aboutsummaryrefslogtreecommitdiff
path: root/arch
diff options
context:
space:
mode:
authorVivek Goyal <vgoyal@in.ibm.com>2007-05-02 19:27:07 +0200
committerAndi Kleen <andi@basil.nowhere.org>2007-05-02 19:27:07 +0200
commit275f55170ec2b5d777b070cb8ab9e5d58e65a2a8 (patch)
treeb1124f3cac6975a9ef2a5a65849f9c68e71c1eab /arch
parent7db681d7e4038ad205b5face5cf7f7815633e1b5 (diff)
[PATCH] x86-64: wakeup.S misc cleanups
o Various cleanups. One of the main purpose of cleanups is that make wakeup.S as close as possible to trampoline.S. o Following are the changes - Indentations for comments. - Changed the gdt table to compact form and to resemble the one in trampoline.S - Take the jump to 32bit from real mode using ljmpl. Makes code more readable. - After enabling long mode, directly take a long jump for 64bit mode. No need to take an extra jump to "reach_comaptibility_mode" - Stack is not used after real mode. So don't load stack in 32 bit mode. - No need to enable PGE here. - No need to do extra EFER read, anyway we trash the read contents. - No need to enable system call (EFER_SCE). Anyway it will be enabled when original EFER is restored. - No need to set MP, ET, NE, WP, AM bits in cr0. Very soon we will reload the original cr0 while restroing the processor state. Signed-off-by: Eric W. Biederman <ebiederm@xmission.com> Signed-off-by: Vivek Goyal <vgoyal@in.ibm.com> Signed-off-by: Andi Kleen <ak@suse.de>
Diffstat (limited to 'arch')
-rw-r--r--arch/x86_64/kernel/acpi/wakeup.S112
1 files changed, 40 insertions, 72 deletions
diff --git a/arch/x86_64/kernel/acpi/wakeup.S b/arch/x86_64/kernel/acpi/wakeup.S
index 17dbeff64ee..bd4c6f1a6f3 100644
--- a/arch/x86_64/kernel/acpi/wakeup.S
+++ b/arch/x86_64/kernel/acpi/wakeup.S
@@ -30,11 +30,12 @@ wakeup_code:
cld
# setup data segment
movw %cs, %ax
- movw %ax, %ds # Make ds:0 point to wakeup_start
+ movw %ax, %ds # Make ds:0 point to wakeup_start
movw %ax, %ss
- mov $(wakeup_stack - wakeup_code), %sp # Private stack is needed for ASUS board
+ # Private stack is needed for ASUS board
+ mov $(wakeup_stack - wakeup_code), %sp
- pushl $0 # Kill any dangerous flags
+ pushl $0 # Kill any dangerous flags
popfl
movl real_magic - wakeup_code, %eax
@@ -45,7 +46,7 @@ wakeup_code:
jz 1f
lcall $0xc000,$3
movw %cs, %ax
- movw %ax, %ds # Bios might have played with that
+ movw %ax, %ds # Bios might have played with that
movw %ax, %ss
1:
@@ -75,9 +76,12 @@ wakeup_code:
jmp 1f
1:
- .byte 0x66, 0xea # prefix + jmpi-opcode
- .long wakeup_32 - __START_KERNEL_map
- .word __KERNEL_CS
+ ljmpl *(wakeup_32_vector - wakeup_code)
+
+ .balign 4
+wakeup_32_vector:
+ .long wakeup_32 - __START_KERNEL_map
+ .word __KERNEL32_CS, 0
.code32
wakeup_32:
@@ -96,65 +100,50 @@ wakeup_32:
jnc bogus_cpu
movl %edx,%edi
- movw $__KERNEL_DS, %ax
- movw %ax, %ds
- movw %ax, %es
- movw %ax, %fs
- movw %ax, %gs
+ movl $__KERNEL_DS, %eax
+ movl %eax, %ds
- movw $__KERNEL_DS, %ax
- movw %ax, %ss
-
- mov $(wakeup_stack - __START_KERNEL_map), %esp
movl saved_magic - __START_KERNEL_map, %eax
cmpl $0x9abcdef0, %eax
jne bogus_32_magic
+ movw $0x0e00 + 'i', %ds:(0xb8012)
+ movb $0xa8, %al ; outb %al, $0x80;
+
/*
* Prepare for entering 64bits mode
*/
- /* Enable PAE mode and PGE */
+ /* Enable PAE */
xorl %eax, %eax
btsl $5, %eax
- btsl $7, %eax
movl %eax, %cr4
/* Setup early boot stage 4 level pagetables */
movl $(wakeup_level4_pgt - __START_KERNEL_map), %eax
movl %eax, %cr3
- /* Setup EFER (Extended Feature Enable Register) */
- movl $MSR_EFER, %ecx
- rdmsr
