path: root/arch/x86/kernel/nmi_64.c

/*
 *  linux/arch/x86_64/nmi.c
 *
 *  NMI watchdog support on APIC systems
 *
 *  Started by Ingo Molnar <mingo@redhat.com>
 *
 *  Fixes:
 *  Mikael Pettersson	: AMD K7 support for local APIC NMI watchdog.
 *  Mikael Pettersson	: Power Management for local APIC NMI watchdog.
 *  Pavel Machek and
 *  Mikael Pettersson	: PM converted to driver model. Disable/enable API.
 */

#include <linux/nmi.h>
#include <linux/mm.h>
#include <linux/delay.h>
#include <linux/interrupt.h>
#include <linux/module.h>
#include <linux/sysdev.h>
#include <linux/sysctl.h>
#include <linux/kprobes.h>
#include <linux/cpumask.h>
#include <linux/kdebug.h>

#include <asm/smp.h>
#include <asm/nmi.h>
#include <asm/proto.h>
#include <asm/mce.h>

int unknown_nmi_panic;
int nmi_watchdog_enabled;
int panic_on_unrecovered_nmi;

static cpumask_t backtrace_mask = CPU_MASK_NONE;

/* nmi_active:
 * >0: the lapic NMI watchdog is active, but can be disabled
 * <0: the lapic NMI watchdog has not been set up, and cannot
 *     be enabled
 *  0: the lapic NMI watchdog is disabled, but can be enabled
 */
atomic_t nmi_active = ATOMIC_INIT(0);		/* oprofile uses this */
int panic_on_timeout;

unsigned int nmi_watchdog = NMI_DEFAULT;
static unsigned int nmi_hz = HZ;

static DEFINE_PER_CPU(short, wd_enabled);

/* local prototypes */
static int unknown_nmi_panic_callback(struct pt_regs *regs, int cpu);

/* Run after command line and cpu_init init, but before all other checks */
void nmi_watchdog_default(void)
{
	if (nmi_watchdog != NMI_DEFAULT)
		return;
	nmi_watchdog = NMI_NONE;
}

static int endflag __initdata = 0;

#ifdef CONFIG_SMP
/* The performance counters used by NMI_LOCAL_APIC don't trigger when
 * the CPU is idle. To make sure the NMI watchdog really ticks on all
 * CPUs during the test make them busy.
 */
static __init void nmi_cpu_busy(void *data)
{
	local_irq_enable_in_hardirq();
	/* Intentionally don't use cpu_relax here. This is
	   to make sure that the performance counter really ticks,
	   even if there is a simulator or similar that catches the
	   pause instruction. On a real HT machine this is fine because
	   all other CPUs are busy with "useless" delay loops and don't
	   care if they get somewhat less cycles. */
	while (endflag == 0)
		mb();
}
#endif

int __init check_nmi_watchdog (void)
{
	int *counts;
	int cpu;

	if ((nmi_watchdog == NMI_NONE) || (nmi_watchdog == NMI_DISABLED)) 
		return 0;

	if (!atomic_read(&nmi_active))
		return 0;

	counts = kmalloc(NR_CPUS * sizeof(int), GFP_KERNEL);
	if (!counts)
		return -1;

	printk(KERN_INFO "testing NMI watchdog ... ");

#ifdef CONFIG_SMP
	if (nmi_watchdog == NMI_LOCAL_APIC)
		smp_call_function(nmi_cpu_busy, (void *)&endflag, 0, 0);
#endif

	for (cpu = 0; cpu < NR_CPUS; cpu++)
		counts[cpu] = cpu_pda(cpu)->__nmi_count;
	local_irq_enable();
	mdelay((20*1000)/nmi_hz); // wait 20 ticks

	for_each_online_cpu(cpu) {
		if (!per_cpu(wd_enabled, cpu))
			continue;
		if (cpu_pda(cpu)->__nmi_count - counts[cpu] <= 5) {
			printk("CPU#%d: NMI appears to be stuck (%d->%d)!\n",
			       cpu,
			       counts[cpu],
			       cpu_pda(cpu)->__nmi_count);
			per_cpu(wd_enabled, cpu) = 0;
			atomic_dec(&nmi_active);
		}
	}
	if (!atomic_read(&nmi_active)) {
		kfree(counts);
		atomic_set(&nmi_active, -1);
		endflag = 1;
		return -1;
	}
	endflag = 1;
	printk("OK.\n");

	/* now that we know it works we can reduce NMI frequency to
	   something more reasonable; makes a difference in some configs */
	if (nmi_watchdog == NMI_LOCAL_APIC)
		nmi_hz = lapic_adjust_nmi_hz(1);

	kfree(counts);
	return 0;
}

int __init setup_nmi_watchdog(char *str)
{
	int nmi;

	if (!strncmp(str,"panic",5)) {
		panic_on_timeout = 1;
		str = strchr(str, ',');
		if (!str)
			return 1;
		++str;
	}

	get_option(&str, &nmi);

	if ((nmi >= NMI_INVALID) || (nmi < NMI_NONE))
		return 0;

	nmi_watchdog = nmi;
	return 1;
}

__setup("nmi_watchdog=", setup_nmi_watchdog);


static void __acpi_nmi_disable(void *__unused)
{
	apic_write(APIC_LVT0, APIC_DM_NMI | APIC_LVT_MASKED);
}

