path: root/src/mesa/pipe/nv30/nv30_shader.h

#ifndef __NV30_SHADER_H__
#define __NV30_SHADER_H__

/* Vertex programs instruction set
 *
 * 128bit opcodes, split into 4 32-bit ones for ease of use.
 *
 * Non-native instructions
 *   ABS - MOV + NV40_VP_INST0_DEST_ABS
 *   POW - EX2 + MUL + LG2
 *   SUB - ADD, second source negated
 *   SWZ - MOV
 *   XPD -  
 *
 * Register access
 *   - Only one INPUT can be accessed per-instruction (move extras into TEMPs)
 *   - Only one CONST can be accessed per-instruction (move extras into TEMPs)
 *
 * Relative Addressing
 *   According to the value returned for
 *   MAX_PROGRAM_NATIVE_ADDRESS_REGISTERS_ARB
 *
 *   there are only two address registers available.  The destination in the
 *   ARL instruction is set to TEMP <n> (The temp isn't actually written).
 *
 *   When using vanilla ARB_v_p, the proprietary driver will squish both the
 *   available ADDRESS regs into the first hardware reg in the X and Y
 *   components.
 *
 *   To use an address reg as an index into consts, the CONST_SRC is set to
 *   (const_base + offset) and INDEX_CONST is set.
 *
 *   To access the second address reg use ADDR_REG_SELECT_1. A particular
 *   component of the address regs is selected with ADDR_SWZ.
 *
 *   Only one address register can be accessed per instruction.
 *
 * Conditional execution (see NV_vertex_program{2,3} for details) Conditional
 * execution of an instruction is enabled by setting COND_TEST_ENABLE, and
 * selecting the condition which will allow the test to pass with
 * COND_{FL,LT,...}.  It is possible to swizzle the values in the condition
 * register, which allows for testing against an individual component.
 *
 * Branching:
 *
 *   The BRA/CAL instructions seem to follow a slightly different opcode
 *   layout.  The destination instruction ID (IADDR) overlaps a source field.
 *   Instruction ID's seem to be numbered based on the UPLOAD_FROM_ID FIFO
 *   command, and is incremented automatically on each UPLOAD_INST FIFO
 *   command.
 *
 *   Conditional branching is achieved by using the condition tests described
 *   above.  There doesn't appear to be dedicated looping instructions, but
 *   this can be done using a temp reg + conditional branching.
 *
 *   Subroutines may be uploaded before the main program itself, but the first
 *   executed instruction is determined by the PROGRAM_START_ID FIFO command.
 *
 */

/* DWORD 0 */

#define NV30_VP_INST_ADDR_REG_SELECT_1        (1 << 24)
#define NV30_VP_INST_SRC2_ABS           (1 << 23) /* guess */
#define NV30_VP_INST_SRC1_ABS           (1 << 22) /* guess */
#define NV30_VP_INST_SRC0_ABS           (1 << 21) /* guess */
#define NV30_VP_INST_VEC_RESULT         (1 << 20)
#define NV30_VP_INST_DEST_TEMP_ID_SHIFT        16
#define NV30_VP_INST_DEST_TEMP_ID_MASK        (0x0F << 16)
#define NV30_VP_INST_COND_UPDATE_ENABLE        (1<<15)
#define NV30_VP_INST_VEC_DEST_TEMP_MASK      (0xF << 16)
#define NV30_VP_INST_COND_TEST_ENABLE        (1<<14)
#define NV30_VP_INST_COND_SHIFT          11
#define NV30_VP_INST_COND_MASK          (0x07 << 11)
#  define NV30_VP_INST_COND_FL  0 /* guess */  
#  define NV30_VP_INST_COND_LT  1  
#  define NV30_VP_INST_COND_EQ  2
#  define NV30_VP_INST_COND_LE  3
#  define NV30_VP_INST_COND_GT  4
#  define NV30_VP_INST_COND_NE  5
#  define NV30_VP_INST_COND_GE  6
#  define NV30_VP_INST_COND_TR  7 /* guess */
#define NV30_VP_INST_COND_SWZ_X_SHIFT        9
#define NV30_VP_INST_COND_SWZ_X_MASK        (0x03 <<  9)
#define NV30_VP_INST_COND_SWZ_Y_SHIFT        7
#define NV30_VP_INST_COND_SWZ_Y_MASK        (0x03 <<  7)
#define NV30_VP_INST_COND_SWZ_Z_SHIFT        5
#define NV30_VP_INST_COND_SWZ_Z_MASK        (0x03 <<  5)
#define NV30_VP_INST_COND_SWZ_W_SHIFT        3
#define NV30_VP_INST_COND_SWZ_W_MASK        (0x03 <<  3)
#define NV30_VP_INST_COND_SWZ_ALL_SHIFT        3
#define NV30_VP_INST_COND_SWZ_ALL_MASK        (0xFF <<  3)
#define NV30_VP_INST_ADDR_SWZ_SHIFT        1
#define NV30_VP_INST_ADDR_SWZ_MASK        (0x03 <<  1)
#define NV30_VP_INST_SCA_OPCODEH_SHIFT        0
#define NV30_VP_INST_SCA_OPCODEH_MASK        (0x01 <<  0)