- /* Fool rdmsr and reset %eax to avoid dependences */
- xorl %eax, %eax
/* Enable Long Mode */
+ xorl %eax, %eax
btsl $_EFER_LME, %eax
- /* Enable System Call */
- btsl $_EFER_SCE, %eax
- /* No Execute supported? */
+ /* No Execute supported? */
btl $20,%edi
jnc 1f
btsl $_EFER_NX, %eax
-1:
/* Make changes effective */
+1: movl $MSR_EFER, %ecx
+ xorl %edx, %edx
wrmsr
- wbinvd
xorl %eax, %eax
btsl $31, %eax /* Enable paging and in turn activate Long Mode */
btsl $0, %eax /* Enable protected mode */
- btsl $1, %eax /* Enable MP */
- btsl $4, %eax /* Enable ET */
- btsl $5, %eax /* Enable NE */
- btsl $16, %eax /* Enable WP */
- btsl $18, %eax /* Enable AM */
/* Make changes effective */
movl %eax, %cr0
+
/* At this point:
CR4.PAE must be 1
CS.L must be 0
@@ -162,11 +151,6 @@ wakeup_32:
Next instruction must be a branch
This must be on identity-mapped page
*/
- jmp reach_compatibility_mode
-reach_compatibility_mode:
- movw $0x0e00 + 'i', %ds:(0xb8012)
- movb $0xa8, %al ; outb %al, $0x80;
-
/*
* At this point we're in long mode but in 32bit compatibility mode
* with EFER.LME = 1, CS.L = 0, CS.D = 1 (and in turn
@@ -174,24 +158,19 @@ reach_compatibility_mode:
* the new gdt/idt that has __KERNEL_CS with CS.L = 1.
*/
- movw $0x0e00 + 'n', %ds:(0xb8014)
- movb $0xa9, %al ; outb %al, $0x80
-
- /* Load new GDT with the 64bit segment using 32bit descriptor */
- movl $(pGDT32 - __START_KERNEL_map), %eax
- lgdt (%eax)
-
- movl $(wakeup_jumpvector - __START_KERNEL_map), %eax
/* Finally jump in 64bit mode */
- ljmp *(%eax)
+ ljmp *(wakeup_long64_vector - __START_KERNEL_map)
-wakeup_jumpvector:
- .long wakeup_long64 - __START_KERNEL_map
- .word __KERNEL_CS
+ .balign 4
+wakeup_long64_vector:
+ .long wakeup_long64 - __START_KERNEL_map
+ .word __KERNEL_CS, 0
.code64
- /* Hooray, we are in Long 64-bit mode (but still running in low memory) */
+ /* Hooray, we are in Long 64-bit mode (but still running in
+ * low memory)
+ */
wakeup_long64:
/*
* We must switch to a new descriptor in kernel space for the GDT
@@ -201,6 +180,9 @@ wakeup_long64:
*/
lgdt cpu_gdt_descr - __START_KERNEL_map
+ movw $0x0e00 + 'n', %ds:(0xb8014)
+ movb $0xa9, %al ; outb %al, $0x80
+
movw $0x0e00 + 'u', %ds:(0xb8016)
nop
@@ -227,33 +209,19 @@ wakeup_long64:
.align 64
gdta:
+ /* Its good to keep gdt in sync with one in trampoline.S */
.word 0, 0, 0, 0 # dummy
-
- .word 0, 0, 0, 0 # unused
-
- .word 0xFFFF # 4Gb - (0x100000*0x1000 = 4Gb)
- .word 0 # base address = 0
- .word 0x9B00 # code read/exec. ??? Why I need 0x9B00 (as opposed to 0x9A00 in order for this to work?)
- .word 0x00CF # granularity = 4096, 386
- # (+5th nibble of limit)
-
- .word 0xFFFF # 4Gb - (0x100000*0x1000 = 4Gb)
- .word 0 # base address = 0
- .word 0x9200 # data read/write
- .word 0x00CF # granularity = 4096, 386
- # (+5th nibble of limit)
-# this is 64bit descriptor for code
- .word 0xFFFF
- .word 0
- .word 0x9A00 # code read/exec
- .word 0x00AF # as above, but it is long mode and with D=0
+ /* ??? Why I need the accessed bit set in order for this to work? */
+ .quad 0x00cf9b000000ffff # __KERNEL32_CS
+ .quad 0x00af9b000000ffff # __KERNEL_CS
+ .quad 0x00cf93000000ffff # __KERNEL_DS
idt_48a:
.word 0 # idt limit = 0
.word 0, 0 # idt base = 0L
gdt_48a:
- .word 0x8000 # gdt limit=2048,
+ .word 0x800 # gdt limit=2048,
# 256 GDT entries
.word 0, 0 # gdt base (filled in later)
@@ -263,7 +231,7 @@ video_mode: .quad 0
video_flags: .quad 0
bogus_real_magic:
- movb $0xba,%al ; outb %al,$0x80
+ movb $0xba,%al ; outb %al,$0x80
jmp bogus_real_magic
bogus_32_magic: