1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
48
49
50
51
52
53
54
55
56
57
58
59
60
61
62
63
64
65
66
67
68
69
70
71
72
73
74
75
76
77
78
79
80
81
82
83
84
85
86
87
88
89
90
91
92
93
94
95
96
97
98
99
100
101
102
103
104
105
106
107
108
109
110
111
112
113
114
115
116
117
118
119
120
121
122
123
124
125
126
127
128
129
130
131
132
133
134
135
136
137
138
139
140
141
142
143
144
145
146
147
148
149
150
151
152
153
154
155
156
157
158
159
160
161
162
163
164
165
|
/*
* The setup file for serial related hardware on PMC-Sierra MSP processors.
*
* Copyright 2005 PMC-Sierra, Inc.
*
* This program is free software; you can redistribute it and/or modify it
* under the terms of the GNU General Public License as published by the
* Free Software Foundation; either version 2 of the License, or (at your
* option) any later version.
*
* THIS SOFTWARE IS PROVIDED ``AS IS'' AND ANY EXPRESS OR IMPLIED
* WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
* MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN
* NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT,
* INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
* NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF
* USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON
* ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
* (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF
* THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
*
* You should have received a copy of the GNU General Public License along
* with this program; if not, write to the Free Software Foundation, Inc.,
* 675 Mass Ave, Cambridge, MA 02139, USA.
*/
#include <linux/serial.h>
#include <linux/serial_core.h>
#include <linux/serial_reg.h>
#include <asm/bootinfo.h>
#include <asm/io.h>
#include <asm/processor.h>
#include <asm/serial.h>
#include <msp_prom.h>
#include <msp_int.h>
#include <msp_regs.h>
#ifdef CONFIG_KGDB
/*
* kgdb uses serial port 1 so the console can remain on port 0.
* To use port 0 change the definition to read as follows:
* #define DEBUG_PORT_BASE KSEG1ADDR(MSP_UART0_BASE)
*/
#define DEBUG_PORT_BASE KSEG1ADDR(MSP_UART1_BASE)
int putDebugChar(char c)
{
volatile uint32_t *uart = (volatile uint32_t *)DEBUG_PORT_BASE;
uint32_t val = (uint32_t)c;
local_irq_disable();
while( !(uart[5] & 0x20) ); /* Wait for TXRDY */
uart[0] = val;
while( !(uart[5] & 0x20) ); /* Wait for TXRDY */
local_irq_enable();
return 1;
}
char getDebugChar(void)
{
volatile uint32_t *uart = (volatile uint32_t *)DEBUG_PORT_BASE;
uint32_t val;
while( !(uart[5] & 0x01) ); /* Wait for RXRDY */
val = uart[0];
return (char)val;
}
void initDebugPort(unsigned int uartclk, unsigned int baudrate)
{
unsigned int baud_divisor = (uartclk + 8 * baudrate)/(16 * baudrate);
/* Enable FIFOs */
writeb(UART_FCR_ENABLE_FIFO | UART_FCR_CLEAR_RCVR |
UART_FCR_CLEAR_XMIT | UART_FCR_TRIGGER_4,
(char *)DEBUG_PORT_BASE + (UART_FCR * 4));
/* Select brtc divisor */
writeb(UART_LCR_DLAB, (char *)DEBUG_PORT_BASE + (UART_LCR * 4));
/* Store divisor lsb */
writeb(baud_divisor, (char *)DEBUG_PORT_BASE + (UART_TX * 4));
/* Store divisor msb */
writeb(baud_divisor >> 8, (char *)DEBUG_PORT_BASE + (UART_IER * 4));
/* Set 8N1 mode */
writeb(UART_LCR_WLEN8, (char *)DEBUG_PORT_BASE + (UART_LCR * 4));
/* Disable flow control */
writeb(0, (char *)DEBUG_PORT_BASE + (UART_MCR * 4));
/* Disable receive interrupt(!) */
writeb(0, (char *)DEBUG_PORT_BASE + (UART_IER * 4));
}
#endif
void __init msp_serial_setup(void)
{
char *s;
char *endp;
struct uart_port up;
unsigned int uartclk;
memset(&up, 0, sizeof(up));
/* Check if clock was specified in environment */
s = prom_getenv("uartfreqhz");
if(!(s && *s && (uartclk = simple_strtoul(s, &endp, 10)) && *endp == 0))
uartclk = MSP_BASE_BAUD;
ppfinit("UART clock set to %d\n", uartclk);
/* Initialize first serial port */
up.mapbase = MSP_UART0_BASE;
up.membase = ioremap_nocache(up.mapbase,MSP_UART_REG_LEN);
up.irq = MSP_INT_UART0;
up.uartclk = uartclk;
up.regshift = 2;
up.iotype = UPIO_DWAPB; /* UPIO_MEM like */
up.flags = STD_COM_FLAGS;
up.type = PORT_16550A;
up.line = 0;
up.private_data = (void*)UART0_STATUS_REG;
if (early_serial_setup(&up))
printk(KERN_ERR "Early serial init of port 0 failed\n");
/* Initialize the second serial port, if one exists */
switch (mips_machtype) {
case MACH_MSP4200_EVAL:
case MACH_MSP4200_GW:
case MACH_MSP4200_FPGA:
case MACH_MSP7120_EVAL:
case MACH_MSP7120_GW:
case MACH_MSP7120_FPGA:
/* Enable UART1 on MSP4200 and MSP7120 */
*GPIO_CFG2_REG = 0x00002299;
#ifdef CONFIG_KGDB
/* Initialize UART1 for kgdb since PMON doesn't */
if( DEBUG_PORT_BASE == KSEG1ADDR(MSP_UART1_BASE) ) {
if( mips_machtype == MACH_MSP4200_FPGA
|| mips_machtype == MACH_MSP7120_FPGA )
initDebugPort(uartclk,19200);
else
initDebugPort(uartclk,57600);
}
#endif
break;
default:
return; /* No second serial port, good-bye. */
}
up.mapbase = MSP_UART1_BASE;
up.membase = ioremap_nocache(up.mapbase,MSP_UART_REG_LEN);
up.irq = MSP_INT_UART1;
up.line = 1;
up.private_data = (void*)UART1_STATUS_REG;
if (early_serial_setup(&up))
printk(KERN_ERR "Early serial init of port 1 failed\n");
}
|