/* DWORD 1 */
#define NV30_VP_INST_SCA_OPCODEL_SHIFT        28
#define NV30_VP_INST_SCA_OPCODEL_MASK        (0x0F << 28)
#  define NV30_VP_INST_OP_NOP  0x00
#  define NV30_VP_INST_OP_RCP  0x02
#  define NV30_VP_INST_OP_RCC  0x03
#  define NV30_VP_INST_OP_RSQ  0x04
#  define NV30_VP_INST_OP_EXP  0x05
#  define NV30_VP_INST_OP_LOG  0x06
#  define NV30_VP_INST_OP_LIT  0x07
#  define NV30_VP_INST_OP_BRA  0x09
#  define NV30_VP_INST_OP_CAL  0x0B
#  define NV30_VP_INST_OP_RET  0x0C
#  define NV30_VP_INST_OP_LG2  0x0D
#  define NV30_VP_INST_OP_EX2  0x0E
#  define NV30_VP_INST_OP_SIN  0x0F
#  define NV30_VP_INST_OP_COS  0x10
#define NV30_VP_INST_VEC_OPCODE_SHIFT        23
#define NV30_VP_INST_VEC_OPCODE_MASK        (0x1F << 23)
#  define NV30_VP_INST_OP_NOPV  0x00
#  define NV30_VP_INST_OP_MOV  0x01
#  define NV30_VP_INST_OP_MUL  0x02
#  define NV30_VP_INST_OP_ADD  0x03
#  define NV30_VP_INST_OP_MAD  0x04
#  define NV30_VP_INST_OP_DP3  0x05
#  define NV30_VP_INST_OP_DP4  0x07
#  define NV30_VP_INST_OP_DPH  0x06
#  define NV30_VP_INST_OP_DST  0x08
#  define NV30_VP_INST_OP_MIN  0x09
#  define NV30_VP_INST_OP_MAX  0x0A
#  define NV30_VP_INST_OP_SLT  0x0B
#  define NV30_VP_INST_OP_SGE  0x0C
#  define NV30_VP_INST_OP_ARL  0x0D
#  define NV30_VP_INST_OP_FRC  0x0E
#  define NV30_VP_INST_OP_FLR  0x0F
#  define NV30_VP_INST_OP_SEQ  0x10
#  define NV30_VP_INST_OP_SFL  0x11
#  define NV30_VP_INST_OP_SGT  0x12
#  define NV30_VP_INST_OP_SLE  0x13
#  define NV30_VP_INST_OP_SNE  0x14
#  define NV30_VP_INST_OP_STR  0x15
#  define NV30_VP_INST_OP_SSG  0x16
#  define NV30_VP_INST_OP_ARR  0x17
#  define NV30_VP_INST_OP_ARA  0x18
#define NV30_VP_INST_CONST_SRC_SHIFT        14
#define NV30_VP_INST_CONST_SRC_MASK        (0xFF << 14)
#define NV30_VP_INST_INPUT_SRC_SHIFT        9    /*NV20*/
#define NV30_VP_INST_INPUT_SRC_MASK        (0x0F <<  9)  /*NV20*/
#  define NV30_VP_INST_IN_POS  0    /* These seem to match the bindings specified in */
#  define NV30_VP_INST_IN_WEIGHT  1    /* the ARB_v_p spec (2.14.3.1) */
#  define NV30_VP_INST_IN_NORMAL  2    
#  define NV30_VP_INST_IN_COL0  3    /* Should probably confirm them all though */
#  define NV30_VP_INST_IN_COL1  4
#  define NV30_VP_INST_IN_FOGC  5
#  define NV30_VP_INST_IN_TC0  8
#  define NV30_VP_INST_IN_TC(n)  (8+n)
#define NV30_VP_INST_SRC0H_SHIFT        0    /*NV20*/
#define NV30_VP_INST_SRC0H_MASK          (0x1FF << 0)  /*NV20*/

