aboutsummaryrefslogtreecommitdiff
path: root/fs/dlm/recoverd.c
AgeCommit message (Collapse)Author
2008-04-21dlm: recover nodes that are removed and re-addedDavid Teigland
If a node is removed from a lockspace, and then added back before the dlm is notified of the removal, the dlm will not detect the removal and won't clear the old state from the node. This is fixed by using a list of added nodes so the membership recovery can detect when a newly added node is already in the member list. Signed-off-by: David Teigland <teigland@redhat.com>
2008-01-30dlm: keep cached master rsbs during recoveryDavid Teigland
To prevent the master of an rsb from changing rapidly, an unused rsb is kept on the "toss list" for a period of time to be reused. The toss list was being cleared completely for each recovery, which is unnecessary. Much of the benefit of the toss list can be maintained if nodes keep rsb's in their toss list that they are the master of. These rsb's need to be included when the resource directory is rebuilt during recovery. Signed-off-by: David Teigland <teigland@redhat.com>
2007-10-10[DLM] block dlm_recv in recovery transitionDavid Teigland
Introduce a per-lockspace rwsem that's held in read mode by dlm_recv threads while working in the dlm. This allows dlm_recv activity to be suspended when the lockspace transitions to, from and between recovery cycles. The specific bug prompting this change is one where an in-progress recovery cycle is aborted by a new recovery cycle. While dlm_recv was processing a recovery message, the recovery cycle was aborted and dlm_recoverd began cleaning up. dlm_recv decremented recover_locks_count on an rsb after dlm_recoverd had reset it to zero. This is fixed by suspending dlm_recv (taking write lock on the rwsem) before aborting the current recovery. The transitions to/from normal and recovery modes are simplified by using this new ability to block dlm_recv. The switch from normal to recovery mode means dlm_recv goes from processing locking messages, to saving them for later, and vice versa. Races are avoided by blocking dlm_recv when setting the flag that switches between modes. Signed-off-by: David Teigland <teigland@redhat.com> Signed-off-by: Steven Whitehouse <swhiteho@redhat.com>
2007-07-09[DLM] add lock timeouts and warnings [2/6]David Teigland
New features: lock timeouts and time warnings. If the DLM_LKF_TIMEOUT flag is set, then the request/conversion will be canceled after waiting the specified number of centiseconds (specified per lock). This feature is only available for locks requested through libdlm (can be enabled for kernel dlm users if there's a use for it.) If the new DLM_LSFL_TIMEWARN flag is set when creating the lockspace, then a warning message will be sent to userspace (using genetlink) after a request/conversion has been waiting for a given number of centiseconds (configurable per node). The time warnings will be used in the future to do deadlock detection in userspace. Signed-off-by: David Teigland <teigland@redhat.com> Signed-off-by: Steven Whitehouse <swhiteho@redhat.com>
2007-02-05[DLM] change some log_error to log_debugDavid Teigland
Some common, non-error messages should use log_debug instead of log_error so they can be turned off. Signed-off-by: David Teigland <teigland@redhat.com> Signed-off-by: Steven Whitehouse <swhiteho@redhat.com>
2006-11-30[DLM] fix format warnings in rcom.c and recoverd.cRyusuke Konishi
This fixes the following gcc warnings generated on the architectures where uint64_t != unsigned long long (e.g. ppc64). fs/dlm/rcom.c:154: warning: format '%llx' expects type 'long long unsigned int', but argument 4 has type 'uint64_t' fs/dlm/rcom.c:154: warning: format '%llx' expects type 'long long unsigned int', but argument 5 has type 'uint64_t' fs/dlm/recoverd.c:48: warning: format '%llx' expects type 'long long unsigned int', but argument 3 has type 'uint64_t' fs/dlm/recoverd.c:202: warning: format '%llx' expects type 'long long unsigned int', but argument 3 has type 'uint64_t' fs/dlm/recoverd.c:210: warning: format '%llx' expects type 'long long unsigned int', but argument 3 has type 'uint64_t' Signed-off-by: Ryusuke Konishi <ryusuke@osrg.net> Signed-off-by: Patrick Caulfield <pcaulfie@redhat.com> Signed-off-by: Steven Whitehouse <swhiteho@redhat.com>
2006-11-30[DLM] fix add_requestqueue checking nodes listDavid Teigland