/*
 * Disable timer based NMIs on all CPUs:
 */
void acpi_nmi_disable(void)
{
	if (atomic_read(&nmi_active) && nmi_watchdog == NMI_IO_APIC)
		on_each_cpu(__acpi_nmi_disable, NULL, 0, 1);
}

static void __acpi_nmi_enable(void *__unused)
{
	apic_write(APIC_LVT0, APIC_DM_NMI);
}

/*
 * Enable timer based NMIs on all CPUs:
 */
void acpi_nmi_enable(void)
{
	if (atomic_read(&nmi_active) && nmi_watchdog == NMI_IO_APIC)
		on_each_cpu(__acpi_nmi_enable, NULL, 0, 1);
}
#ifdef CONFIG_PM

static int nmi_pm_active; /* nmi_active before suspend */

static int lapic_nmi_suspend(struct sys_device *dev, pm_message_t state)
{
	/* only CPU0 goes here, other CPUs should be offline */
	nmi_pm_active = atomic_read(&nmi_active);
	stop_apic_nmi_watchdog(NULL);
	BUG_ON(atomic_read(&nmi_active) != 0);
	return 0;
}

static int lapic_nmi_resume(struct sys_device *dev)
{
	/* only CPU0 goes here, other CPUs should be offline */
	if (nmi_pm_active > 0) {
		setup_apic_nmi_watchdog(NULL);
		touch_nmi_watchdog();
	}
	return 0;
}

static struct sysdev_class nmi_sysclass = {
	set_kset_name("lapic_nmi"),
	.resume		= lapic_nmi_resume,
	.suspend	= lapic_nmi_suspend,
};

static struct sys_device device_lapic_nmi = {
	.id		= 0,
	.cls	= &nmi_sysclass,
};

static int __init init_lapic_nmi_sysfs(void)
{
	int error;

	/* should really be a BUG_ON but b/c this is an
	 * init call, it just doesn't work.  -dcz
	 */
	if (nmi_watchdog != NMI_LOCAL_APIC)
		return 0;

	if ( atomic_read(&nmi_active) < 0 )
		return 0;

	error = sysdev_class_register(&nmi_sysclass);
	if (!error)
		error = sysdev_register(&device_lapic_nmi);
	return error;
}
/* must come after the local APIC's device_initcall() */
late_initcall(init_lapic_nmi_sysfs);

#endif	/* CONFIG_PM */

void setup_apic_nmi_watchdog(void *unused)
{
	if (__get_cpu_var(wd_enabled) == 1)
		return;

	/* cheap hack to support suspend/resume */
	/* if cpu0 is not active neither should the other cpus */
	if ((smp_processor_id() != 0) && (atomic_read(&nmi_active) <= 0))
		return;

	switch (nmi_watchdog) {
	case NMI_LOCAL_APIC:
		__get_cpu_var(wd_enabled) = 1;
		if (lapic_watchdog_init(nmi_hz) < 0) {
			__get_cpu_var(wd_enabled) = 0;
			return;
		}
		/* FALL THROUGH */
	case NMI_IO_APIC:
		__get_cpu_var(wd_enabled) = 1;
		atomic_inc(&nmi_active);
	}
}

void stop_apic_nmi_watchdog(void *unused)
{
	/* only support LOCAL and IO APICs for now */
	if ((nmi_watchdog != NMI_LOCAL_APIC) &&
	    (nmi_watchdog != NMI_IO_APIC))
	    	return;
	if (__get_cpu_var(wd_enabled) == 0)
		return;
	if (nmi_watchdog == NMI_LOCAL_APIC)
		lapic_watchdog_stop();
	__get_cpu_var(wd_enabled) = 0;
	atomic_dec(&nmi_active);
}

/*
 * the best way to detect whether a CPU has a 'hard lockup' problem
 * is to check it's local APIC timer IRQ counts. If they are not
 * changing then that CPU has some problem.
 *
 * as these watchdog NMI IRQs are generated on every CPU, we only
 * have to check the current processor.
 */

static DEFINE_PER_CPU(unsigned, last_irq_sum);
static DEFINE_PER_CPU(local_t, alert_counter);
static DEFINE_PER_CPU(int, nmi_touch);

void touch_nmi_watchdog(void)
{
	if (nmi_watchdog > 0) {
		unsigned cpu;

		/*
 		 * Tell other CPUs to reset their alert counters. We cannot
		 * do it ourselves because the alert count increase is not
		 * atomic.
		 */
		for_each_present_cpu(cpu) {
			if (per_cpu(nmi_touch, cpu) != 1)
				per_cpu(nmi_touch, cpu) = 1;
		}
	}

 	touch_softlockup_watchdog();
}

int __kprobes nmi_watchdog_tick(struct pt_regs * regs, unsigned reason)
{
	int sum;
	int touched = 0;
	int cpu = smp_processor_id();
	int rc = 0;