/* Please note: the IADDR fields overlap other fields because they are used
 * only for branch instructions.  See Branching: label above
 *
 * DWORD 2
 */
#define NV30_VP_INST_SRC0L_SHIFT        26    /*NV20*/
#define NV30_VP_INST_SRC0L_MASK         (0x3F  <<26)  /* NV30_VP_SRC0_LOW_MASK << 26 */
#define NV30_VP_INST_SRC1_SHIFT         11    /*NV20*/
#define NV30_VP_INST_SRC1_MASK          (0x7FFF<<11)  /*NV20*/
#define NV30_VP_INST_SRC2H_SHIFT        0    /*NV20*/
#define NV30_VP_INST_SRC2H_MASK          (0x7FF << 0)  /* NV30_VP_SRC2_HIGH_MASK >> 4*/
#define NV30_VP_INST_IADDR_SHIFT        2
#define NV30_VP_INST_IADDR_MASK          (0xF <<  28)   /* NV30_VP_SRC2_LOW_MASK << 28 */

/* DWORD 3 */
#define NV30_VP_INST_SRC2L_SHIFT        28    /*NV20*/
#define NV30_VP_INST_SRC2L_MASK          (0x0F  <<28)  /*NV20*/
#define NV30_VP_INST_STEMP_WRITEMASK_SHIFT      24
#define NV30_VP_INST_STEMP_WRITEMASK_MASK      (0x0F << 24)
#define NV30_VP_INST_VTEMP_WRITEMASK_SHIFT      20
#define NV30_VP_INST_VTEMP_WRITEMASK_MASK      (0x0F << 20)
#define NV30_VP_INST_SDEST_WRITEMASK_SHIFT      16
#define NV30_VP_INST_SDEST_WRITEMASK_MASK      (0x0F << 16)
#define NV30_VP_INST_VDEST_WRITEMASK_SHIFT      12    /*NV20*/
#define NV30_VP_INST_VDEST_WRITEMASK_MASK      (0x0F << 12)  /*NV20*/
#define NV30_VP_INST_DEST_SHIFT        2
#define NV30_VP_INST_DEST_MASK        (0x0F <<  2)
#  define NV30_VP_INST_DEST_POS  0
#  define NV30_VP_INST_DEST_BFC0  1
#  define NV30_VP_INST_DEST_BFC1  2
#  define NV30_VP_INST_DEST_COL0  3
#  define NV30_VP_INST_DEST_COL1  4
#  define NV30_VP_INST_DEST_FOGC  5
#  define NV30_VP_INST_DEST_PSZ   6
#  define NV30_VP_INST_DEST_TC(n)  (8+n)

#define NV30_VP_INST_LAST                           (1 << 0)

/* Useful to split the source selection regs into their pieces */
#define NV30_VP_SRC0_HIGH_SHIFT                                                6
#define NV30_VP_SRC0_HIGH_MASK                                        0x00007FC0
#define NV30_VP_SRC0_LOW_MASK                                         0x0000003F
#define NV30_VP_SRC2_HIGH_SHIFT                                                4
#define NV30_VP_SRC2_HIGH_MASK                                        0x00007FF0
#define NV30_VP_SRC2_LOW_MASK                                         0x0000000F


/* Source-register definition - matches NV20 exactly */
#define NV30_VP_SRC_NEGATE          (1<<14)
#define NV30_VP_SRC_SWZ_X_SHIFT        12
#define NV30_VP_SRC_REG_SWZ_X_MASK        (0x03  <<12)
#define NV30_VP_SRC_SWZ_Y_SHIFT        10
#define NV30_VP_SRC_REG_SWZ_Y_MASK        (0x03  <<10)
#define NV30_VP_SRC_SWZ_Z_SHIFT        8
#define NV30_VP_SRC_REG_SWZ_Z_MASK        (0x03  << 8)
#define NV30_VP_SRC_SWZ_W_SHIFT        6
#define NV30_VP_SRC_REG_SWZ_W_MASK        (0x03  << 6)
#define NV30_VP_SRC_REG_SWZ_ALL_SHIFT        6
#define NV30_VP_SRC_REG_SWZ_ALL_MASK        (0xFF  << 6)
#define NV30_VP_SRC_TEMP_SRC_SHIFT        2
#define NV30_VP_SRC_REG_TEMP_ID_MASK        (0x0F  << 0)
#define NV30_VP_SRC_REG_TYPE_SHIFT        0
#define NV30_VP_SRC_REG_TYPE_MASK        (0x03  << 0)
#define NV30_VP_SRC_REG_TYPE_TEMP  1
#define NV30_VP_SRC_REG_TYPE_INPUT  2
#define NV30_VP_SRC_REG_TYPE_CONST  3 /* guess */

