ioctl is from the obsoleted API. Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2006-09-08[PATCH] sis5513: add SiS south bridge ID 0x966 and 0x968David Wang
New SiS south bridge device ID is 0x966. Next coming product will be 0x968. (Will be released in Q4, this year) We don't make any updates to the IDE controller. Signed-off-by: David Wang <touch@sis.com> Cc: Jeff Garzik <jeff@garzik.org> Cc: Alan Cox <alan@lxorguk.ukuu.org.uk> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-09-08[PATCH] optical /proc/ide/*/mediaAlexey Dobriyan
Sergey Vlasov reported that his "FUJITSU MCC3064AP, ATAPI OPTICAL drive" pops up as UNKNOWN in /proc/ide/*/media . Closes #4145. Signed-off-by: Alexey Dobriyan <adobriyan@gmail.com> Cc: Alan Cox <alan@lxorguk.ukuu.org.uk> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-09-07usbtouchscreen: fix ITM data readingKai Lindhom
From: Kai Lindhom <megantti@gmail.com> Signed-off-by: Daniel Ritz <daniel.ritz@gmx.ch> Acked-by: Dmitry Torokhov <dtor@mail.ru> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2006-09-07USB: New device ID for ftdi_sio usb serial driverRalf Schlatterbeck
The patch adds a new device ID for the Gamma Scout Geiger counter device. Signed-off-by: Ralf Schlatterbeck <rsc@runtux.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2006-09-07USB: Support for USB20SVGA-WH & USB20SVGA-DGNobuhiro Iwamatsu
This patch is support USB20SVGA-WH & USB20SVGA-DG of the sisusb device. As for this device, Device ID is different according to the color of the product. A blue device is supported. However, a green, white device is not supported. http://www.lubic.jp/uv_method.html ( Japanese only ) . Green, white USB20SVGA comes to work by applying the patch . And, it be able to use three USB20SVGA( Blue , Green , White ). Signed-off-by: Nobuhiro Iwamatsu <hemamu@t-base.ne.jp> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2006-09-07USB: hid-core.c: fix duplicate USB_DEVICE_ID_GTCO_404Adrian Bunk
On Fri, Sep 01, 2006 at 01:58:18AM -0700, Andrew Morton wrote: >... > Changes since 2.6.18-rc4-mm3: >... > +gregkh-usb-hid-core.c-adds-all-gtco-calcomp-digitizers-and-interwrite-school-products-to-blacklist.patch >... > USB tree updates. >... The GNU C compiler spotted the following bug: <-- snip --> ... CC drivers/usb/input/hid-core.o /home/bunk/linux/kernel-2.6/linux-2.6.18-rc5-mm1/drivers/usb/input/hid-core.c:1446:1: warning: "USB_DEVICE_ID_GTCO_404" redefined /home/bunk/linux/kernel-2.6/linux-2.6.18-rc5-mm1/drivers/usb/input/hid-core.c:1445:1: warning: this is the location of the previous definition ... <-- snip --> This patch fixes this cut'n'paste error. Signed-off-by: Adrian Bunk <bunk@stusta.de> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2006-09-07[MMC] Always use a sector size of 512 bytesPierre Ossman
Both MMC and SD specifications specify (although a bit unclearly in the MMC case) that a sector size of 512 bytes must always be supported by the card. Cards can report larger "native" size than this, and cards >= 2 GB even must do so. Most other readers use 512 bytes even for these cards. We should do the same to be compatible. Signed-off-by: Pierre Ossman <drzeus@drzeus.cx> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2006-09-07[MMC] Cleanup 385e3227d4d83ab13d7767c4bb3593b0256bf246Russell King
Rather than having two places which independently calculate the timeout for data transfers, make it a library function instead. Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk> Acked-by: Pierre Ossman <drzeus@drzeus.cx>
2006-09-07[ARM] 3751/1: i.MX/MX1 SD/MMC use 512 bytes request for SCR readPavel Pisa