Requests that arrive after recovery has started are saved in the requestqueue and processed after recovery is done. Some of these requests are purged during recovery if they are from nodes that have been removed. We move the purging of the requests (dlm_purge_requestqueue) to later in the recovery sequence which allows the routine saving requests (dlm_add_requestqueue) to avoid filtering out requests by nodeid since the same will be done by the purge. The current code has add_requestqueue filtering by nodeid but doesn't hold any locks when accessing the list of current nodes. This also means that we need to call the purge routine when the lockspace is being shut down since the add routine will not be rejecting requests itself any more. Signed-off-by: David Teigland <teigland@redhat.com> Signed-off-by: Steven Whitehouse <swhiteho@redhat.com>
2006-11-30[DLM] do full recover_locks barrierDavid Teigland
Red Hat BZ 211914 The previous patch "[DLM] fix aborted recovery during node removal" was incomplete as discovered with further testing. It set the bit for the RS_LOCKS barrier but did not then wait for the barrier. This is often ok, but sometimes it will cause yet another recovery hang. If it's a new node that also has the lowest nodeid that skips the barrier wait, then it misses the important step of collecting and reporting the barrier status from the other nodes (which is the job of the low nodeid in the barrier wait routine). Signed-off-by: David Teigland <teigland@redhat.com> Signed-off-by: Steven Whitehouse <swhiteho@redhat.com>
2006-11-30[DLM] fix stopping unstarted recoveryDavid Teigland
Red Hat BZ 211914 When many nodes are joining a lockspace simultaneously, the dlm gets a quick sequence of stop/start events, a pair for adding each node. dlm_controld in user space sends dlm_recoverd in the kernel each stop and start event. dlm_controld will sometimes send the stop before dlm_recoverd has had a chance to take up the previously queued start. The stop aborts the processing of the previous start by setting the RECOVERY_STOP flag. dlm_recoverd is erroneously clearing this flag and ignoring the stop/abort if it happens to take up the start after the stop meant to abort it. The fix is to check the sequence number that's incremented for each stop/start before clearing the flag. Signed-off-by: David Teigland <teigland@redhat.com> Signed-off-by: Steven Whitehouse <swhiteho@redhat.com>
2006-11-30[DLM] fix aborted recovery during node removalDavid Teigland
Red Hat BZ 211914 With the new cluster infrastructure, dlm recovery for a node removal can be aborted and restarted for a node addition. When this happens, the restarted recovery isn't aware that it's doing recovery for the earlier removal as well as the addition. So, it then skips the recovery steps only required when nodes are removed. This can result in locks not being purged for failed/removed nodes. The fix is to check for removed nodes for which recovery has not been completed at the start of a new recovery sequence. Signed-off-by: David Teigland <teigland@redhat.com> Signed-off-by: Steven Whitehouse <swhiteho@redhat.com>
2006-08-25[DLM] add new lockspace to list ealierDavid Teigland
When a new lockspace was being created, the recoverd thread was being started for it before the lockspace was added to the global list of lockspaces. The new thread was looking up the lockspace in the global list and sometimes not finding it due to the race with the original thread adding it to the list. We need to add the lockspace to the global list before starting the thread instead of after, and if the new thread can't find the lockspace for some reason, it should return an error. Signed-off-by: David Teigland <teigland@redhat.com> Signed-off-by: Steven Whitehouse <swhiteho@redhat.com>
2006-08-09[DLM] abort recovery more quicklyDavid Teigland
When we abort one recovery to do another, break out of the ping_members() routine more quickly, and wake up the dlm_recoverd thread more quickly instead of waiting for it to time out. Signed-off-by: David Teigland <teigland@redhat.com> Signed-off-by: Steven Whitehouse <swhiteho@redhat.com>
2006-01-20[DLM] Update DLM to the latest patch levelDavid Teigland
Signed-off-by: David Teigland <teigland@redhat.com> Signed-off-by: Steve Whitehouse <swhiteho@redhat.com>
2006-01-18[DLM] The core of the DLM for GFS2/CLVMDavid Teigland
This is the core of the distributed lock manager which is required to use GFS2 as a cluster filesystem. It is also used by CLVM and can be used as a standalone lock manager independantly of either of these two projects. It implements VAX-style locking modes. Signed-off-by: David Teigland <teigland@redhat.com> Signed-off-by: Steve Whitehouse <swhiteho@redhat.com>