/*
 * Each fragment program opcode appears to be comprised of 4 32-bit values.
 *
 *   0 - Opcode, output reg/mask, ATTRIB source
 *   1 - Source 0
 *   2 - Source 1
 *   3 - Source 2
 *
 * There appears to be no special difference between result regs and temp regs.
 *     result.color == R0.xyzw
 *     result.depth == R1.z
 * When the fragprog contains instructions to write depth, NV30_TCL_PRIMITIVE_3D_UNK1D78=0
 * otherwise it is set to 1.
 *
 * Constants are inserted directly after the instruction that uses them.
 * 
 * It appears that it's not possible to use two input registers in one
 * instruction as the input sourcing is done in the instruction dword
 * and not the source selection dwords.  As such instructions such as:
 * 
 *     ADD result.color, fragment.color, fragment.texcoord[0];
 *
 * must be split into two MOV's and then an ADD (nvidia does this) but
 * I'm not sure why it's not just one MOV and then source the second input
 * in the ADD instruction..
 *
 * Negation of the full source is done with NV30_FP_REG_NEGATE, arbitrary
 * negation requires multiplication with a const.
 *
 * Arbitrary swizzling is supported with the exception of SWIZZLE_ZERO/SWIZZLE_ONE
 * The temp/result regs appear to be initialised to (0.0, 0.0, 0.0, 0.0) as SWIZZLE_ZERO
 * is implemented simply by not writing to the relevant components of the destination.
 *
 * Conditional execution
 *   TODO
 * 
 * Non-native instructions:
 *   LIT
 *   LRP - MAD+MAD
 *   SUB - ADD, negate second source
 *   RSQ - LG2 + EX2
 *   POW - LG2 + MUL + EX2
 *   SCS - COS + SIN
 *   XPD
 */