	/* check for other users first */
	if (notify_die(DIE_NMI, "nmi", regs, reason, 2, SIGINT)
			== NOTIFY_STOP) {
		rc = 1;
		touched = 1;
	}

	sum = read_pda(apic_timer_irqs);
	if (__get_cpu_var(nmi_touch)) {
		__get_cpu_var(nmi_touch) = 0;
		touched = 1;
	}

	if (cpu_isset(cpu, backtrace_mask)) {
		static DEFINE_SPINLOCK(lock);	/* Serialise the printks */

		spin_lock(&lock);
		printk("NMI backtrace for cpu %d\n", cpu);
		dump_stack();
		spin_unlock(&lock);
		cpu_clear(cpu, backtrace_mask);
	}

#ifdef CONFIG_X86_MCE
	/* Could check oops_in_progress here too, but it's safer
	   not too */
	if (atomic_read(&mce_entry) > 0)
		touched = 1;
#endif
	/* if the apic timer isn't firing, this cpu isn't doing much */
	if (!touched && __get_cpu_var(last_irq_sum) == sum) {
		/*
		 * Ayiee, looks like this CPU is stuck ...
		 * wait a few IRQs (5 seconds) before doing the oops ...
		 */
		local_inc(&__get_cpu_var(alert_counter));
		if (local_read(&__get_cpu_var(alert_counter)) == 5*nmi_hz)
			die_nmi("NMI Watchdog detected LOCKUP on CPU %d\n", regs,
				panic_on_timeout);
	} else {
		__get_cpu_var(last_irq_sum) = sum;
		local_set(&__get_cpu_var(alert_counter), 0);
	}

	/* see if the nmi watchdog went off */
	if (!__get_cpu_var(wd_enabled))
		return rc;
	switch (nmi_watchdog) {
	case NMI_LOCAL_APIC:
		rc |= lapic_wd_event(nmi_hz);
		break;
	case NMI_IO_APIC:
		/* don't know how to accurately check for this.
		 * just assume it was a watchdog timer interrupt
		 * This matches the old behaviour.
		 */
		rc = 1;
		break;
	}
	return rc;
}

static unsigned ignore_nmis;

asmlinkage __kprobes void do_nmi(struct pt_regs * regs, long error_code)
{
	nmi_enter();
	add_pda(__nmi_count,1);
	if (!ignore_nmis)
		default_do_nmi(regs);
	nmi_exit();
}

int do_nmi_callback(struct pt_regs * regs, int cpu)
{
#ifdef CONFIG_SYSCTL
	if (unknown_nmi_panic)
		return unknown_nmi_panic_callback(regs, cpu);
#endif
	return 0;
}

void stop_nmi(void)
{
	acpi_nmi_disable();
	ignore_nmis++;
}

void restart_nmi(void)
{
	ignore_nmis--;
	acpi_nmi_enable();
}

#ifdef CONFIG_SYSCTL

static int unknown_nmi_panic_callback(struct pt_regs *regs, int cpu)
{
	unsigned char reason = get_nmi_reason();
	char buf[64];

	sprintf(buf, "NMI received for unknown reason %02x\n", reason);
	die_nmi(buf, regs, 1);	/* Always panic here */
	return 0;
}

/*
 * proc handler for /proc/sys/kernel/nmi
 */
int proc_nmi_enabled(struct ctl_table *table, int write, struct file *file,
			void __user *buffer, size_t *length, loff_t *ppos)
{
	int old_state;

	nmi_watchdog_enabled = (atomic_read(&nmi_active) > 0) ? 1 : 0;
	old_state = nmi_watchdog_enabled;
	proc_dointvec(table, write, file, buffer, length, ppos);
	if (!!old_state == !!nmi_watchdog_enabled)
		return 0;

	if (atomic_read(&nmi_active) < 0 || nmi_watchdog == NMI_DISABLED) {
		printk( KERN_WARNING "NMI watchdog is permanently disabled\n");
		return -EIO;
	}

	/* if nmi_watchdog is not set yet, then set it */
	nmi_watchdog_default();

	if (nmi_watchdog == NMI_LOCAL_APIC) {
		if (nmi_watchdog_enabled)
			enable_lapic_nmi_watchdog();
		else
			disable_lapic_nmi_watchdog();
	} else {
		printk( KERN_WARNING
			"NMI watchdog doesn't know what hardware to touch\n");
		return -EIO;
	}
	return 0;
}

#endif

void __trigger_all_cpu_backtrace(void)
{
	int i;

	backtrace_mask = cpu_online_map;
	/* Wait for up to 10 seconds for all CPUs to do the backtrace */
	for (i = 0; i < 10 * 1000; i++) {
		if (cpus_empty(backtrace_mask))
			break;
		mdelay(1);
	}
}

EXPORT_SYMBOL(nmi_active);
EXPORT_SYMBOL(nmi_watchdog);
EXPORT_SYMBOL(touch_nmi_watchdog);