aboutsummaryrefslogtreecommitdiff
path: root/net/sunrpc/xprtsock.c
AgeCommit message (Collapse)Author
2009-01-22MERGE-via-pending-tracking-hist-MERGE-via-stable-tracking-MERGE-via-mokopatc ↵merge
hes-tracking-fix-stray-endmenu-patch-1232632040-1232632141 pending-tracking-hist top was MERGE-via-stable-tracking-MERGE-via-mokopatches-tracking-fix-stray-endmenu-patch-1232632040-1232632141 / fdf777a63bcb59e0dfd78bfe2c6242e01f6d4eb9 ... parent commitmessage: From: merge <null@invalid> MERGE-via-stable-tracking-hist-MERGE-via-mokopatches-tracking-fix-stray-endmenu-patch-1232632040 stable-tracking-hist top was MERGE-via-mokopatches-tracking-fix-stray-endmenu-patch-1232632040 / 90463bfd2d5a3c8b52f6e6d71024a00e052b0ced ... parent commitmessage: From: merge <null@invalid> MERGE-via-mokopatches-tracking-hist-fix-stray-endmenu-patch mokopatches-tracking-hist top was fix-stray-endmenu-patch / 3630e0be570de8057e7f8d2fe501ed353cdf34e6 ... parent commitmessage: From: Andy Green <andy@openmoko.com> fix-stray-endmenu.patch Signed-off-by: Andy Green <andy@openmoko.com>
2008-10-28SUNRPC: Respond promptly to server TCP resetsTrond Myklebust
If the server sends us an RST error while we're in the TCP_ESTABLISHED state, then that will not result in a state change, and so the RPC client ends up hanging forever (see http://bugzilla.kernel.org/show_bug.cgi?id=11154) We can intercept the reset by setting up an sk->sk_error_report callback, which will then allow us to initiate a proper shutdown and retry... We also make sure that if the send request receives an ECONNRESET, then we shutdown too... Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
2008-10-13net: Rationalise email address: Network Specific PartsAlan Cox
Clean up the various different email addresses of mine listed in the code to a single current and valid address. As Dave says his network merges for 2.6.28 are now done this seems a good point to send them in where they won't risk disrupting real changes. Signed-off-by: Alan Cox <alan@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2008-07-09SUNRPC: Ensure all transports set rq_xtime consistentlyChuck Lever
The RPC client uses the rq_xtime field in each RPC request to determine the round-trip time of the request. Currently, the rq_xtime field is initialized by each transport just before it starts enqueing a request to be sent. However, transports do not handle initializing this value consistently; sometimes they don't initialize it at all. To make the measurement of request round-trip time consistent for all RPC client transport capabilities, pull rq_xtime initialization into the RPC client's generic transport logic. Now all transports will get a standardized RTT measure automatically, from: xprt_transmit() to xprt_complete_rqst() This makes round-trip time calculation more accurate for the TCP transport. The socket ->sendmsg() method can return "-EAGAIN" if the socket's output buffer is full, so the TCP transport's ->send_request() method may call the ->sendmsg() method repeatedly until it gets all of the request's bytes queued in the socket's buffer. Currently, the TCP transport sets the rq_xtime field every time through that loop so the final value is the timestamp just before the *last* call to the underlying socket's ->sendmsg() method. After this patch, the rq_xtime field contains a timestamp that reflects the time just before the *first* call to ->sendmsg(). This is consequential under heavy workloads because large requests often take multiple ->sendmsg() calls to get all the bytes of a request queued. The TCP transport causes the request to sleep until the remote end of the socket has received enough bytes to clear space in the socket's local output buffer. This delay can be quite significant. The method introduced by this patch is a more accurate measure of RTT for stream transports, since the server can cause enough back pressure to delay (ie increase the latency of) requests from the client. Additionally, this patch corrects the behavior of the RDMA transport, which entirely neglected to initialize the rq_xtime field. RPC performance metrics for RDMA transports now display correct RPC request round trip times. Signed-off-by: Chuck Lever <chuck.lever@oracle.com> Acked-by: Tom Talpey <thomas.talpey@netapp.com> Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
2008-04-24Merge branch 'devel'Trond Myklebust
2008-04-19SUNRPC: Don't disconnect more than once if retransmitting NFSv4 requestsTrond Myklebust
NFSv4 requires us to ensure that we break the TCP connection before we're allowed to retransmit a request. However in the case where we're retransmitting several requests that have been sent on the same connection, we need to ensure that we don't interfere with the attempt to reconnect and/or break the connection again once it has been established. We therefore introduce a 'connection' cookie that is bumped every time a connection is broken. This allows requests to track if they need to force a disconnection. Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