//== Opcode / Destination selection ==
#define NV30_FP_OP_PROGRAM_END          (1 << 0)
#define NV30_FP_OP_OUT_REG_SHIFT        1
#define NV30_FP_OP_OUT_REG_MASK          (31 << 1)  /* uncertain */
/* Needs to be set when writing outputs to get expected result.. */
#define NV30_FP_OP_OUT_REG_HALF          (1 << 7)
#define NV30_FP_OP_COND_WRITE_ENABLE        (1 << 8)
#define NV30_FP_OP_OUTMASK_SHIFT        9
#define NV30_FP_OP_OUTMASK_MASK          (0xF << 9)
#  define NV30_FP_OP_OUT_X  (1<<9)
#  define NV30_FP_OP_OUT_Y  (1<<10)
#  define NV30_FP_OP_OUT_Z  (1<<11)
#  define NV30_FP_OP_OUT_W  (1<<12)
/* Uncertain about these, especially the input_src values.. it's possible that
 * they can be dynamically changed.
 */
#define NV30_FP_OP_INPUT_SRC_SHIFT        13
#define NV30_FP_OP_INPUT_SRC_MASK        (15 << 13)
#  define NV30_FP_OP_INPUT_SRC_POSITION  0x0
#  define NV30_FP_OP_INPUT_SRC_COL0  0x1
#  define NV30_FP_OP_INPUT_SRC_COL1  0x2
#  define NV30_FP_OP_INPUT_SRC_FOGC  0x3
#  define NV30_FP_OP_INPUT_SRC_TC0    0x4
#  define NV30_FP_OP_INPUT_SRC_TC(n)  (0x4 + n)
#define NV30_FP_OP_TEX_UNIT_SHIFT        17
#define NV30_FP_OP_TEX_UNIT_MASK        (0xF << 17) /* guess */
#define NV30_FP_OP_PRECISION_SHIFT        22
#define NV30_FP_OP_PRECISION_MASK        (3 << 22)
#   define NV30_FP_PRECISION_FP32  0
#   define NV30_FP_PRECISION_FP16  1
#   define NV30_FP_PRECISION_FX12  2
#define NV30_FP_OP_OPCODE_SHIFT          24
#define NV30_FP_OP_OPCODE_MASK          (0x3F << 24)
#  define NV30_FP_OP_OPCODE_NOP  0x00
#  define NV30_FP_OP_OPCODE_MOV  0x01
#  define NV30_FP_OP_OPCODE_MUL  0x02
#  define NV30_FP_OP_OPCODE_ADD  0x03
#  define NV30_FP_OP_OPCODE_MAD  0x04
#  define NV30_FP_OP_OPCODE_DP3  0x05
#  define NV30_FP_OP_OPCODE_DP4  0x06
#  define NV30_FP_OP_OPCODE_DST  0x07
#  define NV30_FP_OP_OPCODE_MIN  0x08
#  define NV30_FP_OP_OPCODE_MAX  0x09
#  define NV30_FP_OP_OPCODE_SLT  0x0A
#  define NV30_FP_OP_OPCODE_SGE  0x0B
#  define NV30_FP_OP_OPCODE_SLE  0x0C
#  define NV30_FP_OP_OPCODE_SGT  0x0D
#  define NV30_FP_OP_OPCODE_SNE  0x0E
#  define NV30_FP_OP_OPCODE_SEQ  0x0F
#  define NV30_FP_OP_OPCODE_FRC  0x10
#  define NV30_FP_OP_OPCODE_FLR  0x11
#  define NV30_FP_OP_OPCODE_KIL  0x12
#  define NV30_FP_OP_OPCODE_PK4B   0x13
#  define NV30_FP_OP_OPCODE_UP4B   0x14
#  define NV30_FP_OP_OPCODE_DDX  0x15 /* can only write XY */
#  define NV30_FP_OP_OPCODE_DDY  0x16 /* can only write XY */
#  define NV30_FP_OP_OPCODE_TEX  0x17
#  define NV30_FP_OP_OPCODE_TXP  0x18
#  define NV30_FP_OP_OPCODE_TXD  0x19
#  define NV30_FP_OP_OPCODE_RCP  0x1A
#  define NV30_FP_OP_OPCODE_RSQ  0x1B
#  define NV30_FP_OP_OPCODE_EX2  0x1C
#  define NV30_FP_OP_OPCODE_LG2  0x1D
#  define NV30_FP_OP_OPCODE_LIT  0x1E
#  define NV30_FP_OP_OPCODE_LRP  0x1F
#  define NV30_FP_OP_OPCODE_STR  0x20 
#  define NV30_FP_OP_OPCODE_SFL  0x21
#  define NV30_FP_OP_OPCODE_COS  0x22
#  define NV30_FP_OP_OPCODE_SIN  0x23
#  define NV30_FP_OP_OPCODE_PK2H   0x24
#  define NV30_FP_OP_OPCODE_UP2H   0x25
#  define NV30_FP_OP_OPCODE_POW  0x26
#  define NV30_FP_OP_OPCODE_PK4UB  0x27
#  define NV30_FP_OP_OPCODE_UP4UB  0x28
#  define NV30_FP_OP_OPCODE_PK2US  0x29
#  define NV30_FP_OP_OPCODE_UP2US  0x2A
#  define NV30_FP_OP_OPCODE_DP2A   0x2E
#  define NV30_FP_OP_OPCODE_TXB  0x31
#  define NV30_FP_OP_OPCODE_RFL  0x36
#  define NV30_FP_OP_OPCODE_DIV  0x3A
#define NV30_FP_OP_OUT_SAT          (1 << 31)

/* high order bits of SRC0 */
#define NV30_FP_OP_OUT_ABS          (1 << 29)
#define NV30_FP_OP_COND_SWZ_W_SHIFT        27
#define NV30_FP_OP_COND_SWZ_W_MASK        (3 << 27)
#define NV30_FP_OP_COND_SWZ_Z_SHIFT        25
#define NV30_FP_OP_COND_SWZ_Z_MASK        (3 << 25)
#define NV30_FP_OP_COND_SWZ_Y_SHIFT        23
#define NV30_FP_OP_COND_SWZ_Y_MASK        (3 << 23)
#define NV30_FP_OP_COND_SWZ_X_SHIFT        21
#define NV30_FP_OP_COND_SWZ_X_MASK        (3 << 21)
#define NV30_FP_OP_COND_SWZ_ALL_SHIFT        21
#define NV30_FP_OP_COND_SWZ_ALL_MASK        (0xFF << 21)
#define NV30_FP_OP_COND_SHIFT          18
#define NV30_FP_OP_COND_MASK          (0x07 << 18)
#  define NV30_FP_OP_COND_FL  0
#  define NV30_FP_OP_COND_LT  1
#  define NV30_FP_OP_COND_EQ  2
#  define NV30_FP_OP_COND_LE  3
#  define NV30_FP_OP_COND_GT  4
#  define NV30_FP_OP_COND_NE  5
#  define NV30_FP_OP_COND_GE  6
#  define NV30_FP_OP_COND_TR  7