Patch from Pavel Pisa This is another approach to SDHC deficiency workaround. It seems, that previous solution based on 16 bytes (FIFO length size) read is still timing sensitive on genirq and fully preemptive kernels. The new solution is backuped by M9328 UM statement, that only 512 byte block are working properly and by 2.4.26 FreeScale's SDHC code. Jay Monkman reports significant improvement on code based on this driver after applying this change on MX21 as well. Signed-off-by: Pavel Pisa <pisa@cmp.felk.cvut.cz> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2006-09-07[MMC] Fix SD timeout calculationPierre Ossman
Secure Digital cards use a different algorithm to calculate the timeout for data transfers. Using the MMC one works often, but not always. Signed-off-by: Pierre Ossman <drzeus@drzeus.cx> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2006-09-06[PATCH] myri10ge: update the firmware download URL in KconfigBrice Goglin
Update the firmware download URL in Kconfig to match the header in drivers/net/myri10ge/myri10ge.c. Signed-off-by: Brice Goglin <brice@myri.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2006-09-05[PATCH] [MTD] DEVICES: Fill more device IDs in the structure of m25p80Aubrey Lee
The flash_info structure has a bunch of missing fields which causes problems when actually tryin to use some ST parts as it gets detected incorrectly. Signed-off-by: Aubrey L1 <aubreylee@gmail.com> Signed-off-by: Josh Boyer <jwboyer@gmail.com>
2006-09-02Merge master.kernel.org:/home/rmk/linux-2.6-serialLinus Torvalds
* master.kernel.org:/home/rmk/linux-2.6-serial: [SERIAL] 8250: constify some serial structs [SERIAL] Make uart_match_port() work with all memory mapped UARTs
2006-09-01Merge master.kernel.org:/pub/scm/linux/kernel/git/gregkh/usb-2.6Linus Torvalds
* master.kernel.org:/pub/scm/linux/kernel/git/gregkh/usb-2.6: uhci-hcd: fix list access bug USB: Support for ELECOM LD-USB20 in pegasus USB: Add VIA quirk fixup for VT8235 usb2 USB: rtl8150_disconnect() needs tasklet_kill() USB Storage: unusual_devs.h for Sony Ericsson M600i USB Storage: Remove the finecam3 unusual_devs entry UHCI: don't stop at an Iso error usb gadget: g_ether spinlock recursion fix USB: add all wacom device to hid-core.c blacklist hid-core.c: Adds all GTCO CalComp Digitizers and InterWrite School Products to blacklist USB floppy drive SAMSUNG SFD-321U/EP detected 8 times
2006-09-01[PATCH] backlight last round of fixesBenjamin Herrenschmidt
Fix some more problems (inverted use of semaphores in some places). He also moved my checks into within the protected section which is better. Signed-off-by: Michael Hanselmann <linux-kernel@hansmi.ch> Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org> Cc: "Antonino A. Daplas" <adaplas@pol.net> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-09-01[PATCH] sgiioc4: fixup use of mmio opsJohn Keller
Fix some bugs in the patch that converted the IOC4 driver from port IO ops to memio ops. http://marc.theaimsgroup.com/?l=linux-ide&m=114895892231438&w=2 Problems fixed are: - Call to default_hwif_mmiops() was not being done until _after_ first IO operation, resulting in the first IO operation being done as a port IO op, instead of memio. - request_region() calls needed to be request_mem_region() - Incomplete error case handling. - Non-usage of ioremap() and __iomem. Signed-off-by: John Keller <jpk@sgi.com> Signed-off-by: Jeremy Higdon <jeremy@sgi.com> Cc: Alan Cox <alan@lxorguk.ukuu.org.uk> Cc: Bartlomiej Zolnierkiewicz <B.Zolnierkiewicz@elka.pw.edu.pl> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
generated by cgit v1.2.3 (git 2.25.1) at 2024-07-30 12:13:56 +0000