2008-04-19SUNRPC: remove XS_SENDMSG_RETRYTrond Myklebust
The condition for exiting from the loop in xs_tcp_send_request() should be that we find we're not making progress (i.e. number of bytes sent is 0). Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
2008-04-19SUNRPC: Fix up xprt_write_space()Trond Myklebust
The rest of the networking layer uses SOCK_ASYNC_NOSPACE to signal whether or not we have someone waiting for buffer memory. Convert the SUNRPC layer to use the same idiom. Remove the unlikely()s in xs_udp_write_space and xs_tcp_write_space. In fact, the most common case will be that there is nobody waiting for buffer space. SOCK_NOSPACE is there to tell the TCP layer whether or not the cwnd was limited by the application window. Ensure that we follow the same idiom as the rest of the networking layer here too. Finally, ensure that we clear SOCK_ASYNC_NOSPACE once we wake up, so that write_space() doesn't keep waking things up on xprt->pending. Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
2008-03-05net: replace remaining __FUNCTION__ occurrencesHarvey Harrison
__FUNCTION__ is gcc-specific, use __func__ Signed-off-by: Harvey Harrison <harvey.harrison@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2008-02-28SUNRPC: Ensure that we read all available tcp dataTrond Myklebust
Don't stop until we run out of data, or we hit an error. Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
2008-01-30SUNRPC: Clean up functions that free address_strings arrayChuck Lever
Clean up: document the rule (kfree) and the exceptions (RPC_DISPLAY_PROTO and RPC_DISPLAY_NETID) when freeing the objects in a transport's address_strings array. Signed-off-by: Chuck Lever <chuck.lever@oracle.com> Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
2008-01-30SUNRPC: fewer conditionals in the format_ip_address routinesChuck Lever
Clean up: have the set up routines explicitly pass the strings to be used for the transport name and NETID. This removes a number of conditionals and dependencies on rpc_xprt.prot, which is overloaded. Tighten up type checking on the address_strings array while we're at it. Signed-off-by: Chuck Lever <chuck.lever@oracle.com> Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
2008-01-30SUNRPC: Add support for per-client timeout valuesTrond Myklebust
In order to be able to support setting the timeo and retrans parameters on a per-mountpoint basis, we move the rpc_timeout structure into the rpc_clnt. Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
2008-01-30SUNRPC: Clean up the transport timeout initialisationTrond Myklebust
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
2008-01-30SUNRPC: Reconnect immediately whenever the server isn't refusing it.Trond Myklebust
If we've disconnected from the server, rather than the other way round, then it makes little sense to wait 3 seconds before reconnecting. Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
2008-01-30SUNRPC: Rename xprt_disconnect()Trond Myklebust
xprt_disconnect() should really only be called when the transport shutdown is completed, and it is time to wake up any pending tasks. Rename it to xprt_disconnect_done() in order to reflect the semantical change. Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
2008-01-30SUNRPC: Make call_status()/call_decode() call xprt_force_disconnect()Trond Myklebust
Move the calls to xprt_disconnect() over to xprt_force_disconnect() in order to enable the transport layer to manage the state of the XPRT_CONNECTED flag. Ditto in xs_tcp_read_fraghdr(). Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
2008-01-30SUNRPC: xprt_autoclose() should not call xprt_disconnect()Trond Myklebust
The transport layer should do that itself whenever appropriate. Note that the RDMA transport already assumes that it needs to call xprt_disconnect in xprt_rdma_close(). For TCP sockets, we want to call xprt_disconnect() only after the connection has been closed by both ends. Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
2008-01-30SUNRPC: Use shutdown() instead of close() when disconnecting a TCP socketTrond Myklebust
By using shutdown() rather than close() we allow the RPC client to wait for the TCP close handshake to complete before we start trying to reconnect using the same port. We use shutdown(SHUT_WR) only instead of shutting down both directions, however we wait until the server has closed the connection on its side. Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
2008-01-30SUNRPC: TCP clear XPRT_CLOSE_WAIT when the socket is closed for writesTrond Myklebust
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
2008-01-30SUNRPC: Allow the client to detect if the TCP connection is closedTrond Myklebust
Add an xprt->state bit to enable the TCP ->state_change() method to signal whether or not the TCP connection is in the process of closing down. This will to be used by the reconnection logic in a separate patch. Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
2008-01-30SUNRPC: Fix TCP rebinding logicTrond Myklebust