/* high order bits of SRC1 */
#define NV30_FP_OP_DST_SCALE_SHIFT        28
#define NV30_FP_OP_DST_SCALE_MASK        (3 << 28)
#define NV30_FP_OP_DST_SCALE_1X                                                0
#define NV30_FP_OP_DST_SCALE_2X                                                1
#define NV30_FP_OP_DST_SCALE_4X                                                2
#define NV30_FP_OP_DST_SCALE_8X                                                3
#define NV30_FP_OP_DST_SCALE_INV_2X                                            5
#define NV30_FP_OP_DST_SCALE_INV_4X                                            6
#define NV30_FP_OP_DST_SCALE_INV_8X                                            7


/* high order bits of SRC2 */
#define NV30_FP_OP_INDEX_INPUT          (1 << 30)

//== Register selection ==
#define NV30_FP_REG_TYPE_SHIFT          0
#define NV30_FP_REG_TYPE_MASK          (3 << 0)
#  define NV30_FP_REG_TYPE_TEMP  0
#  define NV30_FP_REG_TYPE_INPUT  1
#  define NV30_FP_REG_TYPE_CONST  2
#define NV30_FP_REG_SRC_SHIFT          2 /* uncertain */
#define NV30_FP_REG_SRC_MASK          (31 << 2)
#define NV30_FP_REG_SRC_HALF          (1 << 8)
#define NV30_FP_REG_SWZ_ALL_SHIFT        9
#define NV30_FP_REG_SWZ_ALL_MASK        (255 << 9)
#define NV30_FP_REG_SWZ_X_SHIFT          9
#define NV30_FP_REG_SWZ_X_MASK          (3 << 9)
#define NV30_FP_REG_SWZ_Y_SHIFT          11
#define NV30_FP_REG_SWZ_Y_MASK          (3 << 11)
#define NV30_FP_REG_SWZ_Z_SHIFT          13
#define NV30_FP_REG_SWZ_Z_MASK          (3 << 13)
#define NV30_FP_REG_SWZ_W_SHIFT          15
#define NV30_FP_REG_SWZ_W_MASK          (3 << 15)
#  define NV30_FP_SWIZZLE_X  0
#  define NV30_FP_SWIZZLE_Y  1
#  define NV30_FP_SWIZZLE_Z  2
#  define NV30_FP_SWIZZLE_W  3
#define NV30_FP_REG_NEGATE          (1 << 17)

#define NV30SR_NONE	0
#define NV30SR_OUTPUT	1
#define NV30SR_INPUT	2
#define NV30SR_TEMP	3
#define NV30SR_CONST	4

struct nv30_sreg {
	int type;
	int index;

	int dst_scale;

	int negate;
	int abs;
	int swz[4];

	int cc_update;
	int cc_update_reg;
	int cc_test;
	int cc_test_reg;
	int cc_swz[4];
};

static INLINE struct nv30_sreg
nv30_sr(int type, int index)
{
	struct nv30_sreg temp = {
		.type = type,
		.index = index,
		.dst_scale = DEF_SCALE,
		.abs = 0,
		.negate = 0,
		.swz = { 0, 1, 2, 3 },
		.cc_update = 0,
		.cc_update_reg = 0,
		.cc_test = DEF_CTEST,
		.cc_test_reg = 0,
		.cc_swz = { 0, 1, 2, 3 },
	};
	return temp;
}

static INLINE struct nv30_sreg
nv30_sr_swz(struct nv30_sreg src, int x, int y, int z, int w)
{
	struct nv30_sreg dst = src;

	dst.swz[SWZ_X] = src.swz[x];
	dst.swz[SWZ_Y] = src.swz[y];
	dst.swz[SWZ_Z] = src.swz[z];
	dst.swz[SWZ_W] = src.swz[w];
	return dst;
}

static INLINE struct nv30_sreg
nv30_sr_neg(struct nv30_sreg src)
{
	src.negate = !src.negate;
	return src;
}

static INLINE struct nv30_sreg
nv30_sr_abs(struct nv30_sreg src)
{
	src.abs = 1;
	return src;
}

static INLINE struct nv30_sreg
nv30_sr_scale(struct nv30_sreg src, int scale)
{
	src.dst_scale = scale;
	return src;
}

#endif