path: root/src/mesa/drivers/dri/r300/r300_reg.h

/**************************************************************************

Copyright (C) 2004-2005 Nicolai Haehnle et al.

Permission is hereby granted, free of charge, to any person obtaining a
copy of this software and associated documentation files (the "Software"),
to deal in the Software without restriction, including without limitation
on the rights to use, copy, modify, merge, publish, distribute, sub
license, and/or sell copies of the Software, and to permit persons to whom
the Software is furnished to do so, subject to the following conditions:

The above copyright notice and this permission notice (including the next
paragraph) shall be included in all copies or substantial portions of the
Software.

THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
FITNESS FOR A PARTICULAR PURPOSE AND NON-INFRINGEMENT. IN NO EVENT SHALL
THE AUTHOR(S) AND/OR THEIR SUPPLIERS BE LIABLE FOR ANY CLAIM,
DAMAGES OR OTHER LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR
OTHERWISE, ARISING FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE
USE OR OTHER DEALINGS IN THE SOFTWARE.

**************************************************************************/

/* *INDENT-OFF* */

#ifndef _R300_REG_H
#define _R300_REG_H

#define R300_MC_INIT_MISC_LAT_TIMER	0x180
#	define R300_MC_MISC__MC_CPR_INIT_LAT_SHIFT	0
#	define R300_MC_MISC__MC_VF_INIT_LAT_SHIFT	4
#	define R300_MC_MISC__MC_DISP0R_INIT_LAT_SHIFT	8
#	define R300_MC_MISC__MC_DISP1R_INIT_LAT_SHIFT	12
#	define R300_MC_MISC__MC_FIXED_INIT_LAT_SHIFT	16
#	define R300_MC_MISC__MC_E2R_INIT_LAT_SHIFT	20
#	define R300_MC_MISC__MC_SAME_PAGE_PRIO_SHIFT	24
#	define R300_MC_MISC__MC_GLOBW_INIT_LAT_SHIFT	28


#define R300_MC_INIT_GFX_LAT_TIMER	0x154
#	define R300_MC_MISC__MC_G3D0R_INIT_LAT_SHIFT	0
#	define R300_MC_MISC__MC_G3D1R_INIT_LAT_SHIFT	4
#	define R300_MC_MISC__MC_G3D2R_INIT_LAT_SHIFT	8
#	define R300_MC_MISC__MC_G3D3R_INIT_LAT_SHIFT	12
#	define R300_MC_MISC__MC_TX0R_INIT_LAT_SHIFT	16
#	define R300_MC_MISC__MC_TX1R_INIT_LAT_SHIFT	20
#	define R300_MC_MISC__MC_GLOBR_INIT_LAT_SHIFT	24
#	define R300_MC_MISC__MC_GLOBW_FULL_LAT_SHIFT	28

/*
 * This file contains registers and constants for the R300. They have been
 * found mostly by examining command buffers captured using glxtest, as well
 * as by extrapolating some known registers and constants from the R200.
 * I am fairly certain that they are correct unless stated otherwise
 * in comments.
 */

#define R300_SE_VPORT_XSCALE                0x1D98
#define R300_SE_VPORT_XOFFSET               0x1D9C
#define R300_SE_VPORT_YSCALE                0x1DA0
#define R300_SE_VPORT_YOFFSET               0x1DA4
#define R300_SE_VPORT_ZSCALE                0x1DA8
#define R300_SE_VPORT_ZOFFSET               0x1DAC


/*
 * Vertex Array Processing (VAP) Control
 * Stolen from r200 code from Christoph Brill (It's a guess!)
 */
#define R300_VAP_CNTL	0x2080

/* This register is written directly and also starts data section
 * in many 3d CP_PACKET3's
 */
#define R300_VAP_VF_CNTL	0x2084
#	define	R300_VAP_VF_CNTL__PRIM_TYPE__SHIFT              0
#	define  R300_VAP_VF_CNTL__PRIM_NONE                     (0<<0)
#	define  R300_VAP_VF_CNTL__PRIM_POINTS                   (1<<0)
#	define  R300_VAP_VF_CNTL__PRIM_LINES                    (2<<0)
#	define  R300_VAP_VF_CNTL__PRIM_LINE_STRIP               (3<<0)
#	define  R300_VAP_VF_CNTL__PRIM_TRIANGLES                (4<<0)
#	define  R300_VAP_VF_CNTL__PRIM_TRIANGLE_FAN             (5<<0)
#	define  R300_VAP_VF_CNTL__PRIM_TRIANGLE_STRIP           (6<<0)
#	define  R300_VAP_VF_CNTL__PRIM_LINE_LOOP                (12<<0)
#	define  R300_VAP_VF_CNTL__PRIM_QUADS                    (13<<0)
#	define  R300_VAP_VF_CNTL__PRIM_QUAD_STRIP               (14<<0)
#	define  R300_VAP_VF_CNTL__PRIM_POLYGON                  (15<<0)

#	define	R300_VAP_VF_CNTL__PRIM_WALK__SHIFT              4
	/* State based - direct writes to registers trigger vertex
           generation */
#	define	R300_VAP_VF_CNTL__PRIM_WALK_STATE_BASED         (0<<4)
#	define	R300_VAP_VF_CNTL__PRIM_WALK_INDICES             (1<<4)
#	define	R300_VAP_VF_CNTL__PRIM_WALK_VERTEX_LIST         (2<<4)
#	define	R300_VAP_VF_CNTL__PRIM_WALK_VERTEX_EMBEDDED     (3<<4)

	/* I don't think I saw these three used.. */
#	define	R300_VAP_VF_CNTL__COLOR_ORDER__SHIFT            6
#	define	R300_VAP_VF_CNTL__TCL_OUTPUT_CTL_ENA__SHIFT     9
#	define	R300_VAP_VF_CNTL__PROG_STREAM_ENA__SHIFT        10

	/* index size - when not set the indices are assumed to be 16 bit */
#	define	R300_VAP_VF_CNTL__INDEX_SIZE_32bit              (1<<11)
	/* number of vertices */
#	define	R300_VAP_VF_CNTL__NUM_VERTICES__SHIFT           16

#define R300_VAP_OUTPUT_VTX_FMT_0           0x2090
#       define R300_VAP_OUTPUT_VTX_FMT_0__POS_PRESENT     (1<<0)
#       define R300_VAP_OUTPUT_VTX_FMT_0__COLOR_0_PRESENT (1<<1)
#       define R300_VAP_OUTPUT_VTX_FMT_0__COLOR_1_PRESENT (1<<2)
#       define R300_VAP_OUTPUT_VTX_FMT_0__COLOR_2_PRESENT (1<<3)
#       define R300_VAP_OUTPUT_VTX_FMT_0__COLOR_3_PRESENT (1<<4)
#       define R300_VAP_OUTPUT_VTX_FMT_0__PT_SIZE_PRESENT (1<<16)

#define R300_VAP_OUTPUT_VTX_FMT_1           0x2094
	/* each of the following is 3 bits wide, specifies number
	   of components */
#       define R300_VAP_OUTPUT_VTX_FMT_1__TEX_0_COMP_CNT_SHIFT 0
#       define R300_VAP_OUTPUT_VTX_FMT_1__TEX_1_COMP_CNT_SHIFT 3
#       define R300_VAP_OUTPUT_VTX_FMT_1__TEX_2_COMP_CNT_SHIFT 6
#       define R300_VAP_OUTPUT_VTX_FMT_1__TEX_3_COMP_CNT_SHIFT 9
#       define R300_VAP_OUTPUT_VTX_FMT_1__TEX_4_COMP_CNT_SHIFT 12
#       define R300_VAP_OUTPUT_VTX_FMT_1__TEX_5_COMP_CNT_SHIFT 15
#       define R300_VAP_OUTPUT_VTX_FMT_1__TEX_6_COMP_CNT_SHIFT 18
#       define R300_VAP_OUTPUT_VTX_FMT_1__TEX_7_COMP_CNT_SHIFT 21
#	define R300_VAP_OUTPUT_VTX_FMT_1__NOT_PRESENT  (1<<0)
#	define R300_VAP_OUTPUT_VTX_FMT_1__1_COMPONENT  (1<<1)
#	define R300_VAP_OUTPUT_VTX_FMT_1__2_COMPONENTS (1<<2)
#	define R300_VAP_OUTPUT_VTX_FMT_1__3_COMPONENTS (1<<3)
#	define R300_VAP_OUTPUT_VTX_FMT_1__4_COMPONENTS (1<<4)

#define R300_SE_VTE_CNTL                  0x20b0
#	define     R300_VPORT_X_SCALE_ENA                0x00000001
#	define     R300_VPORT_X_OFFSET_ENA               0x00000002
#	define     R300_VPORT_Y_SCALE_ENA                0x00000004
#	define     R300_VPORT_Y_OFFSET_ENA               0x00000008
#	define     R300_VPORT_Z_SCALE_ENA                0x00000010
#	define     R300_VPORT_Z_OFFSET_ENA               0x00000020
#	define     R300_VTX_XY_FMT                       0x00000100
#	define     R300_VTX_Z_FMT                        0x00000200
#	define     R300_VTX_W0_FMT                       0x00000400
#	define     R300_VTX_W0_NORMALIZE                 0x00000800
#	define     R300_VTX_ST_DENORMALIZED              0x00001000

/* BEGIN: Vertex data assembly - lots of uncertainties */

/* gap */

/* Maximum Vertex Indx Clamp */
#define R300_VAP_VF_MAX_VTX_INDX         0x2134
/* Minimum Vertex Indx Clamp */
#define R300_VAP_VF_MIN_VTX_INDX         0x2138

/** Vertex assembler/processor control status */
#define R300_VAP_CNTL_STATUS              0x2140
/* No swap at all (default) */
#	define R300_VC_NO_SWAP                  (0 << 0)
/* 16-bit swap: 0xAABBCCDD becomes 0xBBAADDCC */
#	define R300_VC_16BIT_SWAP               (1 << 0)
/* 32-bit swap: 0xAABBCCDD becomes 0xDDCCBBAA */
#	define R300_VC_32BIT_SWAP               (2 << 0)
/* Half-dword swap: 0xAABBCCDD becomes 0xCCDDAABB */
#	define R300_VC_HALF_DWORD_SWAP          (3 << 0)
/* The TCL engine will not be used (as it is logically or even physically removed) */
#	define R300_VAP_TCL_BYPASS		(1 << 8)
/* Read only flag if TCL engine is busy. */
#	define R300_VAP_PVS_BUSY                (1 << 11)
/* TODO: gap for MAX_MPS */
/* Read only flag if the vertex store is busy. */
#	define R300_VAP_VS_BUSY                 (1 << 24)
/* Read only flag if the reciprocal engine is busy. */
#	define R300_VAP_RCP_BUSY                (1 << 25)
/* Read only flag if the viewport transform engine is busy. */
#	define R300_VAP_VTE_BUSY                (1 << 26)
/* Read only flag if the memory interface unit is busy. */
#	define R300_VAP_MUI_BUSY                (1 << 27)
/* Read only flag if the vertex cache is busy. */
#	define R300_VAP_VC_BUSY                 (1 << 28)
/* Read only flag if the vertex fetcher is busy. */
#	define R300_VAP_VF_BUSY                 (1 << 29)
/* Read only flag if the register pipeline is busy. */
#	define R300_VAP_REGPIPE_BUSY            (1 << 30)
/* Read only flag if the VAP engine is busy. */
#	define R300_VAP_VAP_BUSY                (1 << 31)

/* gap */

/* Where do we get our vertex data?
 *
 * Vertex data either comes either from immediate mode registers or from
 * vertex arrays.
 * There appears to be no mixed mode (though we can force the pitch of
 * vertex arrays to 0, effectively reusing the same element over and over
 * again).
 *
 * Immediate mode is controlled by the INPUT_CNTL registers. I am not sure
 * if these registers influence vertex array processing.
 *
 * Vertex arrays are controlled via the 3D_LOAD_VBPNTR packet3.
 *
 * In both cases, vertex attributes are then passed through INPUT_ROUTE.
 *
 * Beginning with INPUT_ROUTE_0_0 is a list of WORDs that route vertex data
 * into the vertex processor's input registers.
 * The first word routes the first input, the second word the second, etc.
 * The corresponding input is routed into the register with the given index.
 * The list is ended by a word with INPUT_ROUTE_END set.
 *
 * Always set COMPONENTS_4 in immediate mode.
 */

#define R300_VAP_INPUT_ROUTE_0_0            0x2150
#       define R300_INPUT_ROUTE_COMPONENTS_1     (0 << 0)
#       define R300_INPUT_ROUTE_COMPONENTS_2     (1 << 0)
#       define R300_INPUT_ROUTE_COMPONENTS_3     (2 << 0)
#       define R300_INPUT_ROUTE_COMPONENTS_4     (3 << 0)
#       define R300_INPUT_ROUTE_COMPONENTS_RGBA  (4 << 0) /* GUESS */
#       define R300_VAP_INPUT_ROUTE_IDX_SHIFT    8
#       define R300_VAP_INPUT_ROUTE_IDX_MASK     (31 << 8) /* GUESS */
#       define R300_VAP_INPUT_ROUTE_END          (1 << 13)
#       define R300_INPUT_ROUTE_IMMEDIATE_MODE   (0 << 14) /* GUESS */
#       define R300_INPUT_ROUTE_FLOAT            (1 << 14) /* GUESS */
#       define R300_INPUT_ROUTE_UNSIGNED_BYTE    (2 << 14) /* GUESS */
#       define R300_INPUT_ROUTE_FLOAT_COLOR      (3 << 14) /* GUESS */
#define R300_VAP_INPUT_ROUTE_0_1            0x2154
#define R300_VAP_INPUT_ROUTE_0_2            0x2158
#define R300_VAP_INPUT_ROUTE_0_3            0x215C
#define R300_VAP_INPUT_ROUTE_0_4            0x2160
#define R300_VAP_INPUT_ROUTE_0_5            0x2164
#define R300_VAP_INPUT_ROUTE_0_6            0x2168
#define R300_VAP_INPUT_ROUTE_0_7            0x216C

/* gap */

/* Notes:
 *  - always set up to produce at least two attributes:
 *    if vertex program uses only position, fglrx will set normal, too
 *  - INPUT_CNTL_0_COLOR and INPUT_CNTL_COLOR bits are always equal.
 */
#define R300_VAP_INPUT_CNTL_0               0x2180
#       define R300_INPUT_CNTL_0_COLOR           0x00000001
#define R300_VAP_INPUT_CNTL_1               0x2184
#       define R300_INPUT_CNTL_POS               0x00000001
#       define R300_INPUT_CNTL_NORMAL            0x00000002
#       define R300_INPUT_CNTL_COLOR             0x00000004
#       define R300_INPUT_CNTL_TC0               0x00000400
#       define R300_INPUT_CNTL_TC1               0x00000800
#       define R300_INPUT_CNTL_TC2               0x00001000 /* GUESS */
#       define R300_INPUT_CNTL_TC3               0x00002000 /* GUESS */
#       define R300_INPUT_CNTL_TC4               0x00004000 /* GUESS */
#       define R300_INPUT_CNTL_TC5               0x00008000 /* GUESS */
#       define R300_INPUT_CNTL_TC6               0x00010000 /* GUESS */
#       define R300_INPUT_CNTL_TC7               0x00020000 /* GUESS */

/* Programmable Stream Control Signed Normalize Control */
#define R300_VAP_PSC_SGN_NORM_CNTL         0x21dc
#	define SGN_NORM_ZERO                 0
#	define SGN_NORM_ZERO_CLAMP_MINUS_ONE 1
#	define SGN_NORM_NO_ZERO              2

/* gap */

/* Words parallel to INPUT_ROUTE_0; All words that are active in INPUT_ROUTE_0
 * are set to a swizzling bit pattern, other words are 0.
 *
 * In immediate mode, the pattern is always set to xyzw. In vertex array
 * mode, the swizzling pattern is e.g. used to set zw components in texture
 * coordinates with only tweo components.
 */
#define R300_VAP_INPUT_ROUTE_1_0            0x21E0
#       define R300_INPUT_ROUTE_SELECT_X    0
#       define R300_INPUT_ROUTE_SELECT_Y    1
#       define R300_INPUT_ROUTE_SELECT_Z    2
#       define R300_INPUT_ROUTE_SELECT_W    3
#       define R300_INPUT_ROUTE_SELECT_ZERO 4
#       define R300_INPUT_ROUTE_SELECT_ONE  5
#       define R300_INPUT_ROUTE_SELECT_MASK 7
#       define R300_INPUT_ROUTE_X_SHIFT     0
#       define R300_INPUT_ROUTE_Y_SHIFT     3
#       define R300_INPUT_ROUTE_Z_SHIFT     6
#       define R300_INPUT_ROUTE_W_SHIFT     9
#       define R300_INPUT_ROUTE_ENABLE      (15 << 12)
#define R300_VAP_INPUT_ROUTE_1_1            0x21E4
#define R300_VAP_INPUT_ROUTE_1_2            0x21E8
#define R300_VAP_INPUT_ROUTE_1_3            0x21EC
#define R300_VAP_INPUT_ROUTE_1_4            0x21F0
#define R300_VAP_INPUT_ROUTE_1_5            0x21F4
#define R300_VAP_INPUT_ROUTE_1_6            0x21F8
#define R300_VAP_INPUT_ROUTE_1_7            0x21FC

/* END: Vertex data assembly */

/* gap */

/* BEGIN: Upload vertex program and data */

/*
 * The programmable vertex shader unit has a memory bank of unknown size
 * that can be written to in 16 byte units by writing the address into
 * UPLOAD_ADDRESS, followed by data in UPLOAD_DATA (multiples of 4 DWORDs).
 *
 * Pointers into the memory bank are always in multiples of 16 bytes.
 *
 * The memory bank is divided into areas with fixed meaning.
 *
 * Starting at address UPLOAD_PROGRAM: Vertex program instructions.
 * Native limits reported by drivers from ATI suggest size 256 (i.e. 4KB),
 * whereas the difference between known addresses suggests size 512.
 *
 * Starting at address UPLOAD_PARAMETERS: Vertex program parameters.
 * Native reported limits and the VPI layout suggest size 256, whereas
 * difference between known addresses suggests size 512.
 *
 * At address UPLOAD_POINTSIZE is a vector (0, 0, ps, 0), where ps is the
 * floating point pointsize. The exact purpose of this state is uncertain,
 * as there is also the R300_RE_POINTSIZE register.
 *
 * Multiple vertex programs and parameter sets can be loaded at once,
 * which could explain the size discrepancy.
 */
#define R300_VAP_PVS_UPLOAD_ADDRESS         0x2200
#       define R300_PVS_UPLOAD_PROGRAM           0x00000000
/* gap */
#       define R300_PVS_UPLOAD_PARAMETERS        0x00000200
/* gap */
#       define R300_PVS_UPLOAD_CLIP_PLANE0       0x00000400
#       define R300_PVS_UPLOAD_CLIP_PLANE1       0x00000401
#       define R300_PVS_UPLOAD_CLIP_PLANE2       0x00000402
#       define R300_PVS_UPLOAD_CLIP_PLANE3       0x00000403
#       define R300_PVS_UPLOAD_CLIP_PLANE4       0x00000404
#       define R300_PVS_UPLOAD_CLIP_PLANE5       0x00000405
#       define R300_PVS_UPLOAD_POINTSIZE         0x00000406

#       define R500_PVS_UPLOAD_CLIP_PLANE0       0x00000600
#       define R500_PVS_UPLOAD_CLIP_PLANE1       0x00000601
#       define R500_PVS_UPLOAD_CLIP_PLANE2       0x00000602
#       define R500_PVS_UPLOAD_CLIP_PLANE3       0x00000603
#       define R500_PVS_UPLOAD_CLIP_PLANE4       0x00000604
#       define R500_PVS_UPLOAD_CLIP_PLANE5       0x00000605

/*
 * These are obsolete defines form r300_context.h, but they might give some
 * clues when investigating the addresses further...
 */
#if 0
#define VSF_DEST_PROGRAM        0x0
#define VSF_DEST_MATRIX0        0x200
#define VSF_DEST_MATRIX1        0x204
#define VSF_DEST_MATRIX2        0x208
#define VSF_DEST_VECTOR0        0x20c
#define VSF_DEST_VECTOR1        0x20d
#define VSF_DEST_UNKNOWN1       0x400
#define VSF_DEST_UNKNOWN2       0x406
#endif

/* gap */

#define R300_VAP_PVS_UPLOAD_DATA            0x2208

/* END: Upload vertex program and data */

/* gap */

/* I do not know the purpose of this register. However, I do know that
 * it is set to 221C_CLEAR for clear operations and to 221C_NORMAL
 * for normal rendering.
 *
 * 2007-11-05: This register is the user clip plane control register, but there
 * also seems to be a rendering mode control; the NORMAL/CLEAR defines.
 *
 * See bug #9871. http://bugs.freedesktop.org/attachment.cgi?id=10672&action=view
 */
#define R300_VAP_CLIP_CNTL                       0x221C
#       define R300_221C_NORMAL                  0x00000000
#       define R300_221C_CLEAR                   0x0001C000
#define R300_VAP_UCP_ENABLE_0 (1 << 0)

/* These seem to be per-pixel and per-vertex X and Y clipping planes. The first
 * plane is per-pixel and the second plane is per-vertex.
 *
 * This was determined by experimentation alone but I believe it is correct.
 *
 * These registers are called X_QUAD0_1_FL to X_QUAD0_4_FL by glxtest.
 */
#define R300_VAP_CLIP_X_0                   0x2220
#define R300_VAP_CLIP_X_1                   0x2224
#define R300_VAP_CLIP_Y_0                   0x2228
#define R300_VAP_CLIP_Y_1                   0x222c

/* gap */

/* Sometimes, END_OF_PKT and 0x2284=0 are the only commands sent between
 * rendering commands and overwriting vertex program parameters.
 * Therefore, I suspect writing zero to 0x2284 synchronizes the engine and
 * avoids bugs caused by still running shaders reading bad data from memory.
 */
#define R300_VAP_PVS_WAITIDLE               0x2284 /* GUESS */

/* This register is used to define the number of core clocks to wait for a
 * vertex to be received by the VAP input controller (while the primitive
 * path is backed up) before forcing any accumulated vertices to be submitted
 * to the vertex processing path.
 */
#define VAP_PVS_VTX_TIMEOUT_REG             0x2288
#       define R300_2288_R300                    0x00750000 /* -- nh */
#       define R300_2288_RV350                   0x0000FFFF /* -- Vladimir */

/* gap */

/* Addresses are relative to the vertex program instruction area of the
 * memory bank. PROGRAM_END points to the last instruction of the active
 * program
 *
 * The meaning of the two UNKNOWN fields is obviously not known. However,
 * experiments so far have shown that both *must* point to an instruction
 * inside the vertex program, otherwise the GPU locks up.
 *
 * fglrx usually sets CNTL_3_UNKNOWN to the end of the program and
 * R300_PVS_CNTL_1_POS_END_SHIFT points to instruction where last write to
 * position takes place.
 *
 * Most likely this is used to ignore rest of the program in cases
 * where group of verts arent visible. For some reason this "section"
 * is sometimes accepted other instruction that have no relationship with
 * position calculations.
 */
#define R300_VAP_PVS_CNTL_1                 0x22D0
#       define R300_PVS_CNTL_1_PROGRAM_START_SHIFT   0
#       define R300_PVS_CNTL_1_POS_END_SHIFT         10
#       define R300_PVS_CNTL_1_PROGRAM_END_SHIFT     20
/* Addresses are relative the the vertex program parameters area. */
#define R300_VAP_PVS_CNTL_2                 0x22D4
#       define R300_PVS_CNTL_2_PARAM_OFFSET_SHIFT 0
#       define R300_PVS_CNTL_2_PARAM_COUNT_SHIFT  16
#define R300_VAP_PVS_CNTL_3	           0x22D8
#       define R300_PVS_CNTL_3_PROGRAM_UNKNOWN_SHIFT 10
#       define R300_PVS_CNTL_3_PROGRAM_UNKNOWN2_SHIFT 0

/* The entire range from 0x2300 to 0x2AC inclusive seems to be used for
 * immediate vertices
 */
#define R300_VAP_VTX_COLOR_R                0x2464
#define R300_VAP_VTX_COLOR_G                0x2468
#define R300_VAP_VTX_COLOR_B                0x246C
#define R300_VAP_VTX_POS_0_X_1              0x2490 /* used for glVertex2*() */
#define R300_VAP_VTX_POS_0_Y_1              0x2494
#define R300_VAP_VTX_COLOR_PKD              0x249C /* RGBA */
#define R300_VAP_VTX_POS_0_X_2              0x24A0 /* used for glVertex3*() */
#define R300_VAP_VTX_POS_0_Y_2              0x24A4
#define R300_VAP_VTX_POS_0_Z_2              0x24A8
/* write 0 to indicate end of packet? */
#define R300_VAP_VTX_END_OF_PKT             0x24AC

/* gap */

/* These are values from r300_reg/r300_reg.h - they are known to be correct
 * and are here so we can use one register file instead of several
 * - Vladimir
 */
#define R300_GB_VAP_RASTER_VTX_FMT_0	0x4000
#	define R300_GB_VAP_RASTER_VTX_FMT_0__POS_PRESENT	(1<<0)
#	define R300_GB_VAP_RASTER_VTX_FMT_0__COLOR_0_PRESENT	(1<<1)
#	define R300_GB_VAP_RASTER_VTX_FMT_0__COLOR_1_PRESENT	(1<<2)
#	define R300_GB_VAP_RASTER_VTX_FMT_0__COLOR_2_PRESENT	(1<<3)
#	define R300_GB_VAP_RASTER_VTX_FMT_0__COLOR_3_PRESENT	(1<<4)
#	define R300_GB_VAP_RASTER_VTX_FMT_0__COLOR_SPACE	(0xf<<5)
#	define R300_GB_VAP_RASTER_VTX_FMT_0__PT_SIZE_PRESENT	(0x1<<16)

#define R300_GB_VAP_RASTER_VTX_FMT_1	0x4004
	/* each of the following is 3 bits wide, specifies number
	   of components */
#	define R300_GB_VAP_RASTER_VTX_FMT_1__TEX_0_COMP_CNT_SHIFT	0
#	define R300_GB_VAP_RASTER_VTX_FMT_1__TEX_1_COMP_CNT_SHIFT	3
#	define R300_GB_VAP_RASTER_VTX_FMT_1__TEX_2_COMP_CNT_SHIFT	6
#	define R300_GB_VAP_RASTER_VTX_FMT_1__TEX_3_COMP_CNT_SHIFT	9
#	define R300_GB_VAP_RASTER_VTX_FMT_1__TEX_4_COMP_CNT_SHIFT	12
#	define R300_GB_VAP_RASTER_VTX_FMT_1__TEX_5_COMP_CNT_SHIFT	15
#	define R300_GB_VAP_RASTER_VTX_FMT_1__TEX_6_COMP_CNT_SHIFT	18
#	define R300_GB_VAP_RASTER_VTX_FMT_1__TEX_7_COMP_CNT_SHIFT	21

/* UNK30 seems to enables point to quad transformation on textures
 * (or something closely related to that).
 * This bit is rather fatal at the time being due to lackings at pixel
 * shader side
 * Specifies top of Raster pipe specific enable controls.
 */
#define R300_GB_ENABLE	0x4008
#	define R300_GB_POINT_STUFF_DISABLE     (0 << 0)
#	define R300_GB_POINT_STUFF_ENABLE      (1 << 0) /* Specifies if points will have stuffed texture coordinates. */
#	define R300_GB_LINE_STUFF_DISABLE      (0 << 1)
#	define R300_GB_LINE_STUFF_ENABLE       (1 << 1) /* Specifies if lines will have stuffed texture coordinates. */
#	define R300_GB_TRIANGLE_STUFF_DISABLE  (0 << 2)
#	define R300_GB_TRIANGLE_STUFF_ENABLE   (1 << 2) /* Specifies if triangles will have stuffed texture coordinates. */
#	define R300_GB_STENCIL_AUTO_DISABLE    (0 << 4)
#	define R300_GB_STENCIL_AUTO_ENABLE     (1 << 4) /* Enable stencil auto inc/dec based on triangle cw/ccw, force into dzy low bit. */
#	define R300_GB_STENCIL_AUTO_FORCE      (2 << 4) /* Force 0 into dzy low bit. */

	/* each of the following is 2 bits wide */
#define R300_GB_TEX_REPLICATE	0 /* Replicate VAP source texture coordinates (S,T,[R,Q]). */
#define R300_GB_TEX_ST		1 /* Stuff with source texture coordinates (S,T). */
#define R300_GB_TEX_STR		2 /* Stuff with source texture coordinates (S,T,R). */
#	define R300_GB_TEX0_SOURCE_SHIFT	16
#	define R300_GB_TEX1_SOURCE_SHIFT	18
#	define R300_GB_TEX2_SOURCE_SHIFT	20
#	define R300_GB_TEX3_SOURCE_SHIFT	22
#	define R300_GB_TEX4_SOURCE_SHIFT	24
#	define R300_GB_TEX5_SOURCE_SHIFT	26
#	define R300_GB_TEX6_SOURCE_SHIFT	28
#	define R300_GB_TEX7_SOURCE_SHIFT	30

/* MSPOS - positions for multisample antialiasing (?) */
#define R300_GB_MSPOS0                           0x4010
	/* shifts - each of the fields is 4 bits */
#	define R300_GB_MSPOS0__MS_X0_SHIFT	0
#	define R300_GB_MSPOS0__MS_Y0_SHIFT	4
#	define R300_GB_MSPOS0__MS_X1_SHIFT	8
#	define R300_GB_MSPOS0__MS_Y1_SHIFT	12
#	define R300_GB_MSPOS0__MS_X2_SHIFT	16
#	define R300_GB_MSPOS0__MS_Y2_SHIFT	20
#	define R300_GB_MSPOS0__MSBD0_Y		24
#	define R300_GB_MSPOS0__MSBD0_X		28

#define R300_GB_MSPOS1                           0x4014
#	define R300_GB_MSPOS1__MS_X3_SHIFT	0
#	define R300_GB_MSPOS1__MS_Y3_SHIFT	4
#	define R300_GB_MSPOS1__MS_X4_SHIFT	8
#	define R300_GB_MSPOS1__MS_Y4_SHIFT	12
#	define R300_GB_MSPOS1__MS_X5_SHIFT	16
#	define R300_GB_MSPOS1__MS_Y5_SHIFT	20
#	define R300_GB_MSPOS1__MSBD1		24

/* Specifies the graphics pipeline configuration for rasterization. */
#define R300_GB_TILE_CONFIG                      0x4018
#	define R300_GB_TILE_DISABLE             (0 << 0)
#	define R300_GB_TILE_ENABLE              (1 << 0)
#	define R300_GB_TILE_PIPE_COUNT_RV300	(0 << 1) /* RV350 (1 pipe, 1 ctx) */
#	define R300_GB_TILE_PIPE_COUNT_R300	(3 << 1) /* R300 (2 pipes, 1 ctx) */
#	define R300_GB_TILE_PIPE_COUNT_R420_3P  (6 << 1) /* R420-3P (3 pipes, 1 ctx) */
#	define R300_GB_TILE_PIPE_COUNT_R420	(7 << 1) /* R420 (4 pipes, 1 ctx) */
#	define R300_GB_TILE_SIZE_8		(0 << 4)
#	define R300_GB_TILE_SIZE_16		(1 << 4)
#	define R300_GB_TILE_SIZE_32		(2 << 4)
#	define R300_GB_SUPER_SIZE_1		(0 << 6)
#	define R300_GB_SUPER_SIZE_2		(1 << 6)
#	define R300_GB_SUPER_SIZE_4		(2 << 6)
#	define R300_GB_SUPER_SIZE_8		(3 << 6)
#	define R300_GB_SUPER_SIZE_16		(4 << 6)
#	define R300_GB_SUPER_SIZE_32		(5 << 6)
#	define R300_GB_SUPER_SIZE_64		(6 << 6)
#	define R300_GB_SUPER_SIZE_128		(7 << 6)
#	define R300_GB_SUPER_X_SHIFT		9	/* 3 bits wide */
#	define R300_GB_SUPER_Y_SHIFT		12	/* 3 bits wide */
#	define R300_GB_SUPER_TILE_A		(0 << 15)
#	define R300_GB_SUPER_TILE_B		(1 << 15)
#	define R300_GB_SUBPIXEL_1_12		(0 << 16)
#	define R300_GB_SUBPIXEL_1_16		(1 << 16)
#	define GB_TILE_CONFIG_QUADS_PER_RAS_4   (0 << 17)
#	define GB_TILE_CONFIG_QUADS_PER_RAS_8   (1 << 17)
#	define GB_TILE_CONFIG_QUADS_PER_RAS_16  (2 << 17)
#	define GB_TILE_CONFIG_QUADS_PER_RAS_32  (3 << 17)
#	define GB_TILE_CONFIG_BB_SCAN_INTERCEPT (0 << 19)
#	define GB_TILE_CONFIG_BB_SCAN_BOUND_BOX (1 << 19)
#	define GB_TILE_CONFIG_ALT_SCAN_EN_LR    (0 << 20)
#	define GB_TILE_CONFIG_ALT_SCAN_EN_LRL   (1 << 20)
#	define GB_TILE_CONFIG_ALT_OFFSET        (0 << 21)
#	define GB_TILE_CONFIG_SUBPRECISION      (0 << 22)
#	define GB_TILE_CONFIG_ALT_TILING_DEF    (0 << 23)
#	define GB_TILE_CONFIG_ALT_TILING_3_2    (1 << 23)
#	define GB_TILE_CONFIG_Z_EXTENDED_24_1   (0 << 24)
#	define GB_TILE_CONFIG_Z_EXTENDED_S25_1  (1 << 24)

/* Specifies the sizes of the various FIFO`s in the sc/rs/us. This register must be the first one written */
#define R300_GB_FIFO_SIZE	0x4024
	/* each of the following is 2 bits wide */
#define R300_GB_FIFO_SIZE_32	0
#define R300_GB_FIFO_SIZE_64	1
#define R300_GB_FIFO_SIZE_128	2
#define R300_GB_FIFO_SIZE_256	3
#	define R300_SC_IFIFO_SIZE_SHIFT	0
#	define R300_SC_TZFIFO_SIZE_SHIFT	2
#	define R300_SC_BFIFO_SIZE_SHIFT	4

#	define R300_US_OFIFO_SIZE_SHIFT	12
#	define R300_US_WFIFO_SIZE_SHIFT	14
	/* the following use the same constants as above, but meaning is
	   is times 2 (i.e. instead of 32 words it means 64 */
#	define R300_RS_TFIFO_SIZE_SHIFT	6
#	define R300_RS_CFIFO_SIZE_SHIFT	8
#	define R300_US_RAM_SIZE_SHIFT		10
	/* watermarks, 3 bits wide */
#	define R300_RS_HIGHWATER_COL_SHIFT	16
#	define R300_RS_HIGHWATER_TEX_SHIFT	19
#	define R300_OFIFO_HIGHWATER_SHIFT	22	/* two bits only */
#	define R300_CUBE_FIFO_HIGHWATER_COL_SHIFT	24

#define GB_Z_PEQ_CONFIG                          0x4028
#	define GB_Z_PEQ_CONFIG_Z_PEQ_SIZE_4_4    (0 << 0)
#	define GB_Z_PEQ_CONFIG_Z_PEQ_SIZE_8_8    (1 << 0)

/* Specifies various polygon specific selects (fog, depth, perspective). */
#define R300_GB_SELECT                           0x401c
#	define R300_GB_FOG_SELECT_C0A		(0 << 0)
#	define R300_GB_FOG_SELECT_C1A           (1 << 0)
#	define R300_GB_FOG_SELECT_C2A           (2 << 0)
#	define R300_GB_FOG_SELECT_C3A           (3 << 0)
#	define R300_GB_FOG_SELECT_1_1_W         (4 << 0)
#	define R300_GB_FOG_SELECT_Z		(5 << 0)
#	define R300_GB_DEPTH_SELECT_Z		(0 << 3
#	define R300_GB_DEPTH_SELECT_1_1_W	(1 << 3)
#	define R300_GB_W_SELECT_1_W		(0 << 4)
#	define R300_GB_W_SELECT_1		(1 << 4)
#	define R300_GB_FOG_STUFF_DISABLE        (0 << 5)
#	define R300_GB_FOG_STUFF_ENABLE         (1 << 5)
#	define R300_GB_FOG_STUFF_TEX_SHIFT      6
#	define R300_GB_FOG_STUFF_TEX_MASK       0x000003c0
#	define R300_GB_FOG_STUFF_COMP_SHIFT     10
#	define R300_GB_FOG_STUFF_COMP_MASK      0x00000c00

/* Specifies the graphics pipeline configuration for antialiasing. */
#define GB_AA_CONFIG   	                         0x4020
#	define GB_AA_CONFIG_AA_DISABLE           (0 << 0)
#	define GB_AA_CONFIG_AA_ENABLE            (1 << 0)
#	define GB_AA_CONFIG_NUM_AA_SUBSAMPLES_2  (0 << 1)
#	define GB_AA_CONFIG_NUM_AA_SUBSAMPLES_3  (1 << 1)
#	define GB_AA_CONFIG_NUM_AA_SUBSAMPLES_4  (2 << 1)
#	define GB_AA_CONFIG_NUM_AA_SUBSAMPLES_6  (3 << 1)

/* Selects which of 4 pipes are active. */
#define GB_PIPE_SELECT                           0x402c
#	define GB_PIPE_SELECT_PIPE0_ID_SHIFT  0
#	define GB_PIPE_SELECT_PIPE1_ID_SHIFT  2
#	define GB_PIPE_SELECT_PIPE2_ID_SHIFT  4
#	define GB_PIPE_SELECT_PIPE3_ID_SHIFT  6
#	define GB_PIPE_SELECT_PIPE_MASK_SHIFT 8
#	define GB_PIPE_SELECT_MAX_PIPE        12
#	define GB_PIPE_SELECT_BAD_PIPES       14
#	define GB_PIPE_SELECT_CONFIG_PIPES    18


/* Specifies the sizes of the various FIFO`s in the sc/rs. */
#define GB_FIFO_SIZE1                            0x4070
/* High water mark for SC input fifo */
#	define GB_FIFO_SIZE1_SC_HIGHWATER_IFIFO_SHIFT 0
#	define GB_FIFO_SIZE1_SC_HIGHWATER_IFIFO_MASK  0x0000003f
/* High water mark for SC input fifo (B) */
#	define GB_FIFO_SIZE1_SC_HIGHWATER_BFIFO_SHIFT 6
#	define GB_FIFO_SIZE1_SC_HIGHWATER_BFIFO_MASK  0x00000fc0
/* High water mark for RS colors' fifo */
#	define GB_FIFO_SIZE1_SC_HIGHWATER_COL_SHIFT   12
#	define GB_FIFO_SIZE1_SC_HIGHWATER_COL_MASK    0x0003f000
/* High water mark for RS textures' fifo */
#	define GB_FIFO_SIZE1_SC_HIGHWATER_TEX_SHIFT   18
#	define GB_FIFO_SIZE1_SC_HIGHWATER_TEX_MASK    0x00fc0000

/* This table specifies the source location and format for up to 16 texture
 * addresses (i[0]:i[15]) and four colors (c[0]:c[3])
 */
#define R500_RS_IP_0					0x4074
#define R500_RS_IP_1					0x4078
#define R500_RS_IP_2					0x407C
#define R500_RS_IP_3					0x4080
#define R500_RS_IP_4					0x4084
#define R500_RS_IP_5					0x4088
#define R500_RS_IP_6					0x408C
#define R500_RS_IP_7					0x4090
#define R500_RS_IP_8					0x4094
#define R500_RS_IP_9					0x4098
#define R500_RS_IP_10					0x409C
#define R500_RS_IP_11					0x40A0
#define R500_RS_IP_12					0x40A4
#define R500_RS_IP_13					0x40A8
#define R500_RS_IP_14					0x40AC
#define R500_RS_IP_15					0x40B0
#define R500_RS_IP_TEX_PTR_S_SHIFT 			0
#define R500_RS_IP_TEX_PTR_T_SHIFT 			6
#define R500_RS_IP_TEX_PTR_R_SHIFT 			12
#define R500_RS_IP_TEX_PTR_Q_SHIFT 			18
#define R500_RS_IP_COL_PTR_SHIFT 			24
#define R500_RS_IP_COL_FMT_SHIFT 			27
#define R500_RS_IP_COL_FMT_RGBA 			(0 << 27)
#define R500_RS_IP_COL_FMT_RGB0 			(1 << 27)
#define R500_RS_IP_COL_FMT_RGB1 			(2 << 27)
/* gap */
#define R500_RS_IP_COL_FMT_000A 			(4 << 27)
#define R500_RS_IP_COL_FMT_0000 			(5 << 27)
#define R500_RS_IP_COL_FMT_0001 			(6 << 27)
/* gap */
#define R500_RS_IP_COL_FMT_111A 			(8 << 27)
#define R500_RS_IP_COL_FMT_1110 			(9 << 27)
#define R500_RS_IP_COL_FMT_1111 			(10 << 27)
/* gap */
#define R500_RS_IP_OFFSET_DIS 				(0 << 31)
#define R500_RS_IP_OFFSET_EN 				(1 << 31)

/* gap */

/* Zero to flush caches. */
#define R300_TX_CNTL                        0x4100
#define R300_TX_FLUSH                       0x0

/* The upper enable bits are guessed, based on fglrx reported limits. */
#define R300_TX_ENABLE                      0x4104
#       define R300_TX_ENABLE_0                  (1 << 0)
#       define R300_TX_ENABLE_1                  (1 << 1)
#       define R300_TX_ENABLE_2                  (1 << 2)
#       define R300_TX_ENABLE_3                  (1 << 3)
#       define R300_TX_ENABLE_4                  (1 << 4)
#       define R300_TX_ENABLE_5                  (1 << 5)
#       define R300_TX_ENABLE_6                  (1 << 6)
#       define R300_TX_ENABLE_7                  (1 << 7)
#       define R300_TX_ENABLE_8                  (1 << 8)
#       define R300_TX_ENABLE_9                  (1 << 9)
#       define R300_TX_ENABLE_10                 (1 << 10)
#       define R300_TX_ENABLE_11                 (1 << 11)
#       define R300_TX_ENABLE_12                 (1 << 12)
#       define R300_TX_ENABLE_13                 (1 << 13)
#       define R300_TX_ENABLE_14                 (1 << 14)
#       define R300_TX_ENABLE_15                 (1 << 15)

#define R500_TX_FILTER_4		    0x4110
#	define R500_TX_WEIGHT_1_SHIFT            (0)
#	define R500_TX_WEIGHT_0_SHIFT            (11)
#	define R500_TX_WEIGHT_PAIR               (1<<22)
#	define R500_TX_PHASE_SHIFT               (23)
#	define R500_TX_DIRECTION_HORIZONTAL	 (0<<27)
#	define R500_TX_DIRECTION_VERITCAL	 (1<<27)

/* S Texture Coordinate of Vertex 0 for Point texture stuffing (LLC) */
#define GA_POINT_S0                              0x4200

/* T Texture Coordinate of Vertex 0 for Point texture stuffing (LLC) */
#define GA_POINT_T0                              0x4204

/* S Texture Coordinate of Vertex 2 for Point texture stuffing (URC) */
#define GA_POINT_S1                              0x4208

/* T Texture Coordinate of Vertex 2 for Point texture stuffing (URC) */
#define GA_POINT_T1                              0x420c

/* Specifies amount to shift integer position of vertex (screen space) before
 * converting to float for triangle stipple.
 */
#define GA_TRIANGLE_STIPPLE            0x4214
#	define GA_TRIANGLE_STIPPLE_X_SHIFT_SHIFT 0
#	define GA_TRIANGLE_STIPPLE_X_SHIFT_MASK  0x0000000f
#	define GA_TRIANGLE_STIPPLE_Y_SHIFT_SHIFT 16
#	define GA_TRIANGLE_STIPPLE_Y_SHIFT_MASK  0x000f0000

/* The pointsize is given in multiples of 6. The pointsize can be enormous:
 * Clear() renders a single point that fills the entire framebuffer.
 * 1/2 Height of point; fixed (16.0), subpixel format (1/12 or 1/16, even if in
 * 8b precision).
 */
#define R300_GA_POINT_SIZE                   0x421C
#       define R300_POINTSIZE_Y_SHIFT         0
#       define R300_POINTSIZE_Y_MASK          0x0000ffff
#       define R300_POINTSIZE_X_SHIFT         16
#       define R300_POINTSIZE_X_MASK          0xffff0000
#       define R300_POINTSIZE_MAX             (R300_POINTSIZE_Y_MASK / 6)

/* Blue fill color */
#define GA_FILL_R                                0x4220

/* Blue fill color */
#define GA_FILL_G                                0x4224

/* Blue fill color */
#define GA_FILL_B                                0x4228

/* Alpha fill color */
#define GA_FILL_A                                0x422c


/* Specifies maximum and minimum point & sprite sizes for per vertex size
 * specification. The lower part (15:0) is MIN and (31:16) is max.
 */
#define R300_GA_POINT_MINMAX                0x4230
#       define R300_GA_POINT_MINMAX_MIN_SHIFT          0
#       define R300_GA_POINT_MINMAX_MIN_MASK           (0xFFFF << 0)
#       define R300_GA_POINT_MINMAX_MAX_SHIFT          16
#       define R300_GA_POINT_MINMAX_MAX_MASK           (0xFFFF << 16)

/* 1/2 width of line, in subpixels (1/12 or 1/16 only, even in 8b
 * subprecision); (16.0) fixed format.
 *
 * The line width is given in multiples of 6.
 * In default mode lines are classified as vertical lines.
 * HO: horizontal
 * VE: vertical or horizontal
 * HO & VE: no classification
 */
#define GA_LINE_CNTL                             0x4234
#       define GA_LINE_CNTL_WIDTH_SHIFT       0
#       define GA_LINE_CNTL_WIDTH_MASK        0x0000ffff
#	define GA_LINE_CNTL_END_TYPE_HOR      (0 << 16)
#	define GA_LINE_CNTL_END_TYPE_VER      (1 << 16)
#	define GA_LINE_CNTL_END_TYPE_SQR      (2 << 16) /* horizontal or vertical depending upon slope */
#	define GA_LINE_CNTL_END_TYPE_COMP     (3 << 16) /* Computed (perpendicular to slope) */
#	define GA_LINE_CNTL_SORT_NO           (0 << 18)
#	define GA_LINE_CNTL_SORT_MINX_MINY    (1 << 18)
/** TODO: looks wrong */
#       define R300_LINESIZE_MAX              (GA_LINE_CNTL_WIDTH_MASK / 6)
/** TODO: looks wrong */
#       define R300_LINE_CNT_HO               (1 << 16)
/** TODO: looks wrong */
#       define R300_LINE_CNT_VE               (1 << 17)

/* Line Stipple configuration information. */
#define GA_LINE_STIPPLE_CONFIG                   0x4238
#	define GA_LINE_STIPPLE_CONFIG_LINE_RESET_NO     (0 << 0)
#	define GA_LINE_STIPPLE_CONFIG_LINE_RESET_LINE   (1 << 0)
#	define GA_LINE_STIPPLE_CONFIG_LINE_RESET_PACKET (2 << 0)
#	define GA_LINE_STIPPLE_CONFIG_STIPPLE_SCALE_SHIFT 2
#	define GA_LINE_STIPPLE_CONFIG_STIPPLE_SCALE_MASK  0xfffffffc

/* Used to load US instructions and constants */
#define R500_GA_US_VECTOR_INDEX               0x4250
#	define GA_US_VECTOR_INDEX_SHIFT       0
#	define GA_US_VECTOR_INDEX_MASK        0x000000ff
#	define GA_US_VECTOR_INDEX_TYPE_INSTR  (0 << 16)
#	define GA_US_VECTOR_INDEX_TYPE_CONST  (1 << 16)
#	define GA_US_VECTOR_INDEX_CLAMP_NO    (0 << 17)
#	define GA_US_VECTOR_INDEX_CLAMP_CONST (1 << 17)

/* Data register for loading US instructions and constants */
#define R500_GA_US_VECTOR_DATA                0x4254

/* Specifies color properties and mappings of textures. */
#define GA_COLOR_CONTROL_PS3                     0x4258
#	define TEX0_SHADING_PS3_SOLID       (0 << 0)
#	define TEX0_SHADING_PS3_FLAT        (1 << 0)
#	define TEX0_SHADING_PS3_GOURAUD     (2 << 0)
#	define TEX1_SHADING_PS3_SOLID       (0 << 2)
#	define TEX1_SHADING_PS3_FLAT        (1 << 2)
#	define TEX1_SHADING_PS3_GOURAUD     (2 << 2)
#	define TEX2_SHADING_PS3_SOLID       (0 << 4)
#	define TEX2_SHADING_PS3_FLAT        (1 << 4)
#	define TEX2_SHADING_PS3_GOURAUD     (2 << 4)
#	define TEX3_SHADING_PS3_SOLID       (0 << 6)
#	define TEX3_SHADING_PS3_FLAT        (1 << 6)
#	define TEX3_SHADING_PS3_GOURAUD     (2 << 6)
#	define TEX4_SHADING_PS3_SOLID       (0 << 8)
#	define TEX4_SHADING_PS3_FLAT        (1 << 8)
#	define TEX4_SHADING_PS3_GOURAUD     (2 << 8)
#	define TEX5_SHADING_PS3_SOLID       (0 << 10)
#	define TEX5_SHADING_PS3_FLAT        (1 << 10)
#	define TEX5_SHADING_PS3_GOURAUD     (2 << 10)
#	define TEX6_SHADING_PS3_SOLID       (0 << 12)
#	define TEX6_SHADING_PS3_FLAT        (1 << 12)
#	define TEX6_SHADING_PS3_GOURAUD     (2 << 12)
#	define TEX7_SHADING_PS3_SOLID       (0 << 14)
#	define TEX7_SHADING_PS3_FLAT        (1 << 14)
#	define TEX7_SHADING_PS3_GOURAUD     (2 << 14)
#	define TEX8_SHADING_PS3_SOLID       (0 << 16)
#	define TEX8_SHADING_PS3_FLAT        (1 << 16)
#	define TEX8_SHADING_PS3_GOURAUD     (2 << 16)
#	define TEX9_SHADING_PS3_SOLID       (0 << 18)
#	define TEX9_SHADING_PS3_FLAT        (1 << 18)
#	define TEX9_SHADING_PS3_GOURAUD     (2 << 18)
#	define TEX10_SHADING_PS3_SOLID      (0 << 20)
#	define TEX10_SHADING_PS3_FLAT       (1 << 20)
#	define TEX10_SHADING_PS3_GOURAUD    (2 << 20)
#	define COLOR0_TEX_OVERRIDE_NO       (0 << 22)
#	define COLOR0_TEX_OVERRIDE_TEX_0    (1 << 22)
#	define COLOR0_TEX_OVERRIDE_TEX_1    (2 << 22)
#	define COLOR0_TEX_OVERRIDE_TEX_2    (3 << 22)
#	define COLOR0_TEX_OVERRIDE_TEX_3    (4 << 22)
#	define COLOR0_TEX_OVERRIDE_TEX_4    (5 << 22)
#	define COLOR0_TEX_OVERRIDE_TEX_5    (6 << 22)
#	define COLOR0_TEX_OVERRIDE_TEX_6    (7 << 22)
#	define COLOR0_TEX_OVERRIDE_TEX_7    (8 << 22)
#	define COLOR0_TEX_OVERRIDE_TEX_8_C2 (9 << 22)
#	define COLOR0_TEX_OVERRIDE_TEX_9_C3 (10 << 22)
#	define COLOR1_TEX_OVERRIDE_NO       (0 << 26)
#	define COLOR1_TEX_OVERRIDE_TEX_0    (1 << 26)
#	define COLOR1_TEX_OVERRIDE_TEX_1    (2 << 26)
#	define COLOR1_TEX_OVERRIDE_TEX_2    (3 << 26)
#	define COLOR1_TEX_OVERRIDE_TEX_3    (4 << 26)
#	define COLOR1_TEX_OVERRIDE_TEX_4    (5 << 26)
#	define COLOR1_TEX_OVERRIDE_TEX_5    (6 << 26)
#	define COLOR1_TEX_OVERRIDE_TEX_6    (7 << 26)
#	define COLOR1_TEX_OVERRIDE_TEX_7    (8 << 26)
#	define COLOR1_TEX_OVERRIDE_TEX_8_C2 (9 << 26)
#	define COLOR1_TEX_OVERRIDE_TEX_9_C3 (10 << 26)

/* Returns idle status of various G3D block, captured when GA_IDLE written or
 * when hard or soft reset asserted.
 */
#define GA_IDLE                                  0x425c
#	define GA_IDLE_PIPE3_Z_IDLE  (0 << 0)
#	define GA_IDLE_PIPE2_Z_IDLE  (0 << 1)
#	define GA_IDLE_PIPE3_CD_IDLE (0 << 2)
#	define GA_IDLE_PIPE2_CD_IDLE (0 << 3)
#	define GA_IDLE_PIPE3_FG_IDLE (0 << 4)
#	define GA_IDLE_PIPE2_FG_IDLE (0 << 5)
#	define GA_IDLE_PIPE3_US_IDLE (0 << 6)
#	define GA_IDLE_PIPE2_US_IDLE (0 << 7)
#	define GA_IDLE_PIPE3_SC_IDLE (0 << 8)
#	define GA_IDLE_PIPE2_SC_IDLE (0 << 9)
#	define GA_IDLE_PIPE3_RS_IDLE (0 << 10)
#	define GA_IDLE_PIPE2_RS_IDLE (0 << 11)
#	define GA_IDLE_PIPE1_Z_IDLE  (0 << 12)
#	define GA_IDLE_PIPE0_Z_IDLE  (0 << 13)
#	define GA_IDLE_PIPE1_CD_IDLE (0 << 14)
#	define GA_IDLE_PIPE0_CD_IDLE (0 << 15)
#	define GA_IDLE_PIPE1_FG_IDLE (0 << 16)
#	define GA_IDLE_PIPE0_FG_IDLE (0 << 17)
#	define GA_IDLE_PIPE1_US_IDLE (0 << 18)
#	define GA_IDLE_PIPE0_US_IDLE (0 << 19)
#	define GA_IDLE_PIPE1_SC_IDLE (0 << 20)
#	define GA_IDLE_PIPE0_SC_IDLE (0 << 21)
#	define GA_IDLE_PIPE1_RS_IDLE (0 << 22)
#	define GA_IDLE_PIPE0_RS_IDLE (0 << 23)
#	define GA_IDLE_SU_IDLE       (0 << 24)
#	define GA_IDLE_GA_IDLE       (0 << 25)
#	define GA_IDLE_GA_UNIT2_IDLE (0 << 26)

/* Current value of stipple accumulator. */
#define R300_GA_LINE_STIPPLE_VALUE            0x4260

/* S Texture Coordinate Value for Vertex 0 of Line (stuff textures -- i.e. AA) */
#define GA_LINE_S0                               0x4264
/* S Texture Coordinate Value for Vertex 1 of Lines (V2 of parallelogram -- stuff textures -- i.e. AA) */
#define GA_LINE_S1                               0x4268

/* GA Input fifo high water marks */
#define GA_FIFO_CNTL                             0x4270
#	define GA_FIFO_CNTL_VERTEX_FIFO_MASK   0x00000007
#	define GA_FIFO_CNTL_VERTEX_FIFO_SHIFT  0
#	define GA_FIFO_CNTL_VERTEX_INDEX_MASK  0x00000038
#	define GA_FIFO_CNTL_VERTEX_INDEX_SHIFT 3
#	define GA_FIFO_CNTL_VERTEX_REG_MASK    0x00003fc0
#	define GA_FIFO_CNTL_VERTEX_REG_SHIFT   6

/* Something shade related */
#define GA_ENHANCE                               0x4274
#	define GA_ENHANCE_DEADLOCK_CNTL_NO_EFFECT   (0 << 0)
#	define GA_ENHANCE_DEADLOCK_CNTL_PREVENT_TCL (1 << 0) /* Prevents TCL interface from deadlocking on GA side. */
#	define GA_ENHANCE_FASTSYNC_CNTL_NO_EFFECT   (0 << 1)
#	define GA_ENHANCE_FASTSYNC_CNTL_ENABLE      (1 << 1) /* Enables high-performance register/primitive switching. */
#	define GA_ENHANCE_REG_READWRITE_NO_EFFECT   (0 << 2) /* R520+ only */
#	define GA_ENHANCE_REG_READWRITE_ENABLE      (1 << 2) /* R520+ only, Enables GA support of simultaneous register reads and writes. */
#	define GA_ENHANCE_REG_NOSTALL_NO_EFFECT     (0 << 3)
#	define GA_ENHANCE_REG_NOSTALL_ENABLE        (1 << 3) /* Enables GA support of no-stall reads for register read back. */

#define R300_GA_COLOR_CONTROL                   0x4278
#	define R300_GA_COLOR_CONTROL_RGB0_SHADING_SOLID      (0 << 0)
#	define R300_GA_COLOR_CONTROL_RGB0_SHADING_FLAT       (1 << 0)
#	define R300_GA_COLOR_CONTROL_RGB0_SHADING_GOURAUD    (2 << 0)
#	define R300_GA_COLOR_CONTROL_ALPHA0_SHADING_SOLID    (0 << 2)
#	define R300_GA_COLOR_CONTROL_ALPHA0_SHADING_FLAT     (1 << 2)
#	define R300_GA_COLOR_CONTROL_ALPHA0_SHADING_GOURAUD  (2 << 2)
#	define R300_GA_COLOR_CONTROL_RGB1_SHADING_SOLID      (0 << 4)
#	define R300_GA_COLOR_CONTROL_RGB1_SHADING_FLAT       (1 << 4)
#	define R300_GA_COLOR_CONTROL_RGB1_SHADING_GOURAUD    (2 << 4)
#	define R300_GA_COLOR_CONTROL_ALPHA1_SHADING_SOLID    (0 << 6)
#	define R300_GA_COLOR_CONTROL_ALPHA1_SHADING_FLAT     (1 << 6)
#	define R300_GA_COLOR_CONTROL_ALPHA1_SHADING_GOURAUD  (2 << 6)
#	define R300_GA_COLOR_CONTROL_RGB2_SHADING_SOLID      (0 << 8)
#	define R300_GA_COLOR_CONTROL_RGB2_SHADING_FLAT       (1 << 8)
#	define R300_GA_COLOR_CONTROL_RGB2_SHADING_GOURAUD    (2 << 8)
#	define R300_GA_COLOR_CONTROL_ALPHA2_SHADING_SOLID    (0 << 10)
#	define R300_GA_COLOR_CONTROL_ALPHA2_SHADING_FLAT     (1 << 10)
#	define R300_GA_COLOR_CONTROL_ALPHA2_SHADING_GOURAUD  (2 << 10)
#	define R300_GA_COLOR_CONTROL_RGB3_SHADING_SOLID      (0 << 12)
#	define R300_GA_COLOR_CONTROL_RGB3_SHADING_FLAT       (1 << 12)
#	define R300_GA_COLOR_CONTROL_RGB3_SHADING_GOURAUD    (2 << 12)
#	define R300_GA_COLOR_CONTROL_ALPHA3_SHADING_SOLID    (0 << 14)
#	define R300_GA_COLOR_CONTROL_ALPHA3_SHADING_FLAT     (1 << 14)
#	define R300_GA_COLOR_CONTROL_ALPHA3_SHADING_GOURAUD  (2 << 14)
#	define R300_GA_COLOR_CONTROL_PROVOKING_VERTEX_FIRST  (0 << 16)
#	define R300_GA_COLOR_CONTROL_PROVOKING_VERTEX_SECOND (1 << 16)
#	define R300_GA_COLOR_CONTROL_PROVOKING_VERTEX_THIRD  (2 << 16)
#	define R300_GA_COLOR_CONTROL_PROVOKING_VERTEX_LAST   (3 << 16)

/** TODO: might be candidate for removal */
#	define R300_RE_SHADE_MODEL_SMOOTH     ( \
	R300_GA_COLOR_CONTROL_RGB0_SHADING_GOURAUD | R300_GA_COLOR_CONTROL_ALPHA0_SHADING_GOURAUD | \
	R300_GA_COLOR_CONTROL_RGB1_SHADING_GOURAUD | R300_GA_COLOR_CONTROL_ALPHA1_SHADING_GOURAUD | \
	R300_GA_COLOR_CONTROL_RGB2_SHADING_GOURAUD | R300_GA_COLOR_CONTROL_ALPHA2_SHADING_GOURAUD | \
	R300_GA_COLOR_CONTROL_RGB3_SHADING_GOURAUD | R300_GA_COLOR_CONTROL_ALPHA3_SHADING_GOURAUD | \
	R300_GA_COLOR_CONTROL_PROVOKING_VERTEX_LAST )
/** TODO: might be candidate for removal, the GOURAUD stuff also looks buggy to me */
#	define R300_RE_SHADE_MODEL_FLAT     ( \
	R300_GA_COLOR_CONTROL_RGB0_SHADING_FLAT | R300_GA_COLOR_CONTROL_ALPHA0_SHADING_FLAT | \
	R300_GA_COLOR_CONTROL_RGB1_SHADING_FLAT | R300_GA_COLOR_CONTROL_ALPHA1_SHADING_GOURAUD | \
	R300_GA_COLOR_CONTROL_RGB2_SHADING_FLAT | R300_GA_COLOR_CONTROL_ALPHA2_SHADING_FLAT | \
	R300_GA_COLOR_CONTROL_RGB3_SHADING_FLAT | R300_GA_COLOR_CONTROL_ALPHA3_SHADING_GOURAUD | \
	R300_GA_COLOR_CONTROL_PROVOKING_VERTEX_LAST )

/* Specifies red & green components of fill color -- S312 format -- Backwards comp. */
#define R300_GA_SOLID_RG                         0x427c
#	define GA_SOLID_RG_COLOR_GREEN_SHIFT 0
#	define GA_SOLID_RG_COLOR_GREEN_MASK  0x0000ffff
#	define GA_SOLID_RG_COLOR_RED_SHIFT   16
#	define GA_SOLID_RG_COLOR_RED_MASK    0xffff0000
/* Specifies blue & alpha components of fill color -- S312 format -- Backwards comp. */
#define R300_GA_SOLID_BA                         0x4280
#	define GA_SOLID_BA_COLOR_ALPHA_SHIFT 0
#	define GA_SOLID_BA_COLOR_ALPHA_MASK  0x0000ffff
#	define GA_SOLID_BA_COLOR_BLUE_SHIFT  16
#	define GA_SOLID_BA_COLOR_BLUE_MASK   0xffff0000

/* Polygon Mode
 * Dangerous
 */
#define GA_POLY_MODE                             0x4288
#	define GA_POLY_MODE_DISABLE           (0 << 0)
#	define GA_POLY_MODE_DUAL              (1 << 0) /* send 2 sets of 3 polys with specified poly type */
/* reserved */
#	define GA_POLY_MODE_FRONT_PTYPE_POINT (0 << 4)
#	define GA_POLY_MODE_FRONT_PTYPE_LINE  (1 << 4)
#	define GA_POLY_MODE_FRONT_PTYPE_TRI   (2 << 4)
/* reserved */
#	define GA_POLY_MODE_BACK_PTYPE_POINT  (0 << 7)
#	define GA_POLY_MODE_BACK_PTYPE_LINE   (1 << 7)
#	define GA_POLY_MODE_BACK_PTYPE_TRI    (2 << 7)
/* reserved */

/* Specifies the rouding mode for geometry & color SPFP to FP conversions. */
#define GA_ROUND_MODE                            0x428c
#	define GA_ROUND_MODE_GEOMETRY_ROUND_TRUNC   (0 << 0)
#	define GA_ROUND_MODE_GEOMETRY_ROUND_NEAREST (1 << 0)
#	define GA_ROUND_MODE_COLOR_ROUND_TRUNC      (0 << 2)
#	define GA_ROUND_MODE_COLOR_ROUND_NEAREST    (1 << 2)
#	define GA_ROUND_MODE_RGB_CLAMP_RGB          (0 << 4)
#	define GA_ROUND_MODE_RGB_CLAMP_FP20         (1 << 4)
#	define GA_ROUND_MODE_ALPHA_CLAMP_RGB        (0 << 5)
#	define GA_ROUND_MODE_ALPHA_CLAMP_FP20       (1 << 5)
#	define GA_ROUND_MODE_GEOMETRY_MASK_SHIFT    6
#	define GA_ROUND_MODE_GEOMETRY_MASK_MASK     0x000003c0

/* Specifies x & y offsets for vertex data after conversion to FP.
 * Offsets are in S15 format (subpixels -- 1/12 or 1/16, even in 8b
 * subprecision).
 */
#define GA_OFFSET                                0x4290
#	define GA_OFFSET_X_OFFSET_SHIFT 0
#	define GA_OFFSET_X_OFFSET_MASK  0x0000ffff
#	define GA_OFFSET_Y_OFFSET_SHIFT 16
#	define GA_OFFSET_Y_OFFSET_MASK  0xffff0000

/* Specifies the scale to apply to fog. */
#define R300_RE_FOG_SCALE                     0x4294
/* Specifies the offset to apply to fog. */
#define R300_RE_FOG_START                     0x4298

/* Not sure why there are duplicate of factor and constant values.
 * My best guess so far is that there are seperate zbiases for test and write.
 * Ordering might be wrong.
 * Some of the tests indicate that fgl has a fallback implementation of zbias
 * via pixel shaders.
 */
#define R300_RE_ZBIAS_CNTL                    0x42A0 /* GUESS */
#define R300_RE_ZBIAS_T_FACTOR                0x42A4
#define R300_RE_ZBIAS_T_CONSTANT              0x42A8
#define R300_RE_ZBIAS_W_FACTOR                0x42AC
#define R300_RE_ZBIAS_W_CONSTANT              0x42B0

/* This register needs to be set to (1<<1) for RV350 to correctly
 * perform depth test (see --vb-triangles in r300_demo)
 * Don't know about other chips. - Vladimir
 * This is set to 3 when GL_POLYGON_OFFSET_FILL is on.
 * My guess is that there are two bits for each zbias primitive
 * (FILL, LINE, POINT).
 *  One to enable depth test and one for depth write.
 * Yet this doesnt explain why depth writes work ...
 */
#define R300_RE_OCCLUSION_CNTL		    0x42B4
#	define R300_OCCLUSION_ON		(1<<1)

#define R300_RE_CULL_CNTL                   0x42B8
#       define R300_CULL_FRONT                   (1 << 0)
#       define R300_CULL_BACK                    (1 << 1)
#       define R300_FRONT_FACE_CCW               (0 << 2)
#       define R300_FRONT_FACE_CW                (1 << 2)

/* SU Depth Scale value */
#define R300_SU_DEPTH_SCALE                 0x42c0
/* SU Depth Offset value */
#define R300_SU_DEPTH_OFFSET                0x42c4


/* BEGIN: Rasterization / Interpolators - many guesses */

/*
 * TC_CNT is the number of incoming texture coordinate sets (i.e. it depends
 * on the vertex program, *not* the fragment program)
 */
#define R300_RS_COUNT                      0x4300
#       define R300_IT_COUNT_SHIFT               0
#       define R300_IT_COUNT_MASK                0x0000007f
#       define R300_IC_COUNT_SHIFT               7
#       define R300_IC_COUNT_MASK                0x00000780
#       define R300_W_ADDR_SHIFT                 12
#       define R300_W_ADDR_MASK                  0x0003f000
#       define R300_HIRES_DIS                    (0 << 18)
#       define R300_HIRES_EN                     (1 << 18)

#define R300_RS_INST_COUNT                       0x4304
#       define R300_RS_INST_COUNT_SHIFT          0
#       define R300_RS_INST_COUNT_MASK           0x0000000f
#       define R300_RS_TX_OFFSET_SHIFT           5
#	define R300_RS_TX_OFFSET_MASK            0x000000e0

/* gap */

/* Only used for texture coordinates.
 * Use the source field to route texture coordinate input from the
 * vertex program to the desired interpolator. Note that the source
 * field is relative to the outputs the vertex program *actually*
 * writes. If a vertex program only writes texcoord[1], this will
 * be source index 0.
 * Set INTERP_USED on all interpolators that produce data used by
 * the fragment program. INTERP_USED looks like a swizzling mask,
 * but I haven't seen it used that way.
 *
 * Note: The _UNKNOWN constants are always set in their respective
 * register. I don't know if this is necessary.
 */
#define R300_RS_IP_0				        0x4310
#define R300_RS_IP_1				        0x4314
#define R300_RS_IP_2				        0x4318
#define R300_RS_IP_3				        0x431C
#       define R300_RS_INTERP_SRC_SHIFT          2 /* TODO: check for removal */
#       define R300_RS_INTERP_SRC_MASK           (7 << 2) /* TODO: check for removal */
#	define R300_RS_TEX_PTR(x)		        (x << 0)
#	define R300_RS_COL_PTR(x)		        (x << 6)
#	define R300_RS_COL_FMT(x)		        (x << 9)
#	define R300_RS_COL_FMT_RGBA		        0
#	define R300_RS_COL_FMT_RGB0		        2
#	define R300_RS_COL_FMT_RGB1		        3
#	define R300_RS_COL_FMT_000A		        4
#	define R300_RS_COL_FMT_0000		        5
#	define R300_RS_COL_FMT_0001		        6
#	define R300_RS_COL_FMT_111A		        8
#	define R300_RS_COL_FMT_1110		        9
#	define R300_RS_COL_FMT_1111		        10
#	define R300_RS_SEL_S(x)		                (x << 13)
#	define R300_RS_SEL_T(x)		                (x << 16)
#	define R300_RS_SEL_R(x)		                (x << 19)
#	define R300_RS_SEL_Q(x)		                (x << 22)
#	define R300_RS_SEL_C0		                0
#	define R300_RS_SEL_C1		                1
#	define R300_RS_SEL_C2		                2
#	define R300_RS_SEL_C3		                3
#	define R300_RS_SEL_K0		                4
#	define R300_RS_SEL_K1		                5


/*  */
#define R500_RS_INST_0					0x4320
#define R500_RS_INST_1					0x4324
#define R500_RS_INST_2					0x4328
#define R500_RS_INST_3					0x432c
#define R500_RS_INST_4					0x4330
#define R500_RS_INST_5					0x4334
#define R500_RS_INST_6					0x4338
#define R500_RS_INST_7					0x433c
#define R500_RS_INST_8					0x4340
#define R500_RS_INST_9					0x4344
#define R500_RS_INST_10					0x4348
#define R500_RS_INST_11					0x434c
#define R500_RS_INST_12					0x4350
#define R500_RS_INST_13					0x4354
#define R500_RS_INST_14					0x4358
#define R500_RS_INST_15					0x435c
#define R500_RS_INST_TEX_ID_SHIFT			0
#define R500_RS_INST_TEX_CN_WRITE			(1 << 4)
#define R500_RS_INST_TEX_ADDR_SHIFT			5
#define R500_RS_INST_COL_ID_SHIFT			12
#define R500_RS_INST_COL_CN_NO_WRITE			(0 << 16)
#define R500_RS_INST_COL_CN_WRITE			(1 << 16)
#define R500_RS_INST_COL_CN_WRITE_FBUFFER		(2 << 16)
#define R500_RS_INST_COL_CN_WRITE_BACKFACE		(3 << 16)
#define R500_RS_INST_COL_COL_ADDR_SHIFT			18
#define R500_RS_INST_TEX_ADJ				(1 << 25)
#define R500_RS_INST_W_CN				(1 << 26)

/* These DWORDs control how vertex data is routed into fragment program
 * registers, after interpolators.
 */
#define R300_RS_ROUTE_0                     0x4330
#define R300_RS_ROUTE_1                     0x4334
#define R300_RS_ROUTE_2                     0x4338
#define R300_RS_ROUTE_3                     0x433C /* GUESS */
#define R300_RS_ROUTE_4                     0x4340 /* GUESS */
#define R300_RS_ROUTE_5                     0x4344 /* GUESS */
#define R300_RS_ROUTE_6                     0x4348 /* GUESS */
#define R300_RS_ROUTE_7                     0x434C /* GUESS */
#       define R300_RS_ROUTE_SOURCE_INTERP_0     0
#       define R300_RS_ROUTE_SOURCE_INTERP_1     1
#       define R300_RS_ROUTE_SOURCE_INTERP_2     2
#       define R300_RS_ROUTE_SOURCE_INTERP_3     3
#       define R300_RS_ROUTE_SOURCE_INTERP_4     4
#       define R300_RS_ROUTE_SOURCE_INTERP_5     5 /* GUESS */
#       define R300_RS_ROUTE_SOURCE_INTERP_6     6 /* GUESS */
#       define R300_RS_ROUTE_SOURCE_INTERP_7     7 /* GUESS */
#       define R300_RS_ROUTE_ENABLE              (1 << 3) /* GUESS */
#       define R300_RS_ROUTE_DEST_SHIFT          6
#       define R300_RS_ROUTE_DEST_MASK           (31 << 6) /* GUESS */

/* Special handling for color: When the fragment program uses color,
 * the ROUTE_0_COLOR bit is set and ROUTE_0_COLOR_DEST contains the
 * color register index.
 *
 * Apperently you may set the R300_RS_ROUTE_0_COLOR bit, but not provide any
 * R300_RS_ROUTE_0_COLOR_DEST value; this setup is used for clearing the state.
 * See r300_ioctl.c:r300EmitClearState. I'm not sure if this setup is strictly
 * correct or not. - Oliver.
 */
#       define R300_RS_ROUTE_0_COLOR             (1 << 14)
#       define R300_RS_ROUTE_0_COLOR_DEST_SHIFT  17
#       define R300_RS_ROUTE_0_COLOR_DEST_MASK   (31 << 17) /* GUESS */
/* As above, but for secondary color */
#		define R300_RS_ROUTE_1_COLOR1            (1 << 14)
#		define R300_RS_ROUTE_1_COLOR1_DEST_SHIFT 17
#		define R300_RS_ROUTE_1_COLOR1_DEST_MASK  (31 << 17)
#		define R300_RS_ROUTE_1_UNKNOWN11         (1 << 11)
/* END: Rasterization / Interpolators - many guesses */

/* Hierarchical Z Enable */
#define R300_SC_HYPERZ                   0x43a4
#	define R300_SC_HYPERZ_DISABLE     (0 << 0)
#	define R300_SC_HYPERZ_ENABLE      (1 << 0)
#	define R300_SC_HYPERZ_MIN         (0 << 1)
#	define R300_SC_HYPERZ_MAX         (1 << 1)
#	define R300_SC_HYPERZ_ADJ_256     (0 << 2)
#	define R300_SC_HYPERZ_ADJ_128     (1 << 2)
#	define R300_SC_HYPERZ_ADJ_64      (2 << 2)
#	define R300_SC_HYPERZ_ADJ_32      (3 << 2)
#	define R300_SC_HYPERZ_ADJ_16      (4 << 2)
#	define R300_SC_HYPERZ_ADJ_8       (5 << 2)
#	define R300_SC_HYPERZ_ADJ_4       (6 << 2)
#	define R300_SC_HYPERZ_ADJ_2       (7 << 2)
#	define R300_SC_HYPERZ_HZ_Z0MIN_NO (0 << 5)
#	define R300_SC_HYPERZ_HZ_Z0MIN    (1 << 5)
#	define R300_SC_HYPERZ_HZ_Z0MAX_NO (0 << 6)
#	define R300_SC_HYPERZ_HZ_Z0MAX    (1 << 6)


/* BEGIN: Scissors and cliprects */

/* There are four clipping rectangles. Their corner coordinates are inclusive.
 * Every pixel is assigned a number from 0 and 15 by setting bits 0-3 depending
 * on whether the pixel is inside cliprects 0-3, respectively. For example,
 * if a pixel is inside cliprects 0 and 1, but outside 2 and 3, it is assigned
 * the number 3 (binary 0011).
 * Iff the bit corresponding to the pixel's number in RE_CLIPRECT_CNTL is set,
 * the pixel is rasterized.
 *
 * In addition to this, there is a scissors rectangle. Only pixels inside the
 * scissors rectangle are drawn. (coordinates are inclusive)
 *
 * For some reason, the top-left corner of the framebuffer is at (1440, 1440)
 * for the purpose of clipping and scissors.
 */
#define R300_RE_CLIPRECT_TL_0               0x43B0
#define R300_RE_CLIPRECT_BR_0               0x43B4
#define R300_RE_CLIPRECT_TL_1               0x43B8
#define R300_RE_CLIPRECT_BR_1               0x43BC
#define R300_RE_CLIPRECT_TL_2               0x43C0
#define R300_RE_CLIPRECT_BR_2               0x43C4
#define R300_RE_CLIPRECT_TL_3               0x43C8
#define R300_RE_CLIPRECT_BR_3               0x43CC
#       define R300_CLIPRECT_OFFSET              1440
#       define R300_CLIPRECT_MASK                0x1FFF
#       define R300_CLIPRECT_X_SHIFT             0
#       define R300_CLIPRECT_X_MASK              (0x1FFF << 0)
#       define R300_CLIPRECT_Y_SHIFT             13
#       define R300_CLIPRECT_Y_MASK              (0x1FFF << 13)
#define R300_RE_CLIPRECT_CNTL               0x43D0
#       define R300_CLIP_OUT                     (1 << 0)
#       define R300_CLIP_0                       (1 << 1)
#       define R300_CLIP_1                       (1 << 2)
#       define R300_CLIP_10                      (1 << 3)
#       define R300_CLIP_2                       (1 << 4)
#       define R300_CLIP_20                      (1 << 5)
#       define R300_CLIP_21                      (1 << 6)
#       define R300_CLIP_210                     (1 << 7)
#       define R300_CLIP_3                       (1 << 8)
#       define R300_CLIP_30                      (1 << 9)
#       define R300_CLIP_31                      (1 << 10)
#       define R300_CLIP_310                     (1 << 11)
#       define R300_CLIP_32                      (1 << 12)
#       define R300_CLIP_320                     (1 << 13)
#       define R300_CLIP_321                     (1 << 14)
#       define R300_CLIP_3210                    (1 << 15)

/* gap */

#define R300_RE_SCISSORS_TL                 0x43E0
#define R300_RE_SCISSORS_BR                 0x43E4
#       define R300_SCISSORS_OFFSET              1440
#       define R300_SCISSORS_X_SHIFT             0
#       define R300_SCISSORS_X_MASK              (0x1FFF << 0)
#       define R300_SCISSORS_Y_SHIFT             13
#       define R300_SCISSORS_Y_MASK              (0x1FFF << 13)

/* Screen door sample mask */
#define R300_SC_SCREENDOOR                 0x43e8

/* END: Scissors and cliprects */

/* BEGIN: Texture specification */

/*
 * The texture specification dwords are grouped by meaning and not by texture
 * unit. This means that e.g. the offset for texture image unit N is found in
 * register TX_OFFSET_0 + (4*N)
 */
#define R300_TX_FILTER0_0                        0x4400
#define R300_TX_FILTER0_1                        0x4404
#define R300_TX_FILTER0_2                        0x4408
#define R300_TX_FILTER0_3                        0x440c
#define R300_TX_FILTER0_4                        0x4410
#define R300_TX_FILTER0_5                        0x4414
#define R300_TX_FILTER0_6                        0x4418
#define R300_TX_FILTER0_7                        0x441c
#define R300_TX_FILTER0_8                        0x4420
#define R300_TX_FILTER0_9                        0x4424
#define R300_TX_FILTER0_10                       0x4428
#define R300_TX_FILTER0_11                       0x442c
#define R300_TX_FILTER0_12                       0x4430
#define R300_TX_FILTER0_13                       0x4434
#define R300_TX_FILTER0_14                       0x4438
#define R300_TX_FILTER0_15                       0x443c
#       define R300_TX_REPEAT                    0
#       define R300_TX_MIRRORED                  1
#       define R300_TX_CLAMP_TO_EDGE             2
#	define R300_TX_MIRROR_ONCE_TO_EDGE       3
#       define R300_TX_CLAMP                     4
#	define R300_TX_MIRROR_ONCE               5
#       define R300_TX_CLAMP_TO_BORDER           6
#	define R300_TX_MIRROR_ONCE_TO_BORDER     7
#       define R300_TX_WRAP_S_SHIFT              0
#       define R300_TX_WRAP_S_MASK               (7 << 0)
#       define R300_TX_WRAP_T_SHIFT              3
#       define R300_TX_WRAP_T_MASK               (7 << 3)
#       define R300_TX_WRAP_Q_SHIFT              6
#       define R300_TX_WRAP_Q_MASK               (7 << 6)
#	define R300_TX_MAG_FILTER_4              (0 << 9)
#       define R300_TX_MAG_FILTER_NEAREST        (1 << 9)
#       define R300_TX_MAG_FILTER_LINEAR         (2 << 9)
#       define R300_TX_MAG_FILTER_MASK           (3 << 9)
#       define R300_TX_MIN_FILTER_NEAREST        (1 << 11)
#       define R300_TX_MIN_FILTER_LINEAR         (2 << 11)
#	define R300_TX_MIN_FILTER_NEAREST_MIP_NEAREST       (5  <<  11) /* TODO: use spec */
#	define R300_TX_MIN_FILTER_NEAREST_MIP_LINEAR        (9  <<  11) /* TODO: use spec */
#	define R300_TX_MIN_FILTER_LINEAR_MIP_NEAREST        (6  <<  11) /* TODO: use spec */
#	define R300_TX_MIN_FILTER_LINEAR_MIP_LINEAR         (10 <<  11) /* TODO: use spec */

/* NOTE: NEAREST doesnt seem to exist.
 * Im not seting MAG_FILTER_MASK and (3 << 11) on for all
 * anisotropy modes because that would void selected mag filter
 */
#	define R300_TX_MIN_FILTER_ANISO_NEAREST             (0 << 13)
#	define R300_TX_MIN_FILTER_ANISO_LINEAR              (0 << 13)
#	define R300_TX_MIN_FILTER_ANISO_NEAREST_MIP_NEAREST (1 << 13)
#	define R300_TX_MIN_FILTER_ANISO_NEAREST_MIP_LINEAR  (2 << 13)
#       define R300_TX_MIN_FILTER_MASK   ( (15 << 11) | (3 << 13) )
#	define R300_TX_MAX_ANISO_1_TO_1  (0 << 21)
#	define R300_TX_MAX_ANISO_2_TO_1  (2 << 21)
#	define R300_TX_MAX_ANISO_4_TO_1  (4 << 21)
#	define R300_TX_MAX_ANISO_8_TO_1  (6 << 21)
#	define R300_TX_MAX_ANISO_16_TO_1 (8 << 21)
#	define R300_TX_MAX_ANISO_MASK    (14 << 21)

#define R300_TX_FILTER1_0                      0x4440
#	define R300_CHROMA_KEY_MODE_DISABLE    0
#	define R300_CHROMA_KEY_FORCE	       1
#	define R300_CHROMA_KEY_BLEND           2
#	define R300_MC_ROUND_NORMAL            (0<<2)
#	define R300_MC_ROUND_MPEG4             (1<<2)
#	define R300_LOD_BIAS_MASK	    0x1fff
#	define R300_EDGE_ANISO_EDGE_DIAG       (0<<13)
#	define R300_EDGE_ANISO_EDGE_ONLY       (1<<13)
#	define R300_MC_COORD_TRUNCATE_DISABLE  (0<<14)
#	define R300_MC_COORD_TRUNCATE_MPEG     (1<<14)
#	define R300_TX_TRI_PERF_0_8            (0<<15)
#	define R300_TX_TRI_PERF_1_8            (1<<15)
#	define R300_TX_TRI_PERF_1_4            (2<<15)
#	define R300_TX_TRI_PERF_3_8            (3<<15)
#	define R300_ANISO_THRESHOLD_MASK       (7<<17)

#	define R500_MACRO_SWITCH               (1<<22)
#	define R500_BORDER_FIX                 (1<<31)

#define R300_TX_SIZE_0                      0x4480
#       define R300_TX_WIDTHMASK_SHIFT           0
#       define R300_TX_WIDTHMASK_MASK            (2047 << 0)
#       define R300_TX_HEIGHTMASK_SHIFT          11
#       define R300_TX_HEIGHTMASK_MASK           (2047 << 11)
#	define R300_TX_DEPTHMASK_SHIFT		 22
#	define R300_TX_DEPTHMASK_MASK		 (0xf << 22)
#       define R300_TX_MAX_MIP_LEVEL_SHIFT       26
#       define R300_TX_MAX_MIP_LEVEL_MASK        (0xf << 26)
#       define R300_TX_SIZE_PROJECTED            (1<<30)
#       define R300_TX_SIZE_TXPITCH_EN           (1<<31)
#define R300_TX_FORMAT_0                    0x44C0
	/* The interpretation of the format word by Wladimir van der Laan */
	/* The X, Y, Z and W refer to the layout of the components.
	   They are given meanings as R, G, B and Alpha by the swizzle
	   specification */
#	define R300_TX_FORMAT_X8		    0x0
#	define R500_TX_FORMAT_X1		    0x0 // bit set in format 2 
#	define R300_TX_FORMAT_X16		    0x1
#	define R500_TX_FORMAT_X1_REV		    0x0 // bit set in format 2 
#	define R300_TX_FORMAT_Y4X4		    0x2
#	define R300_TX_FORMAT_Y8X8		    0x3
#	define R300_TX_FORMAT_Y16X16		    0x4
#	define R300_TX_FORMAT_Z3Y3X2		    0x5
#	define R300_TX_FORMAT_Z5Y6X5		    0x6
#	define R300_TX_FORMAT_Z6Y5X5		    0x7
#	define R300_TX_FORMAT_Z11Y11X10		    0x8
#	define R300_TX_FORMAT_Z10Y11X11		    0x9
#	define R300_TX_FORMAT_W4Z4Y4X4		    0xA
#	define R300_TX_FORMAT_W1Z5Y5X5		    0xB
#	define R300_TX_FORMAT_W8Z8Y8X8		    0xC
#	define R300_TX_FORMAT_W2Z10Y10X10	    0xD
#	define R300_TX_FORMAT_W16Z16Y16X16	    0xE
#	define R300_TX_FORMAT_DXT1	    	    0xF
#	define R300_TX_FORMAT_DXT3	    	    0x10
#	define R300_TX_FORMAT_DXT5	    	    0x11
#	define R300_TX_FORMAT_D3DMFT_CxV8U8	    0x12     /* no swizzle */
#	define R300_TX_FORMAT_A8R8G8B8	    	    0x13     /* no swizzle */
#	define R300_TX_FORMAT_B8G8_B8G8	    	    0x14     /* no swizzle */
#	define R300_TX_FORMAT_G8R8_G8B8	    	    0x15     /* no swizzle */

	/* These two values are wrong, but they're the only values that
	 * produce any even vaguely correct results.  Can r300 only do 16-bit
	 * depth textures?
	 */
#	define R300_TX_FORMAT_X24_Y8	    	    0x1e
#	define R300_TX_FORMAT_X32	    	    0x1e

	/* 0x16 - some 16 bit green format.. ?? */
#	define R300_TX_FORMAT_UNK25		   (1 << 25) /* no swizzle */
#	define R300_TX_FORMAT_CUBIC_MAP		   (1 << 26)

	/* gap */
	/* Floating point formats */
	/* Note - hardware supports both 16 and 32 bit floating point */
#	define R300_TX_FORMAT_FL_I16	    	    0x18
#	define R300_TX_FORMAT_FL_I16A16	    	    0x19
#	define R300_TX_FORMAT_FL_R16G16B16A16	    0x1A
#	define R300_TX_FORMAT_FL_I32	    	    0x1B
#	define R300_TX_FORMAT_FL_I32A32	    	    0x1C
#	define R300_TX_FORMAT_FL_R32G32B32A32	    0x1D
	/* alpha modes, convenience mostly */
	/* if you have alpha, pick constant appropriate to the
	   number of channels (1 for I8, 2 for I8A8, 4 for R8G8B8A8, etc */
# 	define R300_TX_FORMAT_ALPHA_1CH		    0x000
# 	define R300_TX_FORMAT_ALPHA_2CH		    0x200
# 	define R300_TX_FORMAT_ALPHA_4CH		    0x600
# 	define R300_TX_FORMAT_ALPHA_NONE	    0xA00
	/* Swizzling */
	/* constants */
#	define R300_TX_FORMAT_X		0
#	define R300_TX_FORMAT_Y		1
#	define R300_TX_FORMAT_Z		2
#	define R300_TX_FORMAT_W		3
#	define R300_TX_FORMAT_ZERO	4
#	define R300_TX_FORMAT_ONE	5
	/* 2.0*Z, everything above 1.0 is set to 0.0 */
#	define R300_TX_FORMAT_CUT_Z	6
	/* 2.0*W, everything above 1.0 is set to 0.0 */
#	define R300_TX_FORMAT_CUT_W	7

#	define R300_TX_FORMAT_B_SHIFT	18
#	define R300_TX_FORMAT_G_SHIFT	15
#	define R300_TX_FORMAT_R_SHIFT	12
#	define R300_TX_FORMAT_A_SHIFT	9
	/* Convenience macro to take care of layout and swizzling */
#	define R300_EASY_TX_FORMAT(B, G, R, A, FMT)	(		\
		((R300_TX_FORMAT_##B)<<R300_TX_FORMAT_B_SHIFT)		\
		| ((R300_TX_FORMAT_##G)<<R300_TX_FORMAT_G_SHIFT)	\
		| ((R300_TX_FORMAT_##R)<<R300_TX_FORMAT_R_SHIFT)	\
		| ((R300_TX_FORMAT_##A)<<R300_TX_FORMAT_A_SHIFT)	\
		| (R300_TX_FORMAT_##FMT)				\
		)
	/* These can be ORed with result of R300_EASY_TX_FORMAT()
	   We don't really know what they do. Take values from a
           constant color ? */
#	define R300_TX_FORMAT_CONST_X		(1<<5)
#	define R300_TX_FORMAT_CONST_Y		(2<<5)
#	define R300_TX_FORMAT_CONST_Z		(4<<5)
#	define R300_TX_FORMAT_CONST_W		(8<<5)

#	define R300_TX_FORMAT_YUV_MODE		0x00800000

#define R300_TX_FORMAT2_0		    0x4500 /* obvious missing in gap */
#       define R300_TX_PITCHMASK_SHIFT           0
#       define R300_TX_PITCHMASK_MASK            (2047 << 0)
#	define R500_TXFORMAT_MSB		 (1 << 14)
#	define R500_TXWIDTH_BIT11	         (1 << 15)
#	define R500_TXHEIGHT_BIT11	         (1 << 16)
#	define R500_POW2FIX2FLT			 (1 << 17)
#	define R500_SEL_FILTER4_TC0		 (0 << 18)
#	define R500_SEL_FILTER4_TC1		 (1 << 18)
#	define R500_SEL_FILTER4_TC2		 (2 << 18)
#	define R500_SEL_FILTER4_TC3		 (3 << 18)

#define R300_TX_OFFSET_0                    0x4540
	/* BEGIN: Guess from R200 */
#       define R300_TXO_ENDIAN_NO_SWAP           (0 << 0)
#       define R300_TXO_ENDIAN_BYTE_SWAP         (1 << 0)
#       define R300_TXO_ENDIAN_WORD_SWAP         (2 << 0)
#       define R300_TXO_ENDIAN_HALFDW_SWAP       (3 << 0)
#       define R300_TXO_MACRO_TILE               (1 << 2)
#       define R300_TXO_MICRO_TILE_LINEAR        (0 << 3)
#       define R300_TXO_MICRO_TILE               (1 << 3)
#       define R300_TXO_MICRO_TILE_SQUARE        (2 << 3)
#       define R300_TXO_OFFSET_MASK              0xffffffe0
#       define R300_TXO_OFFSET_SHIFT             5
	/* END: Guess from R200 */

/* 32 bit chroma key */
#define R300_TX_CHROMA_KEY_0                      0x4580
#define R300_TX_CHROMA_KEY_1                      0x4584
#define R300_TX_CHROMA_KEY_2                      0x4588
#define R300_TX_CHROMA_KEY_3                      0x458c
#define R300_TX_CHROMA_KEY_4                      0x4590
#define R300_TX_CHROMA_KEY_5                      0x4594
#define R300_TX_CHROMA_KEY_6                      0x4598
#define R300_TX_CHROMA_KEY_7                      0x459c
#define R300_TX_CHROMA_KEY_8                      0x45a0
#define R300_TX_CHROMA_KEY_9                      0x45a4
#define R300_TX_CHROMA_KEY_10                     0x45a8
#define R300_TX_CHROMA_KEY_11                     0x45ac
#define R300_TX_CHROMA_KEY_12                     0x45b0
#define R300_TX_CHROMA_KEY_13                     0x45b4
#define R300_TX_CHROMA_KEY_14                     0x45b8
#define R300_TX_CHROMA_KEY_15                     0x45bc
/* ff00ff00 == { 0, 1.0, 0, 1.0 } */

/* Border Color */
#define R300_TX_BORDER_COLOR_0              0x45c0
#define R300_TX_BORDER_COLOR_1              0x45c4
#define R300_TX_BORDER_COLOR_2              0x45c8
#define R300_TX_BORDER_COLOR_3              0x45cc
#define R300_TX_BORDER_COLOR_4              0x45d0
#define R300_TX_BORDER_COLOR_5              0x45d4
#define R300_TX_BORDER_COLOR_6              0x45d8
#define R300_TX_BORDER_COLOR_7              0x45dc
#define R300_TX_BORDER_COLOR_8              0x45e0
#define R300_TX_BORDER_COLOR_9              0x45e4
#define R300_TX_BORDER_COLOR_10             0x45e8
#define R300_TX_BORDER_COLOR_11             0x45ec
#define R300_TX_BORDER_COLOR_12             0x45f0
#define R300_TX_BORDER_COLOR_13             0x45f4
#define R300_TX_BORDER_COLOR_14             0x45f8
#define R300_TX_BORDER_COLOR_15             0x45fc


/* END: Texture specification */

/* BEGIN: Fragment program instruction set */

/* Fragment programs are written directly into register space.
 * There are separate instruction streams for texture instructions and ALU
 * instructions.
 * In order to synchronize these streams, the program is divided into up
 * to 4 nodes. Each node begins with a number of TEX operations, followed
 * by a number of ALU operations.
 * The first node can have zero TEX ops, all subsequent nodes must have at
 * least
 * one TEX ops.
 * All nodes must have at least one ALU op.
 *
 * The index of the last node is stored in PFS_CNTL_0: A value of 0 means
 * 1 node, a value of 3 means 4 nodes.
 * The total amount of instructions is defined in PFS_CNTL_2. The offsets are
 * offsets into the respective instruction streams, while *_END points to the
 * last instruction relative to this offset.
 */
#define R300_PFS_CNTL_0                     0x4600
#       define R300_PFS_CNTL_LAST_NODES_SHIFT    0
#       define R300_PFS_CNTL_LAST_NODES_MASK     (3 << 0)
#       define R300_PFS_CNTL_FIRST_NODE_HAS_TEX  (1 << 3)
#define R300_PFS_CNTL_1                     0x4604
/* There is an unshifted value here which has so far always been equal to the
 * index of the highest used temporary register.
 */
#define R300_PFS_CNTL_2                     0x4608
#       define R300_PFS_CNTL_ALU_OFFSET_SHIFT    0
#       define R300_PFS_CNTL_ALU_OFFSET_MASK     (63 << 0)
#       define R300_PFS_CNTL_ALU_END_SHIFT       6
#       define R300_PFS_CNTL_ALU_END_MASK        (63 << 6)
#       define R300_PFS_CNTL_TEX_OFFSET_SHIFT    12
#       define R300_PFS_CNTL_TEX_OFFSET_MASK     (31 << 12) /* GUESS */
#       define R300_PFS_CNTL_TEX_END_SHIFT       18
#       define R300_PFS_CNTL_TEX_END_MASK        (31 << 18) /* GUESS */

/* gap */

/* Nodes are stored backwards. The last active node is always stored in
 * PFS_NODE_3.
 * Example: In a 2-node program, NODE_0 and NODE_1 are set to 0. The
 * first node is stored in NODE_2, the second node is stored in NODE_3.
 *
 * Offsets are relative to the master offset from PFS_CNTL_2.
 */
#define R300_PFS_NODE_0                     0x4610
#define R300_PFS_NODE_1                     0x4614
#define R300_PFS_NODE_2                     0x4618
#define R300_PFS_NODE_3                     0x461C
#       define R300_PFS_NODE_ALU_OFFSET_SHIFT    0
#       define R300_PFS_NODE_ALU_OFFSET_MASK     (63 << 0)
#       define R300_PFS_NODE_ALU_END_SHIFT       6
#       define R300_PFS_NODE_ALU_END_MASK        (63 << 6)
#       define R300_PFS_NODE_TEX_OFFSET_SHIFT    12
#       define R300_PFS_NODE_TEX_OFFSET_MASK     (31 << 12)
#       define R300_PFS_NODE_TEX_END_SHIFT       17
#       define R300_PFS_NODE_TEX_END_MASK        (31 << 17)
#		define R300_PFS_NODE_OUTPUT_COLOR        (1 << 22)
#		define R300_PFS_NODE_OUTPUT_DEPTH        (1 << 23)

/* TEX
 * As far as I can tell, texture instructions cannot write into output
 * registers directly. A subsequent ALU instruction is always necessary,
 * even if it's just MAD o0, r0, 1, 0
 */
#define R300_PFS_TEXI_0                     0x4620
#	define R300_FPITX_SRC_SHIFT              0
#	define R300_FPITX_SRC_MASK               (31 << 0)
	/* GUESS */
#	define R300_FPITX_SRC_CONST              (1 << 5)
#	define R300_FPITX_DST_SHIFT              6
#	define R300_FPITX_DST_MASK               (31 << 6)
#	define R300_FPITX_IMAGE_SHIFT            11
	/* GUESS based on layout and native limits */
#       define R300_FPITX_IMAGE_MASK             (15 << 11)
/* Unsure if these are opcodes, or some kind of bitfield, but this is how
 * they were set when I checked
 */
#	define R300_FPITX_OPCODE_SHIFT		15
#		define R300_FPITX_OP_TEX	1
#		define R300_FPITX_OP_KIL	2
#		define R300_FPITX_OP_TXP	3
#		define R300_FPITX_OP_TXB	4
#	define R300_FPITX_OPCODE_MASK           (7 << 15)

/* Output format from the unfied shader */
#define R500_US_OUT_FMT                     0x46A4
#	define R500_US_OUT_FMT_C4_8         (0 << 0)
#	define R500_US_OUT_FMT_C4_10        (1 << 0)
#	define R500_US_OUT_FMT_C4_10_GAMMA  (2 << 0)
#	define R500_US_OUT_FMT_C_16         (3 << 0)
#	define R500_US_OUT_FMT_C2_16        (4 << 0)
#	define R500_US_OUT_FMT_C4_16        (5 << 0)
#	define R500_US_OUT_FMT_C_16_MPEG    (6 << 0)
#	define R500_US_OUT_FMT_C2_16_MPEG   (7 << 0)
#	define R500_US_OUT_FMT_C2_4         (8 << 0)
#	define R500_US_OUT_FMT_C_3_3_2      (9 << 0)
#	define R500_US_OUT_FMT_C_6_5_6      (10 << 0)
#	define R500_US_OUT_FMT_C_11_11_10   (11 << 0)
#	define R500_US_OUT_FMT_C_10_11_11   (12 << 0)
#	define R500_US_OUT_FMT_C_2_10_10_10 (13 << 0)
/* reserved */
#	define R500_US_OUT_FMT_UNUSED       (15 << 0)
#	define R500_US_OUT_FMT_C_16_FP      (16 << 0)
#	define R500_US_OUT_FMT_C2_16_FP     (17 << 0)
#	define R500_US_OUT_FMT_C4_16_FP     (18 << 0)
#	define R500_US_OUT_FMT_C_32_FP      (19 << 0)
#	define R500_US_OUT_FMT_C2_32_FP     (20 << 0)
#	define R500_US_OUT_FMT_C4_32_FP     (20 << 0)

/* ALU
 * The ALU instructions register blocks are enumerated according to the order
 * in which fglrx. I assume there is space for 64 instructions, since
 * each block has space for a maximum of 64 DWORDs, and this matches reported
 * native limits.
 *
 * The basic functional block seems to be one MAD for each color and alpha,
 * and an adder that adds all components after the MUL.
 *  - ADD, MUL, MAD etc.: use MAD with appropriate neutral operands
 *  - DP4: Use OUTC_DP4, OUTA_DP4
 *  - DP3: Use OUTC_DP3, OUTA_DP4, appropriate alpha operands
 *  - DPH: Use OUTC_DP4, OUTA_DP4, appropriate alpha operands
 *  - CMPH: If ARG2 > 0.5, return ARG0, else return ARG1
 *  - CMP: If ARG2 < 0, return ARG1, else return ARG0
 *  - FLR: use FRC+MAD
 *  - XPD: use MAD+MAD
 *  - SGE, SLT: use MAD+CMP
 *  - RSQ: use ABS modifier for argument
 *  - Use OUTC_REPL_ALPHA to write results of an alpha-only operation
 *    (e.g. RCP) into color register
 *  - apparently, there's no quick DST operation
 *  - fglrx set FPI2_UNKNOWN_31 on a "MAD fragment.color, tmp0, tmp1, tmp2"
 *  - fglrx set FPI2_UNKNOWN_31 on a "MAX r2, r1, c0"
 *  - fglrx once set FPI0_UNKNOWN_31 on a "FRC r1, r1"
 *
 * Operand selection
 * First stage selects three sources from the available registers and
 * constant parameters. This is defined in INSTR1 (color) and INSTR3 (alpha).
 * fglrx sorts the three source fields: Registers before constants,
 * lower indices before higher indices; I do not know whether this is
 * necessary.
 *
 * fglrx fills unused sources with "read constant 0"
 * According to specs, you cannot select more than two different constants.
 *
 * Second stage selects the operands from the sources. This is defined in
 * INSTR0 (color) and INSTR2 (alpha). You can also select the special constants
 * zero and one.
 * Swizzling and negation happens in this stage, as well.
 *
 * Important: Color and alpha seem to be mostly separate, i.e. their sources
 * selection appears to be fully independent (the register storage is probably
 * physically split into a color and an alpha section).
 * However (because of the apparent physical split), there is some interaction
 * WRT swizzling. If, for example, you want to load an R component into an
 * Alpha operand, this R component is taken from a *color* source, not from
 * an alpha source. The corresponding register doesn't even have to appear in
 * the alpha sources list. (I hope this all makes sense to you)
 *
 * Destination selection
 * The destination register index is in FPI1 (color) and FPI3 (alpha)
 * together with enable bits.
 * There are separate enable bits for writing into temporary registers
 * (DSTC_REG_* /DSTA_REG) and and program output registers (DSTC_OUTPUT_*
 * /DSTA_OUTPUT). You can write to both at once, or not write at all (the
 * same index must be used for both).
 *
 * Note: There is a special form for LRP
 *  - Argument order is the same as in ARB_fragment_program.
 *  - Operation is MAD
 *  - ARG1 is set to ARGC_SRC1C_LRP/ARGC_SRC1A_LRP
 *  - Set FPI0/FPI2_SPECIAL_LRP
 * Arbitrary LRP (including support for swizzling) requires vanilla MAD+MAD
 */
#define R300_PFS_INSTR1_0                   0x46C0
#       define R300_FPI1_SRC0C_SHIFT             0
#       define R300_FPI1_SRC0C_MASK              (31 << 0)
#       define R300_FPI1_SRC0C_CONST             (1 << 5)
#       define R300_FPI1_SRC1C_SHIFT             6
#       define R300_FPI1_SRC1C_MASK              (31 << 6)
#       define R300_FPI1_SRC1C_CONST             (1 << 11)
#       define R300_FPI1_SRC2C_SHIFT             12
#       define R300_FPI1_SRC2C_MASK              (31 << 12)
#       define R300_FPI1_SRC2C_CONST             (1 << 17)
#       define R300_FPI1_SRC_MASK                0x0003ffff
#       define R300_FPI1_DSTC_SHIFT              18
#       define R300_FPI1_DSTC_MASK               (31 << 18)
#		define R300_FPI1_DSTC_REG_MASK_SHIFT     23
#       define R300_FPI1_DSTC_REG_X              (1 << 23)
#       define R300_FPI1_DSTC_REG_Y              (1 << 24)
#       define R300_FPI1_DSTC_REG_Z              (1 << 25)
#		define R300_FPI1_DSTC_OUTPUT_MASK_SHIFT  26
#       define R300_FPI1_DSTC_OUTPUT_X           (1 << 26)
#       define R300_FPI1_DSTC_OUTPUT_Y           (1 << 27)
#       define R300_FPI1_DSTC_OUTPUT_Z           (1 << 28)

#define R300_PFS_INSTR3_0                   0x47C0
#       define R300_FPI3_SRC0A_SHIFT             0
#       define R300_FPI3_SRC0A_MASK              (31 << 0)
#       define R300_FPI3_SRC0A_CONST             (1 << 5)
#       define R300_FPI3_SRC1A_SHIFT             6
#       define R300_FPI3_SRC1A_MASK              (31 << 6)
#       define R300_FPI3_SRC1A_CONST             (1 << 11)
#       define R300_FPI3_SRC2A_SHIFT             12
#       define R300_FPI3_SRC2A_MASK              (31 << 12)
#       define R300_FPI3_SRC2A_CONST             (1 << 17)
#       define R300_FPI3_SRC_MASK                0x0003ffff
#       define R300_FPI3_DSTA_SHIFT              18
#       define R300_FPI3_DSTA_MASK               (31 << 18)
#       define R300_FPI3_DSTA_REG                (1 << 23)
#       define R300_FPI3_DSTA_OUTPUT             (1 << 24)
#		define R300_FPI3_DSTA_DEPTH              (1 << 27)

#define R300_PFS_INSTR0_0                   0x48C0
#       define R300_FPI0_ARGC_SRC0C_XYZ          0
#       define R300_FPI0_ARGC_SRC0C_XXX          1
#       define R300_FPI0_ARGC_SRC0C_YYY          2
#       define R300_FPI0_ARGC_SRC0C_ZZZ          3
#       define R300_FPI0_ARGC_SRC1C_XYZ          4
#       define R300_FPI0_ARGC_SRC1C_XXX          5
#       define R300_FPI0_ARGC_SRC1C_YYY          6
#       define R300_FPI0_ARGC_SRC1C_ZZZ          7
#       define R300_FPI0_ARGC_SRC2C_XYZ          8
#       define R300_FPI0_ARGC_SRC2C_XXX          9
#       define R300_FPI0_ARGC_SRC2C_YYY          10
#       define R300_FPI0_ARGC_SRC2C_ZZZ          11
#       define R300_FPI0_ARGC_SRC0A              12
#       define R300_FPI0_ARGC_SRC1A              13
#       define R300_FPI0_ARGC_SRC2A              14
#       define R300_FPI0_ARGC_SRC1C_LRP          15
#       define R300_FPI0_ARGC_ZERO               20
#       define R300_FPI0_ARGC_ONE                21
	/* GUESS */
#       define R300_FPI0_ARGC_HALF               22
#       define R300_FPI0_ARGC_SRC0C_YZX          23
#       define R300_FPI0_ARGC_SRC1C_YZX          24
#       define R300_FPI0_ARGC_SRC2C_YZX          25
#       define R300_FPI0_ARGC_SRC0C_ZXY          26
#       define R300_FPI0_ARGC_SRC1C_ZXY          27
#       define R300_FPI0_ARGC_SRC2C_ZXY          28
#       define R300_FPI0_ARGC_SRC0CA_WZY         29
#       define R300_FPI0_ARGC_SRC1CA_WZY         30
#       define R300_FPI0_ARGC_SRC2CA_WZY         31

#       define R300_FPI0_ARG0C_SHIFT             0
#       define R300_FPI0_ARG0C_MASK              (31 << 0)
#       define R300_FPI0_ARG0C_NEG               (1 << 5)
#       define R300_FPI0_ARG0C_ABS               (1 << 6)
#       define R300_FPI0_ARG1C_SHIFT             7
#       define R300_FPI0_ARG1C_MASK              (31 << 7)
#       define R300_FPI0_ARG1C_NEG               (1 << 12)
#       define R300_FPI0_ARG1C_ABS               (1 << 13)
#       define R300_FPI0_ARG2C_SHIFT             14
#       define R300_FPI0_ARG2C_MASK              (31 << 14)
#       define R300_FPI0_ARG2C_NEG               (1 << 19)
#       define R300_FPI0_ARG2C_ABS               (1 << 20)
#       define R300_FPI0_SPECIAL_LRP             (1 << 21)
#       define R300_FPI0_OUTC_MAD                (0 << 23)
#       define R300_FPI0_OUTC_DP3                (1 << 23)
#       define R300_FPI0_OUTC_DP4                (2 << 23)
#       define R300_FPI0_OUTC_MIN                (4 << 23)
#       define R300_FPI0_OUTC_MAX                (5 << 23)
#       define R300_FPI0_OUTC_CMPH               (7 << 23)
#       define R300_FPI0_OUTC_CMP                (8 << 23)
#       define R300_FPI0_OUTC_FRC                (9 << 23)
#       define R300_FPI0_OUTC_REPL_ALPHA         (10 << 23)
#       define R300_FPI0_OUTC_SAT                (1 << 30)
#       define R300_FPI0_INSERT_NOP              (1 << 31)

#define R300_PFS_INSTR2_0                   0x49C0
#       define R300_FPI2_ARGA_SRC0C_X            0
#       define R300_FPI2_ARGA_SRC0C_Y            1
#       define R300_FPI2_ARGA_SRC0C_Z            2
#       define R300_FPI2_ARGA_SRC1C_X            3
#       define R300_FPI2_ARGA_SRC1C_Y            4
#       define R300_FPI2_ARGA_SRC1C_Z            5
#       define R300_FPI2_ARGA_SRC2C_X            6
#       define R300_FPI2_ARGA_SRC2C_Y            7
#       define R300_FPI2_ARGA_SRC2C_Z            8
#       define R300_FPI2_ARGA_SRC0A              9
#       define R300_FPI2_ARGA_SRC1A              10
#       define R300_FPI2_ARGA_SRC2A              11
#       define R300_FPI2_ARGA_SRC1A_LRP          15
#       define R300_FPI2_ARGA_ZERO               16
#       define R300_FPI2_ARGA_ONE                17
	/* GUESS */
#       define R300_FPI2_ARGA_HALF               18
#       define R300_FPI2_ARG0A_SHIFT             0
#       define R300_FPI2_ARG0A_MASK              (31 << 0)
#       define R300_FPI2_ARG0A_NEG               (1 << 5)
	/* GUESS */
#	define R300_FPI2_ARG0A_ABS		 (1 << 6)
#       define R300_FPI2_ARG1A_SHIFT             7
#       define R300_FPI2_ARG1A_MASK              (31 << 7)
#       define R300_FPI2_ARG1A_NEG               (1 << 12)
	/* GUESS */
#	define R300_FPI2_ARG1A_ABS		 (1 << 13)
#       define R300_FPI2_ARG2A_SHIFT             14
#       define R300_FPI2_ARG2A_MASK              (31 << 14)
#       define R300_FPI2_ARG2A_NEG               (1 << 19)
	/* GUESS */
#	define R300_FPI2_ARG2A_ABS		 (1 << 20)
#       define R300_FPI2_SPECIAL_LRP             (1 << 21)
#       define R300_FPI2_OUTA_MAD                (0 << 23)
#       define R300_FPI2_OUTA_DP4                (1 << 23)
#       define R300_FPI2_OUTA_MIN                (2 << 23)
#       define R300_FPI2_OUTA_MAX                (3 << 23)
#       define R300_FPI2_OUTA_CMP                (6 << 23)
#       define R300_FPI2_OUTA_FRC                (7 << 23)
#       define R300_FPI2_OUTA_EX2                (8 << 23)
#       define R300_FPI2_OUTA_LG2                (9 << 23)
#       define R300_FPI2_OUTA_RCP                (10 << 23)
#       define R300_FPI2_OUTA_RSQ                (11 << 23)
#       define R300_FPI2_OUTA_SAT                (1 << 30)
#       define R300_FPI2_UNKNOWN_31              (1 << 31)
/* END: Fragment program instruction set */

/* Fog: Fog Blending Enable */
#define FG_FOG_BLEND                             0x4bc0
#       define FG_FOG_BLEND_DISABLE              (0 << 0)
#       define FG_FOG_BLEND_ENABLE               (1 << 0)
#	define FG_FOG_BLEND_FN_LINEAR            (0 << 1)
#	define FG_FOG_BLEND_FN_EXP               (1 << 1)
#	define FG_FOG_BLEND_FN_EXP2              (2 << 1)
#	define FG_FOG_BLEND_FN_CONSTANT          (3 << 1)
#	define FG_FOG_BLEND_FN_MASK              0x00000006

/* Fog: Red Component of Fog Color */
#define FG_FOG_COLOR_R                           0x4bc8
/* Fog: Green Component of Fog Color */
#define FG_FOG_COLOR_G                           0x4bcc
/* Fog: Blue Component of Fog Color */
#define FG_FOG_COLOR_B                           0x4db0
#	define FG_FOG_COLOR_MASK 0x000001ff

/* Fog: Constant Factor for Fog Blending */
#define FG_FOG_FACTOR                            0x4bc4
#	define FG_FOG_FACTOR_MASK 0x000001ff

/* Fog: Alpha function */
#define FG_ALPHA_FUNC                            0x4bd4
#       define R300_REF_ALPHA_MASK               0x000000ff
#       define FG_ALPHA_FUNC_NEVER                     (0 << 8)
#       define FG_ALPHA_FUNC_LESS                      (1 << 8)
#       define FG_ALPHA_FUNC_EQUAL                     (2 << 8)
#       define FG_ALPHA_FUNC_LE                        (3 << 8)
#       define FG_ALPHA_FUNC_GREATER                   (4 << 8)
#       define FG_ALPHA_FUNC_NOTEQUAL                  (5 << 8)
#       define FG_ALPHA_FUNC_GE                        (6 << 8)
#       define FG_ALPHA_FUNC_ALWAYS                    (7 << 8)
#       define R300_ALPHA_TEST_OP_MASK                 (7 << 8)
#       define FG_ALPHA_FUNC_DISABLE                   (0 << 11)
#       define FG_ALPHA_FUNC_ENABLE                    (1 << 11)
#       define FG_ALPHA_FUNC_10BIT                     (0 << 12)
#       define FG_ALPHA_FUNC_8BIT                      (1 << 12)
/* gap in AMD spec */
#       define FG_ALPHA_FUNC_MASK_DISABLE              (0 << 16)
#       define FG_ALPHA_FUNC_MASK_ENABLE               (1 << 16)
#       define FG_ALPHA_FUNC_CFG_2_OF_4                (0 << 17)
#       define FG_ALPHA_FUNC_CFG_3_OF_6                (1 << 17)
/* gap in AMD spec */
#       define FG_ALPHA_FUNC_DITH_DISABLE              (0 << 20)
#       define FG_ALPHA_FUNC_DITH_ENABLE               (1 << 20)
/* gap in AMD spec */
#       define FG_ALPHA_FUNC_OFFSET_DISABLE            (0 << 24) /* Not supported in R520. Default R300 and RV350 behaviour. */
#       define FG_ALPHA_FUNC_OFFSET_ENABLE             (1 << 24) /* Not supported in R520 */
#       define FG_ALPHA_FUNC_DISC_ZERO_MASK_DISABLE    (0 << 25)
#       define FG_ALPHA_FUNC_DISC_ZERO_MASK_ENABLE     (1 << 25)
/* gap in AMD spec */
#       define FG_ALPHA_FUNC_FP16_DISABLE              (0 << 28)
#       define FG_ALPHA_FUNC_FP16_ENABLE               (1 << 28)
/* gap in AMD spec */

/* Fog: Where does the depth come from? */
#define R300_FG_DEPTH_SRC                  0x4bd8
#	define R300_FG_DEPTH_SRC_SCAN   (0 << 0)
#	define R300_FG_DEPTH_SRC_SHADER (1 << 0)

/* Fog: Alpha Compare Value */
#define FG_ALPHA_VALUE                0x4be0
#	define FG_ALPHA_VALUE_MASK 0x0000ffff

/* gap */

/* Fragment program parameters in 7.16 floating point */
#define R300_PFS_PARAM_0_X                  0x4C00
#define R300_PFS_PARAM_0_Y                  0x4C04
#define R300_PFS_PARAM_0_Z                  0x4C08
#define R300_PFS_PARAM_0_W                  0x4C0C
/* GUESS: PARAM_31 is last, based on native limits reported by fglrx */
#define R300_PFS_PARAM_31_X                 0x4DF0
#define R300_PFS_PARAM_31_Y                 0x4DF4
#define R300_PFS_PARAM_31_Z                 0x4DF8
#define R300_PFS_PARAM_31_W                 0x4DFC

/* Unpipelined. */
#define R300_RB3D_CCTL                      0x4e00
/* gap in AMD docs */
#	define R300_RB3D_CCTL_NUM_MULTIWRITES_1_BUFFER                (0 << 5)
#	define R300_RB3D_CCTL_NUM_MULTIWRITES_2_BUFFERS               (1 << 5)
#	define R300_RB3D_CCTL_NUM_MULTIWRITES_3_BUFFERS               (2 << 5)
#	define R300_RB3D_CCTL_NUM_MULTIWRITES_4_BUFFERS               (3 << 5)
#	define R300_RB3D_CCTL_CLRCMP_FLIPE_DISABLE                    (0 << 7)
#	define R300_RB3D_CCTL_CLRCMP_FLIPE_ENABLE                     (1 << 7)
/* gap in AMD docs */
#	define R300_RB3D_CCTL_AA_COMPRESSION_DISABLE                  (0 << 9)
#	define R300_RB3D_CCTL_AA_COMPRESSION_ENABLE                   (1 << 9)
#	define R300_RB3D_CCTL_CMASK_DISABLE                           (0 << 10)
#	define R300_RB3D_CCTL_CMASK_ENABLE                            (1 << 10)
/* reserved */
#	define R300_RB3D_CCTL_INDEPENDENT_COLOR_CHANNEL_MASK_DISABLE  (0 << 12)
#	define R300_RB3D_CCTL_INDEPENDENT_COLOR_CHANNEL_MASK_ENABLE   (1 << 12)
#	define R300_RB3D_CCTL_WRITE_COMPRESSION_ENABLE                (0 << 13)
#	define R300_RB3D_CCTL_WRITE_COMPRESSION_DISABLE               (1 << 13)
#	define R300_RB3D_CCTL_INDEPENDENT_COLORFORMAT_ENABLE_DISABLE  (0 << 14)
#	define R300_RB3D_CCTL_INDEPENDENT_COLORFORMAT_ENABLE_ENABLE   (1 << 14)


/* Notes:
 * - AFAIK fglrx always sets BLEND_UNKNOWN when blending is used in
 *   the application
 * - AFAIK fglrx always sets BLEND_NO_SEPARATE when CBLEND and ABLEND
 *    are set to the same
 *   function (both registers are always set up completely in any case)
 * - Most blend flags are simply copied from R200 and not tested yet
 */
#define R300_RB3D_CBLEND                    0x4E04
#define R300_RB3D_ABLEND                    0x4E08
/* the following only appear in CBLEND */
#       define R300_BLEND_ENABLE                     (1 << 0)
#       define R300_BLEND_UNKNOWN                    (3 << 1)
#       define R300_BLEND_NO_SEPARATE                (1 << 3)
/* the following are shared between CBLEND and ABLEND */
#       define R300_FCN_MASK                         (3  << 12)
#       define R300_COMB_FCN_ADD_CLAMP               (0  << 12)
#       define R300_COMB_FCN_ADD_NOCLAMP             (1  << 12)
#       define R300_COMB_FCN_SUB_CLAMP               (2  << 12)
#       define R300_COMB_FCN_SUB_NOCLAMP             (3  << 12)
#       define R300_COMB_FCN_MIN                     (4  << 12)
#       define R300_COMB_FCN_MAX                     (5  << 12)
#       define R300_COMB_FCN_RSUB_CLAMP              (6  << 12)
#       define R300_COMB_FCN_RSUB_NOCLAMP            (7  << 12)
#       define R300_BLEND_GL_ZERO                    (32)
#       define R300_BLEND_GL_ONE                     (33)
#       define R300_BLEND_GL_SRC_COLOR               (34)
#       define R300_BLEND_GL_ONE_MINUS_SRC_COLOR     (35)
#       define R300_BLEND_GL_DST_COLOR               (36)
#       define R300_BLEND_GL_ONE_MINUS_DST_COLOR     (37)
#       define R300_BLEND_GL_SRC_ALPHA               (38)
#       define R300_BLEND_GL_ONE_MINUS_SRC_ALPHA     (39)
#       define R300_BLEND_GL_DST_ALPHA               (40)
#       define R300_BLEND_GL_ONE_MINUS_DST_ALPHA     (41)
#       define R300_BLEND_GL_SRC_ALPHA_SATURATE      (42)
#       define R300_BLEND_GL_CONST_COLOR             (43)
#       define R300_BLEND_GL_ONE_MINUS_CONST_COLOR   (44)
#       define R300_BLEND_GL_CONST_ALPHA             (45)
#       define R300_BLEND_GL_ONE_MINUS_CONST_ALPHA   (46)
#       define R300_BLEND_MASK                       (63)
#       define R300_SRC_BLEND_SHIFT                  (16)
#       define R300_DST_BLEND_SHIFT                  (24)

/* Constant color used by the blender. Pipelined through the blender.
 * Note: For R520, this field is ignored, use RB3D_CONSTANT_COLOR_GB__BLUE,
 * RB3D_CONSTANT_COLOR_GB__GREEN, etc. instead.
 */
#define R300_RB3D_BLEND_COLOR               0x4E10


/* 3D Color Channel Mask. If all the channels used in the current color format
 * are disabled, then the cb will discard all the incoming quads. Pipelined
 * through the blender.
 */
#define RB3D_COLOR_CHANNEL_MASK                  0x4E0C
#	define RB3D_COLOR_CHANNEL_MASK_BLUE_MASK0  (1 << 0)
#	define RB3D_COLOR_CHANNEL_MASK_GREEN_MASK0 (1 << 1)
#	define RB3D_COLOR_CHANNEL_MASK_RED_MASK0   (1 << 2)
#	define RB3D_COLOR_CHANNEL_MASK_ALPHA_MASK0 (1 << 3)
#	define RB3D_COLOR_CHANNEL_MASK_BLUE_MASK1  (1 << 4)
#	define RB3D_COLOR_CHANNEL_MASK_GREEN_MASK1 (1 << 5)
#	define RB3D_COLOR_CHANNEL_MASK_RED_MASK1   (1 << 6)
#	define RB3D_COLOR_CHANNEL_MASK_ALPHA_MASK1 (1 << 7)
#	define RB3D_COLOR_CHANNEL_MASK_BLUE_MASK2  (1 << 8)
#	define RB3D_COLOR_CHANNEL_MASK_GREEN_MASK2 (1 << 9)
#	define RB3D_COLOR_CHANNEL_MASK_RED_MASK2   (1 << 10)
#	define RB3D_COLOR_CHANNEL_MASK_ALPHA_MASK2 (1 << 11)
#	define RB3D_COLOR_CHANNEL_MASK_BLUE_MASK3  (1 << 12)
#	define RB3D_COLOR_CHANNEL_MASK_GREEN_MASK3 (1 << 13)
#	define RB3D_COLOR_CHANNEL_MASK_RED_MASK3   (1 << 14)
#	define RB3D_COLOR_CHANNEL_MASK_ALPHA_MASK3 (1 << 15)

/* Clear color that is used when the color mask is set to 00. Unpipelined.
 * Program this register with a 32-bit value in ARGB8888 or ARGB2101010
 * formats, ignoring the fields.
 */
#define RB3D_COLOR_CLEAR_VALUE                   0x4e14

/* gap */

/* Color Compare Color. Stalls the 2d/3d datapath until it is idle. */
#define RB3D_CLRCMP_CLR                     0x4e20

/* Color Compare Mask. Stalls the 2d/3d datapath until it is idle. */
#define RB3D_CLRCMP_MSK                     0x4e24

/* Color Buffer Address Offset of multibuffer 0. Unpipelined. */
#define R300_RB3D_COLOROFFSET0              0x4E28
#       define R300_COLOROFFSET_MASK             0xFFFFFFF0 /* GUESS */
/* Color Buffer Address Offset of multibuffer 1. Unpipelined. */
#define R300_RB3D_COLOROFFSET1              0x4E2C
/* Color Buffer Address Offset of multibuffer 2. Unpipelined. */
#define R300_RB3D_COLOROFFSET2              0x4E30
/* Color Buffer Address Offset of multibuffer 3. Unpipelined. */
#define R300_RB3D_COLOROFFSET3              0x4E34

/* Color buffer format and tiling control for all the multibuffers and the
 * pitch of multibuffer 0 to 3. Unpipelined. The cache must be empty before any
 * of the registers are changed.
 *
 * Bit 16: Larger tiles
 * Bit 17: 4x2 tiles
 * Bit 18: Extremely weird tile like, but some pixels duplicated?
 */
#define R300_RB3D_COLORPITCH0               0x4E38
#       define R300_COLORPITCH_MASK              0x00001FF8 /* GUESS, should be 13:1 */
#       define R300_COLOR_TILE_DISABLE            (0 << 16)
#       define R300_COLOR_TILE_ENABLE             (1 << 16)
#       define R300_COLOR_MICROTILE_DISABLE       (0 << 17)
#       define R300_COLOR_MICROTILE_ENABLE        (1 << 17)
#       define R300_COLOR_MICROTILE_ENABLE_SQUARE (2 << 17) /* Only available in 16-bit */
#       define R300_COLOR_ENDIAN_NO_SWAP          (0 << 19)
#       define R300_COLOR_ENDIAN_WORD_SWAP        (1 << 19)
#       define R300_COLOR_ENDIAN_DWORD_SWAP       (2 << 19)
#       define R300_COLOR_ENDIAN_HALF_DWORD_SWAP  (3 << 19)
#	define R300_COLOR_FORMAT_ARGB10101010     (0 << 21)
#	define R300_COLOR_FORMAT_UV1010           (1 << 21)
#	define R300_COLOR_FORMAT_CI8              (2 << 21) /* 2D only */
#	define R300_COLOR_FORMAT_ARGB1555         (3 << 21)
#       define R300_COLOR_FORMAT_RGB565           (4 << 21)
#       define R300_COLOR_FORMAT_ARGB2101010      (5 << 21)
#       define R300_COLOR_FORMAT_ARGB8888         (6 << 21)
#       define R300_COLOR_FORMAT_ARGB32323232     (7 << 21)
/* reserved */
#       define R300_COLOR_FORMAT_I8               (9 << 21)
#       define R300_COLOR_FORMAT_ARGB16161616     (10 << 21)
#       define R300_COLOR_FORMAT_VYUY             (11 << 21)
#       define R300_COLOR_FORMAT_YVYU             (12 << 21)
#       define R300_COLOR_FORMAT_UV88             (13 << 21)
#       define R300_COLOR_FORMAT_I10              (14 << 21)
#       define R300_COLOR_FORMAT_ARGB4444         (15 << 21)
#define R300_RB3D_COLORPITCH1               0x4E3C
#define R300_RB3D_COLORPITCH2               0x4E40
#define R300_RB3D_COLORPITCH3               0x4E44

/* gap */

/* Destination Color Buffer Cache Control/Status. If the cb is in e2 mode, then
 * a flush or free will not occur upon a write to this register, but a sync
 * will be immediately sent if one is requested. If both DC_FLUSH and DC_FREE
 * are zero but DC_FINISH is one, then a sync will be sent immediately -- the
 * cb will not wait for all the previous operations to complete before sending
 * the sync. Unpipelined except when DC_FINISH and DC_FREE are both set to
 * zero.
 *
 * Set to 0A before 3D operations, set to 02 afterwards.
 */
#define R300_RB3D_DSTCACHE_CTLSTAT               0x4e4c
#	define RB3D_DSTCACHE_CTLSTAT_DC_FLUSH_NO_EFFECT         (0 << 0)
#	define RB3D_DSTCACHE_CTLSTAT_DC_FLUSH_NO_EFFECT_1       (1 << 0)
#	define RB3D_DSTCACHE_CTLSTAT_DC_FLUSH_FLUSH_DIRTY_3D    (2 << 0)
#	define RB3D_DSTCACHE_CTLSTAT_DC_FLUSH_FLUSH_DIRTY_3D_1  (3 << 0)
#	define RB3D_DSTCACHE_CTLSTAT_DC_FREE_NO_EFFECT          (0 << 2)
#	define RB3D_DSTCACHE_CTLSTAT_DC_FREE_NO_EFFECT_1        (1 << 2)
#	define RB3D_DSTCACHE_CTLSTAT_DC_FREE_FREE_3D_TAGS       (2 << 2)
#	define RB3D_DSTCACHE_CTLSTAT_DC_FREE_FREE_3D_TAGS_1     (3 << 2)
#	define RB3D_DSTCACHE_CTLSTAT_DC_FINISH_NO_SIGNAL        (0 << 4)
#	define RB3D_DSTCACHE_CTLSTAT_DC_FINISH_SIGNAL           (1 << 4)

#define R300_RB3D_DITHER_CTL 0x4E50
#	define R300_RB3D_DITHER_CTL_DITHER_MODE_TRUNCATE         (0 << 0)
#	define R300_RB3D_DITHER_CTL_DITHER_MODE_ROUND            (1 << 0)
#	define R300_RB3D_DITHER_CTL_DITHER_MODE_LUT              (2 << 0)
/* reserved */
#	define R300_RB3D_DITHER_CTL_ALPHA_DITHER_MODE_TRUNCATE   (0 << 2)
#	define R300_RB3D_DITHER_CTL_ALPHA_DITHER_MODE_ROUND      (1 << 2)
#	define R300_RB3D_DITHER_CTL_ALPHA_DITHER_MODE_LUT        (2 << 2)
/* reserved */

/* Resolve buffer destination address. The cache must be empty before changing
 * this register if the cb is in resolve mode. Unpipelined
 */
#define RB3D_AARESOLVE_OFFSET        0x4e80
#	define RB3D_AARESOLVE_OFFSET_SHIFT 5
#	define RB3D_AARESOLVE_OFFSET_MASK 0xffffffe0 /* At least according to the calculations of Christoph Brill */

/* Resolve Buffer Pitch and Tiling Control. The cache must be empty before
 * changing this register if the cb is in resolve mode. Unpipelined
 */
#define RB3D_AARESOLVE_PITCH         0x4e84
#	define RB3D_AARESOLVE_PITCH_SHIFT 1
#	define RB3D_AARESOLVE_PITCH_MASK  0x00003ffe /* At least according to the calculations of Christoph Brill */

/* Resolve Buffer Control. Unpipelined */
#define RB3D_AARESOLVE_CTL           0x4e88
#	define RB3D_AARESOLVE_CTL_AARESOLVE_MODE_NORMAL   (0 << 0)
#	define RB3D_AARESOLVE_CTL_AARESOLVE_MODE_RESOLVE  (1 << 0)
#	define RB3D_AARESOLVE_CTL_AARESOLVE_GAMMA_10      (0 << 1)
#	define RB3D_AARESOLVE_CTL_AARESOLVE_GAMMA_22      (1 << 1)
#	define RB3D_AARESOLVE_CTL_AARESOLVE_ALPHA_SAMPLE0 (0 << 2)
#	define RB3D_AARESOLVE_CTL_AARESOLVE_ALPHA_AVERAGE (1 << 2)
  

/* Discard src pixels less than or equal to threshold. */
#define RB3D_DISCARD_SRC_PIXEL_LTE_THRESHOLD 0x4ea0
/* Discard src pixels greater than or equal to threshold. */
#define RB3D_DISCARD_SRC_PIXEL_GTE_THRESHOLD 0x4ea4
#	define RB3D_DISCARD_SRC_PIXEL_THRESHOLD_BLUE_SHIFT 0
#	define RB3D_DISCARD_SRC_PIXEL_THRESHOLD_BLUE_MASK 0x000000ff
#	define RB3D_DISCARD_SRC_PIXEL_THRESHOLD_GREEN_SHIFT 8
#	define RB3D_DISCARD_SRC_PIXEL_THRESHOLD_GREEN_MASK 0x0000ff00
#	define RB3D_DISCARD_SRC_PIXEL_THRESHOLD_RED_SHIFT 16
#	define RB3D_DISCARD_SRC_PIXEL_THRESHOLD_RED_MASK 0x00ff0000
#	define RB3D_DISCARD_SRC_PIXEL_THRESHOLD_ALPHA_SHIFT 24
#	define RB3D_DISCARD_SRC_PIXEL_THRESHOLD_ALPHA_MASK 0xff000000

/* 3D ROP Control. Stalls the 2d/3d datapath until it is idle. */
#define RB3D_ROPCNTL                             0x4e18
/* TODO: fill in content here */

/* Color Compare Flip. Stalls the 2d/3d datapath until it is idle. */
#define RB3D_CLRCMP_FLIPE                        0x4e1c

/* Sets the fifo sizes */
#define RB3D_FIFO_SIZE                           0x4ef4
#	define RB3D_FIFO_SIZE_OP_FIFO_SIZE_FULL   (0 << 0)
#	define RB3D_FIFO_SIZE_OP_FIFO_SIZE_HALF   (1 << 0)
#	define RB3D_FIFO_SIZE_OP_FIFO_SIZE_QUATER (2 << 0)
#	define RB3D_FIFO_SIZE_OP_FIFO_SIZE_EIGTHS (3 << 0)
/* gap in AMD spec */

/* Constant color used by the blender. Pipelined through the blender. */
#define RB3D_CONSTANT_COLOR_AR                   0x4ef8
#	define RB3D_CONSTANT_COLOR_AR_RED_MASK    0x0000ffff
#	define RB3D_CONSTANT_COLOR_AR_RED_SHIFT   0
#	define RB3D_CONSTANT_COLOR_AR_ALPHA_MASK  0xffff0000
#	define RB3D_CONSTANT_COLOR_AR_ALPHA_SHIFT 16

/* Constant color used by the blender. Pipelined through the blender. */
#define RB3D_CONSTANT_COLOR_GB                   0x4efc
#	define RB3D_CONSTANT_COLOR_AR_BLUE_MASK   0x0000ffff
#	define RB3D_CONSTANT_COLOR_AR_BLUE_SHIFT  0
#	define RB3D_CONSTANT_COLOR_AR_GREEN_MASK  0xffff0000
#	define RB3D_CONSTANT_COLOR_AR_GREEN_SHIFT 16

/* gap */
/* There seems to be no "write only" setting, so use Z-test = ALWAYS
 * for this.
 * Bit (1<<8) is the "test" bit. so plain write is 6  - vd
 */
#define R300_RB3D_ZSTENCIL_CNTL_0                   0x4F00
#       define R300_RB3D_Z_DISABLED_1            0x00000010
#       define R300_RB3D_Z_DISABLED_2            0x00000014
#       define R300_RB3D_Z_TEST                  0x00000012
#       define R300_RB3D_Z_TEST_AND_WRITE        0x00000016
#       define R300_RB3D_Z_WRITE_ONLY        	 0x00000006

#       define R300_RB3D_Z_TEST                  0x00000012
#       define R300_RB3D_Z_TEST_AND_WRITE        0x00000016
#       define R300_RB3D_Z_WRITE_ONLY        	 0x00000006
#	define R300_RB3D_STENCIL_ENABLE		 0x00000001

#define R300_RB3D_ZSTENCIL_CNTL_1                   0x4f04
	/* functions */
#	define R300_ZS_NEVER			0
#	define R300_ZS_LESS			1
#	define R300_ZS_LEQUAL			2
#	define R300_ZS_EQUAL			3
#	define R300_ZS_GEQUAL			4
#	define R300_ZS_GREATER			5
#	define R300_ZS_NOTEQUAL			6
#	define R300_ZS_ALWAYS			7
#       define R300_ZS_MASK                     7
	/* operations */
#	define R300_ZS_KEEP			0
#	define R300_ZS_ZERO			1
#	define R300_ZS_REPLACE			2
#	define R300_ZS_INCR			3
#	define R300_ZS_DECR			4
#	define R300_ZS_INVERT			5
#	define R300_ZS_INCR_WRAP		6
#	define R300_ZS_DECR_WRAP		7
	/* front and back refer to operations done for front
	   and back faces, i.e. separate stencil function support */
#	define R300_RB3D_ZS1_DEPTH_FUNC_SHIFT		0
#	define R300_RB3D_ZS1_FRONT_FUNC_SHIFT		3
#	define R300_RB3D_ZS1_FRONT_FAIL_OP_SHIFT	6
#	define R300_RB3D_ZS1_FRONT_ZPASS_OP_SHIFT	9
#	define R300_RB3D_ZS1_FRONT_ZFAIL_OP_SHIFT      12
#	define R300_RB3D_ZS1_BACK_FUNC_SHIFT           15
#	define R300_RB3D_ZS1_BACK_FAIL_OP_SHIFT        18
#	define R300_RB3D_ZS1_BACK_ZPASS_OP_SHIFT       21
#	define R300_RB3D_ZS1_BACK_ZFAIL_OP_SHIFT       24

#define ZB_STENCILREFMASK                        0x4f08
#	define ZB_STENCILREFMASK_STENCILREF_SHIFT       0
#	define ZB_STENCILREFMASK_STENCILREF_MASK        0x000000ff
#	define ZB_STENCILREFMASK_STENCILMASK_SHIFT      8
#	define ZB_STENCILREFMASK_STENCILMASK_MASK       0x0000ff00
#	define ZB_STENCILREFMASK_STENCILWRITEMASK_SHIFT	16
#	define ZB_STENCILREFMASK_STENCILWRITEMASK_MASK  0xffff0000

/* gap */

#define ZB_FORMAT                                   0x4f10
#	define ZB_FORMAR_DEPTHFORMAT_16BIT_INT_Z   (0 << 0)
#	define ZB_FORMAR_DEPTHFORMAT_16BIT_13E3    (1 << 0)
#	define ZB_FORMAR_DEPTHFORMAT_24BIT_INT_Z   (2 << 0)
/* reserved up to (15 << 0) */
#	define ZB_FORMAR_INVERT_13E3_LEADING_ONES  (0 << 4)
#	define ZB_FORMAR_INVERT_13E3_LEADING_ZEROS (1 << 4)
#	define ZB_FORMAR_PEQ8_UNUSED               (1 << 5)

#define R300_RB3D_EARLY_Z                           0x4F14
#	define R300_EARLY_Z_DISABLE              (0 << 0)
#	define R300_EARLY_Z_ENABLE               (1 << 0)

/* gap */

#define ZB_ZCACHE_CTLSTAT            0x4f18
#       define ZB_ZCACHE_CTLSTAT_ZC_FLUSH_NO_EFFECT      (0 << 0)
#       define ZB_ZCACHE_CTLSTAT_ZC_FLUSH_FLUSH_AND_FREE (1 << 0)
#       define ZB_ZCACHE_CTLSTAT_ZC_FREE_NO_EFFECT       (0 << 1)
#       define ZB_ZCACHE_CTLSTAT_ZC_FREE_FREE            (1 << 1)
#       define ZB_ZCACHE_CTLSTAT_ZC_BUSY_IDLE            (0 << 1)
#       define ZB_ZCACHE_CTLSTAT_ZC_BUSY_BUSY            (1 << 1)

#define R300_ZB_BW_CNTL                     0x4f1c
#	define R300_HIZ_DISABLE                              (0 << 0)
#	define R300_HIZ_ENABLE                               (1 << 0)
#	define R300_HIZ_MIN                                  (0 << 1)
#	define R300_HIZ_MAX                                  (1 << 1)
#	define R300_FAST_FILL_DISABLE                        (0 << 2)
#	define R300_FAST_FILL_ENABLE                         (1 << 2)
#	define R300_RD_COMP_DISABLE                          (0 << 3)
#	define R300_RD_COMP_ENABLE                           (1 << 3)
#	define R300_WR_COMP_DISABLE                          (0 << 4)
#	define R300_WR_COMP_ENABLE                           (1 << 4)
#	define R300_ZB_CB_CLEAR_RMW                          (0 << 5)
#	define R300_ZB_CB_CLEAR_CACHE_LINEAR                 (1 << 5)
#	define R300_FORCE_COMPRESSED_STENCIL_VALUE_DISABLE   (0 << 6)
#	define R300_FORCE_COMPRESSED_STENCIL_VALUE_ENABLE    (1 << 6)
#	define R300_ZEQUAL_OPTIMIZE_ENABLE                   (0 << 7)
#	define R300_ZEQUAL_OPTIMIZE_DISABLE                  (1 << 7)
#	define R300_SEQUAL_OPTIMIZE_ENABLE                   (0 << 8)
#	define R300_SEQUAL_OPTIMIZE_DISABLE                  (1 << 8)
/* gap in AMD docs */
#	define R300_BMASK_ENABLE                             (0 << 10)
#	define R300_BMASK_DISABLE                            (1 << 10)
#	define R300_HIZ_EQUAL_REJECT_DISABLE                 (0 << 11)
#	define R300_HIZ_EQUAL_REJECT_ENABLE                  (1 << 11)
#	define R300_HIZ_FP_EXP_BITS_DISABLE                  (0 << 12)
#	define R300_HIZ_FP_EXP_BITS_1                        (1 << 12)
#	define R300_HIZ_FP_EXP_BITS_2                        (2 << 12)
#	define R300_HIZ_FP_EXP_BITS_3                        (3 << 12)
#	define R300_HIZ_FP_EXP_BITS_4                        (4 << 12)
#	define R300_HIZ_FP_EXP_BITS_5                        (5 << 12)
#	define R300_HIZ_FP_INVERT_LEADING_ONES               (0 << 15)
#	define R300_HIZ_FP_INVERT_LEADING_ZEROS              (1 << 15)
#	define R300_TILE_OVERWRITE_RECOMPRESSION_ENABLE      (0 << 16)
#	define R300_TILE_OVERWRITE_RECOMPRESSION_DISABLE     (1 << 16)
#	define R300_CONTIGUOUS_6XAA_SAMPLES_ENABLE           (0 << 17)
#	define R300_CONTIGUOUS_6XAA_SAMPLES_DISABLE          (1 << 17)
#	define R300_PEQ_PACKING_DISABLE                      (0 << 18)
#	define R300_PEQ_PACKING_ENABLE                       (1 << 18)
#	define R300_COVERED_PTR_MASKING_DISABLE              (0 << 18)
#	define R300_COVERED_PTR_MASKING_ENABLE               (1 << 18)


/* gap */

/* Z Buffer Address Offset.
 * Bits 31 to 5 are used for aligned Z buffer address offset for macro tiles.
 */
#define ZB_DEPTHOFFSET               0x4f20

/* Z Buffer Pitch and Endian Control */
#define ZB_DEPTHPITCH                0x4f24
#       define R300_DEPTHPITCH_MASK              0x00001FF8 /* TODO: should be (13:2) */
#       define ZB_DEPTHPITCH_DEPTHMACROTILE_DISABLE      (0 << 16)
#       define ZB_DEPTHPITCH_DEPTHMACROTILE_ENABLE       (1 << 16)
#       define ZB_DEPTHPITCH_DEPTHMICROTILE_LINEAR       (0 << 17)
#       define ZB_DEPTHPITCH_DEPTHMICROTILE_TILED        (1 << 17)
#       define ZB_DEPTHPITCH_DEPTHMICROTILE_TILED_SQUARE (2 << 17)
#       define ZB_DEPTHPITCH_DEPTHENDIAN_NO_SWAP         (0 << 18)
#       define ZB_DEPTHPITCH_DEPTHENDIAN_WORD_SWAP       (1 << 18)
#       define ZB_DEPTHPITCH_DEPTHENDIAN_DWORD_SWAP      (2 << 18)
#       define ZB_DEPTHPITCH_DEPTHENDIAN_HALF_DWORD_SWAP (3 << 18)

/* Z Buffer Clear Value */
#define ZB_DEPTHCLEARVALUE                  0x4f28

/* Hierarchical Z Memory Offset */
#define ZB_HIZ_OFFSET                       0x4f44

/* Hierarchical Z Read Index */
#define ZB_HIZ_RDINDEX                      0x4f48

/* Hierarchical Z Data */
#define ZB_HIZ_DWORD                        0x4f4c

/* Hierarchical Z Write Index */
#define ZB_HIZ_WRINDEX                      0x4f50

/* Hierarchical Z Pitch */
#define ZB_HIZ_PITCH                        0x4f54

/* Z Buffer Z Pass Counter Data */
#define ZB_ZPASS_DATA                       0x4f58

/* Z Buffer Z Pass Counter Address */
#define ZB_ZPASS_ADDR                       0x4f5c

/* Depth buffer X and Y coordinate offset */
#define ZB_DEPTHXY_OFFSET                   0x4f60
#	define ZB_DEPTHX_OFFSET_SHIFT  1
#	define ZB_DEPTHX_OFFSET_MASK   0x000007FE
#	define ZB_DEPTHY_OFFSET_SHIFT  17
#	define ZB_DEPTHY_OFFSET_MASK   0x07FE0000

/* Sets the fifo sizes */
#define ZB_FIFO_SIZE                        0x4fd0
#	define ZB_FIFO_SIZE_OP_FIFO_SIZE_FULL   (0 << 0)
#	define ZB_FIFO_SIZE_OP_FIFO_SIZE_HALF   (1 << 0)
#	define ZB_FIFO_SIZE_OP_FIFO_SIZE_QUATER (2 << 0)
#	define ZB_FIFO_SIZE_OP_FIFO_SIZE_EIGTHS (4 << 0)

/* Stencil Reference Value and Mask for backfacing quads */
#define ZB_STENCILREFMASK_BF                0x4fd4
#	define ZB_STENCILREFMASK_BF_STENCILREF_SHIFT       0
#	define ZB_STENCILREFMASK_BF_STENCILREF_MASK        0x000000ff
#	define ZB_STENCILREFMASK_BF_STENCILMASK_SHIFT      8
#	define ZB_STENCILREFMASK_BF_STENCILMASK_MASK       0x0000ff00
#	define ZB_STENCILREFMASK_BF_STENCILWRITEMASK_SHIFT 16
#	define ZB_STENCILREFMASK_BF_STENCILWRITEMASK_MASK  0xffff0000

/**
 * \defgroup R3XX_R5XX_PROGRAMMABLE_VERTEX_SHADER_DESCRIPTION R3XX-R5XX PROGRAMMABLE VERTEX SHADER DESCRIPTION
 *
 * The PVS_DST_MATH_INST is used to identify whether the instruction is a Vector
 * Engine instruction or a Math Engine instruction.
 */

/*\{*/

enum {
	/* R3XX */
	VECTOR_NO_OP			= 0,
	VE_DOT_PRODUCT			= 1,
	VE_MULTIPLY			= 2,
	VE_ADD				= 3,
	VE_MULTIPLY_ADD			= 4,
	VE_DISTANCE_VECTOR		= 5,
	VE_FRACTION			= 6,
	VE_MAXIMUM			= 7,
	VE_MINIMUM			= 8,
	VE_SET_GREATER_THAN_EQUAL	= 9,
	VE_SET_LESS_THAN		= 10,
	VE_MULTIPLYX2_ADD		= 11,
	VE_MULTIPLY_CLAMP		= 12,
	VE_FLT2FIX_DX			= 13,
	VE_FLT2FIX_DX_RND		= 14,
	/* R5XX */
	VE_PRED_SET_EQ_PUSH		= 15,
	VE_PRED_SET_GT_PUSH		= 16,
	VE_PRED_SET_GTE_PUSH		= 17,
	VE_PRED_SET_NEQ_PUSH		= 18,
	VE_COND_WRITE_EQ		= 19,
	VE_COND_WRITE_GT		= 20,
	VE_COND_WRITE_GTE		= 21,
	VE_COND_WRITE_NEQ		= 22,
	VE_COND_MUX_EQ			= 23,
	VE_COND_MUX_GT			= 24,
	VE_COND_MUX_GTE			= 25,
	VE_SET_GREATER_THAN		= 26,
	VE_SET_EQUAL			= 27,
	VE_SET_NOT_EQUAL		= 28,
};

enum {
	/* R3XX */
	MATH_NO_OP			= 0,
	ME_EXP_BASE2_DX			= 1,
	ME_LOG_BASE2_DX			= 2,
	ME_EXP_BASEE_FF			= 3,
	ME_LIGHT_COEFF_DX		= 4,
	ME_POWER_FUNC_FF		= 5,
	ME_RECIP_DX			= 6,
	ME_RECIP_FF			= 7,
	ME_RECIP_SQRT_DX		= 8,
	ME_RECIP_SQRT_FF		= 9,
	ME_MULTIPLY			= 10,
	ME_EXP_BASE2_FULL_DX		= 11,
	ME_LOG_BASE2_FULL_DX		= 12,
	ME_POWER_FUNC_FF_CLAMP_B	= 13,
	ME_POWER_FUNC_FF_CLAMP_B1	= 14,
	ME_POWER_FUNC_FF_CLAMP_01	= 15,
	ME_SIN				= 16,
	ME_COS				= 17,
	/* R5XX */
	ME_LOG_BASE2_IEEE		= 18,
	ME_RECIP_IEEE			= 19,
	ME_RECIP_SQRT_IEEE		= 20,
	ME_PRED_SET_EQ			= 21,
	ME_PRED_SET_GT			= 22,
	ME_PRED_SET_GTE			= 23,
	ME_PRED_SET_NEQ			= 24,
	ME_PRED_SET_CLR			= 25,
	ME_PRED_SET_INV			= 26,
	ME_PRED_SET_POP			= 27,
	ME_PRED_SET_RESTORE		= 28,
};

enum {
	PVS_SRC_REG_TEMPORARY		= 0,	/* Intermediate Storage */
	PVS_SRC_REG_INPUT		= 1,	/* Input Vertex Storage */
	PVS_SRC_REG_CONSTANT		= 2,	/* Constant State Storage */
	PVS_SRC_REG_ALT_TEMPORARY	= 3,	/* Alternate Intermediate Storage */
};

enum {
	PVS_DST_REG_TEMPORARY		= 0,	/* Intermediate Storage */
	PVS_DST_REG_A0			= 1,	/* Address Register Storage */
	PVS_DST_REG_OUT			= 2,	/* Output Memory. Used for all outputs */
	PVS_DST_REG_OUT_REPL_X		= 3,	/* Output Memory & Replicate X to all channels */
	PVS_DST_REG_ALT_TEMPORARY	= 4,	/* Alternate Intermediate Storage */
	PVS_DST_REG_INPUT		= 5,	/* Output Memory & Replicate X to all channels */
};

/*\}*/

/*\{*/

#define R300_VPI_OUT_OP_EXP                     (65 << 0)
#define R300_VPI_OUT_OP_LOG                     (66 << 0)
	/* Used in fog computations, scalar(scalar) */
#define R300_VPI_OUT_OP_UNK67                   (67 << 0)
#define R300_VPI_OUT_OP_LIT                     (68 << 0)
#define R300_VPI_OUT_OP_POW                     (69 << 0)
#define R300_VPI_OUT_OP_RCP                     (70 << 0)
#define R300_VPI_OUT_OP_RSQ                     (72 << 0)
	/* Used in GL_POINT_DISTANCE_ATTENUATION_ARB, scalar(scalar) */
#define R300_VPI_OUT_OP_UNK73                   (73 << 0)
#define R300_VPI_OUT_OP_EX2                     (75 << 0)
#define R300_VPI_OUT_OP_LG2                     (76 << 0)
#define R300_VPI_OUT_OP_MAD_2                   (128 << 0)
	/* all temps, vector(scalar, vector, vector) */
#define R300_VPI_OUT_OP_UNK129                  (129 << 0)

#define R300_VPI_OUT_REG_CLASS_TEMPORARY        (0 << 8)
#define R300_VPI_OUT_REG_CLASS_ADDR             (1 << 8)
#define R300_VPI_OUT_REG_CLASS_RESULT           (2 << 8)
#define R300_VPI_OUT_REG_CLASS_MASK             (31 << 8)

#define R300_VPI_OUT_REG_INDEX_SHIFT            13
	/* GUESS based on fglrx native limits */
#define R300_VPI_OUT_REG_INDEX_MASK             (31 << 13)

#define R300_VPI_OUT_WRITE_X                    (1 << 20)
#define R300_VPI_OUT_WRITE_Y                    (1 << 21)
#define R300_VPI_OUT_WRITE_Z                    (1 << 22)
#define R300_VPI_OUT_WRITE_W                    (1 << 23)

#define R300_VPI_IN_REG_CLASS_TEMPORARY         (0 << 0)
#define R300_VPI_IN_REG_CLASS_ATTRIBUTE         (1 << 0)
#define R300_VPI_IN_REG_CLASS_PARAMETER         (2 << 0)
#define R300_VPI_IN_REG_CLASS_NONE              (9 << 0)
#define R300_VPI_IN_REG_CLASS_MASK              (31 << 0)

#define R300_VPI_IN_REG_INDEX_SHIFT             5
	/* GUESS based on fglrx native limits */
#define R300_VPI_IN_REG_INDEX_MASK              (255 << 5)

/* The R300 can select components from the input register arbitrarily.
 * Use the following constants, shifted by the component shift you
 * want to select
 */
#define R300_VPI_IN_SELECT_X    0
#define R300_VPI_IN_SELECT_Y    1
#define R300_VPI_IN_SELECT_Z    2
#define R300_VPI_IN_SELECT_W    3
#define R300_VPI_IN_SELECT_ZERO 4
#define R300_VPI_IN_SELECT_ONE  5
#define R300_VPI_IN_SELECT_MASK 7

#define R300_VPI_IN_X_SHIFT                     13
#define R300_VPI_IN_Y_SHIFT                     16
#define R300_VPI_IN_Z_SHIFT                     19
#define R300_VPI_IN_W_SHIFT                     22

#define R300_VPI_IN_NEG_X                       (1 << 25)
#define R300_VPI_IN_NEG_Y                       (1 << 26)
#define R300_VPI_IN_NEG_Z                       (1 << 27)
#define R300_VPI_IN_NEG_W                       (1 << 28)

/*\}*/

/* BEGIN: Packet 3 commands */

/* A primitive emission dword. */
#define R300_PRIM_TYPE_NONE                     (0 << 0)
#define R300_PRIM_TYPE_POINT                    (1 << 0)
#define R300_PRIM_TYPE_LINE                     (2 << 0)
#define R300_PRIM_TYPE_LINE_STRIP               (3 << 0)
#define R300_PRIM_TYPE_TRI_LIST                 (4 << 0)
#define R300_PRIM_TYPE_TRI_FAN                  (5 << 0)
#define R300_PRIM_TYPE_TRI_STRIP                (6 << 0)
#define R300_PRIM_TYPE_TRI_TYPE2                (7 << 0)
#define R300_PRIM_TYPE_RECT_LIST                (8 << 0)
#define R300_PRIM_TYPE_3VRT_POINT_LIST          (9 << 0)
#define R300_PRIM_TYPE_3VRT_LINE_LIST           (10 << 0)
	/* GUESS (based on r200) */
#define R300_PRIM_TYPE_POINT_SPRITES            (11 << 0)
#define R300_PRIM_TYPE_LINE_LOOP                (12 << 0)
#define R300_PRIM_TYPE_QUADS                    (13 << 0)
#define R300_PRIM_TYPE_QUAD_STRIP               (14 << 0)
#define R300_PRIM_TYPE_POLYGON                  (15 << 0)
#define R300_PRIM_TYPE_MASK                     0xF
#define R300_PRIM_WALK_IND                      (1 << 4)
#define R300_PRIM_WALK_LIST                     (2 << 4)
#define R300_PRIM_WALK_RING                     (3 << 4)
#define R300_PRIM_WALK_MASK                     (3 << 4)
	/* GUESS (based on r200) */
#define R300_PRIM_COLOR_ORDER_BGRA              (0 << 6)
#define R300_PRIM_COLOR_ORDER_RGBA              (1 << 6)
#define R300_PRIM_NUM_VERTICES_SHIFT            16
#define R300_PRIM_NUM_VERTICES_MASK             0xffff

/* Draw a primitive from vertex data in arrays loaded via 3D_LOAD_VBPNTR.
 * Two parameter dwords:
 * 0. VAP_VTX_FMT: The first parameter is not written to hardware
 * 1. VAP_VF_CTL: The second parameter is a standard primitive emission dword.
 */
#define R300_PACKET3_3D_DRAW_VBUF           0x00002800

/* Draw a primitive from immediate vertices in this packet
 * Up to 16382 dwords:
 * 0. VAP_VTX_FMT: The first parameter is not written to hardware
 * 1. VAP_VF_CTL: The second parameter is a standard primitive emission dword.
 * 2 to end: Up to 16380 dwords of vertex data.
 */
#define R300_PACKET3_3D_DRAW_IMMD           0x00002900

/* Draw a primitive from vertex data in arrays loaded via 3D_LOAD_VBPNTR and
 * immediate vertices in this packet
 * Up to 16382 dwords:
 * 0. VAP_VTX_FMT: The first parameter is not written to hardware
 * 1. VAP_VF_CTL: The second parameter is a standard primitive emission dword.
 * 2 to end: Up to 16380 dwords of vertex data.
 */
#define R300_PACKET3_3D_DRAW_INDX           0x00002A00
 

/* Specify the full set of vertex arrays as (address, stride).
 * The first parameter is the number of vertex arrays specified.
 * The rest of the command is a variable length list of blocks, where
 * each block is three dwords long and specifies two arrays.
 * The first dword of a block is split into two words, the lower significant
 * word refers to the first array, the more significant word to the second
 * array in the block.
 * The low byte of each word contains the size of an array entry in dwords,
 * the high byte contains the stride of the array.
 * The second dword of a block contains the pointer to the first array,
 * the third dword of a block contains the pointer to the second array.
 * Note that if the total number of arrays is odd, the third dword of
 * the last block is omitted.
 */
#define R300_PACKET3_3D_LOAD_VBPNTR         0x00002F00

#define R300_PACKET3_INDX_BUFFER            0x00003300
#    define R300_EB_UNK1_SHIFT                      24
#    define R300_EB_UNK1                    (0x80<<24)
#    define R300_EB_UNK2                        0x0810

/* Same as R300_PACKET3_3D_DRAW_VBUF but without VAP_VTX_FMT */
#define R300_PACKET3_3D_DRAW_VBUF_2         0x00003400
/* Same as R300_PACKET3_3D_DRAW_IMMD but without VAP_VTX_FMT */
#define R300_PACKET3_3D_DRAW_IMMD_2         0x00003500
/* Same as R300_PACKET3_3D_DRAW_INDX but without VAP_VTX_FMT */
#define R300_PACKET3_3D_DRAW_INDX_2         0x00003600

/* Clears a portion of hierachical Z RAM 
 * 3 dword parameters
 * 0. START
 * 1. COUNT: 13:0 (max is 0x3FFF)
 * 2. CLEAR_VALUE: Value to write into HIZ RAM.
 */
#define R300_PACKET3_3D_CLEAR_HIZ           0x00003700

/* Draws a set of primitives using vertex buffers pointed by the state data.
 * At least 2 Parameters:
 * 0. VAP_VF_CNTL: The first parameter is a standard primitive emission dword.
 * 2 to end: Data or indices (see other 3D_DRAW_* packets for details)
 */
#define R300_PACKET3_3D_DRAW_128            0x00003900

/* END: Packet 3 commands */


/* Color formats for 2d packets
 */
#define R300_CP_COLOR_FORMAT_CI8	2
#define R300_CP_COLOR_FORMAT_ARGB1555	3
#define R300_CP_COLOR_FORMAT_RGB565	4
#define R300_CP_COLOR_FORMAT_ARGB8888	6
#define R300_CP_COLOR_FORMAT_RGB332	7
#define R300_CP_COLOR_FORMAT_RGB8	9
#define R300_CP_COLOR_FORMAT_ARGB4444	15

/*
 * CP type-3 packets
 */
#define R300_CP_CMD_BITBLT_MULTI	0xC0009B00

#endif /* _R300_REG_H */

/* *INDENT-ON* */

/* vim: set foldenable foldmarker=\\{,\\} foldmethod=marker : */