Currently the TCP rebinding logic assumes that if we're not using a reserved port, then we don't need to reconnect on the same port if a disconnection event occurs. This breaks most RPC duplicate reply cache implementations. Also take into account the fact that xprt_min_resvport and xprt_max_resvport may change while we're reconnecting, since the user may change them at any time via the sysctls. Ensure that we check the port boundaries every time we loop in xs_bind4/xs_bind6. Also ensure that if the boundaries change, we only scan the ports a maximum of 2 times. Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
2008-01-30SUNRPC: Fix a race in xs_tcp_state_change()Trond Myklebust
When scheduling the autoclose RPC call, we want to ensure that we don't race against the test_bit() call in xprt_clear_locked(). Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
2008-01-28[UDP]: Restore missing inDatagrams incrementsHerbert Xu
The previous move of the the UDP inDatagrams counter caused the counting of encapsulated packets, SUNRPC data (as opposed to call) packets and RXRPC packets to go missing. This patch restores all of these. Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au> Signed-off-by: David S. Miller <davem@davemloft.net>
2007-11-26SUNRPC: make sunrpc/xprtsock.c:xs_setup_{udp,tcp}() staticAdrian Bunk
xs_setup_{udp,tcp}() can now become static. Signed-off-by: Adrian Bunk <bunk@kernel.org> Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
2007-10-15Merge git://git.linux-nfs.org/pub/linux/nfs-2.6Linus Torvalds
* git://git.linux-nfs.org/pub/linux/nfs-2.6: (131 commits) NFSv4: Fix a typo in nfs_inode_reclaim_delegation NFS: Add a boot parameter to disable 64 bit inode numbers NFS: nfs_refresh_inode should clear cache_validity flags on success NFS: Fix a connectathon regression in NFSv3 and NFSv4 NFS: Use nfs_refresh_inode() in ops that aren't expected to change the inode SUNRPC: Don't call xprt_release in call refresh SUNRPC: Don't call xprt_release() if call_allocate fails SUNRPC: Fix buggy UDP transmission [23/37] Clean up duplicate includes in [2.6 patch] net/sunrpc/rpcb_clnt.c: make struct rpcb_program static SUNRPC: Use correct type in buffer length calculations SUNRPC: Fix default hostname created in rpc_create() nfs: add server port to rpc_pipe info file NFS: Get rid of some obsolete macros NFS: Simplify filehandle revalidation NFS: Ensure that nfs_link() returns a hashed dentry NFS: Be strict about dentry revalidation when doing exclusive create NFS: Don't zap the readdir caches upon error NFS: Remove the redundant nfs_reval_fsid() NFSv3: Always use directory post-op attributes in nfs3_proc_lookup ... Fix up trivial conflict due to sock_owned_by_user() cleanup manually in net/sunrpc/xprtsock.c
2007-10-10[NET] Cleanup: Use sock_owned_by_user() macroJohn Heffner
Changes asserts in sunrpc to use sock_owned_by_user() macro instead of referencing sock_lock.owner directly. Signed-off-by: John Heffner <jheffner@psc.edu> Signed-off-by: David S. Miller <davem@davemloft.net>
2007-10-09SUNRPC: Fix buggy UDP transmissionTrond Myklebust
xs_sendpages() may return a negative result. We sure as hell don't want to add that to the 'tk_bytes_sent' tally... Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
2007-10-09SUNRPC: Fix bytes-per-op accounting for RPC over UDPChuck Lever
NFS performance metrics reported zero bytes sent per op when mounting with UDP. The UDP socket transport wasn't properly counting the number of bytes sent. Signed-off-by: Chuck Lever <chuck.lever@oracle.com> Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
2007-10-09NFS/SUNRPC: support transport protocol naming\"Talpey, Thomas\
To prepare for including non-sockets-based RPC transports, select RPC transports by an identifier (to be used in following patches). Signed-off-by: Tom Talpey <tmt@netapp.com> Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
2007-10-09SUNRPC: rearrange RPC sockets definitions\"Talpey, Thomas\
To prepare for including non-sockets-based RPC transports, move the sockets-dependent definitions into their own file. Signed-off-by: Tom Talpey <tmt@netapp.com> Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
2007-10-09SUNRPC: rename the rpc_xprtsock_create structure\"Talpey, Thomas\
To prepare for including non-sockets-based RPC transports, change the overly suggestive name of the transport creation arguments struct. Signed-off-by: Tom Talpey <tmt@netapp.com> Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
2007-10-09SUNRPC: Finish API to load RPC transport implementations dynamically\"Talpey, Thomas\
Allow RPC client transport implementations to be loaded as needed, or as they become available from distributors or third-party vendors. Note that we leave the IP sockets implementation in sunrpc.o permanently, as IP functionality is always available in any kernel that runs NFS. Signed-off-by: Chuck Lever <chuck.lever@oracle.com> Signed-off-by: Tom Talpey <tmt@netapp.com> Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
2007-10-09SUNRPC: export per-transport rpcbind netid's\"Talpey, Thomas\
The rpcbind (v3+) netid is provided by each RPC client transport. This fixes an omission in IPv6 rpcbind client support, and enables future extension. Signed-off-by: Tom Talpey <tmt@netapp.com> Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
2007-10-09SUNRPC: Add support for formatted universal addressesChuck Lever
"Universal addresses" are a string representation of an IP address and port. They are described fully in RFC 3530, section 2.2. Add support for generating them in the RPC client's socket transport module. Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
2007-10-09SUNRPC: Split xs_reclassify_socket into an IPv4 and IPv6 versionChuck Lever
Signed-off-by: Chuck Lever <chuck.lever@oracle.com> Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
2007-10-09SUNRPC: Add a helper for extracting the address using the correct typeChuck Lever
Signed-off-by: Chuck Lever <chuck.lever@oracle.com> Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
2007-10-09SUNRPC: Add IPv6 address support to net/sunrpc/xprtsock.cChuck Lever
Finalize support for setting up RPC client transports to remote RPC services addressed via IPv6. Based on work done by Gilles Quillard at Bull Open Source. Signed-off-by: Chuck Lever <chuck.lever@oracle.com> Cc: Aurelien Charbon <aurelien.charbon@ext.bull.net> Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
2007-10-09SUNRPC: create connect workers for IPv6Chuck Lever
Clone separate connect worker functions for connecting AF_INET6 sockets. Signed-off-by: Chuck Lever <chuck.lever@oracle.com> Cc: Aurelien Charbon <aurelien.charbon@ext.bull.net> Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
2007-10-09SUNRPC: Rename IPv4 connect workersChuck Lever
Prepare for introduction of IPv6 versions of same. Signed-off-by: Chuck Lever <chuck.lever@oracle.com> Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
2007-10-09SUNRPC: Refactor a part of socket connect logic into a helper functionChuck Lever
Finishing a socket connect is the same for IPv4 and IPv6, so split it out into a helper. Signed-off-by: Chuck Lever <chuck.lever@oracle.com> Cc: Aurelien Charbon <aurelien.charbon@ext.bull.net> Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
2007-10-09SUNRPC: create an IPv6-savvy mechanism for binding to a reserved portChuck Lever
Clone xs_bindresvport into two functions, one that can handle IPv4 addresses, and one that can handle IPv6 addresses. Signed-off-by: Chuck Lever <chuck.lever@oracle.com> Cc: Aurelien Charbon <aurelien.charbon@ext.bull.net> Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
2007-10-09SUNRPC: Rename xs_bind() to prepare for IPv6-specific bind methodChuck Lever
Prepare for introduction of IPv6-specific socket bind function. Signed-off-by: Chuck Lever <chuck.lever@oracle.com> Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
2007-10-09SUNRPC: Introduce support for setting the port number in IPv6 addressesChuck Lever
We could clone xs_set_port, but this is easier overall. Signed-off-by: Chuck Lever <chuck.lever@oracle.com> Cc: Aurelien Charbon <aurelien.charbon@ext.bull.net> Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
2007-10-09SUNRPC: add a function to format IPv6 addressesChuck Lever
Clone xs_format_ipv4_peer_addresses into an IPv6 version. Signed-off-by: Chuck Lever <chuck.lever@oracle.com> Cc: Aurelien Charbon <aurelien.charbon@ext.bull.net> Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
2007-10-09SUNRPC: Rename xs_format_peer_addressesChuck Lever
Prepare to add an IPv6 version of xs_format_peer_addresses by renaming it to xs_format_ipv4_peer_addresses. Signed-off-by: Chuck Lever <chuck.lever@oracle.com> Cc: Aurelien Charbon <aurelien.charbon@ext.bull.net> Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
2007-10-09SUNRPC: Add hex-formatted address support to rpc_peeraddr2str()Chuck Lever
Add support for the NFS client's need to export volume information with IP addresses formatted in hex instead of decimal. This isn't used yet, but subsequent patches (not in this series) will change the NFS client to use this functionality. Signed-off-by: Chuck Lever <chuck.lever@oracle.com> Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
2007-10-09SUNRPC: Free address buffers in a loopChuck Lever
Use more generic logic to free buffers holding formatted addresses. This makes it less likely a bug will be introduced when adding additional buffer types in xs_format_peer_address(). Signed-off-by: Chuck Lever <chuck.lever@oracle.com> Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
2007-10-09SUNRPC: Use standard macros for printing IP addressesChuck Lever
include/linux/kernel.h gives us some nice macros for formatting IP addresses. Use them. Signed-off-by: Chuck Lever <chuck.lever@oracle.com> Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
2007-10-09SUNRPC: Fix a signed v. unsigned comparison in net/sunrpc/xprtsock.cChuck Lever
Signed-off-by: Chuck Lever <chuck.lever@oracle.com> Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
generated by cgit v1.2.3 (git 2.25.1) at 2024-06-05 09:31:46